There is a potential dangling pointer problem. we never clean
shadow_req, if there are multiple link lists in this series of
sqes, then the shadow_req will not reallocate, and continue to
use the last one. but in the previous, his memory has been
released, thus forming a dangling pointer. let's clean up him
and make sure that every new link list can reapply for a new
shadow_req.
Fixes: 4fe2c96315 ("io_uring: add support for link with drain")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This includes two fixes for the unicode system for inclusion into Linux
v5.4.
- A patch from Krzysztof Wilczynski solving a build time warning.
- A patch from Colin King making a parsing format static, to reduce
stack size.
Build validated and run time tested using xfstests casefold testcase.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
-----BEGIN PGP SIGNATURE-----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=fhC0
-----END PGP SIGNATURE-----
Merge tag 'unicode-next-v5.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode into dev
fs/unicode patches for 5.4-rc1
This includes two fixes for the unicode system for inclusion into Linux
v5.4.
- A patch from Krzysztof Wilczynski solving a build time warning.
- A patch from Colin King making a parsing format static, to reduce
stack size.
Build validated and run time tested using xfstests casefold testcase.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching
governor for virtualized guests wanting to do guest-side polling
in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling
typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
Crestez, MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski).
-----BEGIN PGP SIGNATURE-----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=TBDQ
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a rework of the main suspend-to-idle code flow (related
to the handling of spurious wakeups), a switch over of several users
of cpufreq notifiers to QoS-based limits, a new devfreq driver for
Tegra20, a new cpuidle driver and governor for virtualized guests, an
extension of the wakeup sources framework to expose wakeup sources as
device objects in sysfs, and more.
Specifics:
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching governor
for virtualized guests wanting to do guest-side polling in the idle
loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel
Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling typos
in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski)"
* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
PM: runtime: Documentation: add runtime_status ABI document
pm-graph: make setVal unbuffered again for python2 and python3
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
...
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
-----BEGIN PGP SIGNATURE-----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=KSaR
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Allocate SQ/CQ ring together, more efficient. Expose this through a
feature flag as well, so we can reduce the number of mmaps by 1
(Hristo and me)
- Fix for sequence logic with SQ thread (Jackie).
- Add support for links with drain commands (Jackie).
- Improved async merging (me)
- Improved buffered async write performance (me)
- Support SQ poll wakeup + event get in single io_uring_enter() (me)
- Support larger SQ ring size. For epoll conversions, the 4k limit was
too small for some prod workloads (Daniel).
- put_user_page() usage (John)
* tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block:
io_uring: increase IORING_MAX_ENTRIES to 32K
io_uring: make sqpoll wakeup possible with getevents
io_uring: extend async work merging
io_uring: limit parallelism of buffered writes
io_uring: add io_queue_async_work() helper
io_uring: optimize submit_and_wait API
io_uring: add support for link with drain
io_uring: fix wrong sequence setting logic
io_uring: expose single mmap capability
io_uring: allocate the two rings together
fs/io_uring.c: convert put_page() to put_user_page*()
RST conversion is happily mostly behind us.
- A new document on reproducible builds.
- We finally got around to zapping the documentation for hardware support
that was removed in 2004; one doesn't want to rush these things.
- The usual assortment of fixes, typo corrections, etc.
You'll still find a handful of annoying conflicts against other trees,
mostly tied to the last RST conversions; resolutions are straightforward
and the linux-next ones are good.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl1/J4IACgkQF0NaE2wM
flhYogf9EgYozCe8RocSq+JjJpZOSFjIGDQv+GwTjOBIdqgO9tSIaY/p0wSkYKil
jYXyMDF+Xwr8podsUep2F7akBM7j9XJ+XBGJcfOna0ypC9xoejMgWt9fU3YvaWge
dQJxIQ/iwkDlKNx6uOYgKysLUWFS0EP/nzPhqBo4bZZzhugvrR46D/nQqFNmGihd
l9yLalJtP5mC0XRUv3hpdAFFFKxdC0R3BGOel2V+slSClp0LEgpdMAuMaKydEDI3
Ch9ZpIp8fB8kqONCs9/X6083WRsDOMe28KgeGrGHo4Jla6u51QBLQjSVKttFv7xk
051yNJwDWMxgl+A4gyNLDPXM7Gd7HQ==
=v4dp
-----END PGP SIGNATURE-----
Merge tag 'docs-5.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's a somewhat calmer cycle for docs this time, as the churn of the
mass RST conversion is happily mostly behind us.
- A new document on reproducible builds.
- We finally got around to zapping the documentation for hardware
support that was removed in 2004; one doesn't want to rush these
things.
- The usual assortment of fixes, typo corrections, etc"
* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
Documentation: kbuild: Add document about reproducible builds
docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
Documentation: Add "earlycon=sbi" to the admin guide
doc🔒 remove reference to clever use of read-write lock
devices.txt: improve entry for comedi (char major 98)
docs: mtd: Update spi nor reference driver
doc: arm64: fix grammar dtb placed in no attributes region
Documentation: sysrq: don't recommend 'S' 'U' before 'B'
mailmap: Update email address for Quentin Perret
docs: ftrace: clarify when tracing is disabled by the trace file
docs: process: fix broken link
Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
Documentation/arm/sa1100: Remove some obsolete documentation
docs/zh_CN: update Chinese howto.rst for latexdocs making
Documentation: virt: Fix broken reference to virt tree's index
docs: Fix typo on pull requests guide
kernel-doc: Allow anonymous enum
Documentation: sphinx: Don't parse socket() as identifier reference
Documentation: sphinx: Add missing comma to list of strings
...
end = range.start + range.len;
If the range.start/range.len is a very large value, then end can overflow
in this operation. It results into a crash in get_valid_blocks() when
accessing the invalid range.start segno.
This issue is reported in ioctl fuzz testing.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
Don't populate the array 'token' on the stack but instead make it
static const. Makes the object code smaller by 234 bytes.
Before:
text data bss dec hex filename
5371 272 0 5643 160b fs/unicode/utf8-core.o
After:
text data bss dec hex filename
5041 368 0 5409 1521 fs/unicode/utf8-core.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Move the static keyword to the front of declarations of nfdi_test_data
and nfdicf_test_data, and resolve the following compiler warnings that
can be seen when building with warnings enabled (W=1):
fs/unicode/utf8-selftest.c:38:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/unicode/utf8-selftest.c:92:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
In function sweep_bh_for_rgrps, which is a helper for punch_hole,
it uses variable buf_in_tr to keep track of when it needs to commit
pending block frees on a partial delete that overflows the
transaction created for the delete. The problem is that the
variable was initialized at the start of function sweep_bh_for_rgrps
but it was never cleared, even when starting a new transaction.
This patch reinitializes the variable when the transaction is
ended, so the next transaction starts out with it cleared.
Fixes: d552a2b9b3 ("GFS2: Non-recursive delete")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
DACL should start with mode ACE first but we are putting it at the
end. reorder them to put it first.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
make cifs more verbose about buffer size errors
and add some comments
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 change notify is important to allow applications to wait
on directory change events of different types (e.g. adding
and deleting files from others systems). Add worker functions
for this.
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introduce a new CONFIG_CIFS_ROOT option to handle root file systems
over a SMB share.
In order to mount the root file system during the init process, make
cifs.ko perform non-blocking socket operations while mounting and
accessing it.
Cc: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
when mounting with modefromsid, we end up writing 4 ACE in a security
descriptor that only has room for 3, thus triggering an out-of-bounds
write. fix this by changing the min size of a security descriptor.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
commit a091c5f67c99 ("smb3: allow parallelizing decryption of reads")
had a potential null dereference
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
An earlier patch "CIFS: fix deadlock in cached root handling"
did not completely address the deadlock in open_shroot. This
patch addresses the deadlock.
In testing the recent patch:
smb3: improve handling of share deleted (and share recreated)
we were able to reproduce the open_shroot deadlock to one
of the target servers in unmount in a delete share scenario.
Fixes: 7e5a70ad88 ("CIFS: fix deadlock in cached root handling")
This is version 2 of this patch. An earlier version of this
patch "smb3: fix unmount hang in open_shroot" had a problem
found by Dan.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
In some cases to work around server bugs or performance
problems it can be helpful to be able to disable requesting
SMB2.1/SMB3 leases on a particular mount (not to all servers
and all shares we are mounted to). Add new mount parm
"nolease" which turns off requesting leases on directory
or file opens. Currently the only way to disable leases is
globally through a module load parameter. This is more
granular.
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
When a share is deleted, returning EIO is confusing and no useful
information is logged. Improve the handling of this case by
at least logging a better error for this (and also mapping the error
differently to EREMCHG). See e.g. the new messages that would be logged:
[55243.639530] server share \\192.168.1.219\scratch deleted
[55243.642568] CIFS VFS: \\192.168.1.219\scratch BAD_NETWORK_NAME: \\192.168.1.219\scratch
In addition for the case where a share is deleted and then recreated
with the same name, have now fixed that so it works. This is sometimes
done for example, because the admin had to move a share to a different,
bigger local drive when a share is running low on space.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Displayed in /proc/fs/cifs/Stats once for each
socket we are connected to.
This allows us to find out what the maximum number of
requests that had been in flight (at any one time). Note that
/proc/fs/cifs/Stats can be reset if you want to look for
maximum over a small period of time.
Sample output (immediately after mount):
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 5 maximum at one time: 2
Max requests in flight: 2
1) \\localhost\scratch
SMBs: 18
Bytes read: 0 Bytes written: 0
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
No point in offloading read decryption if no other requests on the
wire
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
and convert smb2_query_path_info() to use it.
This will eliminate the need for a SMB2_Create when we already have an
open handle that can be used. This will also prevent a oplock break
in case the other handle holds a lease.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Disable offload of the decryption of encrypted read responses
by default (equivalent to setting this new mount option "esize=0").
Allow setting the minimum encrypted read response size that we
will choose to offload to a worker thread - it is now configurable
via on a new mount option "esize="
Depending on which encryption mechanism (GCM vs. CCM) and
the number of reads that will be issued in parallel and the
performance of the network and CPU on the client, it may make
sense to enable this since it can provide substantial benefit when
multiple large reads are in flight at the same time.
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
decrypting large reads on encrypted shares can be slow (e.g. adding
multiple milliseconds per-read on non-GCM capable servers or
when mounting with dialects prior to SMB3.1.1) - allow parallelizing
of read decryption by launching worker threads.
Testing to Samba on localhost showed 25% improvement.
Testing to remote server showed very large improvement when
doing more than one 'cp' command was called at one time.
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Where we have a tcon available we can log \\server\share as part
of the message. Only do this for the VFS log level.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Code cleanup in the 5.1 kernel changed the array
passed into signing verification on large reads leading
to warning messages being logged when copying files to local
systems from remote.
SMB signature verification returned error = -5
This changeset fixes verification of SMB3 signatures of large
reads.
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add new mount option "signloosely" which enables signing but skips the
sometimes expensive signing checks in the responses (signatures are
calculated and sent correctly in the SMB2/SMB3 requests even with this
mount option but skipped in the responses). Although weaker for security
(and also data integrity in case a packet were corrupted), this can provide
enough of a performance benefit (calculating the signature to verify a
packet can be expensive especially for large packets) to be useful in
some cases.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If the server config (e.g. Samba smb.conf "csc policy = disable)
for the share indicates that the share should not be cached, log
a warning message if forced client side caching ("cache=ro" or
"cache=singleclient") is requested on mount.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If a share is known to be only to be accessed by one client, we
can aggressively cache writes not just reads to it.
Add "cache=" option (cache=singleclient) for mounting read write shares
(that will not be read or written to from other clients while we have
it mounted) in order to improve performance.
Signed-off-by: Steve French <stfrench@microsoft.com>
Add some additional logging so the user can see if the share they
mounted with cache=ro is considered read only by the server
CIFS: Attempting to mount //localhost/test
CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use.
CIFS VFS: read only mount of RW share
CIFS: Attempting to mount //localhost/test-ro
CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use.
CIFS VFS: mounted to read only share
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If a share is immutable (at least for the period that it will
be mounted) it would be helpful to not have to revalidate
dentries repeatedly that we know can not be changed remotely.
Add "cache=" option (cache=ro) for mounting read only shares
in order to improve performance in cases in which we know that
the share will not be changing while it is in use.
Signed-off-by: Steve French <stfrench@microsoft.com>
The assignment of pointer server dereferences pointer ses, however,
this dereference occurs before ses is null checked and hence we
have a potential null pointer dereference. Fix this by only
dereferencing ses after it has been null checked.
Addresses-Coverity: ("Dereference before null check")
Fixes: 2808c6639104 ("cifs: add new debugging macro cifs_server_dbg")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
which can be used from contexts where we have a TCP_Server_Info *server.
This new macro will prepend the debugging string with "Server:<servername> "
which will help when debugging issues on hosts with many cifs connections
to several different servers.
Convert a bunch of cifs_dbg(VFS) calls to cifs_server_dbg(VFS)
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we already have a writable handle for a path we want to set the
attributes for then use that instead of a create/set-info/close compound.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
rename() takes a path for old_file and in SMB2 we used to just create
a compound for create(old_path)/rename/close().
If we already have a writable handle we can avoid the create() and close()
altogether and just use the existing handle.
For this situation, as we avoid doing the create()
we also avoid triggering an oplock break for the existing handle.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/cifs/file.c: In function cifs_lock:
fs/cifs/file.c:1696:24: warning: variable cinode set but not used [-Wunused-but-set-variable]
fs/cifs/file.c: In function cifs_write:
fs/cifs/file.c:1765:23: warning: variable cifs_sb set but not used [-Wunused-but-set-variable]
fs/cifs/file.c: In function collect_uncached_read_data:
fs/cifs/file.c:3578:20: warning: variable tcon set but not used [-Wunused-but-set-variable]
'cinode' is never used since introduced by
commit 03776f4516 ("CIFS: Simplify byte range locking code")
'cifs_sb' is not used since commit cb7e9eabb2 ("CIFS: Use
multicredits for SMB 2.1/3 writes").
'tcon' is not used since commit d26e2903fc ("smb3: fix bytes_read statistics")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is not null terminated (length was off by two).
Also see similar change to Samba:
https://gitlab.com/samba-team/samba/merge_requests/666
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb3_punch_hole, variable cifsi set but not used, remove it.
In cifs_lock, variable netfid set but not used, remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Variable rc is being initialized with a value that is never read
and rc is being re-assigned a little later on. The assignment is
redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3 and 3.1.1 added two additional flags including
the priority mask. Add them to our protocol definitions
in smb2pdu.h. See MS-SMB2 2.2.1.2
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add support to send smb2 set-info commands from userspace.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Create smb2_flush_init() and smb2_flush_free() so we can use the flush command
in compounds.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with "modefromsid" retrieve mode bits from
special SID (S-1-5-88-3) on stat. Subsequent patch will fix
setattr (chmod) to save mode bits in S-1-5-88-3-<mode>
Note that when an ACE matching S-1-5-88-3 is not found, we
default the mode to an approximation based on the owner, group
and everyone permissions (as with the "cifsacl" mount option).
See See e.g.
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)
Signed-off-by: Steve French <stfrench@microsoft.com>
The variable ret is being initialized however this is never read
and later it is being reassigned to a new value. The initialization
is redundant and hence can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In f2fs_allocate_data_block(), we will reset fio.retry for IO
alignment feature instead of IO serialization feature.
In addition, spread F2FS_IO_ALIGNED() to check IO alignment
feature status explicitly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In LFS mode, we allow OPU for direct IO, however, we didn't consider
IO alignment feature, so direct IO can trigger unaligned IO, let's
just fallback to buffered IO to keep correct IO alignment semantics
in all places.
Fixes: f847c699cf ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_map_blocks(), we should bail out once __allocate_data_block()
failed.
Fixes: f847c699cf ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In LFS mode, por_fsstress testcase reports a bug as below:
[ASSERT] (fsck_chk_inode_blk: 931) --> ino: 0x12fe has wrong ext: [pgofs:142, blk:215424, len:16]
Since commit f847c699cf ("f2fs: allow out-place-update for direct
IO in LFS mode"), we start to allow OPU mode for direct IO, however,
we missed to update extent cache in __allocate_data_block(), finally,
it cause extent field being inconsistent with physical block address,
fix it.
Fixes: f847c699cf ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As a part of the sanity checking while mounting, distinct segment number
assignment to data and node segments is verified. Fixing a small bug in
this verification between node and data segments. We need to check all
the data segments with all the node segments.
Fixes: 042be0f849 ("f2fs: fix to do sanity check with current segment number")
Signed-off-by: Surbhi Palande <csurbhi@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is similar to 942491c9e6 ("xfs: fix AIM7 regression")
Apparently our current rwsem code doesn't like doing the trylock, then
lock for real scheme. So change our read/write methods to just do the
trylock for the RWF_NOWAIT case.
We don't need a check for IOCB_NOWAIT and !direct-IO because it
is checked in generic_write_checks().
Fixes: b91050a80c ("f2fs: add nowait aio support")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode is newly created, inode page may not synchronize with inode cache,
so fields like .i_inline or .i_extra_isize could be wrong, in below call
path, we may access such wrong fields, result in failing to migrate valid
target block.
Thread A Thread B
- f2fs_create
- f2fs_add_link
- f2fs_add_dentry
- f2fs_init_inode_metadata
- f2fs_add_inline_entry
- f2fs_new_inode_page
- f2fs_put_page
: inode page wasn't updated with inode cache
- gc_data_segment
- is_alive
- f2fs_get_node_page
- datablock_addr
- offset_in_addr
: access uninitialized fields
Fixes: 7a2af766af ("f2fs: enhance on-disk inode structure scalability")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
OSDs are able to perform object copies across different pools. Thus,
there's no need to prevent copy_file_range from doing remote copies if the
source and destination superblocks are different. Only return -EXDEV if
they have different fsid (the cluster ID).
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move the static keyword to the front of declarations of
snap_handle_length, handle_length and connected_handle_length,
and resolve the following compiler warnings that can be seen
when building with warnings enabled (W=1):
fs/ceph/export.c:38:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/ceph/export.c:88:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/ceph/export.c:90:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.
Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.
Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
release_pages() has been available to modules since Oct, 2010,
when commit 0be8557bcd ("fuse: use release_pages()") added
EXPORT_SYMBOL(release_pages). However, this ceph code was still
using a workaround.
Remove the workaround, and call release_pages() directly.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems don't limit what security.* xattrs can be set or
fetched. I see no reason that we need to limit that on cephfs either.
Drop the special xattr handler for "security." xattrs, and allow the
"other" xattr handler to handle security xattrs as well.
In addition to fixing xfstest generic/093, this allows us to support
per-file capabilities (a'la setcap(8)).
Link: https://tracker.ceph.com/issues/41135
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_getxattr will set the CEPH_I_SEC_INITED flag whenever it gets
any xattr that starts with "security.". We only want to set that flag
when fetching the MAC label for the currently-active LSM, however.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
No need to do an extra jump here. Also add some comments on the endifs.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
xfstest generic/451 intermittently fails. The test does O_DIRECT writes
to a file, and then reads back the result using buffered I/O, while
running a separate set of tasks that are also doing buffered reads.
The client will invalidate the cache prior to a direct write, but it's
easy for one of the other readers' replies to race in and reinstantiate
the invalidated range with stale data.
To fix this, we must to serialize direct I/O writes and buffered reads.
We could just sprinkle in some shared locks on the i_rwsem for reads,
and increase the exclusive footprint on the write side, but that would
cause O_DIRECT writes to end up serialized vs. other direct requests.
Instead, borrow the scheme used by nfs.ko. Buffered writes take the
i_rwsem exclusively, but buffered reads take a shared lock, allowing
them to run in parallel.
O_DIRECT requests also take a shared lock, but we need for them to not
run in parallel with buffered reads. A flag on the ceph_inode_info is
used to indicate whether it's in direct or buffered I/O mode. When a
conflicting request is submitted, it will block until the inode can be
flipped to the necessary mode.
Link: https://tracker.ceph.com/issues/40985
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This fixes a build warning to that effect.
Fixes: 1a829ff2a6 ("ceph: no need to check return value of debugfs_create functions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prevent freezing operations during write page faults. This is good
practice for most filesystems, but especially for ceph since we're
monkeying with the signal table here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we have Fx caps, and the we're truncating the size to be larger, then
we'll cache the size attribute change, but the mtime won't be updated.
Move the size handling before the mtime, and add ATTR_MTIME to ia_valid
in that case to make sure the mtime also gets updated.
This fixes xfstest generic/313.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It doesn't do anything to invalidate the cache when dropping RD caps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
cap->session is always non-NULL, so we can just do a single test for
equality w/o testing explicitly for a NULL pointer.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, this function returns ci->i_dirty_caps, but the callers have
to check that that isn't 0 before calling this function. Have the
callers grab that value directly out of the inode, and have
__mark_caps_flushing return the flush_tid instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We actually need the ci->i_ceph_lock here. The necessity of the s_mutex
is less clear. Also add a lockdep assertion for the i_ceph_lock.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's only used to keep count of caps being trimmed, but that requires
that we hold the session->s_mutex to prevent multiple trimming
operations from running concurrently.
We can achieve the same effect using an integer on the stack, which
allows us to (eventually) not need the s_mutex.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's protected by the s_gen_ttl_lock, so we should fetch under it
and ensure that we're using the same generation in both places.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We already mark the mapping in that case, and doing this can cause
false positives to occur at fsync time, as well as spurious read
errors.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make client use osd reply and session message to infer if itself is
blacklisted. Client reconnect to cluster using new entity addr if it
is blacklisted. Auto reconnect is limited to once every 30 minutes.
Auto reconnect is disabled by default. It can be enabled/disabled by
recover_session=<no|clean> mount option. In 'clean' mode, client drops
any dirty data/metadata, invalidates page caches and invalidates all
writable file handles. After reconnect, file locks become stale because
MDS loses track of them. If an inode contains any stale file locks,
read/write on the indoe are not allowed until applications release all
stale file locks.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
After mds evicts session, file locks get lost sliently. It's not safe to
let programs continue to do read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It closes mds sessions, drop all caps and invalidates page caches,
then use new entity address to reconnect to the cluster.
After reconnect, all dirty data/metadata are dropped, file locks
get lost sliently. Open files continue to work because client will
try renewing caps on later read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Also change several other functions' arguments, no logical changes.
This is preparetion for later patch that checks filp error.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Use errseq_t to track and report errors of async metadata operations,
similar to how kernel handles errors during writeback.
If any dirty caps or any unsafe request gets dropped during session
eviction, record -EIO in corresponding inode's i_meta_err. The error
will be reported by subsequent fsync,
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
CEPH_MDS_SESSION_{RESTARTING,RECONNECTING} are for for mds failover,
they are sub-states of CEPH_MDS_SESSION_OPEN. So __close_session()
should send close request for session in these two state.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems that provide virtual xattrs (e.g. CIFS) don't display
them via listxattr(). Ceph does, and that causes some of the tests in
xfstests to fail.
Have cephfs stop listing vxattrs in listxattr. Userspace can always
query them directly when the name is known.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no reason to prevent this. The OSD should be able to handle
this as long as the objects are different, and the existing code falls
back when the offset into the object is different.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes. Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'. This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():
UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
shift exponent 255 is too large for 32-bit type 'int'
Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In jffs2_scan_eraseblock(), 'sumptr' is allocated through kmalloc() if
'sumlen' is larger than 'buf_size'. However, it is not deallocated in the
following execution if jffs2_fill_scan_buf() fails, leading to a memory
leak bug. To fix this issue, free 'sumptr' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>
Merge these two helpers into the only callers to get rid of some
amazingly bad calling conventions.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
In jffs2_add_frag_to_fragtree(), there is an if statement on line 223 to
check whether "this" is NULL:
if (this)
When "this" is NULL, it is used at several places, such as on line 249:
if (this->node)
and on line 260:
if (newfrag->ofs > this->ofs)
Thus possible null-pointer dereferences may occur.
To fix these bugs, -EINVAL is returned when "this" is NULL.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In ubifs_mount(), 'c' is allocated through kzalloc() in alloc_ubifs_info().
However, it is not deallocated in the following execution if
ubifs_fill_super() fails, leading to a memory leak bug. To fix this issue,
free 'c' before going to the 'out_deact' label.
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>
In __ubifs_node_verify_hmac(), 'hmac' is allocated through kmalloc().
However, it is not deallocated in the following execution if
ubifs_node_calc_hmac() fails, leading to a memory leak bug. To fix this
issue, free 'hmac' before returning the error.
Fixes: 49525e5eec ("ubifs: Add helper functions for authentication support")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>
In read_znode(), the indexing node 'idx' is allocated by kmalloc().
However, it is not deallocated in the following execution if
ubifs_node_check_hash() fails, leading to a memory leak bug. To fix this
issue, free 'idx' before returning the error.
Fixes: 16a26b20d2 ("ubifs: authentication: Add hashes to index nodes")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>
The pointer fname is being assigned with a value that is never
read because the function returns after the assignment. The assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit b03755ad6f.
This is sad, and done for all the wrong reasons. Because that commit is
good, and does exactly what it says: avoids a lot of small disk requests
for the inode table read-ahead.
However, it turns out that it causes an entirely unrelated problem: the
getrandom() system call was introduced back in 2014 by commit
c6e9d6f388 ("random: introduce getrandom(2) system call"), and people
use it as a convenient source of good random numbers.
But part of the current semantics for getrandom() is that it waits for
the entropy pool to fill at least partially (unlike /dev/urandom). And
at least ArchLinux apparently has a systemd that uses getrandom() at
boot time, and the improvements in IO patterns means that existing
installations suddenly start hanging, waiting for entropy that will
never happen.
It seems to be an unlucky combination of not _quite_ enough entropy,
together with a particular systemd version and configuration. Lennart
says that the systemd-random-seed process (which is what does this early
access) is supposed to not block any other boot activity, but sadly that
doesn't actually seem to be the case (possibly due bogus dependencies on
cryptsetup for encrypted swapspace).
The correct fix is to fix getrandom() to not block when it's not
appropriate, but that fix is going to take a lot more discussion. Do we
just make it act like /dev/urandom by default, and add a new flag for
"wait for entropy"? Do we add a boot-time option? Or do we just limit
the amount of time it will wait for entropy?
So in the meantime, we do the revert to give us time to discuss the
eventual fix for the fundamental problem, at which point we can re-apply
the ext4 inode table access optimization.
Reported-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some workloads can require far more than 4K oustanding entries. For
example memcached can have ~300K sockets over ~40 cores. Bumping the max
to 32K seems to work pretty well.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To resolve dependencies in following patches
mlx5_ib.h conflict resolved by keeing both hunks
Linux 5.3-rc8
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----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=KXB8
-----END PGP SIGNATURE-----
Merge tag 'for-5.3-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Here are two fixes, one of them urgent fixing a bug introduced in 5.2
and reported by many users. It took time to identify the root cause,
catching the 5.3 release is higly desired also to push the fix to 5.2
stable tree.
The bug is a mess up of return values after adding proper error
handling and honestly the kind of bug that can cause sleeping
disorders until it's caught. My appologies to everybody who was
affected.
Summary of what could happen:
1) either a hang when committing a transaction, if this happens
there's no risk of corruption, still the hang is very inconvenient
and can't be resolved without a reboot
2) writeback for some btree nodes may never be started and we end up
committing a transaction without noticing that, this is really
serious and that will lead to the "parent transid verify failed"
messages"
* tag 'for-5.3-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix unwritten extent buffers and hangs on future writeback attempts
Btrfs: fix assertion failure during fsync and use of stale transaction
Make fs_parse() handle fs_param_is_fd-type parameters that are passed a
string by converting it to an integer (in addition to handling direct fd
specification).
Also range check the integer.
[fix from Yin Fengwei folded]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the ramfs, shmem, tmpfs, devtmpfs and rootfs filesystems to the new
internal mount API as the old one will be obsoleted and removed. This
allows greater flexibility in communication of mount parameters between
userspace, the VFS and the filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Note that tmpfs is slightly tricky as it can contain embedded commas, so it
can't be trivially split up using strsep() to break on commas in
generic_parse_monolithic(). Instead, tmpfs has to supply its own generic
parser.
However, if tmpfs changes, then devtmpfs and rootfs, which are wrappers
around tmpfs or ramfs, must change too - and thus so must ramfs, so these
had to be converted also.
[AV: rewritten]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hugh Dickins <hughd@google.com>
cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The way the logic is setup in io_uring_enter() means that you can't wake
up the SQ poller thread while at the same time waiting (or polling) for
completions afterwards. There's no reason for that to be the case.
Reported-by: Lewis Baker <lbaker@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently merge async work items if we see a strict sequential hit.
This helps avoid unnecessary workqueue switches when we don't need
them. We can extend this merging to cover cases where it's not a strict
sequential hit, but the IO still fits within the same page. If an
application is doing multiple requests within the same page, we don't
want separate workers waiting on the same page to complete IO. It's much
faster to let the first worker bring in the page, then operate on that
page from the same worker to complete the next request(s).
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Variable err is initialized to a value that is never read and it
is re-assigned later. The initialization is redundant and can
be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
This patch adds a missing zero to mode 755 specification required to
express it in octal numeral system.
Reported-by: Łukasz Wrochna <l.wrochna@samsung.com>
Signed-off-by: Artur Świgoń <a.swigon@partner.samsung.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
virtio-fs does not support aborting requests which are being
processed. That is requests which have been sent to fuse daemon on host.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Don't hold onto dentry in lru list if need to re-lookup it anyway at next
access. Only do this if explicitly enabled, otherwise it could result in
performance regression.
More advanced version of this patch would periodically flush out dentries
from the lru which have gone stale.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As of now fuse_dev_alloc() both allocates a fuse device and installs it in
fuse_conn list. fuse_dev_alloc() can fail if fuse_device allocation fails.
virtio-fs needs to initialize multiple fuse devices (one per virtio queue).
It initializes one fuse device as part of call to fuse_fill_super_common()
and rest of the devices are allocated and installed after that.
But, we can't afford to fail after calling fuse_fill_super_common() as we
don't have a way to undo all the actions done by fuse_fill_super_common().
So to avoid failures after the call to fuse_fill_super_common(),
pre-allocate all fuse devices early and install them into fuse connection
later.
This patch provides two separate helpers for fuse device allocation and
fuse device installation in fuse_conn.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The /dev/fuse device uses fiq->waitq and fasync to signal that requests are
available. These mechanisms do not apply to virtio-fs. This patch
introduces callbacks so alternative behavior can be used.
Note that queue_interrupt() changes along these lines:
spin_lock(&fiq->waitq.lock);
wake_up_locked(&fiq->waitq);
+ kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
spin_unlock(&fiq->waitq.lock);
- kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
Since queue_request() and queue_forget() also call kill_fasync() inside
the spinlock this should be safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_fill_super() includes code to process the fd= option and link the
struct fuse_dev to the fd's struct file. In virtio-fs there is no file
descriptor because /dev/fuse is not used.
This patch extracts fuse_fill_super_common() so that both classic fuse and
virtio-fs can share the code to initialize a mount.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
File systems like virtio-fs need to do not have to play directly with
forget list data structures. There is a helper function use that instead.
Rename dequeue_forget() to fuse_dequeue_forget() and export it so that
stacked filesystems can use it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio-fs will need unique IDs for FORGET requests from outside
fs/fuse/dev.c. Make the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will be used by virtio-fs to send init request to fuse server after
initialization of virt queues.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio-fs will need to query the length of fuse_arg lists. Make the symbol
visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio-fs will need to complete requests from outside fs/fuse/dev.c. Make
the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The size of struct fuse_req was reduced from 392B to 144B on a non-debug
config, thus the sanitize_global_limit() helper was setting a larger
default limit. This doesn't really reflect reduction in the memory used by
requests, since the fields removed from fuse_req were added to fuse_args
derived structs; e.g. sizeof(struct fuse_writepages_args) is 248B, thus
resulting in slightly more memory being used for writepage requests
overalll (due to using 256B slabs).
Make the calculatation ignore the size of fuse_req and use the old 392B
value.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The lock_extent_buffer_io() returns 1 to the caller to tell it everything
went fine and the callers needs to start writeback for the extent buffer
(submit a bio, etc), 0 to tell the caller everything went fine but it does
not need to start writeback for the extent buffer, and a negative value if
some error happened.
When it's about to return 1 it tries to lock all pages, and if a try lock
on a page fails, and we didn't flush any existing bio in our "epd", it
calls flush_write_bio(epd) and overwrites the return value of 1 to 0 or
an error. The page might have been locked elsewhere, not with the goal
of starting writeback of the extent buffer, and even by some code other
than btrfs, like page migration for example, so it does not mean the
writeback of the extent buffer was already started by some other task,
so returning a 0 tells the caller (btree_write_cache_pages()) to not
start writeback for the extent buffer. Note that epd might currently have
either no bio, so flush_write_bio() returns 0 (success) or it might have
a bio for another extent buffer with a lower index (logical address).
Since we return 0 with the EXTENT_BUFFER_WRITEBACK bit set on the
extent buffer and writeback is never started for the extent buffer,
future attempts to writeback the extent buffer will hang forever waiting
on that bit to be cleared, since it can only be cleared after writeback
completes. Such hang is reported with a trace like the following:
[49887.347053] INFO: task btrfs-transacti:1752 blocked for more than 122 seconds.
[49887.347059] Not tainted 5.2.13-gentoo #2
[49887.347060] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[49887.347062] btrfs-transacti D 0 1752 2 0x80004000
[49887.347064] Call Trace:
[49887.347069] ? __schedule+0x265/0x830
[49887.347071] ? bit_wait+0x50/0x50
[49887.347072] ? bit_wait+0x50/0x50
[49887.347074] schedule+0x24/0x90
[49887.347075] io_schedule+0x3c/0x60
[49887.347077] bit_wait_io+0x8/0x50
[49887.347079] __wait_on_bit+0x6c/0x80
[49887.347081] ? __lock_release.isra.29+0x155/0x2d0
[49887.347083] out_of_line_wait_on_bit+0x7b/0x80
[49887.347084] ? var_wake_function+0x20/0x20
[49887.347087] lock_extent_buffer_for_io+0x28c/0x390
[49887.347089] btree_write_cache_pages+0x18e/0x340
[49887.347091] do_writepages+0x29/0xb0
[49887.347093] ? kmem_cache_free+0x132/0x160
[49887.347095] ? convert_extent_bit+0x544/0x680
[49887.347097] filemap_fdatawrite_range+0x70/0x90
[49887.347099] btrfs_write_marked_extents+0x53/0x120
[49887.347100] btrfs_write_and_wait_transaction.isra.4+0x38/0xa0
[49887.347102] btrfs_commit_transaction+0x6bb/0x990
[49887.347103] ? start_transaction+0x33e/0x500
[49887.347105] transaction_kthread+0x139/0x15c
So fix this by not overwriting the return value (ret) with the result
from flush_write_bio(). We also need to clear the EXTENT_BUFFER_WRITEBACK
bit in case flush_write_bio() returns an error, otherwise it will hang
any future attempts to writeback the extent buffer, and undo all work
done before (set back EXTENT_BUFFER_DIRTY, etc).
This is a regression introduced in the 5.2 kernel.
Fixes: 2e3c25136a ("btrfs: extent_io: add proper error handling to lock_extent_buffer_for_io()")
Fixes: f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up")
Reported-by: Zdenek Sojka <zsojka@seznam.cz>
Link: https://lore.kernel.org/linux-btrfs/GpO.2yos.3WGDOLpx6t%7D.1TUDYM@seznam.cz/T/#u
Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Link: https://lore.kernel.org/linux-btrfs/5c4688ac-10a7-fb07-70e8-c5d31a3fbb38@profihost.ag/T/#t
Reported-by: Drazen Kacar <drazen.kacar@oradian.com>
Link: https://lore.kernel.org/linux-btrfs/DB8PR03MB562876ECE2319B3E579590F799C80@DB8PR03MB5628.eurprd03.prod.outlook.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204377
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.
That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.
In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:
1) evict_refill_and_join() will often change the transaction handle's
block reserve (->block_rsv) and set its ->bytes_reserved field to a
value greater than 0. If evict_refill_and_join() never commits the
transaction, the eviction handler ends up decreasing the reference
count (->use_count) of the transaction handle through the call to
btrfs_end_transaction(), and after that point we have a transaction
handle with a NULL ->block_rsv (which is the value prior to the
transaction join from evict_refill_and_join()) and a ->bytes_reserved
value greater than 0. If after the eviction/iput completes the inode
logging path hits an error or it decides that it must fallback to a
transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
non-zero value from btrfs_log_dentry_safe(), and because of that
non-zero value it tries to commit the transaction using a handle with
a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
the transaction commit hit an assertion failure at
btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
the ->block_rsv is NULL. The produced stack trace for that is like the
following:
[192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
[192922.917553] ------------[ cut here ]------------
[192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
[192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G W 5.1.4-btrfs-next-47 #1
[192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
(...)
[192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
[192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
[192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
[192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
[192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
[192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
[192922.923200] FS: 00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
[192922.923579] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
[192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[192922.925105] Call Trace:
[192922.925505] btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
[192922.925911] btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
[192922.926324] btrfs_sync_file+0x44c/0x490 [btrfs]
[192922.926731] do_fsync+0x38/0x60
[192922.927138] __x64_sys_fdatasync+0x13/0x20
[192922.927543] do_syscall_64+0x60/0x1c0
[192922.927939] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[192922.934077] ---[ end trace f00808b12068168f ]---
2) If evict_refill_and_join() decides to commit the transaction, it will
be able to do it, since the nested transaction join only increments the
transaction handle's ->use_count reference counter and it does not
prevent the transaction from getting committed. This means that after
eviction completes, the fsync logging path will be using a transaction
handle that refers to an already committed transaction. What happens
when using such a stale transaction can be unpredictable, we are at
least having a use-after-free on the transaction handle itself, since
the transaction commit will call kmem_cache_free() against the handle
regardless of its ->use_count value, or we can end up silently losing
all the updates to the log tree after that iput() in the logging path,
or using a transaction handle that in the meanwhile was allocated to
another task for a new transaction, etc, pretty much unpredictable
what can happen.
In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).
The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When filtering xattr list for reading, presence of trusted xattr
results in a security audit log. However, if there is other content
no errno will be set, and if there isn't, the errno will be -ENODATA
and not -EPERM as is usually associated with a lack of capability.
The check does not block the request to list the xattrs present.
Switch to ns_capable_noaudit to reflect a more appropriate check.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-security-module@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org # v3.18+
Fixes: a082c6f680 ("ovl: filter trusted xattr for non-admin")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
if ovl_encode_real_fh() fails, no memory was allocated
and the error in the error-valued pointer should be returned.
Fixes: 9b6faee074 ("ovl: check ERR_PTR() return value from ovl_encode_fh()")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Get rid of the callback, deal with that and dentry in callers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Configfs abuses symlink(2). Unlike the normal filesystems, it
wants the target resolved at symlink(2) time, like link(2) would've
done. The problem is that ->symlink() is called with the parent
directory locked exclusive, so resolving the target inside the
->symlink() is easily deadlocked.
Short of really ugly games in sys_symlink() itself, all we can
do is to unlock the parent before resolving the target and
relock it after. However, that invalidates the checks done
by the caller of ->symlink(), so we have to
* check that dentry is still where it used to be
(it couldn't have been moved, but it could've been unhashed)
* recheck that it's still negative (somebody else
might've successfully created a symlink with the same name
while we were looking the target up)
* recheck the permissions on the parent directory.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All the popular filesystems need to grab the inode lock for buffered
writes. With io_uring punting buffered writes to async context, we
observe a lot of contention with all workers hamming this mutex.
For buffered writes, we generally don't need a lot of parallelism on
the submission side, as the flushing will take care of that for us.
Hence we don't need a deep queue on the write side, as long as we
can safely punt from the original submission context.
Add a workqueue with a limit of 2 that we can use for buffered writes.
This greatly improves the performance and efficiency of higher queue
depth buffered async writes with io_uring.
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper for queueing a request for async execution, in preparation
for optimizing it.
No functional change in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The page array pointers are also duplicated across fuse_args_pages and
fuse_req. Get rid of the fuse_req ones.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No need to duplicate the argument arrays in fuse_req, so just dereference
req->args instead of copying to the fuse_req internal ones.
This allows further cleanup of the fuse_req structure.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
All requests are now sent with one of the fuse_simple_... helpers. Get rid
of the old api from the fuse internal header.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename fuse_request_send_notify_reply() to fuse_simple_notify_reply() and
convert to passing fuse_args instead of fuse_req.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since we cannot reserve the request structure up-front, make sure that the
request allocation doesn't fail using __GFP_NOFAIL.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Derive fuse_writepage_args from fuse_io_args.
Sending the request is tricky since it was done with fi->lock held, hence
we must either use atomic allocation or release the lock. Both are
possible so try atomic first and if it fails, release the lock and do the
regular allocation with GFP_NOFS and __GFP_NOFAIL. Both flags are
necessary for correct operation.
Move the page realloc function from dev.c to file.c and convert to using
fuse_writepage_args.
The last caller of fuse_write_fill() is gone, so get rid of it.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The old fuse_read_fill() helper can be deleted, now that the last user is
gone.
The fuse_io_args struct is moved to fuse_i.h so it can be shared between
readdir/read code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Need to extend fuse_io_args with 'attr_ver' and 'ff' members, that take the
functionality of the same named members in fuse_req.
fuse_short_read() can now take struct fuse_args_pages.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Change of semantics in fuse_async_req_send/fuse_send_(read|write): these
can now return error, in which case the 'end' callback isn't called, so the
fuse_io_args object needs to be freed.
Added verification that the return value is sane (less than or equal to the
requested read/write size).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Create a helper named fuse_simple_background() that is similar to
fuse_simple_request(). Unlike the latter, it returns immediately and calls
the supplied 'end' callback when the reply is received.
The supplied 'args' pointer is stored in 'fuse_req' which allows the
callback to interpret the output arguments decoded from the reply.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Extract a fuse_write_flags() helper that converts ki_flags relevant write
to open flags.
The other parts of fuse_send_write() aren't used in the
fuse_perform_write() case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Derive fuse_io_args from struct fuse_args_pages. This will be used for
both synchronous and asynchronous read/write requests.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will allow the use of this function when converting to the simple api
(which doesn't use fuse_req).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_simple_request() is converted to return length of last (instead of
single) out arg, since FUSE_IOCTL_OUT has two out args, the second of which
is variable length.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_req_pages_alloc() is moved to file.c, since its internal use by the
device code will eventually be removed.
Rename to fuse_pages_alloc() to signify that it's not only usable for
fuse_req page array.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Derive fuse_args_pages from fuse_args. This is used to handle requests
which use pages for input or output. The related flags are added to
fuse_args.
New FR_ALLOC_PAGES flags is added to indicate whether the page arrays in
fuse_req need to be freed by fuse_put_request() or not.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We can use the "force" flag to make sure the DESTROY request is always sent
to userspace. So no need to keep it allocated during the lifetime of the
filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In some cases it makes no sense to set pid/uid/gid fields in the request
header. Allow fuse_simple_background() to omit these. This is only
required in the "force" case, so for now just WARN if set otherwise.
Fold fuse_get_req_nofail_nopages() into its only caller. Comment is
obsolete anyway.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will be used by fuse_force_forget().
We can expand fuse_request_send() into fuse_simple_request(). The
FR_WAITING bit has already been set, no need to check.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add 'force' to fuse_args and use fuse_get_req_nofail_nopages() to allocate
the request in that case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of complex games with a reserved request, just use __GFP_NOFAIL.
Both calers (flush, readdir) guarantee that connection was already
initialized, so no need to wait for fc->initialized.
Also remove unneeded clearing of FR_BACKGROUND flag.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
...to make future expansion simpler. The hiearachical structure is a
historical thing that does not serve any practical purpose.
The generated code is excatly the same before and after the patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.
This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled. Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.
Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.
Reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <linux/aio_abi.h>
int main()
{
char opts[128];
int fd = open("/dev/fuse", O_RDWR);
aio_context_t ctx = 0;
struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
struct iocb *cbp = &cb;
sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
mkdir("mnt", 0700);
mount("foo", "mnt", "fuse", 0, opts);
syscall(__NR_io_setup, 1, &ctx);
syscall(__NR_io_submit, ctx, 1, &cbp);
}
Beginning of lockdep output:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.3.0-rc5 #9 Not tainted
-----------------------------------------------------
syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825
and this task is already holding:
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
which would create a new lock dependency:
(&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&(&ctx->ctx_lock)->rlock){..-.}
[...]
Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes: bfe4037e72 ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For some applications that end up using a submit-and-wait type of
approach for certain batches of IO, we can make that a bit more
efficient by allowing the application to block for the last IO
submission. This prevents an async when we don't need it, as the
application will be blocking for the completion event(s) anyway.
Typical use cases are using the liburing
io_uring_submit_and_wait() API, or just using io_uring_enter()
doing both submissions and completions. As a specific example,
RocksDB doing MultiGet() is sped up quite a bit with this
change.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Version 2 upcalls will allow the nfsd to include a hash of the kerberos
principal string in the Cld_Create upcall. If a principal is present in
the svc_cred, then the hash will be included in the Cld_Create upcall.
We attempt to use the svc_cred.cr_raw_principal (which is returned by
gssproxy) first, and then fall back to using the svc_cred.cr_principal
(which is returned by both gssproxy and rpc.svcgssd). Upon a subsequent
restart, the hash will be returned in the Cld_Gracestart downcall and
stored in the reclaim_str_hashtbl so it can be used when handling
reclaim opens.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a "GetVersion" upcall to allow nfsd to determine the maximum upcall
version that the nfsdcld userspace daemon supports. If the daemon
responds with -EOPNOTSUPP, then we know it only supports v1.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If multiple clients are writing to the same file, then due to the fact
we share a single file descriptor between all NFSv3 clients writing
to the file, we have a situation where clients can miss the fact that
their file data was not persisted. While this should be rare, it
could cause silent data loss in situations where multiple clients
are using NLM locking or O_DIRECT to write to the same file.
Unfortunately, the stateless nature of NFSv3 and the fact that we
can only identify clients by their IP address means that we cannot
trivially cache errors; we would not know when it is safe to
release them from the cache.
So the solution is to declare a reboot. We understand that this
should be a rare occurrence, since disks are usually stable. The
most frequent occurrence is likely to be ENOSPC, at which point
all writes to the given filesystem are likely to fail anyway.
So the expectation is that clients will be forced to retry their
writes until they hit the fatal error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a file may contain unstable writes that can error out, then we want
to avoid garbage collecting the struct nfsd_file that may be
tracking those errors.
So in the garbage collector, we try to avoid collecting files that aren't
clean. Furthermore, we avoid immediately kicking off the garbage collector
in the case where the reference drops to zero for the case where there
is a write error that is being tracked.
If the file is unhashed while an error is pending, then declare a
reboot, to ensure the client resends any unstable writes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add support to allow the server to reset the boot verifier in order to
force clients to resend I/O after a timeout failure.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that we can safely clear out the file cache entries when the
nfs server is shut down on a container. Otherwise, the file cache
may end up pinning the mounts.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To support the link with drain, we need to do two parts.
There is an sqes:
0 1 2 3 4 5 6
+-----+-----+-----+-----+-----+-----+-----+
| N | L | L | L+D | N | N | N |
+-----+-----+-----+-----+-----+-----+-----+
First, we need to ensure that the io before the link is completed,
there is a easy way is set drain flag to the link list's head, so
all subsequent io will be inserted into the defer_list.
+-----+
(0) | N |
+-----+
| (2) (3) (4)
+-----+ +-----+ +-----+ +-----+
(1) | L+D | --> | L | --> | L+D | --> | N |
+-----+ +-----+ +-----+ +-----+
|
+-----+
(5) | N |
+-----+
|
+-----+
(6) | N |
+-----+
Second, ensure that the following IO will not be completed first,
an easy way is to create a mirror of drain io and insert it into
defer_list, in this way, as long as drain io is not processed, the
following io in the defer_list will not be actively process.
+-----+
(0) | N |
+-----+
| (2) (3) (4)
+-----+ +-----+ +-----+ +-----+
(1) | L+D | --> | L | --> | L+D | --> | N |
+-----+ +-----+ +-----+ +-----+
|
+-----+
('3) | D | <== This is a shadow of (3)
+-----+
|
+-----+
(5) | N |
+-----+
|
+-----+
(6) | N |
+-----+
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sqo_thread will get sqring in batches, which will cause
ctx->cached_sq_head to be added in batches. if one of these
sqes is set with the DRAIN flag, then he will never get a
chance to process, and finally sqo_thread will not exit.
Fixes: de0617e467 ("io_uring: add support for marking commands as draining")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When doing any form of incremental send the parent and the child trees
need to be compared via btrfs_compare_trees. This can result in long
loop chains without ever relinquishing the CPU. This causes softlockup
detector to trigger when comparing trees with a lot of items. Example
report:
watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153]
CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : __ll_sc_arch_atomic_sub_return+0x14/0x20
lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs]
sp : ffff00001273b7e0
Call trace:
__ll_sc_arch_atomic_sub_return+0x14/0x20
release_extent_buffer+0xdc/0x120 [btrfs]
free_extent_buffer.part.0+0xb0/0x118 [btrfs]
free_extent_buffer+0x24/0x30 [btrfs]
btrfs_release_path+0x4c/0xa0 [btrfs]
btrfs_free_path.part.0+0x20/0x40 [btrfs]
btrfs_free_path+0x24/0x30 [btrfs]
get_inode_info+0xa8/0xf8 [btrfs]
finish_inode_if_needed+0xe0/0x6d8 [btrfs]
changed_cb+0x9c/0x410 [btrfs]
btrfs_compare_trees+0x284/0x648 [btrfs]
send_subvol+0x33c/0x520 [btrfs]
btrfs_ioctl_send+0x8a0/0xaf0 [btrfs]
btrfs_ioctl+0x199c/0x2288 [btrfs]
do_vfs_ioctl+0x4b0/0x820
ksys_ioctl+0x84/0xb8
__arm64_sys_ioctl+0x28/0x38
el0_svc_common.constprop.0+0x7c/0x188
el0_svc_handler+0x34/0x90
el0_svc+0x8/0xc
Fix this by adding a call to cond_resched at the beginning of the main
loop in btrfs_compare_trees.
Fixes: 7069830a9e ("Btrfs: add btrfs_compare_trees function")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Those function are simple boolean predicates there is no need to assign
their return values to interim variables. Use them directly as
predicates. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a structure to encode the type and length for the known on-disk
checksums. This makes it easier to add new checksums later.
The structure and helpers are moved from ctree.h so they don't occupy
space in all headers including ctree.h. This save some space in the
final object.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging weird enospc problems it's handy to be able to dump the
space info when we wake up all tickets, and see what the ticket values
are. This helped me figure out cases where we were enospc'ing when we
shouldn't have been.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We ran into a problem in production where a box with plenty of space was
getting wedged doing ENOSPC flushing. These boxes only had 20% of the
disk allocated, but their metadata space + global reserve was right at
the size of their metadata chunk.
In this case can_overcommit should be allowing allocations without
problem, but there's logic in can_overcommit that doesn't allow us to
overcommit if there's not enough real space to satisfy the global
reserve.
This is for historical reasons. Before there were only certain places
we could allocate chunks. We could go to commit the transaction and not
have enough space for our pending delayed refs and such and be unable to
allocate a new chunk. This would result in a abort because of ENOSPC.
This code was added to solve this problem.
However since then we've gained the ability to always be able to
allocate a chunk. So we can easily overcommit in these cases without
risking a transaction abort because of ENOSPC.
Also prior to now the global reserve really would be used because that's
the space we relied on for delayed refs. With delayed refs being
tracked separately we no longer have to worry about running out of
delayed refs space while committing. We are much less likely to
exhaust our global reserve space during transaction commit.
Fix the can_overcommit code to simply see if our current usage + what we
want is less than our current free space plus whatever slack space we
have in the disk is. This solves the problem we were seeing in
production and keeps us from flushing as aggressively as we approach our
actual metadata size usage.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have some annoying xfstests tests that will create a very small fs,
fill it up, delete it, and repeat to make sure everything works right.
This trips btrfs up sometimes because we may commit a transaction to
free space, but most of the free metadata space was being reserved by
the global reserve. So we commit and update the global reserve, but the
space is simply added to bytes_may_use directly, instead of trying to
add it to existing tickets. This results in ENOSPC when we really did
have space. Fix this by calling btrfs_try_granting_tickets once we add
back our excess space to wake any pending tickets.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While messing with the overcommit logic I noticed that sometimes we'd
ENOSPC out when really we should have run out of space much earlier. It
turns out it's because we'll only reserve up to the free amount left in
the space info for the global reserve, but that doesn't make sense with
overcommit because we could be well above our actual size. This results
in the global reserve not carving out it's entire reservation, and thus
not putting enough pressure on the rest of the infrastructure to do the
right thing and ENOSPC out at a convenient time. Fix this by always
taking our full reservation amount for the global reserve.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It made sense to have the global reserve set at 16M in the past, but
since it is used less nowadays set the minimum size to the number of
items we'll need to update the main trees we update during a transaction
commit, plus some slop area so we can do unlinks if we need to.
In practice this doesn't affect normal file systems, but for xfstests
where we do things like fill up a fs and then rm * it can fall over in
weird ways. This enables us for more sane behavior at extremely small
file system sizes.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This name doesn't really fit with how the space reservation stuff works
now, rename it to btrfs_space_info_free_bytes_may_use so it's clear what
the function is doing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we do not do partial filling of tickets simply remove
orig_bytes, it is no longer needed.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we aren't partially filling tickets we may have some slack
space left in the space_info. We need to account for this in
may_commit_transaction, otherwise we may choose to not commit the
transaction despite it actually having enough space to satisfy our
ticket.
Calculate the free space we have in the space_info, if any, and subtract
this from the ticket we have and use that amount to determine if we will
need to commit to reclaim enough space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we no longer partially fill tickets we need to rework
wake_all_tickets to call btrfs_try_to_wakeup_tickets() in order to see
if any subsequent tickets are able to be satisfied. If our tickets_id
changes we know something happened and we can keep flushing.
Also if we find a ticket that is smaller than the first ticket in our
queue then we want to retry the flushing loop again in case
may_commit_transaction() decides we could satisfy the ticket by
committing the transaction.
Rename this to maybe_fail_all_tickets() while we're at it, to better
reflect what the function is actually doing.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_space_info_add_old_bytes simply checks if we can make the
reservation and updates bytes_may_use, there's no reason to have both
helpers in place.
Factor out the ticket wakeup logic into it's own helper, make
btrfs_space_info_add_old_bytes() update bytes_may_use and then call the
wakeup helper, and replace all calls to btrfs_space_info_add_new_bytes()
with the wakeup helper.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_space_info_add_old_bytes is used when adding the extra space from
an existing reservation back into the space_info to be used by any
waiting tickets. In order to keep us from overcommitting we check to
make sure that we can still use this space for our reserve ticket, and
if we cannot we'll simply subtract it from space_info->bytes_may_use.
However this is problematic, because it assumes that only changes to
bytes_may_use would affect our ability to make reservations. Any
changes to bytes_reserved would be missed. If we were unable to make a
reservation prior because of reserved space, but that reserved space was
free'd due to unlink or truncate and we were allowed to immediately
reclaim that metadata space we would still ENOSPC.
Consider the example where we create a file with a bunch of extents,
using up 2MiB of actual space for the new tree blocks. Then we try to
make a reservation of 2MiB but we do not have enough space to make this
reservation. The iput() occurs in another thread and we remove this
space, and since we did not write the blocks we simply do
space_info->bytes_reserved -= 2MiB. We would never see this because we
do not check our space info used, we just try to re-use the freed
reservations.
To fix this problem, and to greatly simplify the wakeup code, do away
with this partial refilling nonsense. Use
btrfs_space_info_add_old_bytes to subtract the reservation from
space_info->bytes_may_use, and then check the ticket against the total
used of the space_info the same way we do with the initial reservation
attempt.
This keeps the reservation logic consistent and solves the problem of
early ENOSPC in the case that we free up space in places other than
bytes_may_use and bytes_pinned. Thanks,
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I noticed when folding the trace_btrfs_space_reservation() tracepoint
into the btrfs_space_info_update_* helpers that we didn't emit a
tracepoint when doing btrfs_add_reserved_bytes(). I know this is
because we were swapping bytes_may_use for bytes_reserved, so in my mind
there was no reason to have the tracepoint there. But now there is
because we always emit the unreserve for the bytes_may_use side, and
this would have broken if compression was on anyway. Add a tracepoint
to cover the bytes_reserved counter so the math still comes out right.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We duplicate this tracepoint everywhere we call these helpers, so update
the helper to have the tracepoint as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we already have tickets on the list we don't want to steal their
reservations. This is a preparation patch for upcoming changes,
technically this shouldn't happen today because of the way we add bytes
to tickets before adding them to the space_info in most cases.
This does not change the FIFO nature of reserve tickets, it simply
allows us to enforce it in a different way. Previously it was enforced
because any new space would be added to the first ticket on the list,
which would result in new reservations getting a reserve ticket. This
replaces that mechanism by simply checking to see if we have outstanding
reserve tickets and skipping straight to adding a ticket for our
reservation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit fee187d9d9 ("Btrfs: do not set EXTENT_DIRTY along with
EXTENT_DELALLOC"), we never set EXTENT_DIRTY in inode->io_tree, so we
can simplify and stop trying to clear it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The VFS indicates a synchronous write to ->write_iter() via
iocb->ki_flags. The IOCB_{,D}SYNC flags may be set based on the file
(see iocb_flags()) or the RWF_* flags passed to a syscall like
pwritev2() (see kiocb_set_rw_flags()).
However, in btrfs_file_write_iter(), we're checking if a write is
synchronous based only on the file; we use this to decide when to bump
the sync_writers counter and thus do CRCs synchronously. Make sure we do
this for all synchronous writes as determined by the VFS.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add const ]
Signed-off-by: David Sterba <dsterba@suse.com>
generic_write_checks() may modify iov_iter_count(), so we must get the
count after the call, not before. Using the wrong one has a couple of
consequences:
1. We check a longer range in check_can_nocow() for nowait than we're
actually writing.
2. We create extra hole extent maps in btrfs_cont_expand(). As far as I
can tell, this is harmless, but I might be missing something.
These issues are pretty minor, but let's fix it before something more
important trips on it.
Fixes: edf064e7c6 ("btrfs: nowait aio support")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Further simplifaction of the get/set helpers is possible when the token
is uniquely tied to an extent buffer. A condition and an assignment can
be avoided.
The initializations are moved closer to the first use when the extent
buffer is valid. There's one exception in __push_leaf_left where the
token is reused.
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we can safely assume that the token is always a valid pointer,
remove the branches that check that.
Signed-off-by: David Sterba <dsterba@suse.com>
There are helpers for all type widths defined via macro and optionally
can use a token which is a cached pointer to avoid repeated mapping of
the extent buffer.
The token value is known at compile time, when it's valid it's always
address of a local variable, otherwise it's NULL passed by the
token-less helpers.
This can be utilized to remove some branching as the helpers are used
frequenlty.
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_name_in_ext_backref returns either 0/1 depending on whether it
found a backref for the given name. If it returns true then the actual
inode_ref struct is returned in one of its parameters. That's pointless,
instead refactor the function such that it returns either a pointer
to the btrfs_inode_extref or NULL it it didn't find anything. This
streamlines the function calling convention.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_name_in_backref returns either 0/1 depending on whether it
found a backref for the given name. If it returns true then the actual
inode_ref struct is returned in one of its parameters. That's pointless,
instead refactor the function such that it returns either a pointer
to the btrfs_inode_ref or NULL it it didn't find anything. This
streamlines the function calling convention.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The other dev stats functions are already there and the helpers are not
used by anything else.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The io_ctl structure is used for free space management, and used only by
the v1 space cache code, but unfortunatlly the full definition is
required by block-group.h so it can't be moved to free-space-cache.c
without additional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Send is the only user of tree_compare, we can move it there along with
the other helpers and definitions.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>