Now that the pipeline is stored into pads instead of entities, we can
change the relevant functions to take pads instead of entities.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new media entity operation, has_pad_interdep. The optional op is
used to discover the pad interdependencies inside an entity during the
pipeline construction.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
[Note: the code is mostly from Laurent but the patch description is from Tomi]
The media_pipeline_start() and media_pipeline_stop() functions use the
media graph walk API to traverse the graph and validate the pipeline.
The graph walk traverses the media graph following links between the
entities.
Also, while the pipeline can't change between the start and stop calls,
the graph is walked again from scratch at stop time, or any time a
driver needs to inspect the pipeline.
With the upcoming multiplexed streams support we will need a bit more
intelligent pipeline construction, as e.g. two independent streams may
be passing through a single entity via separate pads in which case
those pads should not be part of the same pipeline.
This patch essentially rewrites the media_pipeline_start/stop so that
a pipeline is defined as a set of pads instead of entities and the media
graph traversal considers the pad interdependencies when choosing which
links to follow.
Currently all the entity's pads are considered as interdependent. This
means that the behavior with all the current drivers stays the same, but
in the future we can define a more fine-grained pipeline construction.
Additionally the media pipeline's pads are cached at
media_pipeline_start() time, and re-used at media_pipeline_stop() which
avoid the need to re-walk the whole graph as the previous implementation
did.
Also, caching pads in the pipeline can serve in the future as the
foundation to provide a better API than the media graph walk to drivers
to iterate over pads and entities in the pipeline.
Note that the old media_pipeline_start/stop used the media graph walk
API. The new version does not use the media graph walk API, but instead
a new implementation.
There are two reasons for not changing the graph walk: it proved to be
rather difficult to change the graph walk to have the features
implemented in this patch, and second, this keeps the backward
compatibility of the graph walk as there are users of the graph walk API
The long term plan is that all the existing code would be converted to
use the new cached pipeline, thus allowing us to remove the graph walk.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add new variant of media_pipeline_start(), media_pipeline_alloc_start().
media_pipeline_alloc_start() can be used by drivers that do not need to
extend the media_pipeline. The function will either use the pipeline
already associated with the entity, if such exists, or allocate a new
pipeline.
When media_pipeline_stop() is called and the pipeline's use count drops
to zero, the pipeline is automatically freed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace direct access to the pipe field in drivers with a new helper
function. This will allow easier refactoring of media pipeline handling
in the MC core behind the scenes without affecting drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_get_fwnode_pad() function is unrelated to the graph
traversal code that it is currently bundled with. Move it with the
media_entity_remote_pad() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_enum_init() function is a wrapper around
__media_entity_enum_init() that turns a media_device pointer argument
into the maximum entity ID in the corresponding media graph.
__media_entity_enum_init() is never used outside of
media_entity_enum_init(), so the two functions can be merged together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add an iterator helper to easily cycle through all pads in an entity and
use it in media-entity and media-device code where appropriate.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
'streaming_count' is a bit misleading name, as the count is increased
with media_pipeline_start(). Let's rename it to 'start_count' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The newly added media_entity_remote_source_pad_unique() helper function
handles use cases where the entity has a link enabled uniqueness
constraint covering all pads. There are use cases where the constraint
covers a specific pad only. Add a new media_pad_remote_pad_unique()
function to handle this. It operates as
media_entity_remote_source_pad_unique(), but on a given pad instead of
on the entity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_remote_pad_first() helper function returns the first
remote pad it finds connected to a given pad. Beside being possibly
non-deterministic (as it stops at the first enabled link), the fact that
it returns the first match makes it unsuitable for drivers that need to
guarantee that a single link is enabled, for instance when an entity can
process data from one of multiple sources at a time.
For those use cases, add a new helper function,
media_entity_remote_pad_unique(), that operates on an entity and returns
a remote pad, with a guarantee that only one link is enabled. To ease
its use in drivers, also add an inline wrapper that locates source pads
specifically. A wrapper that locates sink pads can easily be added when
needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote_pad_first() to clarify its
behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Where iteration over links for an entity is clearly assuming that
all of those links are data links, use the new iterator to guarantee
that assumption is met.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Iterating over the links for an entity is a somewhat common need
through the media subsystem, but generally the assumption is that
they will all be data links. To meet that assumption add a new macro
that iterates through an entity's links and skips non-data links.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media_gobj_destroy has already set graph_obj.mdev to NULL. There is no
need to set it again.
[Sakari Ailus: Remove extra newline, rewrap commit msg]
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.
Also update media_device_init() documentation: the dev field must be now
initialised before calling it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove redundant kerneldoc documentation in mc-device.c. The functions are
already documented in media-device.h, where non-redundant documentation is
also moved.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add functions to create ancillary links, so that they don't need to
be manually created by users.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now we have three types of media link, printing the right name during
debug output is slightly more complicated. Add a helper function to
make it easier.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When iterating over the media graph, don't follow links that are not
data links.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The original implementation removes reverse links for any input link and
assumes the presense of sink/source.
It fails when the link is a not a data link.
media_entity_remove_links when there's an ancillary link can also fail.
We only need to remove reverse links for a data link.
Signed-off-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media_pipeline_start() function has two purposes: it constructs a
pipeline by recording the entities that are part of it, gathered from a
graph walk, and validate the media links. The pipeline pointer is stored
in the media_entity structure as part of this process, and the entity's
stream count is increased, to record that the entity is streaming.
When multiple video nodes are present in a pipeline,
media_pipeline_start() is typically called on all of them, with the same
pipeline pointer. This is taken into account in media_pipeline_start()
by skipping validation for entities that are already part of the
pipeline, while returning an error if an entity is part of a different
pipeline.
It turns out that this process is overly complicated. When
media_pipeline_start() is called for the first time, it constructs the
full pipeline, adding all entities and validating all the links.
Subsequent calls to media_pipeline_start() are then nearly no-ops, they
only increase the stream count on the pipeline and on all entities.
The media_entity stream_count field is used for two purposes: checking
if the entity is streaming, and detecting when a call to
media_pipeline_stop() balances needs to reset the entity pipe pointer to
NULL. The former can easily be replaced by a check of the pipe pointer.
Simplify media_pipeline_start() by avoiding the pipeline walk on all
calls but the first one, and drop the media_entity stream_count field.
media_pipeline_stop() is updated accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Drop redundant '!= NULL' as discussed]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a function to test if a pad is part of a pipeline currently
streaming, and use it through drivers to replace direct access to the
stream_count field. This will help reworking pipeline start/stop without
disturbing drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
'ent_enum->bmap' is a bitmap. So use 'bitmap_zalloc()' to simplify
code, improve the semantic and avoid some open-coded arithmetic in
allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
While at it, remove a useless 'bitmap_zero()'.
Link: https://lore.kernel.org/linux-media/b11f646dda189f490c06bf671f64a2cc0af4d45c.1638397089.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The gobj_type() function translates the media object type into
a name, being useful for debugging purposes. It is currently
not used. So, drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Request API is currently used and specified as part of the
Memory-to-memory Stateless Video Decoder Interface [1].
This can now be considered as non-experimental and stable, given
the decoder API has been used by products since a couple years,
supported by several drivers and userspace frameworks,
[1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the name of the read function of the sysfs attribute is normalized,
there is a natural association.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Smatch static checker warns that "mdev" can be null:
sound/usb/media.c:287 snd_media_device_create()
warn: 'mdev' can also be NULL
If CONFIG_MEDIA_CONTROLLER is disabled, this file should not be included
in the build.
The below conditions in the sound/usb/Makefile are in place to ensure that
media.c isn't included in the build.
sound/usb/Makefile:
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o
select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER &&
(MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)
The following config check in include/media/media-dev-allocator.h is
in place to enable the API only when CONFIG_MEDIA_CONTROLLER and
CONFIG_USB are enabled.
#if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)
This check doesn't work as intended when CONFIG_USB=m. When CONFIG_USB=m,
CONFIG_USB_MODULE is defined and CONFIG_USB is not. The above config check
doesn't catch that CONFIG_USB is defined as a module and disables the API.
This results in sound/usb enabling Media Controller specific ALSA driver
code, while Media disables the Media Controller API.
Fix the problem requires two changes:
1. Change the check to use IS_ENABLED to detect when CONFIG_USB is enabled
as a module or static. Since CONFIG_MEDIA_CONTROLLER is a bool, leave
the check unchanged to be consistent with drivers/media/Makefile.
2. Change the drivers/media/mc/Makefile to include mc-dev-allocator.o
in mc-objs when CONFIG_USB is enabled.
Link: https://lore.kernel.org/alsa-devel/YLeAvT+R22FQ%2FEyw@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a request was queued without a control handler object, and
a control handler object is then created and bound to the request
when copying controls on request completion, then a WARN_ON in
mc-request.c is triggered since at that time the request is in
state QUEUED, and not UPDATING.
But this is too strict, and in this case it must also allow
binding objects when in state QUEUED.
This patch was unfortunately lost when the "always copy the controls
on completion" patch was posted, it should have been part of that
commit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: c3bf5129f3 ("media: v4l2-ctrls: always copy the controls on completion")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
s/entity in the other end/entity at the other end/
[hverkuil: also remove the spurious space after 'link']
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It was always assumed that walking the media graph would require holding
the media_device graph_mutex but this was not documented nor checked for.
Add a lockdep check to graph walk init and iter, and document the need for
acquiring the graph_mutex.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We modified the type of media_device_request_alloc()'s second
parameter from int* to void* so that it can match the interface
defined in struct media_ioctl_info.
[hverkuil: move #ifdef before variable to avoid compile warning]
Signed-off-by: Frederic Chen <frederic.chen@mediatek.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Syzbot reports a NULL-ptr deref in the kref_put() call:
BUG: KASAN: null-ptr-deref in media_request_put drivers/media/mc/mc-request.c:81 [inline]
kref_put include/linux/kref.h:64 [inline]
media_request_put drivers/media/mc/mc-request.c:81 [inline]
media_request_close+0x4d/0x170 drivers/media/mc/mc-request.c:89
__fput+0x2ed/0x750 fs/file_table.c:281
task_work_run+0x147/0x1d0 kernel/task_work.c:123
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:165 [inline]
prepare_exit_to_usermode+0x48e/0x600 arch/x86/entry/common.c:196
What led to this crash was an injected memory allocation failure in
media_request_alloc():
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
should_failslab+0x5/0x20
kmem_cache_alloc_trace+0x57/0x300
? anon_inode_getfile+0xe5/0x170
media_request_alloc+0x339/0x440
media_device_request_alloc+0x94/0xc0
media_device_ioctl+0x1fb/0x330
? do_vfs_ioctl+0x6ea/0x1a00
? media_ioctl+0x101/0x120
? __media_device_usb_init+0x430/0x430
? media_poll+0x110/0x110
__se_sys_ioctl+0xf9/0x160
do_syscall_64+0xf3/0x1b0
When that allocation fails, filp->private_data is left uninitialized
which media_request_close() does not expect and crashes.
To avoid this, reorder media_request_alloc() such that
allocating the struct file happens as the last step thus
media_request_close() will no longer get called for a partially created
media request.
Reported-by: syzbot+6bed2d543cf7e48b822b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Fixes: 10905d70d7 ("media: media-request: implement media requests")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a missing pointer to the entity in the media_entity operation
get_fwnode_pad. There are no implementers of this op yet, but a future
entity that does so will almost certainly need a reference to itself
to carry out the work.
operation")
Fixes: ae45cd5efc ("[media] media: entity: Add get_fwnode_pad entity
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the request API got merged, only drivers at staging were
using it. As we wanted to be able to do future changes on it,
we added an artificial depends on STAGING_MEDIA.
Yet, request API is there for quite some time now, and
didn't suffer any API breakages during this time. So, drop
this.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Request API isn't meant to be chosen by users,
but instead should be selected by drivers that want
to support it.
Hantro and Cedrus are already selecting the right options,
so only the test drivers need to be fixed.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Let's place the main API selections at the media/Kconfig file,
as this way we can better organize things.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are lots of drivers that only work when the media controller
and/or the V4L2 subdev APIs are present.
Right now, someone need to first enable those APIs before
using those drivers.
Well, ideally, drivers, should, instead *optionally*
depend on it, in order for PC camera drivers to be able to use
them, but nowadays most drivers are UVC cameras, with don't
require a sensor driver.
So, be it.
Let's instead make them select the MEDIA_CONTROLLER and the
SUBDEV API, in order to make easier for people to be able
of enabling them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of media Kconfig/Makefile files already has SPDX,
but there are a few ones still missing. Add it to them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use WARN_ON instead of BUG_ON.
Add two new WARN_ONs to verify that the source pad is really a source
and that the sink pad is really a sink.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use ! instead of == NULL for source and sink]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
These are bits so to test if a pad is a sink you use & but not ==.
It looks like the only reason this hasn't caused problems before is that
media_get_pad_index() is currently only used with pads that do not set the
MEDIA_PAD_FL_MUST_CONNECT flag. So a pad really had only the SINK or SOURCE
flag set and nothing else.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.3 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In media_device_register_entity, if media_graph_walk_init fails,
need to free the previously memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
XCMhQ9s=
=cb80
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc4' into media/master
There are some conflicts due to SPDX changes. We also have more
patches being merged via media tree touching them.
So, let's merge back from upstream and address those.
Linux 5.2-rc4
* tag 'v5.2-rc4': (767 commits)
Linux 5.2-rc4
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
lockref: Limit number of cmpxchg loop retries
uaccess: add noop untagged_addr definition
x86/insn-eval: Fix use-after-free access to LDT entry
kbuild: use more portable 'command -v' for cc-cross-prefix
s390/unwind: correct stack switching during unwind
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
block: free sched's request pool in blk_cleanup_queue
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
...
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
You can't memset the contents of a __user pointer. Instead, call copy_to_user to
copy links.reserved (which is zeroed) to the user memory.
This fixes this sparse warning:
SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16: warning: incorrect type in argument 1 (different address spaces)
Fixes: f49308878d ("media: media_device_enum_links32: clean a reserved field")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It is really weird that the media controller sources are all top-level
in drivers/media. It is a bit of a left-over from long ago when most
media sources were all at the top-level. At some point we reorganized
the directory structure, but the media-*.c sources where never moved
to their own directory.
So create a new mc directory and move all sources there. Also rename
the prefix from media- to mc-.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Tomi Valkeinen
Laurent Pinchart
Jacopo Mondi
Daniel Scally
Hangyu Hua
Sakari Ailus
Yunke Cao
Linus Torvalds
Yury Norov
Christophe JAILLET
Mauro Carvalho Chehab
Ezequiel Garcia
Zhen Lei
Shuah Khan
Hans Verkuil
Sebastian Fricke
Frederic Chen
Tuomas Tynkkynen
Steve Longerbeam
Ezequiel Garcia
zhengbin
Mauro Carvalho Chehab
Hans Verkuil