Граф коммитов

14 Коммитов

Автор SHA1 Сообщение Дата
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Eric Biggers c4741b2305 crypto: run initcalls for generic implementations earlier
Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18 22:15:03 +08:00
Herbert Xu c5f5aeef9b Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merge mainline to pick up c7513c2a27 ("crypto/arm64: aes-ce-gcm -
add missing kernel_neon_begin/end pair").
2018-08-03 17:55:12 +08:00
Eric Biggers e50944e219 crypto: shash - remove useless setting of type flags
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH.  But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the shash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:24 +08:00
Dmitry Vyukov f044a84e04 crypto: don't optimize keccakf()
keccakf() is the only function in kernel that uses __optimize() macro.
__optimize() breaks frame pointer unwinder as optimized code uses RBP,
and amusingly this always lead to degraded performance as gcc does not
inline across different optimizations levels, so keccakf() wasn't inlined
into its callers and keccakf_round() wasn't inlined into keccakf().

Drop __optimize() to resolve both problems.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 83dee2ce1a ("crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize")
Reported-by: syzbot+37035ccfa9a0a017ffcf@syzkaller.appspotmail.com
Reported-by: syzbot+e073e4740cfbb3ae200b@syzkaller.appspotmail.com
Cc: linux-crypto@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-15 23:06:48 +08:00
David Howells 739d875dd6 mn10300: Remove the architecture
Remove the MN10300 arch as the hardware is defunct.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Masahiro Yamada <yamada.masahiro@socionext.com>
cc: linux-am33-list@redhat.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-09 23:19:56 +01:00
Geert Uytterhoeven ba916b6a03 crypto: sha3-generic - Use __optimize to support old compilers
With gcc-4.1.2:

    crypto/sha3_generic.c:39: warning: ‘__optimize__’ attribute directive ignored

Use the newly introduced __optimize macro to fix this.

Fixes: 83dee2ce1a ("crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-08 22:38:12 +11:00
Ard Biesheuvel 4767b9ad7d crypto: sha3-generic - deal with oversize stack frames
As reported by kbuild test robot, the optimized SHA3 C implementation
compiles to mn10300 code that uses a disproportionate amount of stack
space, i.e.,

  crypto/sha3_generic.c: In function 'keccakf':
  crypto/sha3_generic.c:147:1: warning: the frame size of 1232 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As kindly diagnosed by Arnd, this does not only occur when building for
the mn10300 architecture (which is what the report was about) but also
for h8300, and builds for other 32-bit architectures show an increase in
stack space utilization as well.

Given that SHA3 operates on 64-bit quantities, and keeps a state matrix
of 25 64-bit words, it is not surprising that 32-bit architectures with
few general purpose registers are impacted the most by this, and it is
therefore reasonable to implement a workaround that distinguishes between
32-bit and 64-bit architectures.

Arnd figured out that taking the round calculation out of the loop, and
inlining it explicitly but only on 64-bit architectures preserves most
of the performance gain achieved by the rewrite, and also gets rid of
the excessive use of stack space.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-08 22:37:08 +11:00
Ard Biesheuvel 6657674b23 crypto: sha3-generic - export init/update/final routines
To allow accelerated implementations to fall back to the generic
routines, e.g., in contexts where a SIMD based implementation is
not allowed to run, expose the generic SHA3 init/update/final
routines to other modules.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26 01:10:34 +11:00
Ard Biesheuvel beeb504adf crypto: sha3-generic - simplify code
In preparation of exposing the generic SHA3 implementation to other
versions as a fallback, simplify the code, and remove an inconsistency
in the output handling (endian swabbing rsizw words of state before
writing the output does not make sense)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26 01:10:33 +11:00
Ard Biesheuvel 83dee2ce1a crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
The way the KECCAK transform is currently coded involves many references
into the state array using indexes that are calculated at runtime using
simple but non-trivial arithmetic. This forces the compiler to treat the
state matrix as an array in memory rather than keep it in registers,
which results in poor performance.

So instead, let's rephrase the algorithm using fixed array indexes only.
This helps the compiler keep the state matrix in registers, resulting
in the following speedup (SHA3-256 performance in cycles per byte):

                                            before   after   speedup
  Intel Core i7 @ 2.0 GHz (2.9 turbo)        100.6    35.7     2.8x
  Cortex-A57 @ 2.0 GHz (64-bit mode)         101.6    12.7     8.0x
  Cortex-A53 @ 1.0 GHz                       224.4    15.8    14.2x
  Cortex-A57 @ 2.0 GHz (32-bit mode)         201.8    63.0     3.2x

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26 01:10:33 +11:00
Ard Biesheuvel c013cee99d crypto: sha3-generic - fixes for alignment and big endian operation
Ensure that the input is byte swabbed before injecting it into the
SHA3 transform. Use the get_unaligned() accessor for this so that
we don't perform unaligned access inadvertently on architectures
that do not support that.

Cc: <stable@vger.kernel.org>
Fixes: 53964b9ee6 ("crypto: sha3 - Add SHA-3 hash algorithm")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26 01:10:32 +11:00
Geert Uytterhoeven f743e70e8f crypto: sha3 - Add missing ULL suffixes for 64-bit constants
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1):

    crypto/sha3_generic.c:27: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:28: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type
    crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type

Fixes: 53964b9ee6 ("crypto: sha3 - Add SHA-3 hash algorithm")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-08 23:43:46 +08:00
Jeff Garzik 53964b9ee6 crypto: sha3 - Add SHA-3 hash algorithm
This patch adds the implementation of SHA3 algorithm
in software and it's based on original implementation
pushed in patch https://lwn.net/Articles/518415/ with
additional changes to match the padding rules specified
in SHA-3 specification.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-20 19:25:01 +08:00