io-wq relies on a manager thread to create/fork new workers, as needed.
But there's really no strong need for it anymore. We have the following
cases that fork a new worker:
1) Work queue. This is done from the task itself always, and it's trivial
to create a worker off that path, if needed.
2) All workers have gone to sleep, and we have more work. This is called
off the sched out path. For this case, use a task_work items to queue
a fork-worker operation.
3) Hashed work completion. Don't think we need to do anything off this
case. If need be, it could just use approach 2 as well.
Part of this change is incrementing the running worker count before the
fork, to avoid cases where we observe we need a worker and then queue
creation of one. Then new work comes in, we fork a new one. That last
queue operation should have waited for the previous worker to come up,
it's quite possible we don't even need it. Hence move the worker running
from before we fork it off to more efficiently handle that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we go async with a request, grab the creds that the task currently has
assigned and make sure that the async side switches to them. This is
handled in the same way that we do for registered personalities.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we move it in there, then we no longer have to care about it in io-wq.
This means we can drop the cred handling in io-wq, and we can drop the
REQ_F_WORK_INITIALIZED flag and async init functions as that was the last
user of it since we moved to the new workers. Then we can also drop
io_wq_work->creds, and just hold the personality u16 in there instead.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we put the io-wq from io_uring, we really want it to exit. Provide
a helper that does that for us. Couple that with not having the manager
hold a reference to the 'wq' and the normal SQPOLL exit will tear down
the io-wq context appropriate.
On the io-wq side, our wq context is per task, so only the task itself
is manipulating ->manager and hence it's safe to check and clear without
any extra locking. We just need to ensure that the manager task stays
around, in case it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
exec will cancel any threads, including the ones that io-wq is using. This
isn't a problem, in fact we'd prefer it to be that way since it means we
know that any async work cancels naturally without having to handle it
proactively.
But it does mean that we need to setup a new manager, as the manager and
workers are gone. Handle this at queue time, and cancel work if we fail.
Since the manager can go away without us noticing, ensure that the manager
itself holds a reference to the 'wq' as well. Rename io_wq_destroy() to
io_wq_put() to reflect that.
In the future we can now simplify exec cancelation handling, for now just
leave it the same.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before the io-wq thread change, we maintained a hash work map and lock
per-node per-ring. That wasn't ideal, as we really wanted it to be per
ring. But now that we have per-task workers, the hash map ends up being
just per-task. That'll work just fine for the normal case of having
one task use a ring, but if you share the ring between tasks, then it's
considerably worse than it was before.
Make the hash map per ctx instead, which provides full per-ctx buffered
write serialization on hashed writes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're now just using fork like we would from userspace, so there's no
need to try and impose extra restrictions or accounting on the user
side of things. That's already being done for us. That also means we
don't have to pass in the user_struct anymore, that's correctly inherited
through ->creds on fork.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We want to use this in io_uring proper as well, for the SQPOLL thread.
Rename it from fork_thread() to io_wq_fork_thread(), and make it
available through the io-wq.h header.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The async workers are siblings of the task itself, so by definition we
have all the state that we need. Remove any of the state grabbing that
we have, and requests flagging what they need.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using regular kthread kernel threads, create kernel threads
that are like a real thread that the task would create. This ensures that
we get all the context that we need, without having to carry that state
around. This greatly reduces the code complexity, and the risk of missing
state for a given request type.
With the move away from kthread, we can also dump everything related to
assigned state to the new threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't support attach anymore, so doesn't make sense to carry the
use_refs reference count. Get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hit this case when the task is exiting, and we need somewhere to
do background cleanup of requests. Instead of relying on the io-wq
task manager to do this work for us, just stuff it somewhere where
we can safely run it ourselves directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_work is a LIFO list, due to how it's implemented as a lockless
list. For long chains of task_work, this can be problematic as the
first entry added is the last one processed. Similarly, we'd waste
a lot of CPU cycles reversing this list.
Wrap the task_work so we have a single task_work entry per task per
ctx, and use that to run it in the right order.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Saving one lock/unlock for io-wq is not super important, but adds some
ugliness in the code. More important, atomic decs not turning it to zero
for some archs won't give the right ordering/barriers so the
io_steal_work() may pretty easily get subtly and completely broken.
Return back 2-step io-wq work exchange and clean it up.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring no longer issues full cancelations on the io-wq, so remove any
remnants of this code and the IO_WQ_BIT_CANCEL flag.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the first time a req punted to io-wq, we'll initialize io_wq_work's
list to be NULL, then insert req to io_wqe->work_list. If this req is not
inserted into tail of io_wqe->work_list, this req's io_wq_work list will
point to another req's io_wq_work. For splitted bio case, this req maybe
inserted to io_wqe->work_list repeatedly, once we insert it to tail of
io_wqe->work_list for the second time, now io_wq_work->list->next will be
invalid pointer, which then result in many strang error, panic, kernel
soft-lockup, rcu stall, etc.
In my vm, kernel doest not have commit cc29e1bf0d ("block: disable
iopoll for split bio"), below fio job can reproduce this bug steadily:
[global]
name=iouring-sqpoll-iopoll-1
ioengine=io_uring
iodepth=128
numjobs=1
thread
rw=randread
direct=1
registerfiles=1
hipri=1
bs=4m
size=100M
runtime=120
time_based
group_reporting
randrepeat=0
[device]
directory=/home/feiman.wxg/mntpoint/ # an ext4 mount point
If we have commit cc29e1bf0d ("block: disable iopoll for split bio"),
there will no splitted bio case for polled io, but I think we still to need
to fix this list corruption, it also should maybe go to stable branchs.
To fix this corruption, if a req is inserted into tail of io_wqe->work_list,
initialize req->io_wq_work->list->next to bu NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of iterating over each request and cancelling it individually in
io_uring_cancel_files(), try to cancel all matching requests and use
->inflight_list only to check if there anything left.
In many cases it should be faster, and we can reuse a lot of code from
task cancellation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This one was missed in the earlier conversion, should be included like
any of the other IO identity flags. Make sure we restore to RLIM_INIFITY
when dropping the personality again.
Fixes: 98447d65b4 ("io_uring: move io identity items into separate struct")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq contains a pointer to the identity, which we just hold in io_kiocb
for now. This is in preparation for putting this outside io_kiocb. The
only exception is struct files_struct, which we'll need different rules
for to avoid a circular dependency.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a number of bits that decide what context to inherit. Set up
io-wq flags for these instead. This is in preparation for always having
the various members set, but not always needing them for all requests.
No intended functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few operations that are offloaded to the worker threads. In
this case, we lose process context and end up in kthread context. This
results in ios to be not accounted to the issuing cgroup and
consequently end up as issued by root. Just like others, adopt the
personality of the blkcg too when issuing via the workqueues.
For the SQPOLL thread, it will live and attach in the inited cgroup's
context.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we don't get and assign the namespace for the async work, then certain
paths just don't work properly (like /dev/stdin, /proc/mounts, etc).
Anything that references the current namespace of the given task should
be assigned for async work on behalf of that task.
Cc: stable@vger.kernel.org # v5.5+
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
RLIMIT_SIZE in needed only for execution from an io-wq context, hence
move all preparations from hot path to io-wq work setup.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's easier to return next work from ->do_work() than
having an in-out argument. Looks nicer and easier to compile.
Also, merge io_wq_assign_next() into its only user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For an exiting process it tries to cancel all its inflight requests. Use
req->task to match such instead of work.pid. We always have req->task
set, and it will be valid because we're matching only current exiting
task.
Also, remove work.pid and everything related, it's useless now.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a process is going away, io_uring_flush() will cancel only 1
request with a matching pid. Cancel all of them
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for cancelling all io-wq works matching a predicate.
It isn't used yet, so no change in observable behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If requests can be submitted and completed inline, we don't need to
initialize whole io_wq_work in io_init_req(), which is an expensive
operation, add a new 'REQ_F_WORK_INITIALIZED' to determine whether
io_wq_work is initialized and add a helper io_req_init_async(), users
must call io_req_init_async() for the first time touching any members
of io_wq_work.
I use /dev/nullb0 to evaluate performance improvement in my physical
machine:
modprobe null_blk nr_devices=1 completion_nsec=0
sudo taskset -c 60 fio -name=fiotest -filename=/dev/nullb0 -iodepth=128
-thread -rw=read -ioengine=io_uring -direct=1 -bs=4k -size=100G -numjobs=1
-time_based -runtime=120
before this patch:
Run status group 0 (all jobs):
READ: bw=724MiB/s (759MB/s), 724MiB/s-724MiB/s (759MB/s-759MB/s),
io=84.8GiB (91.1GB), run=120001-120001msec
With this patch:
Run status group 0 (all jobs):
READ: bw=761MiB/s (798MB/s), 761MiB/s-761MiB/s (798MB/s-798MB/s),
io=89.2GiB (95.8GB), run=120001-120001msec
About 5% improvement.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring is the only user of io-wq, and now it uses only io-wq callback
for all its requests, namely io_wq_submit_work(). Instead of storing
work->runner callback in each instance of io_wq_work, keep it in io-wq
itself.
pros:
- reduces io_wq_work size
- more robust -- ->func won't be invalidated with mem{cpy,set}(req)
- helps other work
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the original task is (or has) exited, then the task work will not get
queued properly. Allow for using the io-wq manager task to queue this
work for execution, and ensure that the io-wq manager notices and runs
this work if woken up (or exiting).
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We always punt async buffered writes to an io-wq helper, as the core
kernel does not have IOCB_NOWAIT support for that. Most buffered async
writes complete very quickly, as it's just a copy operation. This means
that doing multiple locking roundtrips on the shared wqe lock for each
buffered write is wasteful. Additionally, buffered writes are hashed
work items, which means that any buffered write to a given file is
serialized.
Keep identicaly hashed work items contiguously in @wqe->work_list, and
track a tail for each hash bucket. On dequeue of a hashed item, splice
all of the same hash in one go using the tracked tail. Until the batch
is done, the caller doesn't have to synchronize with the wqe or worker
locks again.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
work->data and work->list are shared in union. io_wq_assign_next() sets
->data if a req having a linked_timeout, but then io-wq may want to use
work->list, e.g. to do re-enqueue of a request, so corrupting ->data.
->data is not necessary, just remove it and extract linked_timeout
through @link_list.
Fixes: 60cf46ae60 ("io-wq: hash dependent work")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a preparation patch removing io_wq_enqueue_hashed(), which
now should be done by io_wq_hash_work() + io_wq_enqueue().
Also, set hash value for dependant works, and do it as late as possible,
because req->file can be unavailable before. This hash will be ignored
by io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First it changes io-wq interfaces. It replaces {get,put}_work() with
free_work(), which guaranteed to be called exactly once. It also enforces
free_work() callback to be non-NULL.
io_uring follows the changes and instead of putting a submission reference
in io_put_req_async_completion(), it will be done in io_free_work(). As
removes io_get_work() with corresponding refcount_inc(), the ref balance
is maintained.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IO_WQ_WORK_CB is used only for linked timeouts, which will be armed
before the work setup (i.e. mm, override creds, etc). The setup
shouldn't take long, so it's ok to arm it a bit later and get rid
of IO_WQ_WORK_CB.
Make io-wq call work->func() only once, callbacks will handle the rest.
i.e. the linked timeout handler will do the actual issue. And as a
bonus, it removes an extra indirect call.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_wq_flush() is buggy, during cancelation of a flush, the associated
work may be passed to the caller's (i.e. io_uring) @match callback. That
callback is expecting it to be embedded in struct io_kiocb. Cancelation
of internal work probably doesn't make a lot of sense to begin with.
As the flush helper is no longer used, just delete it and the associated
work flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->task_pid for exit cancellation, but we need to ensure it's
cleared to zero for io_req_work_grab_env() to do the right thing. Take
a suggestion from Bart and clear the whole thing, just setting the
function passed in. This makes it more future proof as well.
Fixes: 36282881a7 ("io-wq: add io_wq_cancel_pid() to cancel based on a specific pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper that allows the caller to cancel work based on what mm
it belongs to. This allows io_uring to cancel work from a given
task or thread when it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some work items need this for relative path lookup, make it available
like the other inherited credentials/mm/etc.
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're not consistent in how the file table is grabbed and assigned if we
have a command linked that requires the use of it.
Add ->file_table to the io_op_defs[] array, and use that to determine
when to grab the table instead of having the handlers set it if they
need to defer. This also means we can kill the IO_WQ_WORK_NEEDS_FILES
flag. We always initialize work->files, so io-wq can just check for
that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export a helper to attach to an existing io-wq, rather than setting up
a new one. This is doable now that we have reference counted io_wq's.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently setup the io_wq with a static set of mm and creds. Even for
a single-use io-wq per io_uring, this is suboptimal as we have may have
multiple enters of the ring. For sharing the io-wq backend, it doesn't
work at all.
Switch to passing in the creds and mm when the work item is setup. This
means that async work is no longer deferred to the io_uring mm and creds,
it is done with the current mm and creds.
Flag this behavior with IORING_FEAT_CUR_PERSONALITY, so applications know
they can rely on the current personality (mm and creds) being the same
for direct issue and async issue.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq assumes that work will complete fast (and not block), so it
doesn't create a new worker when work is enqueued, if we already have
at least one worker running. This is done on the assumption that if work
is running, then it will complete fast.
Add an option to force io-wq to fork a new worker for work queued. This
is signaled by setting IO_WQ_WORK_CONCURRENT on the work item. For that
case, io-wq will create a new worker, even though workers are already
running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not all work can be cancelled, some of it we may need to guarantee
that it runs to completion. Allow the caller to set IO_WQ_WORK_NO_CANCEL
on work that must not be cancelled. Note that the caller work function
must also check for IO_WQ_WORK_NO_CANCEL on work that is marked
IO_WQ_WORK_CANCEL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe
Stefan Metzmacher
Pavel Begunkov
Xiaoguang Wang
Dennis Zhou