Граф коммитов

22 Коммитов

Автор SHA1 Сообщение Дата
Arnd Bergmann 4aa819c79b dmaengine: bcm2835: fix 64-bit warning
When building this driver on arm64, we get a harmless type
mismatch warning:

drivers/dma/bcm2835-dma.c: In function 'bcm2835_dma_fill_cb_chain_with_sg':
include/linux/kernel.h:743:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_min1 == &_min2);  \
                 ^
drivers/dma/bcm2835-dma.c:409:21: note: in expansion of macro 'min'
    cb->cb->length = min(len, max_len);

This changes the type of the 'len' variable to size_t, which
avoids the problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 388cc7a281 ("dmaengine: bcm2835: add slave_sg support to bcm2835-dma")
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-01 08:40:00 +05:30
Ben Dooks 636372281f dmaengine: bcm2835: fix unexported function
The bcm2835_dma_prep_dma_memcpy() function is not exported
outside the driver, so make it static to avoid the following
warning:

drivers/dma/bcm2835-dma.c:616:32: warning: symbol 'bcm2835_dma_prep_dma_memcpy' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-08 09:07:05 +05:30
Martin Sperl 0eef727a47 dmaengine: bcm2835: fix typo/added newline in legacy-mode warning message
Fix typo in warning message that there is no "interrupt-names"
property defined in the device-tree and legacy-mode is used.

Also added newline to end of message.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-02 15:08:19 +05:30
Martin Sperl e2eca6389b dmaengine: bcm2835: use platform_get_irq_byname
Use platform_get_irq_byname to allow for correct mapping of
interrupts to dma channels.

The currently implemented device tree is unfortunately
implemented with the wrong assumption, that each dma-channel
has its own dma channel, but dma-irq 11 is handling
dma-channel 11-14 and dma-irq 12 is actually a "catch all"
interrupt.

So here we use the byname variant and require that interrupts
are explicitly named via the interrupts-name property in the
device tree.

The use of shared interrupts is also implemented.

As a side-effect this means we can now use dma channels 12, 13 and 14
in a correct manner - also testing shows that onl using
channels 11 to 14 for spi and i2s works perfectly (when playing
some video)

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-19 21:02:48 +05:30
Martin Sperl d9f094a02f dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma
Also added check for an error condition in bcm2835_dma_create_cb_chain
that showed up during development of this patch.

Tested using dmatest for all enabled channels.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:22 +05:30
Martin Sperl 388cc7a281 dmaengine: bcm2835: add slave_sg support to bcm2835-dma
Add slave_sg support to bcm2835-dma using shared allocation
code for bcm2835_desc and DMA-control blocks already used by
dma_cyclic.

Note that bcm2835_dma_callback had to get modified to support
both modes of operation (cyclic and non-cyclic).

Tested using:
* Hifiberry I2S card (using cyclic DMA)
* fb_st7735r SPI-framebuffer (using slave_sg DMA via spi-bcm2835)
playing BigBuckBunny for audio and video.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:22 +05:30
Martin Sperl 4087412258 dmaengine: bcm2835: limit max length based on channel type
The bcm2835 dma system has 2 basic types of dma-channels:
* "normal" channels
* "light" channels

Lite channels are limited in several aspects:
* internal data-structure is 128 bit (not 256)
* does not support BCM2835_DMA_TDMODE (2D)
* DMA length register is limited to 16 bit.
  so 0-65535 (not 0-65536 as mentioned in the official datasheet)
* BCM2835_DMA_S/D_IGNORE are not supported

The detection of the type of mode is implemented by looking at
the LITE bit in the DEBUG register for each channel.
This allows automatic detection.

Based on this the maximum block size is set to (64K - 4) or to 1G
and this limit is honored during generation of control block
chains. The effect is that when a LITE channel is used more
control blocks are used to do the same transfer (compared
to a normal channel).

As there are several sources/target DREQS that are 32 bit wide
we need to have the transfer to be a multiple of 4 as this would
break the transfer otherwise.

This is why the limit of (64K - 4) was chosen over the
alternative of (64K - 4K).

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:22 +05:30
Martin Sperl 92153bb534 dmaengine: bcm2835: move controlblock chain generation into separate method
In preparation of adding slave_sg functionality this patch moves the
generation/allocation of bcm2835_desc and the building of
the corresponding DMA-control-block chain from bcm2835_dma_prep_dma_cyclic
into the newly created method bcm2835_dma_create_cb_chain.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:21 +05:30
Martin Sperl a4dcdd849e dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc
In preparation to consolidating code we move the cyclic member
into the bcm_2835_desc structure.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:21 +05:30
Martin Sperl e42685d7a7 dmaengine: bcm2835: add additional defines for DMA-registers
Add additional defines describing the DMA registers
as well as adding some more documentation to those registers.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:21 +05:30
Martin Sperl a1d71ba90c dmaengine: bcm2835: remove unnecessary masking of dma channels
The original patch contained 3 dma channels that were masked out.

These - as far as research and discussions show - are a
artefacts remaining from the downstream legacy dma-api.

Right now down-stream still includes a legacy api used only
in a single (downstream only) driver (bcm2708_fb) that requires
2D DMA for speedup (DMA-channel 0).
Formerly the sd-card support driver also was using this legacy
api (DMA-channel 2), but since has been moved over to use
dmaengine directly.

The DMA-channel 3 is already masked out in the devicetree in
the default property "brcm,dma-channel-mask = <0x7f35>;"

So we can remove the whole masking of DMA channels.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:21 +05:30
Martin Sperl 0fa5867e6a dmaengine: bcm2835: set residue_granularity field
bcm2835-dma supports residue reporting at burst level but didn't report
this via the residue_granularity field.

See also:
b015555327
for the downstream patch.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15 09:57:21 +05:30
Peter Ujfalusi 27bc944ca3 dmaengine: bcm2835-dma: Convert to use DMA pool
f931782917 dmaengine: bcm2835-dma: Fix memory leak when stopping a
	     running transfer

Fixed the memleak, but introduced another issue: the terminate_all callback
might be called with interrupts disabled and the dma_free_coherent() is
not allowed to be called when IRQs are disabled.
Convert the driver to use dma_pool_* for managing the list of control
blocks for the transfer.

Fixes: f931782917 ("dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-05 15:36:32 +05:30
Peter Ujfalusi f931782917 dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer
The vd->node is removed from the lists when the transfer started so the
vchan_get_all_descriptors() will not find it. This results memory leak.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30 23:17:08 +05:30
Maxime Ripard b574368024 dmaengine: bcm2835: Declare slave capabilities for the generic code
Now that the generic slave caps code can make use of the device assigned
capabilities, instead of relying on a callback to be implemented.

Make use of this code.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 12:33:23 +05:30
Maxime Ripard 39159bea78 dmaengine: bcm2835: Split device_control
Split the device_control callback of the Broadcom BCM2835 DMA driver to make
use of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 12:28:57 +05:30
Maxime Ripard ceacbdbf65 dmaengine: Make the destination abbreviation coherent
The dmaengine header abbreviates destination as at least two different strings.
Make a coherent use of a single one.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 12:28:55 +05:30
Kiran Padwal cd166280b7 dmaengine: Remove .owner field for driver
There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
[for nvidia]
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06 11:54:18 +05:30
Maxime Ripard 9eba5536a7 dmaengine: bcm2835: Remove chancnt affectations
chanctnt is already filled by dma_async_device_register, which uses the channel
list to know how much channels there is.

Since it's already filled, we can safely remove it from the drivers' probe
function.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06 11:32:44 +05:30
Laurent Pinchart 31c1e5a135 dmaengine: Remove the context argument to the prep_dma_cyclic operation
The argument is always set to NULL and never used. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:41:50 +05:30
Florian Meier 7f5ae35536 dmaengine: Add DMA_PRIVATE to BCM2835 driver
Without DMA_PRIVATE the driver is not able to allocate more than one channel.
Since it uses dma_get_any_slave_channel that calls private_candidate,
the second allocation fails at
/* some channels are already publicly allocated */
Maybe it should be fixed in the core, but at least this fixes the bug.

Signed-off-by: Florian Meier <florian.meier@koalo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20 12:31:50 +05:30
Florian Meier 96286b5766 dmaengine: Add support for BCM2835
Add support for DMA controller of BCM2835 as used in the Raspberry Pi.
Currently it only supports cyclic DMA.

Signed-off-by: Florian Meier <florian.meier@koalo.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-07 21:36:39 +05:30