[ Upstream commit 4c434392c4777881d01beada6701eff8c76b43fe ]
'first_minor' represents the starting minor number of disks, and
'minors' represents the number of partitions in the device. Neither
of them can be greater than MINORMASK + 1.
Commit e338924bd0 ("block: check minor range in device_add_disk()")
only added the check of 'first_minor + minors'. However, their sum might
be less than MINORMASK but their values are wrong. Complete the checks now.
Fixes: e338924bd0 ("block: check minor range in device_add_disk()")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231219075942.840255-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fa3d1a00c2d4ba14f1300371ad39d5456e890d7 ]
On the error path of device_add_disk(), device's memalloc_noio flag was
set but not cleared. As the comment of pm_runtime_set_memalloc_noio(),
"The function should be called between device_add() and device_del()".
Clear this flag before device_del() now.
Fixes: 25e823c8c3 ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e7eac647 ]
The GENHD_FL_NO_PART_SCAN controls more than just partitions canning,
so rename it to GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122130625.1136848-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a721de848 ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d90db3b1c8 ]
Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.
Fixes: 89f871af1b ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d1868328de upstream.
ida_alloc_range(..., min, max, ...) returns values from min to max,
inclusive.
So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor().
This is an issue because in device_add_disk(), this value is used in:
ddev->devt = MKDEV(disk->major, disk->first_minor);
and NR_EXT_DEVT is '(1 << MINORBITS)'.
So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow.
Fixes: 22ae8ce8b8 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b81e0c2372 upstream.
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>a
Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
[ resolves MIPS build failure by luck, root cause needs to be fixed in
Linus's tree properly, but this is needed for now to fix the build - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a5428dcb7 upstream.
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb8 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e338924bd0 ]
ioctl(fd, LOOP_CTL_ADD, 1048576) causes
sysfs: cannot create duplicate filename '/dev/block/7:0'
message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0)
due to MINORMASK == 1048575. Verify that all minor numbers for that device
fit in the minor range.
Reported-by: wangyangbo <wangyangbo@uniontech.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/b1b19379-23ee-5379-0eb5-94bf5f79f1b4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99d8690aae ]
One device_add is called disk->ev will be freed by disk_release, so we
should free it twice. Fix this by allocating disk->ev after device_add
so that the extra local unwinding can be removed entirely.
Based on an earlier patch from Tetsuo Handa.
Reported-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com>
Fixes: 83cbce9574 ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211221161851.788424-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe7d064fa3 ]
Commit 83cbce9574 ("block: add error handling for device_add_disk /
add_disk") added error handling to device_add_disk(), however the goto
label for the kobject_create_and_add() failure did not set the return
value correctly, and so we can end up in a situation where
kobject_create_and_add() fails but we report success.
Fixes: 83cbce9574 ("block: add error handling for device_add_disk / add_disk")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211103164023.1384821-1-mcgrof@kernel.org
[axboe: fold in followup fix from Wu Bo <wubo40@huawei.com>]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Before removing disk from sysfs, userspace still may change queue via
sysfs, such as switching elevator or setting wbt latency, both may
reinitialize wbt, then the warning in blk_free_queue_stats() will be
triggered since rq_qos_exit() is moved to del_gendisk().
Fixes the issue by moving draining queue & tearing down after disk is
removed from sysfs, at that time no one can come into queue's
store()/show().
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211026101204.2897166-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't switch back to percpu mode to avoid the double RCU grace period
when tearing down SCSI devices. After removing the disk only passthrough
commands can be send anyway.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of delaying draining of file system I/O related items like the
blk-qos queues, the integrity read workqueue and timeouts only when the
request_queue is removed, do that when del_gendisk is called. This is
important for SCSI where the upper level drivers that control the gendisk
are separate entities, and the disk can be freed much earlier than the
request_queue, or can even be unbound without tearing down the queue.
Fixes: edb0872f44 ("block: move the bdi from the request_queue to the gendisk")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot is reporting use-after-free read at bdev_free_inode() [1], for
kfree() from __alloc_disk_node() is called before bdev_free_inode()
(which is called after RCU grace period) reads bdev->bd_disk and calls
kfree(bdev->bd_disk).
Fix use-after-free read followed by double kfree() problem
by making sure that bdev->bd_disk is NULL when calling iput().
Link: https://syzkaller.appspot.com/bug?extid=8281086e8a6fbfbd952a [1]
Reported-by: syzbot <syzbot+8281086e8a6fbfbd952a@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/e6dd13c5-8db0-4392-6e78-a42ee5d2a1c4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
hidden gendisks will never be marked live.
Fixes: 40b3a52ffc ("block: add a sanity check for a live disk in del_gendisk")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824144310.1487816-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This might have been a neat debug aid when the extended dev_t was
added, but that time is long gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824075216.1179406-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_alloc_ext_minor already returns just a minor number, so no need to
mask the high bits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824075216.1179406-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Properly unwind on errors in device_add_disk. This is the initial work
as drivers are not converted yet, which will follow in separate patches.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: major rebase. All bugs are probably mine]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that all the sysfs bits are set up before bdev_add is called,
as that will make the upcomding error handling much easier. However
this means the call to disk_update_readahead has to be split as that
requires a bdi. Also remove various sanity checks that don't make
sense now that blk_register_queue only has a single caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210818144542.19305-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Doing all the sysfs file creation before adding the bdev and thus
allowing it to be opened will simplify the about to be added error
handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once bdev_add is called userspace can open the block device. Ensure
that the struct device, which is used for refcounting of the disk
besides various other things, is fully setup at that point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no real reason these should be separate. Also simplify the
groups assignment a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210818144542.19305-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a sanity check to del_gendisk to do nothing when the disk wasn't
successfully added. This papers over the complete lack of add_disk
error handling, which is about to get fixed gradually.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the magic lookup through the kobject tree with an explicit
backpointer, given that the device model links are set up and torn
down at times when I/O is still possible, leading to potential
NULL or invalid pointer dereferences.
Fixes: edb0872f44 ("block: move the bdi from the request_queue to the gendisk")
Reported-by: syzbot <syzbot+aa0801b6b32dca9dda82@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20210816134624.GA24234@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acquire the queue ref dropped in disk_release in __blk_alloc_disk so any
allocate gendisk always has a queue reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass in a request_queue and assign disk->queue in __blk_alloc_disk to
ensure struct gendisk always has a valid ->queue pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This was a leftover from the legacy alloc_disk interface. Switch
the scsi ULPs and dasd to set ->minors directly like all other
drivers and remove the argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd]
Link: https://lore.kernel.org/r/20210816131910.615153-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the lockdep name to the low-level __blk_alloc_disk helper and
hardcode the name for it given that the number of minors or node_id
are not very useful information. While this passes a pointless
argument for non-lockdep builds that is not really an issue as
disk allocation is a probe time only slow path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
inode_detach_wb references the "main" bdi of the inode. With the
recent change to move the bdi from the request_queue to the gendisk
this causes a guaranteed use after free when using certain cgroup
configurations. The big itself is older through as any non-default
inode reference (e.g. an open file descriptor) could have injected
this use after free even before that.
Fixes: 52ebea749a ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: syzbot <syzbot+1fb38bb7d3ce0fa3e1c4@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816122614.601358-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dev_t is used as the inode hash, so we should only released it
once then block device inode is gone from the inode cache. Move it
to bdev_free_inode to ensure that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816122614.601358-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check inode_unhashed on the whole device bdev inode instead,
and provide a helper to check for that information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The backing device information only makes sense for file system I/O,
and thus belongs into the gendisk and not the lower level request_queue
structure. Move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that device mapper has been changed to register the disk once
it is fully ready all this code is unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
device mapper needs to register holders before it is ready to do I/O.
Currently it does so by registering the disk early, which can leave
the disk and queue in a weird half state where the queue is registered
with the disk, except for sysfs and the elevator. And this state has
been a bit promlematic before, and will get more so when sorting out
the responsibilities between the queue and the disk.
Support registering holders on an initialized but not registered disk
instead by delaying the sysfs registration until the disk is registered.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Invert they way the holder relations are tracked. This very
slightly reduces the memory overhead for partitioned devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210804094147.459763-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new sysfs handle to export the new diskseq value.
Place it in <sysfs>/block/<disk>/diskseq and document it.
$ grep . /sys/class/block/*/diskseq
/sys/class/block/loop0/diskseq:13
/sys/class/block/loop1/diskseq:14
/sys/class/block/loop2/diskseq:5
/sys/class/block/loop3/diskseq:6
/sys/class/block/ram0/diskseq:1
/sys/class/block/ram1/diskseq:2
/sys/class/block/vda/diskseq:7
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Associating uevents with block devices in userspace is difficult and racy:
the uevent netlink socket is lossy, and on slow and overloaded systems
has a very high latency.
Block devices do not have exclusive owners in userspace, any process can
set one up (e.g. loop devices). Moreover, device names can be reused
(e.g. loop0 can be reused again and again). A userspace process setting
up a block device and watching for its events cannot thus reliably tell
whether an event relates to the device it just set up or another earlier
instance with the same name.
Being able to set a UUID on a loop device would solve the race conditions.
But it does not allow to derive orderings from uevents: if you see a
uevent with a UUID that does not match the device you are waiting for,
you cannot tell whether it's because the right uevent has not arrived yet,
or it was already sent and you missed it. So you cannot tell whether you
should wait for it or not.
Associating a unique, monotonically increasing sequential number to the
lifetime of each block device, which can be retrieved with an ioctl
immediately upon setting it up, allows to solve the race conditions with
uevents, and also allows userspace processes to know whether they should
wait for the uevent they need or if it was dropped and thus they should
move on.
Additionally, increment the disk sequence number when the media change,
i.e. on DISK_EVENT_MEDIA_CHANGE event.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-2-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the disk_name function now that all users are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify printing the partition name by using the %pg format specifier
that is equivalent to a bdevname call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I have compiled the kernel with a cross compiler "hppa-linux-gnu-" v9.3.0
on x86-64 host machine. I got the following warning:
block/genhd.c: In function ‘diskstats_show’:
block/genhd.c:1227:1: warning: the frame size of 1688 bytes is larger
than 1280 bytes [-Wframe-larger-than=]
1227 | }
By Reduced the stack footprint by using the %pg printk specifier instead
of disk_name to remove the need for the on-stack buffer.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unhash the whole device inode early in del_gendisk. This allows to
remove the first GENHD_FL_UP check in the open path as we simply
won't find a just removed inode. The second non-racy check after
taking open_mutex is still kept.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210722075402.983367-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkdev_get_no_open acquires a reference to the block_device through
the block device inode and then tries to acquire a device model
reference to the gendisk. But at this point the disk migh already
be freed (although the race is free). Fix this by only freeing the
gendisk from the whole device bdevs ->free_inode callback as well.
Fixes: 22ae8ce8b8 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Li Nan
Christoph Hellwig
Chen Zhongjin
Christophe JAILLET
Tetsuo Handa
Ming Lei
Luis Chamberlain
Matteo Croce
Abd-Alrhman Masalkhi