There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/crypto/rockchip/rk3288_crypto.c:351:2-9: line 351 is
redundant because platform_get_irq() already prints an error
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2677
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RK3399 has 2 rk3288 compatible crypto device named crypto0 and
crypto1. The only difference is lack of RSA in crypto1.
We need to add driver support for 2 parallel instance as only one need
to register crypto algorithms.
Then the driver will round robin each request on each device.
For avoiding complexity (device bringup after a TFM is created), PM is
modified to be handled per request.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RK3399 has 3 resets, so the driver to handle multiple resets.
This is done by using devm_reset_control_array_get_exclusive().
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rk_ahash_reg_init() use crypto_info from TFM context, since we will
remove it, let's take if from parameters.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the number of clocks needed for each compatible.
Rockchip's datasheet give maximum frequencies for some clocks, so add
checks for verifying they are within limits. Let's start with rk3288 for
clock frequency check, other will came later.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_info to use must be stored in the request context.
This will help when 2 crypto_info will be available on rk3399.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using the crypto_info from TFM ctx, use the one given as parameter.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using lot of ctx->dev->xx indirections, use an intermediate
variable for rk_crypto_info.
This will help later, when 2 different rk_crypto_info would be used.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch rework the rk_handle_req(), simply removing the
rk_crypto_info parameter.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some functions have still ablk in their name even if there are
not handling ablk_cipher anymore.
So let's rename them.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The rk3328 could be used as-is by the rockchip driver.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes some warning reported by checkpatch
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use read_poll_timeout instead of open coding it.
In the same time, fix indentation of related comment.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rk3328 does not have the same clock names than rk3288, instead of using a complex
clock management, let's use clk_bulk to simplify their handling.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
reset could be handled by PM functions.
We keep the initial reset pulse to be sure the hw is a know device state
after probe.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add runtime PM support for rockchip crypto.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enable to access usage stats for each algorithm.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using a custom type for classify algorithms, let's just use
already defined ones.
And let's made a bit more verbose about what is registered.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now driver have fallback for un-aligned cases, remove all code handling
those cases.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The key should not be set in hardware too much in advance, this will
fail it 2 TFM with different keys generate alternative requests.
The key should be stored and used just before doing cipher operations.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds a fallback for all case hardware cannot handle.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Storing the mode globally does not work if 2 requests are handled in the
same time.
We should store it in a request context.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fix a simple typo on private word.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The clock enable/disable at tfm init/exit is fragile,
if 2 tfm are init in the same time and one is removed just after,
it will leave the hardware uncloked even if a user remains.
Instead simply enable clocks at probe time.
We will do PM later.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_info->dev is not yet set, so use pdev->dev instead.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Interrupt is mandatory so the message should be printed as error.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file algapi.h includes skbuff.h unnecessarily since
all we need is a forward declaration for struct sk_buff. This
patch removes that inclusion.
Unfortunately skbuff.h pulls in a lot of things and drivers over
the years have come to rely on it so this patch adds a lot of
missing inclusions that result from this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kernel Crypto API request output the next IV data to
IV buffer for CBC implementation. So the last block data of
ciphertext should be copid into assigned IV buffer.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
It also removes a couple of unnecessary key length checks that
are already performed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously
updated in the operation. The new iv value should be written to device
register by software.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases, the nents of src scatterlist is different from
dst scatterlist. So two variables are used to handle the nents
of src&dst scatterlist.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it
sounds like it is requesting a weak key. Actually, it is requesting
that weak keys be forbidden (for algorithms that have the notion of
"weak keys"; currently only DES and XTS do).
Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which
it can be easily confused. (This in fact happened in the UX500 driver,
though just in some debugging messages.)
Therefore, make the intent clear by renaming it to
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device can only process one request at a time. So if multiple
requests came at the same time, we can enqueue them first, and
dequeue them one by one when the device is idle.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sometime we would unable to dequeue the crypto request, in this case,
we should finish crypto and return the err code.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's illegal to call the completion function from hardirq context,
it will cause runtime tests to fail. Let's build a new task (done_task)
for moving update operation from hardirq context.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup function
has been already called by the helper if there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add md5 sha1 sha256 support for crypto engine in rk3288.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lockdep warns about a possible deadlock resulting from the use of regular
spin_locks:
=================================
[ INFO: inconsistent lock state ]
4.4.0-rc2+ #2724 Not tainted
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/0/3 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&(&crypto_info->lock)->rlock){+.?...}, at: [<bf14a65c>] rk_crypto_tasklet_cb+0x24/0xb4 [rk_crypto]
{SOFTIRQ-ON-W} state was registered at:
[<c007f4ac>] lock_acquire+0x178/0x218
[<c0759bac>] _raw_spin_lock+0x54/0x64
[<bf14af88>] rk_handle_req+0x7c/0xbc [rk_crypto]
[<bf14b040>] rk_des_ecb_encrypt+0x2c/0x30 [rk_crypto]
[<bf14b05c>] rk_aes_ecb_encrypt+0x18/0x1c [rk_crypto]
[<c028c820>] skcipher_encrypt_ablkcipher+0x64/0x68
[<c0290770>] __test_skcipher+0x2a8/0x8dc
[<c0292e94>] test_skcipher+0x38/0xc4
[<c0292fb0>] alg_test_skcipher+0x90/0xb0
[<c0292158>] alg_test+0x1e8/0x280
[<c028f6f4>] cryptomgr_test+0x34/0x54
[<c004bbe8>] kthread+0xf4/0x10c
[<c0010010>] ret_from_fork+0x14/0x24
irq event stamp: 10672
hardirqs last enabled at (10672): [<c002fac8>] tasklet_action+0x48/0x104
hardirqs last disabled at (10671): [<c002faa0>] tasklet_action+0x20/0x104
softirqs last enabled at (10658): [<c002ef84>] __do_softirq+0x358/0x49c
softirqs last disabled at (10669): [<c002f108>] run_ksoftirqd+0x40/0x80
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&crypto_info->lock)->rlock);
<Interrupt>
lock(&(&crypto_info->lock)->rlock);
*** DEADLOCK ***
Fix this by moving to irq-disabling spinlocks.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Yang Li
Corentin Labbe
Kai Ye
Eric Biggers
Herbert Xu
Ard Biesheuvel
Ard Biesheuvel
YueHaibing
Thomas Gleixner
Zhang Zhijie
Greg Kroah-Hartman
Zain Wang
Sudip Mukherjee
Zain Wang
Heiko Stuebner