Граф коммитов

186 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds d4df33b0e9 Merge branch 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "One compiler fix, and a bug-fix in swiotlb_nr_tbl() and
  swiotlb_max_segment() to check also for no_iotlb_memory"

* 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: fix phys_addr_t overflow warning
  swiotlb: Return consistent SWIOTLB segments/nr_tbl
  swiotlb: Group identical cleanup in swiotlb_cleanup()
2019-07-18 11:48:05 -07:00
Christoph Hellwig a5008b59cd dma-direct: only limit the mapping size if swiotlb could be used
Don't just check for a swiotlb buffer, but also if buffering might
be required for this particular device.

Fixes: 133d624b1c ("dma: Introduce dma_max_mapping_size()")
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-07-17 08:25:45 +02:00
Tom Lendacky 9087c37584 dma-direct: Force unencrypted DMA under SME for certain DMA masks
If a device doesn't support DMA to a physical address that includes the
encryption bit (currently bit 47, so 48-bit DMA), then the DMA must
occur to unencrypted memory. SWIOTLB is used to satisfy that requirement
if an IOMMU is not active (enabled or configured in passthrough mode).

However, commit fafadcd165 ("swiotlb: don't dip into swiotlb pool for
coherent allocations") modified the coherent allocation support in
SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU
is not active, this resulted in dma_alloc_coherent() failing for devices
that didn't support DMA addresses that included the encryption bit.

Addressing this requires changes to the force_dma_unencrypted() function
in kernel/dma/direct.c. Since the function is now non-trivial and
SME/SEV specific, update the DMA direct support to add an arch override
for the force_dma_unencrypted() function. The arch override is selected
when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in
the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either
SEV is active or SME is active and the device does not support DMA to
physical addresses that include the encryption bit.

Fixes: fafadcd165 ("swiotlb: don't dip into swiotlb pool for coherent allocations")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[hch: moved the force_dma_unencrypted declaration to dma-mapping.h,
      fold the s390 fix from Halil Pasic]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-16 22:15:46 +02:00
Linus Torvalds 9e3a25dc99 dma-mapping updates for Linux 5.3
- move the USB special case that bounced DMA through a device
    bar into the USB code instead of handling it in the common
    DMA code (Laurentiu Tudor and Fredrik Noring)
  - don't dip into the global CMA pool for single page allocations
    (Nicolin Chen)
  - fix a crash when allocating memory for the atomic pool failed
    during boot (Florian Fainelli)
  - move support for MIPS-style uncached segments to the common
    code and use that for MIPS and nios2 (me)
  - make support for DMA_ATTR_NON_CONSISTENT and
    DMA_ATTR_NO_KERNEL_MAPPING generic (me)
  - convert nds32 to the generic remapping allocator (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl0nPqgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNj2hAAxIv2O3wv6V5xhzWwOVo8e/xW1ZLlGAF0/z92u0do
 32Tm8jkdAGjZDnyxam7qisMSIjCNykpauQzVVxyUNBRSsn1V5t7KSaH3/OXCOVcr
 x2VWBirxGO2BbRseaCBjIcA/2qna+VIDGFcNXCtf6rM00YUK6qaJzkMwBKQAeYcM
 uJMJkaf8qaW4hygLJP8axXiGFdIJyFNLAlJ+ok6kYsJHHJNceOp0bo3CDa2mJBK9
 IhraK2zVkyE5EQkQM5cE/Kw1ppPelUKUkHwjgM4wpz2b18WbLu11nKP0hmUcvKRQ
 heY8xWiKxN0QTgS03ou7EVylyrSAE4dIKgzuA4VO32QCGsWypcAg4iU6s5TX6p9g
 tZEW2ckE6wbmRdQPyKoDpZg299/eQjRHc4MAA1yinT8tFMokw2tk8Fq1FWyltwL1
 8EiP5oNs2qUNvNgqUresl6/f6YOacFi1Q6IhgBVj6d6lyhMhlsHfW4w1XA1siv/I
 6l4qJbLohYab6hY7i+mBOd8iG/KrAlr4P6admnv2jDchswbb5t2j+ABE9xv++PFi
 u1HFqMlxqdWQaXGca2UeCUxUjkwO9N+kHpP+VRz+6D2b64dtCWSu8CN23sYXm2tO
 ubWIlrQQZPhhMkoFg7XqKSTacd+ut+SXN9Nxsyv548ETV0l1xbiLRHIbhyoIESD5
 RAI=
 =01Fr
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - move the USB special case that bounced DMA through a device bar into
   the USB code instead of handling it in the common DMA code (Laurentiu
   Tudor and Fredrik Noring)

 - don't dip into the global CMA pool for single page allocations
   (Nicolin Chen)

 - fix a crash when allocating memory for the atomic pool failed during
   boot (Florian Fainelli)

 - move support for MIPS-style uncached segments to the common code and
   use that for MIPS and nios2 (me)

 - make support for DMA_ATTR_NON_CONSISTENT and
   DMA_ATTR_NO_KERNEL_MAPPING generic (me)

 - convert nds32 to the generic remapping allocator (me)

* tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits)
  dma-mapping: mark dma_alloc_need_uncached as __always_inline
  MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms
  usb: host: Fix excessive alignment restriction for local memory allocations
  lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators
  nios2: use the generic uncached segment support in dma-direct
  nds32: use the generic remapping allocator for coherent DMA allocations
  arc: use the generic remapping allocator for coherent DMA allocations
  dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code
  dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code
  dma-mapping: add a dma_alloc_need_uncached helper
  openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support
  arc: remove the partial DMA_ATTR_NON_CONSISTENT support
  arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support
  ARM: dma-mapping: allow larger DMA mask than supported
  dma-mapping: truncate dma masks to what dma_addr_t can hold
  iommu/dma: Apply dma_{alloc,free}_contiguous functions
  dma-remap: Avoid de-referencing NULL atomic_pool
  MIPS: use the generic uncached segment support in dma-direct
  dma-direct: provide generic support for uncached kernel segments
  au1100fb: fix DMA API abuse
  ...
2019-07-12 15:13:55 -07:00
Linus Torvalds f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Greg Kroah-Hartman 1be51474f9 swiotlb: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612144314.GA16803@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 16:57:18 +02:00
Christoph Hellwig d98849aff8 dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code
DMA_ATTR_NO_KERNEL_MAPPING is generally implemented by allocating
normal cacheable pages or CMA memory, and then returning the page
pointer as the opaque handle.  Lift that code from the xtensa and
generic dma remapping implementations into the generic dma-direct
code so that we don't even call arch_dma_alloc for these allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 14:28:05 +02:00
Christoph Hellwig c2f2124e0d dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code
Only call into arch_dma_alloc if we require an uncached mapping,
and remove the parisc code manually doing normal cached
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
2019-06-25 14:27:58 +02:00
Christoph Hellwig 4b85faed21 dma-mapping: add a dma_alloc_need_uncached helper
Check if we need to allocate uncached memory for a device given the
allocation flags.  Switch over the uncached segment check to this helper
to deal with architectures that do not support the dma_cache_sync
operation and thus should not returned cacheable memory for
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 08:14:43 +02:00
Christoph Hellwig 4a54d16f61 dma-mapping: truncate dma masks to what dma_addr_t can hold
The dma masks in struct device are always 64-bits wide.  But for builds
using a 32-bit dma_addr_t we need to ensure we don't store an
unsupportable value.  Before Linux 5.0 this was handled at least by
the ARM dma mapping code by never allowing to set a larger dma_mask,
but these days we allow the driver to just set the largest supported
value and never fall back to a smaller one.  Ensure this always works
by truncating the value.

Fixes: 9eb9e96e97 ("Documentation/DMA-API-HOWTO: update dma_mask sections")
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 07:54:06 +02:00
Konrad Rzeszutek Wilk 8492101e15 Merge branch 'stable/for-linus-5.2' into devel/for-linus-5.2
* stable/for-linus-5.2:
  swiotlb: fix phys_addr_t overflow warning
2019-06-19 10:29:24 -04:00
Arnd Bergmann 9c106119f6 swiotlb: fix phys_addr_t overflow warning
On architectures that have a larger dma_addr_t than phys_addr_t,
the swiotlb_tbl_map_single() function truncates its return code
in the failure path, making it impossible to identify the error
later, as we compare to the original value:

kernel/dma/swiotlb.c:551:9: error: implicit conversion from 'dma_addr_t' (aka 'unsigned long long') to 'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
        return DMA_MAPPING_ERROR;

Use an explicit typecast here to convert it to the narrower type,
and use the same expression in the error handling later.

Fixes: b907e20508 ("swiotlb: remove SWIOTLB_MAP_ERROR")
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-06-19 10:28:54 -04:00
Florian Fainelli 4b4b077cbd dma-remap: Avoid de-referencing NULL atomic_pool
With architectures allowing the kernel to be placed almost arbitrarily
in memory (e.g.: ARM64), it is possible to have the kernel resides at
physical addresses above 4GB, resulting in neither the default CMA area,
nor the atomic pool from successfully allocating. This does not prevent
specific peripherals from working though, one example is XHCI, which
still operates correctly.

Trouble comes when the XHCI driver gets suspended and resumed, since we
can now trigger the following NPD:

[   12.664170] usb usb1: root hub lost power or was reset
[   12.669387] usb usb2: root hub lost power or was reset
[   12.674662] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[   12.682896] pgd = ffffffc1365a7000
[   12.686386] [00000008] *pgd=0000000136500003, *pud=0000000136500003, *pmd=0000000000000000
[   12.694897] Internal error: Oops: 96000006 [#1] SMP
[   12.699843] Modules linked in:
[   12.702980] CPU: 0 PID: 1499 Comm: pml Not tainted 4.9.135-1.13pre #51
[   12.709577] Hardware name: BCM97268DV (DT)
[   12.713736] task: ffffffc136bb6540 task.stack: ffffffc1366cc000
[   12.719740] PC is at addr_in_gen_pool+0x4/0x48
[   12.724253] LR is at __dma_free+0x64/0xbc
[   12.728325] pc : [<ffffff80083c0df8>] lr : [<ffffff80080979e0>] pstate: 60000145
[   12.735825] sp : ffffffc1366cf990
[   12.739196] x29: ffffffc1366cf990 x28: ffffffc1366cc000
[   12.744608] x27: 0000000000000000 x26: ffffffc13a8568c8
[   12.750020] x25: 0000000000000000 x24: ffffff80098f9000
[   12.755433] x23: 000000013a5ff000 x22: ffffff8009c57000
[   12.760844] x21: ffffffc13a856810 x20: 0000000000000000
[   12.766255] x19: 0000000000001000 x18: 000000000000000a
[   12.771667] x17: 0000007f917553e0 x16: 0000000000001002
[   12.777078] x15: 00000000000a36cb x14: ffffff80898feb77
[   12.782490] x13: ffffffffffffffff x12: 0000000000000030
[   12.787899] x11: 00000000fffffffe x10: ffffff80098feb7f
[   12.793311] x9 : 0000000005f5e0ff x8 : 65776f702074736f
[   12.798723] x7 : 6c2062756820746f x6 : ffffff80098febb1
[   12.804134] x5 : ffffff800809797c x4 : 0000000000000000
[   12.809545] x3 : 000000013a5ff000 x2 : 0000000000000fff
[   12.814955] x1 : ffffff8009c57000 x0 : 0000000000000000
[   12.820363]
[   12.821907] Process pml (pid: 1499, stack limit = 0xffffffc1366cc020)
[   12.828421] Stack: (0xffffffc1366cf990 to 0xffffffc1366d0000)
[   12.834240] f980:                                   ffffffc1366cf9e0 ffffff80086004d0
[   12.842186] f9a0: ffffffc13ab08238 0000000000000010 ffffff80097c2218 ffffffc13a856810
[   12.850131] f9c0: ffffff8009c57000 000000013a5ff000 0000000000000008 000000013a5ff000
[   12.858076] f9e0: ffffffc1366cfa50 ffffff80085f9250 ffffffc13ab08238 0000000000000004
[   12.866021] fa00: ffffffc13ab08000 ffffff80097b6000 ffffffc13ab08130 0000000000000001
[   12.873966] fa20: 0000000000000008 ffffffc13a8568c8 0000000000000000 ffffffc1366cc000
[   12.881911] fa40: ffffffc13ab08130 0000000000000001 ffffffc1366cfa90 ffffff80085e3de8
[   12.889856] fa60: ffffffc13ab08238 0000000000000000 ffffffc136b75b00 0000000000000000
[   12.897801] fa80: 0000000000000010 ffffff80089ccb92 ffffffc1366cfac0 ffffff80084ad040
[   12.905746] faa0: ffffffc13a856810 0000000000000000 ffffff80084ad004 ffffff80084b91a8
[   12.913691] fac0: ffffffc1366cfae0 ffffff80084b91b4 ffffffc13a856810 ffffff80080db5cc
[   12.921636] fae0: ffffffc1366cfb20 ffffff80084b96bc ffffffc13a856810 0000000000000010
[   12.929581] fb00: ffffffc13a856870 0000000000000000 ffffffc13a856810 ffffff800984d2b8
[   12.937526] fb20: ffffffc1366cfb50 ffffff80084baa70 ffffff8009932ad0 ffffff800984d260
[   12.945471] fb40: 0000000000000010 00000002eff0a065 ffffffc1366cfbb0 ffffff80084bafbc
[   12.953415] fb60: 0000000000000010 0000000000000003 ffffff80098fe000 0000000000000000
[   12.961360] fb80: ffffff80097b6000 ffffff80097b6dc8 ffffff80098c12b8 ffffff80098c12f8
[   12.969306] fba0: ffffff8008842000 ffffff80097b6dc8 ffffffc1366cfbd0 ffffff80080e0d88
[   12.977251] fbc0: 00000000fffffffb ffffff80080e10bc ffffffc1366cfc60 ffffff80080e16a8
[   12.985196] fbe0: 0000000000000000 0000000000000003 ffffff80097b6000 ffffff80098fe9f0
[   12.993140] fc00: ffffff80097d4000 ffffff8008983802 0000000000000123 0000000000000040
[   13.001085] fc20: ffffff8008842000 ffffffc1366cc000 ffffff80089803c2 00000000ffffffff
[   13.009029] fc40: 0000000000000000 0000000000000000 ffffffc1366cfc60 0000000000040987
[   13.016974] fc60: ffffffc1366cfcc0 ffffff80080dfd08 0000000000000003 0000000000000004
[   13.024919] fc80: 0000000000000003 ffffff80098fea08 ffffffc136577ec0 ffffff80089803c2
[   13.032864] fca0: 0000000000000123 0000000000000001 0000000500000002 0000000000040987
[   13.040809] fcc0: ffffffc1366cfd00 ffffff80083a89d4 0000000000000004 ffffffc136577ec0
[   13.048754] fce0: ffffffc136610cc0 ffffffffffffffea ffffffc1366cfeb0 ffffffc136610cd8
[   13.056700] fd00: ffffffc1366cfd10 ffffff800822a614 ffffffc1366cfd40 ffffff80082295d4
[   13.064645] fd20: 0000000000000004 ffffffc136577ec0 ffffffc136610cc0 0000000021670570
[   13.072590] fd40: ffffffc1366cfd80 ffffff80081b5d10 ffffff80097b6000 ffffffc13aae4200
[   13.080536] fd60: ffffffc1366cfeb0 0000000000000004 0000000021670570 0000000000000004
[   13.088481] fd80: ffffffc1366cfe30 ffffff80081b6b20 ffffffc13aae4200 0000000000000000
[   13.096427] fda0: 0000000000000004 0000000021670570 ffffffc1366cfeb0 ffffffc13a838200
[   13.104371] fdc0: 0000000000000000 000000000000000a ffffff80097b6000 0000000000040987
[   13.112316] fde0: ffffffc1366cfe20 ffffff80081b3af0 ffffffc13a838200 0000000000000000
[   13.120261] fe00: ffffffc1366cfe30 ffffff80081b6b0c ffffffc13aae4200 0000000000000000
[   13.128206] fe20: 0000000000000004 0000000000040987 ffffffc1366cfe70 ffffff80081b7dd8
[   13.136151] fe40: ffffff80097b6000 ffffffc13aae4200 ffffffc13aae4200 fffffffffffffff7
[   13.144096] fe60: 0000000021670570 ffffffc13a8c63c0 0000000000000000 ffffff8008083180
[   13.152042] fe80: ffffffffffffff1d 0000000021670570 ffffffffffffffff 0000007f917ad9b8
[   13.159986] fea0: 0000000020000000 0000000000000015 0000000000000000 0000000000040987
[   13.167930] fec0: 0000000000000001 0000000021670570 0000000000000004 0000000000000000
[   13.175874] fee0: 0000000000000888 0000440110000000 000000000000006d 0000000000000003
[   13.183819] ff00: 0000000000000040 ffffff80ffffffc8 0000000000000000 0000000000000020
[   13.191762] ff20: 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   13.199707] ff40: 0000000000000000 0000007f917553e0 0000000000000000 0000000000000004
[   13.207651] ff60: 0000000021670570 0000007f91835480 0000000000000004 0000007f91831638
[   13.215595] ff80: 0000000000000004 00000000004b0de0 00000000004b0000 0000000000000000
[   13.223539] ffa0: 0000000000000000 0000007fc92ac8c0 0000007f9175d178 0000007fc92ac8c0
[   13.231483] ffc0: 0000007f917ad9b8 0000000020000000 0000000000000001 0000000000000040
[   13.239427] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   13.247360] Call trace:
[   13.249866] Exception stack(0xffffffc1366cf7a0 to 0xffffffc1366cf8d0)
[   13.256386] f7a0: 0000000000001000 0000007fffffffff ffffffc1366cf990 ffffff80083c0df8
[   13.264331] f7c0: 0000000060000145 ffffff80089b5001 ffffffc13ab08130 0000000000000001
[   13.272275] f7e0: 0000000000000008 ffffffc13a8568c8 0000000000000000 0000000000000000
[   13.280220] f800: ffffffc1366cf960 ffffffc1366cf960 ffffffc1366cf930 00000000ffffffd8
[   13.288165] f820: ffffff8009931ac0 4554535953425553 4544006273753d4d 3831633d45434956
[   13.296110] f840: ffff003832313a39 ffffff800845926c ffffffc1366cf880 0000000000040987
[   13.304054] f860: 0000000000000000 ffffff8009c57000 0000000000000fff 000000013a5ff000
[   13.311999] f880: 0000000000000000 ffffff800809797c ffffff80098febb1 6c2062756820746f
[   13.319944] f8a0: 65776f702074736f 0000000005f5e0ff ffffff80098feb7f 00000000fffffffe
[   13.327884] f8c0: 0000000000000030 ffffffffffffffff
[   13.332835] [<ffffff80083c0df8>] addr_in_gen_pool+0x4/0x48
[   13.338398] [<ffffff80086004d0>] xhci_mem_cleanup+0xc8/0x51c
[   13.344137] [<ffffff80085f9250>] xhci_resume+0x308/0x65c
[   13.349524] [<ffffff80085e3de8>] xhci_brcm_resume+0x84/0x8c
[   13.355174] [<ffffff80084ad040>] platform_pm_resume+0x3c/0x64
[   13.360997] [<ffffff80084b91b4>] dpm_run_callback+0x5c/0x15c
[   13.366732] [<ffffff80084b96bc>] device_resume+0xc0/0x190
[   13.372205] [<ffffff80084baa70>] dpm_resume+0x144/0x2cc
[   13.377504] [<ffffff80084bafbc>] dpm_resume_end+0x20/0x34
[   13.382980] [<ffffff80080e0d88>] suspend_devices_and_enter+0x104/0x704
[   13.389585] [<ffffff80080e16a8>] pm_suspend+0x320/0x53c
[   13.394881] [<ffffff80080dfd08>] state_store+0xbc/0xe0
[   13.400094] [<ffffff80083a89d4>] kobj_attr_store+0x14/0x24
[   13.405655] [<ffffff800822a614>] sysfs_kf_write+0x60/0x70
[   13.411128] [<ffffff80082295d4>] kernfs_fop_write+0x130/0x194
[   13.416954] [<ffffff80081b5d10>] __vfs_write+0x60/0x150
[   13.422254] [<ffffff80081b6b20>] vfs_write+0xc8/0x164
[   13.427376] [<ffffff80081b7dd8>] SyS_write+0x70/0xc8
[   13.432412] [<ffffff8008083180>] el0_svc_naked+0x34/0x38
[   13.437800] Code: 92800173 97f6fb9e 17fffff5 d1000442 (f8408c03)
[   13.444033] ---[ end trace 2effe12f909ce205 ]---

The call path leading to this problem is xhci_mem_cleanup() ->
dma_free_coherent() -> dma_free_from_pool() -> addr_in_gen_pool. If the
atomic_pool is NULL, we can't possibly have the address in the atomic
pool anyway, so guard against that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-14 14:30:21 +02:00
Florian Fainelli 4aa095ea32 swiotlb: Return consistent SWIOTLB segments/nr_tbl
With a specifically contrived memory layout where there is no physical
memory available to the kernel below the 4GB boundary, we will fail to
perform the initial swiotlb_init() call and set no_iotlb_memory to true.

There are drivers out there that call into swiotlb_nr_tbl() to determine
whether they can use the SWIOTLB. With the right DMA_BIT_MASK() value
for these drivers (say 64-bit), they won't ever need to hit
swiotlb_tbl_map_single() so this can go unoticed and we would be
possibly lying about those drivers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-06-11 14:36:33 -04:00
Florian Fainelli 0bfaffbf4c swiotlb: Group identical cleanup in swiotlb_cleanup()
Avoid repeating the zeroing of global swiotlb variables in two locations
and introduce swiotlb_cleanup() to do that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-06-11 14:36:33 -04:00
Thomas Gleixner 4505153954 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 136 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:06 +02:00
Christoph Hellwig c30700db9e dma-direct: provide generic support for uncached kernel segments
A few architectures support uncached kernel segments.  In that case we get
an uncached mapping for a given physica address by using an offset in the
uncached segement.  Implement support for this scheme in the generic
dma-direct code instead of duplicating it in arch hooks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-03 16:00:08 +02:00
Nicolin Chen bd2e75633c dma-contiguous: use fallback alloc_pages for single pages
The addresses within a single page are always contiguous, so it's
not so necessary to always allocate one single page from CMA area.
Since the CMA area has a limited predefined size of space, it may
run out of space in heavy use cases, where there might be quite a
lot CMA pages being allocated for single pages.

However, there is also a concern that a device might care where a
page comes from -- it might expect the page from CMA area and act
differently if the page doesn't.

This patch tries to use the fallback alloc_pages path, instead of
one-page size allocations from the global CMA area in case that a
device does not have its own CMA area. This'd save resources from
the CMA global area for more CMA allocations, and also reduce CMA
fragmentations resulted from trivial allocations.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-03 16:00:07 +02:00
Nicolin Chen b1d2dc009d dma-contiguous: add dma_{alloc,free}_contiguous() helpers
Both dma_alloc_from_contiguous() and dma_release_from_contiguous() are
very simply implemented, but requiring callers to pass certain
parameters like count and align, and taking a boolean parameter to check
__GFP_NOWARN in the allocation flags. So every function call duplicates
similar work:

	unsigned long order = get_order(size);
	size_t count = size >> PAGE_SHIFT;

	page = dma_alloc_from_contiguous(dev, count, order,
			gfp & __GFP_NOWARN);

	[...]

	dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT);

Additionally, as CMA can be used only in the context which permits
sleeping, most of callers do a gfpflags_allow_blocking() check and a
corresponding fallback allocation of normal pages upon any false result:

	if (gfpflags_allow_blocking(flag))
		page = dma_alloc_from_contiguous();
	if (!page)
		page = alloc_pages();

	[...]

	if (!dma_release_from_contiguous(dev, page, count))
		__free_pages(page, get_order(size));

So this patch simplifies those function calls by abstracting these
operations into the two new functions: dma_{alloc,free}_contiguous.

As some callers of dma_{alloc,release}_from_contiguous() might be
complicated, this patch just implements these two new functions to
kernel/dma/direct.c only as an initial step.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-03 16:00:07 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Linus Torvalds ddab5337b2 DMA mapping updates for 5.2
- remove the already broken support for NULL dev arguments to the
    DMA API calls
  - Kconfig tidyups
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlzT00YLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYO66hAAx2kCUIh+K2gFB5uxHqZiG62UmRjkPzolxcR5/Jx9
 4Rz6NRAE+rp8v2fbBr2bveDx7cF5bm1L+pRyRsFMfwkm3a8dCHQ51ldIm5VFoI3e
 NiX6Zoxk02BCXP/Qk//aHeNW9dBmuiemiXzdPEhOvWvVzqTO5JZrECQpkHEkG+8A
 R/IWU15sr5xzw9Td/HVN9CRJri/qiTAuB9nSoP6BGjZeHkQjREJKNMGKDTvSzH4L
 tlyD1G7yEymQvLBqGGO64ztuav00l8sqjI3tn1mmwpw4VTajabeRHPnWh+7g9Od+
 sH1pRvIOTvEMc456fizufYIOedB5Ze344kgfrxhngRbBVXmMfShr8ZLzdIUGhGjY
 1cdGqIUOEKywiDf13KrHVkNU+lJtvjMCMxvV93mAYRLOIQg0Jf4T2kklgKyEhqrG
 rqFdbbtSBzmLjPyqc1FS0heDWmA+yJsKAumGcH4blJXCpsD1rHWGe0AJ34x+OHPT
 tw5l+P4zAH1eO1qHCtmxN9s0lXZv1VLcFkOrJH91LPvAhZsUCrdqDjyJpTUYaIao
 yzkiLbDwFO7SVoqzaVNlVZIJ/9LX0qfAnl2Atty+sAQomrQMoviNSzGbLSLQqhHN
 FbTIEBMxrxS49+3lfzHOS/lYPpJp6B31yotNM+6YpXmbRQZN5gjGNYBqhKD+7Rgn
 L0Y=
 =IdsP
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:

 - remove the already broken support for NULL dev arguments to the DMA
   API calls

 - Kconfig tidyups

* tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence
  dma-mapping: remove an unnecessary NULL check
  x86/dma: Remove the x86_dma_fallback_dev hack
  dma-mapping: remove leftover NULL device support
  arm: use a dummy struct device for ISA DMA use of the DMA API
  pxa3xx-gcu: pass struct device to dma_mmap_coherent
  gbefb: switch to managed version of the DMA allocator
  da8xx-fb: pass struct device to DMA API functions
  parport_ip32: pass struct device to DMA API functions
  dma: select GENERIC_ALLOCATOR for DMA_REMAP
2019-05-09 08:40:55 -07:00
Linus Torvalds 498e8631f2 Merge branch 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Cleanups in the swiotlb code and extra debugfs knobs to help with the
  field diagnostics"

* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb-xen: ensure we have a single callsite for xen_dma_map_page
  swiotlb-xen: simplify the DMA sync method implementations
  swiotlb-xen: use ->map_page to implement ->map_sg
  swiotlb-xen: make instances match their method names
  swiotlb: save io_tlb_used to local variable before leaving critical section
  swiotlb: dump used and total slots when swiotlb buffer is full
2019-05-07 18:45:27 -07:00
Christoph Hellwig 13bf5ced93 dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence
Add a Kconfig symbol that indicates an architecture provides a
arch_dma_prep_coherent implementation, and provide a stub otherwise.

This will allow the generic dma-iommu code to use it while still
allowing to be built for cache coherent architectures.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2019-05-06 15:04:40 +02:00
Thomas Gleixner 746017ed8d dma/debug: Simplify stracktrace retrieval
Replace the indirection through struct stack_trace with an invocation of
the storage array based interface.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: linux-btrfs@vger.kernel.org
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-arch@vger.kernel.org
Link: https://lkml.kernel.org/r/20190425094802.248658135@linutronix.de
2019-04-29 12:37:50 +02:00
Dan Carpenter 148a97d5a0 dma-mapping: remove an unnecessary NULL check
We already dereferenced "dev" when we called get_dma_ops() so this NULL
check is too late.  We're not supposed to pass NULL "dev" pointers to
dma_alloc_attrs().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-24 16:28:13 +02:00
Dongli Zhang 53b29c3368 swiotlb: save io_tlb_used to local variable before leaving critical section
When swiotlb is full, the kernel would print io_tlb_used. However, the
result might be inaccurate at that time because we have left the critical
section protected by spinlock.

Therefore, we backup the io_tlb_used into local variable before leaving
critical section.

Fixes: 83ca259489 ("swiotlb: dump used and total slots when swiotlb buffer is full")
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-04-12 19:44:46 -04:00
Scott Wood 8c5165430c dma-debug: only skip one stackframe entry
With skip set to 1, I get a traceback like this:

[  106.867637] DMA-API: Mapped at:
[  106.870784]  afu_dma_map_region+0x2cd/0x4f0 [dfl_afu]
[  106.875839]  afu_ioctl+0x258/0x380 [dfl_afu]
[  106.880108]  do_vfs_ioctl+0xa9/0x720
[  106.883688]  ksys_ioctl+0x60/0x90
[  106.887007]  __x64_sys_ioctl+0x16/0x20

With the previous value of 2, afu_dma_map_region was being omitted.  I
suspect that the code paths have simply changed since the value of 2 was
chosen a decade ago, but it's also possible that it varies based on which
mapping function was used, compiler inlining choices, etc.  In any case,
it's best to err on the side of skipping less.

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-11 19:29:50 +02:00
Dongli Zhang 83ca259489 swiotlb: dump used and total slots when swiotlb buffer is full
So far the kernel only prints the requested size if swiotlb buffer if full.
It is not possible to know whether it is simply an out of buffer, or it is
because swiotlb cannot allocate buffer with the requested size due to
fragmentation.

As 'io_tlb_used' is available since commit 71602fe6d4 ("swiotlb: add
debugfs to track swiotlb buffer usage"), both 'io_tlb_used' and
'io_tlb_nslabs' are printed when swiotlb buffer is full.

Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-04-10 12:53:22 -04:00
Christoph Hellwig e43e2657fe x86/dma: Remove the x86_dma_fallback_dev hack
Now that we removed support for the NULL device argument in the DMA API,
there is no need to cater for that in the x86 code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-08 17:52:46 +02:00
Christoph Hellwig d7e02a9312 dma-mapping: remove leftover NULL device support
Most dma_map_ops implementations already had some issues with a NULL
device, or did simply crash if one was fed to them.  Now that we have
cleaned up all the obvious offenders we can stop to pretend we
support this mode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-08 17:52:46 +02:00
Clément Leger c13edf8106 dma: select GENERIC_ALLOCATOR for DMA_REMAP
When DMA_REMAP is enabled, code in remap.c needs generic allocator.
It currently worked since few architectures uses it (arm64, csky) and
they both select GENERIC_ALLOCATOR. Select it when using DMA_REMAP
to have correct dependencies.

Signed-off-by: Clement Leger <clement.leger@kalray.eu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-08 17:51:22 +02:00
Mike Rapoport 26fb3dae0a memblock: drop memblock_alloc_*_nopanic() variants
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.

Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>		[printk]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>				[c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com>			[Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Mike Rapoport 8a7f97b902 treewide: add checks for the return value of memblock_alloc*()
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com>		[c-sky]
Acked-by: Paul Burton <paul.burton@mips.com>		[MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390]
Reviewed-by: Juergen Gross <jgross@suse.com>		[Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com>		[xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Mike Rapoport a0bf842e89 swiotlb: add checks for the return value of memblock_alloc*()
Add panic() calls if memblock_alloc() returns NULL.

The panic() format duplicates the one used by memblock itself and in
order to avoid explosion with long parameters list replace open coded
allocation size calculations with a local variable.

Link: http://lkml.kernel.org/r/1548057848-15136-19-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>				[c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com>			[Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Linus Torvalds 45ba8d5d06 virtio: fixes, cleanups
Several fixes, most notably fix for virtio on swiotlb systems.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcf/Y0AAoJECgfDbjSjVRpzC8H/RG46PnIpTe69jcuaM3zv7es
 Tr2GLl65wPV5AZBGMlRjXEoOt6JknWamROhZL7hJ0/17XX4x1mmEQb9mxweE/TDy
 yDiNueni+NdFEptzQOoVjZahPXDaGYjuXH+wCvmCscg6N7iSXWqpKG08m+yr3ATF
 NBNvB693FLy7B60v4IIHlsYTqoKFeWPYRvE+HIaapTpENodTAjetGpXDIYJhCTRc
 6Yh6uNOYlF7XV8gbYzh4U9IcptrLO4Wv1xcEFMbgUoBeHwEMMpO6pLUFgDZttq0v
 eT7lxu5Wg73hACOEdS1fb9HREXa4jm3Iu4qgLxEDeze8Y/AqlUdd8CJGBSFC32A=
 =1bSe
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "Several fixes, most notably fix for virtio on swiotlb systems"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: silence an unused-variable warning
  virtio: hint if callbacks surprisingly might sleep
  virtio-ccw: wire up ->bus_name callback
  s390/virtio: handle find on invalid queue gracefully
  virtio-ccw: diag 500 may return a negative cookie
  virtio_balloon: remove the unnecessary 0-initialization
  virtio-balloon: improve update_balloon_size_func
  virtio-blk: Consider virtio_max_dma_size() for maximum segment size
  virtio: Introduce virtio_max_dma_size()
  dma: Introduce dma_max_mapping_size()
  swiotlb: Add is_swiotlb_active() function
  swiotlb: Introduce swiotlb_max_mapping_size()
2019-03-10 12:47:57 -07:00
Linus Torvalds b7a7d1c1ec DMA mapping updates for 5.1
- add debugfs support for dumping dma-debug information (Corentin Labbe)
  - Kconfig cleanups (Andy Shevchenko and me)
  - debugfs cleanups (Greg Kroah-Hartman)
  - improve dma_map_resource and use it in the media code
  - arch_setup_dma_ops / arch_teardown_dma_ops cleanups
  - various small cleanups and improvements for the per-device coherent
    allocator
  - make the DMA mask an upper bound and don't fail "too large" dma mask
    in the remaning two architectures - this will allow big driver
    cleanups in the following merge windows
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlyCKUgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYP1vA//WNK5cxQVGZZsmsmkcNe3sCaJCZD4MpVpq/D+l87t
 3j1C1qmduOPyI1m061niYk7j4B4DeyeLs+XOeUsl5Yz+FqVvDICuNHXXJQSUr3Ao
 JbMfBis8Ne65Eyz0xxBltCWM7WiE6fdo7AGoR4Bzj3+f4xGOOazkRy4R6r67bU6x
 v3R5dTvfbSlvvKhn+j8ksAEYb+WPUmr6Z2dnlF0mShnOCpZVy0wd0M1gtEFKrVHx
 zKz9/va4/7yEcpdVqNtSDlHIsSZcFE3ZfTRWq6ZtBoRN+gNwrI0YylY7HtCfJWZG
 IxMiuQ+8SHGE8+NI2d56bs4MsHbqPBRSuadJNuZaTzdxs6FDTEnlCDeXwGF1cHf2
 qhVMfn17V4TZNT4NAd2wHa60cjTMoqraWeS06/b2tyXTF0uxyWj0BCjaHNJa+Ayc
 KCulq1n2LmTDiOGnZJT7Oui6PO5etOHAmvgMQumBNkzQJbPGvuiYGgsciYAMSmuy
 NccIrghQzR9BlG6U1srzTiGQJnpm38x1hWphtU6gQPwz5iKt3FBAfEWCic8U81QE
 JKSwoYv/5ChO+sy9880t/FLO8hn/7L55IOdZEfGkQ22gFzf3W5f9v2jFQc8XN2BO
 Fc6EjWERrmTzUi0f1Ooj3VPRtWuZq86KqlKByy6iZ5eXwxpGE1M0HZVoHYCW+aDd
 MYc=
 =nAMI
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:

 - add debugfs support for dumping dma-debug information (Corentin
   Labbe)

 - Kconfig cleanups (Andy Shevchenko and me)

 - debugfs cleanups (Greg Kroah-Hartman)

 - improve dma_map_resource and use it in the media code

 - arch_setup_dma_ops / arch_teardown_dma_ops cleanups

 - various small cleanups and improvements for the per-device coherent
   allocator

 - make the DMA mask an upper bound and don't fail "too large" dma mask
   in the remaning two architectures - this will allow big driver
   cleanups in the following merge windows

* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
  Documentation/DMA-API-HOWTO: update dma_mask sections
  sparc64/pci_sun4v: allow large DMA masks
  sparc64/iommu: allow large DMA masks
  sparc64: refactor the ali DMA quirk
  ccio: allow large DMA masks
  dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
  dma-mapping: remove dma_mark_declared_memory_occupied
  dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
  dma-mapping: improve selection of dma_declare_coherent availability
  dma-mapping: remove an incorrect __iommem annotation
  of: select OF_RESERVED_MEM automatically
  device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
  mfd/sm501: depend on HAS_DMA
  dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
  dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
  dma-mapping: move debug configuration options to kernel/dma
  dma-debug: add dumping facility via debugfs
  dma: debug: no need to check return value of debugfs_create functions
  videobuf2: replace a layering violation with dma_map_resource
  dma-mapping: don't BUG when calling dma_map_resource on RAM
  ...
2019-03-10 11:54:48 -07:00
Linus Torvalds e4ff63b437 Merge branch 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Expands the SWIOTLB to have debugfs support (along with bug-fixes),
  and a tiny fix"

* 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
  swiotlb: checking whether swiotlb buffer is full with io_tlb_used
  swiotlb: add debugfs to track swiotlb buffer usage
  swiotlb: fix comment on swiotlb_bounce()
2019-03-08 09:48:04 -08:00
Linus Torvalds 6c3ac11343 powerpc updates for 5.1
Notable changes:
 
  - Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
 
  - A big series from Christoph reworking our DMA code to use more of the generic
    infrastructure, as he said:
    "This series switches the powerpc port to use the generic swiotlb and
     noncoherent dma ops, and to use more generic code for the coherent direct
     mapping, as well as removing a lot of dead code."
 
  - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing
    us to support machines with larger amounts of total RAM or distance between
    nodes.
 
  - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and
    another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit
    CPUs.
 
  - Support for KCOV coverage instrumentation which means we can run syzkaller
    and discover even more bugs in our code.
 
 And as always many clean-ups, reworks and minor fixes etc.
 
 Thanks to:
  Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew
  Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh,
  Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy,
  Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun,
  Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley,
  Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh
  Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce,
  Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas
  Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras,
  Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab,
  Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das,
  Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav
  Jain, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcgRJlAAoJEFHr6jzI4aWAL9oP+gPlrZgyaAg/51lmubLtlbtk
 QuGU8EiuJZoJD1OHrMPtppBOY7rQZOxJe58AoPig8wTvs+j/TxJ25fmiZncnf5U2
 PC8QAjbj0UmQHgy+K30sUeOnDg9tdkHKHJ5/ecjJcvykkqsjyMnV7biFQ1cOA0HT
 LflXHEEtiG9P9u7jZoAhtnfpgn1/l9mhTYMe26J1fqvC0164qMDFaXDTQXyDfyvG
 gmuqccGMawSk7IdagmQxwXtwyfwOnarmGn+n31XKRejApGZ/pjiEA23JOJOaJcia
 m76Jy3roao6sEtCUNpBFXEtwOy9POy3OiGy6yg/9896tDMvG84OuO6ltV1nFGawL
 PmwE+ug63L4g/HWxZyAeb26T2oTTp/YIaKQPtsq4d286pvg/qr2KPNzFoAEhmJqU
 yLrebv276pVeiLpLmCLPvcPj9t76vWKZaUm0FoE+zUDg7Rl7Alow8A/c4tdjOI6y
 QwpbCiYseyiJ32lCZZdbN7Cy6+iM6vb3i1oNKc8MVqhBGTwLJnTU0ruPBSvCaRvD
 NoQWO1RWpNu/BuivuLEKS9q3AoxenGwiqowxGhdVmI3Oc9jGWcEYlduR00VDYPVp
 /RCfwtTY5NyC++h5cnbz8aLJ1hBXG5m79CXfprV+zPWeiLPCaMT6w9Y5QUS2wqA+
 EZ734NknDJOjaHc4cGdZ
 =Z9bb
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Enable THREAD_INFO_IN_TASK to move thread_info off the stack.

   - A big series from Christoph reworking our DMA code to use more of
     the generic infrastructure, as he said:
       "This series switches the powerpc port to use the generic swiotlb
        and noncoherent dma ops, and to use more generic code for the
        coherent direct mapping, as well as removing a lot of dead
        code."

   - Increase our vmalloc space to 512T with the Hash MMU on modern
     CPUs, allowing us to support machines with larger amounts of total
     RAM or distance between nodes.

   - Two series from Christophe, one to optimise TLB miss handlers on
     6xx, and another to optimise the way STRICT_KERNEL_RWX is
     implemented on some 32-bit CPUs.

   - Support for KCOV coverage instrumentation which means we can run
     syzkaller and discover even more bugs in our code.

  And as always many clean-ups, reworks and minor fixes etc.

  Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
  Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
  Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
  Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
  Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
  Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
  Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
  Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
  Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
  Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
  Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
  Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
  Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
  Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
  YueHaibing"

* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
  powerpc/32: Clear on-stack exception marker upon exception return
  powerpc: Remove export of save_stack_trace_tsk_reliable()
  powerpc/mm: fix "section_base" set but not used
  powerpc/mm: Fix "sz" set but not used warning
  powerpc/mm: Check secondary hash page table
  powerpc: remove nargs from __SYSCALL
  powerpc/64s: Fix unrelocated interrupt trampoline address test
  powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
  powerpc/fsl: Fix the flush of branch predictor.
  powerpc/powernv: Make opal log only readable by root
  powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
  powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
  powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
  powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
  powerpc/64s: system reset interrupt preserve HSRRs
  powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
  powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
  powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
  selftests/powerpc: Remove duplicate header
  powerpc sstep: Add support for modsd, modud instructions
  ...
2019-03-07 12:56:26 -08:00
Joerg Roedel 133d624b1c dma: Introduce dma_max_mapping_size()
The function returns the maximum size that can be mapped
using DMA-API functions. The patch also adds the
implementation for direct DMA and a new dma_map_ops pointer
so that other implementations can expose their limit.

Cc: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-06 11:19:11 -05:00
Joerg Roedel 492366f7b4 swiotlb: Add is_swiotlb_active() function
This function will be used from dma_direct code to determine
the maximum segment size of a dma mapping.

Cc: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-06 11:19:06 -05:00
Joerg Roedel abe420bfae swiotlb: Introduce swiotlb_max_mapping_size()
The function returns the maximum size that can be remapped
by the SWIOTLB implementation. This function will be later
exposed to users through the DMA-API.

Cc: stable@vger.kernel.org
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-06 11:18:50 -05:00
Christoph Hellwig 82c5de0ab8 dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
All users of dma_declare_coherent want their allocations to be
exclusive, so default to exclusive allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20 07:27:00 -07:00
Christoph Hellwig 91a6fda95c dma-mapping: remove dma_mark_declared_memory_occupied
This API is not used anywhere, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-20 07:27:00 -07:00
Christoph Hellwig ddb26d8e1e dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
This is where all the related code already lives.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20 07:27:00 -07:00
Christoph Hellwig ff4c25f26a dma-mapping: improve selection of dma_declare_coherent availability
This API is primarily used through DT entries, but two architectures
and two drivers call it directly.  So instead of selecting the config
symbol for random architectures pull it in implicitly for the actual
users.  Also rename the Kconfig option to describe the feature better.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20 07:26:35 -07:00
Christoph Hellwig feee96440c swiotlb: remove swiotlb_dma_supported
The only user left is powerpc, but even there the generic dma-direct
version works just as well, given that we guarantee that the swiotlb
buffer must always be addressable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18 22:41:04 +11:00
Christoph Hellwig 11ddce1545 dma-mapping, powerpc: simplify the arch dma_set_mask override
Instead of letting the architecture supply all of dma_set_mask just
give it an additional hook selected by Kconfig.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18 22:41:03 +11:00
Christoph Hellwig ffe3dfd4e3 powerpc/dma: stop overriding dma_get_required_mask
The ppc_md and pci_controller_ops methods are unused now and can be
removed.  The dma_nommu implementation is generic to the generic one
except for using max_pfn instead of calling into the memblock API,
and all other dma_map_ops instances implement a method of their own.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18 22:41:03 +11:00
Christoph Hellwig fbce251baa dma-direct: we might need GFP_DMA for 32-bit dma masks
If there is no ZONE_DMA32 we might need GFP_DMA to be able to
allocate memory that satisfies a 32-bit DMA mask.

Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-18 22:41:01 +11:00
YueHaibing 22cb45d769 swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
There is no need to have the 'struct dentry *d_swiotlb_usage' variable
static since new value always be assigned before use it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-16 11:36:34 -05:00
Christoph Hellwig be4311a262 dma-mapping: remove an incorrect __iommem annotation
memmap return a regular void pointer, not and __iomem one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-13 19:19:50 +01:00
Christoph Hellwig dc2acded38 dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-02-13 19:12:50 +01:00
Christoph Hellwig 347cb6af87 dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-02-13 19:12:33 +01:00
Andy Shevchenko 70ca7ba2db dma-mapping: move debug configuration options to kernel/dma
This is a follow up to the commit cf65a0f6f6

  ("dma-mapping: move all DMA mapping code to kernel/dma")

which moved source code of DMA API to kernel/dma folder. Since there is
no file left in the lib that require DMA API debugging options move the
latter to kernel/dma as well.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-13 19:11:35 +01:00
Dongli Zhang 60513ed06a swiotlb: checking whether swiotlb buffer is full with io_tlb_used
This patch uses io_tlb_used to help check whether swiotlb buffer is full.
io_tlb_used is no longer used for only debugfs. It is also used to help
optimize swiotlb_tbl_map_single().

Suggested-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12 12:53:01 -05:00
Dongli Zhang 71602fe6d4 swiotlb: add debugfs to track swiotlb buffer usage
The device driver will not be able to do dma operations once swiotlb buffer
is full, either because the driver is using so many IO TLB blocks inflight,
or because there is memory leak issue in device driver. To export the
swiotlb buffer usage via debugfs would help the user estimate the size of
swiotlb buffer to pre-allocate or analyze device driver memory leak issue.

Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12 12:53:01 -05:00
Dongli Zhang 6442ca2abf swiotlb: fix comment on swiotlb_bounce()
Fix the comment as swiotlb_bounce() is used to copy from original dma
location to swiotlb buffer during swiotlb_tbl_map_single(), while to
copy from swiotlb buffer to original dma location during
swiotlb_tbl_unmap_single().

Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12 12:53:01 -05:00
Corentin Labbe 0a3b192c26 dma-debug: add dumping facility via debugfs
While debugging a DMA mapping leak, I needed to access
debug_dma_dump_mappings() but easily from user space.

This patch adds a /sys/kernel/debug/dma-api/dump file which contain all
current DMA mapping.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-01 10:06:44 +01:00
Greg Kroah-Hartman 8e4d81b98b dma: debug: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Also delete the variables for the file dentries for the debugfs entries
as they are never used at all once they are created.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[hch: moved dma_debug_dent to function scope and renamed it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-02-01 10:02:32 +01:00
Christoph Hellwig cfced78696 dma-mapping: remove the default map_resource implementation
Instead provide a proper implementation in the direct mapping code, and
also wire it up for arm and powerpc, leaving an error return for all the
IOMMU or virtual mapping instances for which we'd have to wire up an
actual implementation

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-02-01 09:56:15 +01:00
Christoph Hellwig 227a76b647 swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit
Otherwise is_swiotlb_buffer will return false positives when
we first initialize a swiotlb buffer, but then free it because
we have an IOMMU available.

Fixes: 55897af630 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Reported-by: Sibren Vasse <sibren@sibrenvasse.nl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sibren Vasse <sibren@sibrenvasse.nl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-01-16 09:59:17 -05:00
Christoph Hellwig 8270f3a11c dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations
We need to return a dma_addr_t even if we don't have a kernel mapping.
Do so by consolidating the phys_to_dma call in a single place and jump
to it from all the branches that return successfully.

Fixes: bfd56cd605 ("dma-mapping: support highmem in the generic remap allocator")
Reported-by: Liviu Dudau <liviu@dudau.co.uk
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>
2019-01-05 08:28:29 +01:00
Christoph Hellwig 48e638fb68 dma-mapping: remove a few unused exports
Now that the slow path DMA API calls are implemented out of line a few
helpers only used by them don't need to be exported anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04 09:03:17 +01:00
Christoph Hellwig 4788ba5792 dma-mapping: remove dmam_{declare,release}_coherent_memory
These functions have never been used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04 09:03:17 +01:00
Christoph Hellwig d7076f0784 dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs
dmam_alloc_coherent is just the default no-flags case of
dmam_alloc_attrs, so take advantage of this similar to the non-managed
version.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04 09:03:16 +01:00
Christoph Hellwig 2e05ea5cdc dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
And also switch the way we implement the unmap side around to stay
consistent.  This ensures dma-debug works again because it records which
function we used for mapping to ensure it is also used for unmapping,
and also reduces further code duplication.  Last but not least this
also officially allows calling dma_sync_single_* for mappings created
using dma_map_page, which is perfectly fine given that the sync calls
only take a dma_addr_t, but not a virtual address or struct page.

Fixes: 7f0fee242e ("dma-mapping: merge dma_unmap_page_attrs and dma_unmap_single_attrs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: LABBE Corentin <clabbe.montjoie@gmail.com>
2019-01-04 09:02:17 +01:00
Linus Torvalds af7ddd8a62 DMA mapping updates for Linux 4.21
A huge update this time, but a lot of that is just consolidating or
 removing code:
 
  - provide a common DMA_MAPPING_ERROR definition and avoid indirect
    calls for dma_map_* error checking
  - use direct calls for the DMA direct mapping case, avoiding huge
    retpoline overhead for high performance workloads
  - merge the swiotlb dma_map_ops into dma-direct
  - provide a generic remapping DMA consistent allocator for architectures
    that have devices that perform DMA that is not cache coherent. Based
    on the existing arm64 implementation and also used for csky now.
  - improve the dma-debug infrastructure, including dynamic allocation
    of entries (Robin Murphy)
  - default to providing chaining scatterlist everywhere, with opt-outs
    for the few architectures (alpha, parisc, most arm32 variants) that
    can't cope with it
  - misc sparc32 dma-related cleanups
  - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
    replace it with the generic noncoherent infrastructure
  - fix the return type of dma_set_max_seg_size (Niklas Söderlund)
  - move the dummy dma ops for not DMA capable devices from arm64 to
    common code (Robin Murphy)
  - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
    leaks through userspace.  We already did this for most common
    architectures, but this ensures we do it everywhere.
    dma_zalloc_coherent has been deprecated and can hopefully be
    removed after -rc1 with a coccinelle script.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlwctQgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMxgQ//dBpAfS4/J76CdAbYry2zqgcOUU9hIrD6NHiEMWov
 ltJxyvEl3LsUmIdEj3aCrYL9jZN0qsnCzn5BVj2c3jDIVgD64fAr7HDf/PbEEfKb
 j6/GgEnVLPZV+sQMvhNA5jOzHrkseaqPa4/pNLFZ/l8jnuZ2d+btusDWJpMoVDer
 TXVwtIfgeIu0gTygYOShLYXd5qptWKWsZEpbTZOO2sE6+x+ZJX7yQYUxYDTlcOIj
 JWVO2l5QNHPc5T9o2at+6L5aNUvnZOxT79sWgyZLn0Kc+FagKAVwfLqUEl0v7foG
 8k/xca5/8p3afB1DfrIrtplJqis7cVgdyGxriwuuoO8X4F0nPyWwpGmxsBhrWwwl
 xTqC4UorEJ7QwoP6Azopk/vYI2QXIUBLjuCJCuFXZj9+2BGf4IfvBY1S2cLM9qLs
 HMcxQonuXJii044KEFS96ePEuiT+igVINweIFBKWcgNCEG0UQtyL6RQ1U5297ipF
 JiWZAqD+p9X52UdKS+oKfAiZEekMXn6Xyo97+YCiNpfOo0GP5eEcwhL+JpY4AiRq
 apPXtsRy2o1s8yfjdraUIM2Mc2n62vFKb35oUbGCd/QO9piPrFQHl6T0HHcHk4YR
 XrUXcHieFZBCYqh7ZVa4RL8Msq1wvGuTL4Dxl43mXdsMoUFRR6eSNWLoAV4IpOLZ
 WgA=
 =in72
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:
 "A huge update this time, but a lot of that is just consolidating or
  removing code:

   - provide a common DMA_MAPPING_ERROR definition and avoid indirect
     calls for dma_map_* error checking

   - use direct calls for the DMA direct mapping case, avoiding huge
     retpoline overhead for high performance workloads

   - merge the swiotlb dma_map_ops into dma-direct

   - provide a generic remapping DMA consistent allocator for
     architectures that have devices that perform DMA that is not cache
     coherent. Based on the existing arm64 implementation and also used
     for csky now.

   - improve the dma-debug infrastructure, including dynamic allocation
     of entries (Robin Murphy)

   - default to providing chaining scatterlist everywhere, with opt-outs
     for the few architectures (alpha, parisc, most arm32 variants) that
     can't cope with it

   - misc sparc32 dma-related cleanups

   - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
     replace it with the generic noncoherent infrastructure

   - fix the return type of dma_set_max_seg_size (Niklas Söderlund)

   - move the dummy dma ops for not DMA capable devices from arm64 to
     common code (Robin Murphy)

   - ensure dma_alloc_coherent returns zeroed memory to avoid kernel
     data leaks through userspace. We already did this for most common
     architectures, but this ensures we do it everywhere.
     dma_zalloc_coherent has been deprecated and can hopefully be
     removed after -rc1 with a coccinelle script"

* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
  dma-mapping: fix inverted logic in dma_supported
  dma-mapping: deprecate dma_zalloc_coherent
  dma-mapping: zero memory returned from dma_alloc_*
  sparc/iommu: fix ->map_sg return value
  sparc/io-unit: fix ->map_sg return value
  arm64: default to the direct mapping in get_arch_dma_ops
  PCI: Remove unused attr variable in pci_dma_configure
  ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
  dma-mapping: bypass indirect calls for dma-direct
  vmd: use the proper dma_* APIs instead of direct methods calls
  dma-direct: merge swiotlb_dma_ops into the dma_direct code
  dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
  dma-direct: improve addressability error reporting
  swiotlb: remove dma_mark_clean
  swiotlb: remove SWIOTLB_MAP_ERROR
  ACPI / scan: Refactor _CCA enforcement
  dma-mapping: factor out dummy DMA ops
  dma-mapping: always build the direct mapping code
  dma-mapping: move dma_cache_sync out of line
  dma-mapping: move various slow path functions out of line
  ...
2018-12-28 14:12:21 -08:00
Thierry Reding 8b1cce9f58 dma-mapping: fix inverted logic in dma_supported
The cleanup in commit 356da6d0cd ("dma-mapping: bypass indirect calls
for dma-direct") accidentally inverted the logic in the check for the
presence of a ->dma_supported() callback. Switch this back to the way it
was to prevent a crash on boot.

Fixes: 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-20 17:47:55 +01:00
Christoph Hellwig 518a2f1925 dma-mapping: zero memory returned from dma_alloc_*
If we want to map memory from the DMA allocator to userspace it must be
zeroed at allocation time to prevent stale data leaks.   We already do
this on most common architectures, but some architectures don't do this
yet, fix them up, either by passing GFP_ZERO when we use the normal page
allocator or doing a manual memset otherwise.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Sam Ravnborg <sam@ravnborg.org> [sparc]
2018-12-20 08:13:52 +01:00
Lendacky, Thomas c92a54cfa0 dma-direct: do not include SME mask in the DMA supported check
The dma_direct_supported() function intends to check the DMA mask against
specific values. However, the phys_to_dma() function includes the SME
encryption mask, which defeats the intended purpose of the check. This
results in drivers that support less than 48-bit DMA (SME encryption mask
is bit 47) from being able to set the DMA mask successfully when SME is
active, which results in the driver failing to initialize.

Change the function used to check the mask from phys_to_dma() to
__phys_to_dma() so that the SME encryption mask is not part of the check.

Fixes: c1d0af1a1d ("kernel/dma/direct: take DMA offset into account in dma_direct_supported")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-17 18:02:11 +01:00
Christoph Hellwig 356da6d0cd dma-mapping: bypass indirect calls for dma-direct
Avoid expensive indirect calls in the fast path DMA mapping
operations by directly calling the dma_direct_* ops if we are using
the directly mapped DMA operations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:18 +01:00
Christoph Hellwig 55897af630 dma-direct: merge swiotlb_dma_ops into the dma_direct code
While the dma-direct code is (relatively) clean and simple we actually
have to use the swiotlb ops for the mapping on many architectures due
to devices with addressing limits.  Instead of keeping two
implementations around this commit allows the dma-direct
implementation to call the swiotlb bounce buffering functions and
thus share the guts of the mapping implementation.  This also
simplified the dma-mapping setup on a few architectures where we
don't have to differenciate which implementation to use.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:17 +01:00
Christoph Hellwig 17ac524719 dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
No need to duplicate the mapping logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:16 +01:00
Christoph Hellwig 58dfd4ac02 dma-direct: improve addressability error reporting
Only report report a DMA addressability report once to avoid spewing the
kernel log with repeated message.  Also provide a stack trace to make it
easy to find the actual caller that caused the problem.

Last but not least move the actual check into the fast path and only
leave the error reporting in a helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:15 +01:00
Christoph Hellwig 68c608345c swiotlb: remove dma_mark_clean
Instead of providing a special dma_mark_clean hook just for ia64, switch
ia64 to use the normal arch_sync_dma_for_cpu hooks instead.

This means that we now also set the PG_arch_1 bit for pages in the
swiotlb buffer, which isn't stricly needed as we will never execute code
out of the swiotlb buffer, but otherwise harmless.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:14 +01:00
Christoph Hellwig b907e20508 swiotlb: remove SWIOTLB_MAP_ERROR
We can use DMA_MAPPING_ERROR instead, which already maps to the same
value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:13 +01:00
Robin Murphy 90ac706e98 dma-mapping: factor out dummy DMA ops
The dummy DMA ops are currently used by arm64 for any device which has
an invalid ACPI description and is thus barred from using DMA due to not
knowing whether is is cache-coherent or not. Factor these out into
general dma-mapping code so that they can be referenced from other
common code paths. In the process, we can prune all the optional
callbacks which just do the same thing as the default behaviour, and
fill in .map_resource for completeness.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[hch: moved to a separate source file]
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13 21:06:12 +01:00
Christoph Hellwig 3731c3d477 dma-mapping: always build the direct mapping code
All architectures except for sparc64 use the dma-direct code in some
form, and even for sparc64 we had the discussion of a direct mapping
mode a while ago.  In preparation for directly calling the direct
mapping code don't bother having it optionally but always build the
code in.  This is a minor hardship for some powerpc and arm configs
that don't pull it in yet (although they should in a relase ot two),
and sparc64 which currently doesn't need it at all, but it will
reduce the ifdef mess we'd otherwise need significantly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:11 +01:00
Christoph Hellwig 8ddbe5943c dma-mapping: move dma_cache_sync out of line
This isn't exactly a slow path routine, but it is not super critical
either, and moving it out of line will help to keep the include chain
clean for the following DMA indirection bypass work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:10 +01:00
Christoph Hellwig 7249c1a52d dma-mapping: move various slow path functions out of line
There is no need to have all setup and coherent allocation / freeing
routines inline.  Move them out of line to keep the implemeation
nicely encapsulated and save some kernel text size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:10 +01:00
Christoph Hellwig 05887cb610 dma-mapping: move dma_get_required_mask to kernel/dma
dma_get_required_mask should really be with the rest of the DMA mapping
implementation instead of in drivers/base as a lone outlier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:09 +01:00
Christoph Hellwig 8d59b5f2a4 dma-mapping: simplify the dma_sync_single_range_for_{cpu,device} implementation
We can just call the regular calls after adding offset the the address instead
of reimplementing them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:08 +01:00
Christoph Hellwig 20b105feda dma-mapping: remove a pointless memset in dma_atomic_pool_init
We already zero the memory after allocating it from the pool that
this function fills, and having the memset here in this form means
we can't support CMA highmem allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
2018-12-13 21:05:20 +01:00
Robin Murphy ad78dee0b6 dma-debug: Batch dma_debug_entry allocation
DMA debug entries are one of those things which aren't that useful
individually - we will always want some larger quantity of them - and
which we don't really need to manage the exact number of - we only care
about having 'enough'. In that regard, the current behaviour of creating
them one-by-one leads to a lot of unwarranted function call overhead and
memory wasted on alignment padding.

Now that we don't have to worry about freeing anything via
dma_debug_resize_entries(), we can optimise the allocation behaviour by
grabbing whole pages at once, which will save considerably on the
aforementioned overheads, and probably offer a little more cache/TLB
locality benefit for traversing the lists under normal operation. This
should also give even less reason for an architecture-level override of
the preallocation size, so make the definition unconditional - if there
is still any desire to change the compile-time value for some platforms
it would be better off as a Kconfig option anyway.

Since freeing a whole page of entries at once becomes enough of a
challenge that it's not really worth complicating dma_debug_init(), we
may as well tweak the preallocation behaviour such that as long as we
manage to allocate *some* pages, we can leave debugging enabled on a
best-effort basis rather than otherwise wasting them.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11 14:32:13 +01:00
Robin Murphy 0cb0e25e42 dma/debug: Remove dma_debug_resize_entries()
With the only caller now gone, we can clean up this part of dma-debug's
exposed internals and make way to tweak the allocation behaviour.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11 14:32:13 +01:00
Robin Murphy ceb51173b2 dma-debug: Make leak-like behaviour apparent
Now that we can dynamically allocate DMA debug entries to cope with
drivers maintaining excessively large numbers of live mappings, a driver
which *does* actually have a bug leaking mappings (and is not unloaded)
will no longer trigger the "DMA-API: debugging out of memory - disabling"
message until it gets to actual kernel OOM conditions, which means it
could go unnoticed for a while. To that end, let's inform the user each
time the pool has grown to a multiple of its initial size, which should
make it apparent that they either have a leak or might want to increase
the preallocation size.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11 14:31:18 +01:00
Robin Murphy 2b9d9ac02b dma-debug: Dynamically expand the dma_debug_entry pool
Certain drivers such as large multi-queue network adapters can use pools
of mapped DMA buffers larger than the default dma_debug_entry pool of
65536 entries, with the result that merely probing such a device can
cause DMA debug to disable itself during boot unless explicitly given an
appropriate "dma_debug_entries=..." option.

Developers trying to debug some other driver on such a system may not be
immediately aware of this, and at worst it can hide bugs if they fail to
realise that dma-debug has already disabled itself unexpectedly by the
time their code of interest gets to run. Even once they do realise, it
can be a bit of a pain to emprirically determine a suitable number of
preallocated entries to configure, short of massively over-allocating.

There's really no need for such a static limit, though, since we can
quite easily expand the pool at runtime in those rare cases that the
preallocated entries are insufficient, which is arguably the least
surprising and most useful behaviour. To that end, refactor the
prealloc_memory() logic a little bit to generalise it for runtime
reallocations as well.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11 14:31:17 +01:00
Robin Murphy f737b095c6 dma-debug: Use pr_fmt()
Use pr_fmt() to generate the "DMA-API: " prefix consistently. This
results in it being added to a couple of pr_*() messages which were
missing it before, and for the err_printk() calls moves it to the actual
start of the message instead of somewhere in the middle.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11 14:31:17 +01:00
Robin Murphy 9f191555ba dma-debug: Expose nr_total_entries in debugfs
Expose nr_total_entries in debugfs, so that {num,min}_free_entries
become even more meaningful to users interested in current/maximum
utilisation. This becomes even more relevant once nr_total_entries
may change at runtime beyond just the existing AMD GART debug code.

Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-11 14:31:17 +01:00
Christoph Hellwig b0cbeae494 dma-direct: remove the mapping_error dma_map_ops method
The dma-direct code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06 06:56:36 -08:00
Marek Szyprowski a1da439cc0 dma-mapping: fix lack of DMA address assignment in generic remap allocator
Commit bfd56cd605 ("dma-mapping: support highmem in the generic remap
allocator") replaced dma_direct_alloc_pages() with __dma_direct_alloc_pages(),
which doesn't set dma_handle and zero allocated memory. Fix it by doing this
directly in the caller function.

Fixes: bfd56cd605 ("dma-mapping: support highmem in the generic remap allocator")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-05 05:49:10 -08:00
Christoph Hellwig e440e26a02 dma-remap: support DMA_ATTR_NO_KERNEL_MAPPING
Do not waste vmalloc space on allocations that do not require a mapping
into the kernel address space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-12-01 18:07:14 +01:00
Christoph Hellwig bfd56cd605 dma-mapping: support highmem in the generic remap allocator
By using __dma_direct_alloc_pages we can deal entirely with struct page
instead of having to derive a kernel virtual address.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-12-01 18:07:14 +01:00
Christoph Hellwig 0c3b3171ce dma-mapping: move the arm64 noncoherent alloc/free support to common code
The arm64 codebase to implement coherent dma allocation for architectures
with non-coherent DMA is a good start for a generic implementation, given
that is uses the generic remap helpers, provides the atomic pool for
allocations that can't sleep and still is realtively simple and well
tested.  Move it to kernel/dma and allow architectures to opt into it
using a config symbol.  Architectures just need to provide a new
arch_dma_prep_coherent helper to writeback an invalidate the caches
for any memory that gets remapped for uncached access.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-12-01 18:07:11 +01:00
Christoph Hellwig f0edfea8ef dma-mapping: move the remap helpers to a separate file
The dma remap code only makes sense for not cache coherent architectures
(or possibly the corner case of highmem CMA allocations) and currently
is only used by arm, arm64, csky and xtensa.  Split it out into a
separate file with a separate Kconfig symbol, which gets the right
copyright notice given that this code was written by Laura Abbott
working for Code Aurora at that point.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-12-01 17:58:34 +01:00
Christoph Hellwig 704f2c20ea dma-direct: reject highmem pages from dma_alloc_from_contiguous
dma_alloc_from_contiguous can return highmem pages depending on the
setup, which a plain non-remapping DMA allocator can't handle.  Detect
this case and fail the allocation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-12-01 17:56:08 +01:00
Christoph Hellwig b18814e767 dma-direct: provide page based alloc/free helpers
Some architectures support remapping highmem into DMA coherent
allocations.  To use the common code for them we need variants of
dma_direct_{alloc,free}_pages that do not use kernel virtual addresses.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-12-01 17:55:02 +01:00
Robin Murphy cb216b84d6 swiotlb: Skip cache maintenance on map error
If swiotlb_bounce_page() failed, calling arch_sync_dma_for_device() may
lead to such delights as performing cache maintenance on whatever
address phys_to_virt(SWIOTLB_MAP_ERROR) looks like, which is typically
outside the kernel memory map and goes about as well as expected.

Don't do that.

Fixes: a4a4330db4 ("swiotlb: add support for non-coherent DMA")
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-21 18:47:58 +01:00
Mike Rapoport 57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00