Граф коммитов

2467 Коммитов

Автор SHA1 Сообщение Дата
Alan Cox 7b4f6ecacb ahci: Add identifiers for ASM106x devices
They don't always appear as AHCI class devices but instead as IDE class.

Based on an initial patch by Hiroaki Nito

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13 00:24:29 -04:00
Alan Cox 17c60c6b76 ahci: Add alternate identifier for the 88SE9172
This can also appear as 0x9192. Reported in bugzilla and confirmed with the
board documentation for these boards.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42970
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: The Stables <stable@vger.kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13 00:23:57 -04:00
Ben Hutchings 1fefb8fdc6 ahci: Add JMicron 362 device IDs
The JMicron JMB362 controller supports AHCI only, but some revisions
use the IDE class code.  These need to be matched by device ID.

These additions have apparently been included by QNAP in their NAS
devices using these controllers.

References: http://bugs.debian.org/634180
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13 00:23:12 -04:00
Prarit Bhargava d17d794c63 libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
commit d70e551c8e, Add " 2GB ATA Flash
Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-25 10:16:45 -04:00
Jeff Garzik 04d0f1b849 [libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro
Michael Eitelwein writes:

I have an external SATA drive that was slowed down by bridge limits. I
found a solution in a thread on this list posted in 2008: It introduces
whitelist entries in libata-core.c for devices with well working bridges
(e.g. email on Fri, 31 Oct 2008 01:45:27 -0400).

I added my device to this whitelist in a custom built kernel and it
works fine for weeks now. How can I have this device added on the
whitelist within the official kernel? Is this whitelist mechanism still
supported or is there a smarter way to achieve whitelisting?

I added the following whitelist entry for my Buffalo DriveStation
Quattro "BUFFALO HD-QSU2/R5":

        /* Devices that do not need bridging limits applied */
        { "MTRON MSP-SATA*",            NULL,   ATA_HORKAGE_BRIDGE_OK, },
        { "BUFFALO HD-QSU2/R5",         NULL,   ATA_HORKAGE_BRIDGE_OK, },

Reported-by: Michael Eitelwein <michael@eitelwein.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:36:59 -04:00
Paul Menzel ebd6002815 [libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff
Building Linux for an ASUS Eee PC 701 4G with

        ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
        ata2.00: 7815024 sectors, multi 0: LBA
        ata2.00: configured for UDMA/66
        scsi 1:0:0:0: Direct-Access     ATA      SILICONMOTION SM n/a  PQ: 0 ANSI: 5
        sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB)
        sd 1:0:0:0: [sda] Write Protect is off
        sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
        sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
         sda: sda1
        sd 1:0:0:0: [sda] Attached SCSI disk
        sd 1:0:0:0: Attached scsi generic sg0 type 0

I followed the advice to not use the deprecated old PATA subsystem

        ATA/ATAPI/MFM/RLL support (DEPRECATED)  --->

and use the ATA subsystem instead.

        Serial ATA and Parallel ATA drivers  --->

Unfortunately I needed several tries to find out, that I needed the SFF
menu I had not selected before because I had never heard that term
before. I think it would have helped me, to have PATA or legacy IDE in
that item’s name.

Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:31:18 -04:00
Aaron Lu 8340091709 [libata] acpi: call ata_acpi_gtm during ata port init time
Commit 30dcf76acc mistakenly dropped
the code to get an initial gtm for the IDE channel. This caused the
following problem for Sergei:
http://marc.info/?l=linux-kernel&m=134484963618457&w=2

Fix this by adding the call back in ata_acpi_bind_host, and due to
this, the ata_ap_acpi_handle is modified accordingly.

Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:29:27 -04:00
James Ralston 389cd78496 ata_piix: Add Device IDs for Intel Lynx Point-LP PCH
This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:27:22 -04:00
James Ralston 77b12bc9cf ahci: Add Device IDs for Intel Lynx Point-LP PCH
This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:26:59 -04:00
Arnd Hannemann 1117c811a6 pata_atiixp: override cable detection on MSI E350DM-E33
The mainboard MSI E350DM-E33 is advertised with 6 SATA ports.
As it turns out, two of them seem to be driven by on-board
SATA<->PATA converters. If a disk drive is connected to one
of them kernel uses UDMA/33 mode due to cable detection:

[   34.550823] scsi4 : pata_atiixp
[   34.555517] scsi5 : pata_atiixp
[   34.555942] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[   34.555948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
...
[   35.040799] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
[   35.040806] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   35.040817] ata5.00: limited to UDMA/33 due to 40-wire cable
[   35.049166] ata5.00: configured for UDMA/33
[   35.049402] scsi 4:0:0:0: Direct-Access     ATA      WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5

This patch forces "short cable" mode on this board, as it seems clear that
the on-board SATA<->PATA "cable" is short.
With this patch the disk is configured for UDMA/100:

[    5.976756] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
[    5.996434] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    6.024787] ata5.00: configured for UDMA/100

Testing revealed no transfer issues.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:26:51 -04:00
Rob Herring bbb4ab43f8 ahci: un-staticize ahci_dev_classify
Make ahci_dev_classify available to the ahci platform driver for custom
hard reset function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17 13:26:22 -04:00
Linus Torvalds 44d82e2963 ARM: arm-soc Marvell Orion device-tree updates
This branch contains a set of device-tree conversions for Marvell Orion
 platforms that were staged early but took a few tries to get the branch
 into a format where it was suitable for us to pick up.
 
 Given that most people working on these platforms are hobbyists with
 limited time, we were a bit more flexible with merging it even though
 it came in late.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQGrp8AAoJEIwa5zzehBx3Ou8P/3HA53sS2WotNsBjpGTPuJim
 TppOmfFU6e7TLaY2oOWjIb5tPxK96u4vvCnQFAv+9TF+ewW0yCQlkBIJga3uVE7+
 tlz5TbKBo+vQYrFgFCpEwwTHYuLgjpIK4wDs+09EkIM4cMqe6RnLK1KGo6vCAqO9
 CKE0rqEfUFjdUq2jed7HA39iwNqJrz8VGLviozvTjW2R42x9iGuy5m2DpThYrLzr
 7IYwKGMaJIatG1C/pai7KLEjdJgQl9PeDsgG0oyYY2HHeNy3o8m7tLOL3tnWXeyj
 XaniNs/YZBp4nADf2sCzXxEVjqRBPVyiw8qCHEOW5L1cfUTq//1QDI3I4kcQzffg
 VsfLPNvzFsPEMlLI1Xo5UX/8w3xQhBeoI8PtlX7coBMBLn5rJXGnjGpEnH+5SsSA
 8KXxm4hP2aOGF+injoEv5HCEiUngH4YPN4hgXwyYdJKcln2YHy8xoIVabsmx27+v
 bSfododiEvHsBNxfz0Nn5Vo5O3trubU3qe4FEBAhS3pU3GksBocokAqtxeR+BBbH
 RfBVJ09QEYx1N+c6bhGQXt7F+8sUYO0s9tA7BEkeJtiXp8OX6M8eE4mFoMpIJbsC
 SmyxsVEE9pna9x3TSy42jiGO3yxbuKEoAy2HfyU1R8yq84XBFXbkgwV02tQcgClz
 vH4VgGdQoGULqa83GImG
 =xb8w
 -----END PGP SIGNATURE-----

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
 "This contains a set of device-tree conversions for Marvell Orion
  platforms that were staged early but took a few tries to get the
  branch into a format where it was suitable for us to pick up.

  Given that most people working on these platforms are hobbyists with
  limited time, we were a bit more flexible with merging it even though
  it came in late."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

Conflicts:
	drivers/watchdog/orion_wdt.c
2012-08-02 11:50:24 -07:00
Viresh Kumar d14fb1e930 ata/pata_arasan: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:12 -07:00
Andrew Lunn 97b414e119 ATA: sata_mv: Add device tree support
Add support for instantiating this driver from device tree, and add
the necassary DT information to the kirkwood.dtsi file.

This is based on previous work by Michael Walle and Jason Cooper.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27 16:48:45 +02:00
Jeff Garzik 641589bff7 [libata] pata_cmd64x: whitespace cleanup
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 16:07:40 -04:00
Stephen Rothwell 354b2eac38 libata-acpi: fix up for acpi_pm_device_sleep_state API
After merging the libata tree, today's [2012-07-01] linux-next build (x86_64
allmodconfig) failed like this:

drivers/ata/libata-acpi.c: In function 'ata_acpi_set_state':
drivers/ata/libata-acpi.c:872:5: error: too few arguments to function 'acpi_pm_device_sleep_state'
include/acpi/acpi_bus.h:418:5: note: declared here

Caused by commit 3bd46600a7 ("libata-acpi: add ata port runtime D3Cold
support") from the libata tree interacting with commit ee85f54371
("ACPI/PM: specify lowest allowed state for device sleep state") from the
pci tree.

This patch adds ACPI_STATE_D3 as the new third parameter to
acpi_pm_device_sleep_state()

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 16:02:19 -04:00
Jeff Garzik 8407884dd9 Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstream
Two bits were appended to the end of the bitfield
list in struct scsi_device.  Resolve that conflict
by including both bits.

Conflicts:
	include/scsi/scsi_device.h
2012-07-25 15:58:48 -04:00
Thang Q. Nguyen dc7f71f486 sata_dwc_460ex: device tree may specify dma_channel
Only channel 0 is currently support and the driver code is fixed on
channel 0. This patch lets device node specifying dma-channel in case
it is not 0. If no dma-channel property is specified, channel 0 is
used as default.

Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:54:21 -04:00
Jeffrin Jose facb8fa6c7 ahci, trivial: fixed coding style issues related to braces
Fixed coding style issues related to braces found
by checkpatch.pl in drivers/ata/ahci.c

Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:50:20 -04:00
Shiraz Hashim 18c25ff457 ahci_platform: add hibernation callbacks
Use existing suspend, resume implementation for hibernation callbacks.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:31:08 -04:00
H Hartley Sweeten 604284071a libata-eh.c: local functions should not be exposed globally
The function ata_ering_clear_cb is only referenced in this file and
should be marked static to prevent it from being exposed globally.

This quiets the sparse warning:

warning: symbol 'ata_ering_clear_cb' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:17:32 -04:00
H Hartley Sweeten b0e73af78a libata-transport.c: local functions should not be exposed globally
Functions not referenced outside of a source file should be marked
static to prevent it from being exposed globally.

This quiets the sparse warnings:

warning: symbol 'ata_is_port' was not declared. Should it be static?
warning: symbol 'ata_is_link' was not declared. Should it be static?
warning: symbol 'ata_is_ata_dev' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:14:55 -04:00
Thang Q. Nguyen 3a8b788f61 sata_dwc_460ex: support hardreset
The hardreset operation is currently not supported. This causes
sometime the SATA driver does cause kernel crash because of
none-determined state.a This patch will fix the issue.

Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:13:53 -04:00
Axel Lin 2fc75da0c5 ata: use module_pci_driver
This patch converts the drivers in drivers/ata/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Cc: Mark Lord <kernel@teksavvy.com>
Cc: Jeremy Higdon <jeremy@sgi.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:12:11 -04:00
Julia Lawall b08f5bc404 drivers/ata/pata_pcmcia.c: adjust suspicious bit operation
IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false.  The
value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so
first pick those bits and then make the test using !=.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:06:20 -04:00
Fabio Estevam a18dada08e pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare
With the new i.mx clock framework, we need to use
clk_prepare_enable/clk_disable_unprepare.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 15:05:43 -04:00
Mark Nelson ff0173c1a3 ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2
Like e65cc194f7 (ahci: Enable SB600 64bit
DMA on MSI K9A2 Platinum) and 3c4aa91f21
(ahci: Enable SB600 64bit DMA on Asus M3A), this patch enables 64bit DMA
for the AHCI SATA controller of another board that has the SB600
southbridge.

In this case though we're enabling 64bit DMA for another MSI motherboard,
the K9AGM2 or MS-7327. It is new enough that all of the BIOS releases
since the initial release (1.0 from 2007-02-09) work correctly with 64bit
DMA enabled.

Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 14:39:35 -04:00
Daniel J Blueman c531077f40 [libata] Prevent interface errors with Seagate FreeAgent GoFlex
When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure,
interface errors are always seen until 1.5Gbps is negotiated [1]. This
occurs using any disk in the enclosure, and when the disk is connected
directly with a generic passive eSATAp cable, we see stable 3Gbps
operation as expected.

Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset
and renegotiation incurs.

Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 14:34:42 -04:00
Lin Ming e91df93ebd libata-acpi: add missing inlines in libata.h
Adds inline for ata_acpi_unregister/ata_acpi_bind/ata_acpi_unbind
in drivers/ata/libata.h for !CONFIG_ATA_ACPI to fix below warnings.

warning: 'ata_acpi_unregister' defined but not used [-Wunused-function]
warning: 'ata_acpi_bind' defined but not used [-Wunused-function]
warning: 'ata_acpi_unbind' defined but not used [-Wunused-function]

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25 14:15:03 -04:00
Dan Williams e4a9c3732c [SCSI] libata, libsas: introduce sched_eh and end_eh port ops
When managing shost->host_eh_scheduled libata assumes that there is a
1:1 shost-to-ata_port relationship.  libsas creates a 1:N relationship
so it needs to manage host_eh_scheduled cumulatively at the host level.
The sched_eh and end_eh port port ops allow libsas to track when domain
devices enter/leave the "eh-pending" state under ha->lock (previously
named ha->state_lock, but it is no longer just a lock for ha->state
changes).

Since host_eh_scheduled indicates eh without backing commands pinning
the device it can be deallocated at any time.  Move the taking of the
domain_device reference under the port_lock to guarantee that the
ata_port stays around for the duration of eh.

Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:45 +01:00
Aaron Lu 166a2967b4 libata: tell scsi layer device supports runtime power off
If ATA device supports "Device Attention", then tell scsi layer that
the device supports runtime power off.

Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:45 -04:00
Lin Ming b1354cbb5b libata: detect Device Attention support
Add a new flag ATA_DFLAG_DA to indicate that device supports "Device
Attention".

Acked-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:17 -04:00
Lin Ming a606dac368 libata-acpi: register/unregister device to/from power resource
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:15 -04:00
Lin Ming 3bd46600a7 libata-acpi: add ata port runtime D3Cold support
ATA port may support runtime D3Cold state, for example, Zero-power ODD case.
This patch adds wakeup notifier and enable/disable run_wake during
supend/resume.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:13 -04:00
Lin Ming febe53ba6b libata-acpi: set acpi state for SATA port
Currently, ata_acpi_set_state() only sets acpi sate for IDE port.
Remove this limitation.

Acked-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:12 -04:00
Matthew Garrett 30dcf76acc libata: migrate ACPI code over to new bindings
Now that we have the ability to directly glue the ACPI namespace to the
driver model in libata, we don't need the custom code to handle the same
thing. Remove it and migrate the functions over to the new code.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Holger Macht <holger@homac.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:11 -04:00
Matthew Garrett 6b66d95895 libata: bind the Linux device tree to the ACPI device tree
Associate the ACPI device tree and libata devices.
This patch uses the generic ACPI glue framework to do so.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Holger Macht <holger@homac.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29 11:38:10 -04:00
Viresh Kumar 10d8935f46 Viresh has moved
viresh.kumar@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with viresh.linux@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'

Signed-off-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:36 -07:00
Linus Torvalds 2795343705 arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this
 now moves the first three platforms over to it: imx, mxs and spear.
 
 The series also contains the changes for the clock subsystem itself,
 since Mike preferred to have it together with the platforms that require
 these changes, in order to avoid interdependencies and conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB
 j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9
 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW
 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R
 kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL
 kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx
 Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM
 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn
 tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY
 azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW
 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq
 7ZVLCqZD0cB9DhmMDkWP
 =rwFF
 -----END PGP SIGNATURE-----

Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...
2012-05-26 12:42:29 -07:00
Rafal Prylowski 2fff275126 PATA host controller driver for ep93xx
Add PATA host controller driver for ep93xx.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-22 16:02:34 -04:00
Prarit Bhargava d70e551c8e [libata] Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist
A user has several systems with a couple of models of flash disks with IDE
connectors.  These disks work fine in 2.6.18-ish kernels but corrupt data on
new kernels.

The difference appears to be with the default I/O method used by the IDE
controller driver between the kernels.  In the older kernels, the
configuration is very conservative and the driver stays in PIO mode.  With
new kernels, the ata driver (pata_serverworks) attempts to use UDMA/66
which the drive claims to support.  This mode, however, does not appear to
work in DMA mode.  The drive does work correctly and no corruption is
seen if the kernel parameter "libata.force=5:pio0,6:pio0" is used to force
the driver to use PIO instead of DMA mode.

Blacklist these drives.  Unfortunately the model name of the drive is very
generic, " 2GB ATA Flash Disk", but the revision is specific, "ADMA428M".

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-22 16:02:14 -04:00
Andi Kleen 47ee9108c1 ata_generic: Skip is_intel_ider() check when ata_generic=1 is set
When ata_generic_ide=1 is set don't do the is_intel_ider() magic
check. We found at least one box who needed that.

Cc: alan@linux.intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-22 15:54:13 -04:00
Arnd Bergmann 3c0dec5f58 Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into next/clock
* 'clk-next' of git://git.linaro.org/people/mturquette/linux:
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ARM: Orion: SDIO: Add support for clk.
  ARM: Orion: NAND: Add support for clk, if there is one.
  ARM: Orion: EHCI: Add support for enabling clocks
  ARM: Orion: SATA: Add per channel clk/clkdev support.
  ARM: Orion: UART: Get the clock rate via clk_get_rate().
  ARM: Orion: WDT: Add clk/clkdev support
  ARM: Orion: Eth: Add clk/clkdev support.
  ARM: Orion: SPI: Add clk/clkdev support.
  ARM: Orion: Add clocks using the generic clk infrastructure.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-16 16:35:25 +02:00
Andrew Lunn eee989902a ARM: Orion: SATA: Add per channel clk/clkdev support.
The Orion kirkwood chips have a gatable clock per SATA channel. Add
code to get and enable this clk if it exists.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:33:58 -07:00
Mark Lord 8d899e70c1 libata-eh don't waste time retrying media errors (v3)
ATA and SATA drives have had built-in retries for media errors
for as long as they've been commonplace in computers (early 1990s).

When libata stumbles across a bad sector, it can waste minutes
sitting there doing retry after retry before finally giving up
and letting the higher layers deal with it.

This patch removes retries for media errors only.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-07 15:40:34 -04:00
Andy Whitcroft cd006086fa ata_piix: defer disks to the Hyper-V drivers by default
When we are hosted on a Microsoft Hyper-V hypervisor the guest disks
are exposed both via the Hyper-V paravirtualised drivers and via an
emulated SATA disk drive.  In this case we want to use the paravirtualised
drivers if we can as they are much more efficient.  Note that the Hyper-V
paravirtualised drivers only expose the virtual hard disk devices, the
CDROM/DVD devices must still be enumerated.

Mark the host controller ATA_HOST_IGNORE_ATA to prevent enumeration of
disk devices.

BugLink: http://bugs.launchpad.net/bugs/929545
BugLink: http://bugs.launchpad.net/bugs/942316
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-07 15:32:58 -04:00
Andy Whitcroft db63a4c811 libata: add a host flag to ignore detected ATA devices
Where devices are visible via more than one host we sometimes wish to
indicate that cirtain devices should be ignored on a specific host.  Add a
host flag indicating that this host wishes to ignore ATA specific devices.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-07 15:32:23 -04:00
Linus Torvalds 6b4c555a6b Change summary:
1) Fix regression that could cause a misdiagnosis, which in turn could
    lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug
    and suspend/resume is involved.
 
 2) Fix a regression that led to ata%d controller ids being numbered one
    larger than in <= 3.4-rc3 (oh, the horror!).  Controller ids should now be
    as expected.
 
 3) add some DT, PCI id's
 
 4) ata/pata_arasan_cf: minor cpp fixing/cleaning
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT6LKvSWzCDIBeCsvAQIq2BAAikXKo+1ZVjeG4qRQvjCLFC0vaP7Roflr
 aWpcl4Dmrq3MFw7L69uUnYnZETaBETiMuXYqj8ysaB6EUZHcXYUvgK96iWU4+gmb
 rLVXj5KJqMREQiAxwvYhhYYEsJHeKWSdNJKhCJPL9knfDzrB8rYznfSSZCpBNazk
 cKPJFBQJbIfbhtJce1QRatnT0B7bEJongnEmNiaBKoUyfdJslUw7XqfxwWRGphwg
 QGJez8GPDKPRnKL9d8j1zoDjTTrSSPCkpyGwl66cGov65CRFJKekanz9l7+E5ztY
 Uzyce/ew3VUXYFErIJUGzVu9pdBWdYnrDHvnvMbOgiy2kUfdVLNfQ3p8mToHTaN7
 SBuzrNwG+UxSMMioXdE4yLaQ8mI2xY4XC6iaHHSb0f30xmzCvLRZ8FbOXM/gETAd
 s65lLC+9ebrmVdz15MLLbJsjgnovpgMehpjAZ6EZhKxbw0oAnybrRLceilKBDSkl
 gzjK38HKZke08EZ0t5QsNOPV878ELY0exl724YRk35W5kTJkvUptFDmbgJ5s/uAx
 BJinG2xHGp0HAbdSfxrFbBmUjlCO0cmdUWVk7ZxvEsWQ7EGmLleCFFSbCeTWA6Ah
 QRDZpEWA9wjku1Q6d05KYfz364nUksKds1VobHCOwodsPdWdWs59oYbNf38Gu/mh
 qlgFHFVU/j0=
 =c7fz
 -----END PGP SIGNATURE-----

Merge tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata fixes from Jeff Garzik:

1) Fix regression that could cause a misdiagnosis, which in turn could
   lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug
   and suspend/resume is involved.

2) Fix a regression that led to ata%d controller ids being numbered one
   larger than in <= 3.4-rc3 (oh, the horror!).  Controller ids should now be
   as expected.

3) add some DT, PCI id's

4) ata/pata_arasan_cf: minor cpp fixing/cleaning

* tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
  ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  libata: init ata_print_id to 0
  ahci: Detect Marvell 88SE9172 SATA controller
  libata: skip old error history when counting probe trials
2012-05-03 17:16:52 -07:00
Viresh Kumar 5f098a3ea7 ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares
ahci_platform driver with other controller versions.

This patch updates DT compatible list for ahci_platform. It also updates and
renames binding documentation to more generic name.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03 14:08:53 -04:00
Viresh Kumar fb9751d471 ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move
this definition and its usage outside of them.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-05-03 14:08:03 -04:00