We negotiate rsize mounts (and it can be overridden by user) to
typically 4MB, so using larger default I/O sizes from userspace
(changing to 1MB default i/o size returned by stat) the
performance is much better (and not just for long latency
network connections) in most use cases for SMB3 than the default I/O
size (which ends up being 128K for cp and can be even smaller for cp).
This can be 4x slower or worse depending on network latency.
By changing inode->blocksize from 32K (which was perhaps ok
for very old SMB1/CIFS) to a larger value, 1MB (but still less than
max size negotiated with the server which is 4MB, in order to minimize
risk) it significantly increases performance for the
noncached case, and slightly increases it for the cached case.
This can be changed by the user on mount (specifying bsize=
values from 16K to 16MB) to tune better for performance
for applications that depend on blocksize.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a request is cancelled, we can't assume that the server returns
1 credit back. Instead we need to wait for a response and process
the number of credits granted by the server.
Create a separate mid callback for cancelled request, parse the number
of credits in a response buffer and add them to the client's credits.
If the didn't get a response (no response buffer available) assume
0 credits granted. The latter most probably happens together with
session reconnect, so the client's credits are adjusted anyway.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After failing to reconnect to original target, it will retry any
target available from DFS cache.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch will make use of DFS cache routines where appropriate and
do not always request a new referral from server.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Add new dfs_cache.[ch] files
* Add new /proc/fs/cifs/dfscache file
- dump current cache when read
- clear current cache when writing "0" to it
* Add delayed_work to periodically refresh cache entries
The new interface will be used for caching DFS referrals, as well as
supporting client target failover.
The DFS cache is a hashtable that maps UNC paths to cache entries.
A cache entry contains:
- the UNC path it is mapped on
- how much the the UNC path the entry consumes
- flags
- a Time-To-Live after which the entry expires
- a list of possible targets (linked lists of UNC paths)
- a "hint target" pointing the last known working target or the first
target if none were tried. This hint lets cifs.ko remember and try
working targets first.
* Looking for an entry in the cache is done with dfs_cache_find()
- if no valid entries are found, a DFS query is made, stored in the
cache and returned
- the full target list can be copied and returned to avoid race
conditions and looped on with the help with the
dfs_cache_tgt_iterator
* Updating the target hint to the next target is done with
dfs_cache_update_tgthint()
These functions have a dfs_cache_noreq_XXX() version that doesn't
fetches referrals if no entries are found. These versions don't
require the tcp/ses/tcon/cifs_sb parameters as a result.
Expired entries cannot be used and since they have a pretty short TTL
[1] in order for them to be useful for failover the DFS cache adds a
delayed work called periodically to keep them fresh.
Since we might not have available connections to issue the referral
request when refreshing we need to store volume_info structs with
credentials and other needed info to be able to connect to the right
server.
1: Windows defaults: 5mn for domain-based referrals, 30mn for regular
links
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will be needed by DFS cache.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Technically 3.02 is not the dialect name although that is more familiar to
many, so we should also accept the official dialect name (3.0.2 vs. 3.02)
in vers=
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With direct I/O read, we transfer the data directly from transport layer to
the user data buffer.
Change in v3: add support for kernel AIO
Change in v4:
Refactor common read code to __cifs_readv for direct and non-direct I/O.
Retry on direct I/O failure.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to debug complex problems it is often helpful to
have detailed information on the client and server view
of the open file information. Add the ability for root to
view the list of smb3 open files and dump the persistent
handle and other info so that it can be more easily
correlated with server logs.
Sample output from "cat /proc/fs/cifs/open_files"
# Version:1
# Format:
# <tree id> <persistent fid> <flags> <count> <pid> <uid> <filename> <mid>
0x5 0x800000378 0x8000 1 7704 0 some-file 0x14
0xcb903c0c 0x84412e67 0x8000 1 7754 1001 rofile 0x1a6d
0xcb903c0c 0x9526b767 0x8000 1 7720 1000 file 0x1a5b
0xcb903c0c 0x9ce41a21 0x8000 1 7715 0 smallfile 0xd67
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
To allow better debugging (for example applications with
handle leaks, or complex reconnect scenarios) display the
number of open files (on the client) and number of open
server file handles for each tcon in /proc/fs/cifs/Stats.
Note that open files on server is one larger than local
due to handle caching (in this case of the root of
the share). In this example there are two local
open files, and three (two file and one directory handle)
open on the server.
Sample output:
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 36 maximum at one time: 2
1) \\localhost\test
SMBs: 69
Bytes read: 27 Bytes written: 0
Open files: 2 total (local), 3 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 19 total 0 failed
Closes: 16 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
We do not call cifs_open_file() for directories and thus we do not have a
pSMBFile we can extract the FIDs from.
Solve this by instead always using a compounded open/query/close for
the passthrough ioctl.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This allows userspace tools to query the raw info levels for cifs files
and process the response in userspace.
In particular this is useful for many of those data where there is no
corresponding native data structure in linux.
For example querying the security descriptor for a file and extract the
SIDs.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ 1484130
Update cifs_find_fid_lock_conflict() to recognize that
ODF locks do not conflict with eachother.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Modern servers often support 8MB as maximum i/o size, and we see some
performance benefits (my testing showed 1 to 13% on write paths,
and 1 to 3% on read paths for increasing the default to 4MB). If server
doesn't support larger i/o size, during negotiate protocol it is already
set correctly to the server's maximum if lower than 4MB.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Each time we reconnect to the same server, bump an instance
counter (and display in /proc/fs/cifs/DebugData) to make it
easier to debug.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
/proc/fs/cifs/Stats when CONFIG_CIFS_STATS2 is enabled logs 'slow'
responses, but depending on the server you are debugging a
one second timeout may be too fast, so allow setting it to
a larger number of seconds via new module parameter
/sys/module/cifs/parameters/slow_rsp_threshold
or via modprobe:
slow_rsp_threshold:Amount of time (in seconds) to wait before
logging that a response is delayed.
Default: 1 (if set to 0 disables msg). (uint)
Recommended values are 0 (disabled) to 32767 (9 hours) with
the default remaining as 1 second.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
cifs_delete_mid() is called once we are finished handling a mid and we
expect no more work done on this mid.
Needed to fix recent commit:
commit 730928c8f4
("cifs: update smb2_queryfs() to use compounding")
Add a warning if someone tries to dequeue a mid that has already been
flagged to be deleted.
Also change list_del() to list_del_init() so that if we have similar bugs
resurface in the future we will not oops.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When CONFIG_CIFS_STATS2 is enabled keep counters for slow
commands (ie server took longer than 1 second to respond)
by SMB2/SMB3 command code. This can help in diagnosing
whether performance problems are on server (instead of
client) and which commands are causing the problem.
Sample output (the new lines contain words "slow responses ...")
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Total Large 10 Small 490 Allocations
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 67 maximum at one time: 2
4 slow responses from localhost for command 5
1 slow responses from localhost for command 6
1 slow responses from localhost for command 14
1 slow responses from localhost for command 16
1) \\localhost\test
SMBs: 243
Bytes read: 1024000 Bytes written: 104857600
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 40 total 0 failed
Closes: 39 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
These are used for SMB3 encryption and compounded requests.
Update these functions and the other functions related to SMB3 encryption to
take an array of requests.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CONFIG_CIFS_STATS should always be enabled as Pavel recently
noted. Simple statistics are not a significant performance hit,
and removing the ifdef simplifies the code slightly.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>
These timers were a good idea but weren't used in current code,
and the idea was cifs specific. Future patch will add similar timers
for SMB2/SMB3, but no sense using memory for cifs timers that
aren't used in current code.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.
Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
In cifs, the timestamps are stored in memory in the cifs_fattr structure,
which uses the deprecated 'timespec' structure. Now that the VFS code
has moved on to 'timespec64', the next step is to change over the fattr
as well.
This also makes 32-bit and 64-bit systems behave the same way, and
no longer overflow the 32-bit time_t in year 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use a read lease for the cached root fid so that we can detect
when the content of the directory changes (via a break) at which time
we close the handle. On next access to the root the handle will be reopened
and cached again.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs->master_tlink is NULL against Win Server 2016 (which is
strange.. not sure why) and is dereferenced in cifs_sb_master_tcon().
move master_tlink getter to cifsglob.h so it can be used from
smb2misc.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Add a function to allocate wdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages that
point to the data buffer to write to.
wdata is reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a function to allocate rdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages
that point to the data buffer.
rdata is still reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If "posix" (or synonym "unix" for backward compatibility) specified on mount,
and server advertises support for SMB3.11 POSIX negotiate context, then
enable the new posix extensions on the tcon. This can be viewed by
looking for "posix" in the mount options displayed by /proc/mounts
for that mount (ie if posix extensions allowed by server and the
experimental POSIX extensions also requested on the mount by specifying
"posix" at mount time).
Also add check to warn user if conflicting unix/nounix or posix/noposix specified
on mount.
Signed-off-by: Steve French <smfrench@gmail.com>
Unlike CIFS where UNIX/POSIX extensions had been negotiatable,
SMB3 did not have POSIX extensions yet. Add the new SMB3.11
POSIX negotiate context to ask the server whether it can
support POSIX (and thus whether we can send the new POSIX open
context).
Signed-off-by: Steve French <smfrench@gmail.com>
To improve security it may be helpful to have additional ways to restrict the
ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount
with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0
are weaker and less secure.
Add a module parameter "disable_legacy_dialects"
(/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to
1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount.
Also cleans up a few build warnings about globals for various module parms.
Signed-off-by: Steve French <smfrench@gmail.com>
Note which ones of the module params are cifs dialect only
(N/A for default dialect now that has moved to SMB2.1 or later)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When direct I/O is used, the data buffer may not always align to page
boundaries. Introduce a page offset in transport data structures to
describe the location of the buffer within the page.
Also change the function to pass the page offset when sending data to
transport.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In SMB2_open(), if we got a lease we need to store this in the fid structure
or else we will never be able to map a lease break back to which file/fid
it applies to.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and change the smb2 version to take heder_preamble_size into account
instead of hardcoding it as 4 bytes.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We need a struct TCP_Server_Info *server to this method as it calls
calc_size. The calc_size method will soon be changed to also
take a server argument.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs. This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).
Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
and get rid of some more calls to get_rfc1002_length()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
and get rid of some get_rfc1002_length() in smb2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB3.11 crypto and hash contexts were not being checked strictly enough.
Add parsing and validity checking for the security contexts in the SMB3.11
negotiate response.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Some servers return inode number zero for the root directory, which
causes ls to display incorrect data (missing "." and "..").
If the server returns zero for the inode number of the root directory,
fake an inode number for it.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
This variable is set to 4 for all protocol versions and replaces
the hardcoded constant 4 throughought the code.
This will later be updated to reflect whether a response packet
has a 4 byte length preamble or not once we start removing this
field from the SMB2+ dialects.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB3.11 clients must implement pre-authentification integrity.
* new mechanism to certify requests/responses happening before Tree
Connect.
* supersedes VALIDATE_NEGOTIATE
* fixes signing for SMB3.11
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
* prepare for SMB3.11 pre-auth integrity
* enable sha512 when SMB311 is enabled in Kconfig
* add sha512 as a soft dependency
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
* Remove ses->ipc_tid.
* Make IPC$ regular tcon.
* Add a direct pointer to it in ses->tcon_ipc.
* Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All
IPC tcons are pipes but not all pipes are IPC.
* All TreeConnect functions now cannot take a NULL tcon object.
The IPC tcon has the same lifetime as the session it belongs to. It is
created when the session is created and destroyed when the session is
destroyed.
Since no mounts directly refer to the IPC tcon, its refcount should
always be set to initialisation value (1). Thus we make sure
cifs_put_tcon() skips it.
If the mount request resulting in a new session being created requires
encryption, try to require it too for IPC.
* set SERVER_NAME_LENGTH to serverName actual size
The maximum length of an ipv6 string representation is defined in
INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This patch is for preparing upper layer doing SMB read via RDMA write.
When RDMA write is used for SMB read, the returned data length is in
DataRemaining in the response packet. Reading it properly by adding a
parameter to specifiy where the returned data length is.
Add the defition for memory registration to wdata and return the correct
length based on if RDMA write is used.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When sending I/O, if size is larger than rdma_readwrite_threshold we prepare
to send SMB write packet for a RDMA read via memory registration. The actual
I/O is done by remote peer through local RDMA hardware. Modify the relevant
fields in the packet accordingly, and append a smbd_buffer_descriptor_v1 to
the end of the SMB write packet.
On write I/O finish, deregister the memory region if this was for a RDMA read.
If remote invalidation is not used, the call to smbd_deregister_mr will do
local invalidation and possibly wait. Memory region is normally deregistered
in MID callback as soon as it's used. There are situations where the MID may
not be created on I/O failure, under which memory region is deregistered when
write data context is released.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add "rdma" to CIFS mount options to connect to SMB Direct.
Add checks to validate this is used on SMB 3.X dialects.
To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
At the time of this patch, 3.x can be 3.0, 3.02 or 3.1.1.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SMB3.1.1 is most secure and recent dialect. Fixup labels and lengths
for sMB3.1.1 signing and encryption.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
With the need to discourage use of less secure dialect, SMB1 (CIFS),
we temporarily upgraded the dialect to SMB3 in 4.13, but since there
are various servers which only support SMB2.1 (2.1 is more secure
than CIFS/SMB1) but not optimal for a default dialect - add support
for multidialect negotiation. cifs.ko will now request SMB2.1
or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will
pick the latest most secure one it can support.
In addition since we are sending multidialect negotiate, add
support for secure negotiate to validate that a man in the
middle didn't downgrade us.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
This adds support for writing extended attributes on SMB2+ shares.
Attributes can be written using the setfattr command.
RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.
For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.
In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.
Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Some minor cleanup of cifs query xattr functions (will also make
SMB3 xattr implementation cleaner as well).
Signed-off-by: Steve French <steve.french@primarydata.com>
When the final cifsFileInfo_put() is called from cifsiod and an oplock
break work is queued, lockdep complains loudly:
=============================================
[ INFO: possible recursive locking detected ]
4.11.0+ #21 Not tainted
---------------------------------------------
kworker/0:2/78 is trying to acquire lock:
("cifsiod"){++++.+}, at: flush_work+0x215/0x350
but task is already holding lock:
("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock("cifsiod");
lock("cifsiod");
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by kworker/0:2/78:
#0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0
#1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0
stack backtrace:
CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21
Workqueue: cifsiod cifs_writev_complete
Call Trace:
dump_stack+0x85/0xc2
__lock_acquire+0x17dd/0x2260
? match_held_lock+0x20/0x2b0
? trace_hardirqs_off_caller+0x86/0x130
? mark_lock+0xa6/0x920
lock_acquire+0xcc/0x260
? lock_acquire+0xcc/0x260
? flush_work+0x215/0x350
flush_work+0x236/0x350
? flush_work+0x215/0x350
? destroy_worker+0x170/0x170
__cancel_work_timer+0x17d/0x210
? ___preempt_schedule+0x16/0x18
cancel_work_sync+0x10/0x20
cifsFileInfo_put+0x338/0x7f0
cifs_writedata_release+0x2a/0x40
? cifs_writedata_release+0x2a/0x40
cifs_writev_complete+0x29d/0x850
? preempt_count_sub+0x18/0xd0
process_one_work+0x304/0x8e0
worker_thread+0x9b/0x6a0
kthread+0x1b2/0x200
? process_one_work+0x8e0/0x8e0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x31/0x40
This is a real warning. Since the oplock is queued on the same
workqueue this can deadlock if there is only one worker thread active
for the workqueue (which will be the case during memory pressure when
the rescuer thread is handling it).
Furthermore, there is at least one other kind of hang possible due to
the oplock break handling if there is only worker. (This can be
reproduced without introducing memory pressure by having passing 1 for
the max_active parameter of cifsiod.) cifs_oplock_break() can wait
indefintely in the filemap_fdatawait() while the cifs_writev_complete()
work is blocked:
sysrq: SysRq : Show Blocked State
task PC stack pid father
kworker/0:1 D 0 16 2 0x00000000
Workqueue: cifsiod cifs_oplock_break
Call Trace:
__schedule+0x562/0xf40
? mark_held_locks+0x4a/0xb0
schedule+0x57/0xe0
io_schedule+0x21/0x50
wait_on_page_bit+0x143/0x190
? add_to_page_cache_lru+0x150/0x150
__filemap_fdatawait_range+0x134/0x190
? do_writepages+0x51/0x70
filemap_fdatawait_range+0x14/0x30
filemap_fdatawait+0x3b/0x40
cifs_oplock_break+0x651/0x710
? preempt_count_sub+0x18/0xd0
process_one_work+0x304/0x8e0
worker_thread+0x9b/0x6a0
kthread+0x1b2/0x200
? process_one_work+0x8e0/0x8e0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x31/0x40
dd D 0 683 171 0x00000000
Call Trace:
__schedule+0x562/0xf40
? mark_held_locks+0x29/0xb0
schedule+0x57/0xe0
io_schedule+0x21/0x50
wait_on_page_bit+0x143/0x190
? add_to_page_cache_lru+0x150/0x150
__filemap_fdatawait_range+0x134/0x190
? do_writepages+0x51/0x70
filemap_fdatawait_range+0x14/0x30
filemap_fdatawait+0x3b/0x40
filemap_write_and_wait+0x4e/0x70
cifs_flush+0x6a/0xb0
filp_close+0x52/0xa0
__close_fd+0xdc/0x150
SyS_close+0x33/0x60
entry_SYSCALL_64_fastpath+0x1f/0xbe
Showing all locks held in the system:
2 locks held by kworker/0:1/16:
#0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0
#1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0
Showing busy workqueues and worker pools:
workqueue cifsiod: flags=0xc
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
in-flight: 16:cifs_oplock_break
delayed: cifs_writev_complete, cifs_echo_request
pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3
Fix these problems by creating a a new workqueue (with a rescuer) for
the oplock break work.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
This patch adds support to process write calls passed by io_submit()
asynchronously. It based on the previously introduced async context
that allows to process i/o responses in a separate thread and
return the caller immediately for asynchronous calls.
This improves writing performance of single threaded applications
with increasing of i/o queue depth size.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This patch adds support to process read calls passed by io_submit()
asynchronously. It based on the previously introduced async context
that allows to process i/o responses in a separate thread and
return the caller immediately for asynchronous calls.
This improves reading performance of single threaded applications
with increasing of i/o queue depth size.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently the code doesn't recognize asynchronous calls passed
by io_submit() and processes all calls synchronously. This is not
what kernel AIO expects. This patch introduces a new async context
that keeps track of all issued i/o requests and moves a response
collecting procedure to a separate thread. This allows to return
to a caller immediately for async calls and call iocb->ki_complete()
once all requests are completed. For sync calls the current thread
simply waits until all requests are completed.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.
Once the only place where it is set is removed, the remaining
bits are rendered moot.
Removing it does not prevent "mount" from failing when a non
existent share is passed.
What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
The earlier changes to copy range for cifs unintentionally disabled the more
common form of server side copy.
The patch introduces the file_operations helper cifs_copy_file_range()
which is used by the syscall copy_file_range. The new file operations
helper allows us to perform server side copies for SMB2.0 and 2.1
servers as well as SMB 3.0+ servers which do not support the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE.
The new helper uses the ioctl FSCTL_SRV_COPYCHUNK_WRITE to perform
server side copies. The helper is called by vfs_copy_file_range() only
once an attempt to clone the file using the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE has failed.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Server side copy is one of the most important mechanisms smb2/smb3
supports and it was unintentionally disabled for most use cases.
Renaming calls to reflect the underlying smb2 ioctl called. This is
similar to the name duplicate_extents used for a similar ioctl which is
also used to duplicate files by reusing fs blocks. The name change is to
avoid confusion.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.
The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.
For SMB2, we also use ntlmv2 as a synonym for nltmssp.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
the TreeId field went from 2 bytes in CIFS to 4 bytes in SMB2+. this
commit updates the size of the ipc_tid field of a cifs_ses, which was
still using 2 bytes.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Since we have two different types of reads (pagecache and direct)
we need to process such responses differently after decryption of
a packet. The change allows to specify a callback that copies a read
payload data into preallocated pages.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
We need to process read responses differently because the data
should go directly into preallocated pages. This can be done
by specifying a mid handle callback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
We need to recognize and parse transformed packets in demultiplex
thread to find a corresponsing mid and process it further.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This change allows to encrypt packets if it is required by a server
for SMB sessions or tree connections.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This will allow us to do protocol specific tranformations of packets
before sending to the server. For SMB3 it can be used to support
encryption.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
In order to simplify further encryption support we need to separate
RFC1001 length and SMB2 header when sending a request. Put the length
field in iov[0] and the rest of the packet into following iovs.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
With commit 2b149f119 many things have been fixed/introduced.
However, the default behaviour for RawNTLMSSP authentication
seems to be wrong in case the domain is not passed on the command line.
The main points (see below) of the patch are:
- It alignes behaviour with Windows clients
- It fixes backward compatibility
- It fixes UPN
I compared this behavour with the one from a Windows 10 command line
client. When no domains are specified on the command line, I traced
the packets and observed that the client does send an empty
domain to the server.
In the linux kernel case, the empty domain is replaced by the
primary domain communicated by the SMB server.
This means that, if the credentials are valid against the local server
but that server is part of a domain, then the kernel module will
ask to authenticate against that domain and we will get LOGON failure.
I compared the packet trace from the smbclient when no domain is passed
and, in that case, a default domain from the client smb.conf is taken.
Apparently, connection succeeds anyway, because when the domain passed
is not valid (in my case WORKGROUP), then the local one is tried and
authentication succeeds. I tried with any kind of invalid domain and
the result was always a connection.
So, trying to interpret what to do and picking a valid domain if none
is passed, seems the wrong thing to do.
To this end, a new option "domainauto" has been added in case the
user wants a mechanism for guessing.
Without this patch, backward compatibility also is broken.
With kernel 3.10, the default auth mechanism was NTLM.
One of our testing servers accepted NTLM and, because no
domains are passed, authentication was local.
Moving to RawNTLMSSP forced us to change our command line
to add a fake domain to pass to prevent this mechanism to kick in.
For the same reasons, UPN is broken because the domain is specified
in the username.
The SMB server will work out the domain from the UPN and authenticate
against the right server.
Without the patch, though, given the domain is empty, it gets replaced
with another domain that could be the wrong one for the authentication.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
With the current code it is possible to lock a mutex twice when
a subsequent reconnects are triggered. On the 1st reconnect we
reconnect sessions and tcons and then persistent file handles.
If the 2nd reconnect happens during the reconnecting of persistent
file handles then the following sequence of calls is observed:
cifs_reopen_file -> SMB2_open -> small_smb2_init -> smb2_reconnect
-> cifs_reopen_persistent_file_handles -> cifs_reopen_file (again!).
So, we are trying to acquire the same cfile->fh_mutex twice which
is wrong. Fix this by moving reconnecting of persistent handles to
the delayed work (smb2_reconnect_server) and submitting this work
every time we reconnect tcon in SMB2 commands handling codepath.
This can also lead to corruption of a temporary file list in
cifs_reopen_persistent_file_handles() because we can recursively
call this function twice.
Cc: Stable <stable@vger.kernel.org> # v4.9+
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
We can not unlock/lock cifs_tcp_ses_lock while walking through ses
and tcon lists because it can corrupt list iterator pointers and
a tcon structure can be released if we don't hold an extra reference.
Fix it by moving a reconnect process to a separate delayed work
and acquiring a reference to every tcon that needs to be reconnected.
Also do not send an echo request on newly established connections.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
New mount option "snapshot=<time>" to allow mounting an earlier
version of the remote volume (if such a snapshot exists on
the server).
Note that eventually specifying a snapshot time of 1 will allow
the user to mount the oldest snapshot. A subsequent patch
add the processing for that and another for actually specifying
the "time warp" create context on SMB2/SMB3 open.
Check to make sure SMB2 negotiated, and ensure that
we use a different tcon if mount same share twice
but with different snaphshot times
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add "idsfromsid" mount option to indicate to cifs.ko that it should
try to retrieve the uid and gid owner fields from special sids in the
ACL if present. This first patch just adds the parsing for the mount
option.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
openFileList of tcon can be changed while cifs_reopen_file() is called
that can lead to an unexpected behavior when we return to the loop.
Fix this by introducing a temp list for keeping all file handles that
need to be reopen.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add mount option "max_credits" to allow setting maximum SMB3
credits to any value from 10 to 64000 (default is 32000).
This can be useful to workaround servers with problems allocating
credits, or to throttle the client to use smaller amount of
simultaneous i/o or to workaround server performance issues.
Also adds a cap, so that even if the server granted us more than
65000 credits due to a server bug, we would not use that many.
Signed-off-by: Steve French <steve.french@primarydata.com>
Remove the global file_list_lock to simplify cifs/smb3 locking and
have spinlocks that more closely match the information they are
protecting.
Add new tcon->open_file_lock and file->file_info_lock spinlocks.
Locks continue to follow a heirachy,
cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file
where global tcp_ses_lock still protects socket and cifs_ses, while the
the newer locks protect the lower level structure's information
(tcon and cifs_file respectively).
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Germano Percossi <germano.percossi@citrix.com>
Right now, we send the tgid cross the wire. What we really want to send
though is a hashed fl_owner_t since samba treats this field as a generic
lockowner.
It turns out that because we enforce and release locks locally before
they are ever sent to the server, this patch makes no difference in
behavior. Still, setting OFD locks on the server using the process
pid seems wrong, so I think this patch still makes sense.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Pull cifs iovec cleanups from Al Viro.
* 'sendmsg.cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cifs: don't bother with kmap on read_pages side
cifs_readv_receive: use cifs_read_from_socket()
cifs: no need to wank with copying and advancing iovec on recvmsg side either
cifs: quit playing games with draining iovecs
cifs: merge the hash calculation helpers
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some callers of strtobool() were passing a pointer to unterminated
strings. In preparation of adding multi-character processing to
kstrtobool(), update the callers to not pass single-character pointers,
and switch to using the new kstrtobool_from_user() helper where
possible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Steve French <sfrench@samba.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the echo interval is set to 60 seconds using a macro. This
setting determines the interval at which echo requests are sent to the
server on an idling connection. This setting also affects the time
required for a connection to an unresponsive server to timeout.
Making this setting a tunable allows users to control the echo interval
times as well as control the time after which the connecting to an
unresponsive server times out.
To set echo interval, pass the echo_interval=n mount option.
Version four of the patch.
v2: Change MIN and MAX timeout values
v3: Remove incorrect comment in cifs_get_tcp_session
v4: Fix bug in setting echo_intervalw
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Since many servers (Windows clients, and non-clustered servers) do not
support persistent handles but do support resilient handles, allow
the user to specify a mount option "resilienthandles" in order
to get more reliable connections and less chance of data loss
(at least when SMB2.1 or later). Default resilient handle
timeout (120 seconds to recent Windows server) is used.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Version 2 of the patch. Thanks to Dan Carpenter and the smatch
tool for finding a problem in the first version of this patch.
CC: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Steve French
Pavel Shilovsky
Paulo Alcantara
Kenneth D'souza
Long Li
Ronnie Sahlberg
Arnd Bergmann
Stefano Brivio
Lars Persson
Aurelien Aptel
Steve French
Linus Torvalds
Rabin Vincent
Germano Percossi
Sachin Prabhu
Jeff Layton
Kirill A. Shutemov
Al Viro
Kees Cook