Граф коммитов

939 Коммитов

Автор SHA1 Сообщение Дата
Jason Wessel 38f8eefccf pmac_zilog,kdb: Fix console poll hook to return instead of loop
kdb <-> kgdb transitioning does not work properly with this UART
driver because the get character routine loops indefinitely as opposed
to returning NO_POLL_CHAR per the expectation of the KDB I/O driver
API.

The symptom is a kernel hang when trying to switch debug modes.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 12:20:20 -07:00
Huang Shijie 0059202101 serial: mxs-auart: fix the wrong RTS hardware flow control
Without checking if the auart supports the hardware flow control or not,
the old mxs_auart_set_mctrl() asserted the RTS pin blindly.

This will causes the auart receives wrong data in the following case:
   The far-end has already started the write operation, and wait for
the auart asserts the RTS pin. Then the auart starts the read operation,
but mxs_auart_set_mctrl() may be called before we set the RTSCTS in the
mxs_auart_settermios(). So the RTS pin is asserted in a wrong situation,
and we get the wrong data in the end.

This bug has been catched when I connect the mx23(DTE) to the mx53(DCE).

This patch also replaces the AUART_CTRL2_RTS with AUART_CTRL2_RTSEN.
We should use the real the hardware flow control, not the software-controled
hardware flow control.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 12:15:33 -07:00
Fengguang Wu 7d9739cd6b serial: ifx6x60: fix paging fault on spi_register_driver
[  117.240866] BUG: unable to handle kernel paging request at 815b627c
[  117.240866] IP: [<813fe94b>] spi_register_driver+0xb/0x50
...
[  117.240866] Call Trace:
[  117.240866]  [<817de977>] ifx_spi_init+0xbe/0xf0

The root cause is, spi_register_driver() is trying to write into the
passed *const* struct spi_driver.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10 13:19:31 -07:00
Alexander Shiyan b53cc0fade serial: Change Kconfig entry for CLPS711X-target
This trivial patch adds a short description for SERIAL_CLPS711X Kconfig
entry, removes excess dependence on the ARM-platform (this is done
globally for the platform), allows the driver to be compiled by default
and removes unnecessary description about GRUB and LILO, because these
bootloaders do not supported this platform.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10 13:19:31 -07:00
Guennadi Liakhovetski 4dc4c51675 serial: sh-sci: fix compilation breakage, when DMA is enabled
A recent commit:

commit d6fa5a4e7a
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
    serial: sh-sci: prepare for conversion to the shdma base library

is not sufficient to update the sh-sci driver to the new shdma driver
layout. This caused compilation breakage, when CONFIG_SERIAL_SH_SCI_DMA
is enabled. This patch trivially fixes the problem by updating the DMA
descriptor manipulation code.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01 13:48:54 +09:00
Linus Torvalds 3e9a97082f This patch series contains a major revamp of how we collect entropy
from interrupts for /dev/random and /dev/urandom.  The goal is to
 addresses weaknesses discussed in the paper "Mining your Ps and Qs:
 Detection of Widespread Weak Keys in Network Devices", by Nadia
 Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will
 be published in the Proceedings of the 21st Usenix Security Symposium,
 August 2012.  (See https://factorable.net for more information and an
 extended version of the paper.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQF/0DAAoJENNvdpvBGATwIowQAOep9QKtLrBvb2lwIRVmeiy8
 lRf7V/tYZnz4FePbR0W92JQfKYkCV8yyOO0bmeRzWL3v4m+lRwDTSyA1DDyQMoH+
 LOMzvDKSLJMSXTXdSOIr1WYACphViCR/9CrbMBCKSkYfZLJ1MdaEDxT3rcpTGD0T
 6iknUweiSkHHhkerU5yQL7FKzD5kYUe0hsF47w7QVlHRHJsW2fsZqkFoh+RpnhNw
 03u+djxNGBo9qV81vZ9D1b0vA9uRlEjoWOOEG2XE4M2iq6TUySueA72dQnCwunfi
 3kG/u1Swv2dgq6aRrP3H7zdwhYSourGxziu3jNhEKwKEohrxYY7xjNX3RVeTqP67
 AzlKsOTWpRLIDrzjSLlb8VxRQiZewu8Unex3e1G+eo20sbcIObHGrxNp7K00zZvd
 QZiMHhOwItwFTe4lBO+XbqH2JKbL9/uJmwh5EipMpQTraKO9E6N3CJiUHjzBLo2K
 iGDZxRMKf4gVJRwDxbbP6D70JPVu8ZJ09XVIpsXQ3Z1xNqaMF0QdCmP3ty56q1o0
 NvkSXxPKrijZs8Sk0rVDqnJ3ll8PuDnXMv5eDtL42VT818I5WxESn9djjwEanGv0
 TYxbFub/NRxmPEE5B2Js5FBpqsLf5f282OSMeS/5WLBbnHJR1OoPoAhGVpHvxntC
 bi5FC1OolqhvzVIdsqgt
 =u7KM
 -----END PGP SIGNATURE-----

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

Pull random subsystem patches from Ted Ts'o:
 "This patch series contains a major revamp of how we collect entropy
  from interrupts for /dev/random and /dev/urandom.

  The goal is to addresses weaknesses discussed in the paper "Mining
  your Ps and Qs: Detection of Widespread Weak Keys in Network Devices",
  by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J.  Alex Halderman,
  which will be published in the Proceedings of the 21st Usenix Security
  Symposium, August 2012.  (See https://factorable.net for more
  information and an extended version of the paper.)"

Fix up trivial conflicts due to nearby changes in
drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c}

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits)
  random: mix in architectural randomness in extract_buf()
  dmi: Feed DMI table to /dev/random driver
  random: Add comment to random_initialize()
  random: final removal of IRQF_SAMPLE_RANDOM
  um: remove IRQF_SAMPLE_RANDOM which is now a no-op
  sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op
  board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op
  isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out
  uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op
  drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op
  xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op
  n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op
  i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op
  input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op
  mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op
  ...
2012-07-31 19:07:42 -07:00
Linus Torvalds cea8f46c36 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "First ARM push of this merge window, post me coming back from holiday.
  This is what has been in linux-next for the last few weeks.  Not much
  to say which isn't described by the commit summaries."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  ARM: 7463/1: topology: Update cpu_power according to DT information
  ARM: 7462/1: topology: factorize the update of sibling masks
  ARM: 7461/1: topology: Add arch_scale_freq_power function
  ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit}
  ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling
  ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path
  ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace
  ARM: 7452/1: delay: allow timer-based delay implementation to be selected
  ARM: 7451/1: arch timer: implement read_current_timer and get_cycles
  ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
  ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions
  ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
  ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines
  ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation
  ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process
  ARM: 7444/1: kernel: add arch-timer C3STOP feature
  ARM: 7460/1: remove asm/locks.h
  ARM: 7439/1: head.S: simplify initial page table mapping
  ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE
  ARM: 7436/1: Do not map the vectors page as write-through on UP systems
  ...
2012-07-27 15:14:26 -07:00
Russell King 91b006def3 Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linus 2012-07-27 23:06:32 +01:00
Linus Torvalds c1e7179a38 TTY/Serial patches for 3.6-rc1
Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
 serial drivers.  They were cherry-picked from the tty-next branch of the
 tty git tree, as they are small and "obvious" fixes.  The larger
 changes, as mentioned before, will be saved for the 3.7-rc1 merge
 window.
 
 All of these changes have been in the linux-next releases for quite a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAlAS5OkACgkQMUfUDdst+ykYLgCfdCz1v64yvk21r8un9fa3JXYW
 dIIAoNcIeLHsUOcmMSp0JN2oZkBNZOb7
 =y7gx
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/Serial patches from Greg Kroah-Hartman:
 "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
  serial drivers.  They were cherry-picked from the tty-next branch of
  the tty git tree, as they are small and "obvious" fixes.  The larger
  changes, as mentioned before, will be saved for the 3.7-rc1 merge
  window.

  All of these changes have been in the linux-next releases for quite a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Fix parity setting issue
  pch_uart: Fix rx error interrupt setting issue
  pch_uart: Fix missing break for 16 byte fifo
  tty ldisc: Close/Reopen race prevention should check the proper flag
  pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
  vt: fix race in vt_waitactive()
  serial/of-serial: Add LPC3220 standard UART compatible string
  serial/8250: Add LPC3220 standard UART type
  serial_core: Update buffer overrun statistics.
  serial: samsung: Fixed wrong comparison for baudclk_rate
2012-07-27 12:52:03 -07:00
Tomoya MORINAGA 38bd2a1ac7 pch_uart: Fix parity setting issue
Parity Setting value is reverse.
E.G. In case of setting ODD parity, EVEN value is set.
This patch inverts "if" condition.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:14 -07:00
Tomoya MORINAGA 9539dfb7ac pch_uart: Fix rx error interrupt setting issue
Rx Error interrupt(E.G. parity error) is not enabled.
So, when parity error occurs, error interrupt is not occurred.
As a result, the received data is not dropped.

This patch adds enable/disable rx error interrupt code.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:14 -07:00
Alan Cox 9bc03743ff pch_uart: Fix missing break for 16 byte fifo
Otherwise we fall back to the wrong value.

Reported-by: <dcb314@hotmail.com>
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44091
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:12 -07:00
Shachar Shemesh aa3c8af863 tty ldisc: Close/Reopen race prevention should check the proper flag
Commit acfa747b introduced the TTY_HUPPING flag to distinguish
closed TTY from currently closing ones. The test in tty_set_ldisc
still remained pointing at the old flag. This causes pppd to
sometimes lapse into uninterruptible sleep when killed and
restarted.

Signed-off-by: Shachar Shemesh <shachar@liveu.tv>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:06 -07:00
Darren Hart 2588aba002 pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
pch_uart_interrupt() takes priv->port.lock which leads to two recursive
spinlock calls if low_latency==1 or CONFIG_PREEMPT_RT_FULL=y (one
otherwise):

pch_uart_interrupt
  spin_lock_irqsave(priv->port.lock, flags)
  case PCH_UART_IID_RDR_TO (data ready)
  handle_rx_to
    push_rx
      tty_port_tty_get
        spin_lock_irqsave(&port->lock, flags) <--- already hold this lock
        ...
      tty_flip_buffer_push
        ...
        flush_to_ldisc
          spin_lock_irqsave(&tty->buf.lock)
            spin_lock_irqsave(&tty->buf.lock)
            disc->ops->receive_buf(tty, char_buf)
              n_tty_receive_buf
                tty->ops->flush_chars()
                uart_flush_chars
                  uart_start
                    spin_lock_irqsave(&port->lock) <--- already hold this lock

Avoid this by using a dedicated lock to protect the eg20t_port structure
and IO access to its membase. This is more consistent with the 8250
driver.  Ensure priv->lock is always take prior to priv->port.lock when
taken at the same time.

V2: Remove inadvertent whitespace change.
V3: Account for oops_in_progress for the private lock in
    pch_console_write().

Note: Like the 8250 driver, if a printk is introduced anywhere inside
      the pch_console_write() critical section, the kernel will hang
      on a recursive spinlock on the private lock. The oops case is
      handled by using a trylock in the oops_in_progress case.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tomoya MORINAGA <tomoya.rohm@gmail.com>
CC: Feng Tang <feng.tang@intel.com>
CC: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Rabin Vincent a7b12929be vt: fix race in vt_waitactive()
pm_restore_console() is called from the suspend/resume path, and this
calls vt_move_to_console(), which calls vt_waitactive().

There's a race in this path which causes the process which requests the
suspend to sleep indefinitely waiting for an event which already
happened:

P1                                      P2
 vt_move_to_console()
  set_console()
    schedule_console_callback()
  vt_waitactive()
    check n == fg_console +1
                                       console_callback()
                                         switch_screen()
                                         vt_event_post() // no waiters

    vt_event_wait() // forever

Fix the race by ensuring we're registered for the event before we check
if it's already completed.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Roland Stigge ed85c60457 serial/of-serial: Add LPC3220 standard UART compatible string
This patch adds a "compatible" string for the new 8250 UART type PORT_LPC3220.
This is necessary for initializing LPC32xx UARTs via DT.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Roland Stigge 6b583fa318 serial/8250: Add LPC3220 standard UART type
LPC32xx has "Standard" UARTs that are actually 16550A compatible but have
bigger FIFOs. Since the already supported 16X50 line still doesn't match here,
we agreed on adding a new type.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Corbin 24a7d449b0 serial_core: Update buffer overrun statistics.
Currently, serial drivers don't report buffer overruns. When a buffer overrun
occurs, tty_insert_flip_char returns 0, and no attempt is made to insert that
same character again (i.e. it is lost). This patch reports buffer overruns via
the buf_overrun field in the port's icount structure.

Signed-off-by: Corbin Atkinson <corbin.atkinson@xxxxxx>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Kyoungil Kim 10e7d0980f serial: samsung: Fixed wrong comparison for baudclk_rate
port->baudclk_rate should be compared to the rate of port->baudclk,
because port->baudclk_rate was assigned as the rate of port->baudclk previously.
So to check that the current baudclk rate is same as previous rate,
the target of comparison sholud be the rate of port->baudclk.

Signed-off-by: Jun-Ho, Yoon <junho78.yoon@samsung.com>
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Linus Torvalds c511dc1fb6 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine update from Vinod Koul:
 "This time we have a new dmaengine driver from the tegra folks.  Also
  we have Guennadi's cleanup of sh drivers which incudes a library for
  sh drivers.  And the usual odd fixes in bunch of drivers and some nice
  cleanup of dw_dmac from Andy."

Fix up conflicts in drivers/mmc/host/sh_mmcif.c

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Cleanup logging messages
  mmc: sh_mmcif: switch to the new DMA channel allocation and configuration
  dma: sh: provide a migration path for slave drivers to stop using .private
  dma: sh: use an integer slave ID to improve API compatibility
  dmaengine: shdma: prepare to stop using struct dma_chan::private
  sh: remove unused DMA device pointer from SIU platform data
  ASoC: siu: don't use DMA device for channel filtering
  dmaengine: shdma: (cosmetic) simplify a static function
  dmaengine: at_hdmac: add a few const qualifiers
  dw_dmac: use 'u32' for LLI structure members, not dma_addr_t
  dw_dmac: mark dwc_dump_lli inline
  dma: mxs-dma: Export missing symbols from mxs-dma.c
  dma: shdma: convert to the shdma base library
  ASoC: fsi: prepare for conversion to the shdma base library
  usb: renesas_usbhs: prepare for conversion to the shdma base library
  ASoC: siu: prepare for conversion to the shdma base library
  serial: sh-sci: prepare for conversion to the shdma base library
  mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library
  mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion
  dma: shdma: prepare for conversion to the shdma base library
  ...
2012-07-24 17:12:54 -07:00
Linus Torvalds 62c4d9afa4 Features:
* Performance improvement to lower the amount of traps the hypervisor
    has to do 32-bit guests. Mainly for setting PTE entries and updating
    TLS descriptors.
  * MCE polling driver to collect hypervisor MCE buffer and present them to
    /dev/mcelog.
  * Physical CPU online/offline support. When an privileged guest is booted
    it is present with virtual CPUs, which might have an 1:1 to physical
    CPUs but usually don't. This provides mechanism to offline/online physical
    CPUs.
 Bug-fixes for:
  * Coverity found fixes in the console and ACPI processor driver.
  * PVonHVM kexec fixes along with some cleanups.
  * Pages that fall within E820 gaps and non-RAM regions (and had been
    released to hypervisor) would be populated back, but potentially in
    non-RAM regions.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQDWcvAAoJEFjIrFwIi8fJ6GAH/iFIkOC5wseD8qZ9nV4VI46t
 0GYvBFC4F91NvC7CNfoAySr84v+ZORIZzMcdyDF8H/tLO9MaOY/Mwn0S5ZSqmYMi
 rhskvK3InBaVkYtceOHugNGM7mB0c3STIm7OsjW6gbVzohmTN25rbQR+X5iWAtVA
 cTUtDyH3AU15mwuVT3U+VC4IulHpnNJz4pHoq3Sn61/UK1LYmhLXYd5fveA0D0B8
 lRZTAvNMsYDJDDmkWNrs8RczKkQ86DTSjfGawm0YG+Gf94GgD5yMHWbiHh2Gy93e
 u7sHK0RrKbP5BY/MV6vVJxkoV5NoWgCc0tcjBcYwdyvwzxDS75UhV6uoVHC3Ao8=
 =drt2
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen update from Konrad Rzeszutek Wilk:
 "Features:
   * Performance improvement to lower the amount of traps the hypervisor
     has to do 32-bit guests.  Mainly for setting PTE entries and
     updating TLS descriptors.
   * MCE polling driver to collect hypervisor MCE buffer and present
     them to /dev/mcelog.
   * Physical CPU online/offline support.  When an privileged guest is
     booted it is present with virtual CPUs, which might have an 1:1 to
     physical CPUs but usually don't.  This provides mechanism to
     offline/online physical CPUs.
  Bug-fixes for:
   * Coverity found fixes in the console and ACPI processor driver.
   * PVonHVM kexec fixes along with some cleanups.
   * Pages that fall within E820 gaps and non-RAM regions (and had been
     released to hypervisor) would be populated back, but potentially in
     non-RAM regions."

* tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: populate correct number of pages when across mem boundary (v2)
  xen PVonHVM: move shared_info to MMIO before kexec
  xen: simplify init_hvm_pv_info
  xen: remove cast from HYPERVISOR_shared_info assignment
  xen: enable platform-pci only in a Xen guest
  xen/pv-on-hvm kexec: shutdown watches from old kernel
  xen/x86: avoid updating TLS descriptors if they haven't changed
  xen/x86: add desc_equal() to compare GDT descriptors
  xen/mm: zero PTEs for non-present MFNs in the initial page table
  xen/mm: do direct hypercall in xen_set_pte() if batching is unavailable
  xen/hvc: Fix up checks when the info is allocated.
  xen/acpi: Fix potential memory leak.
  xen/mce: add .poll method for mcelog device driver
  xen/mce: schedule a workqueue to avoid sleep in atomic context
  xen/pcpu: Xen physical cpus online/offline sys interface
  xen/mce: Register native mce handler as vMCE bounce back point
  x86, MCE, AMD: Adjust initcall sequence for xen
  xen/mce: Add mcelog support for Xen platform
2012-07-24 13:14:03 -07:00
Linus Torvalds 3645f0cd96 arm-soc: sparse IRQ conversion
The I.MX platform is getting converted to use sparse IRQs. We are doing
 this for all platforms over time, because this is one of the
 requirements for building a multiplatform kernel, and generally a good
 idea.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2dgGCrR//JCVInAQJOJRAA4xWh3CUqpuJ13yk2tOBcGU9+orer93fP
 U3DAG6jJ75blQzfA9wBoWPjqFhJo76ZtLFA9comkGI4vH8nTNNbXr1ZNt2/PjOGS
 PqZIYJk/f5QqOzCd10V5bK4EVFR/mjvQ8sBP8qfaHII0GVPomfa8jnXnFnLFjreX
 hhucTCf4z2HBvIjfOiilPtJbFpdrQ9oquM4W4Go1lrMZMU8B+Z3ClqytoxYW2Bw3
 uQ0EzFlAwaXZ1CMcDn4eQJxNt8dO4SbGI7AHd3HmW3tFaaJC9dpey/7pIoW3gyz8
 2e3wrdHXCAYq3sUlwzIrROCcBfW502E+KUmDi8ePT7zgZmxAmrqRCTNEqwaaGYrS
 Q/mk+Kpnjvtl6w21ss1LxNHP18TNL/f8isYW9vUQG8yogWlVin6NhPvNQXDDBWoD
 lfAyeL5JSoVxVGxft8EhLI/inPKBnWe2heE+zrRGQzUhTuUSyspmwK6o3b7JYNTX
 16fY6OhW90CaZm6r1yKZsiE96Dd63oL4OVFELsgPQdsBNdWeKmOjs6fq46Bp0Hdf
 SAQ543yabPkDr4ZanaNqo0s3Vu2xVnvBS4FR0gbx6+LGuagkmBpSkYnlhgNJBbdK
 6D5GCRoX0ayzJvg29kKzek2h8NhGtDco4dr7K5Hl9NebeZ++CjZ7xTbFQN6olt+D
 8CcIdD2J0PY=
 =Y2Sm
 -----END PGP SIGNATURE-----

Merge tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc sparse IRQ conversion from Arnd Bergmann:
 "The I.MX platform is getting converted to use sparse IRQs.  We are
  doing this for all platforms over time, because this is one of the
  requirements for building a multiplatform kernel, and generally a good
  idea."

* tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: select USE_OF
  ARM: imx: Fix build error due to missing irqs.h include
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
2012-07-23 17:36:02 -07:00
Linus Torvalds 4f2d658b2f arm-soc: device tree description updates
This branch contains two kinds of updates: Some platforms in the process
 of getting converted to device tree based booting, and the platform
 specific patches necessary for that are included here. Other platforms
 are already converted, so we just need to update the actual device
 tree source files and the binding documents to add support for new board
 and new drivers.
 In the future we will probably separate those into two branches, and
 in the long run, the plan is to move the device tree source files out
 of the kernel repository, but that has to wait until we have completed
 a much larger portion of the binding documents.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2dbmCrR//JCVInAQJl0hAA3U3AnfBBXbKEJhUi47z6QU2kRPVfyjAj
 ct+FsZMWFihEHC5/YkB/bQ/i7Hf/AKBZRG6eAUfsyevuhQ0Li+wsRM4eU3FaF6kw
 HNqqB6GQWM+2rR8//Y6AAZymTLfe5nbuWFhRXiIggIlQne5jJ1kSidmSzG+OJEuN
 sAKXX7Ud5goVsby9Uwp4Gc0fpDsjFmIarhHfMDizFozNZIFzZIhKKdl1VOf+Kv+o
 PFRfCGB2KQrrDy0oB62y3iNUiK84LA0xWX4KkI9rD4OHWeiDQpbUITchf//Wa20X
 vgZdI8T16sxbmAHi1zerIl8y/CLgLyerp1L3KSMGTwirC+92vZg+jOGYGgNqu973
 NOl0IBQFpbAlNzmf52naNgcQ2OxxFQ3ogrlpvE2bItLL7J3vpmn1JwWMTtSrcs3Z
 xgbovAq2ivNOiKpzXexvMsWDCU3PxzXaP+2hEUhglJcdXkx5Iwiwi6un2FuF2qWT
 l5rSAWkg2kT/OkgYHLBI5JW7e7ugWhUAuCsrIH9eW7xstm4hIlN950vefs2FrZkP
 FeE7pn6s6mr98+j9isJKusETXIoEXDLX61vxA8PQP7GYN+/O/g2qB0qztBwarMBL
 wAdHCjavOYNwPkxYaGLjv9qKt3X575O/6aFa/NoKGhIECanjLl02Tqg02BdHecST
 8HENXCvwQns=
 =K3WL
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree description updates from Arnd Bergmann:
 "This branch contains two kinds of updates: Some platforms in the
  process of getting converted to device tree based booting, and the
  platform specific patches necessary for that are included here.

  Other platforms are already converted, so we just need to update the
  actual device tree source files and the binding documents to add
  support for new board and new drivers.

  In the future we will probably separate those into two branches, and
  in the long run, the plan is to move the device tree source files out
  of the kernel repository, but that has to wait until we have completed
  a much larger portion of the binding documents."

Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly
added clkdev registers next to a few removed unnecessary ones.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: LPC32xx: Add PWM to base dts file
  ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5
  ARM: EXYNOS: Add spi clock support for EXYNOS5
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4
  ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock
  ARM: ux500: Remove PMU platform registration when booting with DT
  ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure
  ARM: ux500: Ensure vendor specific properties have the vendor's identifier
  pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes
  ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled
  ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices
  ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree
  ARM: ux500: Apply ab8500-debug node do the db8500 DT structure
  ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices
  ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm
  ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl
  ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT
  ...
2012-07-23 16:17:43 -07:00
Konrad Rzeszutek Wilk 37a80bf560 xen/hvc: Fix up checks when the info is allocated.
Coverity would complain about this - even thought it looks OK.

CID 401957
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19 15:51:42 -04:00
Theodore Ts'o fc4b1863a5 uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op
With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a
no-op; interrupt randomness is now collected unconditionally in a very
low-overhead fashion; see commit 775f4b297b.  The IRQF_SAMPLE_RANDOM
flag was scheduled to be removed in 2009 on the
feature-removal-schedule, so this patch is preparation for the final
removal of this flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-07-19 10:39:42 -04:00
Guennadi Liakhovetski d6fa5a4e7a serial: sh-sci: prepare for conversion to the shdma base library
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13 09:13:08 +05:30
Benjamin Herrenschmidt 50fb31cfed tty/hvc_opal: Fix debug function name
udbg_init_debug_opal() should be udbg_init_debug_opal_raw() as
the caller in arch/powerpc/kernel/udbg.c expects

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-10 19:16:25 +10:00
Fabio Estevam 1ea6607d4c serial: mxs-auart: Allow device tree probing
Allow device tree probing.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: <linux-serial@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Subodh Nijsure <snijsure@grid-net.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Arnd Bergmann fdc0867884 Merge branch 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/irq
From Shawn Guo <shawn.guo@linaro.org>, this makes it possible to use
sparse irqs with mach-imx.

* 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-02 23:18:19 +02:00
Shawn Guo 1ee8f65b56 tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
As the part of the effort to enable SPARE_IRQ for imx platform,
the macro MXC_INTERNAL_IRQS will be removed.  The imx serial driver
has a references to it for a decision on flags of request_irq call
based on rtsirq is beyond MXC_INTERNAL_IRQS.  However the searching
on imx platform code tells that rtsirq will never be beyond
MXC_INTERNAL_IRQS.  That said, the check, consequently the reference
to MXC_INTERNAL_IRQS are not needed, so remove them.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-serial@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-07-01 21:59:07 +08:00
Alessandro Rubini cb70706c82 ARM: 7433/1: serial: use the new linux/sizes.h
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-28 17:14:36 +01:00
Linus Torvalds a1821f774d Serial driver fixes for 3.5-rc4
Here are 3 patches resolving a boot regression (the mop500 fix), a build
 warning fix, and a kernel-doc fix.  All tiny, but should go into the
 final 3.5 release.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk/iNosACgkQMUfUDdst+ykedgCeLhpFrq5dI19tbhEmCroFs4sx
 f+4An29dz2bGkjeViDNkmaBC7msPzLNc
 =EBge
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull serial driver fixes from Greg Kroah-Hartman:
 "Here are 3 patches resolving a boot regression (the mop500 fix), a
  build warning fix, and a kernel-doc fix.  All tiny, but should go into
  the final 3.5 release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial/amba-pl011: move custom pin control to driver
  serial: fix serial_txx9.c build warning/typo
  serial: fix kernel-doc warnings in 8250.c
2012-06-20 15:13:13 -07:00
Linus Torvalds 069915b946 Five bug-fixes:
- When booting as PVHVM we would try to use PV console - but would not validate
    the parameters causing us to crash during restore b/c we re-use the wrong event
    channel.
  - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge
    and tried to use it.
  - Under AMD machines would advertise the APERFMPERF resulting in needless amount
    of MSRs from the guest.
  - A global value (xen_released_pages) was not subtracted at bootup when pages
    were added back in. This resulted in the balloon worker having the wrong
    account of how many pages were truly released.
  - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJP2kcmAAoJEFjIrFwIi8fJXLcH/0a2m6KMcyjc4WaCHspAEFDL
 9B055QUFDEOlH55wE2QeED/8D+0HUbTYnQBycH126XLKzLfRv1fsrKFKDSA/SWW2
 Mh8N316UrY5Wc3KMdxXdCXJCDqDs7VhARTv6JdlUqUlH9oLRYE6CMRO8MujT0iwd
 r+uEnNuW0udMFt8x9SnJW7pEaq7u2N5koEGdWEzZhfoumDaCRxm5OKAKXZ0DZlEZ
 /BPjTW/N+Pf4u+bJZY+wQq41y4zGMqu7TDo/hOpuGZxeqtVnCE9trBbuGLnp4K+W
 n4TfZZs9Y1kovSMj6qTeB0aP0F77tqHyXPb1oPKxm2kWfqT2dFtIRpuLtXYSC+o=
 =cQl2
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull five Xen bug-fixes from Konrad Rzeszutek Wilk:

 - When booting as PVHVM we would try to use PV console - but would not validate
   the parameters causing us to crash during restore b/c we re-use the wrong event
   channel.
 - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge
   and tried to use it.
 - Under AMD machines would advertise the APERFMPERF resulting in needless amount
   of MSRs from the guest.
 - A global value (xen_released_pages) was not subtracted at bootup when pages
   were added back in. This resulted in the balloon worker having the wrong
   account of how many pages were truly released.
 - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback.

* tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: mark local pages as FOREIGN in the m2p_override
  xen/setup: filter APERFMPERF cpuid feature out
  xen/balloon: Subtract from xen_released_pages the count that is populated.
  xen/pci: Check for PCI bridge before using it.
  xen/events: Add WARN_ON when quick lookup found invalid type.
  xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.
  xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN
  xen/hvc: Collapse error logic.
2012-06-15 17:17:15 -07:00
Paul Mundt 380622e9ff Merge branches 'sh/urgent', 'sh/core', 'sh/clockevents', 'sh/asm-generic' and 'sh/trivial' into sh-fixes-for-linus 2012-06-13 12:01:33 +09:00
Laurent Pinchart b6c5ef6f6d serial: sh-sci: Make probe fail for ports that exceed the maximum count
The driver supports a maximum number of ports configurable at compile
time. Make sure the probe() method fails when registering a port that
exceeds the maximum instead of returning success without registering the
port.

This fixes a crash at system suspend time, when the driver tried to
suspend a non-registered port using the UART core.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-13 10:22:10 +09:00
Laurent Pinchart 6dae14216c serial: sh-sci: Fix probe error paths
When probing fails, the driver must not try to cleanup resources that
have not been initialized. Fix this.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-13 10:22:08 +09:00
Linus Walleij 78d80c5a72 serial/amba-pl011: move custom pin control to driver
We had a boot regression in Ux500 in the merge window because
two orthogonal pin control schemes for the PL011 were merged
at the same time:

- One using the .init() and .exit() hooks into the platform
  for Ux500 putting the pins into default vs sleep state
  respectively as the port was started/stopped.
  commit a09806607f
  "ARM: ux500: switch to using pinctrl for uart0"

- One hogging the default setting at PL011 probe()
  commit 258e055111
  "serial: amba-pl011: adopt pinctrl support"

To get a solution that works for both let's scrap the stuff
in the platform callbacks, instead have the driver itself
select default and sleep states when the port is
started/stopped. Hopefully this works for all clients.
Platform callbacks are bad for device tree migration anyway,
so this rids us of another problem in Ux500.

Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12 15:41:44 -07:00
Randy Dunlap f109293f58 serial: fix serial_txx9.c build warning/typo
Fix kconfig symbol test to use "defined":

drivers/tty/serial/serial_txx9.c: warning: "CONFIG_CONSOLE_POLL" is not defined [-Wundef]

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12 15:41:18 -07:00
Randy Dunlap 58bcd33229 serial: fix kernel-doc warnings in 8250.c
Fix kernel-doc warnings in drivers/tty/serial/8250/8250.c:

Warning(drivers/tty/serial/8250/8250.c:3128): No description found for parameter 'up'
Warning(drivers/tty/serial/8250/8250.c:3128): Excess function parameter 'port' description in 'serial8250_register_8250_port'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12 15:41:18 -07:00
Linus Torvalds f309532bf3 tty: Revert the tty locking series, it needs more work
This reverts the tty layer change to use per-tty locking, because it's
not correct yet, and fixing it will require some more deep surgery.

The main revert is d29f3ef39b ("tty_lock: Localise the lock"), but
there are several smaller commits that built upon it, they also get
reverted here. The list of reverted commits is:

  fde86d3108 - tty: add lockdep annotations
  8f6576ad47 - tty: fix ldisc lock inversion trace
  d3ca8b64b9 - pty: Fix lock inversion
  b1d679afd7 - tty: drop the pty lock during hangup
  abcefe5fc3 - tty/amiserial: Add missing argument for tty_unlock()
  fd11b42e35 - cris: fix missing tty arg in wait_event_interruptible_tty call
  d29f3ef39b - tty_lock: Localise the lock

The revert had a trivial conflict in the 68360serial.c staging driver
that got removed in the meantime.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-02 15:21:43 -07:00
Eric Dumazet fde86d3108 tty: add lockdep annotations
tty_lock_pair() do the right thing to avoid deadlocks, but should
instruct LOCKDEP of this to avoid a splat.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 11:59:41 -07:00
Linus Torvalds 7e5b2db77b Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...
2012-05-29 18:27:19 -07:00
Alan Cox 8f6576ad47 tty: fix ldisc lock inversion trace
This is caused by tty_release using tty_lock_pair to lock both sides of
the pty/tty pair, and then tty_ldisc_release dropping and relocking one
side only.  We can drop both fine, so drop both to avoid any lock
ordering concerns.

Rework the release path to fix the new locking model.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 10:42:13 -07:00
Alan Cox d3ca8b64b9 pty: Fix lock inversion
The ptmx_open path takes the tty and devpts locks in the wrong order
because tty_init_dev locks and returns a locked tty.  As far as I can
tell this is actually safe anyway because the tty being returned is new
so nobody can get a reference to lock it at this point.

However we don't even need the devpts lock at this point, it's only held
as a byproduct of the way the locks were pushe down.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 10:42:13 -07:00
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Ralf Baechle c819baf31f Merge branches 'fixes-for-linus', 'generic', 'cavium', 'module.h-fixes', 'next/ath79' and 'next/lantiq' into mips-for-linux-next 2012-05-26 19:55:48 +01:00
Konrad Rzeszutek Wilk 5842f57685 xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.
We need to make sure that those parameters are setup to be correct.
As such the value of 0 is deemed invalid and we find that we
bail out. The hypervisor sets by default all of them to be zero
and when the hypercall is done does a simple:

 a.value = d->arch.hvm_domain.params[a.index];

Which means that if the Xen toolstack forgot to setup the proper
HVM_PARAM_CONSOLE_EVTCHN (or the PFN one), we would get the
default value of 0 and use that.

CC: stable@kernel.org
Fixes-Oracle-Bug: 14091238
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-24 14:23:01 -04:00
Konrad Rzeszutek Wilk a32c88b938 xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN
We weren't resetting the parameter to be passed in to a
known default. Nor were we checking the return value of
hvm_get_parameter.

CC: stable@kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-24 14:15:35 -04:00
Konrad Rzeszutek Wilk 2e5ad6b9c4 xen/hvc: Collapse error logic.
All of the error paths are doing the same logic. In which
case we might as well collapse them in one path.

CC: stable@kernel.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-24 14:15:29 -04:00
Linus Torvalds d5b4bb4d10 Merge branch 'delete-mca' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull the MCA deletion branch from Paul Gortmaker:
 "It was good that we could support MCA machines back in the day, but
  realistically, nobody is using them anymore.  They were mostly limited
  to 386-sx 16MHz CPU and some 486 class machines and never more than
  64MB of RAM.  Even the enthusiast hobbyist community seems to have
  dried up close to ten years ago, based on what you can find searching
  various websites dedicated to the relatively short lived hardware.

  So lets remove the support relating to CONFIG_MCA.  There is no point
  carrying this forward, wasting cycles doing routine maintenance on it;
  wasting allyesconfig build time on validating it, wasting I/O on git
  grep'ping over it, and so on."

Let's see if anybody screams.  It generally has compiled, and James
Bottomley pointed out that there was a MCA extension from NCR that
allowed for up to 4GB of memory and PPro-class machines.  So in *theory*
there may be users out there.

But even James (technically listed as a maintainer) doesn't actually
have a system, and while Alan Cox claims to have a machine in his cellar
that he offered to anybody who wants to take it off his hands, he didn't
argue for keeping MCA support either.

So we could bring it back.  But somebody had better speak up and talk
about how they have actually been using said MCA hardware with modern
kernels for us to do that.  And David already took the patch to delete
all the networking driver code (commit a5e371f61ad3: "drivers/net:
delete all code/drivers depending on CONFIG_MCA").

* 'delete-mca' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  MCA: delete all remaining traces of microchannel bus support.
  scsi: delete the MCA specific drivers and driver code
  serial: delete the MCA specific 8250 support.
  arm: remove ability to select CONFIG_MCA
2012-05-23 17:12:06 -07:00