Lets fix this obvious coding style issues in the SCO module and bring it
in line with the rest of the Bluetooth subsystem.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no point in wrapping hci_sock_dev_event around hci_notify. It
is an empty wrapper which adds no value. So remove it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SKB context buffer for HCI request is really not just for requests,
information in their are preserved for the whole HCI layer. So it makes
more sense to actually rename it into bt_cb()->hci and also call it then
struct hci_ctrl.
In addition that allows moving the decoded opcode for outgoing packets
into that struct. So far it was just consuming valuable space from the
main shared items. And opcode are not valid for L2CAP packets.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are two checks that are still using (MSG_OOB) instead of just
MSG_OOB and so lets just fix them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With the addition of support for diagnostic feature, it makes sense to
increase the minor version of the Bluetooth core module.
The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are a few places that don't explicitly check the connection
state before calling hci_disconnect(). To make this API do the right
thing take advantage of the new hci_abort_conn() API and also make
sure to only read the clock offset if we're really connected.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Convert the various places mapping connection state to
disconnect/cancel HCI command to use the new hci_abort_conn helper
API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There are several different places needing to make sure that a
connection gets disconnected or canceled. The exact action needed
depends on the connection state, so centralizing this logic can save
quite a lot of code duplication.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For connection parameters that are left around until a disconnection
we should at least clear any auto-connection properties. This way a
new Add Device call is required to re-set them after calling Unpair
Device.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's only one user of this helper which can be replaces with a call
to hci_pend_le_action_lookup() and a check for params->explicit_connect.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's no need to clear the HCI_CONN_ENCRYPT_PEND flag in
smp_failure. In fact, this may cause the encryption tracking to get
out of sync as this has nothing to do with HCI activity.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The hci_le_create_connection_cancel() function needs to use the hdev
pointer in many places so add a variable for it to avoid the need to
dereference the hci_conn every time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Instead of doing all of the LE-specific handling in an else-branch in
unpair_device() create a 'done' label for the BR/EDR branch to jump to
and then remove the else-branch completely.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use the new hci_conn_hash_lookup_le() API to look up LE connections.
This way we're guaranteed exact matches that also take into account
the address type.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use the new hci_conn_hash_lookup_le() API to look up LE connections.
This way we're guaranteed exact matches that also take into account
the address type.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The mgmt code needs to convert from mgmt/L2CAP address types to HCI in
many places. Having a dedicated helper function for this simplifies
code by shortening it and removing unnecessary 'addr_type' variables.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The hci_conn objects don't have a dedicated lock themselves but rely
on the caller to hold the hci_dev lock for most types of access. The
hci_conn_timeout() function has so far sent certain HCI commands based
on the hci_conn state which has been possible without holding the
hci_dev lock.
The recent changes to do LE scanning before connect attempts added
even more operations to hci_conn and hci_dev from hci_conn_timeout,
thereby exposing potential race conditions with the hci_dev and
hci_conn states.
As an example of such a race, here there's a timeout but an
l2cap_sock_connect() call manages to race with the cleanup routine:
[Oct21 08:14] l2cap_chan_timeout: chan ee4b12c0 state BT_CONNECT
[ +0.000004] l2cap_chan_close: chan ee4b12c0 state BT_CONNECT
[ +0.000002] l2cap_chan_del: chan ee4b12c0, conn f3141580, err 111, state BT_CONNECT
[ +0.000002] l2cap_sock_teardown_cb: chan ee4b12c0 state BT_CONNECT
[ +0.000005] l2cap_chan_put: chan ee4b12c0 orig refcnt 4
[ +0.000010] hci_conn_drop: hcon f53d56e0 orig refcnt 1
[ +0.000013] l2cap_chan_put: chan ee4b12c0 orig refcnt 3
[ +0.000063] hci_conn_timeout: hcon f53d56e0 state BT_CONNECT
[ +0.000049] hci_conn_params_del: addr ee:0d:30:09:53:1f (type 1)
[ +0.000002] hci_chan_list_flush: hcon f53d56e0
[ +0.000001] hci_chan_del: hci0 hcon f53d56e0 chan f4e7ccc0
[ +0.004528] l2cap_sock_create: sock e708fc00
[ +0.000023] l2cap_chan_create: chan ee4b1770
[ +0.000001] l2cap_chan_hold: chan ee4b1770 orig refcnt 1
[ +0.000002] l2cap_sock_init: sk ee4b3390
[ +0.000029] l2cap_sock_bind: sk ee4b3390
[ +0.000010] l2cap_sock_setsockopt: sk ee4b3390
[ +0.000037] l2cap_sock_connect: sk ee4b3390
[ +0.000002] l2cap_chan_connect: 00:02:72:d9:e5:8b -> ee:0d:30:09:53:1f (type 2) psm 0x00
[ +0.000002] hci_get_route: 00:02:72:d9:e5:8b -> ee:0d:30:09:53:1f
[ +0.000001] hci_dev_hold: hci0 orig refcnt 8
[ +0.000003] hci_conn_hold: hcon f53d56e0 orig refcnt 0
Above the l2cap_chan_connect() shouldn't have been able to reach the
hci_conn f53d56e0 anymore but since hci_conn_timeout didn't do proper
locking that's not the case. The end result is a reference to hci_conn
that's not in the conn_hash list, resulting in list corruption when
trying to remove it later:
[Oct21 08:15] l2cap_chan_timeout: chan ee4b1770 state BT_CONNECT
[ +0.000004] l2cap_chan_close: chan ee4b1770 state BT_CONNECT
[ +0.000003] l2cap_chan_del: chan ee4b1770, conn f3141580, err 111, state BT_CONNECT
[ +0.000001] l2cap_sock_teardown_cb: chan ee4b1770 state BT_CONNECT
[ +0.000005] l2cap_chan_put: chan ee4b1770 orig refcnt 4
[ +0.000002] hci_conn_drop: hcon f53d56e0 orig refcnt 1
[ +0.000015] l2cap_chan_put: chan ee4b1770 orig refcnt 3
[ +0.000038] hci_conn_timeout: hcon f53d56e0 state BT_CONNECT
[ +0.000003] hci_chan_list_flush: hcon f53d56e0
[ +0.000002] hci_conn_hash_del: hci0 hcon f53d56e0
[ +0.000001] ------------[ cut here ]------------
[ +0.000461] WARNING: CPU: 0 PID: 1782 at lib/list_debug.c:56 __list_del_entry+0x3f/0x71()
[ +0.000839] list_del corruption, f53d56e0->prev is LIST_POISON2 (00000200)
The necessary fix is unfortunately more complicated than just adding
hci_dev_lock/unlock calls to the hci_conn_timeout() call path.
Particularly, the hci_conn_del() API, which expects the hci_dev lock to
be held, performs a cancel_delayed_work_sync(&hcon->disc_work) which
would lead to a deadlock if the hci_conn_timeout() call path tries to
acquire the same lock.
This patch solves the problem by deferring the cleanup work to a
separate work callback. To protect against the hci_dev or hci_conn
going away meanwhile temporary references are taken with the help of
hci_dev_hold() and hci_conn_get().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.3
Some drivers might have to restore certain settings after the init
procedure has been completed. This driver callback allows them to hook
into that stage. This callback is run just before the controller is
declared as powered up.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is a L2CAP protocol race between the local peer and
the remote peer demanding disconnection of the L2CAP link.
When L2CAP ERTM is used, l2cap_sock_shutdown() can be called
from userland to disconnect L2CAP. However, there can be a
delay introduced by waiting for ACKs. During this waiting
period, the remote peer may have sent a Disconnection Request.
Therefore, recheck the shutdown status of the socket
after waiting for ACKs because there is no need to do
further processing if the connection has gone.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit reorganizes the mutex lock and is now
only protecting l2cap_chan_close(). This is now consistent
with other places where l2cap_chan_close() is called.
If a conn connection exists, call
mutex_lock(&conn->chan_lock) before calling l2cap_chan_close()
to ensure other L2CAP protocol operations do not interfere.
Note that the conn structure has to be protected from being
freed as it is possible for the connection to be disconnected
whilst the locks are not held. This solution allows the mutex
lock to be used even when the connection has just been
disconnected.
This commit also reduces the scope of chan locking.
The only place where chan locking is needed is the call to
l2cap_chan_close(chan, 0) which if necessary closes the channel.
Therefore, move the l2cap_chan_lock(chan) and
l2cap_chan_lock(chan) locking calls to around
l2cap_chan_close(chan, 0).
This allows __l2cap_wait_ack(sk, chan) to be called with no
chan locks being held so L2CAP messaging over the ACL link
can be done unimpaired.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
l2cap_sock_shutdown() is designed to only action shutdown
of the channel when shutdown is not already in progress.
Therefore, reorganise the code flow by adding a goto
to jump to the end of function handling when shutdown is
already being actioned. This removes one level of code
indentation and make the code more readable.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch changes the lowpan_header_decompress function by removing
inklayer related information from parameters. This is currently for
supporting short and extended address for iphc handling in 802154.
We don't support short address handling anyway right now, but there
exists already code for handling short addresses in
lowpan_header_decompress.
The address parameters are also changed to a void pointer, so 6LoWPAN
linklayer specific code can put complex structures as these parameters
and cast it again inside the generic code by evaluating linklayer type
before. The order is also changed by destination address at first and
then source address, which is the same like all others functions where
destination is always the first, memcpy, dev_hard_header,
lowpan_header_compress, etc.
This patch also moves the fetching of iphc values from 6LoWPAN linklayer
specific code into the generic branch.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch changes the lowpan_header_compress function by removing
unused parameters like "len" and drop static value parameters of
protocol type. Instead we really check the protocol type inside inside
the skb structure. Also we drop the use of IEEE802154_ADDR_LEN which is
link-layer specific. Instead we using EUI64_ADDR_LEN which should always
the default case for now.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a check if the dataroom of skb contains a dispatch value
by checking if skb->len != 0. This patch also change the dispatch
evaluation by the recently introduced helpers for checking the common
6LoWPAN dispatch values for IPv6 and IPHC header.
There was also a forgotten else branch which should drop the packet if
no matching dispatch is available.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The commit 89cbb0638e introduced support for deferred connection
parameter removal when unpairing by removing them only once an
existing connection gets disconnected. However, it failed to address
the scenario when we're *not* connected and do an unpair operation.
What makes things worse is that most user space BlueZ versions will
first issue a disconnect request and only then unpair, meaning the
buggy code will be triggered every time. This effectively causes the
kernel to resume scanning and reconnect to a device for which we've
removed all keys and GATT database information.
This patch fixes the issue by adding the missing call to the
hci_conn_params_del() function to a branch which handles the case of
no existing connection.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 3.19+
Before the vendor specific setup stage is triggered call back into the
core to trigger an internal notification event. That event is used to
send an index update to the monitor interface. With that specific event
it is possible to update userspace with manufacturer information before
any HCI command has been executed. This is useful for early stage
debugging of vendor specific initialization sequences.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HIDP specs define an idle-timeout which automatically disconnects a
device. This has always been implemented in the HIDP layer and forced a
synchronous shutdown of the hidp-scheduler. This works just fine, but
lacks a forced disconnect on the underlying l2cap channels. This has been
broken since:
commit 5205185d46
Author: David Herrmann <dh.herrmann@gmail.com>
Date: Sat Apr 6 20:28:47 2013 +0200
Bluetooth: hidp: remove old session-management
The old session-management always forced an l2cap error on the ctrl/intr
channels when shutting down. The new session-management skips this, as we
don't want to enforce channel policy on the caller. In other words, if
user-space removes an HIDP device, the underlying channels (which are
*owned* and *referenced* by user-space) are still left active. User-space
needs to call shutdown(2) or close(2) to release them.
Unfortunately, this does not work with idle-timeouts. There is no way to
signal user-space that the HIDP layer has been stopped. The API simply
does not support any event-passing except for poll(2). Hence, we restore
old behavior and force EUNATCH on the sockets if the HIDP layer is
disconnected due to idle-timeouts (behavior of explicit disconnects
remains unmodified). User-space can still call
getsockopt(..., SO_ERROR, ...)
..to retrieve the EUNATCH error and clear sk_err. Hence, the channels can
still be re-used (which nobody does so far, though). Therefore, the API
still supports the new behavior, but with this patch it's also compatible
to the old implicit channel shutdown.
Cc: <stable@vger.kernel.org> # 3.10+
Reported-by: Mark Haun <haunma@keteu.org>
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If the diagnostic settings are not persistent over HCI Reset, then this
quirk can be used to tell the Bluetoth core about it. This will ensure
that the settings are programmed correctly when the controller is
powered up.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are LE devices on the market that start off by announcing their
public address and then once paired switch to using private address.
To be interoperable with such devices we should simply trust the fact
that we're receiving an IRK from them to indicate that they may use
private addresses in the future. Instead, simply tie the persistency
to the bonding/no-bonding information the same way as for LTKs and
CSRKs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Sending diagnostic messages directly to the monitor socket might cause
issues for devices processing their messages in interrupt context. So
instead of trying to directly forward them, queue them up with the other
HCI packets and lets them be processed by the sockets at the same time.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When using the HCI_CHANNEL_RAW, restrict the packet types to valid ones
from the Bluetooth specification.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HCI_VENDOR_PKT quirk was needed for BPA-100/105 devices that send
these messages. Now that there is support for proper diagnostic channel
this quirk is no longer needed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes sure that conn_params that were created just for
explicit_connect, will get properly deleted during cleanup.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
After clearing the params->explicit_connect variable the parameters
may need to be either added back to the right list or potentially left
absent from both the le_reports and the le_conns lists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Devices undergoing an explicit connect should not have their
conn_params struct removed by the mgmt Remove Device command. This
patch fixes the necessary checks in the command handler to correct the
behavior.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We can't use hci_explicit_connect_lookup() since that would only cover
explicit connections, leaving normal reconnections completely
untouched. Not using it in turn means leaving out entries in
pend_le_reports.
To fix this and simplify the logic move conn params from the reports
list to the pend_le_conns list for the duration of an explicit
connect. Once the connect is complete move the params back to the
pend_le_reports list. This also means that the explicit connect lookup
function only needs to look into the pend_le_conns list.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The code should never directly call hci_conn_hash_del since many
cleanup & reference counting updates would be lost. Normally
hci_conn_del is the right thing to do, but in the case of a connection
doing LE scanning this could cause a deadlock due to doing a
cancel_delayed_work_sync() on the same work callback that we were
called from.
Connections in the LE scanning state actually need very little cleanup
- just a small subset of hci_conn_del. To solve the issue, refactor
out these essential pieces into a new hci_conn_cleanup() function and
call that from the two necessary places.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When disable/enable scan command is issued twice, some controllers
will return an error for the second request, i.e. requests with this
command will fail on some controllers, and succeed on others.
This patch makes sure that unnecessary scan disable/enable commands
are not issued.
When adding device to the auto connect whitelist when there is pending
connect attempt, there is no need to update scan.
hci_connect_le_scan_cleanup is conditionally executing
hci_conn_params_del, that is calling hci_update_background_scan. Make
the other case also update scan, and remove reduntand call from
hci_connect_le_scan_remove.
When stopping interleaved discovery the state should be set to stopped
only when both LE scanning and discovery has stopped.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-10-08
Here's another set of Bluetooth & 802.15.4 patches for the 4.4 kernel.
802.15.4:
- Many improvements & fixes to the mrf24j40 driver
- Fixes and cleanups to nl802154, mac802154 & ieee802154 code
Bluetooth:
- New chipset support in btmrvl driver
- Fixes & cleanups to btbcm, btmrvl, bpa10x & btintel drivers
- Support for vendor specific diagnostic data through common API
- Cleanups to the 6lowpan code
- New events & message types for monitor channel
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the controller is unconfigured (for example it does not have a
valid Bluetooth address), then the basic debugfs entries for dut_mode
and vendor_diag are not creates. Ensure they are created in __hci_init
and also __hci_unconf_init functions. One of them is called during setup
stage of a new controller.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch moves values for all lowpan interface to the shared
implementation of 6lowpan. This patch also quietly fixes the forgotten
IFF_NO_QUEUE flag for the bluetooth 6LoWPAN interface. An identically
commit is 4afbc0d ("net: 6lowpan: convert to using IFF_NO_QUEUE") which
wasn't changed for bluetooth 6lowpan.
All 6lowpan interfaces should be virtual with IFF_NO_QUEUE, using EUI64
address length, the mtu size is 1280 (IPV6_MIN_MTU) and the netdev type
is ARPHRD_6LOWPAN.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The chan_get() function just adds unnecessary indirection to calling
the chan_create() call. The only added value it gives is the chan->ops
assignment, but that can equally well be done in the calling code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The typical convention when having both a child and a parent channel
variable is to call the former 'chan' and the latter 'pchan'. When
there's only one variable it's called chan. Rename the 'pchan'
variables in the 6lowpan code to follow this convention.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
All the chan_open() function now does is to call chan_create() so it
doesn't really add any value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The L2CAP core code makes sure of setting the channel state to
BT_CONNECTED, so there's no need for the implementation code (6lowpan
in this case) to do it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The L2CAP core code already sets the local MPS to a sane value. The
remote MPS value otoh comes from the remote side so there's no point
in trying to hard-code it to any value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The omtu value is determined by the remote peer so there's no point in
trying to hard-code it to any value. The IPSP specification otoh gives
a more reasonable value for the imtu, i.e. 1280.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When calling the hci_recv_frame driver function check for valid packet
types that the core should process. This should catch issues with
drivers trying to feed vendor packet types through this interface.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the controller requires the HCI Reset command to be send when
closing the transport, the HCI_AUTO_OFF needs to be accounted for. The
current code tries to actually do that, but the flag gets cleared to
early. So store its value and use it that stored value instead of
checking for a flag that is always cleared.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a new debugfs entry for enabling and disabling the vendor
diagnostic mode. It is only exposed for drivers that provide the
set_diag driver callback and actually have an option for vendor
specific diagnostic information.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce hci_recv_diag function for HCI drivers to allow sending vendor
specific diagnostic messages into the Bluetooth core stack. The messages
are not processed, but they are forwarded to the monitor channel and can
be retrieved by user space diagnostic tools.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Bluetooth public device address might change during controller setup
and it makes it a lot simpler for monitoring tools if they just get told
what the new address is. In addition include the manufacturer / company
information of the controller. That allows for easy vendor specific HCI
command and event handling.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the core starts or shuts down the actual HCI transport, send a new
monitor event that indicates that this is happening. These new events
correspond to HCI_DEV_OPEN and HCI_DEV_CLOSE events.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Setting and clearing of HCI_RUNNING flag in each and every driver is
just duplicating the same code all over the place. So instead of having
the driver do it in their hdev->open and hdev->close callbacks, set it
globally in the core transport handling.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In all callbacks for hdev->send the status of HCI_RUNNING is checked. So
instead of repeating that code in every driver, move the check into the
hci_send_frame function before calling hdev->send.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When opening the HCI transport via hdev->open send HCI_DEV_OPEN event
and when closing the HCI transport via hdev->close send HCI_DEV_CLOSE.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The stack internal events that are exposed to userspace should be
limited to HCI_DEV_REG, HCI_DEV_UNREG, HCI_DEV_UP and HCI_DEV_DOWN.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Send a HCI command and wait for command complete event.
This function serializes the requests by grabbing the req_lock.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Conflicts:
net/ipv4/arp.c
The net/ipv4/arp.c conflict was one commit adding a new
local variable while another commit was deleting one.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds ratelimited version of the BT_ERR macro.
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
With 9380f9eacf the order of unsetting
the HCI_USER_CHANNEL flag of the HCI device was reverted to ensure
the device is first closed before making it available again.
Due to hci_dev_close checking for HCI_USER_CHANNEL being set on the
device it was never really closed and was kept opened. We're now
calling hci_dev_do_close directly to make sure the device is correctly
closed and we keep the correct order to unset the flag on our device
object.
Signed-off-by: Simon Fels <simon.fels@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Some counterfeit CSR controllers also have broken behavior with the
HCI_Read_Stored_Link_Key command:
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Read all: 0x01
> HCI Event: Command Complete (0x0e) plen 8
Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Unsupported Feature or Parameter Value (0x11)
Max num keys: 0
Num keys: 0
Extend the existing HCI_QUIRK_BROKEN_STORED_LINK_KEY to be also used
for this HCI command.
Reported-and-tested-by: Rhobison Alves Pereira <rhobison@hotmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There are several actions that smp_conn_security() might make that do
not require a valid SMP context (conn->smp pointer). One of these
actions is to encrypt the link with an existing LTK. If the SMP
context wasn't initialized properly we should still allow the
independent actions to be done, i.e. the check for the context should
only be done at the last possible moment.
Reported-by: Chuck Ebbert <cebbert.lkml@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.0+
This makes the function sco_conn_del have a return type of void now
due to this function always running successfully and thus never
needing to signal its caller when a non recoverable internal failure
occurs by returning a error code to its respective caller.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-08-16
Here's what's likely the last bluetooth-next pull request for 4.3:
- 6lowpan/802.15.4 refactoring, cleanups & fixes
- Document 6lowpan netdev usage in Documentation/networking/6lowpan.txt
- Support for UART based QCA Bluetooth controllers
- Power management support for Broeadcom Bluetooth controllers
- Change LE connection initiation to always use passive scanning first
- Support for new Silicon Wave USB ID
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/cavium/Kconfig
The cavium conflict was overlapping dependency
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduced the 6lowpan netdev private data struct. We name it
lowpan_priv and it's placed at the beginning of netdev private data. All
lowpan interfaces should allocate this room at first of netdev private
data. 6LoWPAN LL private data can be allocate by additional netdev private
data, e.g. dev->priv_size should be "sizeof(struct lowpan_priv) +
sizeof(LL_LOWPAN_PRIVATE_DATA)".
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The usually way to get the btle lowpan private data is to use the
introduced lowpan_dev inline function. This patch will cleanup by using
lowpan_dev consequently.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch enables new connection establishment procedure. Instead of just
sending HCI_OP_LE_CREATE_CONN to controller, "connect" will add device to
kernel whitelist and start scan. If advertisement is received, it'll be
compared against whitelist and then trigger connection if it matches.
That fixes mentioned reconnect issue for already paired devices. It also
make whole connection procedure more robust. We can try to connect to
multiple devices at same time now, even though controller allow only one.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch makes sure that when new procedure is in use, and we're stuck
in scan phase because no advertisement was received and timeout happened,
or app decided to close socket, scan whitelist gets properly cleaned up.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This path makes sure that after advertisement is received from device that
we try to connect to, it is properly handled in check_pending_le_conn and
trigger connect attempt.
It also modifies hci_le_connect to make sure that connect attempt will be
properly continued.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch adds hci_connect_le_scan with dependencies, new method that
will be used to connect to remote LE devices. Instead of just sending
connect request, it adds a device to whitelist. Later patches will make
use of this whitelist to send conenct request when advertisement is
received, and properly handle timeouts.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds hci_lookup_le_connect method, that will be used to check
wether outgoing le connection attempt is in progress.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We should be passing the pointer itself instead of the address of the
pointer.
This was a copy and paste bug when we replaced the calls to
hci_send_cmd(). Originally, the arguments were "len, cp" but we
overwrote them with "sizeof(cp), &cp" by mistake.
Fixes: b3d3914006 ('Bluetooth: Move amp assoc read/write completed callback to amp.c')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch fixes how MGMT_EV_NEW_LONG_TERM_KEY event is build. Right now
val vield is filled with only 1 byte, instead of whole value. This bug
was introduced in
commit 1fc62c526a ("Bluetooth: Fix exposing full value of shortened LTKs")
Before that patch, if you paired with device using bluetoothd using simple
pairing, and then restarted bluetoothd, you would be able to re-connect,
but device would fail to establish encryption and would terminate
connection. After this patch connecting after bluetoothd restart works
fine.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Conflicts:
arch/s390/net/bpf_jit_comp.c
drivers/net/ethernet/ti/netcp_ethss.c
net/bridge/br_multicast.c
net/ipv4/ip_fragment.c
All four conflicts were cases of simple overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fix a possible race after calling register_netdev. After
calling netdev_register it could be possible that netdev_ops callbacks
use the uninitialized private data of lowpan_dev. By moving the
initialization of this data before netdev_register we can be sure that
initialized private data is be used after netdev_register.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is no need to use the safe version of list_for_each here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
To avoid a2mp module hooks from hci_event.c and send
getinfo response operation only required by a2mp module,
we can move this callback to a2mp.c
Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Move A2MP Module under BT_HS config option and allow
the user have flexible option to choose the feature only
they need
a2mp_discover_amp() & a2mp_channel_create() are a2mp module
entry point for master and slave, and this is dynamic
invoked depends on the userspace or remote request, then
we defined their implementation depends on BT_HS config
Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Move IRK checking logic in preparation to new connect method. Also
make sure that MGMT_STATUS_INVALID_PARAMS is returned when non
identity address is passed to ADD_DEVICE. Right now MGMT_STATUS_FAILED
is returned, which might be misleading.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a timeout to prevent the do while loop running in an
infinite loop. This ensures that the channel will be
instructed to close within 10 seconds so prevents
l2cap_sock_shutdown() getting stuck forever.
Returns -ENOLINK when the timeout is reached. The channel
will be subequently closed and not all data will be ACK'ed.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use msecs_to_jiffies() instead of using HZ so that it
is easier to specify the time in milliseconds.
Also add a #define L2CAP_WAIT_ACK_POLL_PERIOD to specify the 200ms
polling period so that it is defined in a single place.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add helpful BT_DBG debug to l2cap_sock_shutdown()
and __l2cap_wait_ack() so that the code flow can
be analysed.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use chan->state instead of chan->conn because waiting
for ACK's is only possible in the BT_CONNECTED state.
Also avoids reference to the conn structure so makes
locking easier.
Only call __l2cap_wait_ack() when the needed condition
of chan->unacked_frames > 0 && chan->state == BT_CONNECTED
is true and convert the while loop to a do while loop.
__l2cap_wait_ack() change the function prototype to
pass in the chan variable as chan is already available
in the calling function l2cap_sock_shutdown(). Avoids
locking issues.
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
During execution of l2cap_sock_shutdown() which might
sleep, the sk and chan structures can be in an unlocked
condition which potentially allows the structures to be
freed by other running threads. Therefore, there is a
possibility of a malfunction or memory reuse after being
freed.
Keep the sk and chan structures alive during the
execution of l2cap_sock_shutdown() by using their
respective hold and put functions. This allows the structures
to be freeable at the end of l2cap_sock_shutdown().
Signed-off-by: Kautuk Consul <Kautuk_Consul@mentor.com>
Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The l2cap_conn->smp pointer may be NULL for various valid reasons where SMP has
failed to initialize properly. One such scenario is when crypto support is
missing, another when the adapter has been powered on through a legacy method.
The smp_conn_security() function should have the appropriate check for this
situation to avoid NULL pointer dereferences.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.0+
Commit 835a6a2f86 ("Bluetooth: Stop sabotaging list poisoning")
thought that the code was sabotaging the list poisoning when NULL'ing
out the list pointers and removed it.
But what was going on was that the bluetooth code was using NULL
pointers for the list as a way to mark it empty, and that commit just
broke it (and replaced the test with NULL with a "list_empty()" test on
a uninitialized list instead, breaking things even further).
So fix it all up to use the regular and real list_empty() handling
(which does not use NULL, but a pointer to itself), also making sure to
initialize the list properly (the previous NULL case was initialized
implicitly by the session being allocated with kzalloc())
This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong
An.
[ I would normally expect to get this through the bt tree, but I'm going
to release -rc1, so I'm just committing this directly - Linus ]
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Original-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Original-by: Marcel Holtmann <marcel@holtmann.org>:
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the user->list is deleted with list_del(), it doesn't initialize the
entry which can cause the issue with list_empty(). According to the
comment from the list.h, list_empty() returns false even if the list is
empty and put the entry in an undefined state.
/**
* list_del - deletes entry from list.
* @entry: the element to delete from the list.
* Note: list_empty() on entry does not return true after this, the entry is
* in an undefined state.
*/
Because of this behavior, list_empty() returns false even if list is empty
when the device is reconnected.
So, user->list needs to be re-initialized after list_del(). list.h already
have a macro list_del_init() which deletes the entry and initailze it again.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When new hidp session is created, list header in l2cap_user is
not initialized and this causes list_empty() to fail in
l2cap_register_user() even if l2cap_user list is empty.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Rework the logic of checking for a valid adv_instance for non-zero
cp->instance values. Without this change we may get (false positive)
warnings as follows:
>> net/bluetooth/mgmt.c:7294:29: warning: 'adv_instance' may be used
uninitialized in this function [-Wuninitialized]
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use zallog for adv_instance allocation instead of kmalloc + memset.
This also fixes the following coccinelle warning:
>> net/bluetooth/hci_core.c:2693:17-24: WARNING: kzalloc should be
used for adv_instance, instead of kmalloc/memset
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch increments the management interface revision due to
introduction of new multi-advertising feature and various bug fixes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the obsolete adv_instance is no longer being referenced
anywhere in the code it can be removed without breaking the build.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
During service discovery, advertising will be disabled. This patch
ensures that it is correctly being re-enabled, both for configuration
made via set advertising and add advertising, once the scanning
times out.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch ensures that instance advertising is correctly canceled
before starting a le scan.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Advertising instances programmed while powered off should be advertised
once the device is powered. This patch ensures that all combinations
of setting and/or adding advertising configuration while powered off
will be correctly activated on power on.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The remove_advertising() and remove_advertising_complete() functions
had instance identifiers hard coded. Notably, when passing in 0x00 as
an instance identifier to signal that all instances should be removed
then the mgmt API would return a hard coded 0x01 rather than returning
the expected value 0x00. This bug is being fixed by always referencing
the instance identifier from the management API call instead.
remove_advertising() is refactored to use the new dynamic advertising
instance list. The logic is being changed to make multi-instance
advertising actually work, notably the schedule_adv_instance() method is
being referenced to make sure that other instances will continue to
advertise even if one instance is being removed.
The code is made more readable by factoring advertising instance
management and initialization into the low-level
hci_remove_adv_instance() and hci_adv_instances_clear() functions.
The method now references the clear_adv_instance() helper method to
remove duplicate logic and code.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The add_advertising() and add_advertising_complete() functions reference
the now obsolete hdev->adv_instance struct. Both methods are being
refactored to access the dynamic advertising instance list instead.
This patch also introduces all logic necessary to actually deal with
multiple instance advertising. Notably the mgmt_adv_inst_expired() and
schedule_adv_inst() method are being referenced to schedule instances in
a round robin fashion.
This patch also introduces a "pending" flag into the adv_info struct.
This is necessary to identify and remove recently added advertising
instances when the HCI commands return with an error status code.
Otherwise new advertising instances could be leaked without properly
informing userspace about their existence.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The clear_adv_instance() function could not clean up multiple
advertising instances previously. It is being changed to provide both, a
means to clean up a single instance and cleaning up all instances at
once.
An additional instance parameter is being introduced to achieve this.
Passing in 0x00 to this parameter signifies that all instances should be
cleaned up. This semantics has been chosen similarly to the semantics of
the instance parameter in the remove_advertising() function.
When removing a single instance the method also ensures that another
instance will be scheduled if available. When the currently advertising
method is being removed, it will be canceled immediately.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The set_advertising() and set_advertising_complete() methods rely on
the now obsolete hci_dev->adv_instance structure. We replace this
reference by an equivalent access to the newly introduced dynamic
advertising instance list.
This patch introduces a helper function that schedules an advertising
instance correctly calculating advertising timing based on the timeout
and duration settings of the instance. Scheduling is factored into
its own function for readability and code sharing.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The create_instance_adv_data() function could not deal with
multiple advertising instances previously. This is being fixed by
retrieving advertising instances from the newly introduced dynamic
advertising instance list.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The create_instance_scan_rsp_data() function could not deal with
multiple advertising instances previously. This is being fixed by adding
an additional instance parameter.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Previously enable_advertising() would rely on
get_adv_instance_scan_rsp_len() which checked for a hard coded instance
identifier. This is being changed to check for the current advertising
instance's scan response length instead. The function is renamed
accordingly.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Switch if and else conditions to replace a negative statement by a
positive one which makes the condition more readable.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The get_adv_instance_flags() would not work with instance identifiers
other than 0x01. This is being fixed so that arbitrary instance
identifiers can be dealt with while still correctly dealing with the
special case of the 0x00 identifier.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Replaces the hard coded instance identifier in
get_current_adv_instance() with the actual current instance identifier
so that this method is prepared to work with more than one advertising
instance.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The read_adv_features() method had a single instance identifier hard
coded. Refer to the advertising instance list instead to return a
dynamically generated list of instance identifiers.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The ...for_instance function name is quite long and does not follow the
..._inst_... convention followed elsewhere in the code. This patch
renames the ...for_instance functions to their shorter ..._inst_...
version.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
update_scan_rsp_data() duplicates code from get_current_adv_instance().
This is being fixed by letting the former make use of the latter.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently the delayed work managing advertising duration and timeout is
part of the advertising instance structure. This is not correct as only
a single instance can be advertised at any given time. To implement
round robin advertising a single delayed work structure is needed.
To fix this the delayed work structure is being moved to the hci_dev
structure. The instance specific variable is renamed to "remaining_time"
to make it clear that this is the remaining lifetime of the instance and
not the current advertising timeout.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The current hci dev structure only supports a single advertising
instance. To support multi-instance advertising it is necessary to
introduce a linked list of advertising instances so that multiple
advertising instances can be dynamically added and/or removed.
In a first step, the existing adv_instance member of the hci_dev
struct is supplemented by a linked list of advertising instances.
This patch introduces the list and supporting list management
infrastructure. The list is not being used yet.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch removes the additional module_put() in disconnect_all_peers()
making a correct module refcount so that the module can be removed after
disabling 6lowpan through debugfs.
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch removes the kfree of the netdev priv in device_event() upon
NETDEV_UNREGISTER event. The freeing of memory is taken care of by the
netdev destructor.
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch moves the sysfs device used by the netdev from the device of
the first connected peer to the hci sysfs device. Using the sysfs device
of hci instead of the first connected device fixes this issue such that
the sysfs group of tx-0 and bt0 kobject are still present after the last
peer has been deleted and all sysfs entries can be removed.
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch renames the variable used to trigger scheduling of
delete_netdev. Changed to infinitiv in order to describe the action
to be done.
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch fixes an issue with the netdev not being unregistered when
the last peer is deleted. Removing the logical negation operator on the
boolean solves this issue. If the last peer is removed the condition
will be true, and the delete_netdev() is scheduled.
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The encryption key size is read only for BR/EDR (ACL_LINK) connections
so there's no need to check for it in the read_enc_key_size_complete()
callback.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When pairing over SMP over BR/EDR the generated LTK has by default the
same key size as the BR/EDR Link Key. Make sure we don't set our
Pairing Request/Response max value to anything higher than that.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since Bluetooth 3.0 there's a HCI command available for reading the
encryption key size of an BR/EDR connection. This information is
essential e.g. for generating an LTK using SMP over BR/EDR, so store
it as part of struct hci_conn.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Checking for SC-only mode requirements when we get an encrypt change
event shouldn't be limited to the BT_CONFIG state but done any time
encryption changes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a debugfs control to set a different minimum LE
encryption key size. This is useful for testing that implementation of
the encryption key size handling is behaving correctly (e.g. that we
get appropriate 'Encryption Key Size' error responses when necessary).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a debugfs control to set a different maximum LE
encryption key size. This is useful for testing that implementation of
the encryption key size handling is behaving correctly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
list_del() poisons pointers with special values, no need to overwrite them.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When we notify user space of a new LTK or distribute an LTK to the
remote peer the value passed should be the shortened version so that
it's easy to compare values in various traces. The core spec also sets
the requirements for the shortening/masking as:
"The masking shall be done after generation and before being
distributed, used or stored."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
SCO/eSCO link is supported by BR/EDR controller, it is
suitable to move them under BT_BREDR config option
Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The return value of l2cap_recv_acldata() and sco_recv_scodata()
are not used, then change it to return void
Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The encryption key size for LTKs is supposed to be applied only at the
moment of encryption. When generating a Link Key (using LE SC) from
the LTK the full non-shortened value should be used. This patch
modifies the code to always keep the full value around and only apply
the key size when passing the value to HCI.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
During the initial setup stage of a controller, the low-level transport
is actually active. This means that HCI_UP is true. To avoid toggling
the transport off and back on again for normal operation the kernel
holds a grace period with HCI_AUTO_OFF that will turn the low-level
transport off in case no user is present.
The idea of the grace period is important to avoid having to initialize
all of the controller twice. So legacy ioctl and the new management
interface knows how to clear this grace period and then start normal
operation.
For the user channel operation this grace period has not been taken into
account which results in the problem that HCI_UP and HCI_AUTO_OFF are
set and the kernel will return EBUSY. However from a system point of
view the controller is ready to be grabbed by either the ioctl, the
management interface or the user channel.
This patch brings the user channel to the same level as the other two
entries for operating a controller.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org
The hci close method needs to know if we are in user channel context.
Only add the index to mgmt once close is performed.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
addr can be NULL and it should not be dereferenced before NULL checking.
Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-05-28
Here's a set of patches intended for 4.2. The majority of the changes
are on the 802.15.4 side of things rather than Bluetooth related:
- All sorts of cleanups & fixes to ieee802154 and related drivers
- Rework of tx power support in ieee802154 and its drivers
- Support for setting ieee802154 tx power through nl802154
- New IDs for the btusb driver
- Various cleanups & smaller fixes to btusb
- New btrtl driver for Realtec devices
- Fix suspend/resume for Realtek devices
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A few comments had minor typos. These are being fixed.
Signed-off-by: Florian Grandel <fgrandel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst.
Also, rt6i_gateway is always set to the nexthop while the nexthop
could be a gateway or the rt6i_dst.addr.
After removing the rt6i_dst and rt6i_src dependency in the last patch,
we also need to stop the caller from depending on rt6i_gateway and
RTF_ANYCAST.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/cadence/macb.c
drivers/net/phy/phy.c
include/linux/skbuff.h
net/ipv4/tcp.c
net/switchdev/switchdev.c
Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.
phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.
tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.
macb.c involved the addition of two zyncq device entries.
skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.
Signed-off-by: David S. Miller <davem@davemloft.net>
To help debug legacy SMP crypto functions add debug logs of the
various values involved.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Kuba Pawlak
Marcel Holtmann
Johan Hedberg
Dean Jenkins
Alexander Aring
David Herrmann
David S. Miller
Jakub Pawlowski
Loic Poulain
Frederic Danis
Szymon Janc
Simon Fels
Nicholas Krause
Dan Carpenter
Christophe JAILLET
Arron Wang
Linus Torvalds
Tedd Ho-Jeong An
Florian Grandel
Glenn Ruben Bakke
Alexey Dobriyan
Jaganath Kanakkassery
Martin KaFai Lau