Граф коммитов

51 Коммитов

Автор SHA1 Сообщение Дата
Kees Cook b08592d415 ALSA: sound/isa: remove CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-25 00:17:04 +02:00
Ondrej Zary f993348746 ALSA: introduce snd-cmi8328: C-Media CMI8328 driver
Introduce snd-cmi8328 driver for C-Media CMI8328-based sound cards, such as
AudioExcel AV500.

It supports PCM playback and capture (full-duplex) through wss_lib, gameport,
OPL3 and MPU401. The AV500 card has onboard Dream wavetable synth connected
to the MPU401 port and Aux 1 input internally which works too.
The CDROM interface is not supported (as the drivers for these CDROMs were
removed from the kernel some time ago).

A separate driver is needed because CMI8328 is completely different chip to
CMI8329/CMI8330. It's configured by magic registers (there's no PnP). Sound is
provided by a real WSS codec (CS4231A) and the SB part is just a SB Pro
emulation (for DOS games, useless for Linux).

When SB is enabled, the CMI8328 chip disables access to the WSS codec,
emulates SoundBlaster on one side and outputs sound data to the codec - so SB
and WSS can't work together with this card. The WSS codec can do full duplex
by itself so there's no need for crazy things like snd-cmi8330 does
(combining SB and WSS parts into one driver).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-21 07:30:46 +02:00
René Herman cbaa9f60d5 ALSA: ISA: Remove snd-sgalaxy
Its hardware is handled more fully by the new azt1605/azt2316 drivers.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-13 13:02:20 +02:00
René Herman 495311927f ALSA: ISA: New Aztech Sound Galaxy driver
This is a new driver for Aztech Sound Galaxy ISA soundcards based on the
AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers
for either chipset generated from the same source file, with (very)
minimal ifdeffery.

The drivers check the SB DSP version to decide if they are being loaded
for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1.
This isn't full-proof as the DSP version can actually be set through
software but it's close enough -- as far as I've been able to see, the
DSP version can not be stored in the EEPROM and the cards will therefore
startup with the defaults.

This distinction could (with the same success rate) also be used to
decide which chip we're looking at at runtime meaning a single, merged
driver is also an option but I feel it's actually nicer this way. A
merged driver would have to postpone translating the passed in resource
values to the card configuration until it knew which one it was looking
at and would need to postpone erring out on mpu_irq=10 for azt1605 and
mpu_irq=3 for azt2316.

The drivers have been tested on various cards. For snd-azt1605:

FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra
FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II

and for snd-azt2316:

FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB
FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201)
FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202)
FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069
FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300)
FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301)
FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D

826 and 846 were also marketed directly by Aztech and then known as:

FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+
FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D

Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S
chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full
duplex is a little flaky on some.

I38-MSN811 tends to not work in full-duplex but sometimes does with the
highest success rate being achieved when you first start the capture and
then a playback instead of the other way around (it's a CS4231-KL
codec).

The cards with an AD1845XP codec (my I38-MMSN826 and one of my
I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex
works, sometimes not and this varies from try to try. This seems likely
to be a timing problem somewhere inside wss-lib.

I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth
onboard that isn't supported yet. The wavetable synths on I38-MMSN847
and I38-MMSN852 are wired directly to the standard MPU-401 UART and the
AUX1 input on the codec and work without problem.

CD-ROM audio on the cards is routed to the codec "Line" input, Line-In
to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename
the controls due to the capture source enumeration: I see that
capture-source overrides are hardcoded in wss-lib and this is just too
ugly to live.

Versus the old snd-sgalaxy driver these drivers add support for the
models without a configuration EEPROM (which are common), full-duplex,
MPU-401 UART and OPL3. In the future they might grow support for that
ICS2115 WaveFront synth on 826 and an hwdep interface to write to the
EEPROM on the models that have one.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-13 12:57:58 +02:00
Krzysztof Helt a20971b201 ALSA: Merge es1688 and es968 drivers
The ESS ES968 chip is nothing more then a PnP companion
for a non-PnP audio chip. It was paired with non-PnP ESS' chips:
ES688 and ES1688. The ESS' audio chips are handled by the es1688
driver in native mode. The PnP cards are handled by the ES968
driver in SB compatible mode.

Move the ES968 chip handling to the es1688 driver so the driver
can handle both PnP and non-PnP cards. The es968 is removed.

Also, a new PnP id is added for the card I acquired (the change
was tested on this card).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-10 09:49:30 +02:00
Krzysztof Helt ad8decb7f5 ALSA: jazz16: Add support for Media Vision Jazz16 chipset
This is one of Sound Blaster Pro compatible chipsets which is supported
by Linux OSS driver and was missing native supoort for ALSA.

The Jazz16 audio codec is Crystal CS4216 which is capable
of playback and recording up to 48 kHz stereo.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21 12:09:22 +01:00
Krzysztof Helt 14ff3e7830 ALSA: dt019x: merge into the als100 driver
The als100 driver is so similar to the dt019x/als007 driver
that one driver's source can be used for both drivers with
only few changes. Merge the dt019x driver into the als100.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-11 14:43:04 +01:00
Krzysztof Helt acd4710091 ALSA: sscape: convert to firmware loader framework
The conversion solves the problem that firmware size was set to 64KB
while non PnP cards have 128KB firmware files.

An additional firmware initialization code has been moved from the OSS
driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 07:51:56 +02:00
Krzysztof Helt f0968e3f7a ALSA: sscape: add supoort for SPEA Media FX/Reveal SC-600
Move code from the OSS sscape driver in order to support old Soundscape OEM models.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:31:36 +02:00
Takashi Iwai 45d60e3648 Merge branch 'topic/sc6000' into for-linus
* topic/sc6000:
  ALSA: sc6000: enable joystick port
  ALSA: sc6000: fix older card initialization
  ALSA: sc6000: add support for SC-6600 and SC-7000
2009-06-10 07:26:45 +02:00
Krzysztof Helt c282866101 ALSA: sc6000: add support for SC-6600 and SC-7000
Add support for later cards based on CompuMedia ASC-9408 chipsets.
These cards were produced by Gallant.

This patch make the OSS aedsp16 driver redundant.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-14 13:27:31 +02:00
Takashi Iwai 7c7cae17e0 ALSA: wavefront - Always use request_firmware()
Always use request_firmware() for loading yss225_registers image.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:38:43 -07:00
Takashi Iwai d080732334 Merge branch 'topic/sscape-fix' into for-linus 2009-03-24 00:36:21 +01:00
Takashi Iwai 4c5ecb7e59 Merge branch 'topic/msnd' into for-linus 2009-03-24 00:36:15 +01:00
Krzysztof Helt c2b73d1458 ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection
cs4232 and cs4236 driver merge to solve PnP BIOS detection.

Also, the patch adds recognition if the chip is cs4236b+
or earlier part. This unifies drivers for both cs4232
and cs4236+ chips. It allows to use the PnP BIOS
detection for the cs4236+ chips. Previously, only
the snd-cs4232 could be detected by the PnP BIOS.

The cs4232+ cards reports two separate PnP BIOS ids.

The patch adds search for the second id to find out
resources assigned to a control port.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16 23:05:25 +01:00
Krzysztof Helt c97dff84e0 ALSA: cmi8330: add MPU-401 support
Add MPU-401 port support for the chip.
Also, update some error messages and description.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-29 11:47:02 +01:00
Krzysztof Helt 56305757f0 ALSA: sscape: update Kconfig description about SoundScape cards
The SoundScape driver handles more cards then described.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-29 11:46:25 +01:00
Krzysztof Helt f6c6383502 ALSA: Turtle Beach Multisound Classic/Pinnacle driver
This is driver for Turtle Beach Multisound cards:
Classic, Fiji and Pinnacle.

Tested pcm playback and recording and MIDI playback
on Multisound Pinnacle.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-28 07:47:36 +01:00
Krzysztof Helt 48972cc510 ALSA: cmi8330: add OPL3 support
Add OPL3 handling to the driver
and volume control for FM synthesis.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-21 08:36:39 +01:00
Ville Syrjala 0f101fa6bc ALSA: gusextreme: Fix build errors
gusextreme depends on opl3 support. Add the approriate select to Kconfig.
Also remove the unnecessary hwdep select.

Relevant build errors:
ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined!
ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined!

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-10 07:54:25 +01:00
Takashi Iwai ac68c16a44 ALSA: remove obsolete *_FIRMARE_IN_KERNEL in isa/Kconfig
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29 10:06:16 +02:00
Krzysztof Helt 760fc6b838 ALSA: wss_lib: use wss detection code instead of ad1848 one
Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.

This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.

I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)

Sound playback and recording works on all these cards.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06 15:40:02 +02:00
Krzysztof Helt ead893c0de ALSA: wss_lib: use wss pcm code instead of ad1848 one
Use the wss pcm code and kill the ad1848 pcm code.

The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06 15:39:56 +02:00
Krzysztof Helt 9295aea1e8 ALSA: wss_lib: move cs4231_lib into wss_lib
Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06 15:39:46 +02:00
David Woodhouse 751851af7a Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:

	sound/pci/Kconfig
2008-07-14 15:51:11 -07:00
Jaswinder Singh d71792ac3d firmware: convert sb16_csp driver to use firmware loader exclusively
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:45:46 -07:00
Krzysztof Helt 9f240a558f ALSA: opti93x: use cs4231 lib
This patch converts the Opti93x driver to use
the cs4231 library instead of duplicating the code.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13 16:47:38 +02:00
Adrian Bunk 40445ac5e9 [ALSA] remove SND_GUS_SYNTH
After the removal of the sequencer instrument layer SND_GUS_SYNTH was
no longer used.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06 11:54:53 +02:00
Takashi Iwai 89fe511792 sound: Convert to menuconfig
Convert menu in sound Kconfig files to menuconfig and if.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 15:56:20 +02:00
Jaroslav Kysela 5683bc6e9e [ALSA] SC6000 driver - add HAS_IOPORT dependency
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:24 +02:00
Krzysztof Helt e307258d5b [ALSA] Gallant SC-6000 driver
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver.
This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio
Plus True 16).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:21 +02:00
Takashi Iwai c2b1239a9f [ALSA] wavefront - Use standard firmware loader
Use the standard firmware loader for loading ICS2115 OS firmware file.
This is the last old bad guy that is still using sys_open() and sys_read()
calls, and now all should be gone.
The patch also adds the missing description of module options related
with wavefront_synth.c.
Due to this rewrite, user will have to copy or make symlink the firmware
file appropriately to the standard firmware path such as /lib/firmware.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:22 +02:00
Adrian Bunk 706568967c [ALSA] fix SND_CS5530=y, ISA=n compilation
This patch fixes the following compile error with
CONFIG_SND_CS5530=y, CONFIG_ISA=n:
<--  snip  -->
...
  LD      .tmp_vmlinux1
sound/built-in.o: In function 'snd_sb16_capture_trigger':
sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command'
sound/built-in.o: In function 'snd_sb16_playback_trigger':
sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command'
...
<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:49 +02:00
Takashi Iwai dda369cf20 [ALSA] Fix SB-module dependency with PCI drivers
A few PCI drivers like ALS4000 and CS5530 require the SB16-codes.
This patch fixes / improves the dependency between SB modules and
PCI drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:21 +02:00
Clemens Ladisch 1327e2b859 [ALSA] do not depend on FW_LOADER when internal firmware images are used
Since request_firmware() is no longer used when the internal firmware
images are used, it is no longer necessary to depend on FW_LOADER in
this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:56:14 +02:00
Clemens Ladisch d65b790adb [ALSA] Kconfig: clarify help text for external firmware entries
The external firmware files are not in the alsa-plugins but in the
alsa-firmware package.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:46 +02:00
Clemens Ladisch badec46ddf [ALSA] Kconfig: fix FW_LOADER dependencies
Move the FW_LOADER dependencies out of the *_FIRMWARE_IN_KERNEL entries
because these drivers use the firmware loader regardless of whether
there is an in-kernel firmware image.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:46 +02:00
Takashi Iwai 8ad2da1937 [ALSA] Enable Kconfig options for external firmwares
Some drivers are already ifdefs for enabling external firmwares
but not defined in Kconfig.  Now they appear as the kernel configs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:43 +02:00
Clemens Ladisch 226968c7af [ALSA] wavefront: add request_firmware()
Load the YSS225 register initialization data using request_firmware(),
if possible, instead of using the built-in data blob.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:01:16 +01:00
Clemens Ladisch de66d53e46 [ALSA] sb16: add request_firmware()
Load the CSP programs using request_firmware(), if possible, instead of
using the built-in firmware blobs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09 09:01:14 +01:00
Takashi Iwai c9949452f2 [ALSA] Fix dependency of snd-adlib driver in Kconfig
Added the missing dependency on CONFIG_SND for snd-adlib driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-22 10:51:10 +02:00
Rene Herman cf40a310a7 [ALSA] AdLib FM card driver
Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is
just an OPL2, which was already supported by sound/drivers/opl3, so only
very minimal bus-glue is needed. The patch applies cleanly to both
2.6.16 and 2.6.16-mm1.

The driver has been tested with an actual ancient 8-bit ISA AdLib card
and works fine. It also works fine for an OPL3 {,emulation} as still
found on many ISA soundcards but given that AdLib cards don't have their
own mixer, upping the volume from 0 might be a problem without the card
driver already loaded and driving the OPL3.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Martin Langer 1841f613fd [ALSA] Add snd-miro driver
Added snd-miro driver for miroSOUND PCM by Martin Langer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Takashi Iwai 7f52bdb61b [ALSA] Remove SND_GENERIC_DRIVER from isa/Kconfig
Modules: ISA

Remove the obsolete SND_GENERIC_DRIVER from isa/Kconfig.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:28:41 +01:00
Takashi Iwai 230b5c1a61 [ALSA] Sort Kconfig entries
Modules: ISA,PCI drivers

Sort Kconfig entries in alphabetical order.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:16:31 +01:00
Takashi Iwai 43bcd973d6 [ALSA] Add snd_card_set_generic_dev() call to ISA drivers
ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver
Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver
ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver
AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver
Wavefront drivers
- Added snd_card_set_generic_dev() call.
- Added SND_GENERIC_DRIVER to Kconfig.
- Clean up the error path in probe if necessary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 10:42:01 +02:00
Bodo Eggert 8dbfc5cfdc [PATCH] use select in sound/isa/Kconfig
In sound/isa/Kconfig, select ISAPNP and depend on ISAPNP are intermixed,
resulting in funny behaviour.  (Soundcarts get selectable if other
soundcards are selected).

This patch changes the "depend on ISAPNP"s to select.

Signed-Off-By: Bodo Eggert <7eggert@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:19 -07:00
Al Viro 276bd31ce5 [PATCH] Kconfig fix (ISA_DMA_API and sound/*)
fixed kconfig dependencies on ISA_DMA_API for parts of sound/* that rely
on it.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:40 -07:00
Jaroslav Kysela 7028b09eec [ALSA] select ISAPNP for SND_INTERWAVE_STB target
ISA


Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29 10:15:44 +02:00
Andrew Morton 42d77c7017 [PATCH] interwave needs isa pnp
Fix bug #4509

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:31 -07:00