BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
to enable/disable certain components in order to save power.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <F.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 52a4adbaebcc ("ARM: bcm283x: Switch V3D over to using the
PM driver instead of firmware.") VC4 on BCM2835 requires the power driver.
Otherwise the driver won't probe and HDMI output stays black:
vc4_v3d 20c00000.v3d: ignoring dependency for device, assuming no driver
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This provides a free software alternative to raspberrypi-power.c's
firmware calls to manage power domains. It also exposes a reset line,
where previously the vc4 driver had to try to force power off the
domain in order to trigger a reset.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.
This requires quite a lot of code in order to deal with the different HW
blocks that need to be quiesced during suspend:
- DDR PHY SHIM
- DDR memory controller and sequencer
- control processor
The final steps of the suspend execute in an on-chip SRAM and there is a
little bit of assembly code in order to shut down the DDR PHY PLL and
then go into a wfi loop until a wake-up even occurs. Conversely the
resume part involves waiting for the DDR PHY PLL to come back up and
resume executions where we left.
For S3, because of our memory hashing (actual hashing code not included
for simplicity, and is bypassed) we need to relocate the writable
variables (stack) into SRAM shortly before suspending in order to leave
the DRAM untouched and create a reliable hash of its contents.
This code has been contributed by Brian Norris initially and has been
incrementally fixed and updated to support new chips by a lot of people.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Gareth Powell <gpowell@broadcom.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We enable the BRCMSTB SoC drivers not only for ARM, but also ARM64 and
BMIPS.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We get a harmless warning if the RASPBERRYPI_POWER driver is enabled without
CONFIG_OF during compile testing:
warning: RASPBERRYPI_POWER selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can
replace the 'select' with a dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eric Anholt <eric@anholt.net>
Unify the different Broadcom SoCs directory and have everybody live
under drivers/soc/bcm/*.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The firmware driver can be a loadable module, but the power domain
can only be built-in, so we get a build error in an allmodconfig
kernel:
:(.text+0x17e59c): undefined reference to `rpi_firmware_property'
:(.text+0x17e51c): undefined reference to `rpi_firmware_get'
:(.text+0x17e244): undefined reference to `rpi_firmware_property'
This changes the dependency to only allow the power domain code
to be enabled when the firmware driver is built-in. Other users
of the firmware driver may still be loadable modules and not
everyone needs the power domains, so we don't change the firmware
code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds support for several power domains on Raspberry Pi,
including USB (so it can be enabled even if the bootloader didn't do
it), and graphics.
This patch is the combined work of Eric Anholt (who wrote USB support
inside of the Raspberry Pi firmware driver, and wrote the non-USB
domain support) and Alexander Aring (who separated the original USB
work out from the firmware driver).
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Álvaro Fernández Rojas
Thomas Gleixner
Stefan Wahren
Eric Anholt
Brian Norris
Markus Mayer
Arnd Bergmann
Florian Fainelli
Alexander Aring