[ Upstream commit 78034cbece ]
This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.
Fixes: 1357dfd726 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7295a996fd ]
If a duplicate attribute is found using kset_find_obj(),
a reference to that attribute is returned. This means
that we need to dispose it accordingly. Use kobject_put()
to dispose the duplicate attribute in such a case.
Compile-tested only.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230805053610.7106-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0848cab765 ]
rshim console does not show all entries of dmesg.
Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <shihyic@nvidia.com>
Reviewed-by: Liming Sung <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230821150627.26075-1-shihyic@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c21733754c ]
Currently huawei-wmi causes a lot of spam in dmesg on my
Huawei MateBook X Pro 2022:
...
[36409.328463] input input9: Unknown key pressed, code: 0x02c1
[36411.335104] input input9: Unknown key pressed, code: 0x02c1
[36412.338674] input input9: Unknown key pressed, code: 0x02c1
[36414.848564] input input9: Unknown key pressed, code: 0x02c1
[36416.858706] input input9: Unknown key pressed, code: 0x02c1
...
Fix that by ignoring events generated by ambient light sensor.
This issue was reported on GitHub and resolved with the following merge
request:
https://github.com/aymanbagabas/Huawei-WMI/pull/70
I've contacted the mainter of this repo and he gave me the "go ahead" to
send this patch to the maling list.
Signed-off-by: Konstantin Shelekhin <k.shelekhin@ftml.net>
Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7783e97f85 ]
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.
Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.
Tested with BIOS 1.13.1.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ab18de2b ]
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad084a6d99 ]
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:
1. The initial HW state is always unblocked, regardless of the actual
state on boot, because msi_init_rfkill only sets the SW state,
regardless of ec_read_only.
2. The initial SW state corresponds to the actual state on boot, but it
can't be changed afterwards, because set_device_state returns
-EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth
unusable if it was blocked on boot, and breaking the airplane mode if
the rfkill was unblocked on boot.
Address the above issues by properly initializing the HW state on
ec_read_only laptops and by allowing the userspace to toggle the SW
state. Don't set the SW state ourselves and let the userspace fully
control it. Toggling the SW state is a no-op, however, it allows the
userspace to properly toggle the airplane mode. The actual SW radio
disablement is handled by the corresponding rtl818x_pci and btusb
drivers that have their own rfkills.
Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130.
Fixes: 0816392b97 ("msi-laptop: merge quirk tables to one")
Fixes: 0de6575ad0 ("msi-laptop: Add MSI Wind U90/U100 support")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 028e6e204a ]
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385f ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Fixes: 844af950da ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com
Tested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5431bf1e6 ]
Move some variables in order to keep them
in the narrowest possible scope.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210904175450.156801-22-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67f472fdac ]
Instead of hard-coding a 16 long byte array,
use the available `guid_t` type and related methods.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210904175450.156801-15-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84eacf7e64 ]
The GUID block is available for `wmi_create_device()`
through `wblock->gblock`. Use that consistently in
the function instead of using a mix of `gblock` and
`wblock->gblock`.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210904175450.156801-8-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 362c1f2ec8 ]
On ASUS GU604V the key 0x7B is issued when the charger is connected or
disconnected, and key 0xC0 is issued when an external display is
connected or disconnected.
This commit maps them to KE_IGNORE to slience kernel messages about
unknown keys, such as:
kernel: asus_wmi: Unknown key code 0x7b
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 539e0a7f91 ]
Currently, event completion work-items are restricted to be run strictly
in non-parallel fashion by the respective workqueue. However, this has
lead to some problems:
In some instances, the event notifier function called inside this
completion workqueue takes a non-negligible amount of time to execute.
One such example is the battery event handling code (surface_battery.c),
which can result in a full battery information refresh, involving
further synchronous communication with the EC inside the event handler.
This is made worse if the communication fails spuriously, generally
incurring a multi-second timeout.
Since the event completions are run strictly non-parallel, this blocks
other events from being propagated to the respective subsystems. This
becomes especially noticeable for keyboard and touchpad input, which
also funnel their events through this system. Here, users have reported
occasional multi-second "freezes".
Note, however, that the event handling system was never intended to run
purely sequentially. Instead, we have one work struct per EC/SAM
subsystem, processing the event queue for that subsystem. These work
structs were intended to run in parallel, allowing sequential processing
of work items for each subsystem but parallel processing of work items
across subsystems.
The only restriction to this is the way the workqueue is created.
Therefore, replace create_workqueue() with alloc_workqueue() and do not
restrict the maximum number of parallel work items to be executed on
that queue, resolving any cross-subsystem blockage.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Link: https://github.com/linux-surface/linux-surface/issues/1026
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230525210110.2785470-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9b6850c7 ]
This id was removed in commit b47018a778 ("platform/x86: intel_scu_ipc:
Remove Lincroft support"), saying it is only used on Moorestown,
but apparently the same id is also used on Medfield.
Tested on the Medfield based Motorola RAZR i smartphone.
Signed-off-by: Julian Winkler <julian.winkler1@web.de>
Link: https://lore.kernel.org/r/20230416154932.6579-1-julian.winkler1@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbb320bfe2 ]
Stop restricting the PCI search to a range of PCI domains fed to
pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and
look at all PCI domains in one pass.
On systems with more than 8 sockets, this avoids error messages like
"Information: Invalid level, Can't get TDP control information at
specified levels on cpu 480" from the intel speed select utility.
Fixes: aa2ddd2425 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping")
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230519160420.2588475-1-steve.wahl@hpe.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a1aac8a96 ]
On a multiple package system using Sub-NUMA clustering, there is an issue
in mapping Linux CPU number to PUNIT PCI device when manufacturer decided
to reuse the PCI bus number across packages. Bus number can be reused as
long as they are in different domain or segment. In this case some CPU
will fail to find a PCI device to issue SST requests.
When bus numbers are reused across CPU packages, we are using proximity
information by matching CPU numa node id to PUNIT PCI device numa node
id. But on a package there can be only one PUNIT PCI device, but multiple
numa nodes (one for each sub cluster). So, the numa node ID of the PUNIT
PCI device can only match with one numa node id of CPUs in a sub cluster
in the package.
Since there can be only one PUNIT PCI device per package, if we match
with numa node id of any sub cluster in that package, we can use that
mapping for any CPU in that package. So, store the match information
in a per package data structure and return the information when there
is no match.
While here, use defines for max bus number instead of hardcoding.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220629194817.2418240-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: bbb320bfe2 ("platform/x86: ISST: Remove 8 socket limit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95e4b25192 upstream.
The sscanf() function never returns negatives. It returns the number of
items successfully read.
Fixes: 1a218d312e ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/4ccdfd28-099b-40bf-8d77-ad4ea2e76b93@kili.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e9b8992b1 ]
The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.
Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20221020201033.12790-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: decab2825c ("platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401199ffa9 ]
Add scancodes reported by the touchpad on/off button. The actual disabling
and enabling is done in hardware, and this just reports that change to
userspace.
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Link: https://lore.kernel.org/r/20220922115459.6511-1-dhould3@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: decab2825c ("platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4b65f95c87 upstream.
Add touchscreen info for the Dexp Ursus KX210i
Signed-off-by: Andrey Avdeev <jamesstoun@gmail.com>
Link: https://lore.kernel.org/r/ZE4gRgzRQCjXFYD0@avdeevavpc
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b7c994f8c3 ]
Add support for A320M-S2H V2. Tested using module force_load option.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230318091441.1240921-1-frank@crawford.emu.id.au
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7065655216 ]
On ThinkStations on retrieving the attribute value the BIOS appends the
possible values to the string.
Clean up the display in the current_value_show function so the options
part is not displayed.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Reported by Mario Limoncello <Mario.Limonciello@amd.com>
Link: https://github.com/fwupd/fwupd/issues/5077#issuecomment-1488730526
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230403013120.2105-2-mpearson-lenovo@squebb.ca
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7d796fccd ]
My previous commit introduced a memory leak where the item allocated
from tlmi_setting was not freed.
This commit also renames it to avoid confusion with the similarly name
variable in the same function.
Fixes: 8a02d70679 ("platform/x86: think-lmi: Add possible_values for ThinkStation")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/lkml/df26ff45-8933-f2b3-25f4-6ee51ccda7d8@gmx.de/T/
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230403013120.2105-1-mpearson-lenovo@squebb.ca
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3c4c05301 ]
When retriving a item string with tlmi_setting(), the result has to be
freed using kfree(). In current_value_show() however, malformed
item strings are not freed, causing a memory leak.
Fix this by eliminating the early return responsible for this.
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/platform-driver-x86/01e920bc-5882-ba0c-dd15-868bf0eca0b8@alu.unizg.hr/T/#t
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 0fdf10e5fc ("platform/x86: think-lmi: Split current_value to reflect only the value")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230331213319.41040-1-W_Armin@gmx.de
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf5ac2d45f ]
acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.
This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.
One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.
Explicitly set the direction of the pins to output to fix this.
Fixes: 5de691bffe ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f9fbc247 ]
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
Stable-dep-of: cf5ac2d45f ("platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb5755100a ]
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.
Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.
Fixes: bbab31101f ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a02d70679 ]
ThinkStation platforms don't support the API to return possible_values
but instead embed it in the settings string.
Try and extract this information and set the possible_values attribute
appropriately.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-4-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf337f27f3 ]
Some attributes don't have any values available. In those cases don't
make the possible_values entry visible.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-3-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e21289bf ]
firmware-attributes class requires that possible values are delimited
using ';' but the Lenovo firmware uses ',' instead.
Parse string and replace where appropriate.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-2-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 583329dcf2 ]
This driver was missing the mandatory type attribute...oops.
Add it in along with logic to determine whether the attribute is an
enumeration type or a string by parsing the possible_values attribute.
Upstream bug https://bugzilla.kernel.org/show_bug.cgi?id=216460
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230320003221.561750-1-mpearson-lenovo@squebb.ca
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e7e1541c9 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: ef0f62264b ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit abce209d18 upstream.
Using the serio subsystem now requires the code to be reachable:
x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'
Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.
Fixes: 8e60615e89 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e60615e89 upstream.
By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source. This matches the behavior that
Windows uses for Modern Standby as well.
It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.
For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```
In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter. The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.
Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.
When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.
This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).
This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.
It's been fixed in newer platform firmware. To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ This has been hand modified for missing dependency commits. ]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1921#note_1770257
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8fb0d9b47 upstream.
Yellow carp has been outputting versions like `1093.24.0`, but this
is supposed to be 69.24.0. That is the MSB is being interpreted
incorrectly.
The MSB is not part of the major version, but has generally been
treated that way thus far. It's actually the program, and used to
distinguish between two programs from a similar family but different
codebase.
Link: https://patchwork.freedesktop.org/patch/469993/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220120174439.12770-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40635cd32f upstream.
The amd_pmc_get_smu_version() and amd_pmc_idlemask_read() functions are
used in the probe / suspend/resume code, so they are also used when
CONFIG_DEBUGFS is disabled, move them outside of the #ifdef CONFIG_DEBUGFS
block.
Note this purely moves the code to above the #ifdef CONFIG_DEBUGFS,
the code is completely unchanged.
Fixes: f6045de1f5 ("platform/x86: amd-pmc: Export Idlemask values based on the APU")
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6045de1f5 upstream.
IdleMask is the metric used by the PM firmware to know the status of each
of the Hardware IP blocks monitored by the PM firmware.
Knowing this value is key to get the information of s2idle suspend/resume
status. This value is mapped to PMC scratch registers, retrieve them
accordingly based on the CPU family and the underlying firmware support.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210916124002.2529-1-Sanket.Goswami@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eecf2acd4a ]
Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet,
pointing to the same chuwi_vi8_data as the existing CWI506 version
DMI match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a410429a3b ]
To the best of my knowledge this is the same board as the B450M DS3H-CF,
but with an added WiFi card. Name obtained using dmidecode, tested
with force_load on v6.1.6
Signed-off-by: Kevin Kuriakose <kevinmkuriakose@gmail.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83bcf3e52e ]
Some platforms send the speaker-mute key from EC. dell-wmi can't
recognize it.
Add a new keymap for KEY_MUTE in type 0x0010 table.
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db9494895b ]
The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop.
Reported-by: Nemcev Aleksey <Nemcev_Aleksey@inbox.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230112181841.84652-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c2b9d671 ]
Add touchscreen info for the CSL Panther Tab HD.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c965daac37 ]
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ad75bd85b1 upstream.
The 0x153 version of the kbd backlight control SNC handle has no separate
address to probe if the backlight is there.
This turns the probe call into a set keyboard backlight call with a value
of 0 turning off the keyboard backlight.
Skip probing when there is no separate probe address to avoid this.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1583752
Fixes: 800f20170d ("Keyboard backlight control for some Vaio Fit models")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mattia Dongili <malattia@linux.it>
Link: https://lore.kernel.org/r/20221213122943.11123-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b7f8febd upstream.
The Lenovo Legion 5 15ARH05 needs ideapad-laptop to call SALS_FNLOCK_ON /
SALS_FNLOCK_OFF on Fn-lock state change to get the LED in the Fn key to
correctly reflect the Fn-lock state.
Add a DMI match for the Legion 5 15ARH05 to the set_fn_lock_led_list[]
table for this.
Fixes: 81a5603a0f ("platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221215154357.123876-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1af7fef0d9 upstream.
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae0fa0a312 upstream.
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dc485f994 upstream.
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b0b698b80c ]
Had a duplicate event typo, so just fixed the 1 character typo.
Fixes: 1a218d312e ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: James Hurley <jahurley@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/aadacdbbd3186c55e74ea9456fe011b77938eb6c.1670535330.git.jahurley@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b3d0cb7c0 ]
In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().
Fixes: 54b34aa0a7 ("platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221208151916.2404977-1-yangyingliang@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 727cc0147f ]
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak.
Fixes: 99b38b4acc ("platform/x86: add MXM WMI driver.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221129011101.2042315-1-liaoyu15@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a8aadcf0b ]
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.
Fixes: f28adb41da ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66fe238a9b ]
Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220711072333.2064341-9-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9a8aadcf0b ("platform/chrome: cros_ec_typec: zero out stale pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2d966236 ]
The following WARNING message was given when rmmod cros_usbpd_notify:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
Modules linked in: cros_usbpd_notify(-)
CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
...
Call Trace:
<TASK>
cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
__x64_sys_delete_module+0x3c7/0x570
? __ia32_sys_delete_module+0x570/0x570
? lock_is_held_type+0xe3/0x140
? syscall_enter_from_user_mode+0x17/0x50
? rcu_read_lock_sched_held+0xa0/0xd0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f333fe9b1b7
The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.
Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed.
Fixes: ec2daf6e33 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20221117080823.77549-1-yuancan@huawei.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b9a1dcdb6 ]
Previously, `huawei_wmi_input_setup()` returned the result of
logical or-ing the return values of two functions that return negative
errno-style error codes and one that returns `acpi_status`. If this
returned value was non-zero, then it was propagated from the platform
driver's probe function. That function should return a negative
errno-style error code, so the result of the logical or that
`huawei_wmi_input_setup()` returned was not appropriate.
Fix that by checking each function separately and returning the
error code unmodified.
Fixes: 1ac9abeb2e ("platform/x86: huawei-wmi: Move to platform driver")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20221005150032.173198-2-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a5603a0f ]
Commit 3ae86d2d47 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.
Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b9b6a044b ]
Sometimes hp-wmi driver complains on system resume:
[ 483.116451] hp_wmi: Unknown event_id - 33 - 0x0
According to HP it's a feature called "HP Smart Experience App" and it's
safe to be ignored.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20221114073842.205392-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e817b889c ]
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models
the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE
through acer-wmi.
Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK
(these devices have no other acer-wmi based functionality).
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0cdd85046 ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before asus_wmi_set_xusb2pr() returns.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a977ece577 ]
Add INTC1076 (JasonLake), INTC1077 (MeteorLake) and INTC1078 (RaptorLake)
devices IDs.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20221102020548.5225-1-ivan.hu@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcdfa1f77e ]
On Sapphire Rapids, due to a hardware issue affecting the PUNIT telemetry
region, reads that are not done in QWORD quantities and alignment may
return incorrect data. Use a custom 64-bit copy for this region.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221105034228.1376677-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a231224a60 ]
Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Signed-off-by: Manyi Li <limanyi@uniontech.com>
Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a477f643 ]
Currently, we check any received packet whether we have already seen it
previously, regardless of the packet type (sequenced / unsequenced). We
do this by checking the sequence number. This assumes that sequence
numbers are valid for both sequenced and unsequenced packets. However,
this assumption appears to be incorrect.
On some devices, the sequence number field of unsequenced packets (in
particular HID input events on the Surface Pro 9) is always zero. As a
result, the current retransmission check kicks in and discards all but
the first unsequenced packet, breaking (among other things) keyboard and
touchpad input.
Note that we have, so far, only seen packets being retransmitted in
sequenced communication. In particular, this happens when there is an
ACK timeout, causing the EC (or us) to re-send the packet waiting for an
ACK. Arguably, retransmission / duplication of unsequenced packets
should not be an issue as there is no logical condition (such as an ACK
timeout) to determine when a packet should be sent again.
Therefore, remove the retransmission check for unsequenced packets
entirely to resolve the issue.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dbfb3f333 ]
The current logic in the Intel PMC driver will forcefully attach it
when detecting any CPU on the intel_pmc_core_platform_ids array,
even if the matching ACPI device is not present.
There's no checking in pmc_core_probe() to assert that the PMC device
is present, and hence on virtualized environments the PMC device
probes successfully, even if the underlying registers are not present.
Before commit 21ae435709 ("platform/x86: intel_pmc_core: Substitute PCI
with CPUID enumeration") the driver would check for the presence of a
specific PCI device, and that prevented the driver from attaching when
running virtualized.
Fix by only forcefully attaching the PMC device when not running
virtualized. Note that virtualized platforms can still get the device
to load if the appropriate ACPI device is present on the tables
provided to the VM.
Make an exception for the Xen initial domain, which does have full
hardware access, and hence can attach to the PMC if present.
Fixes: 21ae435709 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1598bfa8e1 upstream.
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded
strange char "^@" which printed out every second and makes login
nearly impossible. Also the below messages were shown both in console
and journal/dmesg every second:
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 4, error -71
usb 1-3: device descriptor read/all, error -71
usb usb1-port3: unable to enumerate USB device
Wifi is soft blocked by checking rfkill. When unblocked manually,
after few seconds it would be soft blocked again. So I was suspecting
something triggered rfkill to soft block wifi. At the end it was
fixed by removing hp_wmi module.
The root cause is the way hp-wmi driver handles command 1B on
post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate
that BIOS no longer controls the power for the wireless devices.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a2565272a ]
On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.
This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.
Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8edd2752b0 ]
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e477663e3 ]
Alt mode indices used by USB PD (Power Delivery) start with 1, not 0.
Update the alt mdoe registration code to factor this in to the alt mode
descriptor.
Fixes: de0f49487d ("platform/chrome: cros_ec_typec: Register partner altmodes")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220819190807.1275937-3-pmalani@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5523632aa1 ]
Fix the input-device not getting free-ed on probe-errors and
fix the msi_touchpad_dwork not getting cancelled on neither
probe-errors nor on remove.
Fixes: 143a4c0284 ("msi-laptop: send out touchpad on/off key")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83ac7a1c2e ]
Commit 2cc6c71779 ("msi-laptop: Port to new backlight interface
selection API") replaced this check:
if (!quirks->old_ec_model || acpi_video_backlight_support())
pr_info("Brightness ignored, ...");
else
do_register();
With:
if (quirks->old_ec_model ||
acpi_video_get_backlight_type() == acpi_backlight_vendor)
do_register();
But since the do_register() part was part of the else branch, the entire
condition should be inverted. So not only the 2 statements on either
side of the || should be inverted, but the || itself should be replaced
with a &&.
In practice this has likely not been an issue because the new-ec models
(old_ec_model==false) likely all support ACPI video backlight control,
making acpi_video_get_backlight_type() return acpi_backlight_video
turning the second part of the || also false when old_ec_model == false.
Fixes: 2cc6c71779 ("msi-laptop: Port to new backlight interface selection API")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a07b45fd3 ]
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.
Fixes: eda2e30c66 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad4194d6a ]
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8 ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f74c7557ed upstream.
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes: 3300fdd630 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3b82d26bc ]
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:
1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.
2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b8e40343 ]
The Surface Laptop Go 2 seems to have the same SAM client devices as the
Surface Laptop Go 1, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810140133.99087-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a90ed8d0c ]
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b36f0643ff ]
It wrongly showed the following message when it doesn't support MKBP:
"MKBP support version 4294967295".
Fix it.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-14-tzungbi@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ec787e1a ]
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498 ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74bb746407 ]
The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.
Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.
Cc: Rajat Jain <rajatja@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 7235560ac7 ("platform/chrome: Add support for v1 of host sleep event")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ab762a84b ]
After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0
According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9918878676 ]
The driver core sets struct device->driver before calling out
to the bus' probe() method, this leaves a window where an ACPI
notify may happen on the WMI object before the driver's
probe() method has completed running, causing e.g. the
driver's notify() callback to get called with drvdata
not yet being set leading to a NULL pointer deref.
At a check for this to the WMI core, ensuring that the notify()
callback is not called before the driver is ready.
Fixes: 1686f54445 ("platform/x86: wmi: Incorporate acpi_install_notify_handler")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a90b38c586 ]
Replace the wmi_block.read_takes_no_args bool field with
an unsigned long flags field, used together with test_bit()
and friends.
This is a preparation patch for fixing a driver->notify() vs ->probe()
race, which requires atomic flag handling.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7b2e33449 ]
Introduce a helper function which wraps the appropriate
`container_of()` macro invocation to convert
a `struct device_driver` to `struct wmi_driver`.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210904175450.156801-27-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aacb455dfe ]
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f2c9de83a ]
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83a5ddc3dc ]
In hindsight blindly throwing away most of the key-press events is not
a good idea. So revert commit ed83c91718 ("platform/x86:
panasonic-laptop: Resolve hotkey double trigger bug").
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4326c8d1 ]
Sort includes alphabetically, small cleanup patch in preparation of
further changes.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65a3e6c8d3 ]
In the definition of panasonic_keymap[] the key codes are given in
decimal, later checks are done with hexadecimal values, which does
not help in understanding the code.
Additionally use two helper variables to shorten the code and make
the logic more obvious.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4fe9cc4ff ]
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.
BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abae018a03 ]
Calling hwmon_device_register_with_info() with NULL dev and/or chip
information parameters is an ABI abuse and not a real conversion to
the new API. Also, the code creates sysfs attributes _after_ creating
the hwmon device, which is racy and unsupported to start with. On top
of that, the removal code tries to remove the name attribute which is
owned by the hwmon core.
Use hwmon_device_register_with_groups() to register the hwmon device
instead.
In the future, the hwmon subsystem will reject calls to
hwmon_device_register_with_info with NULL dev or chip/info parameters.
Without this patch, the hwmon device will fail to register.
Fixes: f59dc51191 ("MIPS: Loongson: Fix boot warning about hwmon_device_register()")
Cc: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shravan Kumar Ramani
Liming Sun
Armin Wolf
Shih-Yi Chen
Konstantin Shelekhin
Maxim Mikityanskiy
Hans de Goede
Andy Shevchenko
Barnabás Pőcze
Alexandru Sorodoc
Maximilian Luz
Julian Winkler
Steve Wahl
Srinivas Pandruvada
Dan Carpenter
Fae
Jorge Lopez
Daniel Houldsworth
Andrey Avdeev
Frank Crawford
Mark Pearson
Rajvi Jingar
Tzung-Bi Shih
Randy Dunlap
Arnd Bergmann
Mario Limonciello
Sanket Goswami
Kevin Kuriakose
Koba Ko
Michael Klein
James Hurley
Yang Yingliang
Yu Liao
Victor Ding
Prashant Malani
Yuan Can
Arnav Rawat
Kai-Heng Feng
Xiongfeng Wang
Ivan Hu
David E. Box
Manyi Li
Roger Pau Monné
Jameson Thies
Dan Carpenter
Rustam Subkhankulov
Patryk Duda
Stephen Boyd
Stefan Seyfried
Duke Lee
August Wikerfors
Piotr Chmura
Yupeng Li
Guenter Roeck