Impact: fix a dynamic tracing failure
Recently, the function and function graph tracers failed to use dynamic
tracing after the following commit:
fa9d13cf13
(ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec)
The patch is right except a mistake on the check for the FTRACE_FL_CONVERTED
flag. The code patching is aborted in case of successfully nopped sites.
What we want is the opposite: ignore the callsites that haven't been nopped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: save memory
The struct dyn_ftrace table is very large, this patch will save
about 50%.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2C9F.8020009@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
VFS layer has tested the file mode, we do not need test it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2BAB.6010608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Do __ftrace_replace_code for !FTRACE_FL_CONVERTED rec will always
fail, we should ignore this rec.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA2472.4060206@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If dyn_ftrace is freed before ftrace_release(), ftrace_release()
will free it again and make ftrace_free_records wrong.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA23D9.1050900@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix deadlock while using set_ftrace_pid
Reproducer:
# cd /sys/kernel/debug/tracing
# echo $$ > set_ftrace_pid
then, console becomes hung.
Details:
when writing set_ftracepid, kernel callstack is following
ftrace_pid_write()
mutex_lock(&ftrace_lock);
ftrace_update_pid_func()
mutex_lock(&ftrace_lock);
mutex_unlock(&ftrace_lock);
mutex_unlock(&ftrace_lock);
then, system always deadlocks when ftrace_pid_write() is called.
In past days, ftrace_pid_write() used ftrace_start_lock, but
commit e6ea44e9b4 consolidated
ftrace_start_lock to ftrace_lock.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <20090306151155.0778.A69D9226@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
All file_operations structures should be constant. No one is going to
change them.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: added precaution on failure detection
Break out of the modifying loop as soon as a failure is detected.
This is just an added precaution found by code review and was not
found by any bug chasing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates the weak functions: ftrace_arch_code_modify_prepare
and ftrace_arch_code_modify_post_process that are called before and
after the stop machine is called to modify the kernel text.
If the arch needs to do pre or post processing, it only needs to define
these functions.
[ Update: Ingo Molnar suggested using the name ftrace_arch_code_modify_*
over using ftrace_arch_modify_* ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: trace only functions matching a pattern
The set_graph_function file let one to trace only one or several
chosen functions and follow all their code flow.
Currently, only a constant function name is allowed so this patch
allows the ftrace_regex functions:
- matches all functions that end with "name":
echo *name > set_graph_function
- matches all functions that begin with "name":
echo name* > set_graph_function
- matches all functions that contains "name":
echo *name* > set_graph_function
Example:
echo mutex* > set_graph_function
0) | mutex_lock_nested() {
0) 0.563 us | __might_sleep();
0) 2.072 us | }
0) | mutex_unlock() {
0) 1.036 us | __mutex_unlock_slowpath();
0) 2.433 us | }
0) | mutex_unlock() {
0) 0.691 us | __mutex_unlock_slowpath();
0) 1.787 us | }
0) | mutex_lock_interruptible_nested() {
0) 0.548 us | __might_sleep();
0) 1.945 us | }
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Ingo Molnar did not like the _hook naming convention used by the
select function tracer. Luis Claudio R. Goncalves suggested using
the "_probe" extension. This patch implements the change of
calling the functions and variables "_hook" and replacing them
with "_probe".
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Ingo Molnar pointed out some coding style issues with the recent ftrace
updates. This patch cleans them up.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds a call back for the tracers that have hooks to
selected functions. This allows the tracer to show better output
in the set_ftrace_filter file.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds output to show what functions have tracer hooks
attached to them.
# echo 'sys_open:traceon:4' > /debug/tracing/set_ftrace_filter
# cat set_ftrace_filter
#### all functions enabled ####
sys_open:ftrace_traceon:0000000000000004
# echo 'do_fork:traceoff:' > set_ftrace_filter
# cat set_ftrace_filter
#### all functions enabled ####
sys_open:ftrace_traceon:0000000000000002
do_fork:ftrace_traceoff:ffffffffffffffff
Note the 4 changed to a 2. This is because The code was executed twice
since the traceoff was added. If a cat is done again:
#### all functions enabled ####
sys_open:ftrace_traceon
do_fork:ftrace_traceoff:ffffffffffffffff
The number disappears. That is because it will not print a NULL.
Callbacks to allow the tracer to pretty print will be implemented soon.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: new feature
Currently, the function tracer only gives you an ability to hook
a tracer to all functions being traced. The dynamic function trace
allows you to pick and choose which of those functions will be
traced, but all functions being traced will call all tracers that
registered with the function tracer.
This patch adds a new feature that allows a tracer to hook to specific
functions, even when all functions are being traced. It allows for
different functions to call different tracer hooks.
The way this is accomplished is by a special function that will hook
to the function tracer and will set up a hash table knowing which
tracer hook to call with which function. This is the most general
and easiest method to accomplish this. Later, an arch may choose
to supply their own method in changing the mcount call of a function
to call a different tracer. But that will be an exercise for the
future.
To register a function:
struct ftrace_hook_ops {
void (*func)(unsigned long ip,
unsigned long parent_ip,
void **data);
int (*callback)(unsigned long ip, void **data);
void (*free)(void **data);
};
int register_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops,
void *data);
glob is a simple glob to search for the functions to hook.
ops is a pointer to the operations (listed below)
data is the default data to be passed to the hook functions when traced
ops:
func is the hook function to call when the functions are traced
callback is a callback function that is called when setting up the hash.
That is, if the tracer needs to do something special for each
function, that is being traced, and wants to give each function
its own data. The address of the entry data is passed to this
callback, so that the callback may wish to update the entry to
whatever it would like.
free is a callback for when the entry is freed. In case the tracer
allocated any data, it is give the chance to free it.
To unregister we have three functions:
void
unregister_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops,
void *data)
This will unregister all hooks that match glob, point to ops, and
have its data matching data. (note, if glob is NULL, blank or '*',
all functions will be tested).
void
unregister_ftrace_function_hook_func(char *glob,
struct ftrace_hook_ops *ops)
This will unregister all functions matching glob that has an entry
pointing to ops.
void unregister_ftrace_function_hook_all(char *glob)
This simply unregisters all funcs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
Now that ftrace_lock is a mutex, there is no reason to have three
different mutexes protecting similar data. All the mutex paths
are not in hot paths, so having a mutex to cover more data is
not a problem.
This patch removes the ftrace_sysctl_lock and ftrace_start_lock
and uses the ftrace_lock to protect the locations that were protected
by these locks. By doing so, this change also removes some of
the lock nesting that was taking place.
There are still more mutexes in ftrace.c that can probably be
consolidated, but they can be dealt with later. We need to be careful
about the way the locks are nested, and by consolidating, we can cause
a recursive deadlock.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
The older versions of ftrace required doing the ftrace list
search under atomic context. Now all the calls are in non-atomic
context. There is no reason to keep the ftrace_lock as a spinlock.
This patch converts it to a mutex.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Allow for other tracers to add their own commands for function
selection. This interface gives a trace the ability to name a
command for function selection. Right now it is pretty limited
in what it offers, but this is a building step for more features.
The :mod: command is converted to this interface and also serves
as a template for other implementations.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to prevent empty set_ftrace_filter and no ftrace output
The function filter is used to only trace a given set of functions.
The filter is enabled when a function name is echoed into the
set_ftrace_filter file. But if the name has a typo and the function
is not found, the filter is enabled, but no function is listed.
This makes a confusing situation where set_ftrace_filter is empty
but no functions ever get enabled for tracing.
For example:
# cat /debug/tracing/set_ftrace_filter
#### all functions enabled ####
# echo bad_name > set_ftrace_filter
# cat /debug/tracing/set_ftrace_filter
# echo function > current_tracer
# cat trace
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
This patch changes that to only enable filtering if a function
is set to be filtered on. Now, the filter is not enabled if
a bad name is echoed into set_ftrace_filter.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds a "command" syntax to the function filtering files:
/debugfs/tracing/set_ftrace_filter
/debugfs/tracing/set_ftrace_notrace
Of the format: <function>:<command>:<parameter>
The command is optional, and dependent on the command, so are
the parameters.
echo do_fork > set_ftrace_filter
Will only trace 'do_fork'.
echo 'sched_*' > set_ftrace_filter
Will only trace functions starting with the letters 'sched_'.
echo '*:mod:ext3' > set_ftrace_filter
Will trace only the ext3 module functions.
echo '*write*:mod:ext3' > set_ftrace_notrace
Will prevent the ext3 functions with the letters 'write' in
the name from being traced.
echo '!*_allocate:mod:ext3' > set_ftrace_filter
Will remove the functions in ext3 that end with the letters
'_allocate' from the ftrace filter.
Although this patch implements the 'command' format, only the
'mod' command is supported. More commands to follow.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
ftrace_match_records does a lot of things that other features
can use. This patch breaks up ftrace_match_records and pulls
out ftrace_setup_glob and ftrace_match_record.
ftrace_setup_glob prepares a simple glob expression for use with
ftrace_match_record. ftrace_match_record compares a single record
with a glob type.
Breaking this up will allow for more features to run on individual
records.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
ftrace_match is too generic of a name. What it really does is
search all records and matches the records with the given string,
and either sets or unsets the functions to be traced depending
on if the parameter 'enable' is set or not.
This allows us to make another function called ftrace_match that
can be used to test a single record.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
To iterate over all the functions that dynamic trace knows about
it requires two for loops. One to iterate over the pages and the
other to iterate over the records within the page.
There are several duplications of these loops in ftrace.c. This
patch creates the macros do_for_each_ftrace_rec and
while_for_each_ftrace_rec to handle this logic, and removes the
duplicate code.
While making this change, I also discovered and fixed a small
bug that one of the iterations should exit the loop after it found the
record it was searching for. This used a break when it should have
used a goto, since there were two loops it needed to break out
from. No real harm was done by this bug since it would only continue
to search the other records, and the code was in a slow path anyway.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up, make set_ftrace_filter less confusing
The set_ftrace_filter shows only the functions that will be traced.
But when it is empty, it will trace all functions. This can be a bit
confusing.
This patch makes set_ftrace_filter show:
#### all functions enabled ####
When all functions will be traced, and we do not filter only a select
few.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
Fixed several typos in the comments.
Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
"ftrace: use struct pid" commit 978f3a45d9
converted ftrace_pid_trace to "struct pid*".
But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix a crash while kernel image restore
When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.
The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).
So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.
This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix a crash while kernel image restore
When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.
The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).
So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.
This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define FTRACE_ADDR. In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'. MCOUNT_ADDR is determined
at link time not compile time, so explictly ignore kernel/trace/ftrace.o
in recordmcount.pl.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix to unsigned compared to less than zero
Roel Kluin pointed out that there is a compare of an unsigned number
to less than zero. A previous clean up had the unsigned index set
to -1 for certain cases, but never converted it to signed.
Frederic Weisbecker noticed that another index is used to compare
the above index to and it also needs to be converted to signed.
[
Converted ftrace_page->index to int from unsigned long as
Andrew Morton pointed out that there's no need for it to
stay a long.
]
Reported-by: Roel Kluin <roel.kluin@gmail.com>
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enhancement
Ingo Molnar has asked about a way to remove items from the filter
lists. Currently, you can only add or replace items. The way
items are added to the list is through opening one of the list
files (set_ftrace_filter or set_ftrace_notrace) via append.
If the file is opened for truncate, the list is cleared.
echo spin_lock > /debug/tracing/set_ftrace_filter
The above will replace the list with only spin_lock
echo spin_lock >> /debug/tracing/set_ftrace_filter
The above will add spin_lock to the list.
Now this patch adds:
echo '!spin_lock' >> /debug/tracing/set_ftrace_filter
This will remove spin_lock from the list.
The limited glob features of these lists also can be notted.
echo '!spin_*' >> /debug/tracing/set_ftrace_filter
This will remove all functions that start with 'spin_'
Note:
echo '!spin_*' > /debug/tracing/set_ftrace_filter
will simply clear out the list (notice the '>' instead of '>>')
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Provide a way to pause the function graph tracer
As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Using (struct pid *)-1 as the pointer for ftrace_swapper_pid is
a little confusing for others. This patch uses the address of the
actual init pid structure instead. This change is only for
clarity. It does not affect the code itself. Hopefully soon the
swapper tasks will all have their own pid structure and then
we can clean up the code a bit more.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix a bug in function filter setting
when writing function to set_graph_function, we should check whether it
has existed in set_graph_function to avoid duplicating.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature
This patch lets the swapper tasks of all CPUS be filtered by the
set_ftrace_pid file.
If '0' is echoed into this file, then all the idle tasks (aka swapper)
is flagged to be traced. This affects all CPU idle tasks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up, extend PID filtering to PID namespaces
Eric Biederman suggested using the struct pid for filtering on
pids in the kernel. This patch is based off of a demonstration
of an implementation that Eric sent me in an email.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: New feature
This patch makes the changes to set_ftrace_pid apply to the function
graph tracer.
# echo $$ > /debugfs/tracing/set_ftrace_pid
# echo function_graph > /debugfs/tracing/current_tracer
Will cause only the current task to be traced. Note, the trace flags are
also inherited by child processes, so the children of the shell
will also be traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Use the new task struct trace flags to determine if a process should be
traced or not.
Note: this moves the searching of the pid to the slow path of setting
the pid field. This needs to be converted to the pid name space.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the file:
/debugfs/tracing/set_graph_function
which can be used along with the function graph tracer.
When this file is empty, the function graph tracer will act as
usual. When the file has a function in it, the function graph
tracer will only trace that function.
For example:
# echo blk_unplug > /debugfs/tracing/set_graph_function
# cat /debugfs/tracing/trace
[...]
------------------------------------------
| 2) make-19003 => kjournald-2219
------------------------------------------
2) | blk_unplug() {
2) | dm_unplug_all() {
2) | dm_get_table() {
2) 1.381 us | _read_lock();
2) 0.911 us | dm_table_get();
2) 1. 76 us | _read_unlock();
2) + 12.912 us | }
2) | dm_table_unplug_all() {
2) | blk_unplug() {
2) 0.778 us | generic_unplug_device();
2) 2.409 us | }
2) 5.992 us | }
2) 0.813 us | dm_table_put();
2) + 29. 90 us | }
2) + 34.532 us | }
You can add up to 32 functions into this file. Currently we limit it
to 32, but this may change with later improvements.
To add another function, use the append '>>':
# echo sys_read >> /debugfs/tracing/set_graph_function
# cat /debugfs/tracing/set_graph_function
blk_unplug
sys_read
Using the '>' will clear out the function and write anew:
# echo sys_write > /debug/tracing/set_graph_function
# cat /debug/tracing/set_graph_function
sys_write
Note, if you have function graph running while doing this, the small
time between clearing it and updating it will cause the graph to
record all functions. This should not be an issue because after
it sets the filter, only those functions will be recorded from then on.
If you need to only record a particular function then set this
file first before starting the function graph tracer. In the future
this side effect may be corrected.
The set_graph_function file is similar to the set_ftrace_filter but
it does not take wild cards nor does it allow for more than one
function to be set with a single write. There is no technical reason why
this is the case, I just do not have the time yet to implement that.
Note, dynamic ftrace must be enabled for this to appear because it
uses the dynamic ftrace records to match the name to the mcount
call sites.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature, let entry function decide to trace or not
This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new ftrace_graph_stop function
While developing more features of function graph, I hit a bug that
caused the WARN_ON to trigger in the prepare_ftrace_return function.
Well, it was hard for me to find out that was happening because the
bug would not print, it would just cause a hard lockup or reboot.
The reason is that it is not safe to call printk from this function.
Looking further, I also found that it calls unregister_ftrace_graph,
which grabs a mutex and calls kstop machine. This would definitely
lock the box up if it were to trigger.
This patch adds a fast and safe ftrace_graph_stop() which will
stop the function tracer. Then it is safe to call the WARN ON.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend and enable the function graph tracer to 64-bit x86
This patch implements the support for function graph tracer under x86-64.
Both static and dynamic tracing are supported.
This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I
wanted to use probe_kernel_read/write to make the return address
saving/patching code more generic but it causes tracing recursion.
That would be perhaps useful to implement a notrace version of these
function for other archs ports.
Note that arch/x86/process_64.c is not traced, as in X86-32. I first
thought __switch_to() was responsible of crashes during tracing because I
believed current task were changed inside but that's actually not the
case (actually yes, but not the "current" pointer).
So I will have to investigate to find the functions that harm here, to
enable tracing of the other functions inside (but there is no issue at
this time, while process_64.c stays out of -pg flags).
A little possible race condition is fixed inside this patch too. When the
tracer allocate a return stack dynamically, the current depth is not
initialized before but after. An interrupt could occur at this time and,
after seeing that the return stack is allocated, the tracer could try to
trace it with a random uninitialized depth. It's a prevention, even if I
hadn't problems with it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix "no output from tracer" bug caused by ftrace_update_pid_func()
When disabling single thread function trace using
"echo -1 > set_ftrace_pid", the normal function trace
has to restore to original function, otherwise the normal
function trace will not work well.
Without this commit, something like below:
$ ps |grep 850
850 root 2556 S -/bin/sh
$ echo 850 > /debug/tracing/set_ftrace_pid
$ echo function > /debug/tracing/current_tracer
$ echo 1 > /debug/tracing/tracing_enabled
$ sleep 1
$ echo 0 > /debug/tracing/tracing_enabled
$ cat /debug/tracing/trace_pipe |wc -l
59704
$ echo -1 > /debug/tracing/set_ftrace_pid
$ echo 1 > /debug/tracing/tracing_enabled
$ sleep 1
$ echo 0 > /debug/tracing/tracing_enabled
$ more /debug/tracing/trace_pipe
<====== nothing output now!
it should output trace record.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make ftrace position computing more sane
First remove useless ->pos field. Then we needn't check seq_printf
in .show like other place.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature
This patch enables function tracing and function return to run together.
I've tested this by enabling the stack tracer and return tracer, where
both the function entry and function return are used together with
dynamic ftrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: more efficient code for ftrace graph tracer
This patch uses the dynamic patching, when available, to patch
the function graph code into the kernel.
This patch will ease the way for letting both function tracing
and function graph tracing run together.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature to function trace a single thread
This patch adds the ability to function trace a single thread.
The file:
/debugfs/tracing/set_ftrace_pid
contains the pid to trace. Valid pids are any positive integer.
Writing any negative number to this file will disable the pid
tracing and the function tracer will go back to tracing all of
threads.
This feature works with both static and dynamic function tracing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature
This patch sets a C-like output for the function graph tracing.
For this aim, we now call two handler for each function: one on the entry
and one other on return. This way we can draw a well-ordered call stack.
The pid of the previous trace is loosely stored to be compared against
the one of the current trace to see if there were a context switch.
Without this little feature, the call tree would seem broken at
some locations.
We could use the sched_tracer to capture these sched_events but this
way of processing is much more simpler.
2 spaces have been chosen for indentation to fit the screen while deep
calls. The time of execution in nanosecs is printed just after closed
braces, it seems more easy this way to find the corresponding function.
If the time was printed as a first column, it would be not so easy to
find the corresponding function if it is called on a deep depth.
I plan to output the return value but on 32 bits CPU, the return value
can be 32 or 64, and its difficult to guess on which case we are.
I don't know what would be the better solution on X86-32: only print
eax (low-part) or even edx (high-part).
Actually it's thee same problem when a function return a 8 bits value, the
high part of eax could contain junk values...
Here is an example of trace:
sys_read() {
fget_light() {
} 526
vfs_read() {
rw_verify_area() {
security_file_permission() {
cap_file_permission() {
} 519
} 1564
} 2640
do_sync_read() {
pipe_read() {
__might_sleep() {
} 511
pipe_wait() {
prepare_to_wait() {
} 760
deactivate_task() {
dequeue_task() {
dequeue_task_fair() {
dequeue_entity() {
update_curr() {
update_min_vruntime() {
} 504
} 1587
clear_buddies() {
} 512
add_cfs_task_weight() {
} 519
update_min_vruntime() {
} 511
} 5602
dequeue_entity() {
update_curr() {
update_min_vruntime() {
} 496
} 1631
clear_buddies() {
} 496
update_min_vruntime() {
} 527
} 4580
hrtick_update() {
hrtick_start_fair() {
} 488
} 1489
} 13700
} 14949
} 16016
msecs_to_jiffies() {
} 496
put_prev_task_fair() {
} 504
pick_next_task_fair() {
} 489
pick_next_task_rt() {
} 496
pick_next_task_fair() {
} 489
pick_next_task_idle() {
} 489
------------8<---------- thread 4 ------------8<----------
finish_task_switch() {
} 1203
do_softirq() {
__do_softirq() {
__local_bh_disable() {
} 669
rcu_process_callbacks() {
__rcu_process_callbacks() {
cpu_quiet() {
rcu_start_batch() {
} 503
} 1647
} 3128
__rcu_process_callbacks() {
} 542
} 5362
_local_bh_enable() {
} 587
} 8880
} 9986
kthread_should_stop() {
} 669
deactivate_task() {
dequeue_task() {
dequeue_task_fair() {
dequeue_entity() {
update_curr() {
calc_delta_mine() {
} 511
update_min_vruntime() {
} 511
} 2813
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use deeper function tracing depth safely
Some tests showed that function return tracing needed a more deeper depth
of function calls. But it could be unsafe to store these return addresses
to the stack.
So these arrays will now be allocated dynamically into task_struct of current
only when the tracer is activated.
Typical scheme when tracer is activated:
- allocate a return stack for each task in global list.
- fork: allocate the return stack for the newly created task
- exit: free return stack of current
- idle init: same as fork
I chose a default depth of 50. I don't have overruns anymore.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make output of available_filter_functions complete
phenomenon:
The first value of dyn_ftrace_total_info is not equal with
`cat available_filter_functions | wc -l`, but they should be equal.
root cause:
When printing functions with seq_printf in t_show, if the read buffer
is just overflowed by current function record, then this function
won't be printed to user space through read buffer, it will
just be dropped. So we can't see this function printing.
So, every time the last function to fill the read buffer, if overflowed,
will be dropped.
This also applies to set_ftrace_filter if set_ftrace_filter has
more bytes than read buffer.
fix:
Through checking return value of seq_printf, if less than 0, we know
this function doesn't be printed. Then we decrease position to force
this function to be printed next time, in next read buffer.
Another little fix is to show correct allocating pages count.
Signed-off-by: walimis <walimisdev@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the support for dynamic tracing on the function return tracer.
The whole difference with normal dynamic function tracing is that we don't need
to hook on a particular callback. The only pro that we want is to nop or set
dynamically the calls to ftrace_caller (which is ftrace_return_caller here).
Some security checks ensure that we are not trying to launch dynamic tracing for
return tracing while normal function tracing is already running.
An example of trace with getnstimeofday set as a filter:
ktime_get_ts+0x22/0x50 -> getnstimeofday (2283 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1396 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1825 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1426 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1524 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1434 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1502 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1404 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1397 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1051 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1314 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1344 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1163 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1390 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1374 ns)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: set filtered functions at time the filter is set
It can be confusing when the set_filter_functions is set (or cleared)
and the functions being recorded by the dynamic tracer does not
match.
This patch causes the code to be updated if the function tracer is
enabled and the filter is changed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: correct implementation of dyn ftrace filter
The old decisions made by the filter algorithm was complex and incorrect.
This lead to inconsistent enabling or disabling of functions when
the filter was used.
This patch simplifies that code and in doing so, corrects the usage
of the filters.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make ftrace_convert_nops() more permissive
Due to the way different architecture linkers combine the data sections
of the mcount_loc (the section that lists all the locations that
call mcount), there may be zeros added in that section. This is usually
due to strange alignments that the linker performs, that pads in zeros.
This patch makes the conversion code to nops skip any pointer in
the mcount_loc section that is NULL.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: allow archs more flexibility on dynamic ftrace implementations
Dynamic ftrace has largly been developed on x86. Since x86 does not
have the same limitations as other architectures, the ftrace interaction
between the generic code and the architecture specific code was not
flexible enough to handle some of the issues that other architectures
have.
Most notably, module trampolines. Due to the limited branch distance
that archs make in calling kernel core code from modules, the module
load code must create a trampoline to jump to what will make the
larger jump into core kernel code.
The problem arises when this happens to a call to mcount. Ftrace checks
all code before modifying it and makes sure the current code is what
it expects. Right now, there is not enough information to handle modifying
module trampolines.
This patch changes the API between generic dynamic ftrace code and
the arch dependent code. There is now two functions for modifying code:
ftrace_make_nop(mod, rec, addr) - convert the code at rec->ip into
a nop, where the original text is calling addr. (mod is the
module struct if called by module init)
ftrace_make_caller(rec, addr) - convert the code rec->ip that should
be a nop into a caller to addr.
The record "rec" now has a new field called "arch" where the architecture
can add any special attributes to each call site record.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: keep from converting freed records
When the tracer is started or stopped, it converts all code pointed
to by the saved records into callers to ftrace or nops. When modules
are unloaded, their records are freed, but they still exist within
the record pages.
This patch changes the code to skip over freed records.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: robust feature to disable ftrace on start or stop tracing on error
Currently only the initial conversion to nops will disable ftrace
on an anomaly. But if an anomaly happens on start or stopping of the
tracer, it will silently fail.
This patch adds a check there too, to disable ftrace and warn if the
conversion fails.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: let module functions be recorded when dyn ftrace not enabled
When dynamic ftrace had a daemon and a hash to record the locations
of mcount callers at run time, the recording needed to stop when
ftrace was disabled. But now that the recording is done at compile time
and the ftrace_record_ip is only called at boot up and when a module
is loaded, we no longer need to check if ftrace_enabled is set.
In fact, this breaks module load if it is not set because we skip
over module functions.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because it has goto out before ftrace_list == &ftrace_list_end,
that's to say, we never meet this condition.
Signed-off-by: walimis <walimisdev@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enable/disable ring buffer recording API added
Several kernel developers have requested that there be a way to stop
recording into the ring buffers with a simple switch that can also
be enabled from userspace. This patch addes a new kernel API to the
ring buffers called:
tracing_on()
tracing_off()
When tracing_off() is called, all ring buffers will not be able to record
into their buffers.
tracing_on() will enable the ring buffers again.
These two act like an on/off switch. That is, there is no counting of the
number of times tracing_off or tracing_on has been called.
A new file is added to the debugfs/tracing directory called
tracing_on
This allows for userspace applications to also flip the switch.
echo 0 > debugfs/tracing/tracing_on
disables the tracing.
echo 1 > /debugfs/tracing/tracing_on
enables it.
Note, this does not disable or enable any tracers. It only sets or clears
a flag that needs to be set in order for the ring buffers to write to
their buffers. It is a global flag, and affects all ring buffers.
The buffers start out with tracing_on enabled.
There are now three flags that control recording into the buffers:
tracing_on: which affects all ring buffer tracers.
buffer->record_disabled: which affects an allocated buffer, which may be set
if an anomaly is detected, and tracing is disabled.
cpu_buffer->record_disabled: which is set by tracing_stop() or if an
anomaly is detected. tracing_start can not reenable this if
an anomaly occurred.
The userspace debugfs/tracing/tracing_enabled is implemented with
tracing_stop() but the user space code can not enable it if the kernel
called tracing_stop().
Userspace can enable the tracing_on even if the kernel disabled it.
It is just a switch used to stop tracing if a condition was hit.
tracing_on is not for protecting critical areas in the kernel nor is
it for stopping tracing if an anomaly occurred. This is because userspace
can reenable it at any time.
Side effect: With this patch, I discovered a dead variable in ftrace.c
called tracing_on. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: add new tracing plugin which can trace full (entry+exit) function calls
This tracer uses the low level function return ftrace plugin to
measure the execution time of the kernel functions.
The first field is the caller of the function, the second is the
measured function, and the last one is the execution time in
nanoseconds.
- v3:
- HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return
should enable it.
- ftrace_return_stub becomes ftrace_stub.
- CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER
- Return traces printing can be used for other tracers on trace.c
- Adapt to the new tracing API (no more ctrl_update callback)
- Correct the check of "disabled" during insertion.
- Minor changes...
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix of output of set_ftrace_filter
Commit ftrace: do not show freed records in available_filter_functions
Removed a bit too much from the set_ftrace_filter code, where we now see
all functions in the set_ftrace_filter file even when we set a filter.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: quick start and stop of function tracer
This patch adds a way to disable the function tracer quickly without
the need to run kstop_machine. It adds a new variable called
function_trace_stop which will stop the calls to functions from mcount
when set. This is just an on/off switch and does not handle recursion
like preempt_disable().
It's main purpose is to help other tracers/debuggers start and stop tracing
fuctions without the need to call kstop_machine.
The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs
that implement the testing of the function_trace_stop in the mcount
arch dependent code. Otherwise, the test is done in the C code.
x86 is the only arch at the moment that supports this.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: corrects a bug which made the non-dyn function tracer not functional
With latest git, the non-dynamic function tracer didn't get any trace.
The problem was the fact that ftrace_enabled wasn't initialized to 1
because ftrace hasn't any init function when DYNAMIC_FTRACE is disabled.
So when a tracer tries to register an ftrace_ops struct,
__register_ftrace_function failed to set the hook.
This patch corrects it by setting an init function to initialize
ftrace during the boot.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
this warning:
kernel/trace/ftrace.c:189: warning: ‘frozen_record_count’ defined but not used
triggers because frozen_record_count is only used in the KCONFIG_MARKERS
case. Move the variable it there.
Alas, this frozen-record facility seems to have little use. The
frozen_record_count variable is not used by anything, nor the flags.
So this section might need a bit of dead-code-removal care as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
kernel/trace/ftrace.c: In function 'ftrace_release':
kernel/trace/ftrace.c:271: error: implicit declaration of function 'ftrace_release_hash'
release_hash is not needed without dftraced.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace hash was used by the ftrace_daemon code. The record ip function
would place the calling address (ip) into the hash. The daemon would later
read the hash and modify that code.
The hash complicates the code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace daemon is complex and error prone. This patch strips it out
of the code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add ftrace warn on to disable ftrace as well as report a warning.
[ Thanks to Andrew Morton for suggesting using the WARN_ON return value ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When an anomaly is detected, we need a way to completely disable
ftrace. Right now we have two functions: ftrace_kill and ftrace_kill_atomic.
The ftrace_kill tries to do it in a "nice" way by converting everything
back to a nop.
The "nice" way is dangerous itself, so this patch removes it and only
has the "atomic" version, which is all that is needed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Have the ftrace_modify_code return error values:
-EFAULT on error of reading the address
-EINVAL if what is read does not match what it expected
-EPERM if the write fails to update after a successful match.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The x86 architecture uses a static recording of mcount caller locations
and is not affected by this patch.
For architectures still using the dynamic ftrace daemon, this patch is
critical. It removes the race between the recording of a function that
calls mcount, the unloading of a module, and the ftrace daemon updating
the call sites.
This patch adds the releasing of the hash functions that the daemon uses
to update the mcount call sites. When a module is unloaded, not only
are the replaced call site table update, but now so is the hash recorded
functions that the ftrace daemon will use.
Again, architectures that implement MCOUNT_RECORD are not affected by
this (which currently only x86 has).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the recent updates to ftrace, there should not be any failures when
modifying the code. If there is, then we need to warn about it.
This patch has a cleaned up version of the code that I used to discover
that the weak symbols were causing failures.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This
patch eliminates that warning.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This must be brown paper bag week for Steven Rostedt!
While working on ftrace for PPC, I discovered that the hash locking done
when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect.
With a cut and paste error, I had the hash lock macro to lock for both
hash_lock _and_ hash_unlock!
This bug did not affect x86 since this bug was introduced when
CONFIG_FTRACE_MCOUNT_RECORD was added to x86.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mcount record method of ftrace scans objdump for references to mcount.
Using mcount as the reference to test if the calls to mcount being replaced
are indeed calls to mcount, this use of mcount was also caught as a
location to change. Using a variable that points to the mcount address
moves this reference into the data section that is not scanned, and
we do not use a false location to try and modify.
The warn on code was what was used to detect this bug.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build
failure surfaced:
kernel/trace/ftrace.c: In function 'ftrace_record_ip':
kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave'
kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave'
Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace:
add necessary locking for ftrace records").
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new design of pre-recorded mcounts and updating the code outside of
kstop_machine has changed the way the records themselves are protected.
This patch uses the ftrace_lock to protect the records. Note, the lock
still does not need to be taken within calls that are only called via
kstop_machine, since the that code can not run while the spin lock is held.
Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is
configured. Also did a slight cleanup of an unused variable.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If one of the self tests of ftrace has disabled the function tracer,
do not run the code to convert the mcount calls in modules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a mcount pointer is recorded into a table, it is used to add or
remove calls to mcount (replacing them with nops). If the code is removed
via removing a module, the pointers still exist. At modifying the code
a check is always made to make sure the code being replaced is the code
expected. In-other-words, the code being replaced is compared to what
it is expected to be before being replaced.
There is a very small chance that the code being replaced just happens
to look like code that calls mcount (very small since the call to mcount
is relative). To remove this chance, this patch adds ftrace_release to
allow module unloading to remove the pointers to mcount within the module.
Another change for init calls is made to not trace calls marked with
__init. The tracing can not be started until after init is done anyway.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Seems that freed records can appear in the available_filter_functions list.
This patch fixes that.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch enables the loading of the __mcount_section of modules and
changing all the callers of mcount into nops.
The modification is done before the init_module function is called, so
again, we do not need to use kstop_machine to make these changes.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is the infrastructure to the converting the mcount call sites
recorded by the __mcount_loc section into nops on boot. It also allows
for using these sites to enable tracing as normal. When the __mcount_loc
section is used, the "ftraced" kernel thread is disabled.
This uses the current infrastructure to record the mcount call sites
as well as convert them to nops. The mcount function is kept as a stub
on boot up and not converted to the ftrace_record_ip function. We use the
ftrace_record_ip to only record from the table.
This patch does not handle modules. That comes with a later patch.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
kernel/trace/ftrace.c:1615: error: 'ftraced_suspend' undeclared (first use in this function)
kernel/trace/ftrace.c:1615: error: (Each undeclared identifier is reported only once
kernel/trace/ftrace.c:1615: error: for each function it appears in.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It has been suggested that I add a way to disable the function tracer
on an oops. This code adds a ftrace_kill_atomic. It is not meant to be
used in normal situations. It will disable the ftrace tracer, but will
not perform the nice shutdown that requires scheduling.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid modifying the mcount call-site if there is a kprobe installed on it.
These records are not marked as failed however. This allowed the filter
rules on them to remain up-to-date. Whenever the kprobe on the corresponding
record is removed, the record gets updated as normal.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Let records identified as being kprobe'd be marked as "frozen". The trouble
with records which have a kprobe installed on their mcount call-site is
that they don't get updated. So if such a function which is currently being
traced gets its tracing disabled due to a new filter rule (or because it
was added to the notrace list) then it won't be updated and continue being
traced. This patch allows scanning of all frozen records during tracing to
check if they should be traced.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Record the address of the mcount call-site. Currently all archs except sparc64
record the address of the instruction following the mcount call-site. Some
general cleanups are entailed. Storing mcount addresses in rec->ip enables
looking them up in the kprobe hash table later on to check if they're kprobe'd.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: davem@davemloft.net
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a fix to give notrace filter rules priority over "set_ftrace_filter"
rules.
This fix ensures that functions which are set to be filtered and are
concurrently marked as "notrace" don't get recorded. As of now, if
a record is marked as FTRACE_FL_FILTER and is enabled, then the notrace
flag is not checked. Tested on x86-32.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Rostedt wrote:
> If we unload a module and reload it, will it ever get converted again?
The intent was always to filter core kernel functions to prevent their freeing.
Here's a fix which should allow re-recording of module call-sites.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Identify functions which had their mcount call-site updates failed. This can
help us track functions which ftrace shouldn't fiddle with, and are thus not
being traced. If there is no race with any external agent which is modifying
the mcount call-site, then this file displays no entries (normal case).
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Prevent freeing of records which cause problems and correspond to function from
core kernel text. A new flag, FTRACE_FL_CONVERTED is used to mark a record
as "converted". All other records are patched lazily to NOPs. Failed records
now also remain on frace_hash table. Each invocation of ftrace_record_ip now
checks whether the traced function has ever been recorded (including past
failures) and doesn't re-record it again.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In dynamic ftrace, the mcount function starts off pointing to a stub
function that just returns.
On start up, the call to the stub is modified to point to a "record_ip"
function. The job of the record_ip function is to add the function to
a pre-allocated hash list. If the function is already there, it simply is
ignored, otherwise it is added to the list.
Later, a ftraced daemon wakes up and calls kstop_machine if any functions
have been recorded, and changes the calls to the recorded functions to
a simple nop. If no functions were recorded, the daemon goes back to sleep.
The daemon wakes up once a second to see if it needs to update any newly
recorded functions into nops. Usually it does not, but if a lot of code
has been executed for the first time in the kernel, the ftraced daemon
will call kstop_machine to update those into nops.
The problem currently is that there's no way to stop the daemon from doing
this, and it can cause unneeded latencies (800us which for some is bothersome).
This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon
is active, reading this will return "enabled\n" and "disabled\n" when the
daemon is not running. To disable the daemon, the user can echo "0" or
"disable" into this file, and "1" or "enable" to re-enable the daemon.
Since the daemon is used to convert the functions into nops to increase
the performance of the system, I also added that anytime something is
written into the ftraced_enabled file, kstop_machine will run if there
are new functions that have been detected that need to be converted.
This way the user can disable the daemon but still be able to control the
conversion of the mcount calls to nops by simply,
"echo 0 > /debugfs/tracing/ftraced_enabled"
when they need to do more conversions.
To see the number of converted functions:
"cat /debugfs/tracing/dyn_ftrace_total_info"
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hi Ingo/Steven,
Ftrace currently maintains an update count which includes false updates,
i.e, updates which failed. If anything, such failures should be tracked
by some separate variable, but this patch provides a minimal fix.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: rostedt@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Hi Steven,
I noticed that concurrent instances of ftrace_record_ip()
have a race between ftrace_hash list traversal during
ftrace_ip_in_hash() (before acquiring ftrace_shutdown_lock)
and ftrace_add_hash(). If it's so then this should fix it.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: rostedt@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
While debugging latencies in the RT kernel, I found that it would be nice
to be able to filter away functions from the trace than just to filter
on functions.
I added a new interface to the debugfs tracing directory called
set_ftrace_notrace
When dynamic frace is enabled, this lets you filter away functions that will
not be recorded in the trace. It is similar to adding 'notrace' to those
functions but by doing it without recompiling the kernel.
Here's how set_ftrace_filter and set_ftrace_notrace interact. Remember, if
set_ftrace_filter is set, it removes all functions from the trace execpt for
those listed in the set_ftrace_filter. set_ftrace_notrace will prevent those
functions from being traced.
If you were to set one function in both set_ftrace_filter and
set_ftrace_notrace and that function was the same, then you would end up
with an empty trace.
the set of functions to trace is:
set_ftrace_filter == empty then
all functions not in set_ftrace_notrace
else
set of the set_ftrace_filter and not in set of set_ftrace_notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
David S. Miller noticed the following bug: the -pg instrumentation
function callback is named differently on each platform. On x86 it
is mcount, on sparc it is _mcount. So the export does not make sense
in kernel/trace/ftrace.c - move it to x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It causes unaligned access traps on platforms like sparc
(ftrace_page may be marked packed, but once we return
a dyn_ftrace sub-object from this array to another piece
of code, the "packed" part of the typing information doesn't
propagate).
But also, it didn't serve any purpose either. Even if packed,
on 64-bit or 32-bit, it didn't give us any more dyn_ftrace
entries per-page.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Due to debug hooks in the kernel that can change the way smp_processor_id
works, use raw_smp_processor_id in mcount called functions (namely
ftrace_record_ip). Currently we annotate most debug functions from calling
mcount, but we should not rely on that to prevent kernel lockups.
This patch uses the raw_smp_processor_id to prevent a recusive crash
that can happen if a debug hook in smp_processor_id calls mcount.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When dynamic ftrace fails and sets itself disabled, the ftraced daemon
will go back to sleep everytime it wakes up. The setting of the
ftraced state to UNINTERRUPTIBLE is skipped in this process, and the
daemon takes up 100% of the CPU. This patch makes sure the ftraced daemon
sets itself to UNINTERRUPTIBLE in that loop.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
now that we have a kbuild method for notrace, no need to pollute the
C code with the annotations.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
PowerPC is very fragile when it comes to use of function names
and function addresses. ftrace needs to either use all function
addresses or function names (i.e. my_func as suppose to &my_func).
This patch chooses to use the names and not the addresses, and
makes ftrace consistent.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since ftrace touches practically every function. If we detect any
anomaly, we want to fully disable ftrace. This patch adds code
to try shutdown ftrace as much as possible without doing any more
harm is something is detected not quite correct.
This only kills ftrace, this patch does have checks for other parts of
the tracer (irqsoff, wakeup, etc.).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The ftrace dynamic function update allocates a record to store the
instruction pointers that are being modified. If the modified
instruction pointer fails to update, then the record is marked as
failed and nothing more is done.
Worse, if the modification fails, but the record ip function is still
called, it will allocate a new record and try again. In just a matter
of time, will this cause a serious memory leak and crash the system.
This patch plugs this memory leak. When a record fails, it is
included back into the pool of records to be used. Now a record may
fail over and over again, but the number of allocated records will
not increase.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a startup self test on dynamic code modification
and filters. The test filters on a specific function, makes sure that
no other function is traced, exectutes the function, then makes sure that
the function is traced.
This patch also fixes a slight bug with the ftrace selftest, where
tracer_enabled was not being set.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds two files to the debugfs system:
/debugfs/tracing/available_filter_functions
and
/debugfs/tracing/set_ftrace_filter
The available_filter_functions lists all functions that has been
recorded by the ftraced that has called the ftrace_record_ip function.
This is to allow users to see what functions have been converted
to nops and can be enabled for tracing.
To enable functions, simply echo the names (whitespace delimited)
into set_ftrace_filter. Simple wildcards are also allowed.
echo 'scheduler' > /debugfs/tracing/set_ftrace_filter
Will have only the scheduler be activated when tracing is enabled.
echo 'sched_*' > /debugfs/tracing/set_ftrace_filter
Will have only the functions starting with 'sched_' be activated.
echo '*lock' > /debugfs/tracing/set_ftrace_filter
Will have only functions ending with 'lock' be activated.
echo '*lock*' > /debugfs/tracing/set_ftrace_filter
Will have only functions with 'lock' in its name be activated.
Note: 'sched*lock' will not work. The only wildcards that are
allowed is an asterisk and the beginning and or end of the string
passed in.
Multiple names can be passed in with whitespace delimited:
echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter
is also the same as:
echo 'scheduler' > /debugfs/tracing/set_ftrace_filter
echo '*lock' >> /debugfs/tracing/set_ftrace_filter
echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter
Appending does just that. It appends to the list.
To disable all filters simply echo an empty line in:
echo > /debugfs/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch replaces the indirect call to the mcount function
pointer with a direct call that will be patched by the
dynamic ftrace routines.
On boot up, the mcount function calls the ftace_stub function.
When the dynamic ftrace code is initialized, the ftrace_stub
is replaced with a call to the ftrace_record_ip, which records
the instruction pointers of the locations that call it.
Later, the ftraced daemon will call kstop_machine and patch all
the locations to nops.
When a ftrace is enabled, the original calls to mcount will now
be set top call ftrace_caller, which will do a direct call
to the registered ftrace function. This direct call is also patched
when the function that should be called is updated.
All patching is performed by a kstop_machine routine to prevent any
type of race conditions that is associated with modifying code
on the fly.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch moves the memory management of the ftrace
records out of the arch code and into the generic code
making the arch code simpler.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds back the sysctl ftrace_enabled. This time it is
defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled
is disabled, the ftrace function is set to the stub return.
If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0,
the registered ftrace functions will all be set to jmps, but no more
new calls to ftrace recording (used to find the ftrace calling sites)
will be called.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.
The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.
Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.
e.g.
call ftrace /* 5 bytes */
is replaced with
jmp 3f /* jmp is 2 bytes and we jump 3 forward */
3:
When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace. When it is disabled,
we replace the code back to the jmp.
Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls. A large batch is allocated at
boot up to get most of the calls there.
Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.
The ftrace routine will then call a registered function if a function
happens to be registered.
[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
so don't blame Arnaldo for all of this ;-) ]
Update:
It is now possible to register more than one ftrace function.
If only one ftrace function is registered, that will be the
function that ftrace calls directly. If more than one function
is registered, then ftrace will call a function that will loop
through the functions to call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Frederic Weisbecker
Lai Jiangshan
Zhaolei
KOSAKI Motohiro
Steven Rostedt
Ingo Molnar
Wenji Huang
Oleg Nesterov
Uwe Kleine-Koenig
Shaohua Li
Liming Wang
Steven Rostedt
walimis
Steven Noonan
Stephen Rothwell
Rusty Russell
Abhishek Sagar
David Miller
Arnaldo Carvalho de Melo