[ Upstream commit bcd9773431 ]
Scheduling a delack in mptcp_established_options_mp() is
not a good idea: such function is called by tcp_send_ack() and
the pending delayed ack will be cleared shortly after by the
tcp_event_ack_sent() call in __tcp_transmit_skb().
Instead use the mptcp delegated action infrastructure to
schedule the delayed ack after the current bh processing completes.
Additionally moves the schedule_3rdack_retransmission() helper
into protocol.c to avoid making it visible in a different compilation
unit.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee50e67ba0 ]
To compute the rtx timeout schedule_3rdack_retransmission() does multiple
things in the wrong way: srtt_us is measured in usec/8 and the timeout
itself is an absolute value.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d199e4363 ]
When recovering after a link failure, snd_nxt should not be set to a
lower value. Else, update of snd_nxt is broken because:
msk->snd_nxt += ret; (where ret is number of bytes sent)
assumes that snd_nxt always moves forward.
After reduction, its possible that snd_nxt update gets out of sync:
dfrag we just sent might have had a data sequence number even past
recovery_snd_nxt.
This change factors the common msk state update to a helper
and updates snd_nxt based on the current dfrag data sequence number.
The conditional is required for the recovery phase where we may
re-transmit old dfrags that are before current snd_nxt.
After this change, snd_nxt only moves forward and covers all in-sequence
data that was transmitted.
recovery_snd_nxt is retained to detect when recovery has completed.
Fixes: 1e1d9d6f11 ("mptcp: handle pending data on closed subflow")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.
Fixes: d7b2690837 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233
Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e.
using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that
matches the endpoint address. There is no reason for that, so we can just
ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints
can reconfigure their 'backup' flag even if no MPTCP sockets are open (or
more generally, in case the MP_PRIO message is not sent out).
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_token_get_sock() may return a mptcp socket that is in
a different net namespace than the socket that received the token value.
The mptcp syncookie code path had an explicit check for this,
this moves the test into mptcp_token_get_sock() function.
Eventually token.c should be converted to pernet storage, but
such change is not suitable for net tree.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian noted that if mptcp_alloc_tx_skb() allocation fails
in __mptcp_push_pending(), we can end-up invoking
mptcp_push_release()/tcp_push() with a zero mss, causing
a divide by 0 error.
This change addresses the issue refactoring the skb allocation
code checking if skb collapsing will happen for sure and doing
the skb allocation only after such check. Skb allocation will
now happen only after the call to tcp_send_mss() which
correctly initializes mss_now.
As side bonuses we now fill the skb tx cache only when needed,
and this also clean-up a bit the output path.
v1 -> v2:
- use lockdep_assert_held_once() - Jakub
- fix indentation - Jakub
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 724cfd2ee8 ("mptcp: allocate TX skbs in msk context")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following coccicheck warning:
./net/mptcp/protocol.h:36:50-73: duplicated argument to & or |
The OPTION_MPTCP_MPJ_SYNACK here is duplicate.
Here should be OPTION_MPTCP_MPJ_ACK.
Fixes: 74c7dfbee3 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian noted the locking schema used by __mptcp_push_pending()
is hard to follow, let's add some more descriptive comments
and drop an unneeded and confusing check.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most MPTCP packets carries a single MPTCP subption: the
DSS containing the mapping for the current packet.
Check explicitly for the above, so that is such scenario we
replace most conditional statements with a single likely() one.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes input options processing more consistent with
output ones and will simplify the next patch.
Also avoid clearing the suboption field after processing
it, since it's not needed.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reorder the mptcp_options_received fields
to shrink the structure a bit and to ensure the most
frequently used fields are all in the first cacheline.
Sub-opt specific flags are moved out of the suboptions area,
and we must now explicitly set them when the relevant
suboption is parsed.
There is a notable exception: 'csum_reqd' is used by both DSS
and MPC suboptions, and keeping such field in the suboptions
flag area will simplfy the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should be set only if the ingress packets present it, otherwise
we can confuse csum validation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the mibs for MP_FAIL: MPTCP_MIB_MPFAILTX and
MPTCP_MIB_MPFAILRX.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a bad checksum is detected, set the send_mp_fail flag to send out
the MP_FAIL option.
Add a new function mptcp_has_another_subflow() to check whether there's
only a single subflow.
When multiple subflows are in use, close the affected subflow with a RST
that includes an MP_FAIL option and discard the data with the bad
checksum.
Set the sk_state of the subsocket to TCP_CLOSE, then the flag
MPTCP_WORK_CLOSE_SUBFLOW will be set in subflow_sched_work_if_closed,
and the subflow will be closed.
When a single subfow is in use, temporarily handled by sending MP_FAIL
with a RST too.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added handling for receiving MP_FAIL suboption.
Add a new members mp_fail and fail_seq in struct mptcp_options_received.
When MP_FAIL suboption is received, set mp_fail to 1 and save the sequence
number to fail_seq.
Then invoke mptcp_pm_mp_fail_received to deal with the MP_FAIL suboption.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the MP_FAIL suboption sending support.
Add a new flag named send_mp_fail in struct mptcp_subflow_context. If
this flag is set, send out MP_FAIL suboption.
Add a new member fail_seq in struct mptcp_out_options to save the data
sequence number to put into the MP_FAIL suboption.
An MP_FAIL option could be included in a RST or on the subflow-level
ACK.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we have several protocol constraints on MPTCP options
generation (e.g. MPC and MPJ subopt are mutually exclusive)
and some additional ones required by our implementation
(e.g. almost all ADD_ADDR variant are mutually exclusive with
everything else).
We can leverage the above to optimize the out option generation:
we check DSS/MPC/MPJ presence in a mutually exclusive way,
avoiding many unneeded conditionals in the common cases.
Additionally extend the existing constraints on ADD_ADDR opt on
all subvariants, so that it becomes fully mutually exclusive with
the above and we can skip another conditional statement for the
common case.
This change is also needed by the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORT are not necessary, we can get
these info from pm.local or pm.remote.
Drop mptcp_pm_should_add_signal_ipv6 and mptcp_pm_should_add_signal_port
too.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the MPTCP_ADD_ADDR_SIGNAL or MPTCP_ADD_ADDR_ECHO flag, build
the ADD_ADDR/ADD_ADDR_ECHO option.
In mptcp_pm_add_addr_signal(), use opts->addr to save the announced
ADD_ADDR or ADD_ADDR_ECHO address.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ADD_ADDR shares pm.addr_signal with RM_ADDR, so after RM_ADDR/ADD_ADDR
has done, we should not clean ADD_ADDR/RM_ADDR's addr_signal.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use MPTCP_ADD_ADDR_SIGNAL only for the action of sending ADD_ADDR, and
use MPTCP_ADD_ADDR_ECHO only for the action of sending ADD_ADDR echo.
Use msk->pm.local to save the announced ADD_ADDR address only, and reuse
msk->pm.remote to save the announced ADD_ADDR_ECHO address.
To prepare for the next patch.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the drop_other_suboptions check from
mptcp_established_options_add_addr() into mptcp_pm_add_addr_signal(), do
it under the PM lock to avoid the race between this check and
mptcp_pm_add_addr_signal().
For this, added a new parameter for mptcp_pm_add_addr_signal() to get
the drop_other_suboptions value. And drop the other suboptions after the
option length check if drop_other_suboptions is true.
Additionally, always drop the other suboption for TCP pure ack:
that makes both the code simpler and the MPTCP behaviour more
consistent.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.
It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.
But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of
all local address corresponding to the fullmesh endpoint. If such array
is empty, keep the current behavior.
Elsewhere loop on such array and create a subflow for each local address
towards the given remote address
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added and managed a new per endpoint flag, named
MPTCP_PM_ADDR_FLAG_FULLMESH.
In mptcp_pm_create_subflow_or_signal_addr(), if such flag is set, instead
of:
remote_address((struct sock_common *)sk, &remote);
fill a temporary allocated array of all known remote address. After
releaseing the pm lock loop on such array and create a subflow for each
remote address from the given local.
Note that the we could still use an array even for non 'fullmesh'
endpoint: with a single entry corresponding to the primary MPC subflow
remote address.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper mptcp_pm_get_flags_and_ifindex_by_id(),
and used it in __mptcp_subflow_connect() to get the flags and ifindex
values.
Then the two arguments flags and ifindex of __mptcp_subflow_connect()
can be dropped.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the parsed incoming backup flag is not propagated
to the subflow itself, the client may end-up using it
to send data.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/191
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows monitoring exceptional events like
active backup scenarios.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk can use backup subflows to transmit in-sequence data
only if there are no other active subflow. On active backup
scenario, the MPTCP connection can do forward progress only
due to MPTCP retransmissions - rtx can pick backup subflows.
This patch introduces a new flag flow MPTCP subflows: if the
underlying TCP connection made no progresses for long time,
and there are other less problematic subflows available, the
given subflow become stale.
Stale subflows are not considered active: if all non backup
subflows become stale, the MPTCP scheduler can pick backup
subflows for plain transmissions.
Stale subflows can return in active state, as soon as any reply
from the peer is observed.
Active backup scenarios can now leverage the available b/w
with no restrinction.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder the data in mptcp_pernet to avoid wasting space
with no reasons and constify the access helpers.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PM can close active subflow, e.g. due to ingress RM_ADDR
option. Such subflow could carry data still unacked at the
MPTCP-level, both in the write and the rtx_queue, which has
never reached the other peer.
Currently the mptcp-level retransmission will deliver such data,
but at a very low rate (at most 1 DSM for each MPTCP rtx interval).
We can speed-up the recovery a lot, moving all the unacked in the
tcp write_queue, so that it will be pushed again via other
subflows, at the speed allowed by them.
Also make available the new helper for later patches.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp re-inject strategy is very aggressive,
we have mptcp-level retransmissions even on single subflow
connection, if the link in-use is lossy.
Let's be a little more conservative: we do retransmit
only if at least a subflow has write and rtx queue empty.
Additionally use the backup subflows only if the active
subflows are stale - no progresses in at least an rtx period
and ignore stale subflows for rtx timeout update
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Maxim, we have a lot of MPTCP-level
retransmissions when multilple links with different latencies
are in use.
This patch refactor the mptcp-level timeout accounting so that
the maximum of all the active subflow timeout is used. To avoid
traversing the subflow list multiple times, the update is
performed inside the packet scheduler.
Additionally clean-up a bit timeout handling.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_rcu() had been removed from pm_netlink.c, so this rcu field in
struct mptcp_pm_addr_entry became useless. Let's drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210802231914.54709-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast()
instead of netlink_unicast(), this looks more concise.
v2: remove the change in netfilter.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 879526030c ("mptcp: protect the rx path with
the msk socket spinlock") the rmem currently used by a given
msk is really sk_rmem_alloc - rmem_released.
The safety check in mptcp_data_ready() does not take the above
in due account, as a result legit incoming data is kept in
subflow receive queue with no reason, delaying or blocking
MPTCP-level ack generation.
This change addresses the issue introducing a new helper to fetch
the rmem memory and using it as needed. Additionally add a MIB
counter for the exceptional event described above - the peer is
misbehaving.
Finally, introduce the required annotation when rmem_released is
updated.
Fixes: 879526030c ("mptcp: protect the rx path with the msk socket spinlock")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/211
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If check_fully_established() causes a subflow reset, it should not
continue to process the packet in tcp_data_queue().
Add a return value to mptcp_incoming_options(), and return false if a
subflow has been reset, else return true. Then drop the packet in
tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options()
return false.
Fixes: d582484726 ("mptcp: fix fallback for MP_JOIN subflows")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lots of "TCP: tcp_fin: Impossible, sk->sk_state=7" in client side
when doing stress testing using wrk and webfsd.
There are at least two cases may trigger this warning:
1.mptcp is in syncookie, and server recv MP_JOIN SYN request,
in subflow_check_req(), the mptcp_can_accept_new_subflow()
return false, so subflow_init_req_cookie_join_save() isn't
called, i.e. not store the data present in the MP_JOIN syn
request and the random nonce in hash table - join_entries[],
but still send synack. When recv 3rd-ack,
mptcp_token_join_cookie_init_state() will return false, and
3rd-ack is dropped, then if mptcp conn is closed by client,
client will send a DATA_FIN and a MPTCP FIN, the DATA_FIN
doesn't have MP_CAPABLE or MP_JOIN,
so mptcp_subflow_init_cookie_req() will return 0, and pass
the cookie check, MP_JOIN request is fallback to normal TCP.
Server will send a TCP FIN if closed, in client side,
when process TCP FIN, it will do reset, the code path is:
tcp_data_queue()->mptcp_incoming_options()
->check_fully_established()->mptcp_subflow_reset().
mptcp_subflow_reset() will set sock state to TCP_CLOSE,
so tcp_fin will hit TCP_CLOSE, and print the warning.
2.mptcp is in syncookie, and server recv 3rd-ack, in
mptcp_subflow_init_cookie_req(), mptcp_can_accept_new_subflow()
return false, and subflow_req->mp_join is not set to 1,
so in subflow_syn_recv_sock() will not reset the MP_JOIN
subflow, but fallback to normal TCP, and then the same thing
happens when server will send a TCP FIN if closed.
For case1, subflow_check_req() return -EPERM,
then tcp_conn_request() will drop MP_JOIN SYN.
For case2, let subflow_syn_recv_sock() call
mptcp_can_accept_new_subflow(), and do fatal fallback, send reset.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In subflow_check_req(), if subflow sport is mismatch, will put msk,
destroy token, and destruct req, then return -EPERM, which can be
done by subflow_req_destructor() via:
tcp_conn_request()
|--__reqsk_free()
|--subflow_req_destructor()
So we should remove these redundant code, otherwise will call
tcp_v4_reqsk_destructor() twice, and may double free
inet_rsk(req)->ireq_opt.
Fixes: 5bc56388c7 ("mptcp: add port number check for MP_JOIN")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.
This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.
This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split timestamping handling into a new function
mptcp_setsockopt_sol_socket_timestamping().
This is preparation for extending SO_TIMESTAMPING
for PHC binding, since optval will no longer be
integer.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni
Eric Dumazet
Florian Westphal
Davide Caratti
Mat Martineau
Wan Jiabing
Geliang Tang
Yonglong Li
Jakub Kicinski
Matthieu Baerts
Geliang Tang
Yajun Deng
Jianguo Wu
Yangbo Lu