[ Upstream commit e74216b8de ]
The commit 14af9963ba ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0fdcdc3a ]
No caller since v3.16.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e74216b8de ("bonding: fix macvlan over alb bond support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9949e2efb5 ]
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3c
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.
ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000
To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5944b5abd8 ]
Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9949e2efb5 ("bonding: fix send_peer_notif overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ae9b15fbe6 upstream.
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1d9a143ee3 ]
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 86247aba59 ("net: bonding: Unsync device addresses on ndo_stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
All of the symbols either only exist in bond_options.c or nowhere at
all. These symbols were verified to not exist in the code base by
using `git grep` and their removal was verified by compiling bonding.ko.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2021-08-10
We've added 31 non-merge commits during the last 8 day(s) which contain
a total of 28 files changed, 3644 insertions(+), 519 deletions(-).
1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki.
2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from
32-bit MIPS JIT development, from Johan Almbladh.
3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev.
4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko.
5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang.
6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet.
7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover,
and Muhammad Falak R Wani.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
bpf, tests: Add tail call test suite
bpf, tests: Add tests for BPF_CMPXCHG
bpf, tests: Add tests for atomic operations
bpf, tests: Add test for 32-bit context pointer argument passing
bpf, tests: Add branch conversion JIT test
bpf, tests: Add word-order tests for load/store of double words
bpf, tests: Add tests for ALU operations implemented with function calls
bpf, tests: Add more ALU64 BPF_MUL tests
bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64
bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH
bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations
bpf, tests: Fix typos in test case descriptions
bpf, tests: Add BPF_MOV tests for zero and sign extension
bpf, tests: Add BPF_JMP32 test cases
samples, bpf: Add an explict comment to handle nested vlan tagging.
selftests/bpf: Add tests for XDP bonding
selftests/bpf: Fix xdp_tx.c prog section name
net, core: Allow netdev_lower_get_next_private_rcu in bh context
bpf, devmap: Exclude XDP broadcast to master device
net, bonding: Add XDP support to the bonding driver
...
====================
Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP is implemented in the bonding driver by transparently delegating
the XDP program loading, removal and xmit operations to the bonding
slave devices. The overall goal of this work is that XDP programs
can be attached to a bond device *without* any further changes (or
awareness) necessary to the program itself, meaning the same XDP
program can be attached to a native device but also a bonding device.
Semantics of XDP_TX when attached to a bond are equivalent in such
setting to the case when a tc/BPF program would be attached to the
bond, meaning transmitting the packet out of the bond itself using one
of the bond's configured xmit methods to select a slave device (rather
than XDP_TX on the slave itself). Handling of XDP_TX to transmit
using the configured bonding mechanism is therefore implemented by
rewriting the BPF program return value in bpf_prog_run_xdp. To avoid
performance impact this check is guarded by a static key, which is
incremented when a XDP program is loaded onto a bond device. This
approach was chosen to avoid changes to drivers implementing XDP. If
the slave device does not match the receive device, then XDP_REDIRECT
is transparently used to perform the redirection in order to have
the network driver release the packet from its RX ring. The bonding
driver hashing functions have been refactored to allow reuse with
xdp_buff's to avoid code duplication.
The motivation for this change is to enable use of bonding (and
802.3ad) in hairpinning L4 load-balancers such as [1] implemented with
XDP and also to transparently support bond devices for projects that
use XDP given most modern NICs have dual port adapters. An alternative
to this approach would be to implement 802.3ad in user-space and
implement the bonding load-balancing in the XDP program itself, but
is rather a cumbersome endeavor in terms of slave device management
(e.g. by watching netlink) and requires separate programs for native
vs bond cases for the orchestrator. A native in-kernel implementation
overcomes these issues and provides more flexibility.
Below are benchmark results done on two machines with 100Gbit
Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and
16-core 3950X on receiving machine. 64 byte packets were sent with
pktgen-dpdk at full rate. Two issues [2, 3] were identified with the
ice driver, so the tests were performed with iommu=off and patch [2]
applied. Additionally the bonding round robin algorithm was modified
to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate
of cache misses were caused by the shared rr_tx_counter (see patch
2/3). The statistics were collected using "sar -n dev -u 1 10". On top
of that, for ice, further work is in progress on improving the XDP_TX
numbers [4].
-----------------------| CPU |--| rxpck/s |--| txpck/s |----
without patch (1 dev):
XDP_DROP: 3.15% 48.6Mpps
XDP_TX: 3.12% 18.3Mpps 18.3Mpps
XDP_DROP (RSS): 9.47% 116.5Mpps
XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps
-----------------------
with patch, bond (1 dev):
XDP_DROP: 3.14% 46.7Mpps
XDP_TX: 3.15% 13.9Mpps 13.9Mpps
XDP_DROP (RSS): 10.33% 117.2Mpps
XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps
-----------------------
with patch, bond (2 devs):
XDP_DROP: 6.27% 92.7Mpps
XDP_TX: 6.26% 17.6Mpps 17.5Mpps
XDP_DROP (RSS): 11.38% 117.2Mpps
XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps
--------------------------------------------------------------
RSS: Receive Side Scaling, e.g. the packets were sent to a range of
destination IPs.
[1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb
[2]: https://lore.kernel.org/bpf/20210601113236.42651-1-maciej.fijalkowski@intel.com/T/#t
[3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/
[4]: https://lore.kernel.org/bpf/20210805230046.28715-1-maciej.fijalkowski@intel.com/T/#t
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210731055738.16820-4-joamaki@gmail.com
Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".
Note, the LACPDU state frames still will be sent when init or unbind port.
v2: remove module parameter
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bonding has been supporting ipsec offload.
When SA is added, bonding just passes SA to its own active real interface.
But it doesn't manage SA.
So, when events(add/del real interface, active real interface change, etc)
occur, bonding can't handle that well because It doesn't manage SA.
So some problems(panic, UAF, refcnt leak)occur.
In order to make it stable, it should manage SA.
That's the reason why struct bond_ipsec is added.
When a new SA is added to bonding interface, it is stored in the
bond_ipsec list. And the SA is passed to a current active real interface.
If events occur, it uses bond_ipsec data to handle these events.
bond->ipsec_list is protected by bond->ipsec_lock.
If a current active real interface is changed, the following logic works.
1. delete all SAs from old active real interface
2. Add all SAs to the new active real interface.
3. If a new active real interface doesn't support ipsec offload or SA's
option, it sets real_dev to NULL.
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The round-robin rr_tx_counter was shared across CPUs leading to
significant cache thrashing at high packet rates. This patch switches
the round-robin packet counter to use a per-cpu variable to decide
the destination slave.
On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh
(-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after
this patch.
"perf top -e cache_misses" before:
12.31% [bonding] [k] bond_xmit_roundrobin_slave_get
10.59% [sch_fq_codel] [k] fq_codel_dequeue
9.34% [kernel] [k] skb_release_data
after:
15.42% [sch_fq_codel] [k] fq_codel_dequeue
10.06% [kernel] [k] __memset
9.12% [kernel] [k] skb_release_data
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the description in previous patch (for TX):
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the offload status based on the logic under bond_sk_check().
Here we just declare RX device offload support, and expose it via the
NETIF_F_HW_TLS_RX flag.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement TLS TX device offload for bonding interfaces.
This allows kTLS sockets running on a bond to benefit from the
device offload on capable lower devices.
To allow a simple and fast maintenance of the TLS context in SW and
lower devices, we bind the TLS socket to a specific lower dev.
To achieve a behavior similar to SW kTLS, we support only balance-xor
and 802.3ad modes, with xmit_hash_policy=layer3+4. This is enforced
in bond_sk_check(), done in a previous patch.
For the above configuration, the SW implementation keeps picking the
same exact lower dev for all the socket's SKBs. The device offload
behaves similarly, making the decision once at the connection creation.
Per socket, the TLS module should work directly with the lowest netdev
in chain, to call the tls_dev_ops operations.
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the current offload status based on the logic under bond_sk_check().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ndo_sk_get_lower_dev() implementation for bond interfaces.
Support only for the cases where the socket's and SKBs' hash
yields identical value for the whole connection lifetime.
Here we restrict it to L3+4 sockets only, with
xmit_hash_policy==LAYER34 and bond modes xor/802.3ad.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.
Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:
esp-hw-offload: off [requested on]
I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.
Fixes: a3b658cfb6 ("bonding: allow xfrm offload setup post-module-load")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Suggested-by: Ivan Vecera <ivecera@redhat.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the moment, bonding xfrm crypto offload can only be set up if the bonding
module is loaded with active-backup mode already set. We need to be able to
make this work with bonds set to AB after the bonding driver has already
been loaded.
So what's done here is:
1) move #define BOND_XFRM_FEATURES to net/bonding.h so it can be used
by both bond_main.c and bond_options.c
2) set BOND_XFRM_FEATURES in bond_dev->hw_features universally, rather than
only when loading in AB mode
3) wire up xfrmdev_ops universally too
4) disable BOND_XFRM_FEATURES in bond_dev->features if not AB
5) exit early (non-AB case) from bond_ipsec_offload_ok, to prevent a
performance hit from traversing into the underlying drivers
5) toggle BOND_XFRM_FEATURES in bond_dev->wanted_features and call
netdev_change_features() from bond_option_mode_set()
In my local testing, I can change bonding modes back and forth on the fly,
have hardware offload work when I'm in AB, and see no performance penalty
to non-AB software encryption, despite having xfrm bits all wired up for
all modes now.
Fixes: 18cb261afd ("bonding: support hardware encryption offload to slaves")
Reported-by: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, this support is limited to active-backup mode, as I'm not sure
about the feasilibity of mapping an xfrm_state's offload handle to
multiple hardware devices simultaneously, and we rely on being able to
pass some hints to both the xfrm and NIC driver about whether or not
they're operating on a slave device.
I've tested this atop an Intel x520 device (ixgbe) using libreswan in
transport mode, succesfully achieving ~4.3Gbps throughput with netperf
(more or less identical to throughput on a bare NIC in this system),
as well as successful failover and recovery mid-netperf.
v2: just use CONFIG_XFRM_OFFLOAD for wrapping, isolate more code with it
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This merge includes updates to bonding driver needed for the rdma stack,
to avoid conflicts with the RDMA branch.
Maor Gottlieb Says:
====================
Bonding: Add support to get xmit slave
The following series adds support to get the LAG master xmit slave by
introducing new .ndo - ndo_get_xmit_slave. Every LAG module can
implement it and it first implemented in the bond driver.
This is follow-up to the RFC discussion [1].
The main motivation for doing this is for drivers that offload part
of the LAG functionality. For example, Mellanox Connect-X hardware
implements RoCE LAG which selects the TX affinity when the resources
are created and port is remapped when it goes down.
The first part of this patchset introduces the new .ndo and add the
support to the bonding module.
The second part adds support to get the RoCE LAG xmit slave by building
skb of the RoCE packet based on the AH attributes and call to the new
.ndo.
The third part change the mlx5 driver driver to set the QP's affinity
port according to the slave which found by the .ndo.
====================
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, bonding always returns NETDEV_TX_OK to its caller.
It is worth trying to be more accurate : TCP for instance
can have different recovery strategies if it can have more
precise status, if packet was dropped by slave qdisc.
This is especially important when host is under stress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
netpoll_send_skb() callers seem to leak skb if
the np pointer is NULL. While this should not happen, we
can make the code more robust.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit b3e80d44f5
("bonding: fix lockdep warning in bond_get_stats()") the dynamic
key is no longer necessary, as we compute nest level at run-time.
So, we can just remove it to save some lockdep key entries.
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ip link set bond0 master bond1
ip link set bond0 nomaster
ip link set bond1 master bond0
Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep all slaves in array so it could be used to get the xmit slave
assume all the slaves are active.
The logic to add slave to the array is like the usable slaves, except
that we also add slaves that currently can't transmit - not up or active.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Rename slave_arr to usable_slaves, since we will have two arrays,
one for the usable slaves and the other to all slaves.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since de77ecd4ef ("bonding: improve link-status update in
mii-monitoring"), the bonding driver has utilized two separate variables
to indicate the next link state a particular slave should transition to.
Each is used to communicate to a different portion of the link state
change commit logic; one to the bond_miimon_commit function itself, and
another to the state transition logic.
Unfortunately, the two variables can become unsynchronized,
resulting in incorrect link state transitions within bonding. This can
cause slaves to become stuck in an incorrect link state until a
subsequent carrier state transition.
The issue occurs when a special case in bond_slave_netdev_event
sets slave->link directly to BOND_LINK_FAIL. On the next pass through
bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
case will set the proposed next state (link_new_state) to BOND_LINK_UP,
but the new_link to BOND_LINK_DOWN. The setting of the final link state
from new_link comes after that from link_new_state, and so the slave
will end up incorrectly in _DOWN state.
Resolve this by combining the two variables into one.
Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Reported-by: Sha Zhang <zhangsha.zhang@huawei.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Fixes: de77ecd4ef ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes variables and callback these are related to the nested
device structure.
devices that can be nested have their own nest_level variable that
represents the depth of nested devices.
In the previous patch, new {lower/upper}_level variables are added and
they replace old private nest_level variable.
So, this patch removes all 'nest_level' variables.
In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added
to get lockdep subclass value, which is actually lower nested depth value.
But now, they use the dynamic lockdep key to avoid lockdep warning instead
of the subclass.
So, this patch removes ->ndo_get_lock_subclass() callback.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All bonding device has same lockdep key and subclass is initialized with
nest_level.
But actual nest_level value can be changed when a lower device is attached.
And at this moment, the subclass should be updated but it seems to be
unsafe.
So this patch makes bonding use dynamic lockdep key instead of the
subclass.
Test commands:
ip link add bond0 type bond
for i in {1..5}
do
let A=$i-1
ip link add bond$i type bond
ip link set bond$i master bond$A
done
ip link set bond5 master bond0
Splat looks like:
[ 307.992912] WARNING: possible recursive locking detected
[ 307.993656] 5.4.0-rc3+ #96 Tainted: G W
[ 307.994367] --------------------------------------------
[ 307.995092] ip/761 is trying to acquire lock:
[ 307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[ 307.997045]
but task is already holding lock:
[ 307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[ 307.999215]
other info that might help us debug this:
[ 308.000251] Possible unsafe locking scenario:
[ 308.001137] CPU0
[ 308.001533] ----
[ 308.001915] lock(&(&bond->stats_lock)->rlock#2/2);
[ 308.002609] lock(&(&bond->stats_lock)->rlock#2/2);
[ 308.003302]
*** DEADLOCK ***
[ 308.004310] May be due to missing lock nesting notation
[ 308.005319] 3 locks held by ip/761:
[ 308.005830] #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0
[ 308.006894] #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[ 308.008243] #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding]
[ 308.009422]
stack backtrace:
[ 308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G W 5.4.0-rc3+ #96
[ 308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 308.012179] Call Trace:
[ 308.012601] dump_stack+0x7c/0xbb
[ 308.013089] __lock_acquire+0x269d/0x3de0
[ 308.013669] ? register_lock_class+0x14d0/0x14d0
[ 308.014318] lock_acquire+0x164/0x3b0
[ 308.014858] ? bond_get_stats+0xb8/0x500 [bonding]
[ 308.015520] _raw_spin_lock_nested+0x2e/0x60
[ 308.016129] ? bond_get_stats+0xb8/0x500 [bonding]
[ 308.017215] bond_get_stats+0xb8/0x500 [bonding]
[ 308.018454] ? bond_arp_rcv+0xf10/0xf10 [bonding]
[ 308.019710] ? rcu_read_lock_held+0x90/0xa0
[ 308.020605] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 308.021286] ? bond_get_stats+0x9f/0x500 [bonding]
[ 308.021953] dev_get_stats+0x1ec/0x270
[ 308.022508] bond_get_stats+0x1d1/0x500 [bonding]
Fixes: d3fff6c443 ("net: add netdev_lockdep_set_classes() helper")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, gratuitous ARP/ND packets are sent every `miimon'
milliseconds. This commit allows a user to specify a custom delay
through a new option, `peer_notif_delay'.
Like for `updelay' and `downdelay', this delay should be a multiple of
`miimon' to avoid managing an additional work queue. The configuration
logic is copied from `updelay' and `downdelay'. However, the default
value cannot be set using a module parameter: Netlink or sysfs should
be used to configure this feature.
When setting `miimon' to 100 and `peer_notif_delay' to 500, we can
observe the 500 ms delay is respected:
20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
In bond_mii_monitor(), I have tried to keep the lock logic readable.
The change is due to the fact we cannot rely on a notification to
lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is
only triggered once every N times, while we need to decrement the
counter each time.
iproute2 also needs to be updated to be able to specify this new
attribute through `ip link'.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Where possible, we generally want both the bond master and the relevant slave
information in message output. Standardize the format using new slave_*
printk macros.
Suggested-by: Joe Perches <joe@perches.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LAG devices (team or bond) recognize for each one of their slave devices
whether LAG traffic is going to be sent through that device. Bond calls
such devices "active", team calls them "txable". When this state
changes, a NETDEV_CHANGELOWERSTATE notification is distributed, together
with a netdev_notifier_changelowerstate_info structure that for LAG
devices includes a tx_enabled flag that refers to the new state. The
notification thus makes it possible to react to the changes in txability
in drivers.
However there's no way to query txability from the outside on demand.
That is problematic namely for mlxsw, which when resolving ERSPAN packet
path, may encounter a LAG device, and needs to determine which of the
slaves it should choose.
To that end, introduce a new function, net_lag_port_dev_txable(), which
determines whether a given slave device is "active" or
"txable" (depending on the flavor of the LAG device). That function then
dispatches to per-LAG-flavor helpers, bond_is_active_slave_dev() resp.
team_port_dev_txable().
Because there currently is no good place where net_lag_port_dev_txable()
should be added, introduce a new header file, lag.h, which should from
now on hold any logic common to both team and bond. (But keep
netif_is_lag_master() together with the rest of netif_is_*_master()
functions).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rx load balancing provided by balance-alb is not mutually
exclusive with using hashing for tx selection, and should provide a decent
speed increase because this eliminates spinlocks and cache contention.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was a regression at some point from the intended functionality of
commit f60c3704e8 ("bonding: Fix alb mode to only use first level
vlans.")
Given the return value vlan_get_encap_level() we need to store the nest
level of the bond device, and then compare the vlan's encap level to
this. Without this, this check always fails and learning packets are
never sent.
In addition, this same commit caused a regression in the behavior of
balance_alb, which requires learning packets be sent for all interfaces
using the slave's mac in order to load balance properly. For vlan's
that have not set a user mac, we can send after checking one bit.
Otherwise we need send the set mac, albeit defeating rx load balancing
for that vlan.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the patch 'rtnetlink: bring NETDEV_CHANGELOWERSTATE event
process back to rtnetlink_event', bond_lower_state_changed would
generate NETDEV_CHANGEUPPER event which would send a notification
to userspace in rtnetlink_event.
There's no need to call rtmsg_ifinfo to send the notification
any more. So this patch is to remove it from these places after
bond_lower_state_changed.
Besides, after this, rtmsg_ifinfo is not needed to be exported.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack to do_set_master and down to ndo_add_slave
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch c4adfc822b ("bonding: make speed, duplex setting consistent
with link state") puts the link state to down if
bond_update_speed_duplex() cannot retrieve speed and duplex settings.
Assumably the patch was written with 802.3ad mode in mind which relies
on link speed/duplex settings. For other modes like active-backup these
settings are not required. Thus, only for these other modes, this patch
reintroduces support for slaves that do not support reporting speed or
duplex such as wireless devices. This fixes the regression reported in
bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547).
Fixes: c4adfc822b ("bonding: make speed, duplex setting consistent
with link state")
Signed-off-by: Andreas Born <futur.andy@googlemail.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Earlier patch 4493b81bea ("bonding: initialize work-queues during
creation of bond") moved the work-queue initialization from bond_open()
to bond_create(). However this caused the link those are created using
netlink 'create bond option' (ip link add bondX type bond); create the
new trunk without initializing work-queues. Prior to the above mentioned
change, ndo_open was in both paths and things worked correctly. The
consequence is visible in the report shared by Joe Stringer -
I've noticed that this patch breaks bonding within namespaces if
you're not careful to perform device cleanup correctly.
Here's my repro script, you can run on any net-next with this patch
and you'll start seeing some weird behaviour:
ip netns add foo
ip li add veth0 type veth peer name veth0+ netns foo
ip li add veth1 type veth peer name veth1+ netns foo
ip netns exec foo ip li add bond0 type bond
ip netns exec foo ip li set dev veth0+ master bond0
ip netns exec foo ip li set dev veth1+ master bond0
ip netns exec foo ip addr add dev bond0 192.168.0.1/24
ip netns exec foo ip li set dev bond0 up
ip li del dev veth0
ip li del dev veth1
The second to last command segfaults, last command hangs. rtnl is now
permanently locked. It's not a problem if you take bond0 down before
deleting veths, or delete bond0 before deleting veths. If you delete
either end of the veth pair as per above, either inside or outside the
namespace, it hits this problem.
Here's some kernel logs:
[ 1221.801610] bond0: Enslaving veth0+ as an active interface with an up link
[ 1224.449581] bond0: Enslaving veth1+ as an active interface with an up link
[ 1281.193863] bond0: Releasing backup interface veth0+
[ 1281.193866] bond0: the permanent HWaddr of veth0+ -
16:bf:fb:e0:b8:43 - is still in use by bond0 - set the HWaddr of
veth0+ to a different address to avoid conflicts
[ 1281.193867] ------------[ cut here ]------------
[ 1281.193873] WARNING: CPU: 0 PID: 2024 at kernel/workqueue.c:1511
__queue_delayed_work+0x13f/0x150
[ 1281.193873] Modules linked in: bonding veth openvswitch nf_nat_ipv6
nf_nat_ipv4 nf_nat autofs4 nfsd auth_rpcgss nfs_acl binfmt_misc nfs
lockd grace sunrpc fscache ppdev vmw_balloon coretemp psmouse
serio_raw vmwgfx ttm drm_kms_helper vmw_vmci netconsole parport_pc
configfs drm i2c_piix4 fb_sys_fops syscopyarea sysfillrect sysimgblt
shpchp mac_hid nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4
nf_defrag_ipv4 nf_conntrack libcrc32c lp parport hid_generic usbhid
hid mptspi mptscsih e1000 mptbase ahci libahci
[ 1281.193905] CPU: 0 PID: 2024 Comm: ip Tainted: G W
4.10.0-bisect-bond-v0.14 #37
[ 1281.193906] Hardware name: VMware, Inc. VMware Virtual
Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014
[ 1281.193906] Call Trace:
[ 1281.193912] dump_stack+0x63/0x89
[ 1281.193915] __warn+0xd1/0xf0
[ 1281.193917] warn_slowpath_null+0x1d/0x20
[ 1281.193918] __queue_delayed_work+0x13f/0x150
[ 1281.193920] queue_delayed_work_on+0x27/0x40
[ 1281.193929] bond_change_active_slave+0x25b/0x670 [bonding]
[ 1281.193932] ? synchronize_rcu_expedited+0x27/0x30
[ 1281.193935] __bond_release_one+0x489/0x510 [bonding]
[ 1281.193939] ? addrconf_notify+0x1b7/0xab0
[ 1281.193942] bond_netdev_event+0x2c5/0x2e0 [bonding]
[ 1281.193944] ? netconsole_netdev_event+0x124/0x190 [netconsole]
[ 1281.193947] notifier_call_chain+0x49/0x70
[ 1281.193948] raw_notifier_call_chain+0x16/0x20
[ 1281.193950] call_netdevice_notifiers_info+0x35/0x60
[ 1281.193951] rollback_registered_many+0x23b/0x3e0
[ 1281.193953] unregister_netdevice_many+0x24/0xd0
[ 1281.193955] rtnl_delete_link+0x3c/0x50
[ 1281.193956] rtnl_dellink+0x8d/0x1b0
[ 1281.193960] rtnetlink_rcv_msg+0x95/0x220
[ 1281.193962] ? __kmalloc_node_track_caller+0x35/0x280
[ 1281.193964] ? __netlink_lookup+0xf1/0x110
[ 1281.193966] ? rtnl_newlink+0x830/0x830
[ 1281.193967] netlink_rcv_skb+0xa7/0xc0
[ 1281.193969] rtnetlink_rcv+0x28/0x30
[ 1281.193970] netlink_unicast+0x15b/0x210
[ 1281.193971] netlink_sendmsg+0x319/0x390
[ 1281.193974] sock_sendmsg+0x38/0x50
[ 1281.193975] ___sys_sendmsg+0x25c/0x270
[ 1281.193978] ? mem_cgroup_commit_charge+0x76/0xf0
[ 1281.193981] ? page_add_new_anon_rmap+0x89/0xc0
[ 1281.193984] ? lru_cache_add_active_or_unevictable+0x35/0xb0
[ 1281.193985] ? __handle_mm_fault+0x4e9/0x1170
[ 1281.193987] __sys_sendmsg+0x45/0x80
[ 1281.193989] SyS_sendmsg+0x12/0x20
[ 1281.193991] do_syscall_64+0x6e/0x180
[ 1281.193993] entry_SYSCALL64_slow_path+0x25/0x25
[ 1281.193995] RIP: 0033:0x7f6ec122f5a0
[ 1281.193995] RSP: 002b:00007ffe69e89c48 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[ 1281.193997] RAX: ffffffffffffffda RBX: 00007ffe69e8dd60 RCX: 00007f6ec122f5a0
[ 1281.193997] RDX: 0000000000000000 RSI: 00007ffe69e89c90 RDI: 0000000000000003
[ 1281.193998] RBP: 00007ffe69e89c90 R08: 0000000000000000 R09: 0000000000000003
[ 1281.193999] R10: 00007ffe69e89a10 R11: 0000000000000246 R12: 0000000058f14b9f
[ 1281.193999] R13: 0000000000000000 R14: 00000000006473a0 R15: 00007ffe69e8e450
[ 1281.194001] ---[ end trace 713a77486cbfbfa3 ]---
Fixes: 4493b81bea ("bonding: initialize work-queues during creation of bond")
Reported-by: Joe Stringer <joe@ovn.org>
Tested-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
People are using bonding over Infiniband IPoIB connections, and who knows
what else. Infiniband has a hardware address length of 20 octets
(INFINIBAND_ALEN), and the network core defines a MAX_ADDR_LEN of 32.
Various places in the bonding code are currently hard-wired to 6 octets
(ETH_ALEN), such as the 3ad code, which I've left untouched here. Besides,
only alb is currently possible on Infiniband links right now anyway, due
to commit 1533e77315, so the alb code is where most of the changes are.
One major component of this change is the addition of a bond_hw_addr_copy
function that takes a length argument, instead of using ether_addr_copy
everywhere that hardware addresses need to be copied about. The other
major component of this change is converting the bonding code from using
struct sockaddr for address storage to struct sockaddr_storage, as the
former has an address storage space of only 14, while the latter is 128
minus a few, which is necessary to support bonding over device with up to
MAX_ADDR_LEN octet hardware addresses. Additionally, this probably fixes
up some memory corruption issues with the current code, where it's
possible to write an infiniband hardware address into a sockaddr declared
on the stack.
Lightly tested on a dual mlx4 IPoIB setup, which properly shows a 20-octet
hardware address now:
$ cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: fault-tolerance (active-backup) (fail_over_mac active)
Primary Slave: mlx4_ib0 (primary_reselect always)
Currently Active Slave: mlx4_ib0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 100
Down Delay (ms): 100
Slave Interface: mlx4_ib0
MII Status: up
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr:
80:00:02:08:fe:80:00:00:00:00:00:00:e4:1d:2d:03:00:1d:67:01
Slave queue ID: 0
Slave Interface: mlx4_ib1
MII Status: up
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr:
80:00:02:09:fe:80:00:00:00:00:00:01:e4:1d:2d:03:00:1d:67:02
Slave queue ID: 0
Also tested with a standard 1Gbps NIC bonding setup (with a mix of
e1000 and e1000e cards), running LNST's bonding tests.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the function into two (a) propose (b) commit phase without
changing the semantics for the original API.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make struct pernet_operations::id unsigned.
There are 2 reasons to do so:
1)
This field is really an index into an zero based array and
thus is unsigned entity. Using negative value is out-of-bound
access by definition.
2)
On x86_64 unsigned 32-bit data which are mixed with pointers
via array indexing or offsets added or subtracted to pointers
are preffered to signed 32-bit data.
"int" being used as an array index needs to be sign-extended
to 64-bit before being used.
void f(long *p, int i)
{
g(p[i]);
}
roughly translates to
movsx rsi, esi
mov rdi, [rsi+...]
call g
MOVSX is 3 byte instruction which isn't necessary if the variable is
unsigned because x86_64 is zero extending by default.
Now, there is net_generic() function which, you guessed it right, uses
"int" as an array index:
static inline void *net_generic(const struct net *net, int id)
{
...
ptr = ng->ptr[id - 1];
...
}
And this function is used a lot, so those sign extensions add up.
Patch snipes ~1730 bytes on allyesconfig kernel (without all junk
messing with code generation):
add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
Unfortunately some functions actually grow bigger.
This is a semmingly random artefact of code generation with register
allocator being used differently. gcc decides that some variable
needs to live in new r8+ registers and every access now requires REX
prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be
used which is longer than [r8]
However, overall balance is in negative direction:
add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730)
function old new delta
nfsd4_lock 3886 3959 +73
tipc_link_build_proto_msg 1096 1140 +44
mac80211_hwsim_new_radio 2776 2808 +32
tipc_mon_rcv 1032 1058 +26
svcauth_gss_legacy_init 1413 1429 +16
tipc_bcbase_select_primary 379 392 +13
nfsd4_exchange_id 1247 1260 +13
nfsd4_setclientid_confirm 782 793 +11
...
put_client_renew_locked 494 480 -14
ip_set_sockfn_get 730 716 -14
geneve_sock_add 829 813 -16
nfsd4_sequence_done 721 703 -18
nlmclnt_lookup_host 708 686 -22
nfsd4_lockt 1085 1063 -22
nfs_get_client 1077 1050 -27
tcf_bpf_init 1106 1076 -30
nfsd4_encode_fattr 5997 5930 -67
Total: Before=154856051, After=154854321, chg -0.00%
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only remaining users are issuing SIOCGMIIPHY and SIOCGMIIREG,
neither of which deals with userland pointers. Simply calling
->ndo_do_ioctl() is fine; no messing with set_fs() is needed.
It used to mess with SIOCETHTOOL, which would've needed set_fs(),
but that has been killed in "[NET] ethtool ops are the only way"
9 years ago...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ether_addr_equal_64bits() requires some care about its arguments,
namely that 8 bytes might be read, even if last 2 byte values are not
used.
KASan detected a violation with null_mac_addr and lacpdu_mcast_addr
in bond_3ad.c
Same problem with mac_bcast[] and mac_v6_allmcast[] in bond_alb.c :
Although the 8-byte alignment was there, KASan would detect out
of bound accesses.
Fixes: 815117adaf ("bonding: use ether_addr_equal_unaligned for bond addr compare")
Fixes: bb54e58929 ("bonding: Verify RX LACPDU has proper dest mac-addr")
Fixes: 885a136c52 ("bonding: use compare_ether_addr_64bits() in ALB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bond_get_stats() can be called from rtnetlink (with RTNL held)
or from /proc/net/dev seq handler (with RCU held)
The logic added in commit 5f0c5f73e5 ("bonding: make global bonding
stats more reliable") kind of assumed only one cpu could run there.
If multiple threads are reading /proc/net/dev, stats can be really
messed up after a while.
A second problem is that some fields are 32bit, so we need to properly
handle the wrap around problem.
Given that RTNL is not always held, we need to use
bond_for_each_slave_rcu().
Fixes: 5f0c5f73e5 ("bonding: make global bonding stats more reliable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let netdev notifier listeners know about link and slave state change.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to state notifications.
We allow caller to indicate if the notification should happen now or later,
depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify
function (similar to bond_slave_state_notify) which is later on called
with rtnl mutex and goes over slaves and executes delayed notification.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some consumers of the netdev events API would like to know who is the
active slave when a NETDEV_CHANGEUPPER or NETDEV_BONDING_FAILOVER
events occur. For example, when managing RoCE GIDs, GIDs based on the
bond's ips should only be set on the port which corresponds to active
slave netdevice.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The port key has three components - user-key, speed-part, and duplex-part.
The LSBit is for the duplex-part, next 5 bits are for the speed while the
remaining 10 bits are the user defined key bits. Get these 10 bits
from the user-space (through the SysFs interface) and use it to form the
admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If
it is not provided then use zero for the user-key-bits (default).
It can set using following example code -
# modprobe bonding mode=4
# usr_port_key=$(( RANDOM & 0x3FF ))
# echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
# echo +eth1 > /sys/class/net/bond0/bonding/slaves
...
# ip link set bond0 up
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
[jt: * fixed up style issues reported by checkpatch
* fixed up context from change in ad_actor_sys_prio patch]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In an AD system, the communication between actor and partner is the
business between these two entities. In the current setup anyone on the
same L2 can "guess" the LACPDU contents and then possibly send the
spoofed LACPDUs and trick the partner causing connectivity issues for
the AD system. This patch allows to use a random mac-address obscuring
it's identity making it harder for someone in the L2 is do the same thing.
This patch allows user-space to choose the mac-address for the AD-system.
This mac-address can not be NULL or a Multicast. If the mac-address is set
from user-space; kernel will honor it and will not overwrite it. In the
absence (value from user space); the logic will default to using the
masters' mac as the mac-address for the AD-system.
It can be set using example code below -
# modprobe bonding mode=4
# sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \
$(( (RANDOM & 0xFE) | 0x02 )) \
$(( RANDOM & 0xFF )) \
$(( RANDOM & 0xFF )) \
$(( RANDOM & 0xFF )) \
$(( RANDOM & 0xFF )) \
$(( RANDOM & 0xFF )))
# echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system
# echo +eth1 > /sys/class/net/bond0/bonding/slaves
...
# ip link set bond0 up
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
[jt: fixed up style issues reported by checkpatch]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu
Jakub Kicinski
Taehee Yoo
Benjamin Poirier
Jonathan Toppins
Jussi Maki
Tariq Toukan
Jarod Wilson
Jamie Iles
Saeed Mahameed
Eric Dumazet
Cong Wang
Maor Gottlieb
Gustavo A. R. Silva
Jay Vosburgh
Vincent Bernat
Mahesh Bandewar
Petr Machata
Debabrata Banerjee
Xin Long
David Ahern
Andreas Born
Alexey Dobriyan
Al Viro
Jiri Pirko
Matan Barak