The Octeon driver calls into PHYLIB which now checks for
net_device->dev.parent, so make sure we do set it before calling into
any MDIO/PHYLIB related function.
Fixes: ec988ad78e ("phy: Don't increment MDIO bus refcount unless it's a different owner")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_node_put needs to be called when the device node which is got
from of_parse_phandle is no longer used.
This patch is found by below coccinelle script:
@@
expression e,e1,e2;
@@
*e = of_parse_phandle(...)
... when != of_node_put(e)
when != true e == NULL
when != e2 = e
e = e1
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ugly magic number 65392 is waiting for CVMX_IPD_MAX_MTU
to appear in the mips tree.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop using cvmx_helper_link_autoconf(). We want to remove it in the future,
as it duplicates link state information into platform code for no reason.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent poll before the RX init has been completed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RX path uses pknd to find the correct device, and we maintain 1:1
port to pknd mapping. However, this is only set for XAUI interfaces
(in the arch code). But it should be set for all interface types.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable taking multiple RX groups into use.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move group number into RX group data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move IRQ number into RX group specific data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create a struct for RX group specific data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move common poll code into a separate function.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass the NAPI instance reference to the interrupt handler.
This is preparation for having multiple NAPI instances.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use passed interrupt number in the handler, so we can avoid using
the global variable.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable RX interrupts in oct_rx_shutdown(). This way we don't need to
expose the RX IRQ numbers outside the RX module.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
There was a check on CAP_NET_ADMIN in cvm_oct_set_settings, but this
check is already done in dev_ethtool, so no need to repeat it before
calling the generic function.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There will be a separate banner message after pow0 is set up (or an
error message if it failed).
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for pow0 port first before calling the interface helper. This
avoids the following error log when setting up pow0 interface:
cvmx_helper_get_interface_num: Illegal IPD port number
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some helper functions call INDEX before checking if the interface is
valid. Since pow0 is not a real interface, we get the following errors:
cvmx_helper_get_interface_index_num: Illegal IPD port number
Fix by using INDEX only when needed with real interfaces.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alignment should match open parenthesis. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prefer the use of type int instead of int32_t. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Braces should be used on all arms of the if statement. Checkpatch
detected this issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the use of multiple blank lines. Checkpatch detected these issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lines should be adjusted to 80 characters. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Blank lines are not necessary after an open brace. Checkpatch detected
these issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comparison to NULL should be avoided in conditions. Chackpatch detected
these issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Blank line is inserted after a struct declaration. Checkpatch detected
these issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logical continuations should be on the previous line. Checkpatch detected this issue.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop cvm_oct_poll_queue by using system_wq.
There are multiple work items per cvm_oct_poll_queue (viz.
cvm_oct_rx_refill_work, port_periodic_work) and different
cvm_oct_poll_queues need not be be ordered. Hence, concurrency
can be increased by switching to system_wq.
All work items are sync canceled in cvm_oct_remove() so it
is guaranteed that no work is in flight by the time exit path runs.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "blank lines aren't necessary after an open brace '{'"
checkpatch.pl warning in ethernet.c
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have only one NAPI poll running at a time, so virtual port rx counters
can be updated normally.
Update of rx_dropped can still race with the gathering of statistics,
but full accuracy is not required there.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support fixed-link PHYs. This allows to remove some of the board-specific
link cvmx_helper code in the future.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor RGMII 10 Mbps preamble error checking. The current implementation
does not work correctly in phydev mode since only the link status changes
trigger the callback, and if we stay on 10 Mbps operation the periodic
checks for error counters are never done.
Provide a periodic worker also during the phydev operation, and notify
the link status changes through the phydev instead of the inband
status change interrupt. This also has the benefit that we don't need
to use legacy CVMX MDIO calls to check the PHY state, and we can avoid
races that trigger bogus "Using 10Mbps with software preamble removal"
logs when interfaces are being bringed up. It also avoids some corner-case
crashes when the in-band interrupt triggers while the interface is
being taken down.
Tested on EdgeRouter Lite & D-Link DSR-1000N.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed blank line after curly braces.
Found using checkpatch.pl.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only wake tx queue when driver queue is back within bounds.
The logic here was just reenabling the queue when any buffers had been
freed. the queue was stopped whenever the length exceeded 1000
(MAX_OUT_QUEUE_DEPTH), but then was essentially immediately started again.
On a congested link, the queue length would just keep increasing up to
around 8000 (for average size packets), at which point the hardware would
start refusing the packets and they would begin to be dropped.
This prevented the qdisc layer from effectively managing and prioritising
packets, as essentially all packets were being allowed into the driver
queue and then were being dropped by the hardware.
This change only restarts the queue if the length is less than 1000
(MAX_OUT_QUEUE_DEPTH).
Reviewed-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the network portion of a frame is preceded by more than 14 bytes of
data, the checksum calculated in the HW is done over the wrong data and
is put in the wrong place.
In our use case an Octeon ethernet controller is connected to a Broadcom
switch chip. Extra data is included in the frame prior to egressing the
Octeon ethernet (i.e. 4 bytes of an 802.1Q tag, 4 bytes of a proprietary
BCM tag later stripped by the switch chip). This extra data causes the
checksum calculation to be incorrect.
The fix in this patch is to make use of the network header offset of the
skb. This enables the checksum to be calculated correctly.
This has been tested in both the configuration with the switch chip in
the egress path (as described above) and in a simple connection direct
to the wire.
Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Reviewed-by: Tim Beale <tim.beale@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big staging driver pull request for 4.5-rc1. Lots of
cleanups and fixes here, not as many as some releases, but 800+ isn't
that bad. Full details in the shortlog. All of these have been in
linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlaV0VgACgkQMUfUDdst+ykvAwCeIN/Ot3OuWD/d1RQrcUzh028H
rlUAn3YOHCFlQhAnUI+9KMNjH0CwAJKp
=Oij1
-----END PGP SIGNATURE-----
Merge tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 4.5-rc1.
Lots of cleanups and fixes here, not as many as some releases, but
800+ isn't that bad. Full details in the shortlog. All of these have
been in linux-next for a while"
* tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (843 commits)
Revert "arm64: dts: Add dts files to enable ION on Hi6220 SoC."
staging: gdm724x: constify tty_port_operations structs
staging: gdm72xx: add userspace data struct
staging: gdm72xx: Replace timeval with ktime_t
iio: adc: ina2xx: Fix incorrect report of data endianness to userspace.
iio: light: us5182d: Refactor read_raw function
iio: light: us5182d: Add interrupt support and events
iio: light: us5182d: Fix enable status inconcistency
iio: Make IIO value formating function globally available.
staging: emxx_udc: use list_first_entry_or_null()
staging/emxx_udc: fix 64-bit warnings
STAGING: COMEDI: Using kernel types in plx9080.h
STAGING: COMEDI: Added spaces around binary operators in plx9080.h
STAGING: COMEDI: Fixed format of comments in plx9080.h
staging: comedi: comedilib.h: Coding style warning fix for block comments
staging: comedi: s526: add macros for counter control reg values
staging: comedi: s526: replace counter mode bitfield struct
staging: comedi: check for more errors for zero-length write
staging: comedi: simplify returned errors for comedi_write()
staging: comedi: return error on "write" if no command set up
...
The mdio device patches moved the bus member in phy_device into a
substructure. This driver got missed. Fix it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add space around operator '+'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '+' (ctx:VxV)
Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the explicit NULL comparison and rewrite in a compact form.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the explicit NULL comparison and rewrite in a compact form.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli
Jarod Wilson
Sandhya Bankar
Cathal Mullaney
Gargi Sharma
Asbjoern Sloth Toennesen
Aaro Koskinen
Javier Martinez Canillas
Philippe Reynes
Aaro Koskinen
Laura Garcia Liebana
Bhaktipriya Shridhar
Dilek Uzulmez
Janani Ravichandran
Bhumika Goyal
Luuk Paulussen
Hamish Martin
Linus Torvalds
Andrew Lunn
Burcin Akalin
Muhammad Falak R Wani