We have already remove open codes that invoke helpers provide by
fs/buffer.c in all places reading metadata buffers. This patch switch to
use ext4_sb_bread() to replace all sb_bread() helpers, which is
ext4_read_bh() helper back end.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200924073337.861472-7-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Revome all open codes that read metadata buffers, switch to use
ext4_read_bh_*() common helpers.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_journal_get_write_access() fails, we should
terminate the execution flow and release n_group_desc,
iloc.bh, dind and gdb_bh.
Cc: stable@kernel.org
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200829025403.3139-1-dinghao.liu@zju.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
During an online resize an array of pointers to buffer heads gets
replaced so it can get enlarged. If there is a racing block
allocation or deallocation which uses the old array, and the old array
has gotten reused this can lead to a GPF or some other random kernel
memory getting modified.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-2-tytso@mit.edu
Reported-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
So far we have reserved only relatively high fixed amount of revoke
credits for each transaction. We over-reserved by large amount for most
cases but when freeing large directories or files with data journalling,
the fixed amount is not enough. In fact the worst case estimate is
inconveniently large (maximum extent size) for freeing of one extent.
We fix this by doing proper estimate of the amount of blocks that need
to be revoked when removing blocks from the inode due to truncate or
hole punching and otherwise reserve just a small amount of revoke
credits for each transaction to accommodate freeing of xattrs block or
so.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-23-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide ext4_journal_ensure_credits_fn() function to ensure transaction
has given amount of credits and call helper function to prepare for
restarting a transaction. This allows to remove some boilerplate code
from various places, add proper error handling for the case where
transaction extension or restart fails, and reduces following changes
needed for proper revoke record reservation tracking.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
using Unicode 12.1. Also, the usual largish number of cleanups and bug
fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzSDXYACgkQ8vlZVpUN
gaPQ3Qf/Sh0NqHbmbdW1J52oh4GqUKUhUezEac40yZcZBU4p3PFPZ5Ji83kAQV5r
JgHx5YW4AYHs59UkRVq/er7wKEFJxAE8weUq90WYLE1Z/EjojDE8JHSsK00obKNN
rJOm5qX/gy5C7PVUSWkSuAZQPMSGrmH5U5ie0nrI7bFWnr7T5CQkWarspUq53JBG
RP910mPTT/otE7iTgUzjDeAMKfaSdtRhcJn/uTQ+2YZ1BJsHBHJHDnfQtd3CttHs
ncTUaqPnhWqOKJV2Y9TDyAWYeSbn30cF0dpBM38N4u6YwaUwrBp/kPI0tes97SgY
lZM4VEAW6iF+18uLSyv7D0Mpba9qQg==
=9R7U
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Add as a feature case-insensitive directories (the casefold feature)
using Unicode 12.1.
Also, the usual largish number of cleanups and bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
ext4: export /sys/fs/ext4/feature/casefold if Unicode support is present
ext4: fix ext4_show_options for file systems w/o journal
unicode: refactor the rule for regenerating utf8data.h
docs: ext4.rst: document case-insensitive directories
ext4: Support case-insensitive file name lookups
ext4: include charset encoding information in the superblock
MAINTAINERS: add Unicode subsystem entry
unicode: update unicode database unicode version 12.1.0
unicode: introduce test module for normalized utf8 implementation
unicode: implement higher level API for string handling
unicode: reduce the size of utf8data[]
unicode: introduce code for UTF-8 normalization
unicode: introduce UTF-8 character database
ext4: actually request zeroing of inode table after grow
ext4: cond_resched in work-heavy group loops
ext4: fix use-after-free race with debug_want_extra_isize
ext4: avoid drop reference to iloc.bh twice
ext4: ignore e_value_offs for xattrs with value-in-ea-inode
ext4: protect journal inode's blocks using block_validity
ext4: use BUG() instead of BUG_ON(1)
...
The reference to iloc.bh has been dropped in ext4_mark_iloc_dirty.
However, the reference is dropped again if error occurs during
ext4_handle_dirty_metadata, which may result in use-after-free bugs.
Fixes: fb265c9cb49e("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures. These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time. Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.
Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently when the file system resize using ext4_resize_fs() fails it
will report into log that "resized filesystem to <requested block
count>". However this may not be true in the case of failure. Use the
current block count as returned by ext4_blocks_count() to report the
block count.
Additionally, report a warning that "error occurred during file system
resize"
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh
in case ext4_journal_get_write_access() fails.
Additionally kvfree() is missing in the same error path. Fix it by
moving the ext4_journal_get_write_access() before the ext4 sb update as
Ted suggested and release n_group_desc and gdb_bh in case it fails.
Fixes: 61a9c11e5e ("ext4: add missing brelse() add_new_gdb_meta_bg()'s error path")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If we receive a file handle, either from NFS or open_by_handle_at(2),
and it points at an inode which has not been initialized, and the file
system has metadata checksums enabled, we shouldn't try to get the
inode, discover the checksum is invalid, and then declare the file
system as being inconsistent.
This can be reproduced by creating a test file system via "mke2fs -t
ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that
directory, and then running the following program.
#define _GNU_SOURCE
#include <fcntl.h>
struct handle {
struct file_handle fh;
unsigned char fid[MAX_HANDLE_SZ];
};
int main(int argc, char **argv)
{
struct handle h = {{8, 1 }, { 12, }};
open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY);
return 0;
}
Google-Bug-Id: 120690101
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Commit e2b911c535 ("ext4: clean up feature test macros with
predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was
not noticed since only very old versions of resize2fs (before
e2fsprogs 1.42) use this ioctl. However, using a new kernel with an
enterprise Linux userspace will cause attempts to use online resize to
fail with "No reserved GDT blocks".
Fixes: e2b911c535 ("ext4: clean up feature test macros with predicate...")
Cc: stable@kernel.org # v4.4
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: ruippan (潘睿) <ruippan@tencent.com>
Today, when sb_bread() returns NULL, this can either be because of an
I/O error or because the system failed to allocate the buffer. Since
it's an old interface, changing would require changing many call
sites.
So instead we create our own ext4_sb_bread(), which also allows us to
set the REQ_META flag.
Also fixed a problem in the xattr code where a NULL return in a
function could also mean that the xattr was not found, which could
lead to the wrong error getting returned to userspace.
Fixes: ac27a0ec11 ("ext4: initial copy of files from ext3")
Cc: stable@kernel.org # 2.6.19
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 33afdcc540 ("ext4: add a function which sets up group blocks ...")
Cc: stable@kernel.org # 3.3
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()
Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.
Fixes: 33afdcc540 ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.3+
An online resize of a file system with the bigalloc feature enabled
and a 1k block size would be refused since ext4_resize_begin() did not
understand s_first_data_block is 0 for all bigalloc file systems, even
when the block size is 1k.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Avoid growing the file system to an extent so that the last block
group is too small to hold all of the metadata that must be stored in
the block group.
This problem can be triggered with the following reproducer:
umount /mnt
mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \
-E resize=1073741824 /tmp/foo.img 128M
mount /tmp/foo.img /mnt
truncate --size 1708M /tmp/foo.img
resize2fs /dev/loop0 295400
umount /mnt
e2fsck -fy /tmp/foo.img
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
ext4_resize_fs() has an off-by-one bug when checking whether growing of
a filesystem will not overflow inode count. As a result it allows a
filesystem with 8192 inodes per group to grow to 64TB which overflows
inode count to 0 and makes filesystem unusable. Fix it.
Cc: stable@vger.kernel.org
Fixes: 3f8a6411fb
Reported-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
We could use 'sbi' instead of 'EXT4_SB(sb)' to make code more elegant.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
two data corruption bugs involving DAX, as well as a corruption bug
after a crash during a racing fallocate and delayed allocation.
Finally, a number of cleanups and optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloJCiEACgkQ8vlZVpUN
gaOahAgAhcgdPagn/B5w+6vKFdH+hOJLKyGI0adGDyWD9YBXN0wFQvliVgXrTKei
hxW2GdQGc6yHv9mOjvD+4Fn2AnTZk8F3GtG6zdqRM08JGF/IN2Jax2boczG/XnUz
rT9cd3ic2Ff0KaUX+Yos55QwomTh5CAeRPgvB69o9D6L4VJzTlsWKSOBR19FmrSG
NDmzZibgWmHcqzW9Bq8ZrXXx+KB42kUlc8tYYm2n6MTaE0LMvp3d9XcFcnm/I7Bk
MGa2d3/3FArGD6Rkl/E82MXMSElOHJnY6jGYSDaadUeMI5FXkA6tECOSJYXqShdb
ZJwkOBwfv2lbYZJxIBJTy/iA6zdsoQ==
=ZzaJ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- Add support for online resizing of file systems with bigalloc
- Fix a two data corruption bugs involving DAX, as well as a corruption
bug after a crash during a racing fallocate and delayed allocation.
- Finally, a number of cleanups and optimizations.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve smp scalability for inode generation
ext4: add support for online resizing with bigalloc
ext4: mention noload when recovering on read-only device
Documentation: fix little inconsistencies
ext4: convert timers to use timer_setup()
jbd2: convert timers to use timer_setup()
ext4: remove duplicate extended attributes defs
ext4: add ext4_should_use_dax()
ext4: add sanity check for encryption + DAX
ext4: prevent data corruption with journaling + DAX
ext4: prevent data corruption with inline data + DAX
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ext4: retry allocations conservatively
ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA
ext4: Add iomap support for inline data
iomap: Add IOMAP_F_DATA_INLINE flag
iomap: Switch from blkno to disk offset
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for online resizing on bigalloc file system by
implementing EXT4_IOC_RESIZE_FS ioctl. Old resize interfaces (add
block groups and extend last block group) are left untouched. Tests
performed with cluster sizes of 1, 2, 4 and 8 blocks (of size 4k) per
cluster. I will add these tests to xfstests.
Signed-off-by: Harshad Shirwadkar <harshads@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On a 32-bit platform, the value of n_blcoks_count may be wrong during
the file system is resized to size larger than 2^32 blocks. This may
caused the superblock being corrupted with zero blocks count.
Fixes: 1c6bd7173d
Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.7+
We are currently using one bit in s_resize_flags; rename it in order
to allow more of the bits in that unsigned long for other purposes.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Messages passed to ext4_warning() or ext4_error() don't need trailing
newlines, because these function add the newlines themselves.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
"group" is the group where the backup will be placed, and is
initialized to zero in the declaration. This meant that backups for
meta_bg descriptors were erroneously written to the backup block group
descriptors in groups 1 and (desc_per_block-1).
Reproduction information:
mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G
truncate -s 24G /tmp/foo.img
losetup /dev/loop0 /tmp/foo.img
mount /dev/loop0 /mnt
resize2fs /dev/loop0
umount /dev/loop0
dd if=/dev/zero of=/dev/loop0 bs=1024 count=2
e2fsck -fy /dev/loop0
losetup -d /dev/loop0
Signed-off-by: Andy Leiserson <andy@leiserson.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The estimate of necessary transaction credits in ext4_flex_group_add()
is too pessimistic. It reserves credit for sb, resize inode, and resize
inode dindirect block for each group added in a flex group although they
are always the same block and thus it is enough to account them only
once. Also the number of modified GDT block is overestimated since we
fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block.
Make the estimation more precise. That reduces number of requested
credits enough that we can grow 20 MB filesystem (which has 1 MB
journal, 79 reserved GDT blocks, and flex group size 16 by default).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Prevent BUG or corrupted file systems after the following:
mkfs.ext4 /dev/vdc 100M
mount -t ext4 -o sb=40961 /dev/vdc /vdc
resize2fs /dev/vdc
We previously prevented online resizing using the old resize ioctl.
Move the code to ext4_resize_begin(), so the check applies for all of
the resize ioctl's.
Reported-by: Maxim Malkov <malkov@ispras.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When there are no meta block groups update_backups() will compute the
backup block in 32-bit arithmetics thus possibly overflowing the block
number and corrupting the filesystem. OTOH filesystems without meta
block groups larger than 16 TB should be rare. Fix the problem by doing
the counting in 64-bit arithmetics.
Coverity-id: 741252
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
optimizations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vWic
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of cleanups and bug fixes, with some (minor) journal
optimizations"
[ This got sent to me before -rc1, but was stuck in my spam folder. - Linus ]
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits)
ext4: check s_chksum_driver when looking for bg csum presence
ext4: move error report out of atomic context in ext4_init_block_bitmap()
ext4: Replace open coded mdata csum feature to helper function
ext4: delete useless comments about ext4_move_extents
ext4: fix reservation overflow in ext4_da_write_begin
ext4: add ext4_iget_normal() which is to be used for dir tree lookups
ext4: don't orphan or truncate the boot loader inode
ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
ext4: optimize block allocation on grow indepth
ext4: get rid of code duplication
ext4: fix over-defensive complaint after journal abort
ext4: fix return value of ext4_do_update_inode
ext4: fix mmap data corruption when blocksize < pagesize
vfs: fix data corruption when blocksize < pagesize for mmaped data
ext4: fold ext4_nojournal_sops into ext4_sops
ext4: support freezing ext2 (nojournal) file systems
ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs()
ext4: don't check quota format when there are no quota files
jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list
jbd2: avoid pointless scanning of checkpoint lists
...
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized csum machinery.
#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END
# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)
https://bugzilla.kernel.org/show_bug.cgi?id=82201
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Thanks to Dan Carpenter for extending smatch to find bugs like this.
(This was found using a development version of smatch.)
Fixes: 36de928641
Reported-by: Dan Carpenter <dan.carpenter@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
collapse_range and zero_range fallocate functions. In addition,
improve the scalability of adding and remove inodes from the orphan
list.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=C1ZV
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Clean ups and miscellaneous bug fixes, in particular for the new
collapse_range and zero_range fallocate functions. In addition,
improve the scalability of adding and remove inodes from the orphan
list"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
ext4: handle symlink properly with inline_data
ext4: fix wrong assert in ext4_mb_normalize_request()
ext4: fix zeroing of page during writeback
ext4: remove unused local variable "stored" from ext4_readdir(...)
ext4: fix ZERO_RANGE test failure in data journalling
ext4: reduce contention on s_orphan_lock
ext4: use sbi in ext4_orphan_{add|del}()
ext4: use EXT_MAX_BLOCKS in ext4_es_can_be_merged()
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
ext4: remove unnecessary double parentheses
ext4: do not destroy ext4_groupinfo_caches if ext4_mb_init() fails
ext4: make local functions static
ext4: fix block bitmap validation when bigalloc, ^flex_bg
ext4: fix block bitmap initialization under sparse_super2
ext4: find the group descriptors on a 1k-block bigalloc,meta_bg filesystem
ext4: avoid unneeded lookup when xattr name is invalid
ext4: fix data integrity sync in ordered mode
ext4: remove obsoleted check
ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode
ext4: fix locking for O_APPEND writes
...
The set_flexbg_block_bitmap() function assumed that the number of
blocks in a blockgroup was sb->blocksize * 8, which is normally true,
but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block
bitmap corruption after:
mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jon Bernard <jbernard@tuxion.com>
Cc: stable@vger.kernel.org
If a file system has a large number of inodes per block group, all of
the metadata blocks in a flex_bg may be larger than what can fit in a
single block group. Unfortunately, ext4_alloc_group_tables() in
resize.c was never tested to see if it would handle this case
correctly, and there were a large number of bugs which caused the
following sequence to result in a BUG_ON:
kernel bug at fs/ext4/resize.c:409!
...
call trace:
[<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830
[<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80
[<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00
[<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0
[<ffffffff811b9df2>] ? final_putname+0x22/0x50
[<ffffffff811c1371>] sys_ioctl+0x81/0xa0
[<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b
code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0
rip [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180
This can be reproduced with the following command sequence:
mke2fs -t ext4 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G
To fix this, we need to make sure the right thing happens when a block
group's inode table straddles two block groups, which means the
following bugs had to be fixed:
1) Not clearing the BLOCK_UNINIT flag in the second block group in
ext4_alloc_group_tables --- the was proximate cause of the BUG_ON.
2) Incorrectly determining how many block groups contained contiguous
free blocks in ext4_alloc_group_tables().
3) Incorrectly setting the start of the next block range to be marked
in use after a discontinuity in setup_new_flex_group_blocks().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
zhangyi (F)
Dinghao Liu
Suraj Jitindar Singh
Theodore Ts'o
Jan Kara
Linus Torvalds
Pan Bian
Christoph Hellwig
Lukas Czerner
ruippan (潘睿)
Vasily Averin
Kees Cook
Jun Piao
Greg Kroah-Hartman
harshads
Jerry Lee
Jakub Wilk
Insu Yun
Andy Leiserson
Darrick J. Wong
Al Viro
Dmitry Monakhov
liang xie
Peter Zijlstra