Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
Patch series "mm: Page fault accounting cleanups", v5.
This is v5 of the pf accounting cleanup series. It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):
https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/
What this series did:
- Correct page fault accounting: we do accounting for a page fault
(no matter whether it's from #PF handling, or gup, or anything else)
only with the one that completed the fault. For example, page fault
retries should not be counted in page fault counters. Same to the
perf events.
- Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
event is used in an adhoc way across different archs.
Case (1): for many archs it's done at the entry of a page fault
handler, so that it will also cover e.g. errornous faults.
Case (2): for some other archs, it is only accounted when the page
fault is resolved successfully.
Case (3): there're still quite some archs that have not enabled
this perf event.
Since this series will touch merely all the archs, we unify this
perf event to always follow case (1), which is the one that makes most
sense. And since we moved the accounting into handle_mm_fault, the
other two MAJ/MIN perf events are well taken care of naturally.
- Unify definition of "major faults": the definition of "major
fault" is slightly changed when used in accounting (not
VM_FAULT_MAJOR). More information in patch 1.
- Always account the page fault onto the one that triggered the page
fault. This does not matter much for #PF handlings, but mostly for
gup. More information on this in patch 25.
Patchset layout:
Patch 1: Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23: Enable the new accounting for arch #PF handlers one by one.
Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25: Cleanup GUP task_struct pointer since it's not needed any more
This patch (of 25):
This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault(). This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events. To
do this, the pt_regs pointer is passed into handle_mm_fault().
PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.
So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IRQ bypass support for vdpa and IFC
MLX5 vdpa driver
Endian-ness fixes for virtio drivers
Misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8yVEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNPEH/0Dtq1s1V4r/kxtLUoMophv9wuORpWCr98BQ
2aOveTmwTOVdZVOiw2tzTgO9nbWx+cL2HvkU7Aajfpz5hh93Z2VOo2n4a7hBC79f
rlc3GXiG+pMk5RfmqGofIHTU+D6ony4D5SXlUDurLdtEwunyuqZwABiWkZjdclZJ
bv90IL8Upzbz0rxYr7k3z8UepdOCt7r4QS/o7STHZBjJRyylxmO/R2yTnh6PtpRK
Q/z35wJBJ3SKc8X3Fi0VOOSeGNZOiypkkl9ZnLVY5lExNAU1+2MMn2UK119SlCDV
MSxb7quYFF4cksXH1g77GMBNi1uADRh1dtFMZdkKhZGljGxKLxo=
=6VTZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8xmPYTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoTuQEACyzQCjU8PgehPp9oMqWzaX2fcVyuZO
QU2yw6gmz2oTz3ZHUNwdW8UnzGh2OWosK3kDruoD9FtSS51lER1/ISfSPCGfyqxC
KTjOcB1Kvxwq/3LcCx7Zi3ZxWApat74qs3EhYhKtEiQ2Y9xv9rLq8VV1UWAwyxq0
eHpjlIJ6b6rbt+ARslaB7drnccOsdK+W/roNj4kfyt+gezjBfojGRdMGQNMFcpnv
shuTC+vYurAVIiVA/0IuizgHfwZiXOtVpjVoEWaxg6bBH6HNuYMYzdSa/YrlDkZs
n/aBI/Xkvx+Eacu8b1Zwmbzs5EnikUK/2dMqbzXKUZK61eV4hX5c2xrnr1yGWKTs
F/juh69Squ7X6VZyKVgJ9RIccVueqwR2EprXWgH3+RMice5kjnXH4zURp0GHALxa
DFPfB6fawcH3Ps87kcRFvjgm6FBo0hJ1AxmsW1dY4ACFB9azFa2euW+AARDzHOy2
VRsUdhL9CGwtPjXcZ/9Rhej6fZLGBXKr8uq5QiMuvttp4b6+j9FEfBgD4S6h8csl
AT2c2I9LcbWqyUM9P4S7zY/YgOZw88vHRuDH7tEBdIeoiHfrbSBU7EQ9jlAKq/59
f+Htu2Io281c005g7DEeuCYvpzSYnJnAitj5Lmp/kzk2Wn3utY1uIAVszqwf95Ul
81ppn2KlvzUK8g==
=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The APIC headers are relatively complex and bring in additional
header dependencies - while smp.h is a relatively simple header
included from high level headers.
Remove the dependency and add in the missing #include's in .c
files where they gained it indirectly before.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
that helps the debugging of IRQ affinity logic bugs, and fix a memory leak.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oKU9
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Fix a recent IRQ affinities regression, add in a missing debugfs
printout that helps the debugging of IRQ affinity logic bugs, and fix
a memory leak"
* tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/debugfs: Add missing irqchip flags
genirq/affinity: Make affinity setting if activated opt-in
irqdomain/treewide: Free firmware node after domain removal
- Removal of the tremendously unpopular read_barrier_depends() barrier,
which is a NOP on all architectures apart from Alpha, in favour of
allowing architectures to override READ_ONCE() and do whatever dance
they need to do to ensure address dependencies provide LOAD ->
LOAD/STORE ordering. This work also offers a potential solution if
compilers are shown to convert LOAD -> LOAD address dependencies into
control dependencies (e.g. under LTO), as weakly ordered architectures
will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the device
ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions and
kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words.
-----BEGIN PGP SIGNATURE-----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=mh79
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
- Move Arm SMMU driver files into their own subdirectory
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl8ewXgQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNGfuB/wMYzwgDotb0nggknPfm/TEcucjdN6ClXqN
9YUCslL1ggSLNHIZYSXkLQ5wwPnIg/vFIoU5ishOLT4YumW0Abck0ARfuJOV87GV
CO7h1iTS4fAxQarvtrjQmxYgNwlMI3+fKzNoQ/F9YP+v/2gUeuiPZibjyEtnc5jK
S6yLvrvQRBCmDVXtnI0/RdXbBqF4SU1RgI16bq2TbKvj8NmiEtIZjY7VxDNHKOMW
BpOw1r8Cl1K3uvgnkZzkOQPTvolgNpdXF3ZzyK219oN2FufD85w/g3LS00NuNwRc
c72TP4SksXTvRz/XiFvfAuskXQI2j2hg1k3XMPeB7pbJnzO67DYf
=chZm
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into next
More Arm SMMU updates for 5.9
- Move Arm SMMU driver files into their own subdirectory
Move AMD Kconfig and Makefile bits down into the amd directory
with the rest of the AMD specific files.
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200630200636.48600-3-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move Intel Kconfig and Makefile bits down into intel directory
with the rest of the Intel specific files.
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200630200636.48600-2-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Devices sitting on proprietary busses have a device ID space that
is owned by the respective bus and related firmware bindings. In order
to let the generic OF layer handle the input translations to
an IOMMU id, for such busses the current of_dma_configure() interface
should be extended in order to allow the bus layer to provide the
device input id parameter - that is retrieved/assigned in bus
specific code and firmware.
Augment of_dma_configure() to add an optional input_id parameter,
leaving current functionality unchanged.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is nothing PCI specific (other than the RID - requester ID)
in the of_map_rid() implementation, so the same function can be
reused for input/output IDs mapping for other busses just as well.
Rename the RID instances/names to a generic "id" tag.
No functionality change intended.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200619082013.13661-7-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Arm SMMU drivers are getting fat on vendor value-add, so move them
to their own subdirectory out of the way of the other IOMMU drivers.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will@kernel.org>
For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and
the PRI Capability is allowed for PFs but not for VFs. Searching for the
PRI Capability on a VF always fails, even if its associated PF supports
PRI.
Add pci_pri_supported() to check whether device or its associated PF
supports PRI.
[bhelgaas: commit log, avoid "!!"]
Fixes: b16d0cb9e2 ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS")
Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org # v4.4+
The VT-d spec requires (10.4.4 Global Command Register, TE field) that:
Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before completing
the translation enable command and reflecting the status of the command
through the TES field in the Global Status register.
Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.
This provides a quirk list for those devices and skips TE disabling if
the qurik hits.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206571
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Koba Ko <koba.ko@canonical.com>
Tested-by: Jun Miao <jun.miao@windriver.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723013437.2268-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now the ARM page tables are always allocated by GFP_ATOMIC parameter,
but the iommu_ops->map() function has been added a gfp_t parameter by
commit 781ca2de89 ("iommu: Add gfp parameter to iommu_ops::map"),
thus io_pgtable_ops->map() should use the gfp parameter passed from
iommu_ops->map() to allocate page pages, which can avoid wasting the
memory allocators atomic pools for some non-atomic contexts.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/3093df4cb95497aaf713fca623ce4ecebb197c2e.1591930156.git.baolin.wang@linux.alibaba.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After page requests are handled, software must respond to the device
which raised the page request with the result. This is done through
the iommu ops.page_response if the request was reported to outside of
vendor iommu driver through iommu_report_device_fault(). This adds the
VT-d implementation of page_response ops.
Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-developed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A pasid might be bound to a page table from a VM guest via the iommu
ops.sva_bind_gpasid. In this case, when a DMA page fault is detected
on the physical IOMMU, we need to inject the page fault request into
the guest. After the guest completes handling the page fault, a page
response need to be sent back via the iommu ops.page_response().
This adds support to report a page request fault. Any external module
which is interested in handling this fault should regiester a notifier
with iommu_register_device_fault_handler().
Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-developed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are several places in the code that need to get the pointers of
svm and sdev according to a pasid and device. Add a helper to achieve
this for code consolidation and readability.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is refactored in two ways:
- Make it global so that it could be used in other files.
- Make bus/devfn optional so that callers could ignore these two returned
values when they only want to get the coresponding iommu pointer.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For the unlikely use case where multiple aux domains from the same pdev
are attached to a single guest and then bound to a single process
(thus same PASID) within that guest, we cannot easily support this case
by refcounting the number of users. As there is only one SL page table
per PASID while we have multiple aux domains thus multiple SL page tables
for the same PASID.
Extra unbinding guest PASID can happen due to race between normal and
exception cases. Termination of one aux domain may affect others unless
we actively track and switch aux domains to ensure the validity of SL
page tables and TLB states in the shared PASID entry.
Support for sharing second level PGDs across domains can reduce the
complexity but this is not available due to the limitations on VFIO
container architecture. We can revisit this decision once sharing PGDs
are available.
Overall, the complexity and potential glitch do not warrant this unlikely
use case thereby removed by this patch.
Fixes: 56722a4398 ("iommu/vt-d: Add bind guest PASID support")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For guest requested IOTLB invalidation, address and mask are provided as
part of the invalidation data. VT-d HW silently ignores any address bits
below the mask. SW shall also allow such case but give warning if
address does not align with the mask. This patch relax the fault
handling from error to warning and proceed with invalidation request
with the given mask.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For guest SVA usage, in order to optimize for less VMEXIT, guest request
of IOTLB flush also includes device TLB.
On the host side, IOMMU driver performs IOTLB and implicit devTLB
invalidation. When PASID-selective granularity is requested by the guest
we need to derive the equivalent address range for devTLB instead of
using the address information in the UAPI data. The reason for that is,
unlike IOTLB flush, devTLB flush does not support PASID-selective
granularity. This is to say, we need to set the following in the PASID
based devTLB invalidation descriptor:
- entire 64 bit range in address ~(0x1 << 63)
- S bit = 1 (VT-d CH 6.5.2.6).
Without this fix, device TLB flush range is not set properly for PASID
selective granularity. This patch also merged devTLB flush code for both
implicit and explicit cases.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Address information for device TLB invalidation comes from userspace
when device is directly assigned to a guest with vIOMMU support.
VT-d requires page aligned address. This patch checks and enforce
address to be page aligned, otherwise reserved bits can be set in the
invalidation descriptor. Unrecoverable fault will be reported due to
non-zero value in the reserved bits.
Fixes: 61a06a16e3 ("iommu/vt-d: Support flushing more translation cache types")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DevTLB flush can be used for both DMA request with and without PASIDs.
The former uses PASID#0 (RID2PASID), latter uses non-zero PASID for SVA
usage.
This patch adds a check for PASID value such that devTLB flush with
PASID is used for SVA case. This is more efficient in that multiple
PASIDs can be used by a single device, when tearing down a PASID entry
we shall flush only the devTLB specific to a PASID.
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 711419e504 ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a4 fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.
The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.
Add the missing free operations after domain removal where where appropriate.
Fixes: e3beca48a4 ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
The device may be torn down, but the domain should still be valid. Lets
use that as the tlb flush ops cookie.
Fixes a problem reported in [1]
[1] https://lkml.org/lkml/2020/7/20/104
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 09b5dfff9a ("iommu/qcom: Use accessor functions for iommu private data")
Link: https://lore.kernel.org/r/20200720155217.274994-1-robdclark@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The sparse tool complains as follows:
drivers/iommu/iommu.c:386:5: warning:
symbol 'iommu_insert_resv_region' was not declared. Should it be static?
drivers/iommu/iommu.c:2182:5: warning:
symbol '__iommu_map' was not declared. Should it be static?
Those functions are not used outside of iommu.c, so mark them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200713142542.50294-1-weiyongjun1@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is possible for the call to omap_iommu_dump_ctx to return
a negative error number, so check for the failure and return
the error number rather than pass the negative value to
simple_read_from_buffer.
Fixes: 14e0e6796a ("OMAP: iommu: add initial debugfs support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200714192211.744776-1-colin.king@canonical.com
Addresses-Coverity: ("Improper use of negative value")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The name "update_pte" is a little too generic, and can end up clashing
with architecture pagetable code leaked out of common mm headers. Rename
it to something more appropriately namespaced.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/829bb5dc18e734870b75db673ddce86e7e37fc73.1594727968.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add an entry for r8a77961 in soc_rcar_gen3[] list so that we dont
enable iommu unconditionally.
Fixes: 17fe161816 ("iommu/renesas: Add support for r8a77961")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1594722055-9298-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add global/context fault hooks to allow vendor specific implementations
override default fault interrupt handlers.
Update NVIDIA implementation to override the default global/context fault
interrupt handlers and handle interrupts across the two ARM MMU-500s that
are programmed identically.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20200718193457.30046-6-vdumpa@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
NVIDIA's Tegra194 SoC has three ARM MMU-500 instances.
It uses two of the ARM MMU-500s together to interleave IOVA
accesses across them and must be programmed identically.
This implementation supports programming the two ARM MMU-500s
that must be programmed identically.
The third ARM MMU-500 instance is supported by standard
arm-smmu.c driver itself.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20200718193457.30046-4-vdumpa@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
ioremap smmu mmio region before calling into implementation init.
This is necessary to allow mapped address available during vendor
specific implementation init.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20200718193457.30046-3-vdumpa@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Move TLB timeout and spin count macros to header file to
allow using the same from vendor specific implementations.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20200718193457.30046-2-vdumpa@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
- Make the handling of the firmware node consistent and do not free the
node after the domain has been created successfully. The core code
stores a pointer to it which can lead to a use after free or double
free.
This used to "work" because the pointer was not stored when the initial
code was written, but at some point later it was required to store
it. Of course nobody noticed that the existing users break that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled. When interrupts are inactive with
the modern hierarchical irqdomain design, the interrupt chips are not
necessarily in a state where affinity changes can be handled. The legacy
irq chip design allowed this because interrupts are immediately fully
initialized at allocation time. X86 has a hacky workaround for this, but
other implementations do not. This cased malfunction on GIC-V3. Instead
of playing whack a mole to find all affected drivers, change the core
code to store the requested affinity setting and then establish it when
the interrupt is allocated, which makes the X86 hack go away.
-----BEGIN PGP SIGNATURE-----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=elM3
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Due to erratum #582743, the Marvell Armada-AP806 can't access 64bit to
ARM SMMUv2 registers.
Provide implementation relevant hooks:
- split the writeq/readq to two accesses of writel/readl.
- mask the MMU_IDR2.PTFSv8 fields to not use AArch64 format (but
only AARCH32_L) since with AArch64 format 32 bits access is not supported.
Note that most 64-bit registers like TTBRn can be accessed as two 32-bit
halves without issue, and AArch32 format ensures that the register writes
which must be atomic (for TLBI etc.) need only be 32-bit.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200715070649.18733-3-tn@semihalf.com
Signed-off-by: Will Deacon <will@kernel.org>
'cfg_probe' hook is called at the very end of configuration probing
procedure and therefore features override and workaround may become
complex like for ID register fixups. In preparation for adding Marvell
errata move 'cfg_probe' a bit earlier to have chance to adjust
the detected features before we start consuming them.
Since the Cavium quirk (the only user) does not alter features
it is safe to do so.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200715070649.18733-2-tn@semihalf.com
Signed-off-by: Will Deacon <will@kernel.org>
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200708210434.22518-1-grandmaster@al2klimov.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The MMU_CTRL register of MT8173 is different from other SoCs.
The in_order_wr_en is bit[9] which is zero by default.
Other SoCs have the vitcim_tlb_en feature mapped to bit[12].
This bit is set to one by default. We need to preserve the bit
when setting F_MMU_TF_PROT_TO_PROGRAM_ADDR as otherwise the
bit will be cleared and IOMMU performance will drop.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200703044127.27438-10-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Starting with mt6779, iommu needs to extend to 256 bytes from 128
bytes which can send the max number of data for memory protection
pa alignment. So we can use a separate patch to modify it.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200703044127.27438-9-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some platforms(ex: mt6779) need to improve performance by setting
REG_MMU_WR_LEN_CTRL register. And we can use WR_THROT_EN macro to control
whether we need to set the register. If the register uses default value,
iommu will send command to EMI without restriction, when the number of
commands become more and more, it will drop the EMI performance. So when
more than ten_commands(default value) don't be handled for EMI, iommu will
stop send command to EMI for keeping EMI's performace by enabling write
throttling mechanism(bit[5][21]=0) in MMU_WR_LEN_CTRL register.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200703044127.27438-8-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The max larb number that a iommu HW support is 8(larb0~larb7 in the below
diagram).
If the larb's number is over 8, we use a sub_common for merging
several larbs into one larb. At this case, we will extend larb_id:
bit[11:9] means common-id;
bit[8:7] means subcommon-id;
>From these two variables, we could get the real larb number when
translation fault happen.
The diagram is as below:
EMI
|
IOMMU
|
-----------------
| |
common1 common0
| |
-----------------
|
smi common
|
------------------------------------
| | | | | |
3'd0 3'd1 3'd2 3'd3 ... 3'd7 <-common_id(max is 8)
| | | | | |
Larb0 Larb1 | Larb3 ... Larb7
|
smi sub common
|
--------------------------
| | | |
2'd0 2'd1 2'd2 2'd3 <-sub_common_id(max is 4)
| | | |
Larb8 Larb9 Larb10 Larb11
In this patch we extend larb_remap[] to larb_remap[8][4] for this.
larb_remap[x][y]: x means common-id above, y means subcommon_id above.
We can also distinguish if the M4U HW has sub_common by HAS_SUB_COMM
macro.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200703044127.27438-7-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For mt6779, MMU_INV_SEL register's offset is changed from
0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
use it.
In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
before mt6779.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200703044127.27438-6-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add F_MMU_IN_ORDER_WR_EN_MASK and F_MMU_STANDARD_AXI_MODE_EN_MASK
definitions in MISC_CTRL register.
F_MMU_STANDARD_AXI_MODE_EN_MASK:
If we set F_MMU_STANDARD_AXI_MODE_EN_MASK (bit[3][19] = 0, not follow
standard AXI protocol), the iommu will priorize sending of urgent read
command over a normal read command. This improves the performance.
F_MMU_IN_ORDER_WR_EN_MASK:
If we set F_MMU_IN_ORDER_WR_EN_MASK (bit[1][17] = 0, out-of-order write),
the iommu will re-order write commands and send the write commands with
higher priority. Otherwise the sending of write commands will be done in
order. The feature is controlled by OUT_ORDER_WR_EN platform data flag.
Suggested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200703044127.27438-5-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Given the fact that we are adding more and more plat_data bool values,
it would make sense to use a u32 flags register and add the appropriate
macro definitions to set and check for a flag present.
No functional change.
Suggested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200703044127.27438-4-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For iommu offset=0x48 register, only the previous mt8173/mt8183 use the
name STANDARD_AXI_MODE, all the latest SoC extend the register more
feature by different bits, for example: axi_mode, in_order_en, coherent_en
and so on. So rename REG_MMU_MISC_CTRL may be more proper.
This patch only rename the register name, no functional change.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200703044127.27438-3-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This driver shouldn't need anything architecture-specific (that isn't
under CONFIG_ARM protection already), and has already been accessible
from certain x86 configurations by virtue of the previously-cleaned-up
"ARM || IOMMU_DMA" dependency. Allow COMPILE_TEST for all architectures.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1fe2006aa98f008a2e689adba6e8c96e9197f903.1593791968.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Wacky COMPILE_TEST dependencies based on who used to define
dev_archdata.iommu can go.
Dependencies on ARM or ARM64 already implied by the ARCH_* platform
selection can go.
The entire IOMMU_SUPPORT menu already depends on MMU, so those can go.
IOMMU_DMA is for the architecture's DMA API implementation to choose,
and its interface to IOMMU drivers is properly stubbed out if disabled,
so dependencies on or selections of that can go (AMD_IOMMU is the
current exception since the x86 drivers have to provide their own entire
dma_map_ops implementation).
Since commit ed6ccf10f2 ("dma-mapping: properly stub out the DMA API
for !CONFIG_HAS_DMA"), drivers which simply use the dma-mapping API
should not need to depend on HAS_DMA, so those can go.
And a long-dead option for code removed from the MSM driver 4 years ago
can also go.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7fb9c74dc6bd12a4619ca44c92408e91352f1be0.1593791968.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When CONFIG_OF=n of_match_device() gets pre-processed out of existence
leaving qcom-smmu_client_of_match unused. Mark it as possibly unused to
keep the compiler from warning in that case.
Fixes: 0e764a0101 ("iommu/arm-smmu: Allow client devices to select direct mapping")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200604203905.31964-1-jcrouse@codeaurora.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the qcom implementation for IOMMU hardware on sm8150 and sm8250 SoCs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200609194030.17756-3-jonathan@marek.ca
Signed-off-by: Will Deacon <will@kernel.org>
The IOMMU_SYS_CACHE_ONLY flag was never exposed via the DMA API and
has no in-tree users. Remove it.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Isaac J. Manjarres" <isaacm@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
At least the version in the header file to fix a compile warning about
the function being unused.
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200630124611.23153-1-joro@8bytes.org
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config):
drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap':
dma-iommu.c:(.text+0x92e): undefined reference to `dma_pgprot'
IOMMU_DMA must not be selected, unless HAS_DMA=y.
Hence fix this by making SUN50I_IOMMU depend on HAS_DMA.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200629121146.24011-1-geert@linux-m68k.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pte_dma variable in the unmap callback is set but never used. Remove
it.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200628180844.79205-2-maxime@cerno.tech
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The flush_all_tlb call back can be called from an atomic context, so using
readl_poll_timeout that embeds a udelay doesn't work.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200628180844.79205-1-maxime@cerno.tech
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu private pointer is already used in the Mediatek IOMMU v1
driver, so move the dma_iommu_mapping pointer into 'struct
mtk_iommu_data' and do not use dev->archdata.iommu anymore.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-9-joro@8bytes.org
Remove the use of dev->archdata.iommu_domain and use the private
per-device pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-8-joro@8bytes.org
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-7-joro@8bytes.org
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-6-joro@8bytes.org
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-5-joro@8bytes.org
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200625130836.1916-4-joro@8bytes.org
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200625130836.1916-2-joro@8bytes.org
Do not call atomic64_set() directly to update the domain page-table
root and use two new helper functions.
This makes it easier to implement additional work necessary when
the page-table is updated.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200626080547.24865-2-joro@8bytes.org
Currently, Linux logs the two messages below.
[ 0.979142] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.979546] PPR NX GT IA GA PC GA_vAPIC
The log level of these lines differs though. The first one has level
*info*, while the second has level *warn*, which is confusing.
$ dmesg -T --level=info | grep "Extended features"
[Tue Jun 16 21:46:58 2020] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
$ dmesg -T --level=warn | grep "PPR"
[Tue Jun 16 21:46:58 2020] PPR NX GT IA GA PC GA_vAPIC
The problem is, that commit 3928aa3f57 ("iommu/amd: Detect and enable
guest vAPIC support") introduced a newline, causing `pr_cont()`, used to
print the features, to default back to the default log level.
/**
* pr_cont - Continues a previous log message in the same line.
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_CONT loglevel. It should only be
* used when continuing a log message with no newline ('\n') enclosed. Otherwise
* it defaults back to KERN_DEFAULT loglevel.
*/
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
So, remove the line break, so only one line is logged.
Fixes: 3928aa3f57 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20200616220420.19466-1-pmenzel@molgen.mpg.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some PCIe devices do not expect a PASID value in PRI Page Responses.
If the "PRG Response PASID Required" bit in the PRI capability is zero,
then the OS should not set the PASID field. Similarly on Arm SMMU,
responses to stall events do not have a PASID.
Currently iommu_page_response() systematically checks that the PASID in
the page response corresponds to the one in the page request. This can't
work with virtualization because a page response coming from a guest OS
won't have a PASID if the passed-through device does not require one.
Add a flag to page requests that declares whether the corresponding
response needs to have a PASID. When this flag isn't set, allow page
responses without PASID.
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200616144712.748818-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use kzfree() instead of opencoded memset with 0 followed by kfree().
Null check is not required since kzfree() checks for NULL internally.
Signed-off-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20200604123709.96561-1-efremov@linux.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Unlike the other instances which represent a complete loss of
consistency within the rcache mechanism itself, or a fundamental
and obvious misconfiguration by an IOMMU driver, the BUG_ON() in
iova_magazine_free_pfns() can be provoked at more or less any time
in a "spooky action-at-a-distance" manner by any old device driver
passing nonsense to dma_unmap_*() which then propagates through to
queue_iova().
Not only is this well outside the IOVA layer's control, it's also
nowhere near fatal enough to justify panicking anyway - all that
really achieves is to make debugging the offending driver more
difficult. Let's simply WARN and otherwise ignore bogus PFNs.
Reported-by: Prakash Gupta <guptap@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Prakash Gupta <guptap@codeaurora.org>
Link: https://lore.kernel.org/r/acbd2d092b42738a03a21b417ce64e27f8c91c86.1591103298.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_domain_identity_map() helper takes start/end PFN as arguments.
Fix a misuse case where the start and end addresses are passed.
Fixes: e70b081c6f ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.
Fixes: 765b6a98c1 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PCI ACS is disabled if Intel IOMMU is off by default or intel_iommu=off
is used in command line. Unfortunately, Intel IOMMU will be forced on if
there're devices sitting on an external facing PCI port that is marked
as untrusted (for example, thunderbolt peripherals). That means, PCI ACS
is disabled while Intel IOMMU is forced on to isolate those devices. As
the result, the devices of an MFD will be grouped by a single group even
the ACS is supported on device.
[ 0.691263] pci 0000:00:07.1: Adding to iommu group 3
[ 0.691277] pci 0000:00:07.2: Adding to iommu group 3
[ 0.691292] pci 0000:00:07.3: Adding to iommu group 3
Fix it by requesting PCI ACS when Intel IOMMU is detected with platform
opt in hint.
Fixes: 89a6079df7 ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Co-developed-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, an external malicious PCI device can masquerade the VID:PID
of faulty gfx devices, and thus apply iommu quirks to effectively
disable the IOMMU restrictions for itself.
Thus we need to ensure that the device we are applying quirks to, is
indeed an internal trusted device.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current Intel SVM is designed by setting the pgd_t of the processor page
table to FLPTR field of the PASID entry. The first level translation only
supports 4 and 5 level paging structures, hence it's infeasible for the
IOMMU to share a processor's page table when it's running in 32-bit mode.
Let's disable 32bit support for now and claim support only when all the
missing pieces are ready in the future.
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Move the Intel and AMD IOMMU drivers into their own
subdirectory. Both drivers consist of several files by now and
giving them their own directory unclutters the IOMMU top-level
directory a bit.
-----BEGIN PGP SIGNATURE-----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=gX8z
-----END PGP SIGNATURE-----
Merge tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu driver directory structure cleanup from Joerg Roedel:
"Move the Intel and AMD IOMMU drivers into their own subdirectory.
Both drivers consist of several files by now and giving them their own
directory unclutters the IOMMU top-level directory a bit"
* tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Move Intel IOMMU driver into subdirectory
iommu/amd: Move AMD IOMMU driver into subdirectory
Move all files related to the Intel IOMMU driver into its own
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200609130303.26974-3-joro@8bytes.org
Move all files related to the AMD IOMMU driver into its own
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200609130303.26974-2-joro@8bytes.org
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the
pdev->no_vf_scan flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio
and qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
=VhXR
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the pdev->no_vf_scan
flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio and
qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
vfio-ccw: make vfio_ccw_regops variables declarations static
vfio-ccw: Add trace for CRW event
vfio-ccw: Wire up the CRW irq and CRW region
vfio-ccw: Introduce a new CRW region
vfio-ccw: Refactor IRQ handlers
vfio-ccw: Introduce a new schib region
vfio-ccw: Refactor the unregister of the async regions
vfio-ccw: Register a chp_event callback for vfio-ccw
vfio-ccw: Introduce new helper functions to free/destroy regions
vfio-ccw: document possible errors
vfio-ccw: Enable transparent CCW IPL from DASD
s390/pci: Log new handle in clp_disable_fh()
s390/cio, s390/qeth: cleanup PNSO CHSC
s390/qdio: remove q->first_to_kick
s390/qdio: fix up qdio_start_irq() kerneldoc
s390: remove critical section cleanup from entry.S
s390: add machine check SIGP
s390/pci: ioremap() align with generic code
s390/ap: introduce new ap function ap_get_qdev()
Documentation/s390: Update / remove developerWorks web links
...
Including:
- A big part of this is a change in how devices get connected to
IOMMUs in the core code. It contains the change from the old
add_device()/remove_device() to the new
probe_device()/release_device() call-backs. As a result
functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group
allocation for each device.
The reason for this change was to get more robust allocation
of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into
the IOMMU tree, but there are no known bugs left. The last fix
is applied on-top of the merge commit for the topic branches.
- Removal of the driver private domain handling in the Intel
VT-d driver. This was fragile code and I am glad it is gone
now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the
Intel VT-d driver
- Replacement of the Intel SVM interfaces to the common
IOMMU SVA API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that
it can be claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain
type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by
Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of
IOMMU core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=a4z4
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl7bvTULHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMJVhAAgTiWNzxPJhM6RTeRooM6W0NvcZGTJT6ExyJghaau
aJvHUjXPrRmeBM8Zjwbbu5dioncd8c7npfRjBvATaEL74pa1u9gH3jnUTxh6L4WQ
/FTNYryZVbprXJsdFuDZvCsO/CChqfZL8PWz+NFgIpICOyyXdorQELMhCaeOhnfU
/goq6SvKmPlmXdb4eM2fXRD7udt1qlp+Oq2EZUdT3Xb4CBFsWUYbOMde22VY390Z
2E9mEztOaKjNgAM/TfCoXo7iRUSwxcpO5aSliDhJJ/7uWaxyWTzFlaoIlwIkkNKb
TcguNJbIZtjIXwBMv9gS6CqVEgFymmWqX5Tr23+vbb7S/235HqKtN1dPmV2h4R0H
QOpvYXfm6kc4tpH4J32NMp+IqfQmwgMbNtUsiXWk5Lxl27cb8K2Q5eqEwxRWMbG+
HObO7Kzb8oCygWwozZ+3QcWSr+9QAgzsb4Jl4jg6adjd8LDcbmKo4B9TKptGpVnL
xjDleKdb/P4Vq55q9KHFLjqFUesuQIv2mKl2s+zr2BqROxjZ562kM9QHwsoCqc4Q
tFuVed+XOoT7yhdKdtwEK7lwcQBtZgP5l/HgsoosmuJ975holsQ4pbKSf4A2Y4yo
XwHYonSwOAEbi4nPxnvKIm4aUNq+PC44TH0VJcXud3tmQ/DGipdlLW8/nyw9ecfa
qaQ=
=GT3J
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
The iommu_group_do_dma_attach() must not attach devices which have
deferred_attach set. Otherwise devices could cause IOMMU faults when
re-initialized in a kdump kernel.
Fixes: deac0b3bed ("iommu: Split off default domain allocation from group assignment")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200604091944.26402-1-joro@8bytes.org
Checking the return value of get_device_id() in a code-path which has
already done check_device() is not needed, as check_device() does the
same check and bails out if it fails.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-11-joro@8bytes.org
Do not use dev->archdata.iommu anymore and switch to using the private
per-device pointer provided by the IOMMU core code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-10-joro@8bytes.org
This is covered by IOMMU_DOMAIN_DMA from the IOMMU core code already,
so remove it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-8-joro@8bytes.org
Align release of the page-table with the place where it is allocated.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-6-joro@8bytes.org
Use 'struct domain_pgtable' instead to free_pagetable(). This solves
the problem that amd_iommu_domain_direct_map() needs to restore
domain->pt_root after the device table has been updated just to make
free_pagetable release the domain page-table.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-4-joro@8bytes.org
This function is internal to the AMD IOMMU driver and only exported
because the amd_iommu_v2 modules calls it. But the reason it is called
from there could better be handled by amd_iommu_is_attach_deferred().
So unexport get_dev_data() and use amd_iommu_is_attach_deferred()
instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200527115313.7426-3-joro@8bytes.org
kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.
Fixes: d72e31c937 ("iommu: IOMMU Groups")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make intel_svm_unbind_mm() a static function.
Fixes: 064a57d7dd ("iommu/vt-d: Replace intel SVM APIs with generic SVA APIs")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1590689031-79318-1-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By removing the real DMA indirection in find_domain(), we can allow
sub-devices of a real DMA device to have their own valid
device_domain_info. The dmar lookup and context entry removal paths have
been fixed to account for sub-devices.
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200527165617.297470-4-jonathan.derrick@intel.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207575
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sub-devices of a real DMA device might exist on a separate segment than
the real DMA device and its IOMMU. These devices should still have a
valid device_domain_info, but the current dma alias model won't
allocate info for the subdevice.
This patch adds a segment member to struct device_domain_info and uses
the sub-device's BDF so that these sub-devices won't alias to other
devices.
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200527165617.297470-3-jonathan.derrick@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Domain context mapping can encounter issues with sub-devices of a real
DMA device. A sub-device cannot have a valid context entry due to it
potentially aliasing another device's 16-bit ID. It's expected that
sub-devices of the real DMA device uses the real DMA device's requester
when context mapping.
This is an issue when a sub-device is removed where the context entry is
cleared for all aliases. Other sub-devices are still valid, resulting in
those sub-devices being stranded without valid context entries.
The correct approach is to use the real DMA device when programming the
context entries. The insertion path is correct because device_to_iommu()
will return the bus and devfn of the real DMA device. The removal path
needs to only operate on the real DMA device, otherwise the entire
context entry would be cleared for all sub-devices of the real DMA
device.
This patch also adds a helper to determine if a struct device is a
sub-device of a real DMA device.
Fixes: 2b0140c696 ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200527165617.297470-2-jonathan.derrick@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After binding a device to an mm, device drivers currently need to
register a mm_exit handler. This function is called when the mm exits,
to gracefully stop DMA targeting the address space and flush page faults
to the IOMMU.
This is deemed too complex for the MMU release() notifier, which may be
triggered by any mmput() invocation, from about 120 callsites [1]. The
upcoming SVA module has an example of such complexity: the I/O Page
Fault handler would need to call mmput_async() instead of mmput() after
handling an IOPF, to avoid triggering the release() notifier which would
in turn drain the IOPF queue and lock up.
Another concern is the DMA stop function taking too long, up to several
minutes [2]. For some mmput() callers this may disturb other users. For
example, if the OOM killer picks the mm bound to a device as the victim
and that mm's memory is locked, if the release() takes too long, it
might choose additional innocent victims to kill.
To simplify the MMU release notifier, don't forward the notification to
device drivers. Since they don't stop DMA on mm exit anymore, the PASID
lifetime is extended:
(1) The device driver calls bind(). A PASID is allocated.
Here any DMA fault is handled by mm, and on error we don't print
anything to dmesg. Userspace can easily trigger errors by issuing DMA
on unmapped buffers.
(2) exit_mmap(), for example the process took a SIGKILL. This step
doesn't happen during normal operations. Remove the pgd from the
PASID table, since the page tables are about to be freed. Invalidate
the IOTLBs.
Here the device may still perform DMA on the address space. Incoming
transactions are aborted but faults aren't printed out. ATS
Translation Requests return Successful Translation Completions with
R=W=0. PRI Page Requests return with Invalid Request.
(3) The device driver stops DMA, possibly following release of a fd, and
calls unbind(). PASID table is cleared, IOTLB invalidated if
necessary. The page fault queues are drained, and the PASID is
freed.
If DMA for that PASID is still running here, something went seriously
wrong and errors should be reported.
For now remove iommu_sva_ops entirely. We might need to re-introduce
them at some point, for example to notify device drivers of unhandled
IOPF.
[1] https://lore.kernel.org/linux-iommu/20200306174239.GM31668@ziepe.ca/
[2] https://lore.kernel.org/linux-iommu/4d68da96-0ad5-b412-5987-2f7a6aa796c3@amd.com/
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200423125329.782066-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct sun50i_iommu_ops is not modified and can be made const to
allow the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
14358 2501 64 16923 421b drivers/iommu/sun50i-iommu.o
After:
text data bss dec hex filename
14726 2117 64 16907 420b drivers/iommu/sun50i-iommu.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200525214958.30015-3-rikard.falkeborn@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct hyperv_ir_domain_ops is not modified and can be made const to
allow the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
2916 1180 1120 5216 1460 drivers/iommu/hyperv-iommu.o
After:
text data bss dec hex filename
3044 1052 1120 5216 1460 drivers/iommu/hyperv-iommu.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200525214958.30015-2-rikard.falkeborn@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pci_ats_supported() helper checks if a device supports ATS and is
allowed to use it. By checking the ATS capability it also integrates the
pci_ats_disabled() check from pci_ats_init(). Simplify the vt-d checks.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200520152201.3309416-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The new pci_ats_supported() function checks if a device supports ATS and
is allowed to use it.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200520152201.3309416-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pci_ats_supported() function checks if a device supports ATS and is
allowed to use it. In addition to checking that the device has an ATS
capability and that the global pci=noats is not set
(pci_ats_disabled()), it also checks if a device is untrusted.
A device is untrusted if it is plugged into an external-facing port such
as Thunderbolt and could be spoofing an existing device to exploit
weaknesses in the IOMMU configuration. By calling pci_ats_supported() we
keep DTE[I]=0 for untrusted devices and abort transactions with
Pretranslated Addresses.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200520152201.3309416-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_alloc_default_domain() function takes a reference to an IOMMU
group without releasing it. This causes the group to never be released,
with undefined side effects.
The function has only one call-site, which takes a group reference on
its own, so to fix this leak, do not take another reference in
iommu_alloc_default_domain() and pass the group as a function parameter
instead.
Fixes: 6e1aa20491 ("iommu: Move default domain allocation to iommu_probe_device()")
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200525130122.380-1-joro@8bytes.org
Reference: https://lore.kernel.org/lkml/20200522130145.30067-1-saiprakash.ranjan@codeaurora.org/
Pointers should be casted to unsigned long to avoid "cast from pointer
to integer of different size" warnings.
drivers/iommu/intel-pasid.c:818:6: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iommu/intel-pasid.c:821:9: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iommu/intel-pasid.c:824:23: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iommu/intel-svm.c:343:45: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fixes: b0d1f8741b ("iommu/vt-d: Add nested translation helper function")
Fixes: 56722a4398 ("iommu/vt-d: Add bind guest PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200519013423.11971-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The .probe_finalize() call-back of some IOMMU drivers calls into
arm_iommu_attach_device(). This function will call back into the
IOMMU core code, where it tries to take group->mutex again, resulting
in a deadlock.
As there is no reason why .probe_finalize() needs to be called under
that mutex, move it after the lock has been released to fix the
deadlock.
Fixes: deac0b3bed ("iommu: Split off default domain allocation from group assignment")
Reported-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20200519132824.15163-1-joro@8bytes.org
In preparation for sharing some ASIDs with the CPU, use a global xarray to
store ASIDs and their context. ASID#0 is now reserved, and the ASID
space is global.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200519175502.2504091-9-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The IOMMU core code has support for deferring the attachment of a domain
to a device. This is needed in kdump kernels where the new domain must
not be attached to a device before the device driver takes it over.
When the AMD IOMMU driver got converted to use the dma-iommu
implementation, the deferred attaching got lost. The code in
dma-iommu.c has support for deferred attaching, but it calls into
iommu_attach_device() to actually do it. But iommu_attach_device()
will check if the device should be deferred in it code-path and do
nothing, breaking deferred attachment.
Move the is_deferred_attach() check out of the attach_device path and
into iommu_group_add_device() to make deferred attaching work from the
dma-iommu code.
Fixes: 795bbbb9b6 ("iommu/dma-iommu: Handle deferred devices")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200519130340.14564-1-joro@8bytes.org
On some SoCs like MSM8939 with A405 adreno, there is a gfx_tbu clock
needs to be on while doing TLB invalidate. Otherwise, TLBSYNC status
will not be correctly reflected, causing the system to go into a bad
state. Add it as an optional clock, so that platforms that have this
clock can pass it over DT.
While adding the third clock, let's switch to bulk clk API to simplify
the enable/disable calls. clk_bulk_get() cannot used because the
existing two clocks are required while the new one is optional.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200518141656.26284-1-shawn.guo@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In case of error, the function devm_platform_ioremap_resource() returns
ERR_PTR() not NULL. The NULL test in the return value check must be
replaced with IS_ERR().
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200519091857.134170-1-weiyongjun1@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some SMMUv3 implementation embed the Perf Monitor Group Registers (PMCG)
inside the first 64kB region of the SMMU. Since PMCG are managed by a
separate driver, this layout causes resource reservation conflicts
during boot.
To avoid this conflict, don't reserve the MMIO regions that are
implementation defined. Although devm_ioremap_resource() still works on
full pages under the hood, this way we benefit from resource conflict
checks.
Fixes: 7d839b4b9e ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200513110255.597203-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The modem remote processor has two access paths to DDR. One path is
directly connected to DDR and another path goes through an SMMU. The
SMMU path is configured to be a direct mapping because it's used by
various peripherals in the modem subsystem. Typically this direct
mapping is configured statically at EL2 by QHEE (Qualcomm's Hypervisor
Execution Environment) before the kernel is entered.
In certain firmware configuration, especially when the kernel is already
in full control of the SMMU, defer programming the modem SIDs to the
kernel. Let's add compatibles here so that we can have the kernel
program the SIDs for the modem in these cases.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200511175532.25874-1-sibis@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/iommu/arm-smmu-v3.c:2989:26:
warning: variable ‘smmu’ set but not used [-Wunused-but-set-variable]
struct arm_smmu_device *smmu;
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Link: https://lore.kernel.org/r/20200508014955.87630-1-chenzhou10@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The MediaTek V1 IOMMU is arm32 whose default domain type is
IOMMU_DOMAIN_UNMANAGED. Add this to satisfy the bus_iommu_probe to
enter "probe_finalize".
The iommu framework will create a iommu domain for each a device.
But all the devices share a iommu domain here, thus we skip all the
other domains in the "attach_device" except the domain we create
internally with arm_iommu_create_mapping.
Also a minor change: in the attach_device, "data" always is not null.
Remove "if (!data) return".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/1589530123-30240-1-git-send-email-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The fwnode pointer must be passed to the iommu core, so that the core
can map the IOMMU towards device requests properly. Without this, some
IOMMU clients like OMAP remoteproc will fail the iommu configuration
multiple times with -EPROBE_DEFER, which will eventually be ignored with
a kernel warning banner.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200424145828.3159-1-t-kristo@ti.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There's no need for the non-dma_ops path to keep track of IOVAs. The
whole point of the non-dma_ops path is that it allows the IOVAs to be
handled separately. The IOVA handling code removed in this patch is
pointless.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-19-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The info and info->pasid_support have already been checked in previous
intel_iommu_enable_pasid() call. No need to check again.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-18-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOTLB flush already included in the PASID tear down and the page request
drain process. There is no need to flush again.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-17-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a PASID is stopped or terminated, there can be pending PRQs
(requests that haven't received responses) in remapping hardware.
This adds the interface to drain page requests and call it when a
PASID is terminated.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-16-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a PASID is used for SVA by the device, it's possible that the PASID
entry is cleared before the device flushes all ongoing DMA requests. The
IOMMU should tolerate and ignore the non-recoverable faults caused by the
untranslated requests from this device.
For example, when an exception happens, the process terminates before the
device driver stops DMA and call IOMMU driver to unbind PASID. The flow
of process exist is as follows:
do_exit() {
exit_mm() {
mm_put();
exit_mmap() {
intel_invalidate_range() //mmu notifier
tlb_finish_mmu()
mmu_notifier_release(mm) {
intel_iommu_release() {
[2] intel_iommu_teardown_pasid();
intel_iommu_flush_tlbs();
}
}
unmap_vmas();
free_pgtables();
};
}
exit_files(tsk) {
close_files() {
dsa_close();
[1] dsa_stop_dma();
intel_svm_unbind_pasid();
}
}
}
Care must be taken on VT-d to avoid unrecoverable faults between the time
window of [1] and [2]. [Process exist flow was contributed by Jacob Pan.]
Intel VT-d provides such function through the FPD bit of the PASID entry.
This sets FPD bit when PASID entry is changing from present to nonpresent
in the mm notifier and will clear it when the pasid is unbound.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-15-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current qi_submit_sync() only supports single invalidation descriptor
per submission and appends wait descriptor after each submission to
poll the hardware completion. This extends the qi_submit_sync() helper
to support multiple descriptors, and add an option so that the caller
could specify the Page-request Drain (PD) bit in the wait descriptor.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-13-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch is an initial step to replace Intel SVM code with the
following IOMMU SVA ops:
intel_svm_bind_mm() => iommu_sva_bind_device()
intel_svm_unbind_mm() => iommu_sva_unbind_device()
intel_svm_is_pasid_valid() => iommu_sva_get_pasid()
The features below will continue to work but are not included in this patch
in that they are handled mostly within the IOMMU subsystem.
- IO page fault
- mmu notifier
Consolidation of the above will come after merging generic IOMMU sva
code[1]. There should not be any changes needed for SVA users such as
accelerator device drivers during this time.
[1] http://jpbrucker.net/sva/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Query Shared Virtual Address/Memory capability is a generic feature.
SVA feature check is the required first step before calling
iommu_sva_bind_device().
VT-d checks SVA feature enabling at per IOMMU level during this step,
SVA bind device will check and enable PCI ATS, PRS, and PASID capabilities
at device level.
This patch reports Intel SVM as SVA feature such that generic code
(e.g. Uacce [1]) can use it.
[1] https://lkml.org/lkml/2020/1/15/604
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When VT-d driver runs in the guest, PASID allocation must be
performed via virtual command interface. This patch registers a
custom IOASID allocator which takes precedence over the default
XArray based allocator. The resulting IOASID allocation will always
come from the host. This ensures that PASID namespace is system-
wide.
Virtual command registers are used in the guest only, to prevent
vmexit cost, we cache the capability and store it during initialization.
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Enabling IOMMU in a guest requires communication with the host
driver for certain aspects. Use of PASID ID to enable Shared Virtual
Addressing (SVA) requires managing PASID's in the host. VT-d 3.0 spec
provides a Virtual Command Register (VCMD) to facilitate this.
Writes to this register in the guest are trapped by vIOMMU which
proxies the call to the host driver.
This virtual command interface consists of a capability register,
a virtual command register, and a virtual response register. Refer
to section 10.4.42, 10.4.43, 10.4.44 for more information.
This patch adds the enlightened PASID allocation/free interfaces
via the virtual command interface.
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When Shared Virtual Address (SVA) is enabled for a guest OS via
vIOMMU, we need to provide invalidation support at IOMMU API and driver
level. This patch adds Intel VT-d specific function to implement
iommu passdown invalidate API for shared virtual address.
The use case is for supporting caching structure invalidation
of assigned SVM capable devices. Emulated IOMMU exposes queue
invalidation capability and passes down all descriptors from the guest
to the physical IOMMU.
The assumption is that guest to host device ID mapping should be
resolved prior to calling IOMMU driver. Based on the device handle,
host IOMMU driver can replace certain fields before submit to the
invalidation queue.
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When Shared Virtual Memory is exposed to a guest via vIOMMU, scalable
IOTLB invalidation may be passed down from outside IOMMU subsystems.
This patch adds invalidation functions that can be used for additional
translation cache types.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When supporting guest SVA with emulated IOMMU, the guest PASID
table is shadowed in VMM. Updates to guest vIOMMU PASID table
will result in PASID cache flush which will be passed down to
the host as bind guest PASID calls.
For the SL page tables, it will be harvested from device's
default domain (request w/o PASID), or aux domain in case of
mediated device.
.-------------. .---------------------------.
| vIOMMU | | Guest process CR3, FL only|
| | '---------------------------'
.----------------/
| PASID Entry |--- PASID cache flush -
'-------------' |
| | V
| | CR3 in GPA
'-------------'
Guest
------| Shadow |--------------------------|--------
v v v
Host
.-------------. .----------------------.
| pIOMMU | | Bind FL for GVA-GPA |
| | '----------------------'
.----------------/ |
| PASID Entry | V (Nested xlate)
'----------------\.------------------------------.
| | |SL for GPA-HPA, default domain|
| | '------------------------------'
'-------------'
Where:
- FL = First level/stage one page tables
- SL = Second level/stage two page tables
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nested translation mode is supported in VT-d 3.0 Spec.CH 3.8.
With PASID granular translation type set to 0x11b, translation
result from the first level(FL) also subject to a second level(SL)
page table translation. This mode is used for SVA virtualization,
where FL performs guest virtual to guest physical translation and
SL performs guest physical to host physical translation.
This patch adds a helper function for setting up nested translation
where second level comes from a domain and first level comes from
a guest PGD.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
An Intel iommu domain uses 5-level page table by default. If the iommu
that the domain tries to attach supports less page levels, the top level
page tables should be skipped. Add a helper to do this so that it could
be used in other places.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move domain helper to header to be used by SVA code.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most of the devices in OMAP family of SoCs are not using IOMMU. The
patch for converting the OMAP IOMMU to use generic IOMMU bus probe
functionality failed to add a check for this, so add it here.
Fixes: c822b37cac ("iommu/omap: Remove orphan_dev tracking")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200518111057.23140-1-t-kristo@ti.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After moving iommu_group setup to iommu core code [1][2] and removing
private domain support in vt-d [3], there are no users for functions such
as iommu_request_dm_for_dev(), iommu_request_dma_domain_for_dev() and
request_default_domain_for_dev(). So, remove these functions.
[1] commit dce8d6964e ("iommu/amd: Convert to probe/release_device()
call-backs")
[2] commit e5d1841f18 ("iommu/vt-d: Convert to probe/release_device()
call-backs")
[3] commit 327d5b2fee ("iommu/vt-d: Allow 32bit devices to uses DMA
domain")
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200513224721.20504-1-sai.praneeth.prakhya@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A few compile warnings show up when building this driver:
CC drivers/iommu/sun50i-iommu.o
drivers/iommu/sun50i-iommu.c: In function ‘sun50i_dte_get_page_table’:
drivers/iommu/sun50i-iommu.c:486:16: warning: unused variable ‘flags’ [-Wunused-variable]
486 | unsigned long flags;
| ^~~~~
drivers/iommu/sun50i-iommu.c: In function ‘sun50i_iommu_unmap’:
drivers/iommu/sun50i-iommu.c:559:23: warning: unused variable ‘iommu’ [-Wunused-variable]
559 | struct sun50i_iommu *iommu = sun50i_domain->iommu;
| ^~~~~
drivers/iommu/sun50i-iommu.c: In function ‘sun50i_iommu_probe_device’:
drivers/iommu/sun50i-iommu.c:749:22: warning: unused variable ‘group’ [-Wunused-variable]
749 | struct iommu_group *group;
| ^~~~~
Remove the unused variables.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200514124621.25999-1-joro@8bytes.org
The Allwinner H6 has introduced an IOMMU for a few DMA controllers, mostly
video related: the display engine, the video decoders / encoders, the
camera capture controller, etc.
The design is pretty simple compared to other IOMMUs found in SoCs: there's
a single instance, controlling all the masters, with a single address
space.
It also features a performance monitoring unit that allows to retrieve
various informations (per-master and global TLB accesses, hits and misses,
access latency, etc) that isn't supported at the moment.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/d122a8670361e36fc26b4ce2674a2223d30dc4cc.1589378833.git-series.maxime@cerno.tech
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Unify format of the printed messages, i.e. replace printk(LEVEL ... )
with pr_level(...).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200507161804.13275-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current Intel IOMMU driver sets the system level dma_ops. This causes
each dma API to go through the IOMMU driver even the devices are using
identity mapped domains. This sets per-device dma_ops only if a device
is using a DMA domain. Otherwise, use the default system level dma_ops
for direct dma.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200506015947.28662-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before commit fa954e6831 ("iommu/vt-d: Delegate the dma domain
to upper layer"), Intel IOMMU started off with all devices in the
identity domain, and took them out later if it found they couldn't
access all of memory. This required devices behind a PCI bridge to
use a DMA domain at the beginning because all PCI devices behind
the bridge use the same source-id in their transactions and the
domain couldn't be changed at run-time.
Intel IOMMU driver is now aligned with the default domain framework,
there's no need to keep this requirement anymore.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200506015947.28662-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, if a 32bit device initially uses an identity domain, Intel
IOMMU driver will convert it forcibly to a DMA one if its address
capability is not enough for the whole system memory. The motivation was
to overcome the overhead caused by possible bounced buffer.
Unfortunately, this improvement has led to many problems. For example,
some 32bit devices are required to use an identity domain, forcing them
to use DMA domain will cause the device not to work anymore. On the
other hand, the VMD sub-devices share a domain but each sub-device might
have different address capability. Forcing a VMD sub-device to use DMA
domain blindly will impact the operation of other sub-devices without
any notification. Further more, PCI aliased devices (PCI bridge and all
devices beneath it, VMD devices and various devices quirked with
pci_add_dma_alias()) must use the same domain. Forcing one device to
switch to DMA domain during runtime will cause in-fligh DMAs for other
devices to abort or target to other memory which might cause undefind
system behavior.
With the last private domain usage in iommu_need_mapping() removed, all
private domain helpers are also cleaned in this patch. Otherwise, the
compiler will complain that some functions are defined but not used.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Derrick Jonathan <jonathan.derrick@intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200506015947.28662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the following sparse warning:
drivers/iommu/msm_iommu.c:37:1: warning: symbol 'msm_iommu_lock' was not declared.
The msm_iommu_lock has only call site within msm_iommu.c
It should be static
Fixes: 0720d1f052 ("msm: Add MSM IOMMU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1589249839-105820-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
acpi_dev_hid_uid_match() expects a null pointer for UID if it doesn't
exist. The acpihid_map_entry contains a char buffer for holding the
UID. If no UID was provided in the IVRS table, this buffer will be
zeroed. If we pass in a null string, acpi_dev_hid_uid_match() will
return false because it will try and match an empty string to the ACPI
UID of the device.
Fixes: ae5e6c6439 ("iommu/amd: Switch to use acpi_dev_hid_uid_match()")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200511103229.v2.1.I6f1b6f973ee6c8af1348611370c73a0ec0ea53f1@changeid
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IVRS parsing code always tries to read 255 bytes from memory when
retrieving ACPI device path, and makes an assumption that firmware
provides a zero-terminated string. Both of those are bugs: the entry
is likely to be shorter than 255 bytes, and zero-termination is not
guaranteed.
With Acer SF314-42 firmware these issues manifest visibly in dmesg:
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2\xf0\xa5, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3>\x83e\x8d\x9a\xd1...
The first three lines show how the code over-reads adjacent table
entries into the UID, and in the last line it even reads garbage data
beyond the end of the IVRS table itself.
Since each entry has the length of the UID (uidl member of ivhd_entry
struct), use that for memcpy, and manually add a zero terminator.
Avoid zero-filling hid and uid arrays up front, and instead ensure
the uid array is always zero-terminated. No change needed for the hid
array, as it was already properly zero-terminated.
Fixes: 2a0cb4e2d4 ("iommu/amd: Add new map for storing IVHD dev entry type HID")
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20200511102352.1831-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
gcc warns because the only reference to ipmmu_find_group
is inside of an #ifdef:
drivers/iommu/ipmmu-vmsa.c:878:28: error: 'ipmmu_find_group' defined but not used [-Werror=unused-function]
Change the #ifdef to an equivalent IS_ENABLED().
Fixes: 6580c8a784 ("iommu/renesas: Convert to probe/release_device() call-backs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://lore.kernel.org/r/20200508220224.688985-1-arnd@arndb.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The host1x bus implemented on Tegra SoCs is primarily an abstraction to
create logical device from multiple platform devices. Since the devices
in such a setup are typically hierarchical, DMA setup still needs to be
done so that DMA masks can be properly inherited, but we don't actually
want to attach the host1x logical devices to any IOMMU. The platform
devices that make up the logical device are responsible for memory bus
transactions, so it is them that will need to be attached to the IOMMU.
Add a check to __iommu_probe_device() that aborts IOMMU setup early for
busses that don't have the IOMMU operations pointer set since they will
cause a crash otherwise.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200511161000.3853342-1-thierry.reding@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit dce8d6964e ("iommu/amd: Convert to probe/release_device()
call-backs") introduced an unused variable,
drivers/iommu/amd_iommu.c: In function 'amd_iommu_uninit_device':
drivers/iommu/amd_iommu.c:422:20: warning: variable 'iommu' set but not
used [-Wunused-but-set-variable]
struct amd_iommu *iommu;
^~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200509015645.3236-1-cai@lca.pw
Fixes: dce8d6964e ("iommu/amd: Convert to probe/release_device() call-backs")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Elsewhere in the file, there is a list_for_each_entry with
&vdev->resv_regions as the second argument, suggesting that
&vdev->resv_regions is the list head. So exchange the
arguments on the list_add call to put the list head in the
second argument.
Fixes: 2a5a314874 ("iommu/virtio: Add probe request")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1588704467-13431-1-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some client devices want to directly map the IOMMU themselves instead
of using the DMA domain. Allow those devices to opt in to direct
mapping by way of a list of compatible strings.
Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7cf1f64167b5545b7f42275395be1f1e2ea3a6ac.1587407458.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently the QCOM specific smmu reset implementation is very
specific to SDM845 SoC and has a wait-for-safe logic which
may not be required for other SoCs. So move the SDM845 specific
logic to its specific reset function. Also add SC7180 SMMU
compatible for calling into QCOM specific implementation.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/d24a0278021bc0b2732636c5728efe55e7318a8b.1587407458.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently on reboot/shutdown, the following messages are
displayed on the console as error messages before the
system reboots/shutdown as part of remove callback.
On SC7180:
arm-smmu 15000000.iommu: removing device with active domains!
arm-smmu 5040000.iommu: removing device with active domains!
Make this error message more informative and less scary.
Reported-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200423095531.9868-1-saiprakash.ranjan@codeaurora.org
[will: use dev_notice() as per Robin]
Signed-off-by: Will Deacon <will@kernel.org>
The flush of the Device Table Entries for the domain has already
happened in increase_address_space(), if necessary. Do no flush them
again in iommu_map_page().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-6-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Device Table needs to be updated before the new page-table root
can be published in domain->pt_root. Otherwise a concurrent call to
fetch_pte might fetch a PTE which is not reachable through the Device
Table Entry.
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-5-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The update_domain() function is expected to also inform the hardware
about domain changes. This needs a COMPLETION_WAIT command to be sent
to all IOMMUs which use the domain.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-4-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When increase_address_space() fails to allocate memory, alloc_pte()
will call it again until it succeeds. Do not loop forever while trying
to increase the address space and just return an error instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'pt_root' and 'mode' struct members of 'struct protection_domain'
need to be get/set atomically, otherwise the page-table of the domain
can get corrupted.
Merge the fields into one atomic64_t struct member which can be
get/set atomically.
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is now only used in IOMMU core code and shouldn't be used
outside of it anyway, so remove the export for it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-35-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the calls to dev_iommu_get() and try_module_get() into
__iommu_probe_device(), so that the callers don't have to do it on
their own.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-34-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All drivers are converted to use the probe/release_device()
call-backs, so the add_device/remove_device() pointers are unused and
the code using them can be removed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-33-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Exynos IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-32-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On Exynos platforms there can be more than one SYSMMU (IOMMU) for one
DMA master device. Since the IOMMU core code expects only one hardware
IOMMU, use the first SYSMMU in the list.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-31-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the OMAP IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-30-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the tracking of device which could not be probed because
their IOMMU is not probed yet. Replace it with a call to
bus_iommu_probe() when a new IOMMU is probed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-29-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Renesas IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-28-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Tegra IOMMU drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-27-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Rockchip IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-26-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the QCOM IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-25-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Mediatek-v1 IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-24-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Mediatek IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-23-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the MSM IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-22-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the VirtIO IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-21-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the S390 IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-20-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the PAMU IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-19-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code does the
group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-18-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Intel IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200429133712.31431-17-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the AMD IOMMU Driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-16-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of generic IOMMU infrastructure to gather the same information
carried in dev_data->passthrough and remove the struct member.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-15-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a check to the bus_iommu_probe() call-path to make sure it ignores
devices which have already been successfully probed. Then export the
bus_iommu_probe() function so it can be used by IOMMU drivers.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After the previous changes the iommu group may not have a default
domain when iommu_group_add_device() is called. With no default domain
iommu_group_create_direct_mappings() will do nothing and no direct
mappings will be created.
Rename iommu_group_create_direct_mappings() to
iommu_create_device_direct_mappings() to better reflect that the
function creates direct mappings only for one device and not for all
devices in the group. Then move the call to the places where a default
domain actually exists.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-13-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a bus is initialized with iommu-ops, all devices on the bus are
scanned and iommu-groups are allocated for them, and each groups will
also get a default domain allocated.
Until now this happened as soon as the group was created and the first
device added to it. When other devices with different default domain
requirements were added to the group later on, the default domain was
re-allocated, if possible.
This resulted in some back and forth and unnecessary allocations, so
change the flow to defer default domain allocation until all devices
have been added to their respective IOMMU groups.
The default domains are allocated for newly allocated groups after
each device on the bus is handled and was probed by the IOMMU driver.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-12-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This makes it easier to remove to old code-path when all drivers are
converted. As a side effect that it also fixes the error cleanup
path.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-11-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is needed to defer default_domain allocation for new IOMMU groups
until all devices have been added to the group.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-10-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Well, not really. The call to iommu_alloc_default_domain() in
iommu_group_get_for_dev() has to stay around as long as there are
IOMMU drivers using the add/remove_device() call-backs instead of
probe/release_device().
Those drivers expect that iommu_group_get_for_dev() returns the device
attached to a group and the group set up with a default domain (and
the device attached to the groups current domain).
But when all drivers are converted this compatability mess can be
removed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-9-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add call-backs to 'struct iommu_ops' as an alternative to the
add_device() and remove_device() call-backs, which will be removed when
all drivers are converted.
The new call-backs will not setup IOMMU groups and domains anymore,
so also add a probe_finalize() call-back where the IOMMU driver can do
per-device setup work which require the device to be set up with a
group and a domain.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-8-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When check_device() fails on the device, it is not handled by the
IOMMU and amd_iommu_add_device() needs to return -ENODEV.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-7-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The check was only needed for the DMA-API implementation in the AMD
IOMMU driver, which no longer exists.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-6-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel VT-d driver already has a matching function to determine the
default domain type for a device. Wire it up in intel_iommu_ops.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200429133712.31431-5-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some devices are reqired to use a specific type (identity or dma)
of default domain when they are used with a vendor iommu. When the
system level default domain type is different from it, the vendor
iommu driver has to request a new default domain with
iommu_request_dma_domain_for_dev() and iommu_request_dm_for_dev()
in the add_dev() callback. Unfortunately, these two helpers only
work when the group hasn't been assigned to any other devices,
hence, some vendor iommu driver has to use a private domain if
it fails to request a new default one.
This adds def_domain_type() callback in the iommu_ops, so that
any special requirement of default domain for a device could be
aware by the iommu generic layer.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
[ jroedel@suse.de: Added iommu_get_def_domain_type() function and use
it to allocate the default domain ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the code out of iommu_group_get_for_dev() into a separate
function.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.
Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In commit a7ba5c3d00 ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev(). That export should
also be _GPL like the others.
Fixes: a7ba5c3d00 ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The CONFIG_ prefix should be added in the code.
Fixes: 046182525d ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode")
Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.
Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.
Fixes: 3928aa3f57 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
configurations, its presence makes arch/powerpc/kvm/Makefile to select
modules which do not build in such configuration.
The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
#define _PAGE_EXEC 0x00001 /* execute permission */
In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
from arch/powerpc/include/asm/book3s/pgtable.h:8,
from arch/powerpc/include/asm/pgtable.h:18,
from include/linux/mm.h:95,
from arch/powerpc/include/asm/io.h:29,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from arch/powerpc/include/asm/hardirq.h:6,
from include/linux/hardirq.h:9,
from include/linux/kvm_host.h:7,
from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
#define _PAGE_EXEC 0x200 /* software: exec allowed */
Fixes: e93a1695d7 ("iommu: Enable compile testing for some of drivers")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200414142630.21153-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config):
drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap':
dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot'
IOMMU_DMA must not be selected, unless HAS_DMA=y.
Hence fix this by making MTK_IOMMU depend on HAS_DMA.
While at it, remove the dependency on ARM || ARM64, as that is already
implied by the dependency on ARCH_MEDIATEK.
Fixes: e93a1695d7 ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200410143047.19691-1-geert@linux-m68k.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the future the bus sysdata may not directly point to the
zpci_dev.
In preparation of upcoming patches let us abstract the
access to the zpci_dev from the device inside the pci device.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The single atomic pool is allocated from the lowest zone possible since
it is guaranteed to be applicable for any DMA allocation.
Devices may allocate through the DMA API but not have a strict reliance
on GFP_DMA memory. Since the atomic pool will be used for all
non-blockable allocations, returning all memory from ZONE_DMA may
unnecessarily deplete the zone.
Provision for multiple atomic pools that will map to the optimal gfp
mask of the device.
When allocating non-blockable memory, determine the optimal gfp mask of
the device and use the appropriate atomic pool.
The coherent DMA mask will remain the same between allocation and free
and, thus, memory will be freed to the same atomic pool it was allocated
from.
__dma_atomic_pool_init() will be changed to return struct gen_pool *
later once dynamic expansion is added.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Make use of dev_iommu_priv_set/get() functions and simplify the code
where possible with this change.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Link: https://lore.kernel.org/r/20200326150841.10083-12-joro@8bytes.org
In preparation for restructuring iommu_fwspec, refactor the way we
access the arm_smmu_master_cfg private data to be less dependent on
the current layout.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200326150841.10083-11-joro@8bytes.org
Make use of dev_iommu_priv_set/get() functions in the code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-10-joro@8bytes.org
Some unrelated changes in the iommu code caused a new warning to
appear in the arm-smmu driver:
CC drivers/iommu/arm-smmu.o
drivers/iommu/arm-smmu.c: In function 'arm_smmu_add_device':
drivers/iommu/arm-smmu.c:1441:2: warning: 'smmu' may be used uninitialized in this function [-Wmaybe-uninitialized]
arm_smmu_rpm_put(smmu);
^~~~~~~~~~~~~~~~~~~~~~
The warning is a false positive, but initialize the variable to NULL
to get rid of it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-8-joro@8bytes.org
Move the iommu_fwspec pointer in struct device into struct dev_iommu.
This is a step in the effort to reduce the iommu related pointers in
struct device to one.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200326150841.10083-7-joro@8bytes.org
We don't currently support IOMMUs with a page granule larger than the
system page size. The IOVA allocator has a BUG_ON() in this case, and
VFIO has a WARN_ON().
Removing these obstacles ranges doesn't seem possible without major
changes to the DMA API and VFIO. Some callers of iommu_map(), for
example, want to map multiple page-aligned regions adjacent to each
others for scatter-gather purposes. Even in simple DMA API uses, a call
to dma_map_page() would let the endpoint access neighbouring memory. And
VFIO users cannot ensure that their virtual address buffer is physically
contiguous at the IOMMU granule.
Rather than triggering the IOVA BUG_ON() on mismatched page sizes, abort
the vdomain finalise() with an error message. We could simply abort the
viommu probe(), but an upcoming extension to virtio-iommu will allow
setting different page masks for each endpoint.
Reported-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Calling viommu_domain_free() on a domain that hasn't been finalised (not
attached to any device, for example) can currently cause an Oops,
because we attempt to call ida_free() on ID 0, which may either be
unallocated or used by another domain.
Only initialise the vdomain->viommu pointer, which denotes a finalised
domain, at the end of a successful viommu_domain_finalise().
Fixes: edcd69ab9a ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOASID code is needed by VT-d scalable mode for PASID allocation.
Add explicit dependency such that IOASID is built-in whenever Intel
IOMMU is enabled.
Otherwise, aux domain code will fail when IOMMU is built-in and IOASID
is compiled as a module.
Fixes: 59a623374d ("iommu/vt-d: Replace Intel specific PASID allocator with IOASID")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Linus Torvalds
Peter Xu
Mike Rapoport
Ingo Molnar
Bjorn Helgaas
Michael S. Tsirkin
Joerg Roedel
Jerry Snitselaar
Lorenzo Pieralisi
Will Deacon
Ashok Raj
Lu Baolu
Baolin Wang
Jacob Pan
Liu Yi L
Jon Derrick
Rob Clark
Wei Yongjun
Libing Zhou
Colin Ian King
Robin Murphy
Lad Prabhakar
Marian-Cristian Rotariu
Krishna Reddy
Christoph Hellwig
Kees Cook
John Garry
Hanna Hawa
Tomasz Nowicki
Thomas Gleixner
Rajat Jain
Alexander A. Klimov
Chao Hao
Jordan Crouse
Qian Cai
Jonathan Marek
Geert Uytterhoeven
Maxime Ripard
Paul Menzel
Jean-Philippe Brucker
Yoshihiro Shimoda
Joe Perches
Denis Efremov
Masahiro Yamada
Michel Lespinasse
Qiushi Wu
Rikard Falkeborn
Shawn Guo
Yong Wu
Sibi Sankar
Chen Zhou
Tero Kristo via iommu
Tom Murphy
Sai Praneeth Prakhya
Andy Shevchenko
Samuel Zou
Raul E Rangel
Alexander Monakov
Arnd Bergmann
Thierry Reding
Julia Lawall
Sai Prakash Ranjan
Tang Bin
Greg Kroah-Hartman
Suravee Suthikulpanit
Krzysztof Kozlowski
Kevin Hao
Pierre Morel
David Rientjes