Check that the PREFUSH and FUA flags are only set on write bios,
given that the flush state machine expects that.
[Damien] The check is also extended to REQ_OP_ZONE_APPEND operations as
these are data write operations used by btrfs and zonefs and may also
have the REQ_FUA bit set.
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
This is more efficient than iter_iov.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in iovec assumption fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan reports the following smatch detected the following:
block/blk-cgroup.c:1863 blkcg_schedule_throttle() warn: sleeping in atomic context
caused by blkcg_schedule_throttle() calling blk_put_queue() in an
non-sleepable context.
blk_put_queue() acquired might_sleep() in 63f93fd6fa ("block: mark
blk_put_queue as potentially blocking") which transferred the might_sleep()
from blk_free_queue().
blk_free_queue() acquired might_sleep() in e8c7d14ac6 ("block: revert back
to synchronous request_queue removal") while turning request_queue removal
synchronous. However, this isn't necessary as nothing in the free path
actually requires sleeping.
It's pretty unusual to require a sleeping context in a put operation and
it's not needed in the first place. Let's drop it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lkml.kernel.org/r/Y7g3L6fntnTtOm63@kili
Cc: Christoph Hellwig <hch@lst.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Fixes: e8c7d14ac6 ("block: revert back to synchronous request_queue removal") # v5.9+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Y7iFwjN+XzWvLv3y@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=LJ5Q
-----END PGP SIGNATURE-----
Merge tag 'block-2023-01-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we split a bio marked with REQ_NOWAIT, then we can trigger spurious
EAGAIN if constituent parts of that split bio end up failing request
allocations. Parts will complete just fine, but just a single failure
in one of the chained bios will yield an EAGAIN final result for the
parent bio.
Return EAGAIN early if we end up needing to split such a bio, which
allows for saner recovery handling.
Cc: stable@vger.kernel.org # 5.15+
Link: https://github.com/axboe/liburing/issues/766
Reported-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=cqhz
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
Commit 64dc8c732f ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().
Fixes: 64dc8c732f ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221226030605.1437081-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=TSec
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Various fixes for BFQ (Yu, Yuwei)
- Fix for loop command line parsing (Isaac)
- No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade
anymore (me)
- blk-iocost enum fix for newer gcc (Jiri)
- UAF fix for queue release (Ming)
- blk-iolatency error handling memory leak fix (Tejun)
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
For blk-mq, queue release handler is usually called after
blk_mq_freeze_queue_wait() returns. However, the
q_usage_counter->release() handler may not be run yet at that time, so
this can cause a use-after-free.
Fix the issue by moving percpu_ref_exit() into blk_free_queue_rcu().
Since ->release() is called with rcu read lock held, it is agreed that
the race should be covered in caller per discussion from the two links.
Reported-by: Zhang Wensheng <zhangwensheng@huaweicloud.com>
Reported-by: Zhong Jinghua <zhongjinghua@huawei.com>
Link: https://lore.kernel.org/linux-block/Y5prfOjyyjQKUrtH@T590/T/#u
Link: https://lore.kernel.org/lkml/Y4%2FmzMd4evRg9yDi@fedora/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Dennis Zhou <dennis@kernel.org>
Fixes: 2b0d3d3e4f ("percpu_ref: reduce memory footprint of percpu_ref in fast path")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221215021629.74870-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'bfqd->num_groups_with_pending_reqs' is used when
CONFIG_BFQ_GROUP_IOSCHED is enabled, so let the variables and processes
take effect when CONFIG_BFQ_GROUP_IOSCHED is enabled.
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yuwei Guan <Yuwei.Guan@zeekrlife.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221110112622.389332-1-Yuwei.Guan@zeekrlife.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a gendisk is successfully initialized but add_disk() fails such as when
a loop device has invalid number of minor device numbers specified,
blkcg_init_disk() is called during init and then blkcg_exit_disk() during
error handling. Unfortunately, iolatency gets initialized in the former but
doesn't get cleaned up in the latter.
This is because, in non-error cases, the cleanup is performed by
del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos
policies, iolatency being one of them, can only be activated once the disk
is fully registered and visible. That assumption is true for wbt and iocost,
but not so for iolatency as it gets initialized before add_disk() is called.
It is desirable to lazy-init rq_qos policies because they are optional
features and add to hot path overhead once initialized - each IO has to walk
all the registered rq_qos policies. So, we want to switch iolatency to lazy
init too. However, that's a bigger change. As a fix for the immediate
problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk().
This is safe because duplicate calls to rq_qos_exit() become noop's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: darklight2357@icloud.com
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: d706751215 ("block: introduce blk-iolatency io controller")
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Y5TQ5gm3O4HXrXR3@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided:
VTIME_PER_SEC_SHIFT = 37,
VTIME_PER_SEC = 1LLU << VTIME_PER_SEC_SHIFT,
...
AUTOP_CYCLE_NSEC = 10LLU * NSEC_PER_SEC,
the named type is unsigned long.
This generates warnings with gcc-13:
block/blk-iocost.c: In function 'ioc_weight_prfill':
block/blk-iocost.c:3037:37: error: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int'
block/blk-iocost.c: In function 'ioc_weight_show':
block/blk-iocost.c:3047:34: error: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int'
So split the anonymous enum with large values to a separate enum, so
that they don't affect other members.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Cc: Martin Liska <mliska@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: cgroups@vger.kernel.org
Cc: linux-block@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221213120826.17446-1-jirislaby@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c6 ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic.
Fixes: 3bc5e683c6 ("bfq: Split shared queues on move between cgroups")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221214030430.3304151-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
This release adds SM4 encryption support, contributed by Tianjia Zhang.
SM4 is a Chinese block cipher that is an alternative to AES.
I recommend against using SM4, but (according to Tianjia) some people
are being required to use it. Since SM4 has been turning up in many
other places (crypto API, wireless, TLS, OpenSSL, ARMv8 CPUs, etc.), it
hasn't been very controversial, and some people have to use it, I don't
think it would be fair for me to reject this optional feature.
Besides the above, there are a couple cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY5auyBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK1u4AP4lhLxaEJ9upkHZrPAvEdF7QjLhO/ju
h1LrvWHcEbvr6AEA/8ptc5RA1BAoSTDcqIWxIAWRztvptP4gUETb1b9C/ws=
=An5w
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release adds SM4 encryption support, contributed by Tianjia
Zhang. SM4 is a Chinese block cipher that is an alternative to AES.
I recommend against using SM4, but (according to Tianjia) some people
are being required to use it. Since SM4 has been turning up in many
other places (crypto API, wireless, TLS, OpenSSL, ARMv8 CPUs, etc.),
it hasn't been very controversial, and some people have to use it, I
don't think it would be fair for me to reject this optional feature.
Besides the above, there are a couple cleanups"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add additional documentation for SM4 support
fscrypt: remove unused Speck definitions
fscrypt: Add SM4 XTS/CTS symmetric algorithm support
blk-crypto: Add support for SM4-XTS blk crypto mode
fscrypt: add comment for fscrypt_valid_enc_modes_v1()
fscrypt: pass super_block to fscrypt_put_master_key_activeref()
Usually when closing a crypto device (eg: dm-crypt with LUKS) the
volume key is not required, as it requires root privileges anyway, and
root can deny access to a disk in many ways regardless. Requiring the
volume key to lock the device is a peculiarity of the OPAL
specification.
Given we might already have saved the key if the user requested it via
the 'IOC_OPAL_SAVE' ioctl, we can use that key to lock the device if no
key was provided here and the locking range matches, and the user sets
the appropriate flag with 'IOC_OPAL_SAVE'. This allows integrating OPAL
with tools and libraries that are used to the common behaviour and do
not ask for the volume key when closing a device.
Callers can always pass a non-zero key and it will be used regardless,
as before.
Suggested-by: Štěpán Horáček <stepan.horacek@gmail.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20221206092913.4625-1-luca.boccassi@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the pktcdvdv removal, bio_copy_data_iter is unused now. Fold the
logic into bio_copy_data and remove the separate lower level function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221206144407.722049-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to update tg->slice_start[rw] to start when they are
equal already. So remove "eq" part of check before update slice_start.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-10-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to check elapsed time from last upgrade for each node in
hierarchy. Move this check before traversing as throtl_can_upgrade do
to remove repeat check.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-9-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function tg_last_low_overflow_time is called with intermediate node as
following:
throtl_hierarchy_can_downgrade
throtl_tg_can_downgrade
tg_last_low_overflow_time
throtl_hierarchy_can_upgrade
throtl_tg_can_upgrade
tg_last_low_overflow_time
throtl_hierarchy_can_downgrade/throtl_hierarchy_can_upgrade will traverse
from leaf node to sub-root node and pass traversed intermediate node
to tg_last_low_overflow_time.
No such limit could be found from context and implementation of
tg_last_low_overflow_time, so remove this limit in comment.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-8-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c79892c557 ("blk-throttle: add upgrade logic for LIMIT_LOW
state") added upgrade logic for low limit and methioned that
1. "To determine if a cgroup exceeds its limitation, we check if the cgroup
has pending request. Since cgroup is throttled according to the limit,
pending request means the cgroup reaches the limit."
2. "If a cgroup has limit set for both read and write, we consider the
combination of them for upgrade. The reason is read IO and write IO can
interfere with each other. If we do the upgrade based in one direction IO,
the other direction IO could be severly harmed."
Besides, we also determine that cgroup reaches low limit if low limit is 0,
see comment in throtl_tg_can_upgrade.
Collect the information above, the desgin of upgrade check is as following:
1.The low limit is reached if limit is zero or io is already queued.
2.Cgroup will pass upgrade check if low limits of READ and WRITE are both
reached.
Simpfy the check code described above to removce repeat check and improve
readability. There is no functional change.
Detail equivalence proof is as following:
All replaced conditions to return true are as following:
condition 1
(!read_limit && !write_limit)
condition 2
read_limit && sq->nr_queued[READ] &&
(!write_limit || sq->nr_queued[WRITE])
condition 3
write_limit && sq->nr_queued[WRITE] &&
(!read_limit || sq->nr_queued[READ])
Transferring condition 2 as following:
(read_limit && sq->nr_queued[READ]) &&
(!write_limit || sq->nr_queued[WRITE])
is equivalent to
(read_limit && sq->nr_queued[READ]) &&
(!write_limit || (write_limit && sq->nr_queued[WRITE]))
is equivalent to
condition 2.1
(read_limit && sq->nr_queued[READ] &&
!write_limit) ||
condition 2.2
(read_limit && sq->nr_queued[READ] &&
(write_limit && sq->nr_queued[WRITE]))
Transferring condition 3 as following:
write_limit && sq->nr_queued[WRITE] &&
(!read_limit || sq->nr_queued[READ])
is equivalent to
(write_limit && sq->nr_queued[WRITE]) &&
(!read_limit || (read_limit && sq->nr_queued[READ]))
is equivalent to
condition 3.1
((write_limit && sq->nr_queued[WRITE]) &&
!read_limit) ||
condition 3.2
((write_limit && sq->nr_queued[WRITE]) &&
(read_limit && sq->nr_queued[READ]))
Condition 3.2 is the same as condition 2.2, so all conditions we get to
return are as following:
(!read_limit && !write_limit) (1)
(!read_limit && (write_limit && sq->nr_queued[WRITE])) (3.1)
((read_limit && sq->nr_queued[READ]) && !write_limit) (2.1)
((write_limit && sq->nr_queued[WRITE]) &&
(read_limit && sq->nr_queued[READ])) (2.2)
As we can extract conditions "(a1 || a2) && (b1 || b2)" to:
a1 && b1
a1 && b2
a2 && b1
ab && b2
Considering that:
a1 = !read_limit
a2 = read_limit && sq->nr_queued[READ]
b1 = !write_limit
b2 = write_limit && sq->nr_queued[WRITE]
We can pack replaced conditions to
(!read_limit || (read_limit && sq->nr_queued[READ])) &&
(!write_limit || (write_limit && sq->nr_queued[WRITE]))
which is equivalent to
(!read_limit || sq->nr_queued[READ]) &&
(!write_limit || sq->nr_queued[WRITE])
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In C language, When executing "if (expression1 && expression2)" and
expression1 return false, the expression2 may not be executed.
For "tg_within_bps_limit(tg, bio, bps_limit, &bps_wait) &&
tg_within_iops_limit(tg, bio, iops_limit, &iops_wait))", if bps is
limited, tg_within_bps_limit will return false and
tg_within_iops_limit will not be called. So even bps and iops are
both limited, iops_wait will not be calculated and is always zero.
So wait time of iops is always ignored.
Fix this by always calling tg_within_bps_limit and tg_within_iops_limit
to get wait time for both bps and iops.
Observed that:
1. Wait time in tg_within_iops_limit/tg_within_bps_limit need always
be stored as wait argument is always passed.
2. wait time is stored to zero if iops/bps is limited otherwise non-zero
is stored.
Simpfy tg_within_iops_limit/tg_within_bps_limit by removing wait argument
and return wait time directly. Caller tg_may_dispatch checks if wait time
is zero to find if iops/bps is limited.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-5-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ignore cgroup without io queued in blk_throtl_cancel_bios for two
reasons:
1. Save cpu cycle for trying to dispatch cgroup which is no io queued.
2. Avoid non-consistent state that cgroup is inserted to service queue
without THROTL_TG_PENDING set as tg_update_disptime will unconditional
re-insert cgroup to service queue. If we are on the default hierarchy,
IO dispatched from child in tg_dispatch_one_bio will trigger inserting
cgroup to service queue without erase first and ruin the tree.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-4-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider situation as following (on the default hierarchy):
HDD
|
root (bps limit: 4k)
|
child (bps limit :8k)
|
fio bs=8k
Rate of fio is supposed to be 4k, but result is 8k. Reason is as
following:
Size of single IO from fio is larger than bytes allowed in one
throtl_slice in child, so IOs are always queued in child group first.
When queued IOs in child are dispatched to parent group, BIO_BPS_THROTTLED
is set and these IOs will not be limited by tg_within_bps_limit anymore.
Fix this by only set BIO_BPS_THROTTLED when the bio traversed the entire
tree.
There patch has no influence on situation which is not on the default
hierarchy as each group is a single root group without parent.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On the default hierarchy (cgroup2), the throttle interface files don't
exist in the root cgroup, so the ablity to limit the whole system
by configuring root group is not existing anymore. In general, cgroup
doesn't wanna be in the business of restricting resources at the
system level, so correct the stale comment that we can limit whole
system to we can only limit subtree.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-2-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the removal of the pktcdvd driver, there are no in-kernel users of
the devnode callback in struct block_device_operations, so it can be
safely removed. If it is needed for new block drivers in the future, it
can be brought back.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221203140747.1942969-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the description of @gendisk to @disk in blkcg_schedule_throttle()
to clear the below warnings:
block/blk-cgroup.c:1850: warning: Function parameter or member 'disk' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1850: warning: Excess function parameter 'gendisk' description in 'blkcg_schedule_throttle'
Fixes: de185b56e8 ("blk-cgroup: pass a gendisk to blkcg_schedule_throttle")
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3338
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221202011713.14834-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SM4 is a symmetric cipher algorithm widely used in China. The SM4-XTS
variant is used to encrypt length-preserving data. This is the
mandatory algorithm in some special scenarios.
Add support for the algorithm to block inline encryption. This is needed
for the inlinecrypt mount option to be supported via
blk-crypto-fallback, as it is for the other fscrypt modes.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221201125819.36932-2-tianjia.zhang@linux.alibaba.com
Use only one hyphen in kernel-doc notation between the function name
and its short description.
The is the documented kerenl-doc format. It also fixes the HTML
presentation to be consistent with other functions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20221201070331.25685-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no iocg_pd_init function. The pd_alloc_fn function pointer of
iocost policy is set with ioc_pd_init. Just correct it.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-6-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we trace vtime_base_rate instead of vtime_rate, there is nowhere
which accesses now->vrate except function ioc_now using now->vrate locally.
Just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-5-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit ac33e91e2d ("blk-iocost: implement vtime loss
compensation") rename original vtime_rate to vtime_base_rate
and current vtime_rate is original vtime_rate with compensation.
The current rate showed in tracepoint is mixed with vtime_rate
and vtime_base_rate:
1) In function ioc_adjust_base_vrate, the first trace_iocost_ioc_vrate_adj
shows vtime_rate, the second trace_iocost_ioc_vrate_adj shows
vtime_base_rate.
2) In function iocg_activate shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_activate...
3) In function ioc_check_iocgs shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_idle...
Trace vtime_base_rate instead of vtime_rate as:
1) Before commit ac33e91e2d ("blk-iocost: implement vtime loss
compensation"), the traced rate is without compensation, so still
show rate without compensation.
2) The vtime_base_rate is more stable while vtime_rate heavily depends on
excess budeget on current period which may change abruptly in next period.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-4-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit ac33e91e2daca("blk-iocost: implement vtime loss compensation")
split vtime_rate into vtime_rate and vtime_base_rate, we need reset both
vtime_base_rate and vtime_rate when device parameters are refreshed.
If vtime_base_rate is no reset here, vtime_rate will be overwritten with
old vtime_base_rate soon in ioc_refresh_vrate.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-3-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 10c70d95c0 ("block: remove the bd_openers checks in
blk_drop_partitions") we allow rereading of partition table although
there are users of the block device. This has an undesirable consequence
that e.g. if sda and sdb are assembled to a RAID1 device md0 with
partitions, BLKRRPART ioctl on sda will rescan partition table and
create sda1 device. This partition device under a raid device confuses
some programs (such as libstorage-ng used for initial partitioning for
distribution installation) leading to failures.
Fix the problem refusing to rescan partitions if there is another user
that has the block device exclusively open.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221130135344.2ul4cyfstfs3znxg@quack3
Fixes: 10c70d95c0 ("block: remove the bd_openers checks in blk_drop_partitions")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221130175653.24299-1-jack@suse.cz
[axboe: fold in followup fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't just say that the last reference release may block, as any
reference dropped could be the last one. So move the might_sleep() from
blk_free_queue to blk_put_queue and update the documentation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kobject embedded into the request_queue is used for the queue
directory in sysfs, but that is a child of the gendisks directory and is
intimately tied to it. Move this kobject to the gendisk and use a
refcount_t in the request_queue for the actual request_queue refcounting
that is completely unrelated to the device model.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_register_queue fails to handle errors from blk_mq_sysfs_register,
leaks various resources on errors and accidentally sets queue refs percpu
refcount to percpu mode on kobject_add failure. Fix all that by
properly unwinding on errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the debugfs removal from blk_unregister_queue into a helper so that
the it can be reused for blk_register_queue error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for changes to the block layer sysfs handling by passing the
readily available gendisk to blk_crypto_sysfs_{,un}register.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042637.1009333-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename deadline_is_seq_writes() to deadline_is_seq_write() (remove the
"s" plural) to more correctly reflect the fact that this function tests
a single request, not multiple requests.
Fixes: 015d02f485 ("block: mq-deadline: Do not break sequential write streams to zoned HDDs")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221126025550.967914-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=41zr
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- A few fixes for s390 sads (Stefan, Colin)
- Ensure that ublk doesn't reorder requests, as that can be problematic
on devices that need specific ordering (Ming)
- Fix a queue reference leak in disk allocation handling (Christoph)
* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
ublk_drv: don't forward io commands in reserve order
s390/dasd: fix possible buffer overflow in copy_pair_show
s390/dasd: fix no record found for raw_track_access
s390/dasd: increase printing of debug data payload
s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
The devnode() in struct class should not be modifying the device that is
passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Justin Sanders <justin@coraid.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sean Young <sean@mess.org>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: alsa-devel@alsa-project.org
Cc: dri-devel@lists.freedesktop.org
Cc: kvm@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-block@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20221123122523.1332370-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_uevent() in struct class should not be modifying the device that
is passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Raed Salem <raeds@nvidia.com>
Cc: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Avihai Horon <avihaih@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Wang Yufen <wangyufen@huawei.com>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221123122523.1332370-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mq-deadline ensures an in order dispatching of write requests to zoned
block devices using a per zone lock (a bit). This implies that for any
purely sequential write workload, the drive is exercised most of the
time at a maximum queue depth of one.
However, when such sequential write workload crosses a zone boundary
(when sequentially writing multiple contiguous zones), zone write
locking may prevent the last write to one zone to be issued (as the
previous write is still being executed) but allow the first write to the
following zone to be issued (as that zone is not yet being writen and
not locked). This result in an out of order delivery of the sequential
write commands to the device every time a zone boundary is crossed.
While such behavior does not break the sequential write constraint of
zoned block devices (and does not generate any write error), some zoned
hard-disks react badly to seeing these out of order writes, resulting in
lower write throughput.
This problem can be addressed by always dispatching the first request
of a stream of sequential write requests, regardless of the zones
targeted by these sequential writes. To do so, the function
deadline_skip_seq_writes() is introduced and used in
deadline_next_request() to select the next write command to issue if the
target device is an HDD (blk_queue_nonrot() being false).
deadline_fifo_request() is modified using the new
deadline_earlier_request() and deadline_is_seq_write() helpers to ignore
requests in the fifo list that have a preceding request in lba order
that is sequential.
With this fix, a sequential write workload executed with the following
fio command:
fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \
--size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \
--bs=65536
results in an increase from 225 MB/s to 250 MB/s of the write throughput
of an SMR HDD (11% increase).
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dd_finish_request() tests if the per prio fifo_list is not empty to
determine if request dispatching must be restarted for handling blocked
write requests to zoned devices with a call to
blk_mq_sched_mark_restart_hctx(). While simple, this implementation has
2 problems:
1) Only the priority level of the completed request is considered.
However, writes to a zone may be blocked due to other writes to the
same zone using a different priority level. While this is unlikely to
happen in practice, as writing a zone with different IO priorirites
does not make sense, nothing in the code prevents this from
happening.
2) The use of list_empty() is dangerous as dd_finish_request() does not
take dd->lock and may run concurrently with the insert and dispatch
code.
Fix these 2 problems by testing the write fifo list of all priority
levels using the new helper dd_has_write_work(), and by testing each
fifo list using list_empty_careful().
Fixes: c807ab520f ("block/mq-deadline: Add I/O priority support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow the compiler to verify consistency of function declarations and
function definitions. This patch fixes the following sparse errors:
block/blk-crypto-profile.c:241:14: error: no previous prototype for ‘blk_crypto_get_keyslot’ [-Werror=missing-prototypes]
241 | blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:318:6: error: no previous prototype for ‘blk_crypto_put_keyslot’ [-Werror=missing-prototypes]
318 | void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot)
| ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:344:6: error: no previous prototype for ‘__blk_crypto_cfg_supported’ [-Werror=missing-prototypes]
344 | bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:373:5: error: no previous prototype for ‘__blk_crypto_evict_key’ [-Werror=missing-prototypes]
373 | int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221123172923.434339-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the request queue reference just acquired when __alloc_disk_node
failed.
Fixes: 6f8191fdf4 ("block: simplify disk shutdown")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122072753.426077-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit ee9d55210c ("blk-mq: simplify blk_mq_realloc_tag_set_tags")
cleaned up the function blk_mq_realloc_tag_set_tags. After this change,
the function does not update nr_hw_queues of struct blk_mq_tag_set when
new nr_hw_queues value is smaller than original. This results in failure
of queue number change of block devices. To avoid the failure, add the
missing nr_hw_queues update.
Fixes: ee9d55210c ("blk-mq: simplify blk_mq_realloc_tag_set_tags")
Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/linux-block/20221118140640.featvt3fxktfquwh@shindev/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221122084917.2034220-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key
and __blk_crypto_cfg_supported are only used internally by the
blk-crypto code, so move the out of blk-crypto-profile.h, which is
included by drivers that supply blk-crypto functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue. With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=sOGG
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
As noted by Michal, the blkg_iostat_set's in the lockless list
hold reference to blkg's to protect against their removal. Those
blkg's hold reference to blkcg. When a cgroup is being destroyed,
cgroup_rstat_flush() is only called at css_release_work_fn() which is
called when the blkcg reference count reaches 0. This circular dependency
will prevent blkcg from being freed until some other events cause
cgroup_rstat_flush() to be called to flush out the pending blkcg stats.
To prevent this delayed blkcg removal, add a new cgroup_rstat_css_flush()
function to flush stats for a given css and cpu and call it at the blkgs
destruction path, blkcg_destroy_blkgs(), whenever there are still some
pending stats to be flushed. This will ensure that blkcg reference
count can reach 0 ASAP.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-4-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a system with many CPUs and block devices, the time to do
blkcg_rstat_flush() from cgroup_rstat_flush() can be rather long. It
can be especially problematic as interrupt is disabled during the flush.
It was reported that it might take seconds to complete in some extreme
cases leading to hard lockup messages.
As it is likely that not all the percpu blkg_iostat_set's has been
updated since the last flush, those stale blkg_iostat_set's don't need
to be flushed in this case. This patch optimizes blkcg_rstat_flush()
by keeping a lockless list of recently updated blkg_iostat_set's in a
newly added percpu blkcg->lhead pointer.
The blkg_iostat_set is added to a lockless list on the update side
in blk_cgroup_bio_start(). It is removed from the lockless list when
flushed in blkcg_rstat_flush(). Due to racing, it is possible that
blk_iostat_set's in the lockless list may have no new IO stats to be
flushed, but that is OK.
To protect against destruction of blkg, a percpu reference is gotten
when putting into the lockless list and put back when removed.
When booting up an instrumented test kernel with this patch on a
2-socket 96-thread system with cgroup v2, out of the 2051 calls to
cgroup_rstat_flush() after bootup, 1788 of the calls were exited
immediately because of empty lockless list. After an all-cpu kernel
build, the ratio became 6295424/6340513. That was more than 99%.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-3-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For blkcg_css_alloc(), the only error that will be returned is -ENOMEM.
Simplify error handling code by returning this error directly instead
of setting an intermediate "ret" variable.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-2-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Device mappers had always been getting the default 511 dma mask, but
the underlying device might have a larger alignment requirement. Since
this value is used to determine alloweable direct-io alignment, this
needs to be a stackable limit.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221110184501.2451620-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hold a reference to the holder kobject for each bd_holder_disk,
so to make the code a bit more robust, use a reference to it instead
of the block_device. As long as no one clears ->bd_holder_dir in
before freeing the disk, this isn't strictly required, but it does
make the code more clear and more robust.
Orignally-From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-10-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the caller of bd_link_disk_holer() get 'bdev' by
blkdev_get_by_dev(), which will look up 'bdev' by inode number 'dev'.
Howerver, it's possible that del_gendisk() can be called currently, and
'bd_holder_dir' can be freed before bd_link_disk_holer() access it, thus
use after free is triggered.
t1: t2:
bdev = blkdev_get_by_dev
del_gendisk
kobject_put(bd_holder_dir)
kobject_free()
bd_link_disk_holder
Fix the problem by checking disk is still live and grabbing a reference
to 'bd_holder_dir' first in bd_link_disk_holder().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-9-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that dm has been fixed to track of holder registrations before
add_disk, the somewhat buggy block layer code can be safely removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221115141054.1051801-8-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.
Fixes: 89f871af1b ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the block device code should switch to implementing
->writepages instead of ->writepage eventually, the current
implementation is entirely pointless as it does the same looping over
->writepage as the generic code if no ->writepages is present.
Remove blkdev_writepages so that we can eventually unexport
generic_writepages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221116132035.2192924-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever
currently it's only limited to iopoll. Instead of guarding the list with
irq toggling on alloc, which is expensive, it keeps an additional
irq-safe list from which bios are spliced in batches to ammortise
overhead. On the put side it toggles irqs, but in many cases they're
already disabled and so cheap.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c2306de96b900ab9264f4428ec37768ddcf0da36.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Biosets keep a mempool, so as long as requests complete we can always
can allocate and have forward progress. Percpu bio caches break that
assumptions as we may complete into the cache of one CPU and after try
and fail to allocate with another CPU. We also can't grab from another
CPU's cache without tricky sync.
If we're allocating with a bio while the mempool is undersaturated,
remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool.
It might try to free into mempool more requests than required, but
assuming than there is no memory starvation in the system it'll
stabilise and never hit that path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aa150caf9c263fa92269e86d7826cc8fa65f38de.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_css_online is supposed to pin the blkcg of the parent, but
397c9f46ee refactored things and along the way, changed it to pin the
css instead. This results in extra pins, and we end up leaking blkcgs
and cgroups.
Fixes: 397c9f46ee ("blk-cgroup: move blkcg_{pin,unpin}_online out of line")
Signed-off-by: Chris Mason <clm@fb.com>
Spotted-by: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org> # v5.19+
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20221114181930.2093706-1-clm@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use set->nr_hw_queues for the current number of tags, and remove the
duplicate set->nr_hw_queues update in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221109100811.2413423-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in trying to share any code with the realloc case when
all that is needed by the initial tagset allocation is a simple
kcalloc_node.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221109100811.2413423-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
oom_bfqq is just a fallback bfqq, so shouldn't be used with waker
detection.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-2-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL,
but woken_list_node still being hashed. This would happen when
bfq_init_rq() expects a brand new allocated queue to be returned from
bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq
without resetting woken_list_node. Since we can always return oom_bfqq
when attempting to allocate, we cannot assume waker_bfqq starts as NULL.
Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful.
Crashes would have a stacktrace like:
[160595.656560] bfq_add_bfqq_busy+0x110/0x1ec
[160595.661142] bfq_add_request+0x6bc/0x980
[160595.666602] bfq_insert_request+0x8ec/0x1240
[160595.671762] bfq_insert_requests+0x58/0x9c
[160595.676420] blk_mq_sched_insert_request+0x11c/0x198
[160595.682107] blk_mq_submit_bio+0x270/0x62c
[160595.686759] __submit_bio_noacct_mq+0xec/0x178
[160595.691926] submit_bio+0x120/0x184
[160595.695990] ext4_mpage_readpages+0x77c/0x7c8
[160595.701026] ext4_readpage+0x60/0xb0
[160595.705158] filemap_read_page+0x54/0x114
[160595.711961] filemap_fault+0x228/0x5f4
[160595.716272] do_read_fault+0xe0/0x1f0
[160595.720487] do_fault+0x40/0x1c8
Tested by injecting random failures into bfq_get_queue, crashes go away
completely.
Fixes: 8ef3fc3a04 ("block, bfq: make shared queues inherit wakers")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221108181030.1611703-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for
iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be
passed from userspace and enables the NVMe passthru requests to
use P2PDMA pages.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-8-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for
iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be passed
from userspace and enables the O_DIRECT path in iomap based filesystems
and direct to block devices.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-7-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consecutive zone device pages should not be merged into the same sgl
or bvec segment with other types of pages or if they belong to different
pgmaps. Otherwise getting the pgmap of a given segment is not possible
without scanning the entire segment. This helper returns true either if
both pages are not zone device pages or both pages are zone device
pages with the same pgmap.
Add a helper to determine if zone device pages are mergeable and use
this helper in page_is_mergeable().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-5-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In accordance with [1] the DMA-able memory buffers must be
cacheline-aligned otherwise the cache writing-back and invalidation
performed during the mapping may cause the adjacent data being lost. It's
specifically required for the DMA-noncoherent platforms [2]. Seeing the
opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and
SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit()
methods respectively they must be cacheline-aligned to prevent the denoted
problem. One of the option to guarantee that is to kmalloc the buffers
[2]. Let's explicitly allocate them then instead of embedding into the
opal_dev structure instance.
Note this fix was inspired by the commit c94b7f9bab ("nvme-hwmon:
kmalloc the NVME SMART log buffer").
[1] Documentation/core-api/dma-api.rst
[2] Documentation/core-api/dma-api-howto.rst
Fixes: 455a7b238c ("block: Add Sed-opal library")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221107203944.31686-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the description of @required_features in elevator_match()
to clear the below warning:
block/elevator.c:103: warning: Excess function parameter 'required_features' description in 'elevator_match'
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2734
Fixes: ffb86425ee ("block: don't check for required features in elevator_match")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221107062255.2685-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=JQlF
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fixes for the ublk driver (Ming)
- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
Drivers that have shared tagsets may need to quiesce potentially a lot
of request queues that all share a single tagset (e.g. nvme). Add an
interface to quiesce all the queues on a given tagset. This interface is
useful because it can speedup the quiesce by doing it in parallel.
Because some queues should not need to be quiesced (e.g. the nvme
connect_q) when quiescing the tagset, introduce a
QUEUE_FLAG_SKIP_TAGSET_QUIESCE flag to allow this new interface to
ski quiescing a particular queue.
Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: simplify for the per-tag_set srcu_struct]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing in blk_mq_wait_quiesce_done needs the request_queue now, so just
pass the tagset, and move the non-mq check into the only caller that
needs it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All I/O submissions have fairly similar latencies, and a tagset-wide
quiesce is a fairly common operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-12-hch@lst.de
[axboe: fix whitespace]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For submit_bio based queues there is no (S)RCU critical section during
I/O submission and thus nothing to wait for in blk_mq_wait_quiesce_done,
so skip doing any synchronization. No non-mq driver should be calling
this, but for now we have core callers that unconditionally call into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme and xen-blkfront are already doing this to stop buffered writes from
creating dirty pages that can't be written out later. Move it to the
common code.
This also removes the comment about the ordering from nvme, as bd_mutex
not only is gone entirely, but also hasn't been used for locking updates
to the disk size long before that, and thus the ordering requirement
documented there doesn't apply any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prevent unnecessary format conversion for bfqg->bfqd in multiple
places.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Such code are not even compiled since they are inside marco "#if 0".
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just make the code a litter cleaner by removing the unnecessary
variable 'sd'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current code is a bit ugly and hard to read.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Link: https://lore.kernel.org/r/20221102022542.3621219-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the patch "block, bfq: cleanup bfq_weights_tree add/remove apis"),
the local variable 'bfqd' is not used anymore, thus remove it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221102022542.3621219-2-yukuai1@huaweicloud.com
Fixes: afdba14612 ("block, bfq: cleanup bfq_weights_tree add/remove apis")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only need a max queue depth for every iolatency to limit the inflight io
number. Replace struct rq_depth with unsigned int to simplfy "struct
iolatency_grp" and save memory.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20221018111240.22612-4-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Default queue depth of iolatency_grp is unlimited, so we scale down
quickly(once by half) in scale_cookie_change. Remove the "subtract
1/16th" part which is not the truth and add the actual way we
scale down.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221018111240.22612-3-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function blkcg_iolatency_throttle will make sure blkg->parent is not
NULL before calls check_scale_change. And function check_scale_change
is only called in blkcg_iolatency_throttle.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20221018111240.22612-2-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split an elevator_disable helper from elevator_switch for the case where
we want to switch to no scheduler at all. This includes removing the
pointless elevator_switch_mq helper and removing the switch to no
schedule logic from blk_mq_init_sched.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Checking for the required features in the callers simplifies the code
quite a bit, so do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-7-hch@lst.de
[axboe: adjust for dropping patch 1, use __elevator_find()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use eq for the elevator_queue as done elsewhere. This frees e to be used
for the loop iterator instead of the odd __ prefix. In addition rename
elv to cur to make it more clear it is the currently selected elevator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the tag_set has BLK_MQ_F_NO_SCHED flag set we will never show any
scheduler, so exit early.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do the request_module and repeated lookup in the only caller that cares,
pick a saner name that explains where are actually doing a lookup and
use a sane calling conventions that passes the queue first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's the same with bfq_weights_tree_remove() now.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'bfq_data' and 'rb_root_cached' can both be accessed through
'bfq_queue', thus only pass 'bfq_queue' as parameter.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that root group is counted into 'num_groups_with_pending_reqs',
'num_groups_with_pending_reqs > 0' is always true in
bfq_asymmetric_scenario(). Thus change the condition to '> 1'.
On the other hand, this change can enable concurrent sync io if only
one group is activated.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, bfq can't handle sync io concurrently as long as they
are not issued from root group. This is because
'bfqd->num_groups_with_pending_reqs > 0' is always true in
bfq_asymmetric_scenario().
The way that bfqg is counted into 'num_groups_with_pending_reqs':
Before this patch:
1) root group will never be counted.
2) Count if bfqg or it's child bfqgs have pending requests.
3) Don't count if bfqg and it's child bfqgs complete all the requests.
After this patch:
1) root group is counted.
2) Count if bfqg have pending requests.
3) Don't count if bfqg complete all the requests.
With this change, the occasion that only one group is activated can be
detected, and next patch will support concurrent sync io in the
occasion.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare to refactor the counting of 'num_groups_with_pending_reqs'.
Add a counter in bfq_group, update it while tracking if bfqq have pending
requests and when bfq_bfqq_move() is called.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If entity belongs to bfqq, then entity->in_groups_with_pending_reqs
is not used currently. This patch use it to track if bfqq has pending
requests through callers of weights_tree insertion and removal.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220916071942.214222-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list() empties ->mq_list and request we'd peeked there
before that call is gone; in any case, we are not dealing with a mix
of requests for different queues now - there's no requests left in the
plug.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a kmemleak caused by modprobe null_blk.ko
unreferenced object 0xffff8881acb1f000 (size 1024):
comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S......
backtrace:
[<000000004a10c249>] kmalloc_node_trace+0x22/0x60
[<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350
[<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0
[<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440
[<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0
[<00000000d10c98c3>] 0xffffffffc450d69d
[<00000000b9299f48>] 0xffffffffc4538392
[<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0
[<00000000b389383b>] do_init_module+0x1a4/0x680
[<0000000087cf3542>] load_module+0x6249/0x7110
[<00000000beba61b8>] __do_sys_finit_module+0x140/0x200
[<00000000fdcfff51>] do_syscall_64+0x35/0x80
[<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
That is because q->ma_ops is set to NULL before blk_release_queue is
called.
blk_mq_init_queue_data
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
for (i = 0; i < set->nr_hw_queues; i++) {
old_hctx = xa_load(&q->hctx_table, i);
if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1]
if (!old_hctx)
break;
xa_for_each_start(&q->hctx_table, j, hctx, j)
blk_mq_exit_hctx(q, set, hctx, j); [2]
if (!q->nr_hw_queues) [3]
goto err_hctxs;
err_exit:
q->mq_ops = NULL; [4]
blk_put_queue
blk_release_queue
if (queue_is_mq(q)) [5]
blk_mq_release(q);
[1]: blk_mq_alloc_and_init_hctx failed at i != 0.
[2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and
will be cleaned up in blk_mq_release.
[3]: q->nr_hw_queues is 0.
[4]: Set q->mq_ops to NULL.
[5]: queue_is_mq returns false due to [4]. And blk_mq_release
will not be called. The hctxs in q->unused_hctx_list are leaked.
To fix it, call blk_release_queue in exception path.
Fixes: 2f8f1336a4 ("blk-mq: always free hctx after request queue is freed")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221031031242.94107-1-chenjun102@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The calling relationship in blk_mq_destroy_queue() is as follows:
blk_mq_destroy_queue()
...
-> blk_queue_start_drain()
-> blk_freeze_queue_start() <- called
...
-> blk_freeze_queue()
-> blk_freeze_queue_start() <- called again
-> blk_mq_freeze_queue_wait()
...
So there is a redundant call to blk_freeze_queue_start().
Replace blk_freeze_queue() with blk_mq_freeze_queue_wait() to avoid the
redundant call.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030083212.1251255-1-nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kmemleak reported memory leaks in device_add_disk():
kmemleak: 3 new suspected memory leaks
unreferenced object 0xffff88800f420800 (size 512):
comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s)
hex dump (first 32 bytes):
04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................
00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d3662699>] kmalloc_trace+0x26/0x60
[<00000000edc7aadc>] wbt_init+0x50/0x6f0
[<0000000069601d16>] wbt_enable_default+0x157/0x1c0
[<0000000028fc393f>] blk_register_queue+0x2a4/0x420
[<000000007345a042>] device_add_disk+0x6fd/0xe40
[<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd]
...
It is because the memory allocated in wbt_enable_default() is not
released in device_add_disk() error path.
Normally, these memory are freed in:
del_gendisk()
rq_qos_exit()
rqos->ops->exit(rqos);
wbt_exit()
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
Add rq_qos_exit() to the error path to fix it.
Fixes: 83cbce9574 ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221029071355.35462-1-chenzhongjin@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only caller that needs queue_is_mq check is del_gendisk, so move the
check into it.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030094730.1275463-1-nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Jeffery found one double ->queue_rq() issue, so far it can
be triggered in VM use case because of long vmexit latency or preempt
latency of vCPU pthread or long page fault in vCPU pthread, then block
IO req could be timed out before queuing the request to hardware but after
calling blk_mq_start_request() during ->queue_rq(), then timeout handler
may handle it by requeue, then double ->queue_rq() is caused, and kernel
panic.
So far, it is driver's responsibility to cover the race between timeout
and completion, so it seems supposed to be solved in driver in theory,
given driver has enough knowledge.
But it is really one common problem, lots of driver could have similar
issue, and could be hard to fix all affected drivers, even it isn't easy
for driver to handle the race. So David suggests this patch by draining
in-progress ->queue_rq() for solving this issue.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221026051957.358818-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Zfnu
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
Function blk_mq_alloc_request_hctx() is missing zeroing/init of rq->bio,
biotail, __sector, and __data_len members, which blk_mq_alloc_request()
has, so duplicate what we do in blk_mq_alloc_request().
Fixes: 1f5bd336b9 ("blk-mq: add blk_mq_alloc_request_hctx")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1666780513-121650-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Document which functions do not modify the queue limits.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-3-bvanassche@acm.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The fact that blk_mq_destroy_queue also drops a queue reference leads
to various places having to grab an extra reference. Move the call to
blk_put_queue into the callers to allow removing the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-2-hch@lst.de
[axboe: fix fabrics_q vs admin_q conflict in nvme core.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current reference management logic of io scheduler modules contains
refcnt problems. For example, blk_mq_init_sched may fail before or after
the calling of e->ops.init_sched. If it fails before the calling, it does
nothing to the reference to the io scheduler module. But if it fails after
the calling, it releases the reference by calling kobject_put(&eq->kobj).
As the callers of blk_mq_init_sched can't know exactly where the failure
happens, they can't handle the reference to the io scheduler module
properly: releasing the reference on failure results in double-release if
blk_mq_init_sched has released it, and not releasing the reference results
in ghost reference if blk_mq_init_sched did not release it either.
The same problem also exists in io schedulers' init_sched implementations.
We can address the problem by adding releasing statements to the error
handling procedures of blk_mq_init_sched and init_sched implementations.
But that is counterintuitive and requires modifications to existing io
schedulers.
Instead, We make elevator_alloc get the io scheduler module references
that will be released by elevator_release. And then, we match each
elevator_get with an elevator_put. Therefore, each reference to an io
scheduler module explicitly has its own getter and releaser, and we no
longer need to worry about the refcnt problems.
The bugs and the patch can be validated with tools here:
https://github.com/nickyc975/linux_elv_refcnt_bug.git
[hch: split out a few bits into separate patches, use a non-try
module_get in elevator_alloc]
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to find the actual elevator_type struct for this comparism,
the name is all that is needed.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The stripped name should also be used for the none check. To do so
strip it in the caller and pass in the sanitized name. Drop the pointless
__ prefix in the function name while we're at it.
Based on a patch from Jinlong Chen <nickyc975@zju.edu.cn>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure we have helpers for all relevant module refcount operations on
the elevator_type in elevator.h, and use them. Move the call to the get
helper in blk_mq_elv_switch_none a bit so that it is obvious with a less
verbose comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b5dc5d4d1f ("block,bfq: Disable writeback throttling") tries to
disable wbt for bfq, it's done by calling wbt_disable_default() in
bfq_init_queue(). However, wbt is still enabled if default elevator is
bfq:
device_add_disk
elevator_init_mq
bfq_init_queue
wbt_disable_default -> done nothing
blk_register_queue
wbt_enable_default -> wbt is enabled
Fix the problem by adding a new flag ELEVATOR_FLAG_DISBALE_WBT, bfq
will set the flag in bfq_init_queue, and following wbt_enable_default()
won't enable wbt while the flag is set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are only one flag to indicate that elevator is registered currently,
prepare to add a flag to disable wbt if default elevator is bfq.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if wbt is initialized and then disabled by
wbt_disable_default(), sysfs will still show valid wbt_lat_usec, which
will confuse users that wbt is still enabled.
This patch shows wbt_lat_usec as zero if it's disabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reported-and-tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if user disable wbt through sysfs, 'enable_state' will be
'WBT_STATE_ON_MANUAL', which will be confusing. Add a new state
'WBT_STATE_OFF_MANUAL' to cover that case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
"elevator_queue *e" is already declared and initialized in the beginning
of elv_unregister_queue().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221019121518.3865235-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'ioc->params' is updated in ioc_refresh_params(), which is proteced by
'ioc->lock', however, ioc_timer_fn() read params outside the lock.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This won't cause any severe problem currently, however, this doesn't
seems appropriate:
1) 'ioc->params' is read from multiple places without holding
'ioc->lock', unexpected value might be read if writing it concurrently.
2) If configuration is changed while io is throttling, the functionality
might be affected. For example, if module params is updated and cost
becomes smaller, waiting for timer that is caculated under old
configuration is not appropriate.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioc_qos_write() and ioc_cost_model_write() are the same:
1) hold lock to read 'ioc->params' to local variable;
2) update params to local variable without lock;
3) hold lock to write local variable to 'ioc->params';
In theroy, if user updates params concurrenty, the params might be lost:
t1: update params a t2: update params b
spin_lock_irq(&ioc->lock);
memcpy(qos, ioc->params.qos, sizeof(qos))
spin_unlock_irq(&ioc->lock);
qos[a] = xxx;
spin_lock_irq(&ioc->lock);
memcpy(qos, ioc->params.qos, sizeof(qos))
spin_unlock_irq(&ioc->lock);
qos[b] = xxx;
spin_lock_irq(&ioc->lock);
memcpy(ioc->params.qos, qos, sizeof(qos));
ioc_refresh_params(ioc, true);
spin_unlock_irq(&ioc->lock);
spin_lock_irq(&ioc->lock);
// updates of a will be lost
memcpy(ioc->params.qos, qos, sizeof(qos));
ioc_refresh_params(ioc, true);
spin_unlock_irq(&ioc->lock);
Althrough this is not common case, the problem can by fixed easily by
holding the lock through the read, update, write process.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b5dc5d4d1f ("block,bfq: Disable writeback throttling") disable
wbt for bfq, because different write-throttling heuristics should not
work together.
For the same reason, wbt and iocost should not work together as well,
unless admin really want to do that, dispite that performance is
affected.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The default elevator is allocated in the beginning of device_add_disk(),
however, it's not freed in the following error path.
Fixes: 50e34d7881 ("block: disable the elevator int del_gendisk")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20221022021615.2756171-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_put() with REQ_ALLOC_CACHE assumes that it's executed not from
an irq context. Let's add a warning if the invariant is not respected,
especially since there is a couple of places removing REQ_POLLED by hand
without also clearing REQ_ALLOC_CACHE.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/558d78313476c4e9c233902efa0092644c3d420a.1666122465.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Our syzkaller report a null pointer dereference, root cause is
following:
__blk_mq_alloc_map_and_rqs
set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs
blk_mq_alloc_map_and_rqs
blk_mq_alloc_rqs
// failed due to oom
alloc_pages_node
// set->tags[hctx_idx] is still NULL
blk_mq_free_rqs
drv_tags = set->tags[hctx_idx];
// null pointer dereference is triggered
blk_mq_clear_rq_mapping(drv_tags, ...)
This is because commit 63064be150 ("blk-mq:
Add blk_mq_alloc_map_and_rqs()") merged the two steps:
1) set->tags[hctx_idx] = blk_mq_alloc_rq_map()
2) blk_mq_alloc_rqs(..., set->tags[hctx_idx])
into one step:
set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs()
Since tags is not initialized yet in this case, fix the problem by
checking if tags is NULL pointer in blk_mq_clear_rq_mapping().
Fixes: 63064be150 ("blk-mq: Add blk_mq_alloc_map_and_rqs()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20221011142253.4015966-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
-----BEGIN PGP SIGNATURE-----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=kxra
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Fixes that ended up landing later than the initial block pull request.
Nothing really major in here:
- NVMe pull request via Christoph:
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state
on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi
Grimberg)
- Proactively avoid a sign extension issue with the queue flags
(Brian)
- Regression fix for hidden disks (Christoph)
- Update OPAL maintainers entry (Jonathan)
- blk-wbt regression initialization fix (Yu)"
* tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
* cpuset now support isolated cpus.partition type, which will enable dynamic
CPU isolation.
* pids.peak added to remember the max number of pids used.
* Holes in cgroup namespace plugged.
* Internal cleanups.
Note that for-6.1-fixes was pulled into for-6.1 twice. Both were for
follow-up cleanups and each merge commit has details.
Also, 8a693f7766 ("cgroup: Remove CFTYPE_PRESSURE") removes the flag used
by PSI changes in the tip tree and the merged result won't compile due to
the missing flag. Simply removing the struct init lines specifying the flag
is the correct resolution. linux-next already contains the correct fix:
https://lkml.kernel.org/r/20220912161812.072aaa3b@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYzsl7w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGYsxAP4kad4YPw+CueLyyEMiYgBHouqDt8cG0+FJWK3X
svTC7wD/eCLfxZM8TjjSrMmvaMrml586mr3NoQaFeW0x3twptQQ=
=LERu
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now support isolated cpus.partition type, which will enable
dynamic CPU isolation
- pids.peak added to remember the max number of pids used
- holes in cgroup namespace plugged
- internal cleanups
* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
cgroup: use strscpy() is more robust and safer
iocost_monitor: reorder BlkgIterator
cgroup: simplify code in cgroup_apply_control
cgroup: Make cgroup_get_from_id() prettier
cgroup/cpuset: remove unreachable code
cgroup: Remove CFTYPE_PRESSURE
cgroup: Improve cftype add/rm error handling
kselftest/cgroup: Add cpuset v2 partition root state test
cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
cgroup/cpuset: Relocate a code block in validate_change()
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
cgroup: add pids.peak interface for pids controller
cgroup: Remove data-race around cgrp_dfl_visible
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
...
Merge in later fixes.
* for-6.1/block:
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
The major/minor of a hidden gendisk is not propagated to the block
device because it is never registered using bdev_add. But the lack of
bd_dev also causes the dynamic major minor number not to be freed.
Assign bd_dev manually to ensure the dynamic major minor gets freed.
Based on a patch by Keith Busch.
Fixes: 8ddcd65325 ("block: introduce GENHD_FL_HIDDEN")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221010131857.748129-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 8c5035dfbb ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.
Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.
Fixes: 8c5035dfbb ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=nwLk
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux
Pull passthrough updates from Jens Axboe:
"With these changes, passthrough NVMe support over io_uring now
performs at the same level as block device O_DIRECT, and in many cases
6-8% better.
This contains:
- Add support for fixed buffers for passthrough (Anuj, Kanchan)
- Enable batched allocations and freeing on passthrough, similarly to
what we support on the normal storage path (me)
- Fix from Geert fixing an issue with !CONFIG_IO_URING"
* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
nvme: wire up fixed buffer support for nvme passthrough
nvme: pass ubuffer as an integer
block: extend functionality to map bvec iterator
block: factor out blk_rq_map_bio_alloc helper
block: rename bio_map_put to blk_mq_map_bio_put
nvme: refactor nvme_alloc_request
nvme: refactor nvme_add_user_metadata
nvme: Use blk_rq_map_user_io helper
scsi: Use blk_rq_map_user_io helper
block: add blk_rq_map_user_io
io_uring: introduce fixed buffer support for io_uring_cmd
io_uring: add io_uring_cmd_import_fixed
nvme: enable batched completions of passthrough IO
nvme: split out metadata vs non metadata end_io uring_cmd completions
block: allow end_io based requests in the completion batch handling
block: change request end_io handler to pass back a return value
block: enable batched allocation for blk_mq_alloc_request()
block: kill deprecated BUG_ON() in the flush handling
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
-----BEGIN PGP SIGNATURE-----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=m9kX
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Add supported for more directly managed task_work running.
This is beneficial for real world applications that end up issuing
lots of system calls as part of handling work. Normal task_work will
always execute as we transition in and out of the kernel, even for
"unrelated" system calls. It's more efficient to defer the handling
of io_uring's deferred work until the application wants it to be run,
generally in batches.
As part of ongoing work to write an io_uring network backend for
Thrift, this has been shown to greatly improve performance. (Dylan)
- Add IOPOLL support for passthrough (Kanchan)
- Improvements and fixes to the send zero-copy support (Pavel)
- Partial IO handling fixes (Pavel)
- CQE ordering fixes around CQ ring overflow (Pavel)
- Support sendto() for non-zc as well (Pavel)
- Support sendmsg for zerocopy (Pavel)
- Networking iov_iter fix (Stefan)
- Misc fixes and cleanups (Pavel, me)
* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment restrictions.
Specifically, STATX_DIOALIGN works on block devices, and on regular
files when their containing filesystem has implemented support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can be
affected by various filesystem features such as multi-device support,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode, etc. Further complicating
things, Linux v6.0 relaxed the traditional rule of DIO needing to be
aligned to the block device's logical block size; now user buffers (but
not file offsets) only need to be aligned to the DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page update
https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5
euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg=
=0Oav
-----END PGP SIGNATURE-----
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
KMSAN doesn't allow treating adjacent memory pages as such, if they were
allocated by different alloc_pages() calls. The block layer however does
so: adjacent pages end up being used together. To prevent this, make
page_is_mergeable() return false under KMSAN.
Link: https://lkml.kernel.org/r/20220915150417.722975-29-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN metadata for adjacent physical pages may not be adjacent, therefore
accessing such pages together may lead to metadata corruption. We disable
merging pages in biovec to prevent such corruptions.
Link: https://lkml.kernel.org/r/20220915150417.722975-28-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend blk_rq_map_user_iov so that it can handle bvec iterator, using
the new blk_rq_map_user_bvec function. It maps the pages from bvec
iterator into a bio and place the bio into request.
This helper will be used by nvme for uring-passthrough path when IO is
done using pre-mapped buffers.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-11-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move bio allocation logic from bio_map_user_iov to a new helper
blk_rq_map_bio_alloc. It is named so because functionality is opposite
of what is done inside blk_mq_map_bio_put. This is a prep patch.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-10-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a helper blk_rq_map_user_io for mapping of vectored as well as
non-vectored requests. This will help in saving dupilcation of code at few
places in scsi and nvme.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-4-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With end_io handlers now being able to potentially pass ownership of
the request upon completion, we can allow requests with end_io handlers
in the batch completion handling.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The filesystem IO path can take advantage of allocating batches of
requests, if the underlying submitter tells the block layer about it
through the blk_plug. For passthrough IO, the exported API is the
blk_mq_alloc_request() helper, and that one does not allow for
request caching.
Wire up request caching for blk_mq_alloc_request(), which is generally
done without having a bio available upfront.
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've never had any useful reports from this BUG_ON(), and in fact a
number of the BUG_ON()'s in the flush handling need to be turned into
more graceful handling.
In preparation for allowing batched completions of the end_io handling,
where we can enter the flush completion with queuelist having been reused
for the batch, get rid of this BUG_ON().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two places in the block layer at the moment where
blk_mq_plug() helper could be used instead of directly accessing the
plug from struct current. In both these cases, directly accessing the plug
should not have any consequences for zoned devices.
Make the intent explicit by adding comments instead of introducing unwanted
checks with blk_mq_plug() helper.[1]
[1] https://lore.kernel.org/linux-block/f6e54907-1035-2b2c-6387-ed178be05ccb@kernel.dk/
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220929144141.140077-1-p.raghav@samsung.com
[axboe: fixup multi-line comment style]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as we just check if
the last bit in op_is_write() function.
Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and
REQ_OP_WRITE_ZEROS as they might require a zone lock.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg_conf_prep just creates a new blkg structure, there is no real
need to update the lookup hint which should only be done on a
successful lookup in the I/O path.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220927065425.257876-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The hctx's run_work may be racing with the elevator switch when
reinitializing hardware queues. The queue is merely frozen in this
context, but that only prevents requests from allocating and doesn't
stop the hctx work from running. The work may get an elevator pointer
that's being torn down, and can result in use-after-free errors and
kernel panics (example below). Use the quiesced elevator switch instead,
and make the previous one static since it is now only used locally.
nvme nvme0: resetting controller
nvme nvme0: 32/0/0 default/read/poll queues
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0
Oops: 0000 [#1] SMP PTI
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:kyber_has_work+0x29/0x70
...
Call Trace:
__blk_mq_do_dispatch_sched+0x83/0x2b0
__blk_mq_sched_dispatch_requests+0x12e/0x170
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x2b/0x50
process_one_work+0x1ef/0x380
worker_thread+0x2d/0x3e0
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220927155652.3260724-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace blk_queue_nowait with a bdev_nowait helpers that takes the
block_device given that the I/O submission path should not have to
look into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220927075815.269694-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the blkcg information in the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blkcg_schedule_throttle as part of moving the
blk-cgroup infrastructure to be gendisk based. Remove the unused
!BLK_CGROUP stub while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blkg_destroy_all as part of moving the blk-cgroup
infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blk_throtl_cancel_bios as part of moving the
blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blk_throtl_register_queue as part of moving the
blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blk_throtl_init and blk_throtl_exit as part of moving
the blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a local disk variable instead of retrieving the disk and
request_queue over and over by various means.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blk_iocost_init as part of moving the blk-cgroup
infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just directly dereference the disk name instead of going through multiple
hoops to find the same value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blk_iolatency_init as part of moving the blk-cgroup
infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-9-hch@lst.de
[axboe: missed inline for blk_iolatency_init() and !CONFIG_BLK_CGROUP_IOLATENCY]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blk_ioprio_init and blk_ioprio_exit as part of moving
the blk-cgroup infrastructure to be gendisk based.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the gendisk to blkcg_init_disk and blkcg_exit_disk as part of moving
the blk-cgroup infrastructure to be gendisk based. Also remove the
rather pointless kerneldoc comments for these internal functions with a
single caller each.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The combinations of an error check with an ERR_PTR return and a lookup
with a NULL return leads to ugly handling of the return values in the
callers. Just open coding the check and the lookup is much simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a fully inlined blkg_lookup as the extra two checks aren't going
to generated a lot more code vs the call to the slowpath routine, and
open code the hint update in the two callers that care.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blkg_lookup instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just open code it in the only caller and drop the unused !BLK_CGROUP
stub.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When blk_throtl_init fails, we need to call blk_ioprio_exit. Switch to
proper goto based unwinding to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921180501.1539876-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Z0yq
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Fix a regression that's been plaguing us by reverting the offending
commit, as attempts to both reproduce the issue and fix it in a saner
fashion have failed.
Fix for a potential oops condition in the s390 dasd block driver"
* tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux:
Revert "block: freeze the queue earlier in del_gendisk"
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
High-performance NVMe devices usually support a large hw queues, which
ensures a 1:1 mapping of hctx and ctx. In this case there will be no
remote request, so we don't need to care about it.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663731123-81536-1-git-send-email-liusong@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
"tg->has_rules" is extended to "tg->has_rules_iops/bps", thus bios that
don't need to be throttled can be checked accurately.
With this patch, bio will be throttled if:
1) Bio is read/write, and corresponding read/write iops limit exist.
2) If corresponding doesn't exist, corresponding bps limit exist and
bio is not throttled before.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921095309.1481289-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, "tg->has_rules" and "tg->flags & THROTL_TG_HAS_IOPS_LIMIT"
both try to bypass bios that don't need to be throttled, however, they are
a little redundant and both not perfect:
1) "tg->has_rules" only distinguish read and write, but not iops and bps
limit.
2) "tg->flags & THROTL_TG_HAS_IOPS_LIMIT" only check if iops limit
exist, read and write is not distinguished, and bps limit is not
checked.
tg->has_rules will extended to distinguish bps and iops in the following
patch. There is no need to keep the flag.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220921095309.1481289-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
for-6.0 has the following fix for cgroup_get_from_id().
836ac87d ("cgroup: fix cgroup_get_from_id")
which conflicts with the following two commits in for-6.1.
4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id")
fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value")
While the resolution is straightforward, the code ends up pretty ugly
afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be
fixed up there.
Signed-off-by: Tejun Heo <tj@kernel.org>
Since blk-ioprio handing was converted from a rqos policy to a direct call,
RQ_QOS_IOPRIO is not used anymore, just delete it.
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220916023241.32926-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Our test found a problem that wbt inflight counter is negative, which
will cause io hang(noted that this problem doesn't exist in mainline):
t1: device create t2: issue io
add_disk
blk_register_queue
wbt_enable_default
wbt_init
rq_qos_add
// wb_normal is still 0
/*
* in mainline, disk can't be opened before
* bdev_add(), however, in old kernels, disk
* can be opened before blk_register_queue().
*/
blkdev_issue_flush
// disk size is 0, however, it's not checked
submit_bio_wait
submit_bio
blk_mq_submit_bio
rq_qos_throttle
wbt_wait
bio_to_wbt_flags
rwb_enabled
// wb_normal is 0, inflight is not increased
wbt_queue_depth_changed(&rwb->rqos);
wbt_update_limits
// wb_normal is initialized
rq_qos_track
wbt_track
rq->wbt_flags |= bio_to_wbt_flags(rwb, bio);
// wb_normal is not 0，wbt_flags will be set
t3: io completion
blk_mq_free_request
rq_qos_done
wbt_done
wbt_is_tracked
// return true
__wbt_done
wbt_rqw_done
atomic_dec_return(&rqw->inflight);
// inflight is decreased
commit 8235b5c1e8 ("block: call bdev_add later in device_add_disk") can
avoid this problem, however it's better to fix this problem in wbt:
1) Lower kernel can't backport this patch due to lots of refactor.
2) Root cause is that wbt call rq_qos_add() before wb_normal is
initialized.
Fixes: e34cbd3074 ("blk-wbt: add general throttling mechanism")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220913105749.3086243-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
PSI accounting is now done by the VM code, where it should have been
since the beginning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220915094200.139713-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit a09b314005.
Dusty Mabe reported consistent hang during CoreOS shutdown with a MD
RAID1 setup. Although apparently similar hangs happened before,
and this patch most likely is not the root cause it made it much
more severe. Revert it until we can figure out what is going on
with the md driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220919144049.978907-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=jBr+
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes for -rc6:
- Fix a mixup of sectors and bytes in the secure erase ioctl
(Mikulas)
- Fix for a bad return value for a non-blocking bio/blk queue enter
call (me)"
* tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
blk-lib: fix blkdev_issue_secure_erase
block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
There's a bug in blkdev_issue_secure_erase. The statement
"unsigned int len = min_t(sector_t, nr_sects, max_sectors);"
sets the variable "len" to the length in sectors, but the statement
"bio->bi_iter.bi_size = len" treats it as if it were in bytes.
The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len <<
SECTOR_SHIFT" are thinko.
This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v5.19
Fixes: 44abff2c0b ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD")
Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the
nowait code path. This is not correct: they should return -EAGAIN
instead.
This problem was detected by fio. The following command exposed the
above problem:
t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1
By applying the patch, the retry case is handled correctly in the slow
path.
Signed-off-by: Stefan Roesch <shr@fb.com>
Fixes: bfd343aa17 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
tg_update_disptime() only need to adjust postion for 'tg' in
'parent_sq', there is no need to call throtl_enqueue/dequeue_tg(),
since they will set/clear flag THROTL_TG_PENDING and increase/decrease
nr_pending, which is useless. By the way, clear the flag/decrease
nr_pending while there are still throttled bios is not good for debugging.
There are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220827101637.1775111-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a little weird to call throtl_dequeue_tg() unconditionally in
throtl_select_dispatch(), since it will be called in tg_update_disptime()
again if some bio is still throttled. Thus call it later if there are no
throttled bio. There are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220827101637.1775111-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If new configuration is submitted while a bio is throttled, then new
waiting time is recalculated regardless that the bio might already wait
for some time:
tg_conf_updated
throtl_start_new_slice
tg_update_disptime
throtl_schedule_next_dispatch
Then io hung can be triggered by always submmiting new configuration
before the throttled bio is dispatched.
Fix the problem by respecting the time that throttled bio already waited.
In order to do that, add new fields to record how many bytes/io are
waited, and use it to calculate wait time for throttled bio under new
configuration.
Some simple test:
1)
cd /sys/fs/cgroup/blkio/
echo $$ > cgroup.procs
echo "8:0 2048" > blkio.throttle.write_bps_device
{
sleep 2
echo "8:0 1024" > blkio.throttle.write_bps_device
} &
dd if=/dev/zero of=/dev/sda bs=8k count=1 oflag=direct
2)
cd /sys/fs/cgroup/blkio/
echo $$ > cgroup.procs
echo "8:0 1024" > blkio.throttle.write_bps_device
{
sleep 4
echo "8:0 2048" > blkio.throttle.write_bps_device
} &
dd if=/dev/zero of=/dev/sda bs=8k count=1 oflag=direct
test results: io finish time
before this patch with this patch
1) 10s 6s
2) 8s 6s
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes, new apis will be used in later patches to
calculate wait time for throttled bios when new configuration is
submitted.
Noted this patch also rename tg_with_in_iops/bps_limit() to
tg_within_iops/bps_limit().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a problem found by code review in tg_with_in_bps_limit() that
'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by
calling mul_u64_u64_div_u64() instead.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Test scripts:
cd /sys/fs/cgroup/blkio/
echo "8:0 1024" > blkio.throttle.write_bps_device
echo $$ > cgroup.procs
dd if=/dev/zero of=/dev/sda bs=10k count=1 oflag=direct &
dd if=/dev/zero of=/dev/sda bs=10k count=1 oflag=direct &
Test result:
10240 bytes (10 kB, 10 KiB) copied, 10.0134 s, 1.0 kB/s
10240 bytes (10 kB, 10 KiB) copied, 10.0135 s, 1.0 kB/s
The problem is that the second bio is finished after 10s instead of 20s.
Root cause:
1) second bio will be flagged:
__blk_throtl_bio
while (true) {
...
if (sq->nr_queued[rw]) -> some bio is throttled already
break
};
bio_set_flag(bio, BIO_THROTTLED); -> flag the bio
2) flagged bio will be dispatched without waiting:
throtl_dispatch_tg
tg_may_dispatch
tg_with_in_bps_limit
if (bps_limit == U64_MAX || bio_flagged(bio, BIO_THROTTLED))
*wait = 0; -> wait time is zero
return true;
commit 9f5ede3c01 ("block: throttle split bio in case of iops limit")
support to count split bios for iops limit, thus it adds flagged bio
checking in tg_with_in_bps_limit() so that split bios will only count
once for bps limit, however, it introduce a new problem that io throttle
won't work if multiple bios are throttled.
In order to fix the problem, handle iops/bps limit in different ways:
1) for iops limit, there is no flag to record if the bio is throttled,
and iops is always applied.
2) for bps limit, original bio will be flagged with BIO_BPS_THROTTLED,
and io throttle will ignore bio with the flag.
Noted this patch also remove the code to set flag in __bio_clone(), it's
introduced in commit 111be88398 ("block-throttle: avoid double
charge"), and author thinks split bio can be resubmited and throttled
again, which is wrong because split bio will continue to dispatch from
caller.
Fixes: 9f5ede3c01 ("block: throttle split bio in case of iops limit")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for STATX_DIOALIGN to block devices, so that direct I/O
alignment restrictions are exposed to userspace in a generic way.
Note that this breaks the tradition of stat operating only on the block
device node, not the block device itself. However, it was felt that
doing this is preferable, in order to make the interface useful and
avoid needing separate interfaces for regular files and block devices.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-3-ebiggers@kernel.org
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmMbdksQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpqm8EACPqE5eFwFtZZnYV8eFjtTQCA5aZ+u3HyF8
Xby5FEZxwpRaaGPwUZ6T7A45ZVH5ka+JPvSQYeSTKxdjBVeqmAUVnlhqLjxeTvJt
WhfSCrPq553eYIKoeUVGxLfQ5GhK4f/2noiEMUIEOMSsDyh4txm46MRNdfi5doj1
2JlbJyoTIK0ZRoraAuZp07bZPFnbxtjSB9YJlUqyKpiSMbM+xocPRaB3Tpr42So8
vUdgt2/tDZ2xNOf4gd1KqUlosIlaG0RWeZeXTU9knrQjPYtB77iM6MVDUGhgiYT/
w25XYCbZiGt1YwRTOYFX9bE6jGuPDc54isRqCmPSjYwTAbeEd7sWytn5D1W0IkaF
dH93mDaW+8/GrjdGVCJ4jLPRCfQvZZ8i5XlwXaXQfnTQ8okUelx5BJ6kEfKRUkhV
nZD0r5MskH4dQv4ESluaeblrDWphMaznZLNjp+UXfiycsbE9l2TX1FOjyK9E7f7o
4zGYiertjc7wj0OnnoDTf0wdpXI13xDqQGFhe1Lnz4tOrpTfzZqwyv4IkFo3VghR
OocJFk4GSuKLwDPASDY/B+nynhQw5fft/fp458Q5pFY/2zItvmg2rxloFetUAz9i
0kcrO4NuO1l6E20KoBED2HMrQOow68dqcCJTrRcXhDfUIRIk0XSg4Kd/nGJBhZZS
5mv/hhkjjQ==
=3RZd
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
We're missing TIMED_OUT and RESV. Particularly the former is handy
for debugging, let's get them added.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_check_ro() always return false now. Remove this unneeded return value
and cleanup the sole caller. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220905102754.1942-1-linmiaohe@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If code reaches here, needs_restart must be true. Remove this unneeded
needs_restart check. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220905101950.4606-1-linmiaohe@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While doing code coverage testing while CONFIG_BLK_DEV_THROTTLING_LOW is
disabled, we found that there are many codes can never be reached.
This patch move such codes inside "#ifdef CONFIG_BLK_DEV_THROTTLING_LOW".
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220903062826.1099085-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 16ede66973.
This is causing issues with CPU stalls on my test box, revert it for
now until we understand what is going on. It looks like infinite
looping off sbitmap_queue_wake_up(), but hard to tell with a lot of
CPUs hitting this issue and the console scrolling infinitely.
Link: https://lore.kernel.org/linux-block/e742813b-ce5c-0d58-205b-1626f639b1bd@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b9684a71fc ("block, loop: support partitions without scanning")
adds GD_SUPPRESS_PART_SCAN for replacing part function of
GENHD_FL_NO_PART. But looks blk_add_partitions() is missed, since
loop doesn't want to add partitions if GENHD_FL_NO_PART was set.
And it causes regression on libblockdev (as called from udisks) which
operates with the LO_FLAGS_PARTSCAN.
Fixes the issue by not adding partitions if GD_SUPPRESS_PART_SCAN is
set.
Fixes: b9684a71fc ("block, loop: support partitions without scanning")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823103819.395776-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is useful for polled IO on a file, or for polled IO with the
io_uring passthrough mechanism. If bio allocations are done with
REQ_POLLED for those cases, then initializing the bio set with
BIOSET_PERCPU_CACHE enables the local per-cpu cache which eliminates
allocations (and frees) of bio structs when possible.
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cgroup id is user provided datum hence extend its return domain to
include possible error reason (similar to cgroup_get_from_fd()).
This change also fixes commit d4ccaf58a8 ("bpf: Introduce cgroup
iter") that would use NULL instead of proper error handling in
d4ccaf58a8 ("bpf: Introduce cgroup iter").
Additionally, neither of: fc_appid_store, bpf_iter_attach_cgroup,
mem_cgroup_get_from_ino (callers of cgroup_get_from_fd) is built without
CONFIG_CGROUPS (depends via CONFIG_BLK_CGROUP, direct, transitive
CONFIG_MEMCG respectively) transitive, so drop the singular definition
not needed with !CONFIG_CGROUPS.
Fixes: d4ccaf58a8 ("bpf: Introduce cgroup iter")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qR5N
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- Fix for clustered raid (Guoqing Jiang)
- req_op fix (Bart Van Assche)
- Fix race condition in raid recreate (David Sloan)
- loop configuration overflow fix (Siddh)
- Fix missing commit_rqs call for certain conditions (Yu)
* tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
loop: Check for overflow while configuring loop
blk-mq: fix io hung due to missing commit_rqs
Avoid a kmalloc+kfree for each page array, if we only have a few pages
that are mapped. An alloc+free for each IO is quite expensive, and
it's pretty pointless if we're only dealing with 1 or a few vecs.
Use UIO_FASTIOV like we do in other spots to set a sane limit for how
big of an IO we want to avoid allocations for.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdev based polled O_DIRECT is currently quite a bit faster than
passthru on the same device, and one of the reaons is that we're not
able to use the bio caching for passthru IO.
If REQ_POLLED is set on the request, use the fs bio set for grabbing a
bio from the caches, if available. This saves 5-6% of CPU over head
for polled passthru IO.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need full ints for several of these members. Change the
page_order and nr_entries to unsigned shorts, and the true/false from_user
and null_mapped to booleans.
This shrinks the struct from 32 to 24 bytes on 64-bit archs.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'bfqd' can be accessed through 'bfqq->bfqd', there is no need to pass
it as a parameter separately.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220816015631.1323948-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While doing code coverage testing(CONFIG_BFQ_CGROUP_DEBUG is disabled), we
found that some functions doesn't have caller, thus remove them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220816015631.1323948-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a mechanism to retrieve basic status information about
the device, including the "supported" flag indicating whether
SED-OPAL is supported. The information returned is from the various
feature descriptors received during the discovery0 step, and so
this ioctl does nothing more than perform the discovery0 step
and then save the information received. See "struct opal_status"
and OPAL_FL_* bits for the status information currently returned.
This is necessary to be able to check whether a device is OPAL
enabled, set up, locked or unlocked from userspace programs
like systemd-cryptsetup and libcryptsetup. Right now we just
have to assume the user 'knows' or blindly attempt setup/lock/unlock
operations.
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=y2HE
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
Currently, in virtio_scsi, if 'bd->last' is not set to true while
dispatching request, such io will stay in driver's queue, and driver
will wait for block layer to dispatch more rqs. However, if block
layer failed to dispatch more rq, it should trigger commit_rqs to
inform driver.
There is a problem in blk_mq_try_issue_list_directly() that commit_rqs
won't be called:
// assume that queue_depth is set to 1, list contains two rq
blk_mq_try_issue_list_directly
blk_mq_request_issue_directly
// dispatch first rq
// last is false
__blk_mq_try_issue_directly
blk_mq_get_dispatch_budget
// succeed to get first budget
__blk_mq_issue_directly
scsi_queue_rq
cmd->flags |= SCMD_LAST
virtscsi_queuecommand
kick = (sc->flags & SCMD_LAST) != 0
// kick is false, first rq won't issue to disk
queued++
blk_mq_request_issue_directly
// dispatch second rq
__blk_mq_try_issue_directly
blk_mq_get_dispatch_budget
// failed to get second budget
ret == BLK_STS_RESOURCE
blk_mq_request_bypass_insert
// errors is still 0
if (!list_empty(list) || errors && ...)
// won't pass, commit_rqs won't be called
In this situation, first rq relied on second rq to dispatch, while
second rq relied on first rq to complete, thus they will both hung.
Fix the problem by also treat 'BLK_STS_*RESOURCE' as 'errors' since
it means that request is not queued successfully.
Same problem exists in blk_mq_dispatch_rq_list(), 'BLK_STS_*RESOURCE'
can't be treated as 'errors' here, fix the problem by calling
commit_rqs if queue_rq return 'BLK_STS_*RESOURCE'.
Fixes: d666ba98f8 ("blk-mq: add mq_ops->commit_rqs()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220726122224.1790882-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do test on a virtio scsi device (/dev/sda) and the default mq
scheduler is 'none'. We found a IO hung as following:
blk_finish_plug
blk_mq_plug_issue_direct
scsi_mq_get_budget
//get budget_token fail and sdev->restarts=1
scsi_end_request
scsi_run_queue_async
//sdev->restart=0 and run queue
blk_mq_request_bypass_insert
//add request to hctx->dispatch list
//continue to dispath plug list
blk_mq_dispatch_plug_list
blk_mq_try_issue_list_directly
//success issue all requests from plug list
After .get_budget fail, scsi_mq_get_budget will increase 'restarts'.
Normally, it will run hw queue when io complete and set 'restarts'
as 0. But if we run queue before adding request to the dispatch list
and blk_mq_dispatch_plug_list also success issue all requests, then
on one will run queue, and the request will be stall in the dispatch
list and cannot complete forever.
It is wrong to use last request of plug list to decide if run queue is
needed since all the remained requests in plug list may be from other
hctxs. To fix the bug, pass run_queue as true always to
blk_mq_request_bypass_insert().
Fix-suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Fixes: dc5fc361d8 ("block: attempt direct issue of plug list")
Link: https://lore.kernel.org/r/20220803023355.3687360-1-yuyufen@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=1/w+
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=pgNf
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr). The main driver change that might cause issues on down the
road is the conversion of some of our oldest surviving drivers to the
DMA API (should only affect m68k). The only major core change is the
rework of async resume; the rest are either completely trivial or for
updating deprecated APIs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
krSdwsAZiV6yKg/HuPw=
=Ak9L
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
One of the goals is to reduce the overhead of using ->read_iter()
and ->write_iter() instead of ->read()/->write(); new_sync_{read,write}()
has a surprising amount of overhead, in particular inside iocb_flags().
That's why the beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurGOQAKCRBZ7Krx/gZQ
6ysyAP91lvBfMRepcxpd9kvtuzWkU8A3rfSziZZteEHANB9Q7QEAiPn2a2OjWkcZ
uAyUWfCkHCNx+dSMkEvUgR5okQ0exAM=
=9UCV
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
The size being added to a bio from an iov is aligned to a block size
after the pages were gotten. If the new aligned size truncates the last
page, its reference was being leaked. Ensure all pages that were not
added to the bio have their reference released.
Since this essentially requires doing the same that bio_put_pages(), and
there was only one caller for that function, this patch makes the
put_page() loop common for everyone.
Fixes: b1a000d3b8 ("block: relax direct io memory alignment")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220712153256.2202024-3-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adding the page could fail on the bio_full() condition, which checks for
either exceeding the bio's max segments or total size exceeding
UINT_MAX. We already ensure the max segments can't be exceeded, so just
ensure the total size won't reach the limit. This simplifies error
handling and removes unnecessary repeated bio_full() checks.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220712153256.2202024-2-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are cases where a bio may not accept additional pages, and the iov
needs to advance to the last data length that was accepted. The zone
append used to handle this correctly, but was inadvertently broken when
the setup was made common with the normal r/w case.
Fixes: 576ed91354 ("block: use bio_add_page in bio_iov_iter_get_pages")
Fixes: c58c0074c5 ("block/bio: remove duplicate append pages code")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220712153256.2202024-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow using the splitting helpers on just a queue_limits instead of
a full request_queue structure. This will eventually allow file systems
or remapping drivers to split REQ_OP_ZONE_APPEND bios based on limits
calculated as the minimum common capabilities over multiple devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move this helper into the only file where it is used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for reusing blk_bio_segment_split for (file system controlled)
splits of REQ_OP_ZONE_APPEND bios by letting the caller control the
maximum size of the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only non-passthrough requests are split by the block layer and use the
->bio_split bio_set. Move it from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLko3gQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpmQaD/90NKFj4v8I456TUQyg1jimXEsL+e84E6o2
ALWVb6JzQvlPVQXNLnK5YKIunMWOTtTMz0nyB8sVRwVJVJO0P5d7QopAkZM8fkyU
MK5OCzoryENw4DTc2wJS4in6cSbGylIuN74wMzlf7+M67JTImfoZQhbTMcjwzZfn
b3OlL6sID7zMXwGcuOJPZyUJICCpDhzdSF9JXqKma5PQuG2SBmQyvFxJAcsoFBPc
YetnoRIOIN6yBvsIZaPaYq7XI9MIvF0e67EQtyCEHj4tHpyVnyDWkeObVFULsISU
gGEKbkYPvNUzRAU5Q1NBBHh1tTfkf/MaUxTuZwoEwZ/s04IGBGMmrZGyfvdfzYo6
M7NwSEg/TrUSNfTwn65mQi7uOXu1pGkJrqz84Flm8u9Qid9Vd7LExLG5p/ggnWdH
5th93MDEmtEg29e9DXpEAuS5d0t3TtSvosflaKpyfNNfr+P0rWCN6GM/uW62VUTK
ls69SQh/AQJRbg64jU4xper6WhaYtSXK7TKEnxJycoEn9gYNyCcdot2uekth0xRH
ChHGmRlteiqe/y4uFWn/2dcxWjoleiHbFjTaiRL75WVl8wIDEjw02LGuoZ61Ss9H
WOV+MT7KqNjBGe6lreUY+O/PO02dzmoR6heJXN19p8zr/pBuLCTGX7UpO7rzgaBR
4N1HEozvIw==
=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This relatively straightforward converion saves a call to compound_head()
hidden inside put_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The bare use of '9' confuses some people. We also don't need this cast,
since the compiler does exactly that cast for us.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Set p->v to NULL if we try to read beyond the end of the disk, just like
we do if we get an error returned from trying to read the disk.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
That rather complicated expression is just trying to find the offset
of this sector within a page, and there are easier ways to express that.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
__blk_get_queue is only called by blk_get_queue, so merge the two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220721063432.1714609-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To undo the all initialization from blk_mq_init_allocated_queue in case
of a probe failure where add_disk is never called we have to call
blk_mq_exit_queue from put_disk.
This relies on the fact that drivers always call blk_mq_free_tag_set
after calling put_disk in the probe error path if they have a gendisk
at all.
We should be doing this in general, but can't do it for the normal
teardown case (yet) as the tagset can be gone by the time the disk is
released once it was added. I hope to sort this out properly eventually
but for now this isolated hack will do it.
Fixes: 6f8191fdf4 ("block: simplify disk shutdown")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220720130541.1323531-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To fully clean up the queue if the disk allocation fails we need to
call blk_mq_destroy_queue and not just blk_put_queue.
Fixes: 6f8191fdf4 ("block: simplify disk shutdown")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220720130541.1323531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In our test of iocost, we encountered some list add/del corruptions of
inner_walk list in ioc_timer_fn.
The reason can be described as follows:
cpu 0 cpu 1
ioc_qos_write ioc_qos_write
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
...
rq_qos_add(q, rqos);
}
...
rq_qos_add(q, rqos);
...
}
When the io.cost.qos file is written by two cpus concurrently, rq_qos may
be added to one disk twice. In that case, there will be two iocs enabled
and running on one disk. They own different iocgs on their active list. In
the ioc_timer_fn function, because of the iocgs from two iocs have the
same root iocg, the root iocg's walk_list may be overwritten by each other
and this leads to list add/del corruptions in building or destroying the
inner_walk list.
And so far, the blk-rq-qos framework works in case that one instance for
one type rq_qos per queue by default. This patch make this explicit and
also fix the crash above.
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220720093616.70584-1-hanjinke.666@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for arguments that represent a bitwise
combination of a request operation and request flags. Rename those
arguments from 'op' into 'opf'.
This patch does not change any functionality.
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-10-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for an argument that represents a bitwise
combination of a request operation and request flags. Rename that
argument from 'op' into 'opf'.
This patch does not change any functionality.
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-9-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for arguments and variables that represent
request flags or a bitwise combination of a request operation and
request flags. Rename those variables from 'op' into 'opf'.
This patch does not change any functionality.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-8-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for arguments and variables that represent
request flags or a bitwise combination of a request operation and
request flags. Rename the function arguments and also a structure member
that hold a request operation and flags from 'rw' into 'opf'.
This patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-7-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by changing the type of the value returned by
req_op() and bio_op() from unsigned int into enum req_op. Insert
'default: break;' in switch statements on the enum req_op type to prevent
that the compiler warns about these switch statements.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the type of the arguments that are used to pass a REQ_OP_* value
from int or unsigned int into enum req_op to improve static type
checking.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 513616843d ("block: remove superfluous calls to
blkcg_bio_issue_init") has removed blkcg_bio_issue_init from
__bio_clone since submit_bio will override ->bi_issue.
However, __blk_queue_split is called after blkcg_bio_issue_init
(see blk_mq_submit_bio) in submit_bio. In this case, the
->bi_issue is 0. Fix it.
Fixes: 513616843d ("block: remove superfluous calls to blkcg_bio_issue_init")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220713140226.68135-1-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the remaining calls of bdevname with snprintf using the %pg
format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the %pg format specifier instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the %pg format specifier instead. Also reformat the
printk statement to be more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in blkcg_unuse_delay, blkcg_set_delay and blkcg_clear_delay and
atomic64_try_cmpxchg in blkcg_scale_delay. x86 CMPXCHG instruction
returns success in ZF flag, so this change saves a compare after cmpxchg
(and related move instruction in front of cmpxchg).
Also, atomic_try_cmpxchg implicitly assigns old *ptr value to "old" when
cmpxchg fails, enabling further code simplifications.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220712154455.66868-1-ubizjak@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in check_scale_change and atomic64_try_cmpxchg in blkcg_iolatency_done_bio.
x86 CMPXCHG instruction returns success in ZF flag, so this change saves a
compare after cmpxchg (and related move instruction in front of cmpxchg).
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220712151947.6783-1-ubizjak@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
update_io_ticks. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related
move instruction in front of cmpxchg).
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220712152741.7324-1-ubizjak@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old in
atomic_inc_below. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg).
Also, atomic_try_cmpxchg implicitly assigns old *ptr value to "old" when
cmpxchg fails, enabling further code simplifications.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220712150547.5786-1-ubizjak@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_debugfs_register_hctx() can be called by blk_mq_update_nr_hw_queues
when gendisk isn't added yet, such as nvme tcp.
Fixes the warning of 'debugfs: Directory 'hctx0' with parent '/' already present!'
which can be observed reliably when running blktests nvme/005.
Fixes: 6cfc0081b0 ("blk-mq: no need to check return value of debugfs_create functions")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220711090808.259682-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig
Keith Busch
Tejun Heo
Linus Torvalds
Paul E. McKenney
Jens Axboe
Yu Kuai
Steven Rostedt (Google)
Ming Lei
Yuwei Guan
Jiri Slaby (SUSE)
Luca Boccassi
Kemeng Shi
Christoph Hellwig
Greg Kroah-Hartman
Yang Li
Tianjia Zhang
Randy Dunlap
Jan Kara
Jinlong Chen
Damien Le Moal
Ye Bin
Bart Van Assche
Shin'ichiro Kawasaki
Waiman Long
Pavel Begunkov
Chris Mason
Khazhismel Kumykov
Logan Gunthorpe
Serge Semin
Chao Leng
Al Viro
Chen Jun
Chen Zhongjin
David Jeffery
John Garry
Jason A. Donenfeld
Deming Wang
Alexander Potapenko
Kanchan Joshi
Anuj Gupta
Pankaj Raghav
Liu Song
Li Jinlin
Li zeming
Ping-Xiang Chen
Mikulas Patocka
Stefan Roesch
Eric Biggers
Miaohe Lin
Jiapeng Chong
Michal Koutný
dougmill@linux.vnet.ibm.com
Yufen Yu
Rafael Mendonca
Matthew Wilcox (Oracle)
Jinke Han
Muchun Song
Uros Bizjak