[ Upstream commit 74da272400 ]
Currently timeout for autoenumeration during probe and bus reset is set to
2 secs which is really a big value. This can have an adverse effect on
boot time if the slave device is not ready/reset.
This was the case with wcd938x which was not reset yet but we spent 2
secs waiting in the soundwire controller probe. Reduce this time to
1/10 of Hz which should be good enough time to finish autoenumeration
if any slaves are available on the bus.
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220506084705.18525-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3120aac6d0 ]
UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e99 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:
dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
module_add_driver from bus_add_driver+0xf4/0x1e4
bus_add_driver from driver_register+0x78/0x10c
driver_register from usb_gadget_register_driver_owner+0x40/0xb4
usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
do_one_initcall from do_init_module+0x44/0x1c8
do_init_module from load_module+0x19b8/0x1b9c
load_module from sys_finit_module+0xdc/0xfc
sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---
Fix this by removing driver->bus entry reset.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b67d19662f ]
usb_get_dev is called in xillyusb_probe. So it is better to call
usb_put_dev before xdev is released.
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220406075703.23464-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63acaa8e9c ]
The documentation for the freeze() method says that it "should quiesce
the device so that it doesn't generate IRQs or DMA". The unspoken
consequence of not doing this is that MSIs aimed at non-boot CPUs may
get fully lost if they're sent during the period where the target CPU is
offline.
The current callbacks for USB HCD do not fully quiesce interrupts,
specifically on XHCI. Change to use the full suspend/resume flow for
freeze/thaw to ensure interrupts are fully quiesced. This fixes issues
where USB devices fail to thaw during hibernation because XHCI misses
its interrupt and cannot recover.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d378f2ae5 ]
There is a deadlock in oxu_bus_suspend(), which is shown below:
(Thread 1) | (Thread 2)
| timer_action()
oxu_bus_suspend() | mod_timer()
spin_lock_irq() //(1) | (wait a time)
... | oxu_watchdog()
del_timer_sync() | spin_lock_irq() //(2)
(wait timer to stop) | ...
We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62b2caef40 ]
There is a deadlock in sa1100_set_termios(), which is shown
below:
(Thread 1) | (Thread 2)
| sa1100_enable_ms()
sa1100_set_termios() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | sa1100_timeout()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.
This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 134a3408c2 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b6bdbd933 ]
There is a deadlock in rtllib_beacons_stop(), which is shown
below:
(Thread 1) | (Thread 2)
| rtllib_send_beacon()
rtllib_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rtllib_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 806c7b5341 ]
There is a deadlock in ieee80211_beacons_stop(), which is shown below:
(Thread 1) | (Thread 2)
| ieee80211_send_beacon()
ieee80211_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | ieee80211_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, ieee80211_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417135407.109536-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d2d0a5cf0 ]
Brad reported that on Apple hardware with Light Ridge or Falcon Ridge
controller, plugging in a chain of Thunderbolt displays (Light Ridge
based controllers) causes all kinds of tearing and flickering. The
reason for this is that on Thunderbolt 1 hardware there is no lane
bonding so we have two independent 10 Gb/s lanes, and currently Linux
tunnels both displays through the lane 1. This makes the displays to
share the 10 Gb/s bandwidth which may not be enough for higher
resolutions.
For this reason make the second tunnel go through the lane 0 instead.
This seems to match what the macOS connection manager is also doing.
Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 689ca31c54 ]
When the driver fails at alloc_hdlcdev(), and then we remove the driver
module, we will get the following splat:
[ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[ 25.077709] Call Trace:
[ 25.077924] <TASK>
[ 25.078108] unregister_hdlc_device+0x16/0x30
[ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt]
Fix this by checking whether the 'info->netdev' is a null pointer first.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 041879b12d ]
There is a deadlock in rtw_joinbss_event_prehandle(), which is shown
below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_joinbss_event_prehandle()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | _rtw_join_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409064953.67420-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc7ad0d77b ]
There is a deadlock in rtw_surveydone_event_callback(),
which is shown below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_surveydone_event_callback()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rtw_scan_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_surveydone_event_callback() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() in
rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise,
spin_lock_bh() will also cause deadlock() in timer handler.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409061836.60529-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f387e86d3a ]
To be sufficiently out of range for the usercopy test to see the lifetime
mismatch, expand the size of the "bad" buffer, which will let it be
beyond current_stack_pointer regardless of stack growth direction.
Paired with the recent addition of stack depth checking under
CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/lkml/762faf1b-0443-5ddf-4430-44a20cf2ec4d@collabora.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 474010127e ]
Right now the (framework) mlock lock is (ab)used for multiple purposes:
1- protecting concurrent accesses over the odr local cache
2- avoid changing samplig frequency whilst buffer is running
Let's start by handling situation #1 with a local lock.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7288ff561d ]
In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory
allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not
properly released as there is no action will be performed by
r8712_usb_dvobj_deinit().
To properly release it, we should call r8712_free_io_queue() in
r8712_usb_dvobj_deinit().
Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called
by r871x_dev_unload() under condition `padapter->bup` and
r8712_free_io_queue() is called by r8712_free_drv_sw().
However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and
calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for
better understading the code.
So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove
r8712_free_io_queue() from r8712_free_drv_sw().
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_B8048C592777830380A23A7C4409F9DF1305@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba93642188 ]
kstrdup() is also a memory allocation-related function, it returns NULL
when some memory errors happen. So it is better to check the return
value of it so to catch the memory error in time. Besides, there should
have a kfree() to clear up the allocation if we get a failure later in
this function to prevent memory leak.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C920CFCC33B9CC1C63141FE1334A39FF8508@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c77676645 ]
The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page. Various terms of the equation cancel out
and you end up with actual == offset. The same issue exists in
iter_xarray_get_pages_alloc().
Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.
This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it. Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.
Fixes: 7ff5062079 ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b843340d ]
Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.
Fixes: 0d630f5898 ("nfp: flower: add support to offload QinQ match")
Fixes: 5a2b930416 ("nfp: flower-ct: compile match sections of flow_payload")
Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aefd8b538 ]
Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:
drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
| ^
due to the extraneous '&' address-of operator.
Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.
Fixes: eb8c88808c ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e67b72b90b ]
In our server, there may be no high order (>= 6) memory since we reserve
lots of HugeTLB pages when booting. Then the system panic. So use
alloc_large_system_hash() to allocate table_perturb.
Fixes: e926147618 ("tcp: dynamically allocate the perturb table used by source ports")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220607070214.94443-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e96930d6 ]
Commit ede359d884 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN
is bypassed") added the ability to link if AN was bypassed, and added
filling of state->an_complete field, but set it to true if AN was
enabled in BMCR, not when AN was reported complete in BMSR.
This was done because for some reason, when I wanted to use BMSR value
to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was
always 1), instead of BMSR_ANEGCOMPLETE bit.
Use BMSR_ANEGCOMPLETE for filling state->an_complete.
Fixes: ede359d884 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11ec18b1d8 ]
Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: bbd2190ce9 ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d21e9963b ]
GRE with TUNNEL_CSUM will apply local checksum offload on
CHECKSUM_PARTIAL packets.
ipgre_xmit must validate csum_start after an optional skb_pull,
else lco_csum may trigger an overflow. The original check was
if (csum && skb_checksum_start(skb) < skb->data)
return -EINVAL;
This had false positives when skb_checksum_start is undefined:
when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement
was straightforward
if (csum && skb->ip_summed == CHECKSUM_PARTIAL &&
skb_checksum_start(skb) < skb->data)
return -EINVAL;
But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
in skb_partial_csum_set in the normal header_ops datapath.
Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.
Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.
Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u
Fixes: 8a0ed250f9 ("ip_gre: validate csum_start only on pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fa5e7b20e ]
When combining two steering rules into one check
not only do they share the same actions but those
actions are also the same. This resolves an issue where
when creating two different rules with the same match
the actions are overwritten and one of the rules is deleted
a FW syndrome can be seen in dmesg.
mlx5_core 0000:03:00.0: mlx5_cmd_check:819:(pid 2105): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444)
Fixes: 0d235c3fab ("net/mlx5: Add hash table to search FTEs in a flow-group")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bf94e6414 ]
The current design does not arm the tracer if traces are available before
the tracer string database is fully loaded, leading to an unfunctional tracer.
This fix will rearm the tracer every time the FW triggers tracer event
regardless of the tracer strings database status.
Fixes: c71ad41ccb ("net/mlx5: FW tracer, events handling")
Signed-off-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c5de097be ]
In some use-cases, mlx5 instances will need to search for their peer
device (the other port on the same HCA). For that, mlx5 device matching
mechanism relied on auxiliary_find_device() to search, and used a bad matching
callback function.
This approach has two issues:
1) next_phys_dev() the matching function, assumed all devices are
of the type mlx5_adev (mlx5 auxiliary device) which is wrong and
could lead to crashes, this worked for a while, since only lately
other drivers started registering auxiliary devices.
2) using the auxiliary class bus (auxiliary_find_device) to search for
mlx5_core_dev devices, who are actually PCIe device instances, is wrong.
This works since mlx5_core always has at least one mlx5_adev instance
hanging around in the aux bus.
As suggested by others we can fix 1. by comparing device names prefixes
if they have the string "mlx5_core" in them, which is not a best practice !
but even with that fixed, still 2. needs fixing, we are trying to
match pcie device peers so we should look in the right bus (pci bus),
hence this fix.
The fix:
1) search the pci bus for mlx5 peer devices, instead of the aux bus
2) to validated devices are the same type "mlx5_core_dev" compare if
they have the same driver, which is bulletproof.
This wouldn't have worked with the aux bus since the various mlx5 aux
device types don't share the same driver, even if they share the same device
wrapper struct (mlx5_adev) "which helped to find the parent device"
Fixes: a925b5e309 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reported-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4c2f2e01 ]
When search for a peer lag device we can filter based on that
device's capabilities.
Downstream patch will be less strict when filtering compatible devices
and remove the limitation where we require exact MLX5_MAX_PORTS and
change it to a range.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5801f064e3 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the caller (net/ipv6/seg6.c)
and the callee (net/ipv6/seg6_hmac.c) belong to the same module.
It seems an internal function call in ipv6.ko.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a388f08d8 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
net/ipv4/xfrm4_policy.c is never compiled as modular.
(CONFIG_XFRM is boolean)
Fixes: 2f32b51b60 ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35b42dce61 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
drivers/net/phy/phy_device.c is never compiled as modular.
(CONFIG_PHYLIB is boolean)
Fixes: 90eff9096c ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c254bf3b6 ]
I found that NFSD's new NFSv3 READDIRPLUS XDR encoder was screwing up
right at the end of the page array. xdr_get_next_encode_buffer() does
not compute the value of xdr->end correctly:
* The check to see if we're on the final available page in xdr->buf
needs to account for the space consumed by @nbytes.
* The new xdr->end value needs to account for the portion of @nbytes
that is to be encoded into the previous buffer.
Fixes: 2825a7f907 ("nfsd4: allow encoding across page boundaries")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d678cbd2f8 ]
xdpxceiver run on a AF_XDP ZC enabled driver revealed a problem with XSK
Tx batching API. There is a test that checks how invalid Tx descriptors
are handled by AF_XDP. Each valid descriptor is followed by invalid one
on Tx side whereas the Rx side expects only to receive a set of valid
descriptors.
In current xsk_tx_peek_release_desc_batch() function, the amount of
available descriptors is hidden inside xskq_cons_peek_desc_batch(). This
can be problematic in cases where invalid descriptors are present due to
the fact that xskq_cons_peek_desc_batch() returns only a count of valid
descriptors. This means that it is impossible to properly update XSK
ring state when calling xskq_cons_release_n().
To address this issue, pull out the contents of
xskq_cons_peek_desc_batch() so that callers (currently only
xsk_tx_peek_release_desc_batch()) will always be able to update the
state of ring properly, as total count of entries is now available and
use this value as an argument in xskq_cons_release_n(). By
doing so, xskq_cons_peek_desc_batch() can be dropped altogether.
Fixes: 9349eb3a9d ("xsk: Introduce batched Tx descriptor interfaces")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220607142200.576735-1-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1bc532e99 ]
Move desc_array from the driver to the pool. The reason behind this is
that we can then reuse this array as a temporary storage for descriptors
in all zero-copy drivers that use the batched interface. This will make
it easier to add batching to more drivers.
i40e is the only driver that has a batched Tx zero-copy
implementation, so no need to touch any other driver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20220125160446.78976-6-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0737e018a0 ]
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
when breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the gphy_fw_np.
Add missing of_node_put() to avoid refcount leak.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220605072335.11257-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f3b29c65 ]
syzbot reported an illegal copy_to_user() attempt
from bpf_prog_get_info_by_fd() [1]
There was no repro yet on this bug, but I think
that commit 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
is exposing a prior bug in bpf arm64.
bpf_prog_get_info_by_fd() looks at prog->jited_len
to determine if the JIT image can be copied out to user space.
My theory is that syzbot managed to get a prog where prog->jited_len
has been set to 43, while prog->bpf_func has ben cleared.
It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering
this particular warning.
I thought find_vma_area(NULL) would not find a vm_struct.
As we do not hold vmap_area_lock spinlock, it might be possible
that the found vm_struct was garbage.
[1]
usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)!
kernel BUG at mm/usercopy.c:101!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0
Hardware name: linux,dummy-virt (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89
sp : ffff80000b773a20
x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48
x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000
x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001
x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd
x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420
x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031
x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865
x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830
x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000
x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:89
check_heap_object mm/usercopy.c:186 [inline]
__check_object_size mm/usercopy.c:252 [inline]
__check_object_size+0x198/0x36c mm/usercopy.c:214
check_object_size include/linux/thread_info.h:199 [inline]
check_copy_size include/linux/thread_info.h:235 [inline]
copy_to_user include/linux/uaccess.h:159 [inline]
bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993
bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253
__sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956
__do_sys_bpf kernel/bpf/syscall.c:5021 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5019 [inline]
__arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52
el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142
do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206
el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624
el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581
Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)
Fixes: db496944fd ("bpf: arm64: add JIT support for multi-function programs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 662a80946c ]
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s
lock held and check if its receive queue is full. Here we need to
use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise
KCSAN will report a data-race.
Fixes: 7d267278a9 ("unix: avoid use-after-free in ep_remove_wait_queue")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e74a4b3ec ]
When the managed API is used, there is no need to explicitly call
pci_free_irq_vectors().
This looks to be a left-over from the commit in the Fixes tag. Only the
.remove() function had been updated.
So remove this unused function call and update goto label accordingly.
Fixes: 8accc46775 ("stmmac: intel: use managed PCI function on probe and resume")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbac14a5a0 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because none of the in-tree call-sites
(arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as
modular.
Fixes: 243848fc01 ("xen/grant-table: Move xlated_setup_gnttab_pages to common place")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220606045920.4161881-1-masahiroy@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a41c64d9c ]
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device
provides the .ndo_setup_tc interface or there is an indirect flow block
that has been registered. Otherwise, bail out early from the preparation
phase. Moreover, validate that family == NFPROTO_NETDEV and hook is
NF_NETDEV_INGRESS.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c271cc9feb ]
Release the list of new hooks that are pending to be registered in case
that unsupported flowtable flags are provided.
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10d6bdf532 ]
of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() to avoid refcount leak.
Fixes: 43f01da0f2 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c9e455977 ]
The hook list is used if nft_trans_flowtable_update(trans) == true. However,
initialize this list for other cases for safety reasons.
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f012e95b37 ]
Prevent svc_rdma_build_writes() from walking off the end of a Write
chunk's segment array. Caught with KASAN.
The test that this fix replaces is invalid, and might have been left
over from an earlier prototype of the PCL work.
Fixes: 7a1cbfa180 ("svcrdma: Use parsed chunk lists to construct RDMA Writes")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e8635fb2e ]
KASAN causes increased stack usage, which can lead to stack overflows.
The logic in Kconfig to suggest a larger default doesn't work if a user
has CONFIG_EXPERT enabled and has an existing .config with a smaller
value.
Follow the lead of x86 and arm64, and force the thread size to be
increased when KASAN is enabled.
That also has the effect of enlarging the stack for 64-bit KASAN builds,
which is also desirable.
Fixes: edbadaf067 ("powerpc/kasan: Fix stack overflow by increasing THREAD_SHIFT")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use MIN_THREAD_SHIFT as suggested by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220601143114.133524-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6d9014a33 ]
Remove inactive bool field in nft_hook object that was introduced in
abadb2f865 ("netfilter: nf_tables: delete devices from flowtable").
Move stale flowtable hooks to transaction list instead.
Deleting twice the same device does not result in ENOENT.
Fixes: abadb2f865 ("netfilter: nf_tables: delete devices from flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla
Marek Szyprowski
Changbin Du
Hangyu Hua
Evan Green
Duoming Zhou
Zhen Ni
Mika Westerberg
Huang Guobin
Zheyu Ma
Kees Cook
Miquel Raynal
Xiaoke Wang
David Howells
Etienne van der Linde
Linus Torvalds
Muchun Song
Marek Behún
Miaoqian Lin
Willem de Bruijn
Mark Bloch
Feras Daoud
Saeed Mahameed
Masahiro Yamada
Chuck Lever
Maciej Fijalkowski
Magnus Karlsson
Gal Pressman
Eric Dumazet
Kuniyuki Iwashima
Christophe JAILLET
Pablo Neira Ayuso
Michael Ellerman