This patch removes some now dead code.
Spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_max_file_offset() was over-estimating the largest file size for
several cases. This wasn't really a problem before, but now that we support
sparse files, it needs to be more accurate.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We have to manually check the requested truncate size as the check in
vmtruncate() comes too late for Ocfs2.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_align_clusters_to_page_index() needs to cast the clusters shift to
pgoff_t and ocfs2_file_buffered_write() needs loff_t when calculating
destination start for memcpy.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There's no need to recalculate things via ocfs2_max_file_offset() as we've
already done that to fill s_maxbytes, so use that instead. We can also
un-export ocfs2_max_file_offset() then.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_update_inode_atime() calls ocfs2_mark_inode_dirty() to push changes
from the struct inode into the ocfs2 disk inode. The problem is,
ocfs2_mark_inode_dirty() might change other fields, depending on what
happened to the struct inode. Since we don't always have locking to
serialize changes to other fields (like i_size, etc), just fix things up to
only touch the atime field.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
kunmap_atomic() takes the virtual address, not the mapped page as
argument.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix page index to offset conversion overflows in buffer layer, ecryptfs,
and ocfs2.
It would be nice to convert the whole tree to page_offset, but for now
just fix the bugs.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Change ->fault prototype. We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things. This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).
This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.
struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.
The page is now returned via a page pointer in the vm_fault struct.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.
->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping. The hitch here
is that the ->nopage handler didn't pass down enough information (ie. pgoff).
But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).
Having the populate handler install the pte itself is likewise a nasty thing
to be doing.
This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn. Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.
The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.
After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache. Seems like a fringe functionality anyway.
NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no
users have hit mainline yet.
[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the race between invalidate_inode_pages and do_no_page.
Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.
The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache. Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.
The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.
Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).
Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size. do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size). The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data. Valid mappings to the same
place will see a different page.
Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit. He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight. However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit. Scalability is not an issue.
This patch implements this latter approach. ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so). do_no_page only unlocks the page after setting up the mapping
completely. invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).
This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than using a tri-state integer for the wait flag in
call_usermodehelper_exec, define a proper enum, and use that. I've
preserved the integer values so that any callers I've missed should
still work OK.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: David Howells <dhowells@redhat.com>
* 'uninit-var' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
arch/i386/* fs/* ipc/*: mark variables with uninitialized_var()
drivers/*: mark variables with uninitialized_var()
Mark variables with uninitialized_var() if such a warning appears,
and analysis proves that the var is initialized properly on all paths
it is used.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Introduce is_owner_or_cap() macro in fs.h, and convert over relevant
users to it. This is done because we want to avoid bugs in the future
where we check for only effective fsuid of the current task against a
file's owning uid, without simultaneously checking for CAP_FOWNER as
well, thus violating its semantics.
[ XFS uses special macros and structures, and in general looked ...
untouchable, so we leave it alone -- but it has been looked over. ]
The (current->fsuid != inode->i_uid) check in generic_permission() and
exec_permission_lite() is left alone, because those operations are
covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations
falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone.
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: Al Viro <viro@ftp.linux.org.uk>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
currently the export_operation structure and helpers related to it are in
fs.h. fs.h is already far too large and there are very few places needing the
export bits, so split them off into a separate header.
[akpm@linux-foundation.org: fix cifs build]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (32 commits)
[PATCH] ocfs2: zero_user_page conversion
ocfs2: Support xfs style space reservation ioctls
ocfs2: support for removing file regions
ocfs2: update truncate handling of partial clusters
ocfs2: btree support for removal of arbirtrary extents
ocfs2: Support creation of unwritten extents
ocfs2: support writing of unwritten extents
ocfs2: small cleanup of ocfs2_write_begin_nolock()
ocfs2: btree changes for unwritten extents
ocfs2: abstract btree growing calls
ocfs2: use all extent block suballocators
ocfs2: plug truncate into cached dealloc routines
ocfs2: simplify deallocation locking
ocfs2: harden buffer check during mapping of page blocks
ocfs2: shared writeable mmap
ocfs2: factor out write aops into nolock variants
ocfs2: rework ocfs2_buffered_write_cluster()
ocfs2: take ip_alloc_sem during entire truncate
ocfs2: Add "preferred slot" mount option
[KJ PATCH] Replacing memset(<addr>,0,PAGE_SIZE) with clear_page() in fs/ocfs2/dlm/dlmrecovery.c
...
sysfs is now completely out of driver/module lifetime game. After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners. Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.
This patch kills now unnecessary attribute->owner. Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.
For more info regarding lifetime rule cleanup, please read the
following message.
http://article.gmane.org/gmane.linux.kernel/510293
(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We re-use the RESVSP/UNRESVSP ioctls from xfs which allow the user to
allocate and deallocate regions to a file without zeroing data or changing
i_size.
Though renamed, the structure passed in from user is identical to struct
xfs_flock64. The three fields that are actually used right now are l_whence,
l_start and l_len.
This should get ocfs2 immediate compatibility with userspace software using
the pre-existing xfs ioctls.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Provide an internal interface for the removal of arbitrary file regions.
ocfs2_remove_inode_range() takes a byte range within a file and will remove
existing extents within that range. Partial clusters will be zeroed so that
any read from within the region will return zeros.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The partial cluster zeroing code used during truncate usually assumes that
the rightmost byte in the range to be zeroed lies on a cluster boundary.
This makes sense for truncate, but punching holes might require zeroing on
non-aligned rightmost boundaries.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Add code to the btree paths to support the removal of arbitrary regions
within an existing extent. With proper higher level support this can be used
to "punch holes" in a file. Truncate (a special case of hole punching) could
also be converted to use these methods.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This can now be trivially supported with re-use of our existing extend code.
ocfs2_allocate_unwritten_extents() takes a start offset and a byte length
and iterates over the inode, adding extents (marked as unwritten) until len
is reached. Existing extents are skipped over.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Update the write code to detect when the user is asking to write to an
unwritten extent. Like writing to a hole, we must zero the region between
the write and the cluster boundaries. Most of the existing cluster zeroing
logic can be re-used with some additional checks for the unwritten flag on
extent records.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Writes to a region marked as unwritten might result in a record split or
merge. We can support splits by making minor changes to the existing insert
code. Merges require left rotations which mostly re-use right rotation
support functions.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The top level calls and logic for growing a tree can easily be abstracted
out of ocfs2_insert_extent() into a seperate function - ocfs2_grow_tree().
This allows future code to easily grow btrees when needed.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Now that we have a method to deallocate blocks from them, each node should
allocate extent blocks from their local suballocator file.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Deallocation of suballocator blocks, most notably extent blocks, might
involve multiple suballocator inodes.
The locking for this can get extremely complicated, especially when the
suballocator inodes to delete from aren't known until deep within an
unrelated codepath.
Implement a simple scheme for recording the blocks to be unlinked so that
the actual deallocation can be done in a context which won't deadlock.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We don't want to submit buffer_new blocks for read i/o. This actually won't
happen right now because those requests during an allocating write are all nicely
aligned. It's probably a good idea to provide an explicit check though.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_mkwrite() will want this so that it can add some mmap specific checks
before asking for a write.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Use some ideas from the new-aops patch series and turn
ocfs2_buffered_write_cluster() into a 2 stage operation with the caller
copying data in between. The code now understands multiple cluster writes as
a result of having to deal with a full page write for greater than 4k pages.
This sets us up to easily call into the write path during ->page_mkwrite().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Use of the alloc sem during truncate was too narrow - we want to protect
the i_size change and page truncation against mmap now.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2 will attempt to assign the node the slot# provided in the mount
option. Failure to assign the preferred slot is not an error. This small
feature can be useful for automated testing.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Replacing memset(<addr>,0,PAGE_SIZE) with clear_page() in
fs/ocfs2/dlm/dlmrecovery.c
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Tell o2cb_region_dev_write() to wake up if rmdir(2) happens on the
heartbeat region while it is starting up. Then o2hb_region_dev_write()
can check to see if it is alive and act accordingly. This prevents a hang
(not being woken) and a crash (if it's woken by a signal).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Removing the local node configuration out from underneath a running
heartbeat is "bad". Provide an API in the ocfs2 nodemanager to request
a configfs dependancy on the local node, then use it in heartbeat.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2 mounts require a heartbeat region. Use the new configfs_depend_item()
facility to actually depend on them so they can't go away from under us.
First, teach cluster/nodemanager.c to depend an item on the o2cb subsystem.
Then teach o2hb_register_callbacks to take a UUID and depend on the
appropriate region. Finally, teach all users of o2hb to pass a UUID or
NULL if they don't require a pin.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Convert the su_sem member of struct configfs_subsystem to a struct
mutex, as that's what it is. Also convert all the users and update
Documentation/configfs.txt and Documentation/configfs_example.c
accordingly.
[ Conflict in fs/dlm/config.c with commit
3168b0780d manually resolved. --Mark ]
Inspired-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The name 'pin' was badly chosen, it doesn't pin a pipe buffer
in the most commonly used sense in the kernel. So change the
name to 'confirm', after debating this issue with Hugh
Dickins a bit.
A good return from ->confirm() means that the buffer is really
there, and that the contents are good.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We need to move even more stuff into the header so that folks can use
the splice_to_pipe() implementation instead of open-coding a lot of
pipe knowledge (see relay implementation), so move to our own header
file finally.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
A bit of a cheat, it actually just copies the data to userspace. But
this makes the interface nice and symmetric and enables people to build
on splice, with room for future improvement in performance.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
For direct splicing (or private splicing), the output may not be a file.
So abstract out the handling into a specified actor function and put
the data in the splice_desc structure earlier, so we can build on top
of that.
This is the first step in better splice handling for drivers, and also
for implementing vmsplice _to_ user memory.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The write path code intends to bug if a math error (or unhandled case)
results in a write outside of the current cluster boundaries. The actual
BUG_ON() statements however are incorrect, leading to a crash on kernels
with 64k page size. Fix those by checking against the right variables.
Also, move the assertions higher up within the functions so that they trip
*before* the code starts to mark buffers.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Some of the sysfs changes inadvertantly broke the simple runtime debug log
filtering employed in ocfs2. Fix this by properly exporting the masklog
category filter names.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We weren't cleaning up our inode reference on error in
ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if
need be. Move the code to set the alloc context inode info to the end of the
function so we don't have any possibility of passing back a bad pointer.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Use zero_user_page() instead of open-coding it.
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Similarly to the page lock / cluster lock inversion in ocfs2_readpage, we
can deadlock on ip_alloc_sem. We can down_read_trylock() instead and just
return AOP_TRUNCATED_PAGE if the operation fails.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by
SLAB.
I think its purpose was to have a callback after an object has been freed
to verify that the state is the constructor state again? The callback is
performed before each freeing of an object.
I would think that it is much easier to check the object state manually
before the free. That also places the check near the code object
manipulation of the object.
Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
compiled with SLAB debugging on. If there would be code in a constructor
handling SLAB_DEBUG_INITIAL then it would have to be conditional on
SLAB_DEBUG otherwise it would just be dead code. But there is no such code
in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real
use of, difficult to understand and there are easier ways to accomplish the
same effect (i.e. add debug code before kfree).
There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
clear in fs inode caches. Remove the pointless checks (they would even be
pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.
This is the last slab flag that SLUB did not support. Remove the check for
unimplemented flags from SLUB.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure pages are uptodate after returning from read_cache_page, which allows
us to cut out most of the filesystem-internal PageUptodate calls.
I didn't have a great look down the call chains, but this appears to fixes 7
possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in
ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in
block2mtd. All depending on whether the filler is async and/or can return
with a !uptodate page.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: Force use of GFP_NOFS in ocfs2_write()
ocfs2: fix sparse warnings in fs/ocfs2/cluster
ocfs2: fix sparse warnings in fs/ocfs2/dlm
ocfs2: fix sparse warnings in fs/ocfs2
[PATCH] Copy i_flags to ocfs2 inode flags on write
[PATCH] ocfs2: use __set_current_state()
ocfs2: Wrap access of directory allocations with ip_alloc_sem.
[PATCH] fs/ocfs2/: make 3 functions static
ocfs2: Implement compat_ioctl()
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes. The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.
Thanks to Kay for fixing the bugs in this patch.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into
ocfs2-specific ip_attr. Hence, when someone sets these flags via a different
interface than ioctl, they are stored correctly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
use __set_current_state(TASK_*) instead of current->state = TASK_*, in
fs/ocfs2
Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
OCFS2_I(inode)->ip_alloc_sem is a read-write semaphore protecting
local concurrent access of ocfs2 inodes. However, ocfs2 directories were
not taking the semaphore while they accessed or modified the allocation
tree.
ocfs2_extend_dir() needs to take the semaphore in a write mode when it
adds to the allocation. All other directory users get there via
ocfs2_bread(), which takes the semaphore in read mode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch makes the following needlessly global functions static:
- aops.c: ocfs2_write_data_page()
- dlmglue.c: ocfs2_dump_meta_lvb_info()
- file.c: ocfs2_set_inode_size()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The extent map code was ripped out earlier because of an inability to deal
with holes. This patch adds back a simpler caching scheme requiring far less
code.
Our old extent map caching was designed back when meta data block caching in
Ocfs2 didn't work very well, resulting in many disk reads. These days our
metadata caching is much better, resulting in no un-necessary disk reads. As
a result, extent caching doesn't have to be as fancy, nor does it have to
cache as many extents. Keeping the last 3 extents seen should be sufficient
to give us a small performance boost on some streaming workloads.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cluster locking might have been redone because a direct write won't
complete, so this needs to be reflected in the iocb.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Older file systems which didn't support holes did a dumb calculation of
i_blocks based on i_size. This is no longer accurate, so fix things up to
take actual allocation into account.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Initially, we had wired things to return a size '1' of holes. Cook up a
small amount of code to find the next extent and calculate the number of
clusters between the virtual offset and the next allocated extent.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Return an optional extent flags field from our lookup functions and wire up
callers to treat unwritten regions as holes for the purpose of returning
zeros to the user.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Due to the size of our group bitmaps, we'll never have a leaf node extent
record with more than 16 bits worth of clusters. Split e_clusters up so that
leaf nodes can get a flags field where we can mark unwritten extents.
Interior nodes whose length references all the child nodes beneath it can't
split their e_clusters field, so we use a union to preserve sizing there.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We need to fill holes during a splice write. Provide our own splice write
actor which can call ocfs2_file_buffered_write() with a splice-specific
callback.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Do this instead of filemap_fdatawrite() - this way we sync only the
range between i_size and the cluster boundary.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Since we don't zero on extend anymore, truncate needs to be fixed up to zero
the part of a file between i_size and and end of it's cluster. Otherwise a
subsequent extend could expose bad data.
This introduced a new helper, which can be used in ocfs2_write().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_get_block() didn't understand sparse files, fix that. Also remove some
code that isn't really useful anymore. We can fix up
ocfs2_direct_IO_get_blocks() at the same time.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Unfortunately, ocfs2 can no longer make use of generic_file_aio_write_nlock()
because allocating writes will require zeroing of pages adjacent to the I/O
for cluster sizes greater than page size.
Implement a custom file write here, which can order page locks for zeroing.
This also has the advantage that cluster locks can easily be ordered outside
of the page locks.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Right now, file allocation for ocfs2 is done within ocfs2_extend_file(),
which is either called from ->setattr() (for an i_size change), or at the
top of ocfs2_file_aio_write().
Inodes on file systems with sparse file support will want to do their
allocation during the actual write call.
In either case the cluster locking decisions are the same. We abstract out
that code into a new function, ocfs2_lock_allocators() which will be used by
a later patch to enable writing to sparse files.
This also provides a nice cleanup of ocfs2_extend_allocation().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
For ocfs2_truncate_file(), we eliminate the "simple" truncate case which no
longer exists since i_size is not tied to i_clusters. In
ocfs2_extend_file(), we skip the allocation / page zeroing code for file
systems which understand sparse files.
The core truncate code is changed to do a bottom up tree traversal. This
gets abstracted out into it's own function. To make things more readable,
most of the special case handling for in-inode extents from
ocfs2_do_truncate() is also removed.
Though write support for sparse files comes in a later patch, we at least
update ocfs2_prepare_inode_for_write() to skip allocation for sparse files.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The code in extent_map.c is not prepared to deal with a subtree being
rotated between lookups. This can happen when filling holes in sparse files.
Instead of a lengthy patch to update the code (which would likely lose the
benefit of caching subtree roots), we remove most of the algorithms and
implement a simple path based lookup. A less ambitious extent caching scheme
will be added in a later patch.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Introduce tree rotations into the b-tree code. This will allow ocfs2 to
support sparse files. Much of the added code is designed to be generic (in
the ocfs2 sense) so that it can later be re-used to implement large
extended attributes.
This patch only adds the rotation code and does minimal updates to callers
of the extent api.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There are two checks in there (one for inode newness, one for other mounted
nodes) which are unnecessary, so remove them. The DLM will allow the trylock
in either case without any messaging overhead.
Removing these makes ocfs2_request_delete() a one liner function, so just
move the trylock out one level into ocfs2_query_inode_wipe().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Remove node messaging code that becomes unused with the delete inode vote
removal.
[Removed even more cruft which I spotted during review --Mark]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Ocfs2 currently does cluster-wide node messaging to check the open state of
an inode during delete. This patch removes that mechanism in favor of an
inode cluster lock which is taken at shared read when an inode is first read
and dropped in clear_inode(). This allows a deleting node to test the
liveness of an inode by attempting to take an exclusive lock.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We don't want to print anything at all in ocfs2_lookup() when getting an
error from ocfs2_iget() - it could be something as innocuous as a signal
being detected in the dlm.
ocfs2_permission() should filter on -ENOENT which ocfs2_meta_lock() can
return if the inode was deleted on another node.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We have noticed panic() hanging leading us to a situation in which
the node, while otherwise dead, is still disk heartbeating. This
leads to a hung cluster as the other nodes are waiting for this
node to stop disk heartbeating. This situation is only resolved
by power resetting the box.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We don't want the extent map and uptodate cache destruction in
ocfs2_meta_lock_update() on a local mount, so skip that.
This fixes several bugs with uptodate being cleared on buffers and extent
maps being corrupted.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
In dlm_migrate_all_locks(), we currently call cond_resched_lock() after
processing each lockres in a hash bucket. Move it outside the loop so as to
call it only after the entire hash bucket has been processed.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There is a possibility that dlm_remaster_locks could overwride node->state
with DLM_RECO_NODE_DATA_REQUESTED after dlm_reco_data_done_handler sets the
node->state to DLM_RECO_NODE_DATA_DONE. This could lead to recovery getting
stuck and requires a cluster reboot. Synchronize with dlm_reco_state_lock
spinlock.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
In dlm_migrate_lockres(), we check upfront whether the lockres is a
candidate for migration. This patch encapsulates that code in a separate
function so that dlm_empty_lockres() can also use it during umount. This
patch addresses the umount process spinning problem.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
During umount, the umount thread migrates the lockres' and the dlm_thread
frees the empty lockres'. Due to a race, the reference counting on the
lockres goes awry leading to extra puts.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
__dlm_lockres_unused() expects the caller to take the lockres spinlock.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
In some circumstances, this was causing us to reference freed memory.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Under load, OCFS2 would crash in invalidate_inode_pages2_range() because
invalidate_complete_page2() was unable to invalidate a page. It would
appear that JBD is holding on to the page. ext3 has a specific
->releasepage() handler to cover this case.
Steal ext3's ->releasepage(), ->invalidatepage(), and ->migratepage(), as
they appear completely appropriate for OCFS2.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This means that a build-up and a teardown could race which would result in a
double-kthread_stop().
Protect the setting and clearing of hr_task with o2hb_live_lock, as it's not
a common thing and not performance critical.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
If ocfs2_register_hb_callbacks() succeeds on its first callback but fails
its second, it doesn't release the first on the way out. Fix that.
While we're at it, o2hb_unregister_callback() never returns anything but
0, so let's make it void.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name. Which is
pain for caching and the proc interface never implemented.
I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.
So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2 was did not have the binary number it uses under CTL_FS registered in
sysctl.h. Register it to avoid future conflicts, and change the name of the
definition to be in line with the rest of the sysctl numbers.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".
Compile tested with gcc & sparse.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As was already pointed out Mathieu Avila on Thu, 07 Sep 2006 03:15:25 -0700
that OCFS2 is expecting bio_add_page() to add pages to BIOs in an easily
predictable manner.
That is not true, especially for devices with own merge_bvec_fn().
Therefore OCFS2's heartbeat code is very likely to fail on such devices.
Move the bio_put() call into the bio's bi_end_io() function. This makes the
whole idea of trying to predict the behaviour of bio_add_page() unnecessary.
Removed compute_max_sectors() and o2hb_compute_request_limits().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
When there is a lot of multithreaded I/O usage, two threads can collide
while sending out a message to the other nodes. This is due to the lack of
locking between threads while sending out the messages.
When a connected TCP send(), sendto(), or sendmsg() arrives in the Linux
kernel, it eventually comes through tcp_sendmsg(). tcp_sendmsg() protects
itself by acquiring a lock at invocation by calling lock_sock().
tcp_sendmsg() then loops over the buffers in the iovec, allocating
associated sk_buff's and cache pages for use in the actual send. As it does
so, it pushes the data out to tcp for actual transmission. However, if one
of those allocation fails (because a large number of large sends is being
processed, for example), it must wait for memory to become available. It
does so by jumping to wait_for_sndbuf or wait_for_memory, both of which
eventually cause a call to sk_stream_wait_memory(). sk_stream_wait_memory()
contains a code path that calls sk_wait_event(). Finally, sk_wait_event()
contains the call to release_sock().
The following patch adds a lock to the socket container in order to
properly serialize outbound requests.
From: Zhen Wei <zwei@novell.com>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Currently the ocfs2 dlm has no timeout during dlm join domain. While this is
not a problem in normal operation, this does become an issue if, say, the
other node is refusing to let the node join the domain because of a stuck
recovery. This patch adds a 90 sec timeout.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
These messages can easily be activated using the mlog infrastructure
and don't need to be enabled by default.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There is a small window where a joining node may not see the node(s) that
just died but are still part of the domain. To fix this, we must disallow
join requests if the joining node has a different node map.
A new field node_map is added to dlm_query_join_request to send the current
nodes nodemap along with join request. On the receiving end the nodes that
are part of the cluster verifies if this new node sees all the nodes that
are still part of the cluster. They disallow the join if the maps mismatch.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Eventhough the set refmap bit message is sent before the clear refmap
message, currently there is no guarentee that the set message will be
handled before the clear. This patch prevents the clear refmap to be
processed while the node is sending assert master messages to other
nodes. (The set refmap message is sent as a response to the assert
master request).
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch binds the o2net listener to the configured ip address
instead of INADDR_ANY for security. Fixes oss.oracle.com bugzilla#814.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch prevents the dlm from sending the clear refmap message
before the set refmap. We use the newly created post function handler
routine to accomplish the task.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Currently o2net allows one handler function per message type. This
patch adds the ability to call another function to be called after
the handler has returned the message to the other node.
Handlers are now given the option of returning a context (in the form of a
void **) which will be passed back into the post message handler function.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The dlm encodes the node number and a sequence number in the lock cookie.
It also stores the cookie in the lockres in the big endian format to avoid
swapping 8 bytes on each lock request. The bug here was that it was assuming
the cookie to be in the cpu format when decoding it for printing the error
message. This patch swaps the bytes before the print.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
When the lockres is in migrate or recovery state, all convert requests
are denied with the appropriate error status that is handled on the
requester node. This patch silences the erroneous error message printed
on the master node.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The dlm was not waking up threads waiting on the lockres wait queue,
waiting for the lockres to be no longer be in the DLM_LOCK_RES_IN_PROGRESS
and the DLM_LOCK_RES_MIGRATING states.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlm_dispatch_work was not processing the queued up tasks at
the first sign of the node leaving the domain leading to not
only incompleted tasks but also a mismatch in the dlm refcnt.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This is to prevent the condition in which a previously queued
up assert master asserts after we start the migration. Now
migration ensures the workqueue is flushed before proceeding
with migrating the lock to another node. This condition is
typically encountered during parallel umounts.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The migrate lockres handler was only searching for its lock on
migrated lockres on the expected queue. This could be problematic
as the new master could have also issued a convert request
during the migration and thus moved the lock to the convert queue.
We now search for the lock on all three queues.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlmunlock() was not waiting for migration to complete before releasing locks
on locally mastered locks.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
dlmthread was removing lockres' from the dirty list
and resetting the dirty flag before shuffling the list.
This patch retains the dirty state flag until the lists
are shuffled.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Sunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch makes some needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This was previously broken and migration of some locks had to be temporarily
disabled. We use a new (and backward-incompatible) set of network messages
to account for all references to a lock resources held across the cluster.
once these are all freed, the master node may then free the lock resource
memory once its local references are dropped.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Commit 592282cf2e fixed some missing directory
c/mtime updates in part by introducing a dinode update in ocfs2_add_entry().
Unfortunately, ocfs2_link() (which didn't update the directory inode before)
is now missing a single journal credit. Fix this by doubling the number of
inode updates expected during hard link creation.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Fix a bug which was introduced when I synced up ocfs2_fs.h with ocfs2-tools.
We can't do u64/u32 in kernel.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get rid of some error prints in the ocfs2_iget() path from
ocfs2_get_dentry(). NFSD can easily cause us to read stale inodes.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2 wasn't updating c/mtime on directories during dirent
creation/deletion. Fix ocfs2_unlink(), ocfs2_rename() and
__ocfs2_add_entry() by adding the proper code to update the struct inode and
push the change out to disk.
This helps rename/unlink on nfs exported file systems in particular as those
clients compare directory time values to avoid a full re-reading a directory
which hasn't changed.
ocfs2_rename() loses some superfluous error handling as a result of this
patch.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We shouldn't print errors returned from vfs_follow_link(). This was causing
spurious errors to show up in the logs.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The patch allows the ocfs2 heartbeat thread to prioritize I/O which may
help cut down on spurious fencing. Most of this will be in the tools -
we can have a pid configfs attribute and let userspace (ocfs2_hb_ctl)
calls the ioprio_set syscall after starting heartbeat, but only cfq
scheduler supports I/O priorities now.
Signed-off-by: Zhen Wei <zwei@novell.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mmap-heavy clustered workloads were sometimes finding stale data on mmap
reads. The solution is to call unmap_mapping_range() on any down convert of
a data lock.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_direct_IO_get_blocks() was incorrectly returning -EIO for a direct I/O
read whose start block was past the end of the file allocation tree. Fix
things so that we return a hole instead. do_direct_IO() will then notice
that the range start is past eof and return a short read.
While there, remove the unused vbo_max variable.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the
equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect
ordering of the first two arguments are fixed.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update ocfs2_should_update_atime() to understand the MNT_RELATIME flag and
to test against mtime / ctime accordingly.
[akpm@osdl.org: cleanups]
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modify the OCFS2 handshake to ensure essential timeouts are configured
identically on all nodes.
Only allow changes when there are no connected peers
Improves the logic in o2net_advance_rx() which broke now that
sizeof(struct o2net_handshake) is greater than sizeof(struct o2net_msg)
Included is the field for userspace-heartbeat timeout to avoid the need for
further protocol changes.
Uses a global spinlock to ensure the decisions to update configfs entries
are made on the correct value. The region covered by the spinlock when
incrementing the counter is much larger as this is the more critical case.
Small cleanup contributed by Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Beekhof <abeekhof@suse.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Allow configuration of OCFS2 timeouts from userspace via configfs
Signed-off-by: Andrew Beekhof <abeekhof@suse.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Adrian Bunk
Mark Fasheh
Jens Axboe
Nick Piggin
Paul Mundt
Linus Torvalds
Jeremy Fitzhardinge
Jeff Garzik
Satyam Sharma
Christoph Hellwig
Tejun Heo
Eric Sandeen
Sunil Mushran
Shani Moideen
Christoph Hellwig
Joel Becker
Tiger Yang
Nate Diller
Christoph Lameter
Randy Dunlap
Greg Kroah-Hartman
Jan Kara
Milind Arun Choudhary
Srinivas Eeda
Uwe Kleine-König
Eric W. Biederman
Josef 'Jeff' Sipek
Arjan van de Ven
Philipp Reisner
Zhen Wei
Kurt Hackel
Robert P. J. Day
Linus Torvalds
Andrew Beekhof
Josef Sipek
Jeff Mahoney