Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code from
the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it, drop
a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the code from
gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap,
gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd
-----BEGIN PGP SIGNATURE-----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=X+sP
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
V4L2_STD_ALL advertises more standards than these boards
actually support. This causes a V4L2 compliance issue. Limit
the supported standards to those that are actually implemented.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vbi stream comes from the same video input as the video
stream. So all the related ioctls to that are just as valid
for the vbi stream.
Add these.
This fixes a V4L2 compliance issue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The tuner input uses different tvnorms compared to the
S-Video/Composite inputs. So update the tvnorms field
in struct video_device when switching inputs.
This fixes a V4L2 compliance issue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Convert this driver from the old videobuf framework to the vb2
frame.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead use vv->resources and video_drvdata(file) to
obtain this information.
This prepares for the vb2 conversion later when saa7146_fh is
dropped completely.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When this driver is loaded for the first time, input 0 is
not initialized. In order to capture from that input you would
have to switch to input 1, then back to 0.
Properly initialize the input when the driver is loaded.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Structures passed to subdev pad operations are all zero-initialized when
declaring variables. In most cases, this is done with designated
initializers to initialize some of the fields to specific values, but in
a minority of cases the structures are zero-initialized by assigning
them to '{ 0 }' or '{ }'.
Improve coding style consistency by using designated initializers where
possible, always initializing the 'which' field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Several drivers call subdev pad operations, passing structures that are
not fully zeroed. While the drivers initialize the fields they care
about explicitly, this results in reserved fields having uninitialized
values. Future kernel API changes that make use of those fields thus
risk breaking proper driver operation in ways that could be hard to
detect.
To avoid this, make the code more robust by zero-initializing all the
structures passed to subdev pad operation. Maintain a consistent coding
style by preferring designated initializers (which zero-initialize all
the fields that are not specified) over memset() where possible, and
make variable declarations local to inner scopes where applicable. One
notable exception to this rule is in the ipu3 driver, where a memset()
is needed as the structure is not a local variable but a function
parameter provided by the caller.
Not all fields of those structures can be initialized when declaring the
variables, as the values for those fields are computed later in the
code. Initialize the 'which' field in all cases, and other fields when
the variable declaration is so close to the v4l2_subdev_call() call that
it keeps all the context easily visible when reading the code, to avoid
hindering readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # For vimc
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # For drivers/staging/media/imx/
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit 0d346d2a6f ("media: v4l2-subdev: add subdev-wide state struct")
applied a large media tree-wide change produced by coccinelle. It was so
large that a set of identical indentation issues went unnoticed during
review. Fix them.
While at it, and because it's easy to review both changes together, add
a trailing comma for the last (and only) struct member initialization of
the related structures, to avoid future changes should new fields need
to be initialized.
Fixes: 0d346d2a6f ("media: v4l2-subdev: add subdev-wide state struct")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add more camera sensors into the supported camera sensors list
to make cio2-bridge to support more camera sensors.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In current cio2-bridge, it is using the hid name to register software
node and software node will create kobject and sysfs entry according to
the node name, if there are multiple sensors and VCMs which are sharing
same HID name, it will cause the software nodes registration failure:
sysfs: cannot create duplicate filename '/kernel/software_nodes/dw9714'
...
Call Trace:
software_node_register_nodes
cio2_bridge_init
...
kobject_add_internal failed for dw9714 with -EEXIST,
don't try to register things with the same name in the same directory.
One solution is appending the sensor link(Mipi Port) in SSDB as suffix
of the node name to fix this problem.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In saa7134_initdev, it will call saa7134_hwinit1. There are three
function invoking here: saa7134_video_init1, saa7134_ts_init1
and saa7134_vbi_init1.
All of them will init a timer with same function. Take
saa7134_video_init1 as an example. It'll bound &dev->video_q.timeout
with saa7134_buffer_timeout.
In buffer_activate, the timer funtcion is started.
If we remove the module or device which will call saa7134_finidev
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.
Fix it by canceling the timer works accordingly before cleanup in
saa7134_finidev.
CPU0 CPU1
|saa7134_buffer_timeout
saa7134_finidev |
kfree(dev); |
|
| saa7134_buffer_next
| //use dev
Fixes: 1e7126b4a8 ("media: saa7134: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In dm1105_probe, it called dm1105_ir_init and bound
&dm1105->ir.work with dm1105_emit_key.
When it handles IRQ request with dm1105_irq,
it may call schedule_work to start the work.
When we call dm1105_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in dm1105_remove
CPU0 CPU1
|dm1105_emit_key
dm1105_remove |
dm1105_ir_exit |
rc_unregister_device |
rc_free_device |
rc_dev_release |
kfree(dev); |
|
| rc_keydown
| //use
Fixes: 34d2f9bf18 ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Destructive overlay support (i.e. where the video frame is DMA-ed
straight into a framebuffer) is effectively dead. It was a
necessary evil in the early days when computers were not fast enough
to copy SDTV video frames around, but today that's no longer a problem.
It requires access to the framebuffer memory, which is a bad idea and
very hard to do safely. In addition, in drm it is today almost
impossible to get hold of the framebuffer address.
So drop support for this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Destructive overlay support (i.e. where the video frame is DMA-ed
straight into a framebuffer) is effectively dead. It was a
necessary evil in the early days when computers were not fast enough
to copy SDTV video frames around, but today that's no longer a problem.
It requires access to the framebuffer memory, which is a bad idea and
very hard to do safely. In addition, in drm it is today almost
impossible to get hold of the framebuffer address.
So drop support for this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
These overlay-related functions no longer exist, so drop them
from the header.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the driver calls tw68_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
buf->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.
This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.
We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of tw68_risc_buffer()
and the value of buf->cpu before buffer free.
Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the driver calls cx23885_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
risc->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.
This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.
We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of cx23885_risc_buffer()
and the value of risc->cpu before buffer free.
Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
dvb_net.h includes a bunch of core networking headers which increases
the number of objects rebuilt when we touch them. They are unnecessary
for the header itself and only one driver has an indirect dependency.
tveeprom.h includes if_packet to gain access to ETH_ALEN. This
is a bit of an overkill because if_packet.h pulls in skbuff.h.
The definition of ETH_ALEN is in the uAPI header, which is
very rarely touched, so switch to including that.
This results in roughly 250 fewer objects built when skbuff.h
is touched (6028 -> 5788).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This properly fills in all the format fields and calculates the
width and height correctly.
Esp. the minimum width and height was wrong.
When changing the standard the width and height also have to be
reset to the corresponding default width/height for the chosen
standard.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
No actual code changed, this just reorders functions so that the
g/try/s_fmt_vid_cap functions are all together rather than mixed in
with the vbi format functions.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The v4l2-compliance test complained about this. You can change the
input connector for the vbi stream, but that means that you can have to
be able to do the same for the audio input.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MPEG device reported non-MPEG pixelformats, and the YUV device reported
the MPEG pixelformat as well.
Separate the two: either report MPEG or HM12/UYUV, not all three.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Counting the number of video and audio inputs was wrong if the
number of inputs equalled CX18_CARD_MAX_VIDEO_INPUTS or
CX18_CARD_MAX_AUDIO_INPUTS. This was a copy-and-paste from the
ivtv driver. That driver has been fixed quite a long time ago,
but we missed that this driver had the same bug.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch converts cx18 from the old deprecated videobuf framework
to the 'new' vb2 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are only a handful of users of gpio_export() and
related functions.
As these are just wrappers around the modern gpiod_export()
helper, remove the wrappers and open-code the gpio_to_desc
in all callers to shrink the legacy API.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=0XIw
-----END PGP SIGNATURE-----
Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
stkwebcam, tm6000, vpfe_capture and zr364xx
- saa7146 recovered from staging/deprecated. We opted to give ti a
chance, and, instead of deprecating it, the intention is to write
patches migrating it from VB1 to VB2.
- av7110 returned from staging/deprecated/ to staging/ as we're not
planning on dropping it any time soon
- media controller API has gained experimental support for G_ROUTING
and streams API. No drivers use it right now. We're planning to add
one after -rc1, giving some time to experience the API and eventually
have changes during the next development cycle
- New sensor drivers: imx296, imx415, ov8858
- Atomisp had lots of changes, specially on its sensor's interface,
making atomisp sensor drivers closer to normal sensor drivers
- media controller kAPI has gained some helpers to traverse pipelines
- uvcvideo now better support power line control
- lots of bug fixes, cleanups and driver improvements
* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
media: imx-mipi-csis: Check csis_fmt validity before use
media: v4l2-subdev.c: clear stream field
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
media: imx-pxp: convert to regmap
media: imx-pxp: Use non-threaded IRQ
media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
media: imx-pxp: Implement frame size enumeration
media: imx-pxp: Pass pixel format value to find_format()
media: imx-pxp: Add media controller support
media: imx-pxp: Don't set bus_info manually in .querycap()
media: imx-pxp: Sort headers alphabetically
media: imx-pxp: add support for i.MX7D
media: imx-pxp: make data_path_ctrl0 platform dependent
media: imx-pxp: disable LUT block
media: imx-pxp: explicitly disable unused blocks
media: imx-pxp: extract helper function to setup data path
media: imx-pxp: detect PXP version
media: dt-bindings: media: fsl-pxp: convert to yaml
...
This reverts commit e33fdb5a02.
The saa7146-based devices are still in use, esp. for DVB. So move
these drivers back to mainline.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The radio device doesn't use vb2, thus calling vb2_video_unregister_device()
which results in the following warning being printed on module unload.
WARNING: CPU: 1 PID: 215963 at drivers/media/common/videobuf2/videobuf2-v4l2.c:1236 vb2_video_unregister_device+0xc6/0xe0 [videobuf2_v4l2]
Fixes: 11788d9b7e ("media: media/pci: use vb2_video_unregister_device()")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.
Fixes: commit c2a6a07afe ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The currently used software_node_register_nodes() is going to
be removed. Prepare driver by switching to a new API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20221228094922.84119-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use acpi_fwnode_handle() instead of dereferencing an fwnode handle directly,
which is a better coding practice.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20221228094922.84119-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
- More userfaultfs work from Peter Xu.
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
- Some filemap cleanups from Vishal Moola.
- David Hildenbrand added the ability to selftest anon memory COW handling.
- Some cpuset simplifications from Liu Shixin.
- Addition of vmalloc tracing support by Uladzislau Rezki.
- Some pagecache folioifications and simplifications from Matthew Wilcox.
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword. This series shold have been in the
non-MM tree, my bad.
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages.
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages.
- Peter Xu utilized the PTE marker code for handling swapin errors.
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient.
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand.
- zram support for multiple compression streams from Sergey Senozhatsky.
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway.
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations.
- Vishal Moola removed the try_to_release_page() wrapper.
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache.
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking.
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend.
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range().
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen.
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect.
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages().
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting.
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines.
- Many singleton patches, as usual.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
CodAgiA51qwzId3GRytIo/tfWZSezgA=
=d19R
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
Tag branch
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree: (31 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
258 | i2c_unregister_device(sensor->vcm_i2c_client);
| ^~~~~~~~~~~~~~~~~~~~~
| spi_unregister_device
Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add missing pci_disable_device() in the error path in saa7164_initdev().
Fixes: 443c1228d5 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
FOLL_FORCE is really only for ptrace access. R/O pinning a page is
supposed to fail if the VMA misses proper access permissions (no VM_READ).
Let's just remove FOLL_FORCE usage here; there would have to be a pretty
good reason to allow arbitrary drivers to R/O pin pages in a PROT_NONE
VMA. Most probably, FOLL_FORCE usage is just some legacy leftover.
Link: https://lkml.kernel.org/r/20221116102659.70287-16-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
258 | i2c_unregister_device(sensor->vcm_i2c_client);
| ^~~~~~~~~~~~~~~~~~~~~
| spi_unregister_device
Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: dcae5dacbc ("[media] solo6x10: sync to latest code from Bluecherry's git repo")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The devnode() in struct class should not be modifying the device that is
passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Justin Sanders <justin@coraid.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sean Young <sean@mess.org>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: alsa-devel@alsa-project.org
Cc: dri-devel@lists.freedesktop.org
Cc: kvm@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-block@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20221123122523.1332370-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable cnt is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
jpg_bufsize and v4l_bufsize have been removed since
commit 202ddbc9a3 ("media: staging: media: zoran:
clean unused code"), so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
tea5757_set_freq has been removed since
commit 1b50037315 ("[media] bttv: Convert to generic
TEA575x interface").
So tea5757_set_freq is a unused declaration, remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Linus Torvalds
Hans Verkuil
Laurent Pinchart
Bingbu Cao
Zheng Wang
harperchen
Jakub Kicinski
Greg Kroah-Hartman
Arnd Bergmann
Tasos Sahanidis
Sakari Ailus
Andy Shevchenko
Steven Rostedt (Google)
Mauro Carvalho Chehab
Christophe JAILLET
Adam Borowski
Liu Shixin
David Hildenbrand
Lecopzer Chen
Yang Yingliang
Colin Ian King
Gaosheng Cui