Spectrum ASICs have a configurable limit on how deep into the packet
they parse. By default, the limit is 96 bytes.
There are several cases where this parsing depth is not enough and there
is a need to increase it. For example, timestamping of PTP packets and a
FIB multipath hash policy that requires hashing on inner fields. The
driver therefore maintains a reference count that reflects the number of
consumers that require an increased parsing depth.
During reload_down() the parsing depth reference count does not
necessarily drop to zero, but the parsing depth itself is restored to
the default during reload_up() when the firmware is reset. It is
therefore possible to end up in situations where the driver thinks that
the parsing depth was increased (reference count is non-zero), when it
is not.
Fix by making sure that all the consumers that increase the parsing
depth reference count also decrease it during reload_down().
Specifically, make sure that when the routing code is de-initialized it
drops the reference count if it was increased because of a FIB multipath
hash policy that requires hashing on inner fields.
Add a warning if the reference count is not zero after the driver was
de-initialized and explicitly reset it to zero during initialization for
good measures.
Fixes: 2d91f0803b ("mlxsw: spectrum: Add infrastructure for parsing configuration")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/9c35e1b3e6c1d8f319a2449d14e2b86373f3b3ba.1678727526.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bug influences both st_nci_i2c_remove and st_nci_spi_remove.
Take st_nci_i2c_remove as an example.
In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work
with llt_ndlc_sm_work.
When it calls ndlc_recv or timeout handler, it will finally call
schedule_work to start the work.
When we call st_nci_i2c_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in ndlc_remove
CPU0 CPU1
|llt_ndlc_sm_work
st_nci_i2c_remove |
ndlc_remove |
st_nci_remove |
nci_free_device|
kfree(ndev) |
//free ndlc->ndev |
|llt_ndlc_rcv_queue
|nci_recv_frame
|//use ndlc->ndev
Fixes: 35630df68d ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks if (IPv4, IPv6) address pair properly conflict or not.
* IPv4
* 0.0.0.0
* 127.0.0.1
* IPv6
* ::
* ::1
If the IPv6 address is [::], the second bind() always fails.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Holzinger reported [0] that commit 5456262d2b ("net: Fix
incorrect address comparison when searching for a bind2 bucket")
introduced a bind() regression. Paul also gave a nice repro that
calls two types of bind() on the same port, both of which now
succeed, but the second call should fail:
bind(fd1, ::, port) + bind(fd2, 127.0.0.1, port)
The cited commit added address family tests in three functions to
fix the uninit-value KMSAN report. [1] However, the test added to
inet_bind2_bucket_match_addr_any() removed a necessary conflict
check; the dual-stack wildcard address no longer conflicts with
an IPv4 non-wildcard address.
If tb->family is AF_INET6 and sk->sk_family is AF_INET in
inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the dual-stack wildcard address.
Note that the IPv4 wildcard address does not conflict with
IPv6 non-wildcard addresses.
[0]: https://lore.kernel.org/netdev/e21bf153-80b0-9ec0-15ba-e04a4ad42c34@redhat.com/
[1]: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/
Fixes: 5456262d2b ("net: Fix incorrect address comparison when searching for a bind2 bucket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paul Holzinger <pholzing@redhat.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If genphy_read_status fails then further access to the PHY may result
in unpredictable behavior. To prevent this bail out immediately if
genphy_read_status fails.
Fixes: 4223dbffed ("net: phy: smsc: Re-enable EDPD mode for LAN87xx")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality. This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context. This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.
Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.
Cc: stable@vger.kernel.org # 6.1.x
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/
Fixes: 5cb1ebdbc4 ("ice: Fix race condition during interface enslave")
Fixes: 4eace75e08 ("RDMA/irdma: Report the correct link speed")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dh_listpackages to get a list of all binary packages.
With this, debian/control lists which binary packages will be produced.
Previously, ARCH=um listed linux-libc-dev in debian/control, but it
was not generated because each of mkdebian and builddeb independently
maintained the if-conditionals.
Another motivation is to allow scripts/package/builddeb to get the
package name (linux-image-*, etc.) dynamically from debian/control.
This will also allow the BuildProfile to control the generation of
the binary packages.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 3ab18a625c ("kbuild: deb-pkg: improve the usability of source
package") set needless CROSS_COMPILE.
For example, 'make allnoconfig bindeb-pkg' on a x86_64 system will set
CROSS_COMPILE=i686-linux-gnu-, where the biarch compiler 'gcc' should
work for building the i386 kernel.
$ uname -m
x86_64
$ make allnoconfig bindeb-pkg >/dev/null
dpkg-architecture: warning: specified GNU system type i686-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
dpkg-source --before-build .
debian/rules binary
scripts/Kconfig.include:39: C compiler 'i686-linux-gnu-gcc' not found
make[6]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1
make[5]: *** [Makefile:693: olddefconfig] Error 2
make[4]: *** [Makefile:358: __build_one_by_one] Error 2
make[3]: *** [debian/rules:7: build-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[2]: *** [scripts/Makefile.package:127: bindeb-pkg] Error 2
make[1]: *** [Makefile:1657: bindeb-pkg] Error 2
make: *** [Makefile:358: __build_one_by_one] Error 2
Check whether CROSS_COMPILE is defined, instead of whether it is non-empty.
If you invoke debian/rules via Kbuild, CROSS_COMPILE is always defined
in the top Makefile.
Fixes: 3ab18a625c ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
KERNELRELEASE does not need to match the package version in changelog.
Rather, it conventially matches what is called 'ABINAME', which is a
part of the binary package names.
Both are the same by default, but the former might be overridden by
KDEB_PKGVERSION. In this case, the resulting package would not boot
because /lib/modules/$(uname -r) does not point the module directory.
Partially revert 3ab18a625c ("kbuild: deb-pkg: improve the usability
of source package").
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: 3ab18a625c ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Since commit c5bf2efb05 ("kbuild: deb-pkg: fix binary-arch and clean
in debian/rules"), the source package generated by 'make deb-pkg' fails
to build.
I terribly missed the fact that the intdeb-pkg target may regenerate
include/config/kernel.release due to the following in the top Makefile:
%pkg: include/config/kernel.release FORCE
Restore KERNELRELEASE= option to avoid the kernel.release disagreement
between build-arch and binary-arch.
Fixes: c5bf2efb05 ("kbuild: deb-pkg: fix binary-arch and clean in debian/rules")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
That commit required the use of filechk_kernel.release for the
kernelrelease Makefile target. It is currently only being set when
KBUILD_EXTMOD is not set. Make sure it is set in that case as well.
Fixes: 1cb86b6c31 ("kbuild: save overridden KERNELRELEASE in include/config/kernel.release")
Signed-off-by: Tzafrir Cohen <nvidia@cohens.org.il>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use DFS root session whenever possible to get new DFS referrals
otherwise we might end up with an IPC tcon (tcon->ses->tcon_ipc) that
doesn't respond to them. It should be safe accessing
@ses->dfs_root_ses directly in cifs_inval_name_dfs_link_error() as it
has same lifetime as of @tcon.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
Return the DFS root session id in /proc/fs/cifs/DebugData to make it
easier to track which IPC tcon was used to get new DFS referrals for a
specific connection, and aids in debugging.
A simple output of it would be
Sessions:
1) Address: 192.168.1.13 Uses: 1 Capability: 0x300067 Session Status: 1
Security type: RawNTLMSSP SessionId: 0xd80000000009
User: 0 Cred User: 0
DFS root session id: 0x128006c000035
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
The getaffinity() system call uses 'cpumask_size()' to decide how big
the CPU mask is - so far so good. It is indeed the allocation size of a
cpumask.
But the code also assumes that the whole allocation is initialized
without actually doing so itself. That's wrong, because we might have
fixed-size allocations (making copying and clearing more efficient), but
not all of it is then necessarily used if 'nr_cpu_ids' is smaller.
Having checked other users of 'cpumask_size()', they all seem to be ok,
either using it purely for the allocation size, or explicitly zeroing
the cpumask before using the size in bytes to copy it.
See for example the ublk_ctrl_get_queue_affinity() function that uses
the proper 'zalloc_cpumask_var()' to make sure that the whole mask is
cleared, whether the storage is on the stack or if it was an external
allocation.
Fix this by just zeroing the allocation before using it. Do the same
for the compat version of sched_getaffinity(), which had the same logic.
Also, for consistency, make sched_getaffinity() use 'cpumask_bits()' to
access the bits. For a cpumask_var_t, it ends up being a pointer to the
same data either way, but it's just a good idea to treat it like you
would a 'cpumask_t'. The compat case already did that.
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/lkml/7d026744-6bd6-6827-0471-b5e8eae0be3f@arm.com/
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since RISC-V supports ioremap() with huge page (pud/pmd) mapping,
However, vmalloc_fault() assumes that the vmalloc range is limited
to pte mappings. To complete the vmalloc_fault() function by adding
huge page support.
Fixes: 310f541a02 ("riscv: Enable HAVE_ARCH_HUGE_VMAP for 64BIT")
Cc: stable@vger.kernel.org
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230310075021.3919290-1-dylan@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Set the DFS root session pointer earlier when creating a new SMB
session to prevent racing with smb2_reconnect(), cifs_reconnect_tcon()
and DFS cache refresher.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
When adapter is not found, pi->disconnect() is called without previous
pi->connect(). This results in error like this:
parport0: pata_parport tried to release parport when not owner
Add missing out_disconnect label and use it correctly.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The 'q' parameter of the macro __blk_mq_run_dispatch_ops may not be one
local variable, such as, it is rq->q, then request queue pointed by
this variable could be changed to another queue in case of
BLK_MQ_F_TAG_QUEUE_SHARED after 'dispatch_ops' returns, then
'bad unlock balance' is triggered.
Fixes the issue by adding one local variable for doing srcu lock/unlock.
Fixes: 2a904d0085 ("blk-mq: remove hctx_lock and hctx_unlock")
Cc: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230310010913.1014789-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
do_req_filebacked() calls blk_mq_complete_request() synchronously or
asynchronously when using asynchronous I/O unless memory allocation fails.
Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor
'rq' after do_req_filebacked() finished unless we are sure that the request
has not yet been completed. This patch fixes the following kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054
Call trace:
css_put.42938+0x1c/0x1ac
loop_process_work+0xc8c/0xfd4
loop_rootcg_workfn+0x24/0x34
process_one_work+0x244/0x558
worker_thread+0x400/0x8fc
kthread+0x16c/0x1e0
ret_from_fork+0x10/0x20
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Fixes: c74d40e8b5 ("loop: charge i/o to mem and blk cg")
Fixes: bc07c10a36 ("block: loop: support DIO & AIO")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
post-6.2 issues or aren't considered suitable for backporting. Seven of
these fixes are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZBEItgAKCRDdBJ7gKXxA
jsF/AP0ToKnDwmZ1SJOGK3pFiVGVy7VSaq1THrnLQoC57l8jTAD+PReSZMNXaxhB
8701hVQcxKAiu9wAvowSd+lOvpwHMwQ=
=IANU
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-03-14-16-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Eleven hotfixes.
Four of these are cc:stable and the remainder address post-6.2 issues
or aren't considered suitable for backporting.
Seven of these fixes are for MM"
* tag 'mm-hotfixes-stable-2023-03-14-16-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/paddr: fix folio_nr_pages() after folio_put() in damon_pa_mark_accessed_or_deactivate()
mm/damon/paddr: fix folio_size() call after folio_put() in damon_pa_young()
ocfs2: fix data corruption after failed write
migrate_pages: try migrate in batch asynchronously firstly
migrate_pages: move split folios processing out of migrate_pages_batch()
migrate_pages: fix deadlock in batched migration
.mailmap: add Alexandre Ghiti personal email address
mailmap: correct Dikshita Agarwal's Qualcomm email address
mailmap: updates for Jarkko Sakkinen
mm/userfaultfd: propagate uffd-wp bit when PTE-mapping the huge zeropage
mm: teach mincore_hugetlb about pte markers
- Do not allow histogram values to have modifies.
Can cause a NULL pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL.
Prevent the NULL pointer dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBDuTBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsboAP4yfrFYvIIKM5EkzkEiPI+V2hdlA12x
bt839jO5AWCmhAEAiY8FmKatpBJQKsiGqSOab8aHOMnhGFZwltCHAPa9PAI=
=vtA2
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow histogram values to have modifies. They can cause a NULL
pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make tracepoint lockdep check actually test something
ftrace,kcfi: Define ftrace_stub_graph conditionally
ftrace: Fix invalid address access in lookup_rec() when index is 0
tracing: Check field value in hist_field_name()
tracing: Do not let histogram values have some modifiers
A small number of fixes for zstd-v1.5.2.
I'm not pulling in zstd-v1.5.4 from upstream this release because it
didn't have any time to bake in linux-next, but I'm aiming for the next
update in v6.4.
I've rebased my tree onto v6.2 to remove the incorrect back merges as
suggested by Linus in my initial PR for v6.3 [0].
[0] https://lore.kernel.org/lkml/C8C4DFDA-998F-48AD-93C9-DE16F8080A02@meta.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
-----BEGIN PGP SIGNATURE-----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=1tCu
-----END PGP SIGNATURE-----
Merge tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux
Pull zstd fixes from Nick Terrell:
"A small number of fixes for zstd-v1.5.2.
I'm not pulling in zstd-v1.5.4 from upstream this release because it
didn't have any time to bake in linux-next, but I'm aiming for the
next update in v6.4"
* tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux:
zstd: Fix definition of assert()
lib: zstd: Backport fix for in-place decompression
lib: zstd: Fix -Wstringop-overflow warning
regressions seen in the last few weeks. The fwnode patch broke the build
for one driver that isn't always compiled, so I waited over the weekend
to be certain no more build issues came up.
[Note: I'm looking at the module license patches in here after gregkh
questioned them on the list. They're coming into my inbox in dribbles,
and I thought they were necessary to fix some build issue but that
doesn't seem to be the case so I stopped applying any more. They're
still potentially useful because it slightly speeds up builds if we
don't need to include module.h for module macros. If you're flat out
opposed I'll rewind this branch and send a new pull request. Please let
me know.]
- Mark the firmware node (fwnode) that matches the compatible in
CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
after fw_devlink stopped checking parent nodes in
of_link_to_phandle()
- Remove a couple MODULE_LICENSE macros in non-modules
- Update the maintainers file for Microchip clk drivers
- Select instead of depend on the REGMAP config to fix Kconfig issues
- Use div_u64() for portable 64-bit division in K210 clk driver
-----BEGIN PGP SIGNATURE-----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=EGt2
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of clk driver fixes, and a couple OF clk patches to fix
regressions seen in the last few weeks. The fwnode patch broke the
build for one driver that isn't always compiled, so I waited over the
weekend to be certain no more build issues came up.
- Mark the firmware node (fwnode) that matches the compatible in
CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
after fw_devlink stopped checking parent nodes in
of_link_to_phandle()
- Remove a couple MODULE_LICENSE macros in non-modules
- Update the maintainers file for Microchip clk drivers
- Use 'select' instead of 'depend on' for the REGMAP config to fix
Kconfig issues
- Use div_u64() for portable 64-bit division in K210 clk driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Avoid invalid function names in CLK_OF_DECLARE()
clk: k210: remove an implicit 64-bit division
MAINTAINERS: add missing clock driver coverage for Microchip FPGAs
clk: HI655X: select REGMAP instead of depending on it
kbuild, clk: remove MODULE_LICENSE in non-modules
kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modules
clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro
WQ_UNBOUND causes significant scheduler latency on ARM64/Android. This
is problematic for latency sensitive workloads, like I/O
post-processing.
Removing WQ_UNBOUND gives a 96% reduction in fsverity workqueue related
scheduler latency and improves app cold startup times by ~30ms.
WQ_UNBOUND was also removed from the dm-verity workqueue for the same
reason [1].
This code was tested by running Android app startup benchmarks and
measuring how long the fsverity workqueue spent in the runnable state.
Before
Total workqueue scheduler latency: 553800us
After
Total workqueue scheduler latency: 18962us
[1]: https://lore.kernel.org/all/20230202012348.885402-1-nhuck@google.com/
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 8a1d0f9cac ("fs-verity: add data verification hooks for ->readpages()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230310193325.620493-1-nhuck@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Before my changes to how multichannel reconnects work, the
primary channel was always used to do a non-binding session
setup. With my changes, that is not the case anymore.
Missed this place where channel at index 0 was forcibly
updated with the signing key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
If cifs_get_writable_path() finds a writable file, smb2_compound_op()
must use that file's FID and not the COMPOUND_FID.
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A while ago where the trace events had the following:
rcu_read_lock_sched_notrace();
rcu_dereference_sched(...);
rcu_read_unlock_sched_notrace();
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The user provides arbitrary non-numeic value to level and type,
which could bring unexpected behavior. In this case the expected
behavior would be to throw an error.
pfrut -h
usage: pfrut [OPTIONS]
code injection:
-l, --load
-s, --stage
-a, --activate
-u, --update [stage and activate]
-q, --query
-d, --revid
update telemetry:
-G, --getloginfo
-T, --type(0:execution, 1:history)
-L, --level(0, 1, 2, 4)
-R, --read
-D, --revid log
pfrut -T A
pfrut -G
log_level:0
log_type:0
log_revid:2
max_data_size:65536
chunk1_size:0
chunk2_size:1530
rollover_cnt:0
reset_cnt:17
Fix this by restricting the input to be in the expected range.
Reported-by: Hariganesh Govindarajulu <hariganesh.govindarajulu@intel.com>
Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 0c80f9e165 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
enabled to map PPTT once on the first invocation of acpi_get_pptt() and
never unmapped the same allowing it to be used at runtime with out the
hassle of mapping and unmapping the table. This was needed to fetch LLC
information from the PPTT in the cpuhotplug path which is executed in
the atomic context as the acpi_get_table() might sleep waiting for a
mutex.
However it missed to handle the case when there is no PPTT on the system
which results in acpi_get_pptt() being called from all the secondary
CPUs attempting to fetch the LLC information in the atomic context
without knowing the absence of PPTT resulting in the splat like below:
| BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by swapper/1/0.
| irq event stamp: 0
| hardirqs last enabled at (0): 0x0
| hardirqs last disabled at (0): copy_process+0x61c/0x1b40
| softirqs last enabled at (0): copy_process+0x61c/0x1b40
| softirqs last disabled at (0): 0x0
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1
| Call trace:
| dump_backtrace+0xac/0x138
| show_stack+0x30/0x48
| dump_stack_lvl+0x60/0xb0
| dump_stack+0x18/0x28
| __might_resched+0x160/0x270
| __might_sleep+0x58/0xb0
| down_timeout+0x34/0x98
| acpi_os_wait_semaphore+0x7c/0xc0
| acpi_ut_acquire_mutex+0x58/0x108
| acpi_get_table+0x40/0xe8
| acpi_get_pptt+0x48/0xa0
| acpi_get_cache_info+0x38/0x140
| init_cache_level+0xf4/0x118
| detect_cache_attributes+0x2e4/0x640
| update_siblings_masks+0x3c/0x330
| store_cpu_topology+0x88/0xf0
| secondary_start_kernel+0xd0/0x168
| __secondary_switched+0xb8/0xc0
Update acpi_get_pptt() to consider the fact that PPTT is once checked and
is not available on the system and return NULL avoiding any attempts to
fetch PPTT and thereby avoiding any possible sleep waiting for a mutex
in the atomic context.
Fixes: 0c80f9e165 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the user's login time is newer than the cache's timestamp,
the original entry in the RB-tree will be replaced by a new entry.
Currently, the timestamp is only set if the entry is not found in
the RB-tree, which can cause the timestamp to be undefined when
the entry exists. This may result in a significant increase in
ACCESS operations if the timestamp is set to zero.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Fixes: 0eb43812c0 ("NFS: Clear the file access cache upon login”)
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmQQsDcPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y0IgH/3xU4J6oeGF9bWsQV9iA1510I/PiRrcAX4Bs
KnE62yzV/Q+Lun84l/kEl0Uqgd+VF80WYdBX1vlO6PX0czo6muSSrBXfz7ZMu8eF
JxVm7IkHYeVMOnaL8R1Y76peIMosVLVMt0I4pmzC65GvxPYaHzBioZfvUxM75R3/
kQeWdUQdxOA3TZxM3GFDyzSomSl5sHkujYDWWWjxQnEH2Z8wgMxVvSFOBNmPGiMr
q7TOqOV2psd5XwIL/1aZPssXPQuubwRV80Ft1M5l5B1lG9XvecX1Je/Io0dqv7hK
bp/Rt8qysKJ6afHGoW+K/jo2SCCEgdtWfYzucQAyVLk5Ayy+gZo=
=btlI
-----END PGP SIGNATURE-----
Merge tag 'docs-6.3-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of fixes and minor documentation updates"
* tag 'docs-6.3-fixes' of git://git.lwn.net/linux:
docs: vfio: fix header path
docs: process: typo fix
docs/mm: hugetlbfs_reserv: fix a reference to a file that doesn't exist
docs/mm: Physical Memory: fix a reference to a file that doesn't exist
docs: rebasing-and-merging: Drop wrong statement about git
docs: programming-language: add Rust programming language section
docs: programming-language: remove mention of the Intel compiler
docs: Correct missing "d_" prefix for dentry_operations member d_weak_revalidate
sched/doc: supplement CPU capacity with RISC-V
Commit 6930bcbfb6 dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.
Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.
Fixes: 6930bcbfb6 ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A regression has occurred in the hid-sensor code where a device
name string has not been initialized to 0, and ends up without
a NULL char and is printed with %s. This includes random binary
data in the device name, which makes its way into the ftrace output
and ends up crashing sleepgraph because it expects the ftrace output
to be ASCII only.
For example: "HID-SENSOR-INT-020b?.39.auto" ends up in ftrace instead
of "HID-SENSOR-INT-020b.39.auto". It causes this crash in sleepgraph:
File "/usr/bin/sleepgraph", line 5579, in executeSuspend
for line in fp:
File "/usr/lib/python3.10/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xff in position
1568: invalid start byte
The issue is present in 6.3-rc1 and is described in full here:
https://bugzilla.kernel.org/show_bug.cgi?id=217169
A separate fix has been submitted to have this issue repaired, but
it has also exposed a larger bug in sleepgraph, since nothing should
make sleepgraph crash. Sleepgraph needs to be able to handle binary
data showing up in ftrace gracefully.
Modify the ftrace processing code to treat it as potentially binary
and to filter out binary data and leave just the ASCII.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217169
Fixes: 98c062e824 ("HID: hid-sensor-custom: Allow more custom iio sensors")
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 21a3e6eed4 ("ARM: omap1: remove osk-mistral add-on board
support") removed the platform_device definition for the "lcd_osk"
device, so this driver is now unused and can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
According to commit 7945f929f1 ("drivers: provide
devm_platform_ioremap_resource()"), convert platform_get_resource(),
devm_ioremap_resource() to a single call to Use
devm_platform_ioremap_resource(), as this is exactly what this function
does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single call to
devm_platform_get_and_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fb_set_var would by called when user invokes ioctl with cmd
FBIOPUT_VSCREENINFO. User-provided data would finally reach
tgafb_check_var. In case var->pixclock is assigned to zero,
divide by zero would occur when checking whether reciprocal
of var->pixclock is too high.
Similar crashes have happened in other fbdev drivers. There
is no check and modification on var->pixclock along the call
chain to tgafb_check_var. We believe it could also be triggered
in driver tgafb from user site.
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This was triggered by the fact that the webpage:
http://www.winischhofer.net/linuxsisvga.shtml
cannot be reached anymore.
Thomas Winischhofer is still reachable at the given email address, but he
has not been active since 2005.
Mark the SIS FRAMEBUFFER DRIVER as orphan to reflect the current state.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
This cleans up the indentation according to the Linux kernel coding
style, and should fix the warning created by the kernel test robot.
Fixes: 8b08cf2b64 ("OMAP: add TI OMAP framebuffer driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lucy Mielke <mielkesteven@icloud.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Prior to commit 8786fde842 ("Convert NFS from readpages to
readahead"), nfs_readpages() used the old mm interface read_cache_pages()
which called task_io_account_read() for each NFS page read. After
this commit, nfs_readpages() is converted to nfs_readahead(), which
now uses the new mm interface readahead_page(). The new interface
requires callers to call task_io_account_read() themselves.
In addition, to nfs_readahead() task_io_account_read() should also
be called from nfs_read_folio().
Fixes: 8786fde842 ("Convert NFS from readpages to readahead")
Link: https://lore.kernel.org/linux-nfs/CAPt2mGNEYUk5u8V4abe=5MM5msZqmvzCVrtCP4Qw1n=gCHCnww@mail.gmail.com/
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>