This work tries to make the semantics and code around the
narrower ctx access a bit easier to follow. Right now
everything is done inside the .is_valid_access(). Offset
matching is done differently for read/write types, meaning
writes don't support narrower access and thus matching only
on offsetof(struct foo, bar) is enough whereas for read
case that supports narrower access we must check for
offsetof(struct foo, bar) + offsetof(struct foo, bar) +
sizeof(<bar>) - 1 for each of the cases. For read cases of
individual members that don't support narrower access (like
packet pointers or skb->cb[] case which has its own narrow
access logic), we check as usual only offsetof(struct foo,
bar) like in write case. Then, for the case where narrower
access is allowed, we also need to set the aux info for the
access. Meaning, ctx_field_size and converted_op_size have
to be set. First is the original field size e.g. sizeof(<bar>)
as in above example from the user facing ctx, and latter
one is the target size after actual rewrite happened, thus
for the kernel facing ctx. Also here we need the range match
and we need to keep track changing convert_ctx_access() and
converted_op_size from is_valid_access() as both are not at
the same location.
We can simplify the code a bit: check_ctx_access() becomes
simpler in that we only store ctx_field_size as a meta data
and later in convert_ctx_accesses() we fetch the target_size
right from the location where we do convert. Should the verifier
be misconfigured we do reject for BPF_WRITE cases or target_size
that are not provided. For the subsystems, we always work on
ranges in is_valid_access() and add small helpers for ranges
and narrow access, convert_ctx_accesses() sets target_size
for the relevant instruction.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding
struct that allows BPF programs of this type to access some of the
socket's fields (such as IP addresses, ports, etc.). It uses the
existing bpf cgroups infrastructure so the programs can be attached per
cgroup with full inheritance support. The program will be called at
appropriate times to set relevant connections parameters such as buffer
sizes, SYN and SYN-ACK RTOs, etc., based on connection information such
as IP addresses, port numbers, etc.
Alghough there are already 3 mechanisms to set parameters (sysctls,
route metrics and setsockopts), this new mechanism provides some
distinct advantages. Unlike sysctls, it can set parameters per
connection. In contrast to route metrics, it can also use port numbers
and information provided by a user level program. In addition, it could
set parameters probabilistically for evaluation purposes (i.e. do
something different on 10% of the flows and compare results with the
other 90% of the flows). Also, in cases where IPv6 addresses contain
geographic information, the rules to make changes based on the distance
(or RTT) between the hosts are much easier than route metric rules and
can be global. Finally, unlike setsockopt, it oes not require
application changes and it can be updated easily at any time.
Although the bpf cgroup framework already contains a sock related
program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type
(BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called
only once during the connections's lifetime. In contrast, the new
program type will be called multiple times from different places in the
network stack code. For example, before sending SYN and SYN-ACKs to set
an appropriate timeout, when the connection is established to set
congestion control, etc. As a result it has "op" field to specify the
type of operation requested.
The purpose of this new program type is to simplify setting connection
parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is
easy to use facebook's internal IPv6 addresses to determine if both hosts
of a connection are in the same datacenter. Therefore, it is easy to
write a BPF program to choose a small SYN RTO value when both hosts are
in the same datacenter.
This patch only contains the framework to support the new BPF program
type, following patches add the functionality to set various connection
parameters.
This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS
and a new bpf syscall command to load a new program of this type:
BPF_PROG_LOAD_SOCKET_OPS.
Two new corresponding structs (one for the kernel one for the user/BPF
program):
/* kernel version */
struct bpf_sock_ops_kern {
struct sock *sk;
__u32 op;
union {
__u32 reply;
__u32 replylong[4];
};
};
/* user version
* Some fields are in network byte order reflecting the sock struct
* Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to
* convert them to host byte order.
*/
struct bpf_sock_ops {
__u32 op;
union {
__u32 reply;
__u32 replylong[4];
};
__u32 family;
__u32 remote_ip4; /* In network byte order */
__u32 local_ip4; /* In network byte order */
__u32 remote_ip6[4]; /* In network byte order */
__u32 local_ip6[4]; /* In network byte order */
__u32 remote_port; /* In network byte order */
__u32 local_port; /* In host byte horder */
};
Currently there are two types of ops. The first type expects the BPF
program to return a value which is then used by the caller (or a
negative value to indicate the operation is not supported). The second
type expects state changes to be done by the BPF program, for example
through a setsockopt BPF helper function, and they ignore the return
value.
The reply fields of the bpf_sockt_ops struct are there in case a bpf
program needs to return a value larger than an integer.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
One is for a crash when using the :mod: trace probe command into
stack_trace_filter. This bug was introduced during the last merge
window.
The other was there forever. It's a small bug that makes it impossible
to name a module function for kprobes when the module starts with a digit.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZVsqbFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
AsoH+wWK8tsDqI6MBTXO+v5RwLUu/zHClcMEcJGKLFsHRZ8HOJ9Afg+c1LbTujRR
Ck20l+U/DibVO1AnjJ9elJDj7/3ajTUfCrTVCKf5B9XbdzAD2qZle3byynhZvm2Q
CwVbzMvRYd5jZzEiO95YKOhH6iIDfXOZM7vQzz0F/bDZn9uAxiFumwdiSNA+f2wP
6Ykeuth/IZh0xdbaTqsH1XvhweUSpIIjhOZH/V/uAg+LuRffh4sOBR/wjYUMuegX
tgpGfJu8VVsa+GIBcThdCkjy1k48GLBsZ6j/47Lhc5r3GNIVR7D7mb9x3zTn1U30
WTeDu+betctH7b03hiH88kKoEfg=
=RXOC
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull last-minute tracing fixes from Steven Rostedt:
"Two fixes:
One is for a crash when using the :mod: trace probe command into
stack_trace_filter. This bug was introduced during the last merge
window.
The other was there forever. It's a small bug that makes it impossible
to name a module function for kprobes when the module starts with a
digit"
* tag 'trace-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Allow to create probe with a module name starting with a digit
ftrace: Fix regression with module command in stack_trace_filter
This marks many critical kernel structures for randomization. These are
structures that have been targeted in the past in security exploits, or
contain functions pointers, pointers to function pointer tables, lists,
workqueues, ref-counters, credentials, permissions, or are otherwise
sensitive. This initial list was extracted from Brad Spengler/PaX Team's
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.
Left out of this list is task_struct, which requires special handling
and will be covered in a subsequent patch.
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for an objtool rewrite which will have broader checks,
whitelist functions and files which cause problems because they do
unusual things with the stack.
These whitelists serve as a TODO list for which functions and files
don't yet have undwarf unwinder coverage. Eventually most of the
whitelists can be removed in favor of manual CFI hint annotations or
objtool improvements.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/7f934a5d707a574bda33ea282e9478e627fb1829.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Usage of these apis and their compat versions makes
the syscalls: timer_settime and timer_gettime and their
compat implementations simpler.
This patch also serves as a preparatory patch for changing
syscalls to use new time_t data types to support the
y2038 effort by isolating the processing of user pointers
through these apis.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Usage of these apis and their compat versions makes
the syscalls: clock_nanosleep and nanosleep and
their compat implementations simpler.
This is a preparatory patch to isolate data conversions to
struct timespec64 at userspace boundaries. This helps contain
the changes needed to transition to new y2038 safe types.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Usage of these apis and their compat versions makes
the syscalls: clock_gettime, clock_settime, clock_getres
and their compat implementations simpler.
This is a preparatory patch to isolate data conversions to
struct timespec64 at userspace boundaries. This helps contain
the changes needed to transition to new y2038 safe types.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Address a Coverity false positive, which is caused by overly
convoluted code:
Value assigned to variable 'utime' at line 619:utime = rtime;
is overwritten at line 642:utime = rtime - stime; before it
can be used. This makes such variable assignment useless.
Remove this variable assignment and refactor the code related.
Addresses-Coverity-ID: 1371643
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/20170629184128.GA5271@embeddedgus
Signed-off-by: Ingo Molnar <mingo@kernel.org>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group.
So mark the non-const structs as const:
File size before:
text data bss dec hex filename
12582 15361 20 27963 6d3b kernel/cpu.o
File size After adding 'const':
text data bss dec hex filename
12710 15265 20 27995 6d5b kernel/cpu.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: anna-maria@linutronix.de
Cc: bigeasy@linutronix.de
Cc: boris.ostrovsky@oracle.com
Cc: rcochran@linutronix.de
Link: http://lkml.kernel.org/r/f9079e94e12b36d245e7adbf67d312bc5d0250c6.1498737970.git.arvind.yadav.cs@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the value of the rt_rq.rt_nr_migratory and dl_rq.dl_nr_migratory
to the sched_debug output, for instance:
rt_rq[0]:
.rt_nr_running : 2
.rt_nr_migratory : 1 <--- Like this
.rt_throttled : 0
.rt_time : 828.645877
.rt_runtime : 1000.000000
This is useful to debug problems related to the RT/DL schedulers.
This also fixes the format of some variables, that were unsigned, rather
than signed.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Link: http://lkml.kernel.org/r/7896f71cada54ee7dd8507bb666063a2e051c3d4.1498482127.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
This allows creating a probe such as:
p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0
Which is necessary for this command to work:
perf probe -m 8021q -a vlan_gro_receive
Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Cc: stable@vger.kernel.org
Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull networking fixes from David Miller:
1) Need to access netdev->num_rx_queues behind an accessor in netvsc
driver otherwise the build breaks with some configs, from Arnd
Bergmann.
2) Add dummy xfrm_dev_event() so that build doesn't fail when
CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu.
3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan
Carpenter.
4) Fix MCDI command size for filter operations in sfc driver, from
Martin Habets.
5) Fix UFO segmenting so that we don't calculate incorrect checksums,
from Michal Kubecek.
6) When ipv6 datagram connects fail, reset destination address and
port. From Wei Wang.
7) TCP disconnect must reset the cached receive DST, from WANG Cong.
8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric
Dumazet.
9) fman driver has to depend on HAS_DMA, from Madalin Bucur.
10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann.
11) Fix negative page counts with GFO, from Michal Kubecek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
sfc: fix attempt to translate invalid filter ID
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
bpf: prevent leaking pointer via xadd on unpriviledged
arcnet: com20020-pci: add missing pdev setup in netdev structure
arcnet: com20020-pci: fix dev_id calculation
arcnet: com20020: remove needless base_addr assignment
Trivial fix to spelling mistake in arc_printk message
arcnet: change irq handler to lock irqsave
rocker: move dereference before free
mlxsw: spectrum_router: Fix NULL pointer dereference
net: sched: Fix one possible panic when no destroy callback
virtio-net: serialize tx routine during reset
net: usb: asix88179_178a: Add support for the Belkin B2B128
fsl/fman: add dependency on HAS_DMA
net: prevent sign extension in dev_get_stats()
tcp: reset sk_rx_dst in tcp_disconnect()
net: ipv6: reset daddr and dport in sk if connect() fails
bnx2x: Don't log mc removal needlessly
bnxt_en: Fix netpoll handling.
bnxt_en: Add missing logic to handle TPA end error conditions.
...
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6332 488 308 7128 1bd8 kernel/power/hibernate.o
File size After adding 'const':
text data bss dec hex filename
6396 424 308 7128 1bd8 kernel/power/hibernate.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:
0: (b7) r0 = 0
1: (18) r2 = 0xffff897e82304400
3: (7b) *(u64 *)(r1 +48) = r2
R2 leaks addr into ctx
Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:
0: (b7) r0 = 0
1: (7b) *(u64 *)(r1 +48) = r0
2: (18) r2 = 0xffff897e82304400 ; map
4: (db) lock *(u64 *)(r1 +48) += r2
5: (95) exit
We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:
0: (bf) r6 = r1
1: (7a) *(u64 *)(r10 -8) = 0
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x0
6: (85) call bpf_map_lookup_elem#1
7: (15) if r0 == 0x0 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
8: (b7) r3 = 0
9: (7b) *(u64 *)(r0 +0) = r3
10: (db) lock *(u64 *)(r0 +0) += r6
11: (b7) r0 = 0
12: (95) exit
from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
11: (b7) r0 = 0
12: (95) exit
Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.
Fixes: 1be7f75d16 ("bpf: enable non-root eBPF programs")
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The index is off-by-one when fp->aux->stack_depth
has already been rounded up to 32. In particular,
if stack_depth is 512, the index will be 16.
The fix is to round_up and then takes -1 instead of round_down.
[ 22.318680] ==================================================================
[ 22.319745] BUG: KASAN: global-out-of-bounds in bpf_prog_select_runtime+0x48a/0x670
[ 22.320737] Read of size 8 at addr ffffffff82aadae0 by task sockex3/1946
[ 22.321646]
[ 22.321858] CPU: 1 PID: 1946 Comm: sockex3 Tainted: G W 4.12.0-rc6-01680-g2ee87db3a287 #22
[ 22.323061] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014
[ 22.324260] Call Trace:
[ 22.324612] dump_stack+0x67/0x99
[ 22.325081] print_address_description+0x1e8/0x290
[ 22.325734] ? bpf_prog_select_runtime+0x48a/0x670
[ 22.326360] kasan_report+0x265/0x350
[ 22.326860] __asan_report_load8_noabort+0x19/0x20
[ 22.327484] bpf_prog_select_runtime+0x48a/0x670
[ 22.328109] bpf_prog_load+0x626/0xd40
[ 22.328637] ? __bpf_prog_charge+0xc0/0xc0
[ 22.329222] ? check_nnp_nosuid.isra.61+0x100/0x100
[ 22.329890] ? __might_fault+0xf6/0x1b0
[ 22.330446] ? lock_acquire+0x360/0x360
[ 22.331013] SyS_bpf+0x67c/0x24d0
[ 22.331491] ? trace_hardirqs_on+0xd/0x10
[ 22.332049] ? __getnstimeofday64+0xaf/0x1c0
[ 22.332635] ? bpf_prog_get+0x20/0x20
[ 22.333135] ? __audit_syscall_entry+0x300/0x600
[ 22.333770] ? syscall_trace_enter+0x540/0xdd0
[ 22.334339] ? exit_to_usermode_loop+0xe0/0xe0
[ 22.334950] ? do_syscall_64+0x48/0x410
[ 22.335446] ? bpf_prog_get+0x20/0x20
[ 22.335954] do_syscall_64+0x181/0x410
[ 22.336454] entry_SYSCALL64_slow_path+0x25/0x25
[ 22.337121] RIP: 0033:0x7f263fe81f19
[ 22.337618] RSP: 002b:00007ffd9a3440c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 22.338619] RAX: ffffffffffffffda RBX: 0000000000aac5fb RCX: 00007f263fe81f19
[ 22.339600] RDX: 0000000000000030 RSI: 00007ffd9a3440d0 RDI: 0000000000000005
[ 22.340470] RBP: 0000000000a9a1e0 R08: 0000000000a9a1e0 R09: 0000009d00000001
[ 22.341430] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000010000
[ 22.342411] R13: 0000000000a9a023 R14: 0000000000000001 R15: 0000000000000003
[ 22.343369]
[ 22.343593] The buggy address belongs to the variable:
[ 22.344241] interpreters+0x80/0x980
[ 22.344708]
[ 22.344908] Memory state around the buggy address:
[ 22.345556] ffffffff82aad980: 00 00 00 04 fa fa fa fa 04 fa fa fa fa fa fa fa
[ 22.346449] ffffffff82aada00: 00 00 00 00 00 fa fa fa fa fa fa fa 00 00 00 00
[ 22.347361] >ffffffff82aada80: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
[ 22.348301] ^
[ 22.349142] ffffffff82aadb00: 00 01 fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[ 22.350058] ffffffff82aadb80: 00 00 07 fa fa fa fa fa 00 00 05 fa fa fa fa fa
[ 22.350984] ==================================================================
Fixes: b870aa901f ("bpf: use different interpreter depending on required stack size")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows userspace to do BPF_MAP_LOOKUP_ELEM on
BPF_MAP_TYPE_PROG_ARRAY,
BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS.
The lookup returns a prog-id or map-id to the userspace.
The userspace can then use the BPF_PROG_GET_FD_BY_ID
or BPF_MAP_GET_FD_BY_ID to get a fd.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing the following command:
# echo ":mod:kvm_intel" > /sys/kernel/tracing/stack_trace_filter
it triggered a crash.
This happened with the clean up of probes. It required all callers to the
regex function (doing ftrace filtering) to have ops->private be a pointer to
a trace_array. But for the stack tracer, that is not the case.
Allow for the ops->private to be NULL, and change the function command
callbacks to handle the trace_array pointer being NULL as well.
Fixes: d2afd57a4b ("tracing/ftrace: Allow instances to have their own function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This can be accomplished by making blacklisted() also accept const.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
[jeyu: fix typo]
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Stephen reported the following build warning in UP:
kernel/sched/fair.c:2657:9: warning: 'struct sched_domain' declared inside
parameter list
^
/home/sfr/next/next/kernel/sched/fair.c:2657:9: warning: its scope is only this
definition or declaration, which is probably not what you want
Hide the numa_wake_affine() inline stub on UP builds to get rid of it.
Fixes: 3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
The timers cpu base lock could not be converted to a raw spinlock becaue
the lock held time was non-deterministic due to cascading and long lasting
timer wheel traversals.
The rework of the timer wheel to the new non-cascading model removed also
the wheel traversals and the lock held times are deterministic now. This
allows to make the lock raw and thereby unbreaks NOHz* on preempt-RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20170627161538.30257-1-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently, cgroup only supports delegation to !root users and cgroup
namespaces don't get any special treatments. This limits the
usefulness of cgroup namespaces as they by themselves can't be safe
delegation boundaries. A process inside a cgroup can change the
resource control knobs of the parent in the namespace root and may
move processes in and out of the namespace if cgroups outside its
namespace are visible somehow.
This patch adds a new mount option "nsdelegate" which makes cgroup
namespaces delegation boundaries. If set, cgroup behaves as if write
permission based delegation took place at namespace boundaries -
writes to the resource control knobs from the namespace root are
denied and migration crossing the namespace boundary aren't allowed
from inside the namespace.
This allows cgroup namespace to function as a delegation boundary by
itself.
v2: Silently ignore nsdelegate specified on !init mounts.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Aravind Anbudurai <aru7@fb.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Restructure cgroup_procs_write_permission() to make extending
permission logic easier.
This patch doesn't cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Init boot up functions may be traced, but they are also freed when the
kernel finishes booting. These are removed from the ftrace tables, and the
debug variable for dyn_ftrace_total_info needs to reflect that as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the new_hash fails to allocate, then unlock the hash mutex on error.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When checking if we want to allow a kmod thread to kick off we increment,
then read to see if we should enable a thread. If we were over the allowed
limit limit we decrement. Splitting the increment far apart from decrement
means there could be a time where two increments happen potentially
giving a false failure on a thread which should have been allowed.
CPU1 CPU2
atomic_inc()
atomic_inc()
atomic_read()
atomic_read()
atomic_dec()
atomic_dec()
In this case a read on CPU1 gets the atomic_inc()'s and we could negate
it from getting a kmod thread. We could try to prevent this with a lock
or preemption but that is overkill. We can fix by reducing the number of
atomic operations. We do this by inverting the logic of of the enabler,
instead of incrementing kmod_concurrent as we get new kmod users, define the
variable kmod_concurrent_max as the max number of currently allowed kmod
users and as we get new kmod users just decrement it if its still positive.
This combines the dec and read in one atomic operation.
In this case we no longer get the same false failure:
CPU1 CPU2
atomic_dec_if_positive()
atomic_dec_if_positive()
atomic_inc()
atomic_inc()
The number of threads is computed at init, and since the current computation
of kmod_concurrent includes the thread count we can avoid setting
kmod_concurrent_max later in boot through an init call by simply sticking to
50 as the kmod_concurrent_max. The assumption here is a system with modules
must at least have ~16 MiB of RAM.
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The module list has been using RCU in a lot of other calls
for a while now, we just overlooked changing this one over to
use RCU.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Earlier patches introduced ability to record the tgid using the 'record-tgid'
option. Here we read the tgid and output it if the option is enabled.
Link: http://lkml.kernel.org/r/20170626053844.5746-3-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Inorder to support recording of tgid, the following changes are made:
* Introduce a new API (tracing_record_taskinfo) to additionally record the tgid
along with the task's comm at the same time. This has has the benefit of not
setting trace_cmdline_save before all the information for a task is saved.
* Add a new API tracing_record_taskinfo_sched_switch to record task information
for 2 tasks at a time (previous and next) and use it from sched_switch probe.
* Preserve the old API (tracing_record_cmdline) and create it as a wrapper
around the new one so that existing callers aren't affected.
* Reuse the existing sched_switch and sched_wakeup probes to record tgid
information and add a new option 'record-tgid' to enable recording of tgid
When record-tgid option isn't enabled to being with, we take care to make sure
that there's isn't memory or runtime overhead.
Link: http://lkml.kernel.org/r/20170627020155.5139-1-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The dyn_ftrace_total_info file is used to show how many functions have been
converted into nops and can be used by ftrace. The problem is that it does
not get decremented when functions are removed (init boot code being freed,
and modules being freed). That means the number is very inaccurate everytime
functions are removed from the ftrace tables. Decrement it when functions
are removed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace_arch_read_dyn_info() was used so that archs could add its own debug
information into the dyn_ftrace_total_info in the tracefs file system. That
file is for debugging usage of dynamic ftrace. No arch uses that function
anymore, so just get rid of it.
This also allows for tracing_read_dyn_info() to be cleaned up a bit.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The first parameter of swsusp_alloc is not used, so drop it.
Signed-off-by: BaoJun Luo <baojun.luo@samsung.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kbuild reported a build failure when CONFIG_STRICT_KERNEL_RWX was
enabled on powerpc. We don't yet have ARCH_HAS_SET_MEMORY and ppc32
saw a build failure.
I've only done a basic compile test with a config that has
hibernation enabled.
Fixes: 50327ddfbc (kernel/power/snapshot.c: use set_memory.h header)
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This switches the seccomp usage tracking from atomic_t to refcount_t to
gain refcount overflow protections.
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Hans Liljestrand <hans.liljestrand@aalto.fi>
Signed-off-by: Kees Cook <keescook@chromium.org>
When a module filter is added to set_ftrace_filter, if the module is not
loaded, it is cached. This should be considered an active filter, and
function tracing should be filtered by this. That is, if a cached module
filter is the only filter set, then no function tracing should be happening,
as all the functions available will be filtered out.
This makes sense, as the reason to add a cached module filter, is to trace
the module when you load it. There shouldn't be any other tracing happening
until then.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a module is cached in the set_ftrace_filter, and that module is loaded,
then enable tracing on that module as if the cached module text was written
into set_ftrace_filter just as the module is loaded.
# echo ":mod:kvm_intel" >
# cat /sys/kernel/tracing/set_ftrace_filter
#### all functions enabled ####
:mod:kvm_intel
# modprobe kvm_intel
# cat /sys/kernel/tracing/set_ftrace_filter
vmx_get_rflags [kvm_intel]
vmx_get_pkru [kvm_intel]
vmx_get_interrupt_shadow [kvm_intel]
vmx_rdtscp_supported [kvm_intel]
vmx_invpcid_supported [kvm_intel]
[..]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When writing in a module filter into set_ftrace_filter for a module that is
not yet loaded, it it cached, and will be executed when the module is loaded
(although that is not implemented yet at this commit). Display the list of
cached modules to be traced.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This is the start of the infrastructure work to allow for tracing module
functions before it is loaded.
Currently the following command:
# echo :mod:some-mod > set_ftrace_filter
will enable tracing of all functions within the module "some-mod" if it is
loaded. What we want, is if the module is not loaded, that line will be
saved. When the module is loaded, then the "some-mod" will have that line
executed on it, so that the functions within it starts being traced.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch fix the following warning:
kernel/module.c: In function 'add_usage_links':
kernel/module.c:1653:6: warning: variable 'nowarn' set but not used [-Wunused-but-set-variable]
[jeyu: folded in first patch since it only swapped the function order
so that del_usage_links can be called from add_usage_links]
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
These apis only need to be defined if CONFIG_COMPAT is
enabled.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As we change the user space type for the timerfd and posix timer
functions to newer data types, we need some form of conversion
helpers to avoid duplicating that logic.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add helper functions to convert between struct timespec64 and
struct timespec at userspace boundaries.
This is a preparatory patch to use timespec64 as the basic type
internally in the kernel as timespec is not y2038 safe on 32 bit systems.
The patch helps the cause by containing all data conversions at the
userspace boundaries within these functions.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull timer fixes from Thomas Gleixner:
"A few fixes for timekeeping and timers:
- Plug a subtle race due to a missing READ_ONCE() in the timekeeping
code where reloading of a pointer results in an inconsistent
callback argument being supplied to the clocksource->read function.
- Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
time keeping core code, to prevent a possible discontuity.
- Apply a similar fix to the arm64 vdso clock_gettime()
implementation
- Add missing includes to clocksource drivers, which relied on
indirect includes which fails in certain configs.
- Use the proper iomem pointer for read/iounmap in a probe function"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
time: Fix clock->read(clock) race around clocksource changes
clocksource: Explicitly include linux/clocksource.h when needed
clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:
- Return the proper error code if aux buffers for a event are not
supported.
- Calculate the probe offset for inlined functions correctly
- Update the Skylake DTLB load/store miss event so it can count 1G
TLB entries as well"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Fix probe definition for inlined functions
perf/x86/intel: Add 1G DTLB load/store miss support for SKL
perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
An interrupt behaves with a burst of activity with periodic interval of time
followed by one or two peaks of longer interval.
As the time intervals are periodic, statistically speaking they follow a normal
distribution and each interrupts can be tracked individually.
Add a mechanism to compute the statistics on all interrupts, except the
timers which are deterministic from a prediction point of view, as their
expiry time is known.
The goal is to extract the periodicity for each interrupt, with the last
timestamp and sum them, so the next event can be predicted to a certain
extent.
Taking the earliest prediction gives the expected wakeup on the system
(assuming a timer won't expire before).
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org
The interrupt framework gives a lot of information about each interrupt. It
does not keep track of when those interrupts occur though, which is a
prerequisite for estimating the next interrupt arrival for power management
purposes.
Add a mechanism to record the timestamp for each interrupt occurrences in a
per-CPU circular buffer to help with the prediction of the next occurrence
using a statistical model.
Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the
current value of IRQ_TIMINGS_SIZE is 32.
Each event is encoded into a single u64, where the high 48 bits are used
for the timestamp and the low 16 bits are for the irq number.
A static key is introduced so when the irq prediction is switched off at
runtime, the overhead is near to zero.
It results in most of the code in internals.h for inline reasons and a very
few in the new file timings.c. The latter will contain more in the next patch
which will provide the statistical model for the next event prediction.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
debugfs_remove() has it's own NULL pointer check. Remove the conditional
and make irq_remove_debugfs_entry() an inline helper
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull timer fix from Eric Biederman:
"This fixes an issue of confusing injected signals with the signals
from posix timers that has existed since posix timers have been in the
kernel.
This patch is slightly simpler than my earlier version of this patch
as I discovered in testing that I had misspelled "#ifdef
CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
setting of resched_timer uncondtional.
I have tested this and verified that without this patch there is a
nasty hang that is easy to trigger, and with this patch everything
works properly"
Thomas Gleixner dixit:
"It fixes the problem at hand and covers the ptrace case as well, which
I missed.
Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Only reschedule timers on signals timers have sent
The effective_load() function was only used by the NUMA balancing
code, and not by the regular load balancing code. Now that the
NUMA balancing code no longer uses it either, get rid of it.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jhladky@redhat.com
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20170623165530.22514-5-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since select_idle_sibling() can place a task anywhere on a socket,
comparing loads between individual CPU cores makes no real sense
for deciding whether to do an affine wakeup across sockets, either.
Instead, compare the load between the sockets in a similar way the
load balancer and the numa balancing code do.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jhladky@redhat.com
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20170623165530.22514-4-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Then 'this_cpu' and 'prev_cpu' are in the same socket, select_idle_sibling()
will do its thing regardless of the return value of wake_affine().
Just return true and don't look at all the other things.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jhladky@redhat.com
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20170623165530.22514-3-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Several tests in the NAS benchmark seem to run a lot slower with
NUMA balancing enabled, than with NUMA balancing disabled. The
slower run time corresponds with increased idle time.
Overriding the final test of migrate_degrades_locality (but still
doing the other NUMA tests first) seems to improve performance
of those benchmarks.
Reported-by: Jirka Hladky <jhladky@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20170623165530.22514-2-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 31fd85816d ("bpf: permits narrower load from bpf program
context fields") permits narrower load for certain ctx fields.
The commit however will already generate a masking even if
the prog-specific ctx conversion produces the result with
narrower size.
For example, for __sk_buff->protocol, the ctx conversion
loads the data into register with 2-byte load.
A narrower 2-byte load should not generate masking.
For __sk_buff->vlan_present, the conversion function
set the result as either 0 or 1, essentially a byte.
The narrower 2-byte or 1-byte load should not generate masking.
To avoid unnecessary masking, prog-specific *_is_valid_access
now passes converted_op_size back to verifier, which indicates
the valid data width after perceived future conversion.
Based on this information, verifier is able to avoid
unnecessary marking.
Since we want more information back from prog-specific
*_is_valid_access checking, all of them are packed into
one data structure for more clarity.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helps making sched/core.c smaller and hopefully easier to understand and maintain.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170621182203.30626-3-nicolas.pitre@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This helps making sched/core.c smaller and hopefully easier to understand and maintain.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170621182203.30626-2-nicolas.pitre@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make CONFIG_CPUSETS=y depend on SMP as this feature makes no sense
on UP. This allows for configuring out cpuset_cpumask_can_shrink()
and task_can_attach() entirely, which shrinks the kernel a bit.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170614171926.8345-2-nicolas.pitre@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It did seem like a good idea at the time, but it never really
caught on, and auto-recursive domains remain unused 3 years after
having been introduced.
Oh well, time for a late spring cleanup.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We can have irq domains that are identified by the same fwnode
(because they are serviced by the same HW), and yet have different
functionnality (because they serve different busses, for example).
This is what we use the bus_token field.
Since we don't use this field when generating the domain name,
all the aliasing domains will get the same name, and the debugfs
file creation fails. Also, bus_token is updated by individual drivers,
and the core code is unaware of that update.
In order to sort this mess, let's introduce a helper that takes care
of updating bus_token, and regenerate the debugfs file.
A separate patch will update all the individual users.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently the irq vector spread algorithm is restricted to online CPUs,
which ties the IRQ mapping to the currently online devices and doesn't deal
nicely with the fact that CPUs could come and go rapidly due to e.g. power
management.
Instead assign vectors to all present CPUs to avoid this churn.
Build a map of all possible CPUs for a given node, as the architectures
only provide a map of all onlines CPUs. Do this dynamically on each call
for the vector assingments, which is a bit suboptimal and could be
optimized in the future by provinding a mapping from the arch code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-nvme@lists.infradead.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170603140403.27379-5-hch@lst.de
Avoid trying to add a newly online CPU to the effective affinity mask of an
started up interrupt. That interrupt will either stay on the already online
CPU or move around for no value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.431321047@linutronix.de
Many interrupt chips allow only a single CPU as interrupt target. The core
code has no knowledge about that. That's unfortunate as it could avoid
trying to readd a newly online CPU to the effective affinity mask.
Add the status flag and the necessary accessors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.352343969@linutronix.de
If a CPU goes offline, interrupts affine to the CPU are moved away. If the
outgoing CPU is the last CPU in the affinity mask the migration code breaks
the affinity and sets it it all online cpus.
This is a problem for affinity managed interrupts as CPU hotplug is often
used for power management purposes. If the affinity is broken, the
interrupt is not longer affine to the CPUs to which it was allocated.
The affinity spreading allows to lay out multi queue devices in a way that
they are assigned to a single CPU or a group of CPUs. If the last CPU goes
offline, then the queue is not longer used, so the interrupt can be
shutdown gracefully and parked until one of the assigned CPUs comes online
again.
Add a graceful shutdown mechanism into the irq affinity breaking code path,
mark the irq as MANAGED_SHUTDOWN and leave the affinity mask unmodified.
In the online path, scan the active interrupts for managed interrupts and
if the interrupt is functional and the newly online CPU is part of the
affinity mask, restart the interrupt if it is marked MANAGED_SHUTDOWN or if
the interrupts is started up, try to add the CPU back to the effective
affinity mask.
Originally-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619235447.273417334@linutronix.de
Affinity managed interrupts should keep their assigned affinity accross CPU
hotplug. To avoid magic hackery in device drivers, the core code shall
manage them transparently and set these interrupts into a managed shutdown
state when the last CPU of the assigned affinity mask goes offline. The
interrupt will be restarted when one of the CPUs in the assigned affinity
mask comes back online.
Add the necessary logic to irq_startup(). If an interrupt is requested and
started up, the code checks whether it is affinity managed and if so, it
checks whether a CPU in the interrupts affinity mask is online. If not, it
puts the interrupt into managed shutdown state.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.189851170@linutronix.de
In order to handle managed interrupts gracefully on irq_startup() so they
won't lose their assigned affinity, it's necessary to allow startups which
keep the interrupts in managed shutdown state, if none of the assigend CPUs
is online. This allows drivers to request interrupts w/o the CPUs being
online, which avoid online/offline churn in drivers.
Add a force argument which can override that decision and let only
request_irq() and enable_irq() allow the managed shutdown
handling. enable_irq() is required, because the interrupt might be
requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which
would then wreckage the assignment again. All other callers force startup
and potentially break the assigned affinity.
No functional change as this only adds the function argument.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
Split out the inner workings of irq_startup() so it can be reused to handle
managed interrupts gracefully.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.033235144@linutronix.de
Affinity managed interrupts should keep their assigned affinity accross CPU
hotplug. To avoid magic hackery in device drivers, the core code shall
manage them transparently. This will set these interrupts into a managed
shutdown state when the last CPU of the assigned affinity mask goes
offline. The interrupt will be restarted when one of the CPUs in the
assigned affinity mask comes back online.
Introduce the necessary state flag and the accessor functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.954523476@linutronix.de
If the architecture supports the effective affinity mask, migrating
interrupts away which are not targeted by the effective mask is
pointless.
They can stay in the user or system supplied affinity mask, but won't be
targetted at any given point as the affinity setter functions need to
validate against the online cpu mask anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.328488490@linutronix.de
There is currently no way to evaluate the effective affinity mask of a
given interrupt. Many irq chips allow only a single target CPU or a subset
of CPUs in the affinity mask.
Updating the mask at the time of setting the affinity to the subset would
be counterproductive because information for cpu hotplug about assigned
interrupt affinities gets lost. On CPU hotplug it's also pointless to force
migrate an interrupt, which is not targeted at the CPU effectively. But
currently the information is not available.
Provide a seperate mask to be updated by the irq_chip->irq_set_affinity()
implementations. Implement the read only proc files so the user can see the
effective mask as well w/o trying to deduce it from /proc/interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.247834245@linutronix.de
The proc file setup repeats the same ugly type cast for the irq number over
and over. Do it once and hand in the local void pointer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.160866358@linutronix.de
All callers hand in GPF_KERNEL. No point to have an extra argument for
that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.082544752@linutronix.de
The third argument of the internal helper function is unused. Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.004958600@linutronix.de
Now that x86 uses the generic code, the function declaration and inline
stub can move to the core internal header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.928156166@linutronix.de
Set the force migration flag when migrating interrupts away from an
outgoing CPU.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.681874648@linutronix.de
Interrupts which cannot be migrated in process context, need to be masked
before the affinity is changed forcefully.
Add support for that. Will be compiled out for architectures which do not
have this x86 specific issue.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.604565591@linutronix.de
In order to move x86 to the generic hotplug migration code, add support for
cleaning up move in progress bits.
On architectures which have this x86 specific (mis)feature not enabled,
this is optimized out by the compiler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.525817311@linutronix.de
Interrupts, which are shut down are tried to be migrated as well. That's
pointless because the interrupt cannot fire and the next startup will move
it to the proper place anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.447550992@linutronix.de
Move the checks for a valid irq chip and the irq_set_affinity() callback
right in front of the whole migration logic. No point in doing a gazillion
of other things when the interrupt cannot be migrated at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.354181630@linutronix.de
In case the affinity of an interrupt was broken, a printk is emitted.
But if the affinity cannot be set at all due to a missing
irq_set_affinity() callback or due to a failing callback, the message is
still printed preceeded by a warning/error.
That makes no sense whatsoever.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.274852976@linutronix.de
This is called from stop_machine() with interrupts disabled. No point in
disabling them some more.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.198042748@linutronix.de
So that the affinity code can reuse them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619235445.109426284@linutronix.de
The startup vs. setaffinity ordering of interrupts depends on the
IRQF_NOAUTOEN flag. Chained interrupts are not getting any affinity
assignment at all.
A regular interrupt is started up and then the affinity is set. A
IRQF_NOAUTOEN marked interrupt is not started up, but the affinity is set
nevertheless.
Move the affinity setup to startup_irq() so the ordering is always the same
and chained interrupts get the proper default affinity assigned as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.020534783@linutronix.de
Rename it with a proper irq_ prefix and make it available for other files
in the core code. Preparatory patch for moving the irq affinity setup
around.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.928501004@linutronix.de
No point to have this alloc/free dance of cpumasks. Provide a static mask
for setup_affinity() and protect it proper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.851571573@linutronix.de
If an CPU goes offline, the interrupts are migrated away, but a eventually
pending interrupt move, which has not yet been made effective is kept
pending even if the outgoing CPU is the sole target of the pending affinity
mask. What's worse is, that the pending affinity mask is discarded even if
it would contain a valid subset of the online CPUs.
Implement a helper function which allows to avoid these issues.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.691345468@linutronix.de
Debugging (hierarchical) interupt domains is tedious as there is no
information about the hierarchy and no information about states of
interrupts in the various domain levels.
Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'.
The domains directory contains the domain files. The content is information
about the domain. If the domain is part of a hierarchy then the parent
domains are printed as well.
# ls /sys/kernel/debug/irq/domains/
default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI
DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1
INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR
INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT
# cat /sys/kernel/debug/irq/domains/VECTOR
name: VECTOR
size: 0
mapped: 216
flags: 0x00000041
# cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0
name: IO-APIC-IR-0
size: 24
mapped: 19
flags: 0x00000041
parent: INTEL-IR-3
name: INTEL-IR-3
size: 65536
mapped: 167
flags: 0x00000041
parent: VECTOR
name: VECTOR
size: 0
mapped: 216
flags: 0x00000041
Unfortunately there is no per cpu information about the VECTOR domain (yet).
The irqs directory contains detailed information about mapped interrupts.
# cat /sys/kernel/debug/irq/irqs/3
handler: handle_edge_irq
status: 0x00004000
istate: 0x00000000
ddepth: 1
wdepth: 0
dstate: 0x01018000
IRQD_IRQ_DISABLED
IRQD_SINGLE_TARGET
IRQD_MOVE_PCNTXT
node: 0
affinity: 0-143
effectiv: 0
pending:
domain: IO-APIC-IR-0
hwirq: 0x3
chip: IR-IO-APIC
flags: 0x10
IRQCHIP_SKIP_SET_WAKE
parent:
domain: INTEL-IR-3
hwirq: 0x20000
chip: INTEL-IR
flags: 0x0
parent:
domain: VECTOR
hwirq: 0x3
chip: APIC
flags: 0x0
This was developed to simplify the debugging of the managed affinity
changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a map counter instead of counting radix tree entries for
diagnosis. That also gives correct information for linear domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.459397746@linutronix.de
In order to provide proper debug interface it's required to have domain
names available when the domain is added. Non fwnode based architectures
like x86 have no way to do so.
It's not possible to use domain ops or host data for this as domain ops
might be the same for several instances, but the names have to be unique.
Extend the irqchip fwnode to allow transporting the domain name. If no node
is supplied, create a 'unknown-N' placeholder.
Warn if an invalid node is supplied and treat it like no node. This happens
e.g. with i2 devices on x86 which hand in an ACPI type node which has no
interface for retrieving the name.
[ Folded a fix from Marc to make DT name parsing work ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235443.588784933@linutronix.de
Prevent overwriting an already assigned domain name. Remove the extra check
for chip->name, because if domain->name is NULL overwriting it with NULL is
not a problem.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235443.510684976@linutronix.de
Although idle load balancing obviously only concerns idle CPUs, it can
be a disturbance on a busy nohz_full CPU. Indeed a CPU can only get rid
of an idle load balancing duty once a tick fires while it runs a task
and this can take a while on a nohz_full CPU.
We could fix that and escape the idle load balancing duty from the very
idle exit path but that would bring unecessary overhead. Lets just not
bother and leave that job to housekeeping CPUs (those outside nohz_full
range). The nohz_full CPUs simply don't want any disturbance.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497838322-10913-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The idle load balancing registration path assumes that we only stop the
tick when the CPU is idle, ignoring the nohz full case. As a result, a
nohz full CPU that is running a task may be chosen to perform idle load
balancing.
Lets make sure that only CPUs in dynticks idle mode can be picked as
idle load balancers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497838322-10913-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The loadavg naming code still assumes that nohz == idle whereas its code
is actually handling well both nohz idle and nohz full.
So lets fix the naming according to what the code actually does, to
unconfuse the reader.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497838322-10913-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull livepatching fix from Jiri Kosina:
"Fix the way how livepatches are being stacked with respect to RCU,
from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Fix stacking of patches with respect to RCU
If the event for which an AUX area is about to be allocated, does
not support setting up an AUX area, rb_alloc_aux() return -ENOTSUPP.
This error condition is being returned unfiltered to the user space,
and, for example, the perf tools fails with:
failed to mmap with 524 (INTERNAL ERROR: strerror_r(524, 0x3fff497a1c8, 512)=22)
This error can be easily seen with "perf record -m 128,256 -e cpu-clock".
The 524 error code maps to -ENOTSUPP (in rb_alloc_aux()). The -ENOTSUPP
error code shall be only used within the kernel. So the correct error
code would then be -EOPNOTSUPP.
With this commit, the perf tool then reports:
failed to mmap with 95 (Operation not supported)
which is more clear.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: acme@kernel.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/1497954399-6355-1-git-send-email-brueckner@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge time(keeping) updates from John Stultz:
"Just a small set of changes, the biggest changes being the MONOTONIC_RAW
handling cleanup, and a new kselftest from Miroslav. Also a a clear
warning deprecating CONFIG_GENERIC_TIME_VSYSCALL_OLD, which affects ppc
and ia64."
CONFIG_GENERIC_TIME_VSYSCALL_OLD was introduced five years ago
to allow a transition from the old vsyscall implementations to
the new method (which simplified internal accounting and made
timekeeping more precise).
However, PPC and IA64 have yet to make the transition, despite
in some cases me sending test patches to try to help it along.
http://patches.linaro.org/patch/30501/http://patches.linaro.org/patch/35412/
If its helpful, my last pass at the patches can be found here:
https://git.linaro.org/people/john.stultz/linux.git dev/oldvsyscall-cleanup
So I think its time to set a deadline and make it clear this
is going away. So this patch adds warnings about this
functionality being dropped. Likely to be in v4.15.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Now that we fixed the sub-ns handling for CLOCK_MONOTONIC_RAW,
remove the duplicitive tk->raw_time.tv_nsec, which can be
stored in tk->tkr_raw.xtime_nsec (similarly to how its handled
for monotonic time).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Daniel Mentz <danielmentz@google.com>
Tested-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The expiry time of a posix cpu timer is supplied through sys_timer_set()
via a struct timespec. The timespec is validated for correctness.
In the actual set timer implementation the timespec is converted to a
scalar nanoseconds value. If the tv_sec part of the time spec is large
enough the conversion to nanoseconds (sec * NSEC_PER_SEC) overflows 64bit.
Mitigate that by using the timespec_to_ktime() conversion function, which
checks the tv_sec part for a potential mult overflow and clamps the result
to KTIME_MAX, which is about 292 years.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170620154113.588276707@linutronix.de
The expiry time of a itimer is supplied through sys_setitimer() via a
struct timeval. The timeval is validated for correctness.
In the actual set timer implementation the timeval is converted to a
scalar nanoseconds value. If the tv_sec part of the time spec is large
enough the conversion to nanoseconds (sec * NSEC_PER_SEC) overflows 64bit.
Mitigate that by using the timeval_to_ktime() conversion function, which
checks the tv_sec part for a potential mult overflow and clamps the result
to KTIME_MAX, which is about 292 years.
Reported-by: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170620154113.505981643@linutronix.de
This function was introduced by:
150593bf86 ("sched/api: Introduce task_rcu_dereference() and try_get_task_struct()")
... to allow easier usage of task_rcu_dereference(), however no users
were ever added. Drop the helper.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/20170615023730.22827-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
kernel/sched/Makefile
Pick up the waitqueue related renames - it didn't get much feedback,
so it appears to be uncontroversial. Famous last words? ;-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If we set a next or last buddy for a se that is not on_rq, we will
end up taking a NULL pointer dereference in wakeup_preempt_entity
via pick_next_task_fair.
Detect when we would be about to do that, throw a warning and
then refuse to actually set it.
This has been suggested at least twice:
https://marc.info/?l=linux-kernel&m=146651668921468&w=2https://lkml.org/lkml/2016/6/16/663
I recently had to debug a problem with these (we hadn't backported
Konstantin's patches in this area) and this would have saved a lot
of time/pain.
Just do it.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Cc: Ben Segall <bsegall@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170510201139.16236-1-dja@axtens.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This definition of SCHED_WARN_ON():
#define SCHED_WARN_ON(x) ((void)(x))
is not fully compatible with the 'real' WARN_ON_ONCE() primitive, as it
has no return value, so it cannot be used in conditionals.
Fix it.
Cc: Daniel Axtens <dja@axtens.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.
Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.
To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:
struct wait_queue_head::task_list => ::head
struct wait_queue_entry::task_list => ::entry
For example, this code:
rqw->wait.task_list.next != &wait->task_list
... is was pretty unclear (to me) what it's doing, while now it's written this way:
rqw->wait.head.next != &wait->entry
... which makes it pretty clear that we are iterating a list until we see the head.
Other examples are:
list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
list_for_each_entry(wq, &fence->wait.task_list, task_list) {
... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:
list_for_each_entry_safe(pos, next, &x->head, entry) {
list_for_each_entry(wq, &fence->wait.head, entry) {
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The key hashed waitqueue data structures and their initialization
was done in the main scheduler file for no good reason, move them
to sched/wait_bit.c instead.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The wait_bit*() types and APIs are mixed into wait.h, but they
are a pretty orthogonal extension of wait-queues.
Furthermore, only about 50 kernel files use these APIs, while
over 1000 use the regular wait-queue functionality.
So clean up the main wait.h by moving the wait-bit functionality
out of it, into a separate .h and .c file:
include/linux/wait_bit.h for types and APIs
kernel/sched/wait_bit.c for the implementation
Update all header dependencies.
This reduces the size of wait.h rather significantly, by about 30%.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So wait-bit-queue head variables are often named:
struct wait_bit_queue *q
... which is a bit ambiguous and super confusing, because
they clearly suggest wait-queue head semantics and behavior
(they rhyme with the old wait_queue_t *q naming), while they
are extended wait-queue _entries_, not heads!
They are misnomers in two ways:
- the 'wait_bit_queue' leaves open the question of whether
it's an entry or a head
- the 'q' parameter and local variable naming falsely implies
that it's a 'queue' - while it's an entry.
This resulted in sometimes confusing cases such as:
finish_wait(wq, &q->wait);
where the 'q' is not a wait-queue head, but a wait-bit-queue entry.
So improve this all by standardizing wait-bit-queue nomenclature
similar to wait-queue head naming:
struct wait_bit_queue => struct wait_bit_queue_entry
q => wbq_entry
Which makes it all a much clearer:
struct wait_bit_queue_entry *wbq_entry
... and turns the former confusing piece of code into:
finish_wait(wq_head, &wbq_entry->wq_entry;
which IMHO makes it apparently clear what we are doing,
without having to analyze the context of the code: we are
adding a wait-queue entry to a regular wait-queue head,
which entry is embedded in a wait-bit-queue entry.
I'm not a big fan of acronyms, but repeating wait_bit_queue_entry
in field and local variable names is too long, so Hopefully it's
clear enough that 'wq_' prefixes stand for wait-queues, while
'wbq_' prefixes stand for wait-bit-queues.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename 'struct wait_bit_queue::wait' to ::wq_entry, to more clearly
name it as a wait-queue entry.
Propagate it to a couple of usage sites where the wait-bit-queue internals
are exposed.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The wait-queue head parameters and variables are named in a
couple of ways, we have the following variants currently:
wait_queue_head_t *q
wait_queue_head_t *wq
wait_queue_head_t *head
In particular the 'wq' naming is ambiguous in the sense whether it's
a wait-queue head or entry name - as entries were often named 'wait'.
( Not to mention the confusion of any readers coming over from
workqueue-land. )
Standardize all this around a single, unambiguous parameter and
variable name:
struct wait_queue_head *wq_head
which is easy to grep for and also rhymes nicely with the wait-queue
entry naming:
struct wait_queue_entry *wq_entry
Also rename:
struct __wait_queue_head => struct wait_queue_head
... and use this struct type to migrate from typedefs usage to 'struct'
usage, which is more in line with existing kernel practices.
Don't touch any external users and preserve the main wait_queue_head_t
typedef.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the various wait-queue entry variables in include/linux/wait.h
and kernel/sched/wait.c are named in a colorfully inconsistent
way:
wait_queue_entry_t *wait
wait_queue_entry_t *__wait (even in plain C code!)
wait_queue_entry_t *q (!)
wait_queue_entry_t *new (making anyone who knows C++ cringe)
wait_queue_entry_t *old
I think part of the reason for the inconsistency is the constant
apparent confusion about what a wait queue 'head' versus 'entry' is.
( Some of the documentation talks about a 'wait descriptor', which is
the wait-queue entry itself - further adding to the confusion. )
The most common name is 'wait', but that in itself is somewhat
ambiguous as well, as it does not really make it clear whether
it's a wait-queue entry or head.
To improve all this name the wait-queue entry structure parameters
and variables consistently and push through this naming into all
the wait.h and wait.c code:
struct wait_queue_entry *wq_entry
The 'wq_' prefix makes it easy to grep for, and we also use the
opportunity to move away from the typedef to a plain 'struct' naming:
in the kernel we typically reserve typedefs for cases where a
C structure is really small and somewhat opaque - such as pte_t.
wait-queue entries are neither small nor opaque, so use the more
standard 'struct xxx_entry' list management code nomenclature instead.
( We don't touch external users, and we preserve the typedef as well
for actual wait-queue users, to reduce unnecessary churn. )
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pi_mutex isn't supposed to be tracked by lockdep, but just
passing NULLs for name and key will cause lockdep to spew a
warning and die, which is not what we want it to do.
Skip lockdep initialization if the caller passed NULLs for
name and key, suggesting such initialization isn't desired.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f5694788ad ("rt_mutex: Add lockdep annotations")
Link: http://lkml.kernel.org/r/20170618140548.4763-1-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rcu_read_(un)lock(), list_*_rcu(), and synchronize_rcu() are used for a secure
access and manipulation of the list of patches that modify the same function.
In particular, it is the variable func_stack that is accessible from the ftrace
handler via struct ftrace_ops and klp_ops.
Of course, it synchronizes also some states of the patch on the top of the
stack, e.g. func->transition in klp_ftrace_handler.
At the same time, this mechanism guards also the manipulation of
task->patch_state. It is modified according to the state of the transition and
the state of the process.
Now, all this works well as long as RCU works well. Sadly livepatching might
get into some corner cases when this is not true. For example, RCU is not
watching when rcu_read_lock() is taken in idle threads. It is because they
might sleep and prevent reaching the grace period for too long.
There are ways how to make RCU watching even in idle threads, see
rcu_irq_enter(). But there is a small location inside RCU infrastructure when
even this does not work.
This small problematic location can be detected either before calling
rcu_irq_enter() by rcu_irq_enter_disabled() or later by rcu_is_watching().
Sadly, there is no safe way how to handle it. Once we detect that RCU was not
watching, we might see inconsistent state of the function stack and the related
variables in klp_ftrace_handler(). Then we could do a wrong decision, use an
incompatible implementation of the function and break the consistency of the
system. We could warn but we could not avoid the damage.
Fortunately, ftrace has similar problems and they seem to be solved well there.
It uses a heavy weight implementation of some RCU operations. In particular, it
replaces:
+ rcu_read_lock() with preempt_disable_notrace()
+ rcu_read_unlock() with preempt_enable_notrace()
+ synchronize_rcu() with schedule_on_each_cpu(sync_work)
My understanding is that this is RCU implementation from a stone age. It meets
the core RCU requirements but it is rather ineffective. Especially, it does not
allow to batch or speed up the synchronize calls.
On the other hand, it is very trivial. It allows to safely trace and/or
livepatch even the RCU core infrastructure. And the effectiveness is a not a
big issue because using ftrace or livepatches on productive systems is a rare
operation. The safety is much more important than a negligible extra load.
Note that the alternative implementation follows the RCU principles. Therefore,
we could and actually must use list_*_rcu() variants when manipulating the
func_stack. These functions allow to access the pointers in the right
order and with the right barriers. But they do not use any other
information that would be set only by rcu_read_lock().
Also note that there are actually two problems solved in ftrace:
First, it cares about the consistency of RCU read sections. It is being solved
the way as described and used in this patch.
Second, ftrace needs to make sure that nobody is inside the dynamic trampoline
when it is being freed. For this, it also calls synchronize_rcu_tasks() in
preemptive kernel in ftrace_shutdown().
Livepatch has similar problem but it is solved by ftrace for free.
klp_ftrace_handler() is a good guy and never sleeps. In addition, it is
registered with FTRACE_OPS_FL_DYNAMIC. It causes that
unregister_ftrace_function() calls:
* schedule_on_each_cpu(ftrace_sync) - always
* synchronize_rcu_tasks() - in preemptive kernel
The effect is that nobody is neither inside the dynamic trampoline nor inside
the ftrace handler after unregister_ftrace_function() returns.
[jkosina@suse.cz: reformat changelog, fix comment]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Due to how the MONOTONIC_RAW accumulation logic was handled,
there is the potential for a 1ns discontinuity when we do
accumulations. This small discontinuity has for the most part
gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW
in their vDSO clock_gettime implementation, we've seen failures
with the inconsistency-check test in kselftest.
This patch addresses the issue by using the same sub-ns
accumulation handling that CLOCK_MONOTONIC uses, which avoids
the issue for in-kernel users.
Since the ARM64 vDSO implementation has its own clock_gettime
calculation logic, this patch reduces the frequency of errors,
but failures are still seen. The ARM64 vDSO will need to be
updated to include the sub-nanosecond xtime_nsec values in its
calculation for this issue to be completely fixed.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Daniel Mentz <danielmentz@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "stable #4 . 8+" <stable@vger.kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In tests, which excercise switching of clocksources, a NULL
pointer dereference can be observed on AMR64 platforms in the
clocksource read() function:
u64 clocksource_mmio_readl_down(struct clocksource *c)
{
return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
}
This is called from the core timekeeping code via:
cycle_now = tkr->read(tkr->clock);
tkr->read is the cached tkr->clock->read() function pointer.
When the clocksource is changed then tkr->clock and tkr->read
are updated sequentially. The code above results in a sequential
load operation of tkr->read and tkr->clock as well.
If the store to tkr->clock hits between the loads of tkr->read
and tkr->clock, then the old read() function is called with the
new clock pointer. As a consequence the read() function
dereferences a different data structure and the resulting 'reg'
pointer can point anywhere including NULL.
This problem was introduced when the timekeeping code was
switched over to use struct tk_read_base. Before that, it was
theoretically possible as well when the compiler decided to
reload clock in the code sequence:
now = tk->clock->read(tk->clock);
Add a helper function which avoids the issue by reading
tk_read_base->clock once into a local variable clk and then issue
the read function via clk->read(clk). This guarantees that the
read() function always gets the proper clocksource pointer handed
in.
Since there is now no use for the tkr.read pointer, this patch
also removes it, and to address stopping the fast timekeeper
during suspend/resume, it introduces a dummy clocksource to use
rather then just a dummy read function.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: stable <stable@vger.kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This fixes debugger syscall restart interactions. A debugger that
modifies the tracee's program counter is expected to set the orig_d0
pseudo register to -1, to disable a possible syscall restart.
This removes the last user of the ptrace_signal_deliver hook in the ptrace
signal handling, so remove that as well.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Pull timer fixes from Thomas Gleixner:
"Three fixlets for timers:
- Two hot-fixes for the alarmtimer based posix timers, which prevent
a nasty DOS by self rescheduling timers. The proper cleanup of that
mess is queued for 4.13
- Make a function static"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Make tick_broadcast_setup_oneshot() static
alarmtimer: Rate limit periodic intervals
alarmtimer: Prevent overflow of relative timers
Pull scheduler fixes from Thomas Gleixner:
"Two small fixes for the schedulre core:
- Use the proper switch_mm() variant in idle_task_exit() because that
code is not called with interrupts disabled.
- Fix a confusing typo in a printk"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
sched/fair: Fix typo in printk message
Pull irq fix from Thomas Gleixner:
"Add a missing resource release to an error path"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Release resources in __setup_irq() error path
Thomas Gleixner wrote:
> The CRIU support added a 'feature' which allows a user space task to send
> arbitrary (kernel) signals to itself. The changelog says:
>
> The kernel prevents sending of siginfo with positive si_code, because
> these codes are reserved for kernel. I think we can allow a task to
> send such a siginfo to itself. This operation should not be dangerous.
>
> Quite contrary to that claim, it turns out that it is outright dangerous
> for signals with info->si_code == SI_TIMER. The following code sequence in
> a user space task allows to crash the kernel:
>
> id = timer_create(CLOCK_XXX, ..... signo = SIGX);
> timer_set(id, ....);
> info->si_signo = SIGX;
> info->si_code = SI_TIMER:
> info->_sifields._timer._tid = id;
> info->_sifields._timer._sys_private = 2;
> rt_[tg]sigqueueinfo(..., SIGX, info);
> sigemptyset(&sigset);
> sigaddset(&sigset, SIGX);
> rt_sigtimedwait(sigset, info);
>
> For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this
> results in a kernel crash because sigwait() dequeues the signal and the
> dequeue code observes:
>
> info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0
>
> which triggers the following callchain:
>
> do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer()
>
> arm_timer() executes a list_add() on the timer, which is already armed via
> the timer_set() syscall. That's a double list add which corrupts the posix
> cpu timer list. As a consequence the kernel crashes on the next operation
> touching the posix cpu timer list.
>
> Posix clocks which are internally implemented based on hrtimers are not
> affected by this because hrtimer_start() can handle already armed timers
> nicely, but it's a reliable way to trigger the WARN_ON() in
> hrtimer_forward(), which complains about calling that function on an
> already armed timer.
This problem has existed since the posix timer code was merged into
2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to
inject not just a signal (which linux has supported since 1.0) but the
full siginfo of a signal.
The core problem is that the code will reschedule in response to
signals getting dequeued not just for signals the timers sent but
for other signals that happen to a si_code of SI_TIMER.
Avoid this confusion by testing to see if the queued signal was
preallocated as all timer signals are preallocated, and so far
only the timer code preallocates signals.
Move the check for if a timer needs to be rescheduled up into
collect_signal where the preallocation check must be performed,
and pass the result back to dequeue_signal where the code reschedules
timers. This makes it clear why the code cares about preallocated
timers.
Cc: stable@vger.kernel.org
Reported-by: Thomas Gleixner <tglx@linutronix.de>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reference: 66dd34ad31 ("signal: allow to send any siginfo to itself")
Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO")
Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When the auditd connection is reset, either intentionally or due to
a failure, any records that were in the main backlog queue would not
be sent in a multicast broadcast. This patch fixes this problem by
not flushing the main backlog queue on a connection reset, the main
kauditd_thread() will take care of that normally.
Resolves: https://github.com/linux-audit/audit-kernel/issues/41
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state. However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up. In fact,
quite often they should just be discarded.
Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.
For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.
In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume. In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.
In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled. However, to preserve the existing
behavior with respect to suspend-to-RAM, this only is done in
the suspend-to-idle case and only if an SCI has occurred while
suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The debug controller grabs cgroup_mutex from interface file show
functions which can deadlock and triggers lockdep warnings. Fix it by
using cgroup_kn_lock_live()/cgroup_kn_unlock() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Factor out cgroup_masks_read_one() out of cgroup_masks_read() for
simplicity.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Make debug an implicit controller on cgroup2 which is enabled by
"cgroup_debug" boot param.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Besides supporting cgroup v2 and thread mode, the following changes
are also made:
1) current_* cgroup files now resides only at the root as we don't
need duplicated files of the same function all over the cgroup
hierarchy.
2) The cgroup_css_links_read() function is modified to report
the number of tasks that are skipped because of overflow.
3) The number of extra unaccounted references are displayed.
4) The current_css_set_read() function now prints out the addresses of
the css'es associated with the current css_set.
5) A new cgroup_subsys_states file is added to display the css objects
associated with a cgroup.
6) A new cgroup_masks file is added to display the various controller
bit masks in the cgroup.
tj: Dropped thread mode related information for now so that debug
controller changes aren't blocked on the thread mode.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The Kconfig prompt and description of the debug cgroup controller
more accurate by saying that it is for debug purpose only and its
interfaces are unstable.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The debug cgroup currently resides within cgroup-v1.c and is enabled
only for v1 cgroup. To enable the debug cgroup also for v2, it makes
sense to put the code into its own file as it will no longer be v1
specific. There is no change to the debug cgroup specific code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The reference count in the css_set data structure was used as a
proxy of the number of tasks attached to that css_set. However, that
count is actually not an accurate measure especially with thread mode
support. So a new variable nr_tasks is added to the css_set to keep
track of the actual task count. This new variable is protected by
the css_set_lock. Functions that require the actual task count are
updated to use the new variable.
tj: s/task_count/nr_tasks/ for consistency with cgroup_root->nr_cgrps.
Refreshed on top of cgroup/for-v4.13 which dropped on
css_set_populated() -> nr_tasks conversion.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
__u8 h = __sk_buff->hash, or
__u16 p = __sk_buff->protocol
__u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.
This patch solves the issue by:
. Introduce a new parameter ctx_field_size to carry the
field size of narrower load from prog type
specific *__is_valid_access validator back to verifier.
. The non-zero ctx_field_size for a memory access indicates
(1). underlying prog type specific convert_ctx_accesses
supporting non-whole-field access
(2). the current insn is a narrower or whole field access.
. In verifier, for such loads where load memory size is
less than ctx_field_size, verifier transforms it
to a full field load followed by proper masking.
. Currently, __sk_buff and bpf_perf_event_data->sample_period
are supporting narrowing loads.
. Narrower stores are still not allowed as typical ctx stores
are just normal stores.
Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No nanosleep implementation modifies the rqtp argument. Mark is const.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
No point in converting the expiry time back and forth.
No point either to update the value in the caller supplied variable. mark
the rqtp argument const.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Move them to the native implementations and get rid of the set_fs() hackery.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-13-viro@ZenIV.linux.org.uk
get rid of set_fs(), sanitize compat copyin/copyout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-12-viro@ZenIV.linux.org.uk
... and get rid of set_fs() in there
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-11-viro@ZenIV.linux.org.uk
... and get rid of set_fs() in there
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-10-viro@ZenIV.linux.org.uk
Get rid of set_fs() mess and sanitize compat_{get,put}_timex(),
while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-9-viro@ZenIV.linux.org.uk
Turn restart_block.nanosleep.{rmtp,compat_rmtp} into a tagged union (kind =
1 -> native, kind = 2 -> compat, kind = 0 -> nothing) and make the places
doing actual copyout handle compat as well as native (that will become a
helper in the next commit). Result: compat wrappers, messing with
reassignments, etc. are gone.
[ tglx: Folded in a variant of Peter Zijlstras enum patch ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-6-viro@ZenIV.linux.org.uk
... instead of doing that in every ->nsleep() instance
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-5-viro@ZenIV.linux.org.uk
The hrtimer nanosleep() implementation can be simplified by moving the copy
out of the remaining time to do_nanosleep() which is shared between the
real nanosleep function and the restart function.
The pointer to the timespec64 which is updated is already stored in the
restart block at the call site, so the seperate handling of nanosleep and
restart function can be avoided.
[ tglx: Added changelog ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-4-viro@ZenIV.linux.org.uk
Store the pointer to the timespec which gets updated with the remaining
time in the restart block and remove the function argument.
[ tglx: Added changelog ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-3-viro@ZenIV.linux.org.uk
The alarmtimer nanosleep() implementation can be simplified by moving the
copy out of the remaining time to alarmtimer_do_nsleep() which is shared
between the real nanosleep function and the restart function.
The pointer to the timespec64 which is updated has to be stored in the
restart block anyway. Instead of storing it only in the restart case, store
it before calling alarmtimer_do_nsleep() and copy the remaining time in the
signal exit path.
[ tglx: Added changelog ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-2-viro@ZenIV.linux.org.uk
The posix-cpu-timer nanosleep() implementation can be simplified by moving
the copy out of the remaining time to do_cpu_nanosleep() which is shared
between the real nanosleep function and the restart function.
The pointer to the timespec64 which is updated has to be stored in the
restart block anyway. Instead of storing it only in the restart case, store
it before calling do_cpu_nanosleep() and copy the remaining time in the
signal exit path.
[ tglx: Added changelog ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-1-viro@ZenIV.linux.org.uk
The enum_map file is used to display a list of symbol
to name conversions. As its now used to resolve sizeof
lets update the name and description.
Link: http://lkml.kernel.org/r/20170531215653.3240-13-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The enum_replace stanza works as is for sizeof()
calls as well as enums. Rename it as well.
Link: http://lkml.kernel.org/r/20170531215653.3240-9-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rename the core trace enum routines to use eval, to
reflect their use by more than just enum to value mapping.
Link: http://lkml.kernel.org/r/20170531215653.3240-8-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rename the init and trace_enum_jmp_to_tail() routines
to reflect their use by more than enumerated types.
Link: http://lkml.kernel.org/r/20170531215653.3240-7-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a lock protecting the trace_enum_map, rename
it to reflect the use by more than enums.
Link: http://lkml.kernel.org/r/20170531215653.3240-6-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The enum map entries can be exported to userspace
via a sys enum_map file. Rename those functions
and structures to reflect the fact that we are using
them for more than enums.
Link: http://lkml.kernel.org/r/20170531215653.3240-5-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Each module has a list of enum's its contributing to the
enum map, rename that entry to reflect its use by more than
enums.
Link: http://lkml.kernel.org/r/20170531215653.3240-4-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Each enum is loaded into the trace_enum_map, as we
are now using this for more than enums rename it.
Link: http://lkml.kernel.org/r/20170531215653.3240-3-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The kernel and its modules have sections containing the enum
string to value conversions. Rename this section because we
intend to store more than enums in it.
Link: http://lkml.kernel.org/r/20170531215653.3240-2-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Originally reported by Adam and Dusty, it appears we have a small
race window in kauditd_thread(), as documented in the Fedora BZ:
* https://bugzilla.redhat.com/show_bug.cgi?id=1459326#c35
"This issue is partly due to the read-copy nature of RCU, and
partly due to how we sync the auditd_connection state across
kauditd_thread and the audit control channel. The kauditd_thread
thread is always running so it can service the record queues and
emit the multicast messages, if it happens to be just past the
"main_queue" label, but before the "if (sk == NULL || ...)"
if-statement which calls auditd_reset() when the new auditd
connection is registered it could end up resetting the auditd
connection, regardless of if it is valid or not. This is a rather
small window and the variable nature of multi-core scheduling
explains why this is proving rather difficult to reproduce."
The fix is to have functions only call auditd_reset() when they
believe that the kernel/auditd connection is still valid, e.g.
non-NULL, and to have these callers pass their local copy of the
auditd_connection pointer to auditd_reset() where it can be compared
with the current connection state before resetting. If the caller
has a stale state tracking pointer then the reset is ignored.
We also make a small change to kauditd_thread() so that if the
kernel/auditd connection is dead we skip the retry queue and send the
records straight to the hold queue. This is necessary as we used to
rely on auditd_reset() to occasionally purge the retry queue but we
are going to be calling the reset function much less now and we want
to make sure the retry queue doesn't grow unbounded.
Reported-by: Adam Williamson <awilliam@redhat.com>
Reported-by: Dusty Mabe <dustymabe@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When compiling with -Wsuggest-attribute=format, gcc complains that some
functions in kernel/printk/printk_safe.c transmit their argument to
printf-like functions without having a printf attribute. Silence these
warnings by adding relevant __printf attributes.
Link: http://lkml.kernel.org/r/20170524054950.6722-1-nicolas.iooss_linux@m4x.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The sanity check ensuring that the tick expiry cache (ts->next_tick)
is actually in sync with the hardware clock (dev->next_event) makes the
wrong assumption that the clock can't be programmed later than the
hrtimer deadline.
In fact the clock hardware can be programmed later on some conditions
such as:
* The hrtimer deadline is already in the past.
* The hrtimer deadline is earlier than the minimum delay supported
by the hardware.
Such conditions can be met when we program the tick, for example if the
last jiffies update hasn't been seen by the current CPU yet, we may
program the hrtimer to a deadline that is earlier than ktime_get()
because last_jiffies_update is our timestamp base to compute the next
tick.
As a result, we can randomly observe such warning:
WARNING: CPU: 5 PID: 0 at kernel/time/tick-sched.c:794 tick_nohz_stop_sched_tick kernel/time/tick-sched.c:791 [inline]
Call Trace:
tick_nohz_irq_exit
tick_irq_exit
irq_exit
exiting_irq
smp_call_function_interrupt
smp_call_function_single_interrupt
call_function_single_interrupt
Therefore, let's rather make sure that the tick expiry cache is sync'ed
with the tick hrtimer deadline, against which it is not supposed to
drift away. The clock hardware instead has its own will and can't be
used as a reliable comparison point.
Reported-and-tested-by: Sasha Levin <alexander.levin@verizon.com>
Reported-and-tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: James Hartsock <hartsjc@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Wright <tim@binbash.co.uk>
Link: http://lkml.kernel.org/r/1497326654-14122-1-git-send-email-fweisbec@gmail.com
[ Minor readability edit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
"The largest feature of this series is shrinking and simplification,
with the following diffstat summary:
79 files changed, 1496 insertions(+), 4211 deletions(-)
In other words, this series represents a net reduction of more than 2700
lines of code."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case __irq_set_trigger() fails the resources requested via
irq_request_resources() are not released.
Add the missing release call into the error handling path.
Fixes: c1bacbae81 ("genirq: Provide irq_request/release_resources chip callbacks")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/655538f5-cb20-a892-ff15-fbd2dd1fa4ec@gmail.com
Fixed checkpatch.pl warnings of "function definition argument FOO
should also have an identifier name"
Signed-off-by: Derek Robson <robsonde@gmail.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The recent rework of the posix timer internals broke the magic posix
mechanism, which requires that relative timers are not affected by
modifications of the underlying clock. That means relative CLOCK_REALTIME
timers cannot use CLOCK_REALTIME, because that can be set and adjusted. The
underlying hrtimer switches the clock for these timers to CLOCK_MONOTONIC.
That still works, but reading the remaining time of such a timer has been
broken in the rework. The old code used the hrtimer internals directly and
avoided the posix clock callbacks. Now common_timer_get() uses the
underlying kclock->timer_get() callback, which is still CLOCK_REALTIME
based. So the remaining time of such a timer is calculated against the
wrong time base.
Handle it by switching the k_itimer->kclock pointer according to the
resulting hrtimer mode. k_itimer->it_clock still contains CLOCK_REALTIME
because the timer might be set with ABSTIME later and then it needs to
switch back to the realtime posix clock implementation.
Fixes: eae1c4ae27 ("posix-timers: Make use of cancel/arm callbacks")
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Link: http://lkml.kernel.org/r/20170609201156.GB21491@outlook.office365.com
The recent posix timer rework moved the clearing of the itimerspec to the
real syscall implementation, but forgot that the kclock->timer_get() is
used by timer_settime() as well. That results in an uninitialized variable
and bogus values returned to user space.
Add the missing memset to timer_settime().
Fixes: eabdec0438 ("posix-timers: Zero settings value in common code")
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Link: http://lkml.kernel.org/r/20170609201156.GB21491@outlook.office365.com
clang -Wunused-function found one remaining function that was
apparently meant to be removed in a recent code cleanup:
kernel/cpu.c:565:20: warning: unused function 'check_for_tasks' [-Wunused-function]
Sebastian explained: The function became unused unintentionally, but there
is already a failure check, when a task cannot be removed from the outgoing
cpu in the scheduler code, so bringing it back is not really giving any
extra value.
Fixes: 530e9b76ae ("cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: http://lkml.kernel.org/r/20170608085544.2257132-1-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The refactoring of the posix-timer core to allow better code sharing
introduced inverted logic vs. SIGEV_NONE timers in common_timer_get().
That causes hrtimer_forward() to be called on active timers, which
rightfully triggers the warning hrtimer_forward().
Make sig_none what it says: signal mode == SIGEV_NONE.
Fixes: 91d57bae08 ("posix-timers: Make use of forward/remaining callbacks")
Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170609104457.GA39907@inn.lkp.intel.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Revert commit 39b64aa1c0 (cpufreq: schedutil: Reduce frequencies
slower) that introduced unintentional changes in behavior leading
to adverse effects on some systems.
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
idle_task_exit() can be called with IRQs on x86 on and therefore
should use switch_mm(), not switch_mm_irqs_off().
This doesn't seem to cause any problems right now, but it will
confuse my upcoming TLB flush changes. Nonetheless, I think it
should be backported because it's trivial. There won't be any
meaningful performance impact because idle_task_exit() is only
used when offlining a CPU.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: f98db6013c ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'schedstats' kernel parameter should be set to enable/disable, so
correct the printk hint saying that it should be set to 'enable'
rather than 'enabled' to enable scheduler tracepoints.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1496995229-31245-1-git-send-email-marcin.nowakowski@imgtec.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Right now, we don't reset the id of spilled registers in case of
clear_all_pkt_pointers(). Given pkt_pointers are highly likely to
contain an id, do so by reusing __mark_reg_unknown_value().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever we set the register to the type CONST_IMM, we currently don't
reset the id to 0. id member is not used in CONST_IMM case, so don't
let it become stale, where pruning won't be able to match later on.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
spilled_regs[] state is only used for stack slots of type STACK_SPILL,
never for STACK_MISC. Right now, in states_equal(), even if we have
old and current stack state of type STACK_MISC, we compare spilled_regs[]
for that particular offset. Just skip these like we do everywhere else.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
perf_sample_data consumes 386 bytes on stack, reduce excessive stack
usage and move it to per cpu buffer. It's allowed due to preemption
being disabled for tracing, xdp and tc programs, thus at all times
only one program can run on a specific CPU and programs cannot run
from interrupt. We similarly also handle bpf_pt_regs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull CPU hotplug fix from Ingo Molnar:
"An error handling corner case fix"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Drop the device lock on error
Pull RCU fixes from Ingo Molnar:
"Fix an SRCU bug affecting KVM IRQ injection"
* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
srcu: Allow use of Classic SRCU from both process and interrupt context
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Pull perf fixes from Ingo Molnar:
"This is mostly tooling fixes, plus an instruction pointer filtering
fix.
It's more fixes than usual - Arnaldo got back from a longer vacation
and there was a backlog"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf symbols: Kill dso__build_id_is_kmod()
perf symbols: Keep DSO->symtab_type after decompress
perf tests: Decompress kernel module before objdump
perf tools: Consolidate error path in __open_dso()
perf tools: Decompress kernel module when reading DSO data
perf annotate: Use dso__decompress_kmodule_path()
perf tools: Introduce dso__decompress_kmodule_{fd,path}
perf tools: Fix a memory leak in __open_dso()
perf annotate: Fix symbolic link of build-id cache
perf/core: Drop kernel samples even though :u is specified
perf script python: Remove dups in documentation examples
perf script python: Updated trace_unhandled() signature
perf script python: Fix wrong code snippets in documentation
perf script: Fix documentation errors
perf script: Fix outdated comment for perf-trace-python
perf probe: Fix examples section of documentation
perf report: Ensure the perf DSO mapping matches what libdw sees
perf report: Include partial stacks unwound with libdw
perf annotate: Add missing powerpc triplet
perf test: Disable breakpoint signal tests for powerpc
...
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add CONFIG_CGROUP_BPF as a default configuration in android base config
since it is used to replace XT_QTAGUID in future.
Reviewed-at: https://android-review.googlesource.com/#/c/400374/
Signed-off-by: Chenbo Feng <fengc@google.com>
[AmitP: cherry-picked this change from Android common kernel]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds CONFIG_MODULES, CONFIG_MODULE_UNLOAD, and CONFIG_MODVERSIONS
which are required by the O release.
Reviewed-at: https://android-review.googlesource.com/#/c/364554/
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[AmitP: cherry-picked this change from Android common kernel]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC options, which are a
requirement for the O release.
Reviewed-at: https://android-review.googlesource.com/#/c/364553/
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[AmitP: cherry-picked this change from Android common kernel]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable CPU domain PAN to ensure that normal kernel accesses are
unable to access userspace addresses.
Reviewed-at: https://android-review.googlesource.com/#/c/334035/
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
[AmitP: cherry-picked this change from Android common kernel, updated
the commit message and re-placed the CONFIG_STRICT_KERNEL_RWX
config in sorted order]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn off the two kernel configs to disable related system ABI.
Reviewed-at: https://android-review.googlesource.com/#/c/264976/
Signed-off-by: Max Shi <meixuanshi@google.com>
[AmitP: cherry-picked this change from Android common kernel]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable PAN emulation using TTBR0_EL1 switching.
Reviewed-at: https://android-review.googlesource.com/#/c/325997/
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
[AmitP: cherry-picked this change from Android common kernel
and updated the commit message]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If compiler has stack protector support, set
CONFIG_CC_STACKPROTECTOR_STRONG.
Reviewed-at: https://android-review.googlesource.com/#/c/238388/
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
[AmitP: cherry-picked this change from Android common kernel]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull RCU fix from Paul E. McKenney:
" This series enables srcu_read_lock() and srcu_read_unlock() to be used from
interrupt handlers, which fixes a bug in KVM's use of SRCU in delivery
of interrupts to guest OSes. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tiny RCU's job is to be tiny, so this commit removes its RCU CPU
stall warning code. After this, there is no longer any need for
rcu_sched_ctrlblk and rcu_bh_ctrlblk to be in tiny_plugin.h, so this
commit also moves them to tiny.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's debugging Kconfig options are in the unintuitive location
lib/Kconfig.debug, and there are enough of them that it would be good for
them to be more centralized. This commit therefore extracts RCU's Kconfig
options from init/Kconfig into a new kernel/rcu/Kconfig.debug file.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's Kconfig options are scattered, and there are enough of them
that it would be good for them to be more centralized. This commit
therefore extracts RCU's Kconfig options from init/Kconfig into a new
kernel/rcu/Kconfig file.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and
CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and
are redundant with the rcu_nocbs= boot parameter. This commit therefore
removes these three Kconfig options and adjusts the rcutorture scripts
to use the boot parameter instead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's debugfs tracing used to be the only reasonable low-level debug
information available, but ftrace and event tracing has since surpassed
the RCU debugfs level of usefulness. This commit therefore removes
RCU's debugfs tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU was only ever intended to be a fallback in case of issues
with Tree/Tiny SRCU, and the latter two are doing quite well in testing.
This commit therefore removes Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The function srcutorture_get_gp_data() duplicated the check for
sp->batch_check0.head instead of also checking sp->batch_check1.head.
The only effect of this typo would be for rcutorture statistics to
understate the fraction of time that an SRCU grace period was in flight,
and only for Classic SRCU. This commit fixes this typo.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The PROVE_RCU_REPEATEDLY Kconfig option was initially added due to
the volume of messages from PROVE_RCU: Doing just one per boot would
have required excessive numbers of boots to locate them all. However,
PROVE_RCU messages are now relatively rare, so there is no longer any
reason to need more than one such message per boot. This commit therefore
removes the PROVE_RCU_REPEATEDLY Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Because raw_spin_lock_irqsave() and raw_spin_unlock_irqrestore()
both do typecheck() on their flags argument, there is no point in
duplicating this check in raw_spin_lock_irqsave_rcu_node() and
raw_spin_unlock_irqrestore_rcu_node(). This commit therefore saves
a few lines by removing this duplicated check.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013
by commit 0edd1b1784 ("nohz_full: Add full-system-idle state machine"),
but has not been used. This commit therefore removes it.
If it turns out to be needed later, this commit can always be reverted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can
also be done with the rcutree.kthread_prio kernel boot parameter.
This commit therefore removes this Kconfig option.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
The RCU_TORTURE_TEST_SLOW_PREINIT, RCU_TORTURE_TEST_SLOW_PREINIT_DELAY,
RCU_TORTURE_TEST_SLOW_PREINIT_DELAY, RCU_TORTURE_TEST_SLOW_INIT,
RCU_TORTURE_TEST_SLOW_INIT_DELAY, RCU_TORTURE_TEST_SLOW_CLEANUP,
and RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY Kconfig options are only
useful for torture testing, and there are the rcutree.gp_cleanup_delay,
rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot parameters
that rcutorture can use instead. The effect of these parameters is to
artificially slow down grace period initialization and cleanup in order
to make some types of race conditions happen more often.
This commit therefore simplifies Tree RCU a bit by removing the Kconfig
options and adding the corresponding kernel parameters to rcutorture's
.boot files instead. However, this commit also leaves out the kernel
parameters for TREE02, TREE04, and TREE07 in order to have about the
same number of tests slowed as not slowed. TREE01, TREE03, TREE05,
and TREE06 are slowed, and the rest are not slowed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit uses TREE RCU's rnp->lock wrappers to replace a few explicit
memory barriers. This change also has the advantage of making SRCU's
memory-ordering properties be implemented in roughly the same way as they
are in Tree RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves the now-generic rnp->lock wrapper macros from
kernel/rcu/tree.h to kernel/rcu/rcu.h, thus allowing SRCU to use them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Use of smp_mb__after_unlock_lock() would allow SRCU to omit a full
memory barrier during callback execution, so this commit converts
raw_spin_lock_rcu_node() from inline functions to type-generic macros
to allow them to handle locks in srcu_node structures as well as
rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit a5dd63efda ("lockdep: Use "WARNING" tag on lockdep splats")
substituted pr_warn() for printk() in places called out by Dmitry Vyukov.
However, this resulted in an ugly mix of pr_warn() and printk(). This
commit therefore changes printk() to pr_warn() or pr_cont(), depending
on the absence or presence of KERN_CONT. This is done in all functions
that had printk() changed to pr_warn() by the aforementioned commit.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_segcblist structure provides quite a bit of functionality, and
Tiny SRCU needs almost none of it. So this commit replaces Tiny SRCU's
uses of rcu_segcblist with a simple singly linked list with tail pointer.
This change significantly reduces Tiny SRCU's memory footprint, more
than making up for the growth caused by the creation of rcu_segcblist.c
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The call_srcu() docbook entry is currently in include/linux/srcu.h,
which causes needless processing for each include point. This commit
therefore moves this entry to kernel/rcu/srcutree.c, which the compiler
reads only once. In addition, the srcu_batches_completed() function is
used only within RCU and its torture-test suites. This commit therefore
also moves this function's declaration from include/linux/srcutiny.h,
include/linux/srcutree.h, and include/linux/srcuclassic.h to
kernel/rcu/rcu.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a given CPU never happens to ever start an SRCU grace period, the
grace-period sequence counter might wrap. If this CPU were to decide to
finally start a grace period, the state of its sdp->srcu_gp_seq_needed
might make it appear that it has already requested this grace period,
which would prevent starting the grace period. If no other CPU ever started
a grace period again, this would look like a grace-period hang. Even
if some other CPU took pity and started the needed grace period, the
leaf rcu_node structure's ->srcu_data_have_cbs field won't have record
of the fact that this CPU has a callback pending, which would look like
a very localized grace-period hang.
This might seem very unlikely, but SRCU grace periods can take less than
a microsecond on small systems, which means that overflow can happen
in much less than an hour on a 32-bit embedded system. And embedded
systems are especially likely to have long-term idle CPUs. Therefore,
it makes sense to prevent this scenario from happening.
This commit therefore scans each srcu_data structure occasionally,
with frequency controlled by the srcutree.counter_wrap_check kernel
boot parameter. This parameter can be set to something like 255
in order to exercise the counter-wrap-prevention code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_request_urgent_qs_task() function is used only within RCU,
so there is no point in exporting it to the rest of the kernel from
nclude/linux/rcutiny.h and include/linux/rcutree.h. This commit therefore
moves this function to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The various functions similar to rcu_batches_started(), the
function show_rcu_gp_kthreads(), the various functions similar to
rcu_force_quiescent_state(), and the variables rcutorture_testseq and
rcutorture_vernum are used only within RCU. There is therefore no point
in exporting them to the kernel at large from include/linux/rcutiny.h
and include/linux/rcutree.h. This commit therefore moves all of these
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_ftrace_dump() function is used only internally to RCU. This
commit therefore moves its declaration from include/linux/rcupdate.h
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_is_nocb_cpu() function is used only internally to RCU. This
commit therefore moves its declaration from include/linux/rcupdate.h
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "__call_rcu(): Leaked duplicate callback" error message from
__call_rcu() has proven to be unhelpful. This commit therefore changes
it to "__call_rcu(): Double-freed CB" and adds the value of the pointer
passed in. The value of the pointer improves debuggability by allowing
correlation with tracing output, for example, the rcu:rcu_callback trace
event.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU_SCHEDULER_INACTIVE, RCU_SCHEDULER_INIT, and RCU_SCHEDULER_RUNNING
definitions are used only within RCU, so this commit moves them from
include/linux/rcupdate.h to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The __rcu_is_watching() function is currently not used, aside from
to implement the rcu_is_watching() function. This commit therefore
eliminates __rcu_is_watching(), which has the beneficial side-effect
of shrinking include/linux/rcupdate.h a bit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The include/linux/rcupdate.h file contains a number of definitions that
are used only to communicate between rcutorture, rcuperf, and the RCU code
itself. There is no point in having these definitions exposed globally
throughout the kernel, so this commit moves them to kernel/rcu/rcu.h.
This change has the added benefit of shrinking rcupdate.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_gp_is_normal(), rcu_gp_is_expedited(), rcu_expedite_gp(), and
rcu_unexpedite_gp() functions are intended only for use within the
RCU implementation itself -- the sysfs access is what should be used
outside of RCU. This commit therefore moves the declarations for
these functions to kernel/rcu/rcu.h, and also includes this file into
kernel/rcu/rcutorture.c and kernel/rcu/rcuperf.c. This also has the
beneficial effect of shrinking rcupdate.c a bit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_expedited and rcu_normal variables are used only by sysctl
and kernel/rcu/update.c, so it does not make sense to their extern
declarations in rcupdate.h. This commit therefore moves these
extern declarations to update.c.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The include/linux/rcupdate.h file is included by more than 200
files, so shrinking it should provide some build-time benefits.
This commit therefore moves several docbook comments from rcupdate.h to
kernel/rcu/update.c, kernel/rcu/tree.c, and kernel/rcu/tree_plugin.h, thus
reducing the number of times that the compiler has to scan these comments.
This likely provides only a small benefit, but every little bit helps.
This commit also fixes a malformed bulleted list noted by the 0day
Test Robot.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Wait/wakeup operations do not guarantee ordering on their own. Instead,
either locking or memory barriers are required. This commit therefore
adds memory barriers to wake_nocb_leader() and nocb_leader_wait().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: <stable@vger.kernel.org> # 4.6.x
Daniel Borkmann
Lawrence Brakmo
Linus Torvalds
Kees Cook
David S. Miller
Josh Poimboeuf
Deepa Dinamani
Gustavo A. R. Silva
Arvind Yadav
Daniel Bristot de Oliveira
Al Viro
Sabrina Dubroca
Martin KaFai Lau
Steven Rostedt (VMware)
Luis R. Rodriguez
Thomas Gleixner
Sebastian Andrzej Siewior
Tejun Heo
Joel Fernandes
BaoJun Luo
Balbir Singh
Corentin Labbe
Jeffy Chen
Daniel Lezcano
Rik van Riel
Ingo Molnar
Yonghong Song
Nicolas Pitre
Marc Zyngier
Christoph Hellwig
Rafael J. Wysocki
Frederic Weisbecker
Bartosz Golaszewski
Hendrik Brueckner
John Stultz
Peter Meerwald-Stadler
Davidlohr Bueso
Daniel Axtens
Levin, Alexander (Sasha Levin)
Petr Mladek
Andreas Schwab
Eric W. Biederman
Paul Moore
Waiman Long
Jeremy Linton
Nicolas Iooss
Heiner Kallweit
Derek Robson
Arnd Bergmann
Stephen Boyd
Jens Axboe
Greg Kroah-Hartman
Andy Lutomirski
Marcin Nowakowski
Roberto Pereira
Chenbo Feng
Greg Kroah-Hartman
Sami Tolvanen
Max Shi
Jeff Vander Stoep
Paul E. McKenney