Граф коммитов

19 Коммитов

Автор SHA1 Сообщение Дата
Russell King aa8d187315 [ARM] Remove OP_MAX_COUNTER
OP_MAX_COUNTER never referenced, and is a reminant of an earlier
oprofile implementation.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-14 15:15:40 +00:00
Russell King 2326eb985b [ARM] Fix fallout from IRQ regs changes
Some ARM platforms were still broken as a result of the IRQ register
passing changes, mostly due to a missing linux/irq.h include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-15 13:48:37 +01:00
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00
Lennert Buytenhek c5d311c7e9 [ARM] 3880/1: remove the last trace of iop31x support
Remove the last trace of iop31x support from the kernel.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-30 11:30:47 +01:00
Lennert Buytenhek c852ac8044 [ARM] 3832/1: iop3xx: coding style cleanup
Since the iop32x code isn't iop321-specific, and the iop33x code isn't
iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up
the code to conform to the coding style guidelines somewhat better.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:53 +01:00
Lennert Buytenhek 98954df691 [ARM] 3816/1: iop3xx: rename config symbols
Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and
CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:34 +01:00
Thomas Gleixner 52e405eaa9 [PATCH] ARM: fixup irqflags breakage after ARM genirq merge
The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 17:29:22 -07:00
Russell King 58e9ff5638 [ARM] Use kcalloc to allocate counter_config array rather than kmalloc
We need this to be zero initialised.  Since this is an array, use kcalloc
rather than kzalloc or kmalloc.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 23:30:02 +00:00
Russell King ae92dc9f7b [ARM] Oprofile: dynamically allocate counter_config
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 23:30:02 +00:00
Russell King 93ad79496c [ARM] Oprofile: Convert semaphore to mutex
op_arm_sem is being used as a mutex, so convert it to use
real mutexes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 23:30:00 +00:00
Russ Dill 7610dfa372 [ARM] 3295/1: Fix oprofile init return value
Patch from Russ Dill

The oprofile init code was broken in commit c6b9da. The new logic will
always return -ENODEV. This fixes oprofile_arch_init to return 0 on
success, and return the return value of spec->init() if applicable.

Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01 21:07:28 +00:00
Hugh Dickins c34d1b4d16 [PATCH] mm: kill check_user_page_readable
check_user_page_readable is a problematic variant of follow_page.  It's used
only by oprofile's i386 and arm backtrace code, at interrupt time, to
establish whether a userspace stackframe is currently readable.

This is problematic, because we want to push the page_table_lock down inside
follow_page, and later split it; whereas oprofile is doing a spin_trylock on
it (in the i386 case, forgotten in the arm case), and needs that to pin
perhaps two pages spanned by the stackframe (which might be covered by
different locks when we split).

I think oprofile is going about this in the wrong way: it doesn't need to know
the area is readable (neither i386 nor arm uses read protection of user
pages), it doesn't need to pin the memory, it should simply
__copy_from_user_inatomic, and see if that succeeds or not.  Sorry, but I've
not got around to devising the sparse __user annotations for this.

Then we can eliminate check_user_page_readable, and return to a single
follow_page without the __follow_page variants.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:41 -07:00
Russell King c6b9dafce3 [ARM] 4/4 Combine oprofile common and init code
There is nothing special about having the init code separate from
the common code, so combine the two.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 14:56:04 +01:00
Russell King 55f052341f [ARM] 3/4 Rename common oprofile code
The common oprofile code assumes the name "PMU" (from Intel's
performance management unit).  This is misleading when we
start adding oprofile support for other machine types which
don't use the same terminology.  Call it op_arm_* instead of
pmu_*.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 14:54:21 +01:00
Russell King 7c5b3fc208 [ARM] 2/4 Fix oprofile suspend/resume
The oprofile suspend/resume was missing locking.  If we failed
to start oprofile on resume, we still reported that it was
enabled.  Instead, disable oprofile on error.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 14:52:30 +01:00
Russell King b5893c56ca [ARM] 1/4 Move oprofile driver model code
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 14:51:15 +01:00
Richard Purdie c013622d5f [PATCH] ARM: 2838/1: Fix arm oprofile backtrace warning
Patch from Richard Purdie

Fix a typo causing a warning in the arm oprofile backtrace code.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-04 15:06:59 +01:00
Richard Purdie fa0ebff62a [PATCH] ARM: 2761/1: OProfile: Add call graphing support for arm
Patch from Richard Purdie

Add functions to generate backtraces of both kernel and user processes
which allows oprofile's call graphing functionality to be used on arm.
This requires unstripped binaries/libs which use a frame pointer.

Signed-off-by: Richard Purdie
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-28 21:01:03 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00