Граф коммитов

27 Коммитов

Автор SHA1 Сообщение Дата
Thomas Gleixner d0608b5474 parisc: Fixup last users of irq_chip->typename
The typename member of struct irq_chip was kept for migration purposes
and is obsolete since more than 2 years. Fix up the leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-12-16 03:48:56 +00:00
Helge Deller 1e0deabd35 parisc: dino.c - check return value of pci_assign_resource()
Signed-off-by: Helge Deller <deller@gmx.de>
2009-08-02 15:17:37 +02:00
Thomas Gleixner dfe0756502 parisc: remove obsolete hw_interrupt_type
The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have
been kept around for migration reasons.  After more than two years it's
time to remove them finally.

This patch cleans up one of the remaining users.  When all such patches
hit mainline we can remove the defines and typedefs finally.

Impact: cleanup

Convert the last remaining users to struct irq_chip and remove the
define.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03 03:34:08 +00:00
Grant Grundler fed99b1e86 parisc: advertise PCI devs after "assign_resources"
Alex Chiang asked me why PARISC was calling pci_bus_add_devices()
and pci_bus_assign_resources() in the opposite order from everyone else.
No reason and I couldn't see any data dependency.
Patch below applies cleanly to 2.6.30-rc2.

Later, I suspected the code worked only because no drivers would be
loaded/ready until much later in the system initialization sequence.

Tested "LBA" code on J6000 (32-bit) and A500 (64-bit SMP) with 2.6.30-rc2.
Not tested with any Dino controllers.
Not tested with PCI-PCI Bridge (TBD).

Reported-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03 03:34:07 +00:00
Alexander Beregalov c18b460895 parisc: drivers: fix warnings
ccio-dma.c:456: warning: overflow in implicit constant conversion
ccio-dma.c:459: warning: overflow in implicit constant conversion
ccio-dma.c:1032: warning: unused variable 'j'
ccio-dma.c:1031: warning: unused variable 'max'
ccio-dma.c:1031: warning: unused variable 'min'
ccio-dma.c:1031: warning: unused variable 'avg'
ccio-dma.c:1403: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'
ccio-dma.c:1403: warning: format '%08lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'
ccio-dma.c:1554: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'
dino.c:822: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'
dino.c:822: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'
dino.c:902: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'
dino.c:902: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'
asp.c:84: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'
eisa.c:317: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'
eisa_enumerator.c:101: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t'
eisa_enumerator.c:101: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'
eisa_enumerator.c:191: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t'
eisa_enumerator.c:191: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02 00:40:41 +00:00
Kay Sievers d4995244bd parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13 01:20:38 -04:00
Grant Grundler 9785d646c1 parisc: fix wrong assumption about bus->self
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> posted a patch series
to linux-pci to fix a wrong assumption about pci_bus->self==NULL for
all PCI host bus controllers. While PARISC platforms to not behave
this way, I prefer to have the code consistent across architectures.
The following patch replaces pci_bus->self with pci_bus->parent when
used as a test to check for "root bus controller".

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13 01:19:12 -04:00
Linus Torvalds 29a41e9e02 Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: export length of os_hpmc vector
  parisc: fix kernel crash (protection id trap) when compiling ruby1.9
  parisc: Use DEFINE_SPINLOCK
  parisc: add uevent helper for parisc bus
  parisc: fix ipv6 checksum
  parisc: quiet palo not-found message from "which"
  parisc: Replace NR_CPUS in parisc code
  parisc: trivial fixes
  parisc: fix braino in commit adding __space_to_prot
  parisc: factor out sid to protid conversion
  parisc: use leX_to_cpu in place of __fswabX
  parisc: fix GFP_KERNEL use while atomic in unwinder
  parisc: remove dead BIO_VMERGE_BOUNDARY and BIO_VMERGE_MAX_SIZE definitions
  parisc: set_time() catch errors
  parisc: use the new byteorder headers
  parisc: drivers/parisc/: make code static
  parisc: lib/: make code static
2009-01-09 11:53:07 -08:00
Bjorn Helgaas f0e88af855 PCI: parisc: use generic pci_swizzle_interrupt_pin()
Use the generic pci_swizzle_interrupt_pin() instead of arch-specific code.

Acked-by: Kyle McMartin <kyle@infradead.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:55 -08:00
Adrian Bunk df8e5bc6b7 parisc: drivers/parisc/: make code static
Make the following needlessly global code static:

- asp.c: asp_init_chip()
- ccio-dma.c: ccio_io_pdir_entry()
- dino.c: struct dino_port_ops
- dino.c: struct dino_bios_ops
- hppb.c: struct hppb_card_head
- lasi.c: lasi_led_init()
- lasi.c: lasi_init_chip()
- lba_pci.c: struct lba_bios_ops
- sba_iommu.c: sba_io_pdir_entry()
- sba_iommu.c: sba_driver_callback()
- sba_iommu.c: sba_driver_callback()
- wax.c: wax_init_chip()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-01-05 18:15:24 +00:00
Yinghai Lu 08678b0841 generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.

Preallocate 32 irq_desc, and irq_desc() will try to get more.

( No change in functionality is expected anywhere, except the odd build
  failure where we missed a code site or where a crossing commit itroduces
  new irq_desc[] usage. )

v2: according to Eric, change get_irq_desc() to irq_desc()

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:29 +02:00
Harvey Harrison a8043ecb17 drivers/parisc: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-05-15 10:38:54 -04:00
James Bottomley c71c68a04b PCI: remove parisc consumer of the pci global_list
Remove the parisc usage of the global_list, as it's not needed anymore.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:01 -07:00
Matthew Wilcox be577a5220 Build fixes for struct pt_regs removal
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-06 20:47:23 -06:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Helge Deller 5076c15862 [PARISC] I/O-Space must be ioremap_nocache()'d
Addresses in F-space must be accessed uncached on most parisc machines.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30 17:48:42 +00:00
Helge Deller cb6fc18e9c [PARISC] Use kzalloc and other janitor-style cleanups
Helge,
  o Convert a bunch of kmalloc/memset uses to kzalloc.
  o pci.c: Add some __read_mostly annotations.
  o pci.c: Move constant pci_post_reset_delay to asm/pci.h
  o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG.
  o Add some consts to perf.c/perf_images.h

Matthew,
  o sticore.c: Add some consts to suppress compile warnings.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-22 20:26:31 -05:00
Matthew Wilcox f45adcf977 [PARISC] Fix Dino reporting on J2240
Fix Dino reporting on J2240. This particular machine thought it
had a Cujo. Also add J2240 Dino chip to the hp_hardware_list.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:53:14 -05:00
Helge Deller 4d64c9f58e [PARISC] Introduce DINO_LOCAL_IRQS and use it for gsc_find_local_irq
Fix dino by using DINO_LOCAL_IRQS as the limit for gsc_find_local_irq()
instead of the irq itself.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:51:39 -05:00
Helge Deller 04d35d7324 [PARISC] Fix Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop
Fix irq-off-by-one for Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop.
We just DECLARE_PCI_FIXUP_ENABLE as it is unlikely that this will be
found in any other parisc system.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:51:11 -05:00
Matthew Wilcox 92b919fe46 [PARISC] Update dino from parisc tree
Fix card-mode Dino crashes on 725 (and probably other Snake) systems.
Dino was coming up in fatal mode after a warm reboot.  Resetting Dino
brings it out of fatal mode, so do that if the status register indicates
we're in fatal mode.  Since this was never observed on any later systems,
I presume firmware does this for us on those.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Add debug statements in the cfg_read and cfg_write functions
Fix debug statements from the IRQ overhaul last winter
Rename dino_driver_callback() to dino_probe()

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:38:23 -04:00
Matthew Wilcox 53f01bba49 [PARISC] Convert parisc_device to use struct resource for hpa
Convert pa_dev->hpa from an unsigned long to a struct resource.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Fix up users of ->hpa to use ->hpa.start instead.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:36:40 -04:00
Matthew Wilcox bdad1f836a [PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver
names.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:36:23 -04:00
Rajesh Shah c431ada45d [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
devices attached to it that have not been configured by firmware.  In this
case, we need to configure the devices before starting them.  This patch
separates device start from device scan so that we can introduce the
configuration step in the middle.

I kept the existing semantics for pci_scan_bus() since there are a huge number
of callers to that function.

Also, I have no way of testing the changes I made to the parisc files, so this
needs review by those folks.  Sorry for the massive cross-post, this touches
files in many different places.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00