e1000e: Use standard #defines for PCIe Capability ASPM fields

Use the standard #defines for PCIe Capability ASPM fields.

Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits.  PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: e1000-devel@lists.sourceforge.net
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -5548,14 +5548,21 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 #else
 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 {
+	u16 aspm_ctl = 0;
+
+	if (state & PCIE_LINK_STATE_L0S)
+		aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S;
+	if (state & PCIE_LINK_STATE_L1)
+		aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1;
+
 	/* Both device and parent should have the same ASPM setting.
 	 * Disable ASPM in downstream component first and then upstream.
 	 */
-	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state);
+	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl);
 
 	if (pdev->bus->self)
 		pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL,
-					   state);
+					   aspm_ctl);
 }
 #endif
 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)