Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Mark Salyzyn 2e2fae99d1 afs: xattr: use scnprintf
sprintf and snprintf are fragile in future maintenance, switch to
using scnprintf to ensure no accidental Use After Free conditions
are introduced.

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
2019-11-21 09:12:17 +00:00
Thomas Gleixner b4d0d230cc treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public licence as published by
  the free software foundation either version 2 of the licence or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 114 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:27:11 +02:00
David Howells a58823ac45 afs: Fix application of status and callback to be under same lock
When applying the status and callback in the response of an operation,
apply them in the same critical section so that there's no race between
checking the callback state and checking status-dependent state (such as
the data version).

Fix this by:

 (1) Allocating a joint {status,callback} record (afs_status_cb) before
     calling the RPC function for each vnode for which the RPC reply
     contains a status or a status plus a callback.  A flag is set in the
     record to indicate if a callback was actually received.

 (2) These records are passed into the RPC functions to be filled in.  The
     afs_decode_status() and yfs_decode_status() functions are removed and
     the cb_lock is no longer taken.

 (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer
     update the vnode.

 (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update
     the vnode.

 (5) vnodes, expected data-version numbers and callback break counters
     (cb_break) no longer need to be passed to the reply delivery
     functions.

     Note that, for the moment, the file locking functions still need
     access to both the call and the vnode at the same time.

 (6) afs_vnode_commit_status() is now given the cb_break value and the
     expected data_version and the task of applying the status and the
     callback to the vnode are now done here.

     This is done under a single taking of vnode->cb_lock.

 (7) afs_pages_written_back() is now called by afs_store_data() rather than
     by the reply delivery function.

     afs_pages_written_back() has been moved to before the call point and
     is now given the first and last page numbers rather than a pointer to
     the call.

 (8) The indicator from YFS.RemoveFile2 as to whether the target file
     actually got removed (status.abort_code == VNOVNODE) rather than
     merely dropping a link is now checked in afs_unlink rather than in
     xdr_decode_YFSFetchStatus().

Supplementary fixes:

 (*) afs_cache_permit() now gets the caller_access mask from the
     afs_status_cb object rather than picking it out of the vnode's status
     record.  afs_fetch_status() returns caller_access through its argument
     list for this purpose also.

 (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather
     than a read lock and now sets the callback inside the same critical
     section.

Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-16 16:25:21 +01:00
David Howells 20b8391fff afs: Make some RPC operations non-interruptible
Make certain RPC operations non-interruptible, including:

 (*) Set attributes
 (*) Store data

     We don't want to get interrupted during a flush on close, flush on
     unlock, writeback or an inode update, leaving us in a state where we
     still need to do the writeback or update.

 (*) Extend lock
 (*) Release lock

     We don't want to get lock extension interrupted as the file locks on
     the server are time-limited.  Interruption during lock release is less
     of an issue since the lock is time-limited, but it's better to
     complete the release to avoid a several-minute wait to recover it.

     *Setting* the lock isn't a problem if it's interrupted since we can
      just return to the user and tell them they were interrupted - at
      which point they can elect to retry.

 (*) Silly unlink

     We want to remove silly unlink files if we can, rather than leaving
     them for the salvager to clear up.

Note that whilst these calls are no longer interruptible, they do have
timeouts on them, so if the server stops responding the call will fail with
something like ETIME or ECONNRESET.

Without this, the following:

	kAFS: Unexpected error from FS.StoreData -512

appears in dmesg when a pending store data gets interrupted and some
processes may just hang.

Additionally, make the code that checks/updates the server record ignore
failure due to interruption if the main call is uninterruptible and if the
server has an address list.  The next op will check it again since the
expiration time on the old list has past.

Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-16 16:25:20 +01:00
David Howells 773e0c4025 afs: Fix afs_xattr_get_yfs() to not try freeing an error value
afs_xattr_get_yfs() tries to free yacl, which may hold an error value (say
if yfs_fs_fetch_opaque_acl() failed and returned an error).

Fix this by allocating yacl up front (since it's a fixed-length struct,
unlike afs_acl) and passing it in to the RPC function.  This also allows
the flags to be placed in the object rather than passing them through to
the RPC function.

Fixes: ae46578b96 ("afs: Get YFS ACLs and information through xattrs")
Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-15 17:35:53 +01:00
David Howells cc1dd5c85c afs: Fix incorrect error handling in afs_xattr_get_acl()
Fix incorrect error handling in afs_xattr_get_acl() where there appears to
be a redundant assignment before return, but in fact the return should be a
goto to the error handling at the end of the function.

Fixes: 260f082bae ("afs: Get an AFS3 ACL as an xattr")
Addresses-Coverity: ("Unused Value")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Joe Perches <joe@perches.com>
2019-05-15 17:35:53 +01:00
David Howells f5e4546347 afs: Implement YFS ACL setting
Implement the setting of YFS ACLs in AFS through the interface of setting
the afs.yfs.acl extended attribute on the file.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-07 16:48:44 +01:00
David Howells ae46578b96 afs: Get YFS ACLs and information through xattrs
The YFS/AuriStor variant of AFS provides more capable ACLs and provides
per-volume ACLs and per-file ACLs as well as per-directory ACLs.  It also
provides some extra information that can be retrieved through four ACLs:

 (1) afs.yfs.acl

     The YFS file ACL (not the same format as afs.acl).

 (2) afs.yfs.vol_acl

     The YFS volume ACL.

 (3) afs.yfs.acl_inherited

     "1" if a file's ACL is inherited from its parent directory, "0"
     otherwise.

 (4) afs.yfs.acl_num_cleaned

     The number of of ACEs removed from the ACL by the server because the
     PT entries were removed from the PTS database (ie. the subject is no
     longer known).

Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-07 16:48:44 +01:00
Joe Gorse b10494af49 afs: implement acl setting
Implements the setting of ACLs in AFS by means of setting the
afs.acl extended attribute on the file.

Signed-off-by: Joe Gorse <jhgorse@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-07 16:48:44 +01:00
David Howells 260f082bae afs: Get an AFS3 ACL as an xattr
Implement an xattr on AFS files called "afs.acl" that retrieves a file's
ACL.  It returns the raw AFS3 ACL from the result of calling FS.FetchACL,
leaving any interpretation to userspace.

Note that whilst YFS servers will respond to FS.FetchACL, this will render
a more-advanced YFS ACL down.  Use "afs.yfs.acl" instead for that.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-07 16:48:44 +01:00
David Howells a2f611a3dc afs: Fix getting the afs.fid xattr
The AFS3 FID is three 32-bit unsigned numbers and is represented as three
up-to-8-hex-digit numbers separated by colons to the afs.fid xattr.
However, with the advent of support for YFS, the FID is now a 64-bit volume
number, a 96-bit vnode/inode number and a 32-bit uniquifier (as before).
Whilst the sprintf in afs_xattr_get_fid() has been partially updated (it
currently ignores the upper 32 bits of the 96-bit vnode number), the size
of the stack-based buffer has not been increased to match, thereby allowing
stack corruption to occur.

Fix this by increasing the buffer size appropriately and conditionally
including the upper part of the vnode number if it is non-zero.  The latter
requires the lower part to be zero-padded if the upper part is non-zero.

Fixes: 3b6492df41 ("afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS")
Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-07 16:48:44 +01:00
David Howells c73aa4102f afs: Fix the afs.cell and afs.volume xattr handlers
Fix the ->get handlers for the afs.cell and afs.volume xattrs to pass the
source data size to memcpy() rather than target buffer size.

Overcopying the source data occasionally causes the kernel to oops.

Fixes: d3e3b7eac8 ("afs: Add metadata xattrs")
Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-07 16:48:44 +01:00
David Howells 3b6492df41 afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
Increase the sizes of the volume ID to 64 bits and the vnode ID (inode
number equivalent) to 96 bits to allow the support of YFS.

This requires the iget comparator to check the vnode->fid rather than i_ino
and i_generation as i_ino is not sufficiently capacious.  It also requires
this data to be placed into the vnode cache key for fscache.

For the moment, just discard the top 32 bits of the vnode ID when returning
it though stat.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24 00:41:08 +01:00
David Howells d2ddc776a4 afs: Overhaul volume and server record caching and fileserver rotation
The current code assumes that volumes and servers are per-cell and are
never shared, but this is not enforced, and, indeed, public cells do exist
that are aliases of each other.  Further, an organisation can, say, set up
a public cell and a private cell with overlapping, but not identical, sets
of servers.  The difference is purely in the database attached to the VL
servers.

The current code will malfunction if it sees a server in two cells as it
assumes global address -> server record mappings and that each server is in
just one cell.

Further, each server may have multiple addresses - and may have addresses
of different families (IPv4 and IPv6, say).

To this end, the following structural changes are made:

 (1) Server record management is overhauled:

     (a) Server records are made independent of cell.  The namespace keeps
     	 track of them, volume records have lists of them and each vnode
     	 has a server on which its callback interest currently resides.

     (b) The cell record no longer keeps a list of servers known to be in
     	 that cell.

     (c) The server records are now kept in a flat list because there's no
     	 single address to sort on.

     (d) Server records are now keyed by their UUID within the namespace.

     (e) The addresses for a server are obtained with the VL.GetAddrsU
     	 rather than with VL.GetEntryByName, using the server's UUID as a
     	 parameter.

     (f) Cached server records are garbage collected after a period of
     	 non-use and are counted out of existence before purging is allowed
     	 to complete.  This protects the work functions against rmmod.

     (g) The servers list is now in /proc/fs/afs/servers.

 (2) Volume record management is overhauled:

     (a) An RCU-replaceable server list is introduced.  This tracks both
     	 servers and their coresponding callback interests.

     (b) The superblock is now keyed on cell record and numeric volume ID.

     (c) The volume record is now tied to the superblock which mounts it,
     	 and is activated when mounted and deactivated when unmounted.
     	 This makes it easier to handle the cache cookie without causing a
     	 double-use in fscache.

     (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU
     	 to get the server UUID list.

     (e) The volume name is updated if it is seen to have changed when the
     	 volume is updated (the update is keyed on the volume ID).

 (3) The vlocation record is got rid of and VLDB records are no longer
     cached.  Sufficient information is stored in the volume record, though
     an update to a volume record is now no longer shared between related
     volumes (volumes come in bundles of three: R/W, R/O and backup).

and the following procedural changes are made:

 (1) The fileserver cursor introduced previously is now fleshed out and
     used to iterate over fileservers and their addresses.

 (2) Volume status is checked during iteration, and the server list is
     replaced if a change is detected.

 (3) Server status is checked during iteration, and the address list is
     replaced if a change is detected.

 (4) The abort code is saved into the address list cursor and -ECONNABORTED
     returned in afs_make_call() if a remote abort happened rather than
     translating the abort into an error message.  This allows actions to
     be taken depending on the abort code more easily.

     (a) If a VMOVED abort is seen then this is handled by rechecking the
     	 volume and restarting the iteration.

     (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is
         handled by sleeping for a short period and retrying and/or trying
         other servers that might serve that volume.  A message is also
         displayed once until the condition has cleared.

     (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the
     	 moment.

     (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to
     	 see if it has been deleted; if not, the fileserver is probably
     	 indicating that the volume couldn't be attached and needs
     	 salvaging.

     (e) If statfs() sees one of these aborts, it does not sleep, but
     	 rather returns an error, so as not to block the umount program.

 (5) The fileserver iteration functions in vnode.c are now merged into
     their callers and more heavily macroised around the cursor.  vnode.c
     is removed.

 (6) Operations on a particular vnode are serialised on that vnode because
     the server will lock that vnode whilst it operates on it, so a second
     op sent will just have to wait.

 (7) Fileservers are probed with FS.GetCapabilities before being used.
     This is where service upgrade will be done.

 (8) A callback interest on a fileserver is set up before an FS operation
     is performed and passed through to afs_make_call() so that it can be
     set on the vnode if the operation returns a callback.  The callback
     interest is passed through to afs_iget() also so that it can be set
     there too.

In general, record updating is done on an as-needed basis when we try to
access servers, volumes or vnodes rather than offloading it to work items
and special threads.

Notes:

 (1) Pre AFS-3.4 servers are no longer supported, though this can be added
     back if necessary (AFS-3.4 was released in 1998).

 (2) VBUSY is retried forever for the moment at intervals of 1s.

 (3) /proc/fs/afs/<cell>/servers no longer exists.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells 989782dcdc afs: Overhaul cell database management
Overhaul the way that the in-kernel AFS client keeps track of cells in the
following manner:

 (1) Cells are now held in an rbtree to make walking them quicker and RCU
     managed (though this is probably overkill).

 (2) Cells now have a manager work item that:

     (A) Looks after fetching and refreshing the VL server list.

     (B) Manages cell record lifetime, including initialising and
     	 destruction.

     (B) Manages cell record caching whereby threads are kept around for a
     	 certain time after last use and then destroyed.

     (C) Manages the FS-Cache index cookie for a cell.  It is not permitted
     	 for a cookie to be in use twice, so we have to be careful to not
     	 allow a new cell record to exist at the same time as an old record
     	 of the same name.

 (3) Each AFS network namespace is given a manager work item that manages
     the cells within it, maintaining a single timer to prod cells into
     updating their DNS records.

     This uses the reduce_timer() facility to make the timer expire at the
     soonest timed event that needs happening.

 (4) When a module is being unloaded, cells and cell managers are now
     counted out using dec_after_work() to make sure the module text is
     pinned until after the data structures have been cleaned up.

 (5) Each cell's VL server list is now protected by a seqlock rather than a
     semaphore.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells d3e3b7eac8 afs: Add metadata xattrs
Add xattrs to allow the user to get/set metadata in lieu of having pioctl()
available.  The following xattrs are now available:

 - "afs.cell"

   The name of the cell in which the vnode's volume resides.

 - "afs.fid"

   The volume ID, vnode ID and vnode uniquifier of the file as three hex
   numbers separated by colons.

 - "afs.volume"

   The name of the volume in which the vnode resides.

For example:

	# getfattr -d -m ".*" /mnt/scratch
	getfattr: Removing leading '/' from absolute path names
	# file: mnt/scratch
	afs.cell="mycell.myorg.org"
	afs.fid="10000b:1:1"
	afs.volume="scratch"

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-09 14:40:12 -07:00