Граф коммитов

836 Коммитов

Автор SHA1 Сообщение Дата
wengang wang 28d57d4377 ocfs2: add IO error check in ocfs2_get_sector()
Check for IO error in ocfs2_get_sector().

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:12 -08:00
Tiger Yang 4442f51826 ocfs2: set gap to seperate entry and value when xattr in bucket
This patch set a gap (4 bytes) between xattr entry and
name/value when xattr in bucket. This gap use to seperate
entry and name/value when a bucket is full. It had already
been set when xattr in inode/block.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:11 -08:00
Tao Ma c8b9cf9a7c ocfs2: lock the metaecc process for xattr bucket
For other metadata in ocfs2, metaecc is checked in ocfs2_read_blocks
with io_mutex held. While for xattr bucket, it is calculated by
the whole buckets. So we have to add a spin_lock to prevent multiple
processes calculating metaecc.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:11 -08:00
Tao Ma 89a907afe0 ocfs2: Use the right access_* method in ctime update of xattr.
In ctime updating of xattr, it use the wrong type of access for
inode, so use ocfs2_journal_access_di instead.

Reported-and-Tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:11 -08:00
Sunil Mushran 53ecd25e14 ocfs2/dlm: Make dlm_assert_master_handler() kill itself instead of the asserter
In dlm_assert_master_handler(), if we get an incorrect assert master from a node
that, we reply with EINVAL asking the asserter to die. The problem is that an
assert is sent after so many hoops, it is invariably the node that thinks the
asserter is wrong, is actually wrong. So instead of killing the asserter, this
patch kills the assertee.

This patch papers over a race that is still being addressed.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:11 -08:00
Sunil Mushran dabc47de7a ocfs2/dlm: Use ast_lock to protect ast_list
The code was using dlm->spinlock instead of dlm->ast_lock to protect the
ast_list. This patch fixes the issue.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:09 -08:00
Sunil Mushran c74ff8bb22 ocfs2: Cleanup the lockname print in dlmglue.c
The dentry lock has a different format than other locks. This patch fixes
ocfs2_log_dlm_error() macro to make it print the dentry lock correctly.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:09 -08:00
Sunil Mushran 7dc102b737 ocfs2/dlm: Retract fix for race between purge and migrate
Mainline commit d4f7e650e5 attempts to delay
the dlm_thread from sending the drop ref message if the lockres is being
migrated. The problem is that we make the dlm_thread wait for the migration
to complete. This causes a deadlock as dlm_thread also participates in the
lockres migration process.

A better fix for the original oss bugzilla#1012 is in testing.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:09 -08:00
Tao Ma 47be12e4ee ocfs2: Access and dirty the buffer_head in mark_written.
In __ocfs2_mark_extent_written, when we meet with the situation
of c_split_covers_rec, the old solution just replace the extent
record and forget to access and dirty the buffer_head. This will
cause a problem when the unwritten extent is in an extent block.
So access and dirty it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-26 11:51:09 -08:00
Jan Kara 7f5aa21508 jbd2: Avoid possible NULL dereference in jbd2_journal_begin_ordered_truncate()
If we race with commit code setting i_transaction to NULL, we could
possibly dereference it.  Proper locking requires the journal pointer
(to access journal->j_list_lock), which we don't have.  So we have to
change the prototype of the function so that filesystem passes us the
journal pointer.  Also add a more detailed comment about why the
function jbd2_journal_begin_ordered_truncate() does what it does and
how it should be used.

Thanks to Dan Carpenter <error27@gmail.com> for pointing to the
suspitious code.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Joel Becker <joel.becker@oracle.com>
CC: linux-ext4@vger.kernel.org
CC: ocfs2-devel@oss.oracle.com
CC: mfasheh@suse.de
CC: Dan Carpenter <error27@gmail.com>
2009-02-10 11:15:34 -05:00
Mark Fasheh fd4ef23196 ocfs2: add quota call to ocfs2_remove_btree_range()
We weren't reclaiming the clusters which get free'd from this function,
so any user punching holes in a file would still have those bytes accounted
against him/her. Add the call to vfs_dq_free_space_nodirty() to fix this.
Interestingly enough, the journal credits calculation already took this into
account.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
2009-02-02 14:20:20 -08:00
Sunil Mushran a4b91965d3 ocfs2: Wakeup the downconvert thread after a successful cancel convert
When two nodes holding PR locks on a resource concurrently attempt to
upconvert the locks to EX, the master sends a BAST to one of the nodes. This
message tells that node to first cancel convert the upconvert request,
followed by downconvert to a NL. Only when this lock is downconverted to NL,
can the master upconvert the first node's lock to EX.

While the fs was doing the cancel convert, it was forgetting to wake up the
dc thread after a successful cancel, leading to a deadlock.

Reported-and-Tested-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02 14:20:19 -08:00
Tao Ma 554e7f9e04 ocfs2: Access the xattr bucket only before modifying it.
In ocfs2_xattr_value_truncate, we may call b-tree codes which will
extend the journal transaction. It has a potential problem that it
may let the already-accessed-but-not-dirtied buffers gone. So we'd
better access the bucket after we call ocfs2_xattr_value_truncate.
And as for the root buffer for the xattr value, b-tree code will
acess and dirty it, so we don't need to worry about it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02 14:20:18 -08:00
Jan Kara f8afead716 ocfs2: Fix possible deadlock in ocfs2_write_dquot()
It could happen that some limit has been set via quotactl() and in parallel
->mark_dirty() is called from another thread doing e.g. dquot_alloc_space(). In
such case ocfs2_write_dquot() must not try to sync the dquot because that needs
global quota lock but that ranks above transaction start.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02 14:20:17 -08:00
Jan Kara ea455f8ab6 ocfs2: Push out dropping of dentry lock to ocfs2_wq
Dropping of last reference to dentry lock is a complicated operation involving
dropping of reference to inode. This can get complicated and quota code in
particular needs to obtain some quota locks which leads to potential deadlock.
Thus we defer dropping of inode reference to ocfs2_wq.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02 14:20:16 -08:00
Linus Torvalds cc597bc3d3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6:
  ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop()
  quota: Improve locking
2009-01-26 10:41:00 -08:00
Alexey Dobriyan 2fe4371dff fs/Kconfig: move ocfs2 out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:54 +03:00
Jan Kara c475146d8f ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop()
Since ->acquire_dquot and ->release_dquot callbacks aren't called under
dqptr_sem anymore, we don't have to start a transaction and obtain locks
so early. So we can just remove all this complicated stuff.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mark Fasheh <mfasheh@suse.de>
2009-01-21 15:25:57 +01:00
Coly Li 73ac36ea14 fix similar typos to successfull
When I review ocfs2 code, find there are 2 typos to "successfull".  After
doing grep "successfull " in kernel tree, 22 typos found totally -- great
minds always think alike :)

This patch fixes all the similar typos. Thanks for Randy's ack and comments.

Signed-off-by: Coly Li <coyli@suse.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Vlad Yasevich <vladislav.yasevich@hp.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:15 -08:00
Fernando Carrijo c19a28e119 remove lots of double-semicolons
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:14 -08:00
Frederik Schwarzer 025dfdafe7 trivial: fix then -> than typos in comments and documentation
- (better, more, bigger ...) then -> (...) than

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:06 +01:00
Linus Torvalds 10cc04f5a0 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (138 commits)
  ocfs2: Access the right buffer_head in ocfs2_merge_rec_left.
  ocfs2: use min_t in ocfs2_quota_read()
  ocfs2: remove unneeded lvb casts
  ocfs2: Add xattr support checking in init_security
  ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle
  ocfs2: calculate and reserve credits for xattr value in mknod
  ocfs2/xattr: fix credits calculation during index create
  ocfs2/xattr: Always updating ctime during xattr set.
  ocfs2/xattr: Remove extend_trans call and add its credits from the beginning
  ocfs2/dlm: Fix race during lockres mastery
  ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list
  ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating
  ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler()
  ocfs2/dlm: Fix a race between migrate request and exit domain
  ocfs2: One more hamming code optimization.
  ocfs2: Another hamming code optimization.
  ocfs2: Don't hand-code xor in ocfs2_hamming_encode().
  ocfs2: Enable metadata checksums.
  ocfs2: Validate superblock with checksum and ecc.
  ocfs2: Checksum and ECC for directory blocks.
  ...
2009-01-05 18:32:43 -08:00
Al Viro 56ff5efad9 zero i_uid/i_gid on inode allocation
... and don't bother in callers.  Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.

i_mode is not worth the effort; it has no common default value.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05 11:54:28 -05:00
Tao Ma 9047beabb8 ocfs2: Access the right buffer_head in ocfs2_merge_rec_left.
In commit "ocfs2: Use metadata-specific ocfs2_journal_access_*()
functions", the wrong buffer_head is accessed. So change it
to the right buffer_head.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:37 -08:00
Mark Fasheh dad7d975e4 ocfs2: use min_t in ocfs2_quota_read()
This is preferred to min().

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:37 -08:00
Mark Fasheh a641dc2a5a ocfs2: remove unneeded lvb casts
dlmglue.c has lots of code which casts the return value of ocfs2_dlm_lvb().
This is pointless however, as ocfs2_dlm_lvb() returns void *.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Tiger Yang 38d59ef61c ocfs2: Add xattr support checking in init_security
We must check whether ocfs2 volume support xattr in init_security,
if not support xattr and security is enable, would cause failure of mknod.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Tiger Yang 008aafaf0b ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle
In extreme situation, may need xattr bucket for setting
security entry and acl entries during mknod. This only
happens when block size is too small.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Tiger Yang 0e445b6fe9 ocfs2: calculate and reserve credits for xattr value in mknod
We extend the credits for xattr's large value in set_value_outside
before, this can give rise to a credits issue when we set one security
entry and two acl entries duing mknod. As we remove extend_trans form
set_value_outside, we must calculate and reserve the credits for
xattr's large value in mknod.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Tao Ma 90cb546cad ocfs2/xattr: fix credits calculation during index create
When creating a xattr index block, the old calculation forget
to add credits for the meta change of the alloc file. So add
more credits and more comments to explain it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Tao Ma 4b3f6209bf ocfs2/xattr: Always updating ctime during xattr set.
In xattr set, we should always update ctime if the operation goes
sucessfully. The old one mistakenly put it in ocfs2_xattr_set_entry
which is only called when we set xattr in inode or xattr block. The
side benefit is that it resolve the bug 1052 since in that scenario,
ocfs2_calc_xattr_set_need only calc out the xattr set credits while
ocfs2_xattr_set_entry update the inode also which isn't concerned with
the process of xattr set.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Tao Ma 71d548a6af ocfs2/xattr: Remove extend_trans call and add its credits from the beginning
Actually, when setting a new xattr value, we know it from the very
beginning, and it isn't like the extension of bucket in which case
we can't figure it out. So remove ocfs2_extend_trans in that function
and calculate it before the transaction. It also relieve acl operation
from the worry about the side effect of ocfs2_extend_trans.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:36 -08:00
Sunil Mushran 7b791d6856 ocfs2/dlm: Fix race during lockres mastery
dlm_get_lock_resource() is supposed to return a lock resource with a proper
master. If multiple concurrent threads attempt to lookup the lockres for the
same lockid while the lock mastery in underway, one or more threads are likely
to return a lockres without a proper master.

This patch makes the threads wait in dlm_get_lock_resource() while the mastery
is underway, ensuring all threads return the lockres with a proper master.

This issue is known to be limited to users using the flock() syscall. For all
other fs operations, the ocfs2 dlmglue layer serializes the dlm op for each
lockid.

Users encountering this bug will see flock() return EINVAL and dmesg have the
following error:
ERROR: Dlm error "DLM_BADARGS" while calling dlmlock on resource <LOCKID>: bad api args

Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Sunil Mushran b0d4f817ba ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list
This patch adds a new lock, dlm->tracking_lock, to protect adding/removing
lockres' to/from the dlm->tracking_list. We were previously using dlm->spinlock
for the same, but that proved inadequate as we could be freeing a lockres from
a context that did not hold that lock. As the new lock only protects this list,
we can explicitly take it when removing the lockres from the tracking list.

This bug was exposed when testing multiple processes concurrently flock() the
same file.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Sunil Mushran d4f7e650e5 ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating
During lockres purge, o2dlm sends a drop reference message to the lockres
master. This patch delays the message if the lockres is being migrated.

Fixes oss bugzilla#1012
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1012

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Sunil Mushran 57dff2676e ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler()
Patch cleans printed errors in dlm_proxy_ast_handler(). The errors now includes
the node number that sent the (b)ast. Also it reduces the number of endian swaps
of the cookie.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Sunil Mushran 2b83256407 ocfs2/dlm: Fix a race between migrate request and exit domain
Patch address a racing migrate request message and an exit domain message.
Instead of blocking exit domains for the duration of the migrate, we ignore
failure to deliver that message. This is because an exiting domain should
not have any active locks and thus has no role to play in the migration.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Joel Becker 58896c4d0e ocfs2: One more hamming code optimization.
The previous optimization used a fast find-highest-bit-set operation to
give us a good starting point in calc_code_bit().  This version lets the
caller cache the previous code buffer bit offset.  Thus, the next call
always starts where the last one left off.

This reduces the calculation another 39%, for a total 80% reduction from
the original, naive implementation.  At least, on my machine.  This also
brings the parity calculation to within an order of magnitude of the
crc32 calculation.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Joel Becker 7bb458a585 ocfs2: Another hamming code optimization.
In the calc_code_bit() function, we must find all powers of two beneath
the code bit number, *after* it's shifted by those powers of two.  This
requires a loop to see where it ends up.

We can optimize it by starting at its most significant bit.  This shaves
32% off the time, for a total of 67.6% shaved off of the original, naive
implementation.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:35 -08:00
Joel Becker e798b3f8a9 ocfs2: Don't hand-code xor in ocfs2_hamming_encode().
When I wrote ocfs2_hamming_encode(), I was following documentation of
the algorithm and didn't have quite the (possibly still imperfect) grasp
of it I do now.  As part of this, I literally hand-coded xor.  I would
test a bit, and then add that bit via xor to the parity word.

I can, of course, just do a single xor of the parity word and the source
word (the code buffer bit offset).  This cuts CPU usage by 53% on a
mostly populated buffer (an inode containing utmp.h inline).

Joel

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Joel Becker 9d28cfb73f ocfs2: Enable metadata checksums.
Add OCFS2_FEATURE_INCOMPAT_META_ECC to the list of supported features.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Joel Becker d030cc978e ocfs2: Validate superblock with checksum and ecc.
The superblock is read via a raw call.  Validate it after we find it
from its signature.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Joel Becker c175a518b4 ocfs2: Checksum and ECC for directory blocks.
Use the db_check field of ocfs2_dir_block_trailer to crc/ecc the
dirblocks.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Mark Fasheh 87d35a74b1 ocfs2: Add directory block trailers.
Future ocfs2 features metaecc and indexed directories need to store a
little bit of data in each dirblock.  For compatibility, we place this
in a trailer at the end of the dirblock.  The trailer plays itself as an
empty dirent, so that if the features are turned off, it can be reused
without requiring a tunefs scan.

This code adds the trailer and validates it when the block is read in.

[ Mark is the original author, but I reinserted this code before his
  dir index work.  -- Joel ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Joel Becker 8400897249 ocfs2: Use proper journal_access function in xattr.c
Change the rest of the naked ocfs2_journal_access() calls in
fs/ocfs2/xattr.c to use the appropriate ocfs2_journal_access_*() call
for their metadata type.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Joel Becker 4311901daa ocfs2: Pass value buf to ocfs2_remove_value_outside().
ocfs2_remove_value_outside() needs to know the type of buffer it is
looking at.  Pass in an ocfs2_xattr_value_buf.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:33 -08:00
Joel Becker 512620f44d ocfs2: Use ocfs2_xattr_value_buf in ocfs2_xattr_set_entry().
ocfs2_xattr_set_entry is the function that knows what type of block it
is setting into.  This is what we wanted from ocfs2_xattr_value_buf.
Plus, moving the value buf up into ocfs2_xattr_set_entry() allows us to
pass it into ocfs2_xattr_set_value_outside() and ocfs2_xattr_cleanup().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:33 -08:00
Joel Becker 0c748e9532 ocfs2: Pass value buf to ocfs2_xattr_update_entry().
ocfs2_xattr_update_entry() updates the entry portion of an xattr buffer.
This can be part of multiple metadata block types, so pass the buffer in
via an ocfs2_xattr_value_buf.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:33 -08:00
Joel Becker b3e5d37905 ocfs2: Pass ocfs2_xattr_value_buf into ocfs2_xattr_value_truncate().
The callers of ocfs2_xattr_value_truncate() now pass in
ocfs2_xattr_value_bufs.  These callers are the ones that calculated the
xv location, so they are the right starting point.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:32 -08:00
Joel Becker 19b801f45f ocfs2: Pull ocfs2_xattr_value_buf up into ocfs2_xattr_value_truncate().
Place an ocfs2_xattr_value_buf in ocfs2_xattr_value_truncate() and pass
it down to ocfs2_xattr_shrink_size().  We can also pass it into
ocfs2_xattr_extend_allocation(), replacing its ocfs2_xattr_value_buf.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:32 -08:00