In certain cases, the 802.11 mesh pathtable code wants to
iterate over all of the entries in the forwarding table from
the receive path, which is inside an RCU read-side critical
section. Enable walks inside atomic sections by allowing
GFP_ATOMIC allocations for the walker state.
Change all existing callsites to pass in GFP_KERNEL.
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
[also adjust gfs2/glock.c and rhashtable tests]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull quota fixes from Jan Kara:
"Fixes for oopses when the new quotactl gets used with quotas disabled"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotas
quota: Handle Q_GETNEXTQUOTA when quota is disabled
Pull f2fs fixes from Jaegeuk Kim.
* tag 'f2fs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: retrieve IO write stat from the right place
f2fs crypto: fix corrupted symlink in encrypted case
f2fs: cover large section in sanity check of super
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
"PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
Let's stop pretending that pages in page cache are special. They are
not.
The first patch with most changes has been done with coccinelle. The
second is manual fixups on top.
The third patch removes macros definition"
[ I was planning to apply this just before rc2, but then I spaced out,
so here it is right _after_ rc2 instead.
As Kirill suggested as a possibility, I could have decided to only
merge the first two patches, and leave the old interfaces for
compatibility, but I'd rather get it all done and any out-of-tree
modules and patches can trivially do the converstion while still also
working with older kernels, so there is little reason to try to
maintain the redundant legacy model. - Linus ]
* PAGE_CACHE_SIZE-removal:
mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If device replace entry was found on disk at mounting and its num_write_errors
stats counter has non-NULL value, then replace operation will never be
finished and -EIO error will be reported by btrfs_scrub_dev() because
this counter is never reset.
# mount -o degraded /media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/
# btrfs replace status /media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/
Started on 25.Mar 07:28:00, canceled on 25.Mar 07:28:01 at 0.0%, 40 write errs, 0 uncorr. read errs
# btrfs replace start -B 4 /dev/sdg /media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/
ERROR: ioctl(DEV_REPLACE_START) failed on "/media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/": Input/output error, no error
Reset num_write_errors and num_uncorrectable_read_errors counters in the
dev_replace structure before start of replacing.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds tracepoints to the qgroup code on both the reporting side
(insert_dirty_extents) and the accounting side. Taken together it allows us
to see what qgroup operations have happened, and what their result was.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fd we pass in may not be on a btrfs file system, so don't try to do
BTRFS_I() on it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The allocation of node could fail if the memory is too fragmented for a
given node size, practically observed with 64k.
http://article.gmane.org/gmane.comp.file-systems.btrfs/54689
Reported-and-tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
Signed-off-by: David Sterba <dsterba@suse.com>
create_pending_snapshot() will go readonly on _any_ error return from
btrfs_qgroup_inherit(). If qgroups are enabled, a user can crash their fs by
just making a snapshot and asking it to inherit from an invalid qgroup. For
example:
$ btrfs sub snap -i 1/10 /btrfs/ /btrfs/foo
Will cause a transaction abort.
Fix this by only throwing errors in btrfs_qgroup_inherit() when we know
going readonly is acceptable.
The following xfstests test case reproduces this bug:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# remove previous $seqres.full before test
rm -f $seqres.full
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
rm -f $seqres.full
_scratch_mkfs
_scratch_mount
_run_btrfs_util_prog quota enable $SCRATCH_MNT
# The qgroup '1/10' does not exist and should be silently ignored
_run_btrfs_util_prog subvolume snapshot -i 1/10 $SCRATCH_MNT $SCRATCH_MNT/snap1
_scratch_unmount
echo "Silence is golden"
status=0
exit
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As one user in mail list report reproducible balance ENOSPC error, it's
better to add more debug info for enospc_debug mount option.
Reported-by: Marc Haber <mh+linux-btrfs@zugschlus.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dan Carpenter's static checker has found this error, it's introduced by
commit 64c043de46
("Btrfs: fix up read_tree_block to return proper error")
It's really supposed to 'break' the loop on error like others.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- We call inode_size_ok() only if FL_KEEP_SIZE isn't specified.
- As an optimisation we can skip the call if (off + len)
isn't greater than the current size of the file. This operation
is called under the lock so the less work we do, the better.
- If we call inode_size_ok() pass to it the correct value rather
than a more conservative estimation.
Signed-off-by: Davide Italiano <dccitaliano@gmail.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lift length capping into the few callers that care about it. Most of
them treat all non-negatives as "success" and ignore the capped value,
and with good reasons.
Make rw_verify_area() return 0 on success.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Previously, ext4 would fail the mount if the file system had the quota
feature enabled and quota mount options (used for the older quota
setups) were present. This broke xfstests, since xfs silently ignores
the usrquote and grpquota mount options if they are specified. This
commit changes things so that we are consistent with xfs; having the
mount options specified is harmless, so no sense break users by
forbidding them.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should be testing for -ENOMEM but the minus sign is missing.
Fixes: c9af28fdd4 ('ext4 crypto: don't let data integrity writebacks fail with ENOMEM')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull btrfs fixes from Chris Mason:
"This has a few fixes Dave Sterba had queued up. These are all pretty
small, but since they were tested I decided against waiting for more"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: transaction_kthread() is not freezable
btrfs: cleaner_kthread() doesn't need explicit freeze
btrfs: do not write corrupted metadata blocks to disk
btrfs: csum_tree_block: return proper errno value
One is a reference counting bug and the other is a typo in client
minimum version.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MLba
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/martinbrandenburg/linux
Pull OrangeFS fixes from Martin Brandenburg:
"Two bugfixes for OrangeFS.
One is a reference counting bug and the other is a typo in client
minimum version"
* tag 'for-linus' of git://github.com/martinbrandenburg/linux:
orangefs: minimum userspace version is 2.9.3
orangefs: don't put readdir slot twice
This should be fixed in the quota layer so we can test with the quota
mutex held, but for now, we need this to avoid tests from crashing the
kernel aborting the regression test suite.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently if block allocation for DIO or DAX write fails due to ENOSPC,
we just returned it to userspace. However these ENOSPC errors can be
transient because the transaction freeing blocks has not yet committed.
This demonstrates as failures of generic/102 test when the filesystem is
mounted with 'dax' mount option.
Fix the problem by properly retrying the allocation in case of ENOSPC
error in get blocks functions used for direct IO.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
With the internal Quota feature, mke2fs creates empty quota inodes and
quota usage tracking is enabled as soon as the file system is mounted.
Since quotacheck is no longer preallocating all of the blocks in the
quota inode that are likely needed to be written to, we are now seeing
a lockdep false positive caused by needing to allocate a quota block
from inside ext4_map_blocks(), while holding i_data_sem for a data
inode. This results in this complaint:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ei->i_data_sem);
lock(&s->s_dquot.dqio_mutex);
lock(&ei->i_data_sem);
lock(&s->s_dquot.dqio_mutex);
Google-Bug-Id: 27907753
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
This was quite an oversight. After a readdir, the module could not be
unloaded, the number of slots is wrong, and memory near the slot bitmap
is possibly corrupt. Oops.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Pull vfs fix from Al Viro.
Automount handling was broken by commit e3c1392808 ("namei: massage
lookup_slow() to be usable by lookup_one_len_unlocked()") moving the
test for negative dentry too early.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the braino in "namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()"
acl_by_type(inode, type) returns a pointer to either inode->i_acl or
inode->i_default_acl depending on type. This is useful in
fs/posix_acl.c, but should never have been visible outside that file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When get_acl() is called for an inode whose ACL is not cached yet, the
get_acl inode operation is called to fetch the ACL from the filesystem.
The inode operation is responsible for updating the cached acl with
set_cached_acl(). This is done without locking at the VFS level, so
another task can call set_cached_acl() or forget_cached_acl() before the
get_acl inode operation gets to calling set_cached_acl(), and then
get_acl's call to set_cached_acl() results in caching an outdate ACL.
Prevent this from happening by setting the cached ACL pointer to a
task-specific sentinel value before calling the get_acl inode operation.
Move the responsibility for updating the cached ACL from the get_acl
inode operations to get_acl(). There, only set the cached ACL if the
sentinel value hasn't changed.
The sentinel values are chosen to have odd values. Likewise, the value
of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have
an even value (ACLs are aligned in memory). This allows to distinguish
uncached ACLs values from ACL objects.
In addition, switch from guarding inode->i_acl and inode->i_default_acl
upates by the inode->i_lock spinlock to using xchg() and cmpxchg().
Filesystems that do not want ACLs returned from their get_acl inode
operations to be cached must call forget_cached_acl() to prevent the VFS
from doing so.
(Patch written by Al Viro and Andreas Gruenbacher.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ecryptfs_lookup_interpose should use d_splice_alias(), not d_add()
(and return struct dentry * rather than int). Get rid of
redundant dir_inode argument, while we are touching it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We should try to trigger automount *before* bailing out on negative dentry.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Reported-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations. Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().
Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the lower or upper directory of an overlayfs mount belong to a btrfs
file system and we fsync the file through the overlayfs' merged directory
we ended up accessing an inode that didn't belong to btrfs as if it were
a btrfs inode at btrfs_sync_file() resulting in a crash like the following:
[ 7782.588845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000544
[ 7782.590624] IP: [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs]
[ 7782.591931] PGD 4d954067 PUD 1e878067 PMD 0
[ 7782.592016] Oops: 0002 [#6] PREEMPT SMP DEBUG_PAGEALLOC
[ 7782.592016] Modules linked in: btrfs overlay ppdev crc32c_generic evdev xor raid6_pq psmouse pcspkr sg serio_raw acpi_cpufreq parport_pc parport tpm_tis i2c_piix4 tpm i2c_core processor button loop autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[ 7782.592016] CPU: 10 PID: 16437 Comm: xfs_io Tainted: G D 4.5.0-rc6-btrfs-next-26+ #1
[ 7782.592016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 7782.592016] task: ffff88001b8d40c0 ti: ffff880137488000 task.ti: ffff880137488000
[ 7782.592016] RIP: 0010:[<ffffffffa030b7ab>] [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs]
[ 7782.592016] RSP: 0018:ffff88013748be40 EFLAGS: 00010286
[ 7782.592016] RAX: 0000000080000000 RBX: ffff880133b30c88 RCX: 0000000000000001
[ 7782.592016] RDX: 0000000000000001 RSI: ffffffff8148fec0 RDI: 00000000ffffffff
[ 7782.592016] RBP: ffff88013748bec0 R08: 0000000000000001 R09: 0000000000000000
[ 7782.624248] R10: ffff88013748be40 R11: 0000000000000246 R12: 0000000000000000
[ 7782.624248] R13: 0000000000000000 R14: 00000000009305a0 R15: ffff880015e3be40
[ 7782.624248] FS: 00007fa83b9cb700(0000) GS:ffff88023ed40000(0000) knlGS:0000000000000000
[ 7782.624248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7782.624248] CR2: 0000000000000544 CR3: 00000001fa652000 CR4: 00000000000006e0
[ 7782.624248] Stack:
[ 7782.624248] ffffffff8108b5cc ffff88013748bec0 0000000000000246 ffff8800b005ded0
[ 7782.624248] ffff880133b30d60 8000000000000000 7fffffffffffffff 0000000000000246
[ 7782.624248] 0000000000000246 ffffffff81074f9b ffffffff8104357c ffff880015e3be40
[ 7782.624248] Call Trace:
[ 7782.624248] [<ffffffff8108b5cc>] ? arch_local_irq_save+0x9/0xc
[ 7782.624248] [<ffffffff81074f9b>] ? ___might_sleep+0xce/0x217
[ 7782.624248] [<ffffffff8104357c>] ? __do_page_fault+0x3c0/0x43a
[ 7782.624248] [<ffffffff811a2351>] vfs_fsync_range+0x8c/0x9e
[ 7782.624248] [<ffffffff811a237f>] vfs_fsync+0x1c/0x1e
[ 7782.624248] [<ffffffff811a24d6>] do_fsync+0x31/0x4a
[ 7782.624248] [<ffffffff811a2700>] SyS_fsync+0x10/0x14
[ 7782.624248] [<ffffffff81493617>] entry_SYSCALL_64_fastpath+0x12/0x6b
[ 7782.624248] Code: 85 c0 0f 85 e2 02 00 00 48 8b 45 b0 31 f6 4c 29 e8 48 ff c0 48 89 45 a8 48 8d 83 d8 00 00 00 48 89 c7 48 89 45 a0 e8 fc 43 18 e1 <f0> 41 ff 84 24 44 05 00 00 48 8b 83 58 ff ff ff 48 c1 e8 07 83
[ 7782.624248] RIP [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs]
[ 7782.624248] RSP <ffff88013748be40>
[ 7782.624248] CR2: 0000000000000544
[ 7782.661994] ---[ end trace 721e14960eb939bc ]---
This started happening since commit 4bacc9c923 (overlayfs: Make f_path
always point to the overlay and f_inode to the underlay) and even though
after this change we could still access the btrfs inode through
struct file->f_mapping->host or struct file->f_inode, we would end up
resulting in more similar issues later on at check_parent_dirs_for_sync()
because the dentry we got (from struct file->f_path.dentry) was from
overlayfs and not from btrfs, that is, we had no way of getting the dentry
that belonged to btrfs (we always got the dentry that belonged to
overlayfs).
The new patch from Miklos Szeredi, titled "vfs: add file_dentry()" and
recently submitted to linux-fsdevel, adds a file_dentry() API that allows
us to get the btrfs dentry from the input file and therefore being able
to fsync when the upper and lower directories belong to btrfs filesystems.
This issue has been reported several times by users in the mailing list
and bugzilla. A test case for xfstests is being submitted as well.
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101951
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109791
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cc: stable@vger.kernel.org
In the following patch,
f2fs: split journal cache from curseg cache
journal cache is split from curseg cache. So IO write statistics should be
retrived from journal cache but not curseg->sum_blk. Otherwise, it will
get 0, and the stat is lost.
Signed-off-by: Shuoran Liu <liushuoran@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the encrypted symlink case, we should check its corrupted symname after
decrypting it.
Otherwise, we can report -ENOENT incorrectly, if encrypted symname starts with
'\0'.
Cc: stable 4.5+ <stable@vger.kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Formats are better kept as a single line for easier grep.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
These jfs_<level> uses need neither a line continuation to assemble
the format strings nor newline terminations in the formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
These macros add the newline so these cause extra blank lines
in logging output.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
When Q_GETNEXTQUOTA was called for filesystem with quotas disabled
ocfs2_get_next_id() oopses. Fix the problem by checking early whether
the filesystem has quotas enabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 1ae1602de0 "configfs: switch ->default groups to a linked list"
left the NULL gps pointer behind after removing the kcalloc() call which
made it non-NULL. It also left the !gps check in place so make_cluster()
now fails with ENOMEM. Remove the remaining uses of the gps variable to
fix that.
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently we oopsed when Q_GETNEXTQUOTA got called when quota was
disabled. Properly check whether quota is enabled for the filesystem
before calling into quota format handler.
Reported-by: Ted Tso <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
The get_acl inode operation is called only when no ACL is cached. It
makes no sense to check for a cached ACL as the first thing inside such
inode operations.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes the bug which does not cover a large section case when checking
the sanity of superblock.
If f2fs detects misalignment, it will fix the superblock during the mount time,
so it doesn't need to trigger fsck.f2fs further.
Reported-by: Matthias Prager <linux@matthiasprager.de>
Reported-by: David Gnedt <david.gnedt@davizone.at>
Cc: stable 4.5+ <stable@vger.kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull Ceph updates from Sage Weil:
"There is quite a bit here, including some overdue refactoring and
cleanup on the mon_client and osd_client code from Ilya, scattered
writeback support for CephFS and a pile of bug fixes from Zheng, and a
few random cleanups and fixes from others"
[ I already decided not to pull this because of it having been rebased
recently, but ended up changing my mind after all. Next time I'll
really hold people to it. Oh well. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits)
libceph: use KMEM_CACHE macro
ceph: use kmem_cache_zalloc
rbd: use KMEM_CACHE macro
ceph: use lookup request to revalidate dentry
ceph: kill ceph_get_dentry_parent_inode()
ceph: fix security xattr deadlock
ceph: don't request vxattrs from MDS
ceph: fix mounting same fs multiple times
ceph: remove unnecessary NULL check
ceph: avoid updating directory inode's i_size accidentally
ceph: fix race during filling readdir cache
libceph: use sizeof_footer() more
ceph: kill ceph_empty_snapc
ceph: fix a wrong comparison
ceph: replace CURRENT_TIME by current_fs_time()
ceph: scattered page writeback
libceph: add helper that duplicates last extent operation
libceph: enable large, variable-sized OSD requests
libceph: osdc->req_mempool should be backed by a slab pool
libceph: make r_request msg_size calculation clearer
...
This avoids potential problems caused by a race where the inode gets
renamed out from its parent directory and the parent directory is
deleted while ext4_d_revalidate() is running.
Fixes: 28b4c26396
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
EXT4 may be used as lower layer of overlayfs and accessing f_path.dentry
can lead to a crash.
Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Reported-by: Daniel Axtens <dja@axtens.net>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Fixes: ff978b09f9 ("ext4 crypto: move context consistency check to ext4_file_open()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> # v4.5
In f_op->open() lock on parent is not held, so there's no guarantee that
parent dentry won't go away at any time.
Even after this patch there's no guarantee that 'dir' will stay the parent
of 'inode', but at least it won't be freed while being used.
Fixes: ff978b09f9 ("ext4 crypto: move context consistency check to ext4_file_open()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.5
NFS may be used as lower layer of overlayfs and accessing f_path.dentry can
lead to a crash.
Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.2
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
This series fixes bugs in nfs and ext4 due to 4bacc9c923 ("overlayfs:
Make f_path always point to the overlay and f_inode to the underlay").
Regular files opened on overlayfs will result in the file being opened on
the underlying filesystem, while f_path points to the overlayfs
mount/dentry.
This confuses filesystems which get the dentry from struct file and assume
it's theirs.
Add a new helper, file_dentry() [*], to get the filesystem's own dentry
from the file. This checks file->f_path.dentry->d_flags against
DCACHE_OP_REAL, and returns file->f_path.dentry if DCACHE_OP_REAL is not
set (this is the common, non-overlayfs case).
In the uncommon case it will call into overlayfs's ->d_real() to get the
underlying dentry, matching file_inode(file).
The reason we need to check against the inode is that if the file is copied
up while being open, d_real() would return the upper dentry, while the open
file comes from the lower dentry.
[*] If possible, it's better simply to use file_inode() instead.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: <stable@vger.kernel.org> # v4.2
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Daniel Axtens <dja@axtens.net>
We don't want the writeback triggered from the journal commit (in
data=writeback mode) to cause the journal to abort due to
generic_writepages() returning an ENOMEM error. In addition, if
fsync() fails with ENOMEM, most applications will probably not do the
right thing.
So if we are doing a data integrity sync, and ext4_encrypt() returns
ENOMEM, we will submit any queued I/O to date, and then retry the
allocation using GFP_NOFAIL.
Google-Bug-Id: 27641567
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull orangefs filesystem from Mike Marshall.
This finally merges the long-pending orangefs filesystem, which has been
much cleaned up with input from Al Viro over the last six months. From
the documentation file:
"OrangeFS is an LGPL userspace scale-out parallel storage system. It
is ideal for large storage problems faced by HPC, BigData, Streaming
Video, Genomics, Bioinformatics.
Orangefs, originally called PVFS, was first developed in 1993 by Walt
Ligon and Eric Blumer as a parallel file system for Parallel Virtual
Machine (PVM) as part of a NASA grant to study the I/O patterns of
parallel programs.
Orangefs features include:
- Distributes file data among multiple file servers
- Supports simultaneous access by multiple clients
- Stores file data and metadata on servers using local file system
and access methods
- Userspace implementation is easy to install and maintain
- Direct MPI support
- Stateless"
see Documentation/filesystems/orangefs.txt for more in-depth details.
* tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits)
orangefs: fix orangefs_superblock locking
orangefs: fix do_readv_writev() handling of error halfway through
orangefs: have ->kill_sb() evict the VFS side of things first
orangefs: sanitize ->llseek()
orangefs-bufmap.h: trim unused junk
orangefs: saner calling conventions for getting a slot
orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer
orangefs: get rid of readdir_handle_s
ornagefs: ensure that truncate has an up to date inode size
orangefs: move code which sets i_link to orangefs_inode_getattr
orangefs: remove needless wrapper around GFP_KERNEL
orangefs: remove wrapper around mutex_lock(&inode->i_mutex)
orangefs: refactor inode type or link_target change detection
orangefs: use new getattr for revalidate and remove old getattr
orangefs: use new getattr in inode getattr and permission
orangefs: use new orangefs_inode_getattr to get size in write and llseek
orangefs: use new orangefs_inode_getattr to create new inodes
orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr
orangefs: remove inode->i_lock wrapper
orangefs: put register_chrdev immediately before register_filesystem
...
Commit 0b81d07790 ("fs crypto: move per-file encryption from f2fs
tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and
renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_"
to just "FS" for preprocessor symbols).
Because of the symbol renaming, it's a bit hard to see it as a file
move: use
git show -M30 0b81d07790
to lower the rename detection to just 30% similarity and make git show
the files as renamed (the header file won't be shown as a rename even
then - since all it contains is symbol definitions, it looks almost
completely different).
Even with the renames showing as renames, the diffs are not all that
easy to read, since so much is just the renames. But Eric Biggers
noticed that it's not just all renames: the initialization of the
xts_tweak had been broken too, using the inode number rather than the
page offset.
That's not right - it makes the xfs_tweak the same for all pages of each
inode. It _might_ make sense to make the xfs_tweak contain both the
offset _and_ the inode number, but not just the inode number.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb
* remove from the list _before_ orangefs_unmount() - request_mutex
in the latter will make sure that nothing observed in the loop in
ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end
of loop
* on removal, keep the forward pointer and zero the back one. That
way we can drop and regain the spinlock in the loop body (again,
ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the
rest of the list.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Error should only be returned if nothing had been read/written.
Otherwise we need to report a short read/write instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
a) open files can't have NULL inodes
b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute.
c) make_bad_inode() on lseek()?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
just have it return the slot number or -E... - the caller checks
the sign anyway
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
no point, really - we couldn't keep those across the calls of
getdents(); it would be too easy to DoS, having all slots exhausted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Now function ocfs2_replay_truncate_records() first modifies tl_used,
then calls ocfs2_extend_trans() to extend transactions for gd and alloc
inode used for freeing clusters. jbd2_journal_restart() may be called
and it may happen that tl_used in truncate log is decreased but the
clusters are not freed, which means these clusters are lost. So we
should avoid extending transactions in these two operations.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Acked-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I found that jbd2_journal_restart() is called in some places without
keeping things consistently before. However, jbd2_journal_restart() may
commit the handle's transaction and restart another one. If the first
transaction is committed successfully while another not, it may cause
filesystem inconsistency or read only. This is an effort to fix this
kind of problems.
This patch (of 3):
The following functions will be called while truncating an extent:
ocfs2_remove_btree_range
-> ocfs2_start_trans
-> ocfs2_remove_extent
-> ocfs2_truncate_rec
-> ocfs2_extend_rotate_transaction
-> jbd2_journal_restart if jbd2_journal_extend fail
-> ocfs2_rotate_tree_left
-> ocfs2_remove_rightmost_path
-> ocfs2_extend_rotate_transaction
-> ocfs2_unlink_subtree
-> ocfs2_update_edge_lengths
-> ocfs2_extend_trans
-> jbd2_journal_restart if jbd2_journal_extend fail
-> ocfs2_et_update_clusters
-> ocfs2_commit_trans
jbd2_journal_restart() may be called and it may happened that the buffers
dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in
ocfs2_et_update_clusters() are not, the total clusters on extent tree and
i_clusters in ocfs2_dinode is inconsistency. So the clusters got from
ocfs2_dinode is incorrect, and it also cause read-only problem when call
ocfs2_commit_truncate() with the error message: "Inode %llu has empty
extent block at %llu".
We should extend enough credits for function ocfs2_remove_rightmost_path
and ocfs2_update_edge_lengths to avoid this inconsistency.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Acked-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have found a bug when two nodes doing umount one after another.
1) Node 1 migrate a lockres that has 3 locks in grant queue such as
N2(PR)<->N3(NL)<->N4(PR) to N2. After migration, lvb of the lock
N3(NL) and N4(PR) are empty on node 2 because migration target do not
copy lvb to these two lock.
2) Node 3 want to convert to PR, it can be granted in
__dlmconvert_master(), and the order of these locks is unchanged. The
lvb of the lock N3(PR) on node 2 is copyed from lockres in function
dlm_update_lvb() while the lvb of lock N4(PR) is still empty.
3) Node 2 want to leave domain, it will migrate this lockres to node 3.
Then node 2 will trigger the BUG in dlm_prepare_lvb_for_migration()
when adding the lock N4(PR) to mres with the following message because
the lvb of mres is already copied from lock N3(PR), but the lvb of lock
N4(PR) is empty.
"Mismatched lvb in lock cookie=%u:%llu, name=%.*s, node=%u"
[akpm@linux-foundation.org: tweak comment]
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Acked-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In update_backups() there exists a problem of crossing the boundary as
follows:
we assume that lun will be resized to 1TB(cluster_size is 32kb), it will
include 0~33554431 cluster, in update_backups func, it will backup super
block in location of 1TB which is the 33554432th cluster, so the
phenomenon of crossing the boundary happens.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Xue jiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a deadlock, as follows:
Node 1 Node 2 Node 3
1)volume a and b are only mount vol a only mount vol b
mounted
2) start to mount b start to mount a
3) check hb of Node 3 check hb of Node 2
in vol a, qs_holds++ in vol b, qs_holds++
4) -------------------- all nodes' network down --------------------
5) progress of mount b the same situation as
failed, and then call Node 2
ocfs2_dismount_volume.
but the process is hung,
since there is a work
in ocfs2_wq cannot beo
completed. This work is
about vol a, because
ocfs2_wq is global wq.
BTW, this work which is
scheduled in ocfs2_wq is
ocfs2_orphan_scan_work,
and the context in this work
needs to take inode lock
of orphan_dir, because
lockres owner are Node 1 and
all nodes' nework has been down
at the same time, so it can't
get the inode lock.
6) Why can't this node be fenced
when network disconnected?
Because the process of
mount is hung what caused qs_holds
is not equal 0.
Because all works in the ocfs2_wq are relative to the super block.
The solution is to change the ocfs2_wq from global to local. In other
words, move it into struct ocfs2_super.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Xue jiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When master handles convert request, it queues ast first and then
returns status. This may happen that the ast is sent before the request
status because the above two messages are sent by two threads. And
right after the ast is sent, if master down, it may trigger BUG in
dlm_move_lockres_to_recovery_list in the requested node because ast
handler moves it to grant list without clear lock->convert_pending. So
remove BUG_ON statement and check if the ast is processed in
dlmconvert_remote.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a race window between dlmconvert_remote and
dlm_move_lockres_to_recovery_list, which will cause a lock with
OCFS2_LOCK_BUSY in grant list, thus system hangs.
dlmconvert_remote
{
spin_lock(&res->spinlock);
list_move_tail(&lock->list, &res->converting);
lock->convert_pending = 1;
spin_unlock(&res->spinlock);
status = dlm_send_remote_convert_request();
>>>>>> race window, master has queued ast and return DLM_NORMAL,
and then down before sending ast.
this node detects master down and calls
dlm_move_lockres_to_recovery_list, which will revert the
lock to grant list.
Then OCFS2_LOCK_BUSY won't be cleared as new master won't
send ast any more because it thinks already be authorized.
spin_lock(&res->spinlock);
lock->convert_pending = 0;
if (status != DLM_NORMAL)
dlm_revert_pending_convert(res, lock);
spin_unlock(&res->spinlock);
}
In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set
(res is still in recovering) or res master changed (new master has
finished recovery), reset the status to DLM_RECOVERING, then it will
retry convert.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code should call ocfs2_free_alloc_context() to free meta_ac &
data_ac before calling ocfs2_run_deallocs(). Because
ocfs2_run_deallocs() will acquire the system inode's i_mutex hold by
meta_ac. So try to release the lock before ocfs2_run_deallocs().
Fixes: af1310367f41 ("ocfs2: fix sparse file & data ordering issue in direct io.")
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Acked-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When doing append direct write in an already allocated cluster, and fast
path in ocfs2_dio_get_block() is triggered, function
ocfs2_dio_end_io_write() will be skipped as there is no context
allocated.
As a result, the disk file size will not be changed as it should be.
The solution is to skip fast path when we are about to change file size.
Fixes: af1310367f41 ("ocfs2: fix sparse file & data ordering issue in direct io.")
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Acked-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Take ip_alloc_sem to prevent concurrent access to extent tree, which may
cause the extent tree in an unstable state.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current implementation of unaligned aio+dio, lock order behave as
follow:
in user process context:
-> call io_submit()
-> get i_mutex
<== window1
-> get ip_unaligned_aio
-> submit direct io to block device
-> release i_mutex
-> io_submit() return
in dio work queue context(the work queue is created in __blockdev_direct_IO):
-> release ip_unaligned_aio
<== window2
-> get i_mutex
-> clear unwritten flag & change i_size
-> release i_mutex
There is a limitation to the thread number of dio work queue. 256 at
default. If all 256 thread are in the above 'window2' stage, and there
is a user process in the 'window1' stage, the system will became
deadlock. Since the user process hold i_mutex to wait ip_unaligned_aio
lock, while there is a direct bio hold ip_unaligned_aio mutex who is
waiting for a dio work queue thread to be schedule. But all the dio
work queue thread is waiting for i_mutex lock in 'window2'.
This case only happened in a test which send a large number(more than
256) of aio at one io_submit() call.
My design is to remove ip_unaligned_aio lock. Change it to a sync io
instead. Just like ip_unaligned_aio lock, serialize the unaligned aio
dio.
[akpm@linux-foundation.org: remove OCFS2_IOCB_UNALIGNED_IO, per Junxiao Bi]
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up ocfs2_file_write_iter & ocfs2_prepare_inode_for_write:
* remove append dio check: it will be checked in ocfs2_direct_IO()
* remove file hole check: file hole is supported for now
* remove inline data check: it will be checked in ocfs2_direct_IO()
* remove the full_coherence check when append dio: we will get the
inode_lock in ocfs2_dio_get_block, there is no need to fall back to
buffer io to ensure the coherence semantics.
Now the drop dio procedure is gone. :)
[akpm@linux-foundation.org: remove unused label]
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are mainly three issues in the direct io code path after commit
24c40b329e ("ocfs2: implement ocfs2_direct_IO_write"):
* Does not support sparse file.
* Does not support data ordering. eg: when write to a file hole, it
will alloc extent first. If system crashed before io finished, data
will corrupt.
* Potential risk when doing aio+dio. The -EIOCBQUEUED return value is
likely to be ignored by ocfs2_direct_IO_write().
To resolve above problems, re-design direct io code with following ideas:
* Use buffer io to fill in holes. And this will make better
performance also.
* Clear unwritten after direct write finished. So we can make sure
meta data changes after data write to disk. (Unwritten extent is
invisible to user, from user's view, meta data is not changed when
allocate an unwritten extent.)
* Clear ocfs2_direct_IO_write(). Do all ending work in end_io.
This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4
test cases of ltp.
For performance improvement, see following test result:
ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/.
The original way:
+ rm /mnt/test.img -f
+ dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s
+ rm /mnt/test.img -f
+ dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct
16384+0 records in
16384+0 records out
4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s
After this patch:
+ rm /mnt/test.img -f
+ dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s
+ rm /mnt/test.img -f
+ dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct
16384+0 records in
16384+0 records out
4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
There is still one issue in the direct write procedure.
phase 1: alloc extent with UNWRITTEN flag
phase 2: submit direct data to disk, add zero page to page cache
phase 3: clear UNWRITTEN flag when data has been written to disk
When there are 2 direct write A(0~3KB),B(4~7KB) writing to the same
cluster 0~7KB (cluster size 8KB). Write request A arrive phase 2 first,
it will zero the region (4~7KB). Before request A enter to phase 3,
request B arrive phase 2, it will zero region (0~3KB). This is just like
request B steps request A.
To resolve this issue, we should let request B knows this cluster is already
under zero, to prevent it from steps the previous write request.
This patch will add function ocfs2_unwritten_check() to do this job. It
will record all clusters that are under direct write(it will be recorded
in the 'ip_unwritten_list' member of inode info), and prevent the later
direct write writing to the same cluster to do the zero work again.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
Direct io needs to get the physical address from write_begin, to map the
user page. This patch is to change the arg 'phys' of
ocfs2_write_cluster to a pointer, so it can be retrieved to write_begin.
And we can retrieve it to the direct io procedure.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
Append direct io do not change i_size in get block phase. It only move
to orphan when starting write. After data is written to disk, it will
delete itself from orphan and update i_size. So skip i_size change
section in write_begin for direct io.
And when there is no extents alloc, no meta data changes needed for
direct io (since write_begin start trans for 2 reason: alloc extents &
change i_size. Now none of them needed). So we can skip start trans
procedure.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
Direct io data will not appear in buffer. The w_target_page member will
not be filled by direct io. So avoid to use it when it's NULL. Unlinke
buffer io and mmap, direct io will call write_begin with more than 1
page a time. So the target_index is not sufficient to describe the
actual data. change it to a range start at target_index, end in
end_index.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
There is a problem in ocfs2's direct io implement: if system crashed
after extents allocated, and before data return, we will get a extent
with dirty data on disk. This problem violate the journal=order
semantics, which means meta changes take effect after data written to
disk. To resolve this issue, direct write can use the UNWRITTEN flag to
describe a extent during direct data writeback. The direct write
procedure should act in the following order:
phase 1: alloc extent with UNWRITTEN flag
phase 2: submit direct data to disk, add zero page to page cache
phase 3: clear UNWRITTEN flag when data has been written to disk
This patch is to change the 'c_unwritten' member of
ocfs2_write_cluster_desc to 'c_clear_unwritten'. Means whether to clear
the unwritten flag. It do not care if a extent is allocated or not.
And use 'c_new' to specify a newly allocated extent. So the direct io
procedure can use c_clear_unwritten to control the UNWRITTEN bit on
extent.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patchset: fix ocfs2 direct io code patch to support sparse file and data
ordering semantics
The idea is to use buffer io(more precisely use the interface
ocfs2_write_begin_nolock & ocfs2_write_end_nolock) to do the zero work
beyond block size. And clear UNWRITTEN flag until direct io data has
been written to disk, which can prevent data corruption when system
crashed during direct write.
And we will also archive a better performance: eg. dd direct write new
file with block size 4KB: before this patchset:
2.5 MB/s
after this patchset:
66.4 MB/s
This patch (of 8):
To support direct io in ocfs2_write_begin_nolock &
ocfs2_write_end_nolock.
Remove unused args filp & flags. Add new arg type. The type is one of
buffer/direct/mmap. Indicate 3 way to perform write. buffer/mmap type
has implemented. direct type will be implemented later.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If dentry has no lease, ceph_d_revalidate() previously return 0.
This causes VFS to invalidate the dentry and create a new dentry
for later lookup. Invalidating a dentry also detach any underneath
mount points. So mount point inside cephfs can disapear mystically
(even the mount point is not modified by other hosts).
The fix is using lookup request to revalidate dentry without lease.
This can partly solve the mount points disapear issue (as long as
the mount point is not modified by other hosts)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.
The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)
Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
If page->mapping is NULL, releasepage() callback does not get called.
Remove the unnecessary NULL check to make static code analysis tool
happy
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Readdir cache uses page cache to save dentry pointers. When adding
dentry pointers to middle of a page, we need to make sure the page
already exists. Otherwise the beginning part of the page will be
invalid pointers.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_empty_snapc->num_snaps == 0 at all times. Passing such a snapc to
ceph_osdc_alloc_request() (possibly through ceph_osdc_new_request()) is
equivalent to passing NULL, as ceph_osdc_alloc_request() uses it only
for sizing the request message.
Further, in all four cases the subsequent ceph_osdc_build_request() is
passed NULL for snapc, meaning that 0 is encoded for seq and num_snaps
and making ceph_empty_snapc entirely useless. The two cases where it
actually mattered were removed in commits 8605609049 ("ceph: avoid
sending unnessesary FLUSHSNAP message") and 23078637e0 ("ceph: fix
queuing inode to mdsdir's snaprealm").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
A negative value rc compared to the positive value ENOENT in the
finish_read() function.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch makes ceph_writepages_start() try using single OSD request
to write all dirty pages within a strip unit. When a nonconsecutive
dirty page is found, ceph_writepages_start() tries starting a new write
operation to existing OSD request. If it succeeds, it uses the new
operation to writeback the dirty page.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When rbytes mount option is enabled, directory size is recursive
size. Recursive size is not updated instantly. This can cause
directory size to change between successive stat(1)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime". To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs. Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.
Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).
Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull block fixes from Jens Axboe:
"Final round of fixes for this merge window - some of this has come up
after the initial pull request, and some of it was put in a post-merge
branch before the merge window.
This contains:
- Fix for a bad check for an error on dma mapping in the mtip32xx
driver, from Alexey Khoroshilov.
- A set of fixes for lightnvm, from Javier, Matias, and Wenwei.
- An NVMe completion record corruption fix from Marta, ensuring that
we read things in the right order.
- Two writeback fixes from Tejun, marked for stable@ as well.
- A blk-mq sw queue iterator fix from Thomas, fixing an oops for
sparse CPU maps. They hit this in the hot plug/unplug rework"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: avoid cqe corruption when update at the same time as read
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
blk-mq: Use proper cpumask iterator
mtip32xx: fix checks for dma mapping errors
lightnvm: do not load L2P table if not supported
lightnvm: do not reserve lun on l2p loading
nvme: lightnvm: return ppa completion status
lightnvm: add a bitmap of luns
lightnvm: specify target's logical address area
null_blk: add lightnvm null_blk device to the nullb_list
NAND:
* Add sunxi_nand randomizer support
* begin refactoring NAND ecclayout structs
* fix pxa3xx_nand dmaengine usage
* brcmnand: fix support for v7.1 controller
* add Qualcomm NAND controller driver
SPI NOR:
* add new ls1021a, ls2080a support to Freescale QuadSPI
* add new flash ID entries
* support bottom-block protection for Winbond flash
* support Status Register Write Protect
* remove broken QPI support for Micron SPI flash
JFFS2:
* improve post-mount CRC scan efficiency
General:
* refactor bcm63xxpart parser, to later extend for NAND
* add writebuf size parameter to mtdram
Other minor code quality improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xOlP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"NAND:
- Add sunxi_nand randomizer support
- begin refactoring NAND ecclayout structs
- fix pxa3xx_nand dmaengine usage
- brcmnand: fix support for v7.1 controller
- add Qualcomm NAND controller driver
SPI NOR:
- add new ls1021a, ls2080a support to Freescale QuadSPI
- add new flash ID entries
- support bottom-block protection for Winbond flash
- support Status Register Write Protect
- remove broken QPI support for Micron SPI flash
JFFS2:
- improve post-mount CRC scan efficiency
General:
- refactor bcm63xxpart parser, to later extend for NAND
- add writebuf size parameter to mtdram
Other minor code quality improvements"
* tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits)
mtd: nand: remove kerneldoc for removed function parameter
mtd: nand: Qualcomm NAND controller driver
dt/bindings: qcom_nandc: Add DT bindings
mtd: nand: don't select chip in nand_chip's block_bad op
mtd: spi-nor: support lock/unlock for a few Winbond chips
mtd: spi-nor: add TB (Top/Bottom) protect support
mtd: spi-nor: add SPI_NOR_HAS_LOCK flag
mtd: spi-nor: use BIT() for flash_info flags
mtd: spi-nor: disallow further writes to SR if WP# is low
mtd: spi-nor: make lock/unlock bounds checks more obvious and robust
mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region
mtd: spi-nor: wait for SR_WIP to clear on initial unlock
mtd: nand: simplify nand_bch_init() usage
mtd: mtdswap: remove useless if (!mtd->ecclayout) test
mtd: create an mtd_oobavail() helper and make use of it
mtd: kill the ecclayout->oobavail field
mtd: nand: check status before reporting timeout
mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'
mtd: mtdram: Add parameter for setting writebuf size
mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'
...
for UBI and UBIFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJW9C7iAAoJEEtJtSqsAOnWLSIP/3ijRdZdGCD9QlKQfb0qg+wH
kS0yHiPRp6mabMqPrgvDvF5/+ULRkVdEJef1Pcvs24odB2cH8SmwY7sPXTJIAh49
R9tbAQsgz+nPgplBnCnKaO1Io6aHZ3v4eJZL6UF5Y89B2i8d5zAzql/9Y+a2gFZP
wTCSxVC+NsO1Bf822701pQXON9fTZbBEYomeb1xIIC2paOp3XrBuLIT6grKv+h2Z
wvZ9iCuMzWdPkRoIi/qLUkrWVdsuCt2oN/GqKJn5uSbjybS/bIqUYe5dcm322c2s
vPhcQptgv4zkjHoJd6hyf/hts+y1i1K6NNX3hCGZ1sgL1qldeq5VMAlf+Ksuy9V5
NlfNTU7/AJEJT1DgcuRqvXBP+sB7W/4T3TTphW7sn4uTFMDQ94N3LBkUC7dOkWLg
qOIvBJho1im/gZyZS9g3mwg0h7SCnYCNOoZFTU17f5wCyYCLgVaFWIzcBH4iwPXk
BSADYNv9crYyyV2RDdcYif4QDZ9QwUPanvJdrdH3CsieymboHseMW9N3I53kr3Bq
lU2pRSeQz9aTLCN1l06bkXHHtoE+RWb5oiL3Gy28a+QwW7dluz58NjIRkT6vEost
UzIgvBl5GJTjO7JInrIgwDIuAeznwFkG7xDS0VG9lCki+HlIH4R5SGJdqkFtcVIF
sXeRIQCDh03niv37vwAh
=y4hr
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
"This contains cleanups and a maintainer update for UBI and UBIFS"
* tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs:
ubifs: Remove unused header
MAINTAINERS: Update UBIFS entry
mtd: ubi: Add logging functions ubi_msg, ubi_warn and ubi_err
ubifs: Add logging functions for ubifs_msg, ubifs_err and ubifs_warn
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MToz
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux
Pull more nfsd updates from Bruce Fields:
"Apologies for the previous request, which omitted the top 8 commits
from my for-next branch (including the SCSI layout commits). Thanks
to Trond for spotting my error!"
This actually includes the new layout types, so here's that part of
the pull message repeated:
"Support for a new pnfs layout type from Christoph Hellwig. The new
layout type is a variant of the block layout which uses SCSI features
to offer improved fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission"
* tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux:
nfsd: use short read as well as i_size to set eof
nfsd: better layoutupdate bounds-checking
nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK
nfsd: add SCSI layout support
nfsd: move some blocklayout code
nfsd: add a new config option for the block layout driver
nfs/blocklayout: add SCSI layout support
nfs4.h: add SCSI layout definitions
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mY8w
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Various bugfixes, a RDMA update from Chuck Lever, and support for a
new pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)"
* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
nfsd: recover: fix memory leak
nfsd: fix deadlock secinfo+readdir compound
nfsd4: resfh unused in nfsd4_secinfo
svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
svcrdma: Remove close_out exit path
svcrdma: Hook up the logic to return ERR_CHUNK
svcrdma: Use correct XID in error replies
svcrdma: Make RDMA_ERROR messages work
rpcrdma: Add RPCRDMA_HDRLEN_ERR
svcrdma: svc_rdma_post_recv() should close connection on error
svcrdma: Close connection when a send error occurs
nfsd: Lower NFSv4.1 callback message size limit
svcrdma: Do not send Write chunk XDR pad with inline content
svcrdma: Do not write xdr_buf::tail in a Write chunk
svcrdma: Find client-provided write and reply chunks once per reply
nfsd: Update NFS server comments related to RDMA support
nfsd: Fix a memory leak when meeting unsupported state_protect_how4
nfsd4: fix bad bounds checking
Everything else setting inode->i_ values is in there.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
This is motivated by orangefs_inode_old_getattr's habit of writing over
live inodes.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Use the result of a local read to determine when to set the eof flag. This
allows us to return the location of the end of the file atomically at the
time of the read.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields: add some documentation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
API:
- Fix kzalloc error path crash in ecryptfs added by skcipher
conversion. Note the subject of the commit is screwed up and the
correct subject is actually in the body.
Drivers:
- A number of fixes to the marvell cesa hashing code.
- Remove bogus nested irqsave that clobbers the saved flags in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell/cesa - forward devm_ioremap_resource() error code
crypto: marvell/cesa - initialize hash states
crypto: marvell/cesa - fix memory leak
crypto: ccp - fix lock acquisition code
eCryptfs: Use skcipher and shash
Merge third patch-bomb from Andrew Morton:
- more ocfs2 changes
- a few hotfixes
- Andy's compat cleanups
- misc fixes to fatfs, ptrace, coredump, cpumask, creds, eventfd,
panic, ipmi, kgdb, profile, kfifo, ubsan, etc.
- many rapidio updates: fixes, new drivers.
- kcov: kernel code coverage feature. Like gcov, but not
"prohibitively expensive".
- extable code consolidation for various archs
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits)
ia64/extable: use generic search and sort routines
x86/extable: use generic search and sort routines
s390/extable: use generic search and sort routines
alpha/extable: use generic search and sort routines
kernel/...: convert pr_warning to pr_warn
drivers: dma-coherent: use memset_io for DMA_MEMORY_IO mappings
drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
memremap: add MEMREMAP_WC flag
memremap: don't modify flags
kernel/signal.c: add compile-time check for __ARCH_SI_PREAMBLE_SIZE
mm/mprotect.c: don't imply PROT_EXEC on non-exec fs
ipc/sem: make semctl setting sempid consistent
ubsan: fix tree-wide -Wmaybe-uninitialized false positives
kfifo: fix sparse complaints
scripts/gdb: account for changes in module data structure
scripts/gdb: add cmdline reader command
scripts/gdb: add version command
kernel: add kcov code coverage
profile: hide unused functions when !CONFIG_PROC_FS
hpwdt: use nmi_panic() when kernel panics in NMI handler
...
Since commit e22553e2a2 ("eventfd: don't take the spinlock in
eventfd_poll", 2015-02-17), eventfd is reading ctx->count outside
ctx->wqh.lock.
However, things aren't as simple as the read barrier in eventfd_poll
would suggest. In fact, the read barrier, besides lacking a comment, is
not paired in any obvious manner with another read barrier, and it is
pointless because it is sitting between a write (deep in poll_wait) and
the read of ctx->count. The read barrier is acting just as a compiler
barrier, for which we can use READ_ONCE instead. This is what the code
change in this patch does.
The documentation change is just as important, however. The question,
posed by Andrea Arcangeli, is then why the thing is safe on
architectures where spin_unlock does not imply a store-load memory
barrier. The answer is that it's safe because writes of ctx->count use
the same lock as poll_wait, and hence an acquire barrier implicit in
poll_wait provides the necessary synchronization between eventfd_poll
and callers of wake_up_locked_poll. This is sort of mentioned in the
commit message with respect to eventfd_ctx_read ("eventfd_read is
similar, it will do a single decrement with the lock held") but it
applies to all other callers too. It's tricky enough that it should be
documented in the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:
- The fs.suid_dumpable sysctl is set to 2.
- The kernel.core_pattern sysctl's value starts with "/". (Systems
where kernel.core_pattern starts with "|/" are not affected.)
- Unprivileged user namespace creation is permitted. (This is
true on Linux >=3.8, but some distributions disallow it by
default using a distro patch.)
Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.
To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FAT has long supported its own default file name encoding config
setting, separate from CONFIG_NLS_DEFAULT.
However, if UTF-8 encoded file names are desired FAT character set
should not be set to utf8 since this would make file names case
sensitive even if case insensitive matching is requested. Instead,
"utf8" mount options should be provided to enable UTF-8 file names in
FAT file system.
Unfortunately, there was no possibility to set the default value of this
option so on UTF-8 system "utf8" mount option had to be added manually
to most FAT mounts.
This patch adds config option to set such default value.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext4 treats directory offsets differently for 32-bit and 64-bit callers.
Check the caller type using in_compat_syscall, not is_compat_task. This
changes behavior on SPARC slightly.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement online check or fix inode block during reading a inode block
to memory.
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create online file check sysfile when ocfs2 mount, remove the related
sysfile when ocfs2 umount.
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement online file check sysfile interfaces, e.g. how to create the
related sysfile according to device name, how to display/handle file
check request from the sysfile.
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When there are errors in the ocfs2 filesystem, they are usually
accompanied by the inode number which caused the error. This inode
number would be the input to fixing the file. One of these options
could be considered:
A file in the sys filesytem which would accept inode numbers. This
could be used to communication back what has to be fixed or is fixed.
You could write:
$# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/check
or
$# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/fix
Compare with second version, I re-design filecheck sysfs interfaces,
there are three sysfs files (check, fix and set) under filecheck
directory (see above), sysfs will accept only one argument <inode>.
Second, I adjust some code in ocfs2_filecheck_repair_inode_block()
function according to upstream feedback, we cannot just add VALID_FL
flag back as a inode block fix, then we will not fix this field
corruption currently until having a complete solution. Compare with
first version, I use strncasecmp instead of double strncmp functions.
Second, update the source file contribution vendor.
This patch (of 4):
Export ocfs2_kset object from ocfs2_stackglue kernel module, then online
file check code will create the related sysfiles under ocfs2_kset
object. We're exporting this because it's built in ocfs2_stackglue.ko.
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Highlights include:
Features:
- Add support for multiple NFSv4.1 callbacks in flight
- Initial patchset for RPC multipath support
- Adapt RPC/RDMA to use the new completion queue API
Bugfixes and cleanups:
- nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
- Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
- Fix RPC/RDMA credit accounting
- Properly handle RDMA_ERROR replies
- xprtrdma: Do not wait if ib_post_send() fails
- xprtrdma: Segment head and tail XDR buffers on page boundaries
- xprtrdma cleanups for dprintk, physical_op_map and unused macros
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW8Y7MAAoJEGcL54qWCgDyMsMP+we8JSgfVqI5X1lKpU9aPWkI
D912ybtV58Kv0elKwYvQMqm+mRvdMNz1hZNJa4sAEaPVBOGfFjyZLy3xlDlr0HTf
M+Juh0FNLTcUh1obxJamjsbpNxfg4b6f/Z29KWRzahv/MlpMJVS3hLjpAEzCcTYr
WfOOovV6mragtsBINegGl/6jk/x2D22JDnKcTU+8ltVZGJtZe+HoqTFhUOrLO5qm
wR3YO22fbOuiZxCPoST06kMNiksYnYXnOju8RwlKwFYq3bWke0jWstQtIC4vKs6K
4u5o74aTBL5zMkJPnJuIfN2if4LJPptSr1n7pItbv3MLmgY1mWjE6N2BATpijfhQ
p+Gt/GHTAvswuWrmwySZKLj/Q8EkBuw4ohPFwLQ9eFHl2USoV3G9KQw7H0odR4d1
IyQPCag+suN2lWBreFkPIV48dZyeCVk6JmJmy3SN+d0L1t3jd6gwSO2UBgG7S2Gd
qVbdxYRiU/zYP6E5wFouLhIc1beSfe4vnJqvnuWZrIId+haTE2+OLi7772WGIkSe
xoZVTg7AX4Wu79ZyWoH+e9FnDvEsRkRVv7HQfpsMq2gynBWj70/KemEoeZnjqWaB
UOWcH8/vNLrnwlXTh0VHG6I8t3s0EXgqQB4//tYRLI42oIj35W2pIMnjYt52DeVB
Mo5mbYghtR9bgeoRQ6V4
=kC3t
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- Add support for multiple NFSv4.1 callbacks in flight
- Initial patchset for RPC multipath support
- Adapt RPC/RDMA to use the new completion queue API
Bugfixes and cleanups:
- nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
- Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
- Fix RPC/RDMA credit accounting
- Properly handle RDMA_ERROR replies
- xprtrdma: Do not wait if ib_post_send() fails
- xprtrdma: Segment head and tail XDR buffers on page boundaries
- xprtrdma cleanups for dprintk, physical_op_map and unused macros"
* tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (35 commits)
nfs/blocklayout: make sure making a aligned read request
nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
nfs: remove nfs_inode_dio_wait
nfs: remove nfs4_file_fsync
xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
xprtrdma: Use an anonymous union in struct rpcrdma_mw
xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
xprtrdma: Serialize credit accounting again
xprtrdma: Properly handle RDMA_ERROR replies
rpcrdma: Add RPCRDMA_HDRLEN_ERR
xprtrdma: Do not wait if ib_post_send() fails
xprtrdma: Segment head and tail XDR buffers on page boundaries
xprtrdma: Clean up dprintk format string containing a newline
xprtrdma: Clean up physical_op_map()
xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback
pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3
SUNRPC: Allow addition of new transports to a struct rpc_clnt
NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections
SUNRPC: Make NFS swap work with multipath
...
We aren't checking to see if the in-inode extended attribute is
corrupted before we try to expand the inode's extra isize fields.
This can lead to potential crashes caused by the BUG_ON() check in
ext4_xattr_shift_entries().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull overlayfs updates from Miklos Szeredi:
"Various fixes and tweaks"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: cleanup unused var in rename2
ovl: rename is_merge to is_lowest
ovl: fixed coding style warning
ovl: Ensure upper filesystem supports d_type
ovl: Warn on copy up if a process has a R/O fd open to the lower file
ovl: honor flag MS_SILENT at mount
ovl: verify upper dentry before unlink and rename
Pull fuse update from Miklos Szeredi:
"This contains direct I/O fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: return patrial success from fuse_direct_io()
fuse: Add reference counting for fuse_io_priv
fuse: do not use iocb after it may have been freed
You could add any multiple of 2^32/PNFS_SCSI_RANGE_SIZE to nr_iomaps and
still pass this check. You'd probably still fail the following kcalloc,
but best to be paranoid since this is from-the-wire data.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
transaction_kthread() is calling try_to_freeze(), but that's just an
expeinsive no-op given the fact that the thread is not marked freezable.
After removing this, disk-io.c is now independent on freezer API.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
cleaner_kthread() is not marked freezable, and therefore calling
try_to_freeze() in its context is a pointless no-op.
In addition to that, as has been clearly demonstrated by 80ad623edd
("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"), it's perfectly
valid / legal for cleaner_kthread() to stay scheduled out in an arbitrary
place during suspend (in that particular example that was waiting for
reading of extent pages), so there is no need to leave any traces of
freezer in this kthread.
Fixes: 80ad623edd ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()")
Fixes: 6962491321 ("btrfs: clear PF_NOFREEZE in cleaner_kthread()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
csum_dirty_buffer was issuing a warning in case the extent buffer
did not look alright, but was still returning success.
Let's return error in this case, and also add an additional sanity
check on the extent buffer header.
The caller up the chain may BUG_ON on this, for example flush_epd_write_bio will,
but it is better than to have a silent metadata corruption on disk.
Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from Chris Mason:
"We have a good sized cleanup of our internal read ahead code, and the
first series of commits from Chandan to enable PAGE_SIZE > sectorsize
Otherwise, it's a normal series of cleanups and fixes, with many
thanks to Dave Sterba for doing most of the patch wrangling this time"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits)
btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums
btrfs: Fix misspellings in comments.
btrfs: Print Warning only if ENOSPC_DEBUG is enabled
btrfs: scrub: silence an uninitialized variable warning
btrfs: move btrfs_compression_type to compression.h
btrfs: rename btrfs_print_info to btrfs_print_mod_info
Btrfs: Show a warning message if one of objectid reaches its highest value
Documentation: btrfs: remove usage specific information
btrfs: use kbasename in btrfsic_mount
Btrfs: do not collect ordered extents when logging that inode exists
Btrfs: fix race when checking if we can skip fsync'ing an inode
Btrfs: fix listxattrs not listing all xattrs packed in the same item
Btrfs: fix deadlock between direct IO reads and buffered writes
Btrfs: fix extent_same allowing destination offset beyond i_size
Btrfs: fix file loss on log replay after renaming a file and fsync
Btrfs: fix unreplayable log after snapshot delete + parent dir fsync
Btrfs: fix lockdep deadlock warning due to dev_replace
btrfs: drop unused argument in btrfs_ioctl_get_supported_features
btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls
btrfs: change max_inline default to 2048
...
Pull UDF and quota updates from Jan Kara:
"This contains a rewrite of UDF handling of filename encoding to fix
remaining overflow issues from Andrew Gabbasov and quota changes to
support new Q_[X]GETNEXTQUOTA quotactl for VFS quota formats"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix possible GPF due to uninitialised pointers
ext4: Make Q_GETNEXTQUOTA work for quota in hidden inodes
quota: Forbid Q_GETQUOTA and Q_GETNEXTQUOTA for frozen filesystem
quota: Fix possible races during quota loading
ocfs2: Implement get_next_id()
quota_v2: Implement get_next_id() for V2 quota format
quota: Add support for ->get_nextdqblk() for VFS quota
udf: Merge linux specific translation into CS0 conversion function
udf: Remove struct ustr as non-needed intermediate storage
udf: Use separate buffer for copying split names
udf: Adjust UDF_NAME_LEN to better reflect actual restrictions
udf: Join functions for UTF8 and NLS conversions
udf: Parameterize output length in udf_put_filename
quota: Allow Q_GETQUOTA for frozen filesystem
quota: Fixup comments about return value of Q_[X]GETNEXTQUOTA
Change summary:
o error propagation for direct IO failures fixes for both XFS and ext4
o new quota interfaces and XFS implementation for iterating all the quota IDs
in the filesystem
o locking fixes for real-time device extent allocation
o reduction of duplicate information in the xfs and vfs inode, saving roughly
100 bytes of memory per cached inode.
o buffer flag cleanup
o rework of the writepage code to use the generic write clustering mechanisms
o several fixes for inode flag based DAX enablement
o rework of remount option parsing
o compile time verification of on-disk format structure sizes
o delayed allocation reservation overrun fixes
o lots of little error handling fixes
o small memory leak fixes
o enable xfsaild freezing again
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZoiX
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There's quite a lot in this request, and there's some cross-over with
ext4, dax and quota code due to the nature of the changes being made.
As for the rest of the XFS changes, there are lots of little things
all over the place, which add up to a lot of changes in the end.
The major changes are that we've reduced the size of the struct
xfs_inode by ~100 bytes (gives an inode cache footprint reduction of
>10%), the writepage code now only does a single set of mapping tree
lockups so uses less CPU, delayed allocation reservations won't
overrun under random write loads anymore, and we added compile time
verification for on-disk structure sizes so we find out when a commit
or platform/compiler change breaks the on disk structure as early as
possible.
Change summary:
- error propagation for direct IO failures fixes for both XFS and
ext4
- new quota interfaces and XFS implementation for iterating all the
quota IDs in the filesystem
- locking fixes for real-time device extent allocation
- reduction of duplicate information in the xfs and vfs inode, saving
roughly 100 bytes of memory per cached inode.
- buffer flag cleanup
- rework of the writepage code to use the generic write clustering
mechanisms
- several fixes for inode flag based DAX enablement
- rework of remount option parsing
- compile time verification of on-disk format structure sizes
- delayed allocation reservation overrun fixes
- lots of little error handling fixes
- small memory leak fixes
- enable xfsaild freezing again"
* tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits)
xfs: always set rvalp in xfs_dir2_node_trim_free
xfs: ensure committed is initialized in xfs_trans_roll
xfs: borrow indirect blocks from freed extent when available
xfs: refactor delalloc indlen reservation split into helper
xfs: update freeblocks counter after extent deletion
xfs: debug mode forced buffered write failure
xfs: remove impossible condition
xfs: check sizes of XFS on-disk structures at compile time
xfs: ioends require logically contiguous file offsets
xfs: use named array initializers for log item dumping
xfs: fix computation of inode btree maxlevels
xfs: reinitialise per-AG structures if geometry changes during recovery
xfs: remove xfs_trans_get_block_res
xfs: fix up inode32/64 (re)mount handling
xfs: fix format specifier , should be %llx and not %llu
xfs: sanitize remount options
xfs: convert mount option parsing to tokens
xfs: fix two memory leaks in xfs_attr_list.c error paths
xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE
xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared
...
Pull f2fs updates from Jaegeuk Kim:
"New Features:
- uplift filesystem encryption into fs/crypto/
- give sysfs entries to control memroy consumption
Enhancements:
- aio performance by preallocating blocks in ->write_iter
- use writepages lock for only WB_SYNC_ALL
- avoid redundant inline_data conversion
- enhance forground GC
- use wait_for_stable_page as possible
- speed up SEEK_DATA and fiiemap
Bug Fixes:
- corner case in terms of -ENOSPC for inline_data
- hung task caused by long latency in shrinker
- corruption between atomic write and f2fs_trace_pid
- avoid garbage lengths in dentries
- revoke atomicly written pages if an error occurs
In addition, there are various minor bug fixes and clean-ups"
* tag 'for-f2fs-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
f2fs: submit node page write bios when really required
f2fs: add missing argument to f2fs_setxattr stub
f2fs: fix to avoid unneeded unlock_new_inode
f2fs: clean up opened code with f2fs_update_dentry
f2fs: declare static functions
f2fs: use cryptoapi crc32 functions
f2fs: modify the readahead method in ra_node_page()
f2fs crypto: sync ext4_lookup and ext4_file_open
fs crypto: move per-file encryption from f2fs tree to fs/crypto
f2fs: mutex can't be used by down_write_nest_lock()
f2fs: recovery missing dot dentries in root directory
f2fs: fix to avoid deadlock when merging inline data
f2fs: introduce f2fs_flush_merged_bios for cleanup
f2fs: introduce f2fs_update_data_blkaddr for cleanup
f2fs crypto: fix incorrect positioning for GCing encrypted data page
f2fs: fix incorrect upper bound when iterating inode mapping tree
f2fs: avoid hungtask problem caused by losing wake_up
f2fs: trace old block address for CoWed page
f2fs: try to flush inode after merging inline data
f2fs: show more info about superblock recovery
...
Pull cgroup namespace support from Tejun Heo:
"These are changes to implement namespace support for cgroup which has
been pending for quite some time now. It is very straight-forward and
only affects what part of cgroup hierarchies are visible.
After unsharing, mounting a cgroup fs will be scoped to the cgroups
the task belonged to at the time of unsharing and the cgroup paths
exposed to userland would be adjusted accordingly"
* 'for-4.6-ns' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix and restructure error handling in copy_cgroup_ns()
cgroup: fix alloc_cgroup_ns() error handling in copy_cgroup_ns()
Add FS_USERNS_FLAG to cgroup fs
cgroup: Add documentation for cgroup namespaces
cgroup: mount cgroupns-root when inside non-init cgroupns
kernfs: define kernfs_node_dentry
cgroup: cgroup namespace setns support
cgroup: introduce cgroup namespaces
sched: new clone flag CLONE_NEWCGROUP for cgroup namespace
kernfs: Add API to generate relative kernfs path
Only treat write goes up to the inode size as aligned request,
because it always write PAGE_CACHE_SIZE, but read a dynamic size.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The 'is_merge' is an historical naming from when only a single lower layer
could exist. With the introduction of multiple lower layers the meaning of
this flag was changed to mean only the "lowest layer" (while all lower
layers were being merged).
So now 'is_merge' is inaccurate and hence renaming to 'is_lowest'
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch fixes a newline warning found by the checkpatch.pl tool
Signed-off-by: Sohom-Bhattacharjee <soham.bhattacharjee15@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In some instances xfs has been created with ftype=0 and there if a file
on lower fs is removed, overlay leaves a whiteout in upper fs but that
whiteout does not get filtered out and is visible to overlayfs users.
And reason it does not get filtered out because upper filesystem does
not report file type of whiteout as DT_CHR during iterate_dir().
So it seems to be a requirement that upper filesystem support d_type for
overlayfs to work properly. Do this check during mount and fail if d_type
is not supported.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Print a warning when overlayfs copies up a file if the process that
triggered the copy up has a R/O fd open to the lower file being copied up.
This can help catch applications that do things like the following:
fd1 = open("foo", O_RDONLY);
fd2 = open("foo", O_RDWR);
where they expect fd1 and fd2 to refer to the same file - which will no
longer be the case post-copy up.
With this patch, the following commands:
bash 5</mnt/a/foo128
6<>/mnt/a/foo128
assuming /mnt/a/foo128 to be an un-copied up file on an overlay will
produce the following warning in the kernel log:
overlayfs: Copying up foo129, but open R/O on fd 5 which will cease
to be coherent [pid=3818 bash]
This is enabled by setting:
/sys/module/overlay/parameters/check_copy_up
to 1.
The warnings are ratelimited and are also limited to one warning per file -
assuming the copy up completes in each case.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch hides error about missing lowerdir if MS_SILENT is set.
We use mount(NULL, "/", "overlay", MS_SILENT, NULL) for testing support of
overlayfs: syscall returns -ENODEV if it's not supported. Otherwise kernel
automatically loads module and returns -EINVAL because lowerdir is missing.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Unlink and rename in overlayfs checked the upper dentry for staleness by
verifying upper->d_parent against upperdir. However the dentry can go
stale also by being unhashed, for example.
Expand the verification to actually look up the name again (under parent
lock) and check if it matches the upper dentry. This matches what the VFS
does before passing the dentry to filesytem's unlink/rename methods, which
excludes any inconsistency caused by overlayfs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit c40a3d38af (Btrfs: Compute and look up csums based on
sectorsized blocks) changes around how we walk the bios while looking up
crcs. There's an inner loop that is jumping to the next bvec based on
sectors and before it derefs the next bvec, it needs to make sure we're
still in the bio.
In this case, the outer loop would have decided to stop moving forward
too, and the bvec deref is never actually used for anything. But
CONFIG_DEBUG_PAGEALLOC catches it because we're outside our bio.
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Pull x86 protection key support from Ingo Molnar:
"This tree adds support for a new memory protection hardware feature
that is available in upcoming Intel CPUs: 'protection keys' (pkeys).
There's a background article at LWN.net:
https://lwn.net/Articles/643797/
The gist is that protection keys allow the encoding of
user-controllable permission masks in the pte. So instead of having a
fixed protection mask in the pte (which needs a system call to change
and works on a per page basis), the user can map a (handful of)
protection mask variants and can change the masks runtime relatively
cheaply, without having to change every single page in the affected
virtual memory range.
This allows the dynamic switching of the protection bits of large
amounts of virtual memory, via user-space instructions. It also
allows more precise control of MMU permission bits: for example the
executable bit is separate from the read bit (see more about that
below).
This tree adds the MM infrastructure and low level x86 glue needed for
that, plus it adds a high level API to make use of protection keys -
if a user-space application calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
this special case, and will set a special protection key on this
memory range. It also sets the appropriate bits in the Protection
Keys User Rights (PKRU) register so that the memory becomes unreadable
and unwritable.
So using protection keys the kernel is able to implement 'true'
PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
PROT_READ as well. Unreadable executable mappings have security
advantages: they cannot be read via information leaks to figure out
ASLR details, nor can they be scanned for ROP gadgets - and they
cannot be used by exploits for data purposes either.
We know about no user-space code that relies on pure PROT_EXEC
mappings today, but binary loaders could start making use of this new
feature to map binaries and libraries in a more secure fashion.
There is other pending pkeys work that offers more high level system
call APIs to manage protection keys - but those are not part of this
pull request.
Right now there's a Kconfig that controls this feature
(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
(like most x86 CPU feature enablement code that has no runtime
overhead), but it's not user-configurable at the moment. If there's
any serious problem with this then we can make it configurable and/or
flip the default"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
mm/core, x86/mm/pkeys: Add execute-only protection keys support
x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
x86/mm/pkeys: Allow kernel to modify user pkey rights register
x86/fpu: Allow setting of XSAVE state
x86/mm: Factor out LDT init from context init
mm/core, x86/mm/pkeys: Add arch_validate_pkey()
mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
x86/mm/pkeys: Add Kconfig prompt to existing config option
x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
x86/mm/pkeys: Dump PKRU with other kernel registers
mm/core, x86/mm/pkeys: Differentiate instruction fetches
x86/mm/pkeys: Optimize fault handling in access_error()
mm/core: Do not enforce PKEY permissions on remote mm access
um, pkeys: Add UML arch_*_access_permitted() methods
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
x86/mm/gup: Simplify get_user_pages() PTE bit handling
...
UBIFS does not support POSIX ACLs, so there is no need for including any
POSIX ACL hesders.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The existing logging macros are fairly large and converting the
macros to functions make the object code smaller.
Use %pV and __builtin_return_address(0) as appropriate.
$ size fs/ubifs/built-in.o*
text data bss dec hex filename
575831 309688 161312 1046831 ff92f fs/ubifs/built-in.o.allyesconfig.new
622457 312872 161120 1096449 10bb01 fs/ubifs/built-in.o.allyesconfig.old
223785 640 644 225069 36f2d fs/ubifs/built-in.o.defconfig.new
251873 640 644 253157 3dce5 fs/ubifs/built-in.o.defconfig.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When cgroup writeback is in use, there can be multiple wb's
(bdi_writeback's) per bdi and an inode may switch among them
dynamically. In a couple places, the wrong wb was used leading to
performing operations on the wrong list under the wrong lock
corrupting the io lists.
* writeback_single_inode() was taking @wb parameter and used it to
remove the inode from io lists if it becomes clean after writeback.
The callers of this function were always passing in the root wb
regardless of the actual wb that the inode was associated with,
which could also change while writeback is in progress.
Fix it by dropping the @wb parameter and using
inode_to_wb_and_lock_list() to determine and lock the associated wb.
* After writeback_sb_inodes() writes out an inode, it re-locks @wb and
inode to remove it from or move it to the right io list. It assumes
that the inode is still associated with @wb; however, the inode may
have switched to another wb while writeback was in progress.
Fix it by using inode_to_wb_and_lock_list() to determine and lock
the associated wb after writeback is complete. As the function
requires the original @wb->list_lock locked for the next iteration,
in the unlikely case where the inode has changed association, switch
the locks.
Kudos to Tahsin for pinpointing these subtle breakages.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: d10c809552 ("writeback: implement foreign cgroup inode bdi_writeback switching")
Link: http://lkml.kernel.org/g/CAAeU0aMYeM_39Y2+PaRvyB1nqAPYZSNngJ1eBRmrxn7gKAt2Mg@mail.gmail.com
Reported-and-diagnosed-by: Tahsin Erdogan <tahsin@google.com>
Tested-by: Tahsin Erdogan <tahsin@google.com>
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Jens Axboe <axboe@fb.com>
locked_inode_to_wb_and_lock_list() wb_get()'s the wb associated with
the target inode, unlocks inode, locks the wb's list_lock and verifies
that the inode is still associated with the wb. To prevent the wb
going away between dropping inode lock and acquiring list_lock, the wb
is pinned while inode lock is held. The wb reference is put right
after acquiring list_lock citing that the wb won't be dereferenced
anymore.
This isn't true. If the inode is still associated with the wb, the
inode has reference and it's safe to return the wb; however, if inode
has been switched, the wb still needs to be unlocked which is a
dereference and can lead to use-after-free if it it races with wb
destruction.
Fix it by putting the reference after releasing list_lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 87e1d789bf ("writeback: implement [locked_]inode_to_wb_and_lock_list()")
Cc: stable@vger.kernel.org # v4.2+
Tested-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
Merge second patch-bomb from Andrew Morton:
- a couple of hotfixes
- the rest of MM
- a new timer slack control in procfs
- a couple of procfs fixes
- a few misc things
- some printk tweaks
- lib/ updates, notably to radix-tree.
- add my and Nick Piggin's old userspace radix-tree test harness to
tools/testing/radix-tree/. Matthew said it was a godsend during the
radix-tree work he did.
- a few code-size improvements, switching to __always_inline where gcc
screwed up.
- partially implement character sets in sscanf
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
sscanf: implement basic character sets
lib/bug.c: use common WARN helper
param: convert some "on"/"off" users to strtobool
lib: add "on"/"off" support to kstrtobool
lib: update single-char callers of strtobool()
lib: move strtobool() to kstrtobool()
include/linux/unaligned: force inlining of byteswap operations
include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
usb: common: convert to use match_string() helper
ide: hpt366: convert to use match_string() helper
ata: hpt366: convert to use match_string() helper
power: ab8500: convert to use match_string() helper
power: charger_manager: convert to use match_string() helper
drm/edid: convert to use match_string() helper
pinctrl: convert to use match_string() helper
device property: convert to use match_string() helper
lib/string: introduce match_string() helper
radix-tree tests: add test for radix_tree_iter_next
radix-tree tests: add regression3 test
...
Pull core block updates from Jens Axboe:
"Here are the core block changes for this merge window. Not a lot of
exciting stuff going on in this round, most of the changes have been
on the driver side of things. That pull request is coming next. This
pull request contains:
- A set of fixes for chained bio handling from Christoph.
- A tag bounds check for blk-mq from Hannes, ensuring that we don't
do something stupid if a device reports an invalid tag value.
- A set of fixes/updates for the CFQ IO scheduler from Jan Kara.
- A set of blk-mq fixes from Keith, adding support for dynamic
hardware queues, and fixing init of max_dev_sectors for stacking
devices.
- A fix for the dynamic hw context from Ming.
- Enabling of cgroup writeback support on a block device, from
Shaohua"
* 'for-4.6/core' of git://git.kernel.dk/linux-block:
blk-mq: add bounds check on tag-to-rq conversion
block: bio_remaining_done() isn't unlikely
block: cleanup bio_endio
block: factor out chained bio completion
block: don't unecessarily clobber bi_error for chained bios
block-dev: enable writeback cgroup support
blk-mq: Fix NULL pointer updating nr_requests
blk-mq: mark request queue as mq asap
block: Initialize max_dev_sectors to 0
blk-mq: dynamic h/w context count
cfq-iosched: Allow parent cgroup to preempt its child
cfq-iosched: Allow sync noidle workloads to preempt each other
cfq-iosched: Reorder checks in cfq_should_preempt()
cfq-iosched: Don't group_idle if cfqq has big thinktime
Running the following command:
busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null
with any tracing enabled pretty very quickly leads to various NULL
pointer dereferences and VM BUG_ON()s, such as these:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40
Call Trace:
[<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
[<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
[<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
[<ffffffff81196869>] do_sendfile+0x199/0x380
[<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
[<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d
page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
kernel BUG at include/linux/mm.h:367!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40
Call Trace:
[<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0
[<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10
[<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0
[<ffffffff81196869>] do_sendfile+0x199/0x380
[<ffffffff81197600>] SyS_sendfile64+0x90/0xa0
[<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89
(busybox's cat uses sendfile(2), unlike the coreutils version)
This is because tracing_splice_read_pipe() can call splice_to_pipe()
with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and
we fill the page pointers and the other fields of the pipe_buffers with
garbage.
All other callers of splice_to_pipe() avoid calling it when nr_pages ==
0, and we could make tracing_splice_read_pipe() do that too, but it
seems reasonable to have splice_to_page() handle this condition
gracefully.
Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a simple extension to the block layout driver to use SCSI
persistent reservations for access control and fencing, as well as
SCSI VPD pages for device identification.
For this we need to pass the nfs4_client to the proc_getdeviceinfo method
to generate the reservation key, and add a new fence_client method
to allow for fence actions in the layout driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trivial reorganization, no change in behavior. Move some code around,
pull some code out of block layoutcommit that will be useful for the
scsi layout.
[bfields@redhat.com: split off from "nfsd: add SCSI layout support"]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split the config symbols into a generic pNFS one, which is invisible
and gets selected by the layout drivers, and one for the block layout
driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a trivial extension to the block layout driver to support the
new SCSI layouts draft. There are three changes:
- device identifcation through the SCSI VPD page. This allows us to
directly use the udev generated persistent device names instead of
requiring an expensive lookup by crawling every block device node
in /dev and reading a signature for it.
- use of SCSI persistent reservations to protect device access and
allow for robust fencing. On the client sides this just means
registering and unregistering a server supplied key.
- an optimized LAYOUTCOMMIT payload that doesn't send unessecary
fields to the server.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If many threads calls fsync with data writes, we don't need to flush every
bios having node page writes.
The f2fs_wait_on_page_writeback will flush its bios when the page is really
needed.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_setxattr() prototype for CONFIG_F2FS_FS_XATTR=n has
been wrong for a long time, since 8ae8f1627f ("f2fs: support
xattr security labels"), but there have never been any callers,
so it did not matter.
Now, the function gets called from f2fs_ioc_keyctl(), which
causes a build failure:
fs/f2fs/file.c: In function 'f2fs_ioc_keyctl':
include/linux/stddef.h:7:14: error: passing argument 6 of 'f2fs_setxattr' makes integer from pointer without a cast [-Werror=int-conversion]
#define NULL ((void *)0)
^
fs/f2fs/file.c:1599:27: note: in expansion of macro 'NULL'
value, F2FS_KEY_SIZE, NULL, type);
^
In file included from ../fs/f2fs/file.c:29:0:
fs/f2fs/xattr.h:129:19: note: expected 'int' but argument is of type 'void *'
static inline int f2fs_setxattr(struct inode *inode, int index,
^
fs/f2fs/file.c:1597:9: error: too many arguments to function 'f2fs_setxattr'
return f2fs_setxattr(inode, F2FS_XATTR_INDEX_KEY,
^
In file included from ../fs/f2fs/file.c:29:0:
fs/f2fs/xattr.h:129:19: note: declared here
static inline int f2fs_setxattr(struct inode *inode, int index,
Thsi changes the prototype of the empty stub function to match
that of the actual implementation. This will not make the key
management work when F2FS_FS_XATTR is disabled, but it gets it
to build at least.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During ->lookup, I_NEW state of inode was been cleared in f2fs_iget,
so in error path, we don't need to clear it again.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just clean up opened code with existing function, no logic change.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The crc function is done bit by bit.
Optimize this by use cryptoapi
crc32 function which is backed by h/w acceleration.
Signed-off-by: Keith Mok <ek9852@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
ra_node_page() is used to read ahead one node page. Comparing to regular
read, it's faster because it doesn't wait for IO completion.
But if it is called twice for reading the same block, and the IO request
from the first call hasn't been completed before the second call, the second
call will have to wait until the read is over.
Here use the code in __do_page_cache_readahead() to solve this problem.
It does nothing when someone else already puts the page in mapping. The
status of page should be assured by whoever puts it there.
This implement also prevents alteration of page reference count.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds the renamed functions moved from the f2fs crypto files.
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vPCf
-----END PGP SIGNATURE-----
Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull pstore update from Tony Luck:
"Allow ram backend to be configured with addresses above 4GB"
* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
pstore: Add support for 64 Bit address space
We only have six patches ready for this merge window.
- Arnd Bergmann contributed a patch that fixes an uninitialized variable
warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct IO
write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being reused
to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be needed, and
which interfered with the transition of dinodes from unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not needed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6qcKAAoJENeLYdPf93o70SwH/0czrFBIWaPbRgyuGLNvye4G
qvfIk2Yky3UKfgUA+ZW+cAWkxeKubc9scMwce0elKxm0e03rNwIX0slIOx8hymj3
19AgMnj3kcCJvRLdkBITNqnd6vTY2quadLN3j8I2cCNbHOV0GelEkP4jWcTHB+2F
AG0ZJOsvvrcD1ClgdIvGdV52qipZApS/kgZjLpJBEyzxq8SpRe9vNqMDsDyoKWgi
yjp0+aJ0IJAWA24fzdT5HE4fb5yGRWehg51l6Z2mbfXAvT+oeKcYrQiq1zhUutHw
dT6SUHbjt+y0EulPClsf3r5zjRjVCCbpj0wkUY3kPB98lgnpAD2QnUP/JDA+CD0=
=xRmX
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We only have six patches ready for this merge window:
- Arnd Bergmann contributed a patch that fixes an uninitialized
variable warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct
IO write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being
reused to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be
needed, and which interfered with the transition of dinodes from
unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not
needed"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Eliminate parameter non_block on gfs2_inode_lookup
GFS2: Don't filter out I_FREEING inodes anymore
GFS2: Prevent delete work from occurring on glocks used for create
GFS2: Fix direct IO write rounding error
gfs2: avoid uninitialized variable warning
GFS2: Check if iopen is held when deleting inode
Previous changes introduced the use of socket error reporting
for dlm sockets. This set includes two fixes in how the
socket error callbacks are used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qvzY
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"Previous changes introduced the use of socket error reporting for dlm
sockets. This set includes two fixes in how the socket error
callbacks are used"
* tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
DLM: Save and restore socket callbacks properly
DLM: Replace nodeid_to_addr with kernel_getpeername
improvements, plus a lot of clean ups and bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW6c9mAAoJEPL5WVaVDYGjWsEIAJkWUvKB3GgGgP82sKDBP2P8
IbWegO1ICMrSY78BqLI7mLCqggH5JClBgYU3O4VFv8Brj1L9mS5X+vflaDE1j9jj
Ik1KZKtZl1opOwO1L3D4l/ipZAiENUp7NehTtpsFousmz6nMZ5vo6x4t3QSwbUIm
YXpxUIxHEhBcW5i3EDkfYG8305V5oj8HsVf6T98OlWGpBO5VGNMAHvA7CQdQe7Rd
chv70rij5V684bJAEoosEFXVAuOUrxcBqbFA3Nlb432YOPj0ISLx76kw0GIjUYtf
yjoSClbRgwxGzh0jm+yaoYjjm83xbsYbHSsBmh3+/QLMbKTLXeCqR/BiqJavmcM=
=bWpz
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Performance improvements in SEEK_DATA and xattr scalability
improvements, plus a lot of clean ups and bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (38 commits)
ext4: clean up error handling in the MMP support
jbd2: do not fail journal because of frozen_buffer allocation failure
ext4: use __GFP_NOFAIL in ext4_free_blocks()
ext4: fix compile error while opening the macro DOUBLE_CHECK
ext4: print ext4 mount option data_err=abort correctly
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
ext4: drop unneeded BUFFER_TRACE in ext4_delete_inline_entry()
ext4: fix misspellings in comments.
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
ext4: more efficient SEEK_DATA implementation
ext4: cleanup handling of bh->b_state in DAX mmap
ext4: return hole from ext4_map_blocks()
ext4: factor out determining of hole size
ext4: fix setting of referenced bit in ext4_es_lookup_extent()
ext4: remove i_ioend_count
ext4: simplify io_end handling for AIO DIO
ext4: move trans handling and completion deferal out of _ext4_get_block
ext4: rename and split get blocks functions
ext4: use i_mutex to serialize unaligned AIO DIO
ext4: pack ioend structure better
...
- A large patch from me to simplify setting up the list of default
groups by actually implementing it as a list instead of an array.
- a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter
on it's own, but it seems like he is trying to get rid of all CURRENT_TIME
uses in file systems, which is a worthwhile goal.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9HqT
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
- A large patch from me to simplify setting up the list of default
groups by actually implementing it as a list instead of an array.
- a small Y2083 prep patch from Deepa Dinamani. Probably doesn't
matter on it's own, but it seems like he is trying to get rid of all
CURRENT_TIME uses in file systems, which is a worthwhile goal.
* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
configfs: switch ->default groups to a linked list
configfs: Replace CURRENT_TIME by current_fs_time()
Some callers of strtobool() were passing a pointer to unterminated
strings. In preparation of adding multi-character processing to
kstrtobool(), update the callers to not pass single-character pointers,
and switch to using the new kstrtobool_from_user() helper where
possible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Steve French <sfrench@samba.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though this is a 'can't happen' situation, use the new
radix_tree_iter_retry() pattern to eliminate a goto.
[akpm@linux-foundation.org: fix btrfs build]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On i686 PAE enabled machine the contiguous physical area could be large
and it can cause trimming down variables in below calculation in
read_vmcore() and mmap_vmcore():
tsz = min_t(size_t, m->offset + m->size - *fpos, buflen);
That is, the types being used is like below on i686:
m->offset: unsigned long long int
m->size: unsigned long long int
*fpos: loff_t (long long int)
buflen: size_t (unsigned int)
So casting (m->offset + m->size - *fpos) by size_t means truncating a
given value by 4GB.
Suppose (m->offset + m->size - *fpos) being truncated to 0, buflen >0
then we will get tsz = 0. It is of course not an expected result.
Similarly we could also get other truncated values less than buflen.
Then the real size passed down is not correct any more.
If (m->offset + m->size - *fpos) is above 4GB, read_vmcore or
mmap_vmcore use the min_t result with truncated values being compared to
buflen. Then, fpos proceeds with the wrong value so that we reach below
bugs:
1) read_vmcore will refuse to continue so makedumpfile fails.
2) mmap_vmcore will trigger BUG_ON() in remap_pfn_range().
Use unsigned long long in min_t instead so that the variables in are not
truncated.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Cc: Minfei Huang <mhuang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is not elegant that prompt shell does not start from new line after
executing "cat /proc/$pid/wchan". Make prompt shell start from new
line.
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`proc_timers_operations` is only used when CONFIG_CHECKPOINT_RESTORE is
enabled.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch provides a proc/PID/timerslack_ns interface which exposes a
task's timerslack value in nanoseconds and allows it to be changed.
This allows power/performance management software to set timer slack for
other threads according to its policy for the thread (such as when the
thread is designated foreground vs. background activity)
If the value written is non-zero, slack is set to that value. Otherwise
sets it to the default for the thread.
This interface checks that the calling task has permissions to to use
PTRACE_MODE_ATTACH_FSCREDS on the target task, so that we can ensure
arbitrary apps do not change the timer slack for other apps.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset introduces a /proc/<pid>/timerslack_ns interface which
would allow controlling processes to be able to set the timerslack value
on other processes in order to save power by avoiding wakeups (Something
Android currently does via out-of-tree patches).
The first patch tries to fix the internal timer_slack_ns usage which was
defined as a long, which limits the slack range to ~4 seconds on 32bit
systems. It converts it to a u64, which provides the same basically
unlimited slack (500 years) on both 32bit and 64bit machines.
The second patch introduces the /proc/<pid>/timerslack_ns interface
which allows the full 64bit slack range for a task to be read or set on
both 32bit and 64bit machines.
With these two patches, on a 32bit machine, after setting the slack on
bash to 10 seconds:
$ time sleep 1
real 0m10.747s
user 0m0.001s
sys 0m0.005s
The first patch is a little ugly, since I had to chase the slack delta
arguments through a number of functions converting them to u64s. Let me
know if it makes sense to break that up more or not.
Other than that things are fairly straightforward.
This patch (of 2):
The timer_slack_ns value in the task struct is currently a unsigned
long. This means that on 32bit applications, the maximum slack is just
over 4 seconds. However, on 64bit machines, its much much larger (~500
years).
This disparity could make application development a little (as well as
the default_slack) to a u64. This means both 32bit and 64bit systems
have the same effective internal slack range.
Now the existing ABI via PR_GET_TIMERSLACK and PR_SET_TIMERSLACK specify
the interface as a unsigned long, so we preserve that limitation on
32bit systems, where SET_TIMERSLACK can only set the slack to a unsigned
long value, and GET_TIMERSLACK will return ULONG_MAX if the slack is
actually larger then what can be stored by an unsigned long.
This patch also modifies hrtimer functions which specified the slack
delta as a unsigned long.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory
statistics protocol, corresponding to 'Available' in /proc/meminfo.
It indicates to the hypervisor how big the balloon can be inflated
without pushing the guest system to swap. This metric would be very
useful in VM orchestration software to improve memory management of
different VMs under overcommit.
This patch (of 2):
Factor out calculation of the available memory counter into a separate
exportable function, in order to be able to use it in other parts of the
kernel.
In particular, it appears a relevant metric to report to the hypervisor
via virtio-balloon statistics interface (in a followup patch).
Signed-off-by: Igor Redko <redkoi@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently /proc/kpageflags returns just KPF_COMPOUND_TAIL for slab tail
pages, which is inconvenient when grasping how slab pages are
distributed (userspace always needs to check which kind of tail pages by
itself). This patch sets KPF_SLAB for such pages.
With this patch:
$ grep Slab /proc/meminfo ; tools/vm/page-types -b slab
Slab: 64880 kB
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000080 16220 63 _______S__________________________________ slab
total 16220 63
16220 pages equals to 64880 kB, so returned result is consistent with the
global counter.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently /proc/kpageflags returns nothing for "tail" buddy pages, which
is inconvenient when grasping how free pages are distributed. This
patch sets KPF_BUDDY for such pages.
With this patch:
$ grep MemFree /proc/meminfo ; tools/vm/page-types -b buddy
MemFree: 3134992 kB
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000400 779272 3044 __________B_______________________________ buddy
0x0000000000000c00 4385 17 __________BM______________________________ buddy,mmap
total 783657 3061
783657 pages is 3134628 kB (roughly consistent with the global counter,)
so it's OK.
[akpm@linux-foundation.org: update comment, per Naoya]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big char/misc driver update for 4.6-rc1.
The majority of the patches here is hwtracing and some new mic drivers,
but there's a lot of other driver updates as well. Full details in the
shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbp9IcACgkQMUfUDdst+ykyJgCeLTC2QNGrh51kiJglkVJ0yD36
q4MAn0NkvSX2+iv5Jq8MaX6UQoRa4Nun
=MNjR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big char/misc driver update for 4.6-rc1.
The majority of the patches here is hwtracing and some new mic
drivers, but there's a lot of other driver updates as well. Full
details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits)
goldfish: Fix build error of missing ioremap on UM
nvmem: mediatek: Fix later provider initialization
nvmem: imx-ocotp: Fix return value of imx_ocotp_read
nvmem: Fix dependencies for !HAS_IOMEM archs
char: genrtc: replace blacklist with whitelist
drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
drivers: char: mem: fix IS_ERROR_VALUE usage
char: xillybus: Fix internal data structure initialization
pch_phub: return -ENODATA if ROM can't be mapped
Drivers: hv: vmbus: Support kexec on ws2012 r2 and above
Drivers: hv: vmbus: Support handling messages on multiple CPUs
Drivers: hv: utils: Remove util transport handler from list if registration fails
Drivers: hv: util: Pass the channel information during the init call
Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload()
Drivers: hv: vmbus: remove code duplication in message handling
Drivers: hv: vmbus: avoid wait_for_completion() on crash
Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages
misc: at24: replace memory_accessor with nvmem_device_read
eeprom: 93xx46: extend driver to plug into the NVMEM framework
eeprom: at25: extend driver to plug into the NVMEM framework
...
Just a few patches this time around for the 4.6-rc1 merge window.
Largest is a new firmware driver, but there are some other updates to
the driver core in here as well, the shortlog has the details.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbp9QoACgkQMUfUDdst+ynsOQCghpfAf3CJDr4PWGCKzDJzyQG9
rZYAn2VwKsqHzAxgLXZY5fQIjxSyaLek
=Mcvl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Just a few patches this time around for the 4.6-rc1 merge window.
Largest is a new firmware driver, but there are some other updates to
the driver core in here as well, the shortlog has the details.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver-core: platform: probe of-devices only using list of compatibles"
firmware: qemu config needs I/O ports
firmware: qemu_fw_cfg.c: fix typo FW_CFG_DATA_OFF
driver-core: platform: probe of-devices only using list of compatibles
driver-core: platform: fix typo in documentation for multi-driver helper
component: remove impossible condition
drivers: dma-coherent: simplify dma_init_coherent_memory return value
devicetree: update documentation for fw_cfg ARM bindings
firmware: create directory hierarchy for sysfs fw_cfg entries
firmware: introduce sysfs driver for QEMU's fw_cfg device
kobject: export kset_find_obj() for module use
driver core: bus: use to_subsys_private and to_device_private_bus
driver core: bus: use list_for_each_entry*
debugfs: Add stub function for debugfs_create_automount().
kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[]
nfsd4_cltrack_grace_start() will allocate the memory for grace_start but
when we returned due to error we missed freeing it.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull security layer updates from James Morris:
"There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
fixes scattered across the subsystem.
IMA now requires signed policy, and that policy is also now measured
and appraised"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
X.509: Make algo identifiers text instead of enum
akcipher: Move the RSA DER encoding check to the crypto layer
crypto: Add hash param to pkcs1pad
sign-file: fix build with CMS support disabled
MAINTAINERS: update tpmdd urls
MODSIGN: linux/string.h should be #included to get memcpy()
certs: Fix misaligned data in extra certificate list
X.509: Handle midnight alternative notation in GeneralizedTime
X.509: Support leap seconds
Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
X.509: Fix leap year handling again
PKCS#7: fix unitialized boolean 'want'
firmware: change kernel read fail to dev_dbg()
KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
KEYS: Reserve an extra certificate symbol for inserting without recompiling
modsign: hide openssl output in silent builds
tpm_tis: fix build warning with tpm_tis_resume
ima: require signed IMA policy
ima: measure and appraise the IMA policy itself
ima: load policy using path
...
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:
API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.
Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.
Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...
eCryptfs: Fix null pointer dereference on kzalloc error path
The conversion to skcipher and shash added a couple of null pointer
dereference bugs on the kzalloc failure path. This patch fixes them.
Fixes: 3095e8e366 ("eCryptfs: Use skcipher and shash")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aHja
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFSoRDMA Client Side Changes
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits)
xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
xprtrdma: Use an anonymous union in struct rpcrdma_mw
xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
xprtrdma: Serialize credit accounting again
xprtrdma: Properly handle RDMA_ERROR replies
rpcrdma: Add RPCRDMA_HDRLEN_ERR
xprtrdma: Do not wait if ib_post_send() fails
xprtrdma: Segment head and tail XDR buffers on page boundaries
xprtrdma: Clean up dprintk format string containing a newline
xprtrdma: Clean up physical_op_map()
xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
Just call inode_dio_wait directly instead of through a pointless wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The only difference to nfs_file_fsync is the call to pnfs_sync_inode. But
pnfs_sync_inode is just an inline that calls a pNFS layout driver method
if CONFIG_PNFS is designed, and thus can be called just fine from the core
NFS module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Merge first patch-bomb from Andrew Morton:
- some misc things
- ofs2 updates
- about half of MM
- checkpatch updates
- autofs4 update
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
autofs4: fix string.h include in auto_dev-ioctl.h
autofs4: use pr_xxx() macros directly for logging
autofs4: change log print macros to not insert newline
autofs4: make autofs log prints consistent
autofs4: fix some white space errors
autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked()
autofs4: fix coding style line length in autofs4_wait()
autofs4: fix coding style problem in autofs4_get_set_timeout()
autofs4: coding style fixes
autofs: show pipe inode in mount options
kallsyms: add support for relative offsets in kallsyms address table
kallsyms: don't overload absolute symbol type for percpu symbols
x86: kallsyms: disable absolute percpu symbols on !SMP
checkpatch: fix another left brace warning
checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses
checkpatch: warn on bare unsigned or signed declarations without int
checkpatch: exclude asm volatile from complex macro check
mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate()
mm: migrate: consolidate mem_cgroup_migrate() calls
mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous
...
Explicitly check show_devname method return code and bail out in case
of an error. This fixes regression introduced by commit 9d4d65748a.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also
unlocks if necessary (nfsd filehandle locking is probably too lenient),
so it gets unlocked eventually, but if the following op in the compound
needs to lock it again, we can deadlock.
A fuzzer ran into this; normal clients don't send a secinfo followed by
a readdir in the same compound.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a user calls writev/readv in direct io mode with partially valid data
in the iovec array such that any vector other than the first one in the
array contains invalid data, we currently return the error for the invalid
iovec.
Instead, we should return the number of bytes already written/read and not
the error as we do in the non direct_io case.
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the standard pr_xxx() log macros directly for log prints instead of
the AUTOFS_XXX() macros.
Signed-off-by: Ian Kent <ikent@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Common kernel coding practice is to include the newline of log prints
within the log text rather than hidden away in a macro.
To avoid introducing inconsistencies as changes are made change the log
macros to not include the newline.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the pr_*() print in AUTOFS_*() macros instead of printks and include
the module name in log message macros. Also use the AUTOFS_*() macros
everywhere instead of raw printks.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix some white space format errors.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return from an ioctl if an invalid ioctl is passed in should be
EINVAL not ENOSYS.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The need for this is questionable but checkpatch.pl complains about the
line length and it's a straightfoward change.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Refactor autofs4_get_set_timeout() to eliminate coding style error.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Try and make the coding style completely consistent throughtout the
autofs module and inline with kernel coding style recommendations.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is required for CRIU (Checkpoint Restart In Userspace) to migrate a
mount point when write end in user space is closed.
Below is a brief description of the problem.
To migrate a non-catatonic autofs mount point, one has to restore the
control pipe between kernel and autofs master process.
One of the autofs masters is systemd, which closes pipe write end after
passing it to the kernel with mount call.
To be able to restore the systemd control pipe one has to know which
read pipe end in systemd corresponds to the write pipe end in the
kernel. The pipe "fd" in mount options is not enough because it was
closed and probably replaced by some other descriptor.
Thus, some other attribute is required to be able to find the read pipe
end. The best attribute to use to find the correct pipe end is inode
number becuase it's unique for the whole system and can't be reused
while the autofs mount exists.
This attribute can also be used to recognize a situation where an autofs
mount has no master (no process with specified "pgrp" or no file
descriptor with "pipe_ino", specified in autofs mount options).
Signed-off-by: Stanislav Kinsburskiy <skinsbursky@virtuozzo.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that migration doesn't clear page->mem_cgroup of live pages anymore,
it's safe to make lock_page_memcg() and the memcg stat functions take
pages, and spare the callers from memcg objects.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These patches tag the page cache radix tree eviction entries with the
memcg an evicted page belonged to, thus making per-cgroup LRU reclaim
work properly and be as adaptive to new cache workingsets as global
reclaim already is.
This should have been part of the original thrash detection patch
series, but was deferred due to the complexity of those patches.
This patch (of 5):
So far the only sites that needed to exclude charge migration to
stabilize page->mem_cgroup have been per-cgroup page statistics, hence
the name mem_cgroup_begin_page_stat(). But per-cgroup thrash detection
will add another site that needs to ensure page->mem_cgroup lifetime.
Rename these locking functions to the more generic lock_page_memcg() and
unlock_page_memcg(). Since charge migration is a cgroup1 feature only,
we might be able to delete it at some point, and these now easy to
identify locking sites along with it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In dlm_send_join_cancels(), node is defined with type unsigned int, but
initialized with -1, this will lead variable overflow. Although this
won't cause any runtime problem, the code looks a little uncoordinated.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
when o2hb detect a node down, it first set the dead node to recovery map
and create ocfs2rec which will replay journal for dead node. o2hb
thread then call dlm_do_local_recovery_cleanup() to delete the lock for
dead node. After the lock of dead node is gone, locks for other nodes
can be granted and may modify the meta data without replaying journal of
the dead node. The detail is described as follows.
N1 N2 N3(master)
modify the extent tree of
inode, and commit
dirty metadata to journal,
then goes down.
o2hb thread detects
N1 goes down, set
recovery map and
delete the lock of N1.
dlm_thread flush ast
for the lock of N2.
do not detect the death
of N1, so recovery map is
empty.
read inode from disk
without replaying
the journal of N1 and
modify the extent tree
of the inode that N1
had modified.
ocfs2rec recover the
journal of N1.
The modification of N2
is lost.
The modification of N1 and N2 are not serial, and it will lead to
read-only file system. We can set recovery_waiting flag to the lock
resource after delete the lock for dead node to prevent other node from
getting the lock before dlm recovery. After dlm recovery, the recovery
map on N2 is not empty, ocfs2_inode_lock_full_nested() will wait for ocfs2
recovery.
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If master migrate this lock resource to node when it happened to purge
it, a new lock resource will be created and inserted into hash list. If
then master goes down, the lock resource being purged is recovered, so
there exist two lock resource with different owner. So return error to
master if the lock resource is in DROPPING state, master will retry to
migrate this lock resource.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the master goes down after return in-progress for deref message. The
lock resource on non-master node can not be purged. Clear the
DROPPING_REF flag and recovery it.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Master returns in-progress to non-master node when it can not clear the
refmap bit right now. And non-master node will not purge the lock
resource until receiving deref done message.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series of patches is to fix the dis-order issue of setting/clearing
refmap bit described below.
Node 1 Node 2(master)
dlmlock
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
dlmlock succeed
dlmunlock succeed
dlm_purge_lockres
dlm_deref_handler
-> find lock resource is in
DLM_LOCK_RES_SETREF_INPROG state,
so dispatch a deref work
dlm_purge_lockres succeed.
call dlmlock again
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
deref work trigger, call
dlm_lockres_clear_refmap_bit
to clear Node 1 from refmap
dlm_purge_lockres succeed
dlm_send_remote_lock_request
return DLM_IVLOCKID because
the lockres is not exist
BUG if the lockres is $RECOVERY
This series of patches add a new message to keep the order of set and
clear. Other nodes can purge the lock resource only after the refmap bit
on master is cleared.
This patch is to add DEREF_DONE message and corresponding handler. Node
can purge the lock resource after receiving this message. As a new
message is added, so increase the minor number of dlm protocol version.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Refer to cluster/tcp.h, NET_MAX_PAYLOAD_BYTES is a typo for
O2NET_MAX_PAYLOAD_BYTES.
Since currently DLM_MIG_LOCKRES_RESERVED is not actually used, it won't
cause any problem. But we'd better correct it for further use.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a75e9ccabd ("ocfs2: use spinlock irqsave for downconvert lock")
missed an unmodified place in ocfs2_osb_dump(), so it still exists a
deadlock scenario.
ocfs2_wake_downconvert_thread
ocfs2_rw_unlock
ocfs2_dio_end_io
dio_complete
.....
bio_endio
req_bio_endio
....
scsi_io_completion
blk_done_softirq
__do_softirq
do_softirq
irq_exit
do_IRQ
ocfs2_osb_dump
cat /sys/kernel/debug/ocfs2/${uuid}/fs_state
This patch still uses spin_lock_irqsave() - replace spin_lock() to solve
this situation.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There actually no hardware or software interrupts in the context which
using o2hb_live_lock, so we don't need to worry about race conditions
caused by irq/softirq with spinlock held. Turning off irq is not good
for system performance after all. Just replace them with a non
interrupt safe function.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 asm updates from Ingo Molnar:
"This is another big update. Main changes are:
- lots of x86 system call (and other traps/exceptions) entry code
enhancements. In particular the complex parts of the 64-bit entry
code have been migrated to C code as well, and a number of dusty
corners have been refreshed. (Andy Lutomirski)
- vDSO special mapping robustification and general cleanups (Andy
Lutomirski)
- cpufeature refactoring, cleanups and speedups (Borislav Petkov)
- lots of other changes ..."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/cpufeature: Enable new AVX-512 features
x86/entry/traps: Show unhandled signal for i386 in do_trap()
x86/entry: Call enter_from_user_mode() with IRQs off
x86/entry/32: Change INT80 to be an interrupt gate
x86/entry: Improve system call entry comments
x86/entry: Remove TIF_SINGLESTEP entry work
x86/entry/32: Add and check a stack canary for the SYSENTER stack
x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup
x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed
x86/entry: Vastly simplify SYSENTER TF (single-step) handling
x86/entry/traps: Clear DR6 early in do_debug() and improve the comment
x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions
x86/entry/32: Restore FLAGS on SYSEXIT
x86/entry/32: Filter NT and speed up AC filtering in SYSENTER
x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test
selftests/x86: In syscall_nt, test NT|TF as well
x86/asm-offsets: Remove PARAVIRT_enabled
x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled
uprobes: __create_xol_area() must nullify xol_mapping.fault
x86/cpufeature: Create a new synthetic cpu capability for machine check recovery
...
Now that we're not filtering out I_FREEING inodes from our lookups
anymore, we can eliminate the non_block parameter from the lookup
function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch basically reverts a very old patch from 2008,
7a9f53b3c1, with the title
"Alternate gfs2_iget to avoid looking up inodes being freed".
The original patch was designed to avoid a deadlock caused by lock
ordering with try_rgrp_unlink. The patch forced the function to not
find inodes that were being removed by VFS. The problem is, that
made it impossible for nodes to delete their own unlinked dinodes
after a certain point in time, because the inode needed was not found
by this filtering process. There is no longer a need for the patch,
since function try_rgrp_unlink no longer locks the inode: All it does
is queue the glock onto the delete work_queue, so there should be no
more deadlock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch tries to prevent delete work (queued via iopen callback)
from executing if the glock is currently being used to create
a new inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The fsx test in xfstests was failing because it was using direct IO
writes which were using a bad calculation. It was using
loff_t lstart = offset & (PAGE_CACHE_SIZE - 1); when it should be
loff_t lstart = offset & ~(PAGE_CACHE_SIZE - 1);
Thus, the write at offset 0x67e00 was calculating lstart to be
0xe00, the address of our corruption. Instead, it should have been
0x67000. This patch fixes the calculation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
We get a bogus warning about a potential uninitialized variable
use in gfs2, because the compiler does not figure out that we
never use the leaf number if get_leaf_nr() returns an error:
fs/gfs2/dir.c: In function 'get_first_leaf':
fs/gfs2/dir.c:802:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/gfs2/dir.c: In function 'dir_split_leaf':
fs/gfs2/dir.c:1021:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
Changing the 'if (!error)' to 'if (!IS_ERR_VALUE(error))' is
sufficient to let gcc understand that this is exactly the same
condition as in IS_ERR() so it can optimize the code path enough
to understand it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
xfs_dir2_node_trim_free can return with setting the rvalp argument
pointer. Initialize it to 0 at the beginning of the function and
only update it to 1 if we succeeded trimming a freespace block.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
__xfs_trans_roll() can return without setting the
*committed argument; this was a problem for xfs_bmap_finish():
int committed;/* xact committed or not */
...
error = __xfs_trans_roll(tp, ip, &committed);
if (error) {
...
if (committed) {
and we tested an uninitialized "committed" variable on the
error path. No caller is preserving "committed" state across
calls to __xfs_trans_roll(), so just initialize committed inside
the function to avoid future errors like this.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Bob Copeland
Linus Torvalds
Kirill A. Shutemov
Yauhen Kharuzhy
Mark Fasheh
Josef Bacik
David Sterba
Qu Wenruo
Liu Bo
Davide Italiano
Al Viro
Theodore Ts'o
Dan Carpenter
Jan Kara
Martin Brandenburg
Andreas Gruenbacher
Filipe Manana
Shuoran Liu
Jaegeuk Kim
Joe Perches
Andrew Price
Miklos Szeredi
Miklos Szeredi
Xue jiufei
jiangyiwen
Joseph Qi
Ryan Ding
Junxiao Bi
Geliang Tang
Yan, Zheng
Ilya Dryomov
Anton Protopopov
Deepa Dinamani
Chris Mason
Benjamin Coddington
Paolo Bonzini
Jann Horn
Maciej S. Szmigiero
Andy Lutomirski
Gang He
J. Bruce Fields
Jiri Kosina
Alex Lyakas
Kinglong Mee
Sohom Bhattacharjee
Vivek Goyal
David Howells
Konstantin Khlebnikov
Tejun Heo
Rabin Vincent
Christoph Hellwig
Arnd Bergmann
Chao Yu
Keith Mok
Fan Li
Kees Cook
Matthew Wilcox
Dave Young
Minfei Huang
Eric Engestrom
John Stultz
Joonsoo Kim
Igor Redko
Naoya Horiguchi
Sudip Mukherjee
Mike Marshall
Herbert Xu
Trond Myklebust
Jeff Layton
Dmitry V. Levin
Ashish Samant
Ian Kent
Ian Kent
Stanislav Kinsburskiy
Johannes Weiner
Andrew Morton
Jun Piao
Bob Peterson
Dave Chinner
Eric Sandeen