Граф коммитов

163 Коммитов

Автор SHA1 Сообщение Дата
Jan Kara dc3b17cc8b block: Use pointer to backing_dev_info from request_queue
We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 08:20:48 -07:00
Bart Van Assche 5b8c01f74c dm table: simplify dm_table_determine_type()
Use a single loop instead of two loops to determine whether or not
all_blk_mq has to be set.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-08 14:13:03 -05:00
Bart Van Assche 301fc3f5ef dm table: an 'all_blk_mq' table must be loaded for a blk-mq DM device
When dm_table_set_type() is used by a target to establish a DM table's
type (e.g. DM_TYPE_MQ_REQUEST_BASED in the case of DM multipath) the
DM core must go on to verify that the devices in the table are
compatible with the established type.

Fixes: e83068a5 ("dm mpath: add optional "queue_mode" feature")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-08 14:12:53 -05:00
Mike Snitzer 6936c12cf8 dm table: fix 'all_blk_mq' inconsistency when an empty table is loaded
An earlier DM multipath table could have been build ontop of underlying
devices that were all using blk-mq.  In that case, if that active
multipath table is replaced with an empty DM multipath table (that
reflects all paths have failed) then it is important that the
'all_blk_mq' state of the active table is transfered to the new empty DM
table.  Otherwise dm-rq.c:dm_old_prep_tio() will incorrectly clone a
request that isn't needed by the DM multipath target when it is to issue
IO to an underlying blk-mq device.

Fixes: e83068a5 ("dm mpath: add optional "queue_mode" feature")
Cc: stable@vger.kernel.org # 4.8+
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-08 14:12:52 -05:00
tang.junhui dafa724bf5 dm table: fix missing dm_put_target_type() in dm_table_add_target()
dm_get_target_type() was previously called so any error returned from
dm_table_add_target() must first call dm_put_target_type().  Otherwise
the DM target module's reference count will leak and the associated
kernel module will be unable to be removed.

Also, leverage the fact that r is already -EINVAL and remove an extra
newline.

Fixes: 36a0456 ("dm table: add immutable feature")
Fixes: cc6cbe1 ("dm table: add always writeable feature")
Fixes: 3791e2f ("dm table: add singleton feature")
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-10-24 11:17:46 -04:00
Mike Snitzer f8df1fdf18 dm error: add DAX support
Allow the error target to replace an existing DAX-enabled target.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-20 23:49:50 -04:00
Toshi Kani 545ed20e6d dm: add infrastructure for DAX support
Change mapped device to implement direct_access function,
dm_blk_direct_access(), which calls a target direct_access function.
'struct target_type' is extended to have target direct_access interface.
This function limits direct accessible size to the dm_target's limit
with max_io_len().

Add dm_table_supports_dax() to iterate all targets and associated block
devices to check for DAX support.  To add DAX support to a DM target the
target must only implement the direct_access function.

Add a new dm type, DM_TYPE_DAX_BIO_BASED, which indicates that mapped
device supports DAX and is bio based.  This new type is used to assure
that all target devices have DAX support and remain that way after
QUEUE_FLAG_DAX is set in mapped device.

At initial table load, QUEUE_FLAG_DAX is set to mapped device when setting
DM_TYPE_DAX_BIO_BASED to the type.  Any subsequent table load to the
mapped device must have the same type, or else it fails per the check in
table_load().

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-20 23:49:49 -04:00
Mike Snitzer e83068a5fa dm mpath: add optional "queue_mode" feature
Allow a user to specify an optional feature 'queue_mode <mode>' where
<mode> may be "bio", "rq" or "mq" -- which corresponds to bio-based,
request_fn rq-based, and blk-mq rq-based respectively.

If the queue_mode feature isn't specified the default for the
"multipath" target is still "rq" but if dm_mod.use_blk_mq is set to Y
it'll default to mode "mq".

This new queue_mode feature introduces the ability for each multipath
device to have its own queue_mode (whereas before this feature all
multipath devices effectively had to have the same queue_mode).

This commit also goes a long way to eliminate the awkward (ab)use of
DM_TYPE_*, the associated filter_md_type() and other relatively fragile
and difficult to maintain code.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-10 15:16:02 -04:00
Mike Snitzer 4cc96131af dm: move request-based code out to dm-rq.[hc]
Add some seperation between bio-based and request-based DM core code.

'struct mapped_device' and other DM core only structures and functions
have been moved to dm-core.h and all relevant DM core .c files have been
updated to include dm-core.h rather than dm.h

DM targets should _never_ include dm-core.h!

[block core merge conflict resolution from Stephen Rothwell]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2016-06-10 15:15:44 -04:00
Jens Axboe c888a8f95a block: kill off q->flush_flags
Now that we converted everything to the newer block write cache
interface, kill off the queue flush_flags and queueable flush
entries.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-13 13:33:19 -06:00
Jens Axboe 519a7e16f9 dm: switch to using blk_queue_write_cache()
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12 16:00:39 -06:00
DingXiang 4df2bf466a dm snapshot: disallow the COW and origin devices from being identical
Otherwise loading a "snapshot" table using the same device for the
origin and COW devices, e.g.:

echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap

will trigger:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
[ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot]
[ 1958.989655] PGD 0
[ 1958.991903] Oops: 0000 [#1] SMP
...
[ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G          IO    4.5.0-rc5.snitm+ #150
...
[ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000
[ 1959.091865] RIP: 0010:[<ffffffffa040efba>]  [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot]
[ 1959.104295] RSP: 0018:ffff88032a957b30  EFLAGS: 00010246
[ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001
[ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00
[ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001
[ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80
[ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80
[ 1959.150021] FS:  00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000
[ 1959.159047] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0
[ 1959.173415] Stack:
[ 1959.175656]  ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc
[ 1959.183946]  ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000
[ 1959.192233]  ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf
[ 1959.200521] Call Trace:
[ 1959.203248]  [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot]
[ 1959.211986]  [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot]
[ 1959.219469]  [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod]
[ 1959.226656]  [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod]
[ 1959.234328]  [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod]
[ 1959.241129]  [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod]
[ 1959.248607]  [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod]
[ 1959.255307]  [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20
[ 1959.261816]  [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod]
[ 1959.268615]  [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0
[ 1959.274637]  [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100
[ 1959.281726]  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1959.288814]  [<ffffffff81216449>] SyS_ioctl+0x79/0x90
[ 1959.294450]  [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71
...
[ 1959.323277] RIP  [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot]
[ 1959.333090]  RSP <ffff88032a957b30>
[ 1959.336978] CR2: 0000000000000098
[ 1959.344121] ---[ end trace b049991ccad1169e ]---

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899
Cc: stable@vger.kernel.org
Signed-off-by: Ding Xiang <dingxiang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10 17:12:09 -05:00
Mike Snitzer 30187e1d48 dm: rename target's per_bio_data_size to per_io_data_size
Request-based DM will also make use of per_bio_data_size.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-02-22 22:34:37 -05:00
Mike Snitzer 16f122661d dm: optimize dm_mq_queue_rq()
DM multipath is the only dm-mq target.  But that aside, request-based DM
only supports tables with a single target that is immutable.  Leverage
this fact in dm_mq_queue_rq() by using the 'immutable_target' stored in
the mapped_device when the table was made active.  This saves the need
to even take the read-side of the SRCU via dm_{get,put}_live_table.

If the active DM table does not have an immutable target (e.g. "error"
target was swapped in) then fallback to the slow-path where the target
is looked up from the live table.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-02-22 11:06:22 -05:00
Mike Snitzer f083b09b78 dm: set DM_TARGET_WILDCARD feature on "error" target
The DM_TARGET_WILDCARD feature indicates that the "error" target may
replace any target; even immutable targets.  This feature will be useful
to preserve the ability to replace the "multipath" target even once it
is formally converted over to having the DM_TARGET_IMMUTABLE feature.

Also, implicit in the DM_TARGET_WILDCARD feature flag being set is that
.map, .map_rq, .clone_and_map_rq and .release_clone_rq are all defined
in the target_type.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-02-22 11:06:21 -05:00
Martin K. Petersen 25520d55cd block: Inline blk_integrity in struct gendisk
Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.

This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.

Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:

 - Moving the blk_integrity definition to genhd.h.

 - Inlining blk_integrity in struct gendisk.

 - Removing the dynamic allocation code.

 - Adding helper functions which allow gendisk to set up and tear down
   the integrity sysfs dir when a disk is added/deleted.

 - Adding a blk_integrity_revalidate() callback for updating the stable
   pages bdi setting.

 - The calls that depend on whether a device has an integrity profile or
   not now key off of the bi->profile pointer.

 - Simplifying the integrity support routines in DM (Mike Snitzer).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:42 -06:00
Keith Busch 03100aada9 block: Replace SG_GAPS with new queue limits mask
The SG_GAPS queue flag caused checks for bio vector alignment against
PAGE_SIZE, but the device may have different constraints. This patch
adds a queue limits so a driver with such constraints can set to allow
requests that would have been unnecessarily split. The new gaps check
takes the request_queue as a parameter to simplify the logic around
invoking this function.

This new limit makes the queue flag redundant, so removing it and
all usage. Device-mappers will inherit the correct settings through
blk_stack_limits().

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 14:26:02 -07:00
Kent Overstreet 8ae126660f block: kill merge_bvec_fn() completely
As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@kernel.org>
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
 dm-era-target, and resolve merge conflicts]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:31:57 -06:00
Mike Snitzer 78d8e58a08 Revert "block, dm: don't copy bios for request clones"
This reverts commit 5f1b670d0b.

Justification for revert as reported in this dm-devel post:
https://www.redhat.com/archives/dm-devel/2015-June/msg00160.html

this change should not be pushed to mainline yet.

Firstly, Christoph has a newer version of the patch that fixes silent
data corruption problem:
  https://www.redhat.com/archives/dm-devel/2015-May/msg00229.html

And the new version still depends on LLDDs to always complete requests
to the end when error happens, while block API doesn't enforce such a
requirement. If the assumption is ever broken, the inconsistency between
request and bio (e.g. rq->__sector and rq->bio) will cause silent data
corruption:
  https://www.redhat.com/archives/dm-devel/2015-June/msg00022.html

Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-26 10:11:58 -04:00
Mike Snitzer 4e6e36c371 Revert "dm: do not allocate any mempools for blk-mq request-based DM"
This reverts commit cbc4e3c135.

Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-26 10:11:07 -04:00
Mike Snitzer cbc4e3c135 dm: do not allocate any mempools for blk-mq request-based DM
Do not allocate the io_pool mempool for blk-mq request-based DM
(DM_TYPE_MQ_REQUEST_BASED) in dm_alloc_rq_mempools().

Also refine __bind_mempools() to have more precise awareness of which
mempools each type of DM device uses -- avoids mempool churn when
reloading DM tables (particularly for DM_TYPE_REQUEST_BASED).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-29 14:18:57 -04:00
Mike Snitzer 183f7802e7 Merge remote-tracking branch 'jens/for-4.2/core' into dm-4.2 2015-05-29 14:17:16 -04:00
Junichi Nomura 15b94a6904 dm: fix reload failure of 0 path multipath mapping on blk-mq devices
dm-multipath accepts 0 path mapping.

  # echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev

Such a mapping can be used to release underlying devices while still
holding requests in its queue until working paths come back.

However, once the multipath device is created over blk-mq devices,
it rejects reloading of 0 path mapping:

  # echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \
      | dmsetup create mpath1
  # echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1
  device-mapper: reload ioctl on mpath1 failed: Invalid argument
  Command failed

With following kernel message:
  device-mapper: ioctl: can't change device type after initial table load.

DM tries to inherit the current table type using dm_table_set_type()
but it doesn't work as expected because of unnecessary check about
whether the target type is hybrid or not.

Hybrid type is for targets that work as either request-based or bio-based
and not required for blk-mq or non blk-mq checking.

Fixes: 65803c2059 ("dm table: train hybrid target type detection to select blk-mq if appropriate")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-29 13:41:16 -04:00
Christoph Hellwig 5f1b670d0b block, dm: don't copy bios for request clones
Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.

This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence.  With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.

I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 08:58:57 -06:00
Joe Perches 7f61f5a022 dm table: use bool function return values of true/false not 1/0
Use the normal return values for bool functions.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:23 -04:00
Dan Ehrenberg 644bda6f34 dm table: fall back to getting device using name_to_dev_t()
If a device is used as the root filesystem, it can't be built
off of devices which are within the root filesystem (just like
command line arguments to root=).  For this reason, Linux has a
pseudo-filesystem for root= and MD initialization (based on the
function name_to_dev_t) which handles different ways of specifying
devices including PARTUUID and major:minor.

Switch to using name_to_dev_t() in dm_get_device().  Rather than
having DM assume that all things which are not major:minor are paths in
an already-mounted filesystem, change dm_get_device() to first attempt
to look up the device in the filesystem, and if not found it will fall
back to using name_to_dev_t().

In terms of backwards compatibility, there are some cases where
behavior will be different:
- If you have a file in the current working directory named 1:2 and
  you initialze DM there, then it will try to use that file rather
  than the disk with that major:minor pair as a backing device.
- Similarly for other bdev types which name_to_dev_t() knows how to
  interpret, the previous behavior was to repeatedly check for the
  existence of the file (e.g., while waiting for rootfs to come up)
  but the new behavior is to use the name_to_dev_t() interpretation.
  For example, if you have a file named /dev/ubiblock0_0 which is
  a symlink to /dev/sda3, but it is not yet present when DM starts
  to initialize, then the name_to_dev_t() interpretation will take
  precedence.

These incompatibilities would only show up in really strange setups
with bad practices so we shouldn't have to worry about them.

Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:19 -04:00
Mike Snitzer 17e149b8f7 dm: add 'use_blk_mq' module param and expose in per-device ro sysfs attr
Request-based DM's blk-mq support defaults to off; but a user can easily
change the default using the dm_mod.use_blk_mq module/boot option.

Also, you can check what mode a given request-based DM device is using
with: cat /sys/block/dm-X/dm/use_blk_mq

This change enabled further cleanup and reduced work (e.g. the
md->io_pool and md->rq_pool isn't created if using blk-mq).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:17 -04:00
Mike Snitzer bfebd1cdb4 dm: add full blk-mq support to request-based DM
Commit e5863d9ad ("dm: allocate requests in target when stacking on
blk-mq devices") served as the first step toward fully utilizing blk-mq
in request-based DM -- it enabled stacking an old-style (request_fn)
request_queue ontop of the underlying blk-mq device(s).  That first step
didn't improve performance of DM multipath ontop of fast blk-mq devices
(e.g. NVMe) because the top-level old-style request_queue was severely
limited by the queue_lock.

The second step offered here enables stacking a blk-mq request_queue
ontop of the underlying blk-mq device(s).  This unlocks significant
performance gains on fast blk-mq devices, Keith Busch tested on his NVMe
testbed and offered this really positive news:

 "Just providing a performance update. All my fio tests are getting
  roughly equal performance whether accessed through the raw block
  device or the multipath device mapper (~470k IOPS). I could only push
  ~20% of the raw iops through dm before this conversion, so this latest
  tree is looking really solid from a performance standpoint."

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Tested-by: Keith Busch <keith.busch@intel.com>
2015-04-15 12:10:16 -04:00
Mike Snitzer d56b9b28a4 dm: remove request-based DM queue's lld_busy_fn hook
DM multipath is the only caller of blk_lld_busy() -- which calls a
queue's lld_busy_fn hook.  Request-based DM doesn't support stacking
multipath devices so there is no reason to register the lld_busy_fn hook
on a multipath device's queue using blk_queue_lld_busy().

As such, remove functions dm_lld_busy and dm_table_any_busy_target.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-03-31 12:03:49 -04:00
Keith Busch a4afe76b2b dm: inherit QUEUE_FLAG_SG_GAPS flags from underlying queues
A DM device must inherit the QUEUE_FLAG_SG_GAPS flags from its
underlying block devices' request queues.

This fixes problems when submitting cloned requests to multipathed
devices requiring virtually contiguous buffers.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-11 10:25:46 -05:00
Mike Snitzer 65803c2059 dm table: train hybrid target type detection to select blk-mq if appropriate
Otherwise replacing the multipath target with the error target fails:
  device-mapper: ioctl: can't change device type after initial table load.

The error target was mistakenly considered to be target type
DM_TYPE_REQUEST_BASED rather than DM_TYPE_MQ_REQUEST_BASED even if the
target it was to replace was of type DM_TYPE_MQ_REQUEST_BASED.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-09 13:06:47 -05:00
Mike Snitzer e5863d9ad7 dm: allocate requests in target when stacking on blk-mq devices
For blk-mq request-based DM the responsibility of allocating a cloned
request is transfered from DM core to the target type.  Doing so
enables the cloned request to be allocated from the appropriate
blk-mq request_queue's pool (only the DM target, e.g. multipath, can
know which block device to send a given cloned request to).

Care was taken to preserve compatibility with old-style block request
completion that requires request-based DM _not_ acquire the clone
request's queue lock in the completion path.  As such, there are now 2
different request-based DM target_type interfaces:
1) the original .map_rq() interface will continue to be used for
   non-blk-mq devices -- the preallocated clone request is passed in
   from DM core.
2) a new .clone_and_map_rq() and .release_clone_rq() will be used for
   blk-mq devices -- blk_get_request() and blk_put_request() are used
   respectively from these hooks.

dm_table_set_type() was updated to detect if the request-based target is
being stacked on blk-mq devices, if so DM_TYPE_MQ_REQUEST_BASED is set.
DM core disallows switching the DM table's type after it is set.  This
means that there is no mixing of non-blk-mq and blk-mq devices within
the same request-based DM table.

[This patch was started by Keith and later heavily modified by Mike]

Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-09 13:06:47 -05:00
Mike Snitzer d67ee213fa dm: add presuspend_undo hook to target_type
The DM thin-pool target now must undo the changes performed during
pool_presuspend() so introduce presuspend_undo hook in target_type.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
2014-11-19 11:24:59 -05:00
Benjamin Marzinski 86f1152b11 dm: allow active and inactive tables to share dm_devs
Until this change, when loading a new DM table, DM core would re-open
all of the devices in the DM table.  Now, DM core will avoid redundant
device opens (and closes when destroying the old table) if the old
table already has a device open using the same mode.  This is achieved
by managing reference counts on the table_devices that DM core now
stores in the mapped_device structure (rather than in the dm_table
structure).  So a mapped_device's active and inactive dm_tables' dm_dev
lists now just point to the dm_devs stored in the mapped_device's
table_devices list.

This improvement in DM core's device reference counting has the
side-effect of fixing a long-standing limitation of the multipath
target: a DM multipath table couldn't include any paths that were unusable
(failed).  For example: if all paths have failed and you add a new,
working, path to the table; you can't use it since the table load would
fail due to it still containing failed paths.  Now a re-load of a
multipath table can include failed devices and when those devices become
active again they can be used instantly.

The device list code in dm.c isn't a straight copy/paste from the code in
dm-table.c, but it's very close (aside from some variable renames).  One
subtle difference is that find_table_device for the tables_devices list
will only match devices with the same name and mode.  This is because we
don't want to upgrade a device's mode in the active table when an
inactive table is loaded.

Access to the mapped_device structure's tables_devices list requires a
mutex (tables_devices_lock), so that tables cannot be created and
destroyed concurrently.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-10-05 20:03:35 -04:00
Jeff Moyer 200612ec33 dm table: propagate QUEUE_FLAG_NO_SG_MERGE
Commit 05f1dd5 ("block: add queue flag for disabling SG merging")
introduced a new queue flag: QUEUE_FLAG_NO_SG_MERGE.  This gets set by
default in blk_mq_init_queue for mq-enabled devices.  The effect of
the flag is to bypass the SG segment merging.  Instead, the
bio->bi_vcnt is used as the number of hardware segments.

With a device mapper target on top of a device with
QUEUE_FLAG_NO_SG_MERGE set, we can end up sending down more segments
than a driver is prepared to handle.  I ran into this when backporting
the virtio_blk mq support.  It triggerred this BUG_ON, in
virtio_queue_rq:

        BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems);

The queue's max is set here:
        blk_queue_max_segments(q, vblk->sg_elems-2);

Basically, what happens is that a bio is built up for the dm device
(which does not have the QUEUE_FLAG_NO_SG_MERGE flag set) using
bio_add_page.  That path will call into __blk_recalc_rq_segments, so
what you end up with is bi_phys_segments being much smaller than bi_vcnt
(and bi_vcnt grows beyond the maximum sg elements).  Then, when the bio
is submitted, it gets cloned.  When the cloned bio is submitted, it will
end up in blk_recount_segments, here:

        if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags))
                bio->bi_phys_segments = bio->bi_vcnt;

and now we've set bio->bi_phys_segments to a number that is beyond what
was registered as queue_max_segments by the driver.

The right way to fix this is to propagate the queue flag up the stack.

The rules for propagating the flag are simple:
- if the flag is set for any underlying device, it must be set for the
  upper device
- consequently, if the flag is not set for any underlying device, it
  should not be set for the upper device.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.16+
2014-08-10 20:54:49 -04:00
Mikulas Patocka a7ffb6a533 dm table: make dm_table_supports_discards static
The function dm_table_supports_discards is only called from
dm-table.c:dm_table_set_restrictions().  So move it above
dm_table_set_restrictions and make it static.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-01 12:30:34 -04:00
Mike Snitzer 11f0431be2 dm: remove symbol export for dm_set_device_limits
There is no need for code other than DM core to use dm_set_device_limits
so remove its EXPORT_SYMBOL_GPL.  Also, cleanup a couple whitespace nits.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-06-04 09:46:34 -04:00
Mike Snitzer 9974fa2c6a dm table: add dm_table_run_md_queue_async
Introduce dm_table_run_md_queue_async() to run the request_queue of the
mapped_device associated with a request-based DM table.

Also add dm_md_get_queue() wrapper to extract the request_queue from a
mapped_device.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
2014-03-27 16:56:24 -04:00
Mikulas Patocka 473c36dfee dm: make dm_table_alloc_md_mempools static
Make the function dm_table_alloc_md_mempools static because it is not
called from another file.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-03-27 16:56:23 -04:00
Mikulas Patocka 57a2f23856 dm table: remove unused buggy code that extends the targets array
A device mapper table is allocated in the following way:
* The function dm_table_create is called, it gets the number of targets
  as an argument -- it allocates a targets array accordingly.
* For each target, we call dm_table_add_target.

If we add more targets than were specified in dm_table_create, the
function dm_table_add_target reallocates the targets array.  However,
this reallocation code is wrong - it moves the targets array to a new
location, while some target constructors hold pointers to the array in
the old location.

The following DM target drivers save the pointer to the target
structure, so they corrupt memory if the target array is moved:
multipath, raid, mirror, snapshot, stripe, switch, thin, verity.

Under normal circumstances, the reallocation function is not called
(because dm_table_create is called with the correct number of targets),
so the buggy reallocation code is not used.

Prior to the fix "dm table: fail dm_table_create on dm_round_up
overflow", the reallocation code could only be used in case the user
specifies too large a value in param->target_count, such as 0xffffffff.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-01-07 10:11:44 -05:00
Mikulas Patocka 5b2d06576c dm table: fail dm_table_create on dm_round_up overflow
The dm_round_up function may overflow to zero.  In this case,
dm_table_create() must fail rather than go on to allocate an empty array
with alloc_targets().

This fixes a possible memory corruption that could be caused by passing
too large a number in "param->target_count".

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2013-12-10 16:34:27 -05:00
Mike Snitzer 7833b08e18 dm table: print error on preresume failure
If preresume fails it is worth logging an error given that a device is
left suspended due to the failure.

This change was motivated by local preresume error logging that was
added to the cache target ("preresume failed").  Elevating this
target-agnostic context for the where the target-specific error occurred
relative to the DM core's callouts makes sense.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
2013-11-09 18:20:21 -05:00
Mikulas Patocka f36afb3957 dm: allocate buffer for messages with small number of arguments using GFP_NOIO
dm-mpath and dm-thin must process messages even if some device is
suspended, so we allocate argv buffer with GFP_NOIO. These messages have
a small fixed number of arguments.

On the other hand, dm-switch needs to process bulk data using messages
so excessive use of GFP_NOIO could cause trouble.

The patch also lowers the default number of arguments from 64 to 8, so
that there is smaller load on GFP_NOIO allocations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-10-31 13:55:45 -04:00
Mike Snitzer 00c4fc3b1f dm ioctl: increase granularity of type_lock when loading table
Hold the mapped device's type_lock before calling populate_table() since
it is where the table's type is determined based on the specified
targets.  There is no need to allow concurrent table loads to race to
establish the table's targets or type.

This eliminates the need to grab the lock in dm_table_set_type().

Also verify that the type_lock is held in both dm_set_md_type() and
dm_get_md_type().

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00
Mike Snitzer 169e2cc279 dm: allow error target to replace bio-based and request-based targets
It may be useful to switch a request-based table to the "error" target.
Enhance the DM core to allow a hybrid target_type which is capable of
handling either bios (via .map) or requests (via .map_rq).

Add a request-based map function (.map_rq) to the "error" target_type;
making it DM's first hybrid target.  Train dm_table_set_type() to prefer
the mapped device's established type (request-based or bio-based).  If
the mapped device doesn't have an established type default to making the
table with the hybrid target(s) bio-based.

Tested 'dmsetup wipe_table' to work on both bio-based and request-based
devices.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:05 -04:00
Mikulas Patocka 83d5e5b0af dm: optimize use SRCU and RCU
This patch removes "io_lock" and "map_lock" in struct mapped_device and
"holders" in struct dm_table and replaces these mechanisms with
sleepable-rcu.

Previously, the code would call "dm_get_live_table" and "dm_table_put" to
get and release table. Now, the code is changed to call "dm_get_live_table"
and "dm_put_live_table". dm_get_live_table locks sleepable-rcu and
dm_put_live_table unlocks it.

dm_get_live_table_fast/dm_put_live_table_fast can be used instead of
dm_get_live_table/dm_put_live_table. These *_fast functions use
non-sleepable RCU, so the caller must not block between them.

If the code changes active or inactive dm table, it must call
dm_sync_table before destroying the old table.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-07-10 23:41:18 +01:00
Mike Snitzer dc019b21fb dm table: fix write same support
If device_not_write_same_capable() returns true then the iterate_devices
loop in dm_table_supports_write_same() should return false.

Reported-by: Bharata B Rao <bharata.rao@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.8+
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10 14:37:16 +01:00
Alasdair G Kergon 55a62eef8d dm: rename request variables to bios
Use 'bio' in the name of variables and functions that deal with
bios rather than 'request' to avoid confusion with the normal
block layer use of 'request'.

No functional changes.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
Wang Sheng-Hui d2ce70a119 dm table: remove superfluous variable reset
If allocation fails, the local var *t is not used any more after kfree.
Don't need to reset it to NULL. Remove the unnecesary NULL set here.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:45 +00:00
Mikulas Patocka c0820cf5ad dm: introduce per_bio_data
Introduce a field per_bio_data_size in struct dm_target.

Targets can set this field in the constructor. If a target sets this
field to a non-zero value, "per_bio_data_size" bytes of auxiliary data
are allocated for each bio submitted to the target. These data can be
used for any purpose by the target and help us improve performance by
removing some per-target mempools.

Per-bio data is accessed with dm_per_bio_data. The
argument data_size must be the same as the value per_bio_data_size in
dm_target.

If the target has a pointer to per_bio_data, it can get a pointer to
the bio with dm_bio_from_per_bio_data() function (data_size must be the
same as the value passed to dm_per_bio_data).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:38 +00:00