Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Sudip Mukherjee d8cac8d93e rtc: abx80x: use devm_add_action_or_reset()
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated.  Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup function
has been already called by the helper if there was any error.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19 17:27:42 +02:00
Mylène Josserand ee08774424 rtc: abx80x: handle the oscillator failure bit
Handle the Oscillator Failure ('OF') bit from Oscillator Status register
(0x1D). This bit is cleared on set_time function and is read each time the
date/time is read, but only in case of XT Oscillator selection.
In RC mode, this bit is always set.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25 02:41:13 +01:00
Mylène Josserand 59a8383adb rtc: abx80x: handle autocalibration
The autocalibration is separated in two bits to set in Oscillator
Control register (0x1c) :
 - OSEL bit to select the oscillator type (XT or RC).
 - ACAL bit to select the autocalibration type.

These functionnalities are exported in sysfs entries : "oscillator"
and "autocalibration". Respectively, the values are "xtal" for XT
oscillator and "rc" for RC oscillator and 0 to disable the
autocalibration cycle, 512 for a 512 seconds autocalibration cycle
and 1024 for a cycle of 1024 seconds.

Examples :
Set to XT Oscillator
echo xtal > /sys/class/rtc/rtc0/device/oscillator
Activate an autocalibration every 512 seconds
echo 512 > /sys/class/rtc/rtc0/device/autocalibration

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25 02:41:13 +01:00
Alexandre Belloni 718a820a30 rtc: abx80x: add alarm support
Add alarm support to the abx80x driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11 20:20:01 +01:00
Alexandre Belloni fca733a14e rtc: abx80x: Add Microcrystal rv1805 support
Microcrystal RV-1805 is compatible with Abracon 1805.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11 20:20:01 +01:00
Mitja Spes 5f1b2f7764 rtc: abx80x: fix RTC write bit
Fix RTC write bit as per application manual

Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Mitja Spes <mitja@lxnav.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:31 +02:00
Philippe De Muyter 4d61ff6b99 rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC
chips. It supports in particular, the supersets AB0805 and AB1805.
It allows reading and writing the time, and enables the supercapacitor/
battery charger.

[arnd@arndb.de: abx805 depends on i2c]
[alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()]
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-05 17:10:10 -07:00