- Show the tgid mappings for user space trace tools to use
- Fix and optimize the comm and tgid cache recording
- Sanitize derived kprobe names
- Ftrace selftest updates
- trace file header fix
- Update of Documentation/trace/ftrace.txt
- Compiler warning fixes
- Fix possible uninitialized variable
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZZ2rbFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
V3MIAI3NZ3dr0dKJ7DMF1jsQc24YF/bMG2noWm2b9+H/sO+gbnJKsizqzrB2Cm8S
lFCYGSydLKGGZgKob3wkAX15iO2fxcUvJOKzkKxmyDbwAteABRf9LSr/llthRIsT
8kSPI5bgJ5dah+lvhl9+1ekarsIZGr41svY97Knj9A2K18kQplnSNqgatkIuV2Kn
hIoiPI0tG2y27In2JJoaTedAHj4NIwmI3nhTt6nks0GN7ICx3bMcvdE9l+zB+OLJ
akAehsTk3kcNb66ttoj6ZTzGZ7kaes96Cl6/uamVpXzh3SXla36ux1r9Kp8bgONE
EgrJwbRwU8BMDaattutDxT7/XmU=
=TPGB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"A few more minor updates:
- Show the tgid mappings for user space trace tools to use
- Fix and optimize the comm and tgid cache recording
- Sanitize derived kprobe names
- Ftrace selftest updates
- trace file header fix
- Update of Documentation/trace/ftrace.txt
- Compiler warning fixes
- Fix possible uninitialized variable"
* tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix uninitialized variable in match_records()
ftrace: Remove an unneeded NULL check
ftrace: Hide cached module code for !CONFIG_MODULES
tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE
tracing: Update Documentation/trace/ftrace.txt
tracing: Fixup trace file header alignment
selftests/ftrace: Add a testcase for kprobe event naming
selftests/ftrace: Add a test to probe module functions
selftests/ftrace: Update multiple kprobes test for powerpc
trace/kprobes: Sanitize derived event names
tracing: Attempt to record other information even if some fail
tracing: Treat recording tgid for idle task as a success
tracing: Treat recording comm for idle task as a success
tracing: Add saved_tgids file to show cached pid to tgid mappings
The documentation of ftrace.txt has become rather outdated. Bring it closer
to reality of todays kernel.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The loadavg naming code still assumes that nohz == idle whereas its code
is actually handling well both nohz idle and nohz full.
So lets fix the naming according to what the code actually does, to
unconfuse the reader.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497838322-10913-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
o STM can hook into the function tracer
o Function filtering now supports more advance glob matching
o Ftrace selftests updates and added tests
o Softirq tag in traces now show only softirqs
o ARM nop added to non traced locations at compile time
o New trace_marker_raw file that allows for binary input
o Optimizations to the ring buffer
o Removal of kmap in trace_marker
o Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
o Other various fixes and clean ups
Note, there are two patches marked for stable. These were discovered
near the end of the 4.9 rc release cycle. By the time I had them tested
it was just a matter of days before 4.9 would be released, and I
figured I would just submit them in the merge window. They are old
bugs and not critical. Nothing non-root could abuse.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYUrFHFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
2+AIAIr20kSQV/nA5htGAeCTobVk3WUxY6bvjd9mIJDKPP19akNLyREW0G3KnfCr
yhx4aFRZG98fRu/6F8qieRosyN36lADDVYHelMFHMpcTOpE2aZGjaaOuNGxOEA9v
FmMPTX+K3+dzKyFP4l68R3+5JuQ1/AqLTioTWeLW8IDQ2OOVsjD8+0BuXrNKMJDY
o6U4Hk5U/vn+zHc6BmgBzloAXemBd7iJ1t5V3FRRGvm8yv3HU85Twc5ofGeYTWvB
J8PboEywRlIzxg0Kd8mxnMI5PgaKZSEc2ub8E7cY/CZ5PYpDE2xDA2hJmJgfYp00
1VW+DHRpRZfElsCcya6S6P4bs5Y=
=MGZ/
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This release has a few updates:
- STM can hook into the function tracer
- Function filtering now supports more advance glob matching
- Ftrace selftests updates and added tests
- Softirq tag in traces now show only softirqs
- ARM nop added to non traced locations at compile time
- New trace_marker_raw file that allows for binary input
- Optimizations to the ring buffer
- Removal of kmap in trace_marker
- Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
- Other various fixes and clean ups"
* tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits)
selftests: ftrace: Shift down default message verbosity
kprobes/trace: Fix kprobe selftest for newer gcc
tracing/kprobes: Add a helper method to return number of probe hits
tracing/rb: Init the CPU mask on allocation
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too
fgraph: Handle a case where a tracer ignores set_graph_notrace
tracing: Replace kmap with copy_from_user() in trace_marker writing
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
tracing: Allow benchmark to be enabled at early_initcall()
tracing: Have system enable return error if one of the events fail
tracing: Do not start benchmark on boot up
tracing: Have the reg function allow to fail
ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline
ring-buffer: Froce rb_update_write_stamp() to be inlined
ring-buffer: Force inline of hotpath helper functions
tracing: Make __buffer_unlock_commit() always_inline
tracing: Make tracepoint_printk a static_key
ring-buffer: Always inline rb_event_data()
ring-buffer: Make rb_reserve_next_event() always inlined
...
Documentation was missing for mono and mono_raw, add them and also for
the boot clock introduced in this series.
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Link: http://lkml.kernel.org/r/1480372524-15181-8-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A new file is created:
/sys/kernel/debug/tracing/trace_marker_raw
This allows for appications to create data structures and write the binary
data directly into it, and then read the trace data out from trace_pipe_raw
into the same type of data structure. This saves on converting numbers into
ASCII that would be required by trace_marker.
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use glob_match() to support flexible glob wildcards (*,?)
and character classes ([) for ftrace.
Since the full glob matching is slower than the current
partial matching routines(*pat, pat*, *pat*), this leaves
those routines and just add MATCH_GLOB for complex glob
expression.
e.g.
----
[root@localhost tracing]# echo 'sched*group' > set_ftrace_filter
[root@localhost tracing]# cat set_ftrace_filter
sched_free_group
sched_change_group
sched_create_group
sched_online_group
sched_destroy_group
sched_offline_group
[root@localhost tracing]# echo '[Ss]y[Ss]_*' > set_ftrace_filter
[root@localhost tracing]# head set_ftrace_filter
sys_arch_prctl
sys_rt_sigreturn
sys_ioperm
SyS_iopl
sys_modify_ldt
SyS_mmap
SyS_set_thread_area
SyS_get_thread_area
SyS_set_tid_address
sys_fork
----
Link: http://lkml.kernel.org/r/147566869501.29136.6462645009894738056.stgit@devbox
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The subtime is used only for function profiler with function graph
tracer enabled. Move the definition of subtime under
CONFIG_FUNCTION_PROFILER to reduce the memory usage. Also move the
initialization of subtime into the graph entry callback.
Link: http://lkml.kernel.org/r/20160831025529.24018-1-namhyung@kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
1) With the changing of the code for filtering events by pid, from
a list of pids to a bitmask, we can now easily implement following
forks. With a new tracing option "event-fork" which, when set, will
have tasks with pids in set_event_pid, when they fork, to have their
child pids added to set_event_pid and the child will be traced as well.
Note, if "event-fork" is set and a task with its pid in set_event_pid
exits, its pid will be removed from set_event_pid
2) The addition of Tom Zanussi's hist triggers. This includes a very
thorough documentatino on how to use the hist triggers with events.
This introduces a quick and easy way to get histogram data from
events and their fields.
Some other cleanups and updates were added as well. Like Masami Hiramatsu
added test cases for the event trigger and hist triggers. Also I added
a speed up of filtering by using a temp buffer when filters are set.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXPIv1AAoJEKKk/i67LK/8WZcIAIaaHJMctDCfXPg8OoT1LLI/
yUxgWvQRM7iwGV8YjuaXlyxTDJU0XVoNpPF5ZGiePlRDSCUboNvgcNVHRusJJKqM
oV1BTsq2x5eY12agA8kSOHcqGP7saqa2H+RJ4+3jNB/DTtOwJ8RzodlqWQ7PZbRG
0IDvD7buh9NeDS2am835RB+Xhy/jNBrkoJjpvMNaG5nZypsMq8D524RzyBm6RYjp
p+KLo3/yDc0+khv1hIs1c/w+LXNs7XtpPjpAKBa8B4xOiXndh3IosjX3JnL+0f+6
EvXt6qRfBKCE5o2BM397qjE3V/L0/SfzTijuL1WMd88ZvPGqwcsslQekmxKAb1E=
=WBTB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This includes two new updates for the ftrace infrastructure.
- With the changing of the code for filtering events by pid, from a
list of pids to a bitmask, we can now easily implement following
forks. With a new tracing option "event-fork" which, when set,
will have tasks with pids in set_event_pid, when they fork, to have
their child pids added to set_event_pid and the child will be
traced as well.
Note, if "event-fork" is set and a task with its pid in
set_event_pid exits, its pid will be removed from set_event_pid
- The addition of Tom Zanussi's hist triggers. This includes a very
thorough documentatino on how to use the hist triggers with events.
This introduces a quick and easy way to get histogram data from
events and their fields.
Some other cleanups and updates were added as well. Like Masami
Hiramatsu added test cases for the event trigger and hist triggers.
Also I added a speed up of filtering by using a temp buffer when
filters are set"
* tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
tracing: Use temp buffer when filtering events
tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic
tracing: Remove unused function trace_current_buffer_lock_reserve()
tracing: Remove one use of trace_current_buffer_lock_reserve()
tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL
tracing: Remove unused function trace_current_buffer_discard_commit()
tracing: Move trace_buffer_unlock_commit{_regs}() to local header
tracing: Fold filter_check_discard() into its only user
tracing: Make filter_check_discard() local
tracing: Move event_trigger_unlock_commit{_regs}() to local header
tracing: Don't use the address of the buffer array name in copy_from_user
tracing: Handle tracing_map_alloc_elts() error path correctly
tracing: Add check for NULL event field when creating hist field
tracing: checking for NULL instead of IS_ERR()
tracing: Do not inherit event-fork option for instances
tracing: Fix unsigned comparison to zero in hist trigger code
kselftests/ftrace: Add a test for log2 modifier of hist trigger
tracing: Add hist trigger 'log2' modifier
kselftests/ftrace: Add hist trigger testcases
kselftests/ftrace : Add event trigger testcases
...
The CPU load update related functions have a weak naming convention
currently, starting with update_cpu_load_*() which isn't ideal as
"update" is a very generic concept.
Since two of these functions are public already (and a third is to come)
that's enough to introduce a more conventional naming scheme. So let's
do the following rename instead:
update_cpu_load_*() -> cpu_load_update_*()
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1460555812-25375-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add documentation to the ftrace.txt file in Documentation to describe the
event-fork option. Also add the missing "display-graph" option now that it
shows up in the trace_options file (from a previous commit).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The changes with more meat are:
o Allowing the trace event filters to filter on CPU number and process ids
o Two new markers for trace output latency were added
(10 and 100 msec latencies)
o Have tracing_thresh filter function profiling time
I also worked on modifying the ring buffer code for some future
work, and moved the adding of the timestamp around. One of my changes
caused a regression, and since other changes were built on top of it
and already tested, I had to operate a revert of that change. Instead
of rebasing, this change set has the code that caused a regression
as well as the code to revert that change without touching the other
changes that were made on top of it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV6aZEAAoJEEjnJuOKh9ldrR4H/A1RcQf1prLLoUibPP4w3lat
dmQcdpS1NY+cqyiKuKPAOkFDGQL7qWzRqZ8whcPSJIsHq57ufqNSLf+0bbQYPzg9
g3CgGL7OApmGi5ulj0sNxhadvc9TFm/SAN0nVJlNuUWdm8e1UWHLsrJZaMfopu2r
RDEtkOhg619mhDL4rktNdS6rk0B92Fhu2o2PwLZPVlUl1NNEt4WJU+ejitXUVO1A
Nb70/rTGGJKtyHbW+74on4LnEN5Uu0Viu6rMwGfYyIgRmC2otdBDvE4xfKMiTUKr
SzBjzrhIoMIRn4Vl0vElfulkpYaw7pcC2BdpZ4d9VpIOiLSlZs0x/TgCtpFEv5M=
=baZ3
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing update from Steven Rostedt:
"Mostly this is just clean ups and micro optimizations.
The changes with more meat are:
- Allowing the trace event filters to filter on CPU number and
process ids
- Two new markers for trace output latency were added (10 and 100
msec latencies)
- Have tracing_thresh filter function profiling time
I also worked on modifying the ring buffer code for some future work,
and moved the adding of the timestamp around. One of my changes
caused a regression, and since other changes were built on top of it
and already tested, I had to operate a revert of that change. Instead
of rebasing, this change set has the code that caused a regression as
well as the code to revert that change without touching the other
changes that were made on top of it"
* tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated"
tracing: Don't make assumptions about length of string on task rename
tracing: Allow triggers to filter for CPU ids and process names
ftrace: Format MCOUNT_ADDR address as type unsigned long
tracing: Introduce two additional marks for delay
ftrace: Fix function_graph duration spacing with 7-digits
ftrace: add tracing_thresh to function profile
tracing: Clean up stack tracing and fix fentry updates
ring-buffer: Reorganize function locations
ring-buffer: Make sure event has enough room for extend and padding
ring-buffer: Get timestamp after event is allocated
ring-buffer: Move the adding of the extended timestamp out of line
ring-buffer: Add event descriptor to simplify passing data
ftrace: correct the counter increment for trace_buffer data
tracing: Fix for non-continuous cpu ids
tracing: Prefer kcalloc over kzalloc with multiply
Add a new powerpc-specific trace clock using the timebase register,
similar to x86-tsc. This gives us
- a fast, monotonic, hardware clock source for trace entries, and
- a clock that can be used to correlate events across cpus as well as across
hypervisor and guests.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A fine granulity support for delay would be very useful when profiling
VM logics, such as page allocation including page reclaim and memory
compaction with function graph.
Thus, this patch adds two additional marks with two changes.
- An equal sign in mark selection function is removed to align code
behavior with comments and documentation.
- The function graph example related to delay in ftrace.txt is updated
to cover all supported marks.
Link: http://lkml.kernel.org/r/1436626300-1679-3-git-send-email-jungseoklee85@gmail.com
Cc: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
4a88d44ab1 ("tracing: Remove mentioning of legacy latency_trace file
from documentation") changed a sentence to refer to only one file
instead of two, but the sentence still uses "they". Fix it.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The command `echo > set_ftrace_pid` should be used to clean the filter quietly.
because the command `echo -1 > set_ftrace_pid` will output the following:
"bash: echo: write error: Invalid argument".
so update the file Documentation/trace/ftrace.txt.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Currently, function graph tracer prints "!" or "+" just before
function execution time to signal a function overhead, depending
on the time. And some tracers tracing latency also print "!" or
"+" just after time to signal overhead, depending on the interval
between events. Even it is usually enough to do that, we sometimes
need to signal for bigger execution time than 100 micro seconds.
For example, I used function graph tracer to detect if there is
any case that exit_mm() takes too much time. I did following steps
in /sys/kernel/debug/tracing. It was easier to detect very large
excution time with patched kernel than with original kernel.
$ echo exit_mm > set_graph_function
$ echo function_graph > current_tracer
$ echo > trace
$ cat trace_pipe > $LOGFILE
... (do something and terminate logging)
$ grep "\\$" $LOGFILE
3) $ 22082032 us | } /* kernel_map_pages */
3) $ 22082040 us | } /* free_pages_prepare */
3) $ 22082113 us | } /* free_hot_cold_page */
3) $ 22083455 us | } /* free_hot_cold_page_list */
3) $ 22083895 us | } /* release_pages */
3) $ 22177873 us | } /* free_pages_and_swap_cache */
3) $ 22178929 us | } /* unmap_single_vma */
3) $ 22198885 us | } /* unmap_vmas */
3) $ 22206949 us | } /* exit_mmap */
3) $ 22207659 us | } /* mmput */
3) $ 22207793 us | } /* exit_mm */
And then, it was easy to find out that a schedule-out occured by
sub_preempt_count() within kernel_map_pages().
To detect very large function exection time caused by either problematic
function implementation or scheduling issues, this patch can be useful.
Link: http://lkml.kernel.org/r/1416789259-24038-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce FTRACE_OPS_FL_IPMODIFY to avoid conflict among
ftrace users who may modify regs->ip to change the execution
path. If two or more users modify the regs->ip on the same
function entry, one of them will be broken. So they must add
IPMODIFY flag and make sure that ftrace_set_filter_ip() succeeds.
Note that ftrace doesn't allow ftrace_ops which has IPMODIFY
flag to have notrace hash, and the ftrace_ops must have a
filter hash (so that the ftrace_ops can hook only specific
entries), because it strongly depends on the address and
must be allowed for only few selected functions.
Link: http://lkml.kernel.org/r/20141121102516.11844.27829.stgit@localhost.localdomain
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ fixed up some of the comments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We always use resched_task() with rq->curr argument.
It's not possible to reschedule any task but rq's current.
The patch introduces resched_curr(struct rq *) to
replace all of the repeating patterns. The main aim
is cleanup, but there is a little size profit too:
(before)
$ size kernel/sched/built-in.o
text data bss dec hex filename
155274 16445 7042 178761 2ba49 kernel/sched/built-in.o
$ size vmlinux
text data bss dec hex filename
7411490 1178376 991232 9581098 92322a vmlinux
(after)
$ size kernel/sched/built-in.o
text data bss dec hex filename
155130 16445 7042 178617 2b9b9 kernel/sched/built-in.o
$ size vmlinux
text data bss dec hex filename
7411362 1178376 991232 9580970 9231aa vmlinux
I was choosing between resched_curr() and resched_rq(),
and the first name looks better for me.
A little lie in Documentation/trace/ftrace.txt. I have not
actually collected the tracing again. With a hope the patch
won't make execution times much worse :)
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140628200219.1778.18735.stgit@localhost
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the function-graph tracer, add a funcgraph_tail option
to print the function name on all } lines, not just
functions whose first line is no longer in the trace
buffer.
If a function calls other traced functions, its total
time appears on its } line. This change allows grep
to be used to determine the function for which the
line corresponds.
Update Documentation/trace/ftrace.txt to describe
this new option.
Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the introduction of PREEMPT_NEED_RESCHED in:
f27dde8dee ("sched: Add NEED_RESCHED to the preempt_count")
we need to be able to look at both TIF_NEED_RESCHED and
PREEMPT_NEED_RESCHED to understand the full preemption behaviour.
Add it to the trace output.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.
This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.
Format is:
<function>:cpudump
echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.
Format is:
<function>:dump
echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter
Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace.txt document has been suffering from some serious bit rot.
Updated the current content to how things are as of v3.10.
Remove things that no longer exist.
Add documentation about new features:
per_cpu
stats
instances
stack trace
etc.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now, "snapshot" file returns success on a reset of snapshot buffer
even if the buffer wasn't allocated, instead of returning EINVAL.
This patch updates snapshot desctiption according to the change.
Link: http://lkml.kernel.org/r/51399409.4090207@hitachi.com
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds snapshot description in ftrace documentation.
This description includes what the snapshot is and how to use it.
Link: http://lkml.kernel.org/r/20121226025309.3252.150.stgit@liselsia
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_enabled should not be used, it is heavy weight and does not
do much in helping lower the overhead.
tracing_on should be used instead. Warn users to use tracing_on
when tracing_enabled is used as it will soon be removed from the
tracing directory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events sched_switch and sched_wakeup do the same thing
as the stand alone sched_switch tracer does. It is no longer needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The mod command went in as commit
64e7c44061
The traceon/traceoff commands went in as commit
23b4ff3aa4
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1272045759-32018-1-git-send-email-chase.douglas@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one
dump every cpu buffers when an oops or panic happens.
It's nice when you have few cpus but it may take ages if have many,
plus you miss the real origin of the problem in all the cpu traces.
Sometimes, all you need is to dump the cpu buffer that triggered the
opps, most of the time it is our main interest.
This patch modifies ftrace_dump_on_oops to handle this choice.
The ftrace_dump_on_oops kernel parameter, when it comes alone, has
the same behaviour than before. But ftrace_dump_on_oops=orig_cpu
will only dump the buffer of the cpu that oops'ed.
Similarly, sysctl kernel.ftrace_dump_on_oops=1 and
echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous
behaviour. But setting 2 jumps into cpu origin dump mode.
v2: Fix double setup
v3: Fix spelling issues reported by Randy Dunlap
v4: Also update __ftrace_dump in the selftests
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
'ftrace' is no longer the name of the function tracer, to activate
the function trace 'echo function > current_tracer' is to be used instead
of 'echo ftrace > current_tracer'. Update the documentation to reflect
the current implementation.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
LKML-Reference: <4B5D0BA8.20106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trivial patch to fix a documentation example and to fix a
comment.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091023233646.871719877@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While implementing function tracer and function tracer graph support,
I found the exact arch implementation details to be a bit lacking
(and my x86 foo ain't great). So after pounding out support for
the Blackfin arch, start documenting the requirements/details.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <1252973415-21264-1-git-send-email-vapier@gentoo.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency_trace file got removed a while back by commit
886b5b73d7 and has been replaced
by the latency-format option.
This patch fixes the documentation by reflecting this change.
Changes since v1:
- mention that the trace format is configurable through the
latency-format option
- Fix a couple mistakes related to the timestamps
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090831204007.GE4237@pc-ras4041.res.insa>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.
And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.
debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/
Fix inconsistency of directory name to mount debugfs filesystem.
* From Steven Rostedt
- find_debugfs() and tracing_files() in this patch.
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
The function graph tracer is called just "function_graph" (no trailing
"_tracer" needed).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <1244623722-6325-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix typo about chart to map the kernel priority to user land priorities.
* About sched_setscheduler(2)
Processes scheduled under SCHED_FIFO or SCHED_RR
can have a (user-space) static priority in the range 1 to 99.
(reference: http://www.kernel.org/doc/man-pages/online/pages/
man2/sched_setscheduler.2.html)
* From: Steven Rostedt
0 to 98 - maps to RT tasks 99 to 1 (SCHED_RR or SCHED_FIFO)
99 - maps to internal kernel threads that want to be lower than RT tasks
but higher than SCHED_OTHER tasks. Although I'm not sure if any
kernel thread actually uses this. I'm not even sure how this can be
set, because the internal sched_setscheduler function does not allow
for it.
100 to 139 - maps nice levels -20 to 19. These are not set via
sched_setscheduler, but are set via the nice system call.
140 - reserved for idle tasks.
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to
the new trace/ directory.
I didnt find any references to those documents in both source
files and documents, so no extra work needs to be done.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds
Steven Rostedt (VMware)
Frederic Weisbecker
Liu, Changcheng
Joel Fernandes
Masami Hiramatsu
Namhyung Kim
Dmitry Safonov
Naveen N. Rao
Jungseok Lee
Rabin Vincent
Wang Long
Byungchul Park
Masami Hiramatsu
Kirill Tkhai
Robert Elliott
Peter Zijlstra
Jingoo Han
Hiraku Toyooka
Geunsik Lim
David Sharp
Steven Rostedt
Chase Douglas
Daniel Mack
Yang Hongyang
Jiri Olsa
Uwe Kleine-Koenig
Mike Frysinger
Albin Tonnerre
GeunSik Lim
Li Zefan