Граф коммитов

234 Коммитов

Автор SHA1 Сообщение Дата
Andreas Gruenbacher 9e8990dea9 gfs2: Smarter iopen glock waiting
When trying to upgrade the iopen glock from a shared to an exclusive lock in
gfs2_evict_inode, abort the wait if there is contention on the corresponding
inode glock: in that case, the inode must still be in active use on another
node, and we're not guaranteed to get the iopen glock anytime soon.

To make this work even better, when we notice contention on the iopen glock and
we can't evict the corresponsing inode and release the iopen glock immediately,
poke the inode glock.  The other node(s) trying to acquire the lock can then
abort instead of timing out.

Thanks to Heinz Mauelshagen for pointing out a locking bug in a previous
version of this patch.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-06-05 20:19:21 +02:00
Andreas Gruenbacher 9e73330f29 gfs2: Try harder to delete inodes locally
When an inode's link count drops to zero and the inode is cached on
other nodes, the current behavior of gfs2 is to immediately give up and
to rely on the other node(s) to delete the inode if there is iopen glock
contention.  This leads to resource group glock bouncing and the loss of
caching.  With the previous patches in place, we can fix that by not
giving up immediately.

When the inode is still open on other nodes, those nodes won't be able
to evict the inode and give up the iopen glock.  In that case, our lock
conversion request will time out.  The unlink system call will block for
the duration of the iopen lock conversion request.  We're also holding
the inode glock in EX mode for an extended duration, so other nodes
won't be able to make progress on the inode, either.

This is worse than what we had before, but we can prevent other nodes
from getting stuck by aborting our iopen locking request if there is
contention on the inode glock.  This will the the subject of a future
patch.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-06-05 20:19:21 +02:00
Andreas Gruenbacher 8c7b9262a8 gfs2: Give up the iopen glock on contention
When there's contention on the iopen glock, it means that the link count
of the corresponding inode has dropped to zero on a remote node which is
now trying to delete the inode.  In that case, try to evict the inode so
that the iopen glock will be released, which will allow the remote node
to do its job.

When the inode is still open locally, the inode's reference count won't
drop to zero and so we'll keep holding the inode and its iopen glock.
The remote node will time out its request to grab the iopen glock, and
when the inode is finally closed locally, we'll try to delete it
ourself.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-06-05 20:19:21 +02:00
Andreas Gruenbacher a0e3cc65fa gfs2: Turn gl_delete into a delayed work
This requires flushing delayed work items in gfs2_make_fs_ro (which is called
before unmounting a filesystem).

When inodes are deleted and then recreated, pending gl_delete work items would
have no effect because the inode generations will have changed, so we can
cancel any pending gl_delete works before reusing iopen glocks.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-06-05 20:19:21 +02:00
Andreas Gruenbacher f286d627ef gfs2: Keep track of deleted inode generations in LVBs
When deleting an inode, keep track of the generation of the deleted inode in
the inode glock Lock Value Block (LVB).  When trying to delete an inode
remotely, check the last-known inode generation against the deleted inode
generation to skip duplicate remote deletes.  This avoids taking the resource
group glock in order to verify the block type.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-06-05 20:19:20 +02:00
Bob Peterson 2297ab6144 gfs2: Fix problems regarding gfs2_qa_get and _put
This patch fixes a couple of places in which gfs2_qa_get and gfs2_qa_put are
not balanced: we now keep references around whenever a file is open for writing
(see gfs2_open_common and gfs2_release), so we need to put all references we
grab in function gfs2_create_inode.  This was broken in the successful case and
on one error path.

This also means that we don't have a reference to put in gfs2_evict_inode.

In addition, gfs2_qa_put was called for the wrong inode in gfs2_link.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-05-08 18:45:11 +02:00
Andreas Gruenbacher 1595548fe7 gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
Keeping reservations and quotas separate helps reviewing the code.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-03-27 14:08:04 -05:00
Bob Peterson 2fba46a04c gfs2: Change inode qa_data to allow multiple users
Before this patch, multiple users called gfs2_qa_alloc which allocated
a qadata structure to the inode, if quotas are turned on. Later, in
file close or evict, the structure was deleted with gfs2_qa_delete.
But there can be several competing processes who need access to the
structure. There were races between file close (release) and the others.
Thus, a release could delete the structure out from under a process
that relied upon its existence. For example, chown.

This patch changes the management of the qadata structures to be
a get/put scheme. Function gfs2_qa_alloc has been changed to gfs2_qa_get
and if the structure is allocated, the count essentially starts out at
1. Function gfs2_qa_delete has been renamed to gfs2_qa_put, and the
last guy to decrement the count to 0 frees the memory.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-03-27 14:08:04 -05:00
Andreas Gruenbacher 969183bc68 gfs2: Switch to list_{first,last}_entry
Replace open-coded versions of list_first_entry and list_last_entry with those
functions.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-03-27 14:08:04 -05:00
Andreas Gruenbacher 40e7e86ef1 gfs2: Clean up inode initialization and teardown
When allocating a new inode, mark the iopen glock holder as uninitialized to
make sure gfs2_evict_inode won't fail after an incomplete create or lookup.  In
gfs2_evict_inode, allow the inode glock to be NULL and remove the duplicate
iopen glock teardown code.  In gfs2_inode_lookup, don't tear down things that
gfs2_evict_inode will already tear down.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-03-27 14:08:04 -05:00
Bob Peterson 601ef0d52e gfs2: Force withdraw to replay journals and wait for it to finish
When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.

This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.

The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.

Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.

The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.

Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.

Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.

We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.

Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.

For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-02-27 07:53:12 -06:00
Bob Peterson 52b1cdcb7a gfs2: Abort gfs2_freeze if io error is seen
Before this patch, an io error, such as -EIO writing to the journal
would cause function gfs2_freeze to go into an infinite loop,
continuously retrying the freeze operation. But nothing ever clears
the -EIO except unmount after withdraw, which is impossible if the
freeze operation never ends (fails). Instead you get:

[ 6499.767994] gfs2: fsid=dm-32.0: error freezing FS: -5
[ 6499.773058] gfs2: fsid=dm-32.0: retrying...
[ 6500.791957] gfs2: fsid=dm-32.0: error freezing FS: -5
[ 6500.797015] gfs2: fsid=dm-32.0: retrying...

This patch adds a check for -EIO in gfs2_freeze, and if seen, it
dequeues the freeze glock, aborts the loop and returns the error.
Also, there's no need to pass the freeze holder to function
gfs2_lock_fs_check_clean since it's only called in one place and
it's a well-known superblock pointer, so this simplifies that.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-11-15 17:57:30 +01:00
Bob Peterson 60528afa78 gfs2: Don't loop forever in gfs2_freeze if withdrawn
Before this patch, function gfs2_freeze would loop forever if the
filesystem it tries to freeze is withdrawn. That's because function
gfs2_lock_fs_check_clean tries to enqueue the glock of the journal and
the gfs2_glock returns -EIO because you can't enqueue a journaled glock
after a withdraw.

Move the check for file system withdraw inside the loop so that the loop
can end when withdraw occurs.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-11-14 19:47:05 +01:00
Bob Peterson eb43e660c0 gfs2: Introduce function gfs2_withdrawn
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN
bit to call it. This does not change the logic or function of gfs2, and
it facilitates later improvements to the withdraw sequence.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-11-14 19:46:18 +01:00
Linus Torvalds 0b36c9eed2 Merge branch 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more mount API conversions from Al Viro:
 "Assorted conversions of options parsing to new API.

  gfs2 is probably the most serious one here; the rest is trivial stuff.

  Other things in what used to be #work.mount are going to wait for the
  next cycle (and preferably go via git trees of the filesystems
  involved)"

* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  gfs2: Convert gfs2 to fs_context
  vfs: Convert spufs to use the new mount API
  vfs: Convert hypfs to use the new mount API
  hypfs: Fix error number left in struct pointer member
  vfs: Convert functionfs to use the new mount API
  vfs: Convert bpf to use the new mount API
2019-09-24 12:33:34 -07:00
Andrew Price 1f52aa08d1 gfs2: Convert gfs2 to fs_context
Convert gfs2 and gfs2meta to fs_context. Removes the duplicated vfs code
from gfs2_mount and instead uses the new vfs_get_block_super() before
switching the ->root to the appropriate dentry.

The mount option parsing has been converted to the new API and error
reporting for invalid options has been made more precise at the same
time.

All of the mount/remount code has been moved into ops_fstype.c

Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: cluster-devel@redhat.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-18 22:47:05 -04:00
Andreas Gruenbacher d40312598d gfs2: Minor gfs2_alloc_inode cleanup
In gfs2_alloc_inode, when kmem_cache_alloc cannot allocate a new object, return
NULL immediately.  The code currently relies on the fact that i_inode is the
first member in struct gfs2_inode and so ip and &ip->i_inode evaluate to the
same address, but that isn't immediately obvious.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2019-08-09 17:00:52 +01:00
Bob Peterson f29e62eed2 gfs2: replace more printk with calls to fs_info and friends
This patch replaces a few leftover printk errors with calls to
fs_info and similar, so that the file system having the error is
properly logged.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-27 21:30:27 +02:00
Bob Peterson 55317f5b00 gfs2: simplify gfs2_freeze by removing case
Function gfs2_freeze had a case statement that simply checked the
error code, but the break statements just made the logic hard to
read. This patch simplifies the logic in favor of a simple if.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-27 21:26:58 +02:00
Bob Peterson 04aea0ca14 gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWN
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-27 21:26:35 +02:00
Bob Peterson 5b3a9f348b gfs2: kthread and remount improvements
Before this patch, gfs2 saved the pointers to the two daemon threads
(logd and quotad) in the superblock, but they were never cleared,
even if the threads were stopped (e.g. on remount -o ro). That meant
that certain error conditions (like a withdrawn file system) could
race. For example, xfstests generic/361 caused an IO error during
remount -o ro, which caused the kthreads to be stopped, then the
error flagged. Later, when the test unmounted the file system, it
would try to stop the threads a second time with kthread_stop.

This patch does two things: First, every time it stops the threads
it zeroes out the thread pointer, and also checks whether it's NULL
before trying to stop it. Second, in function gfs2_remount_fs, it
was returning if an error was logged by either of the two functions
for gfs2_make_fs_ro and _rw, which caused it to bypass the online
uevent at the bottom of the function. This removes that bypass in
favor of just running the whole function, then returning the error.
That way, unmounts and remounts won't hang forever.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-27 21:03:43 +02:00
Linus Torvalds 9331b6740f SPDX update for 5.2-rc4
Another round of SPDX header file fixes for 5.2-rc4
 
 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
 added, based on the text in the files.  We are slowly chipping away at
 the 700+ different ways people tried to write the license text.  All of
 these were reviewed on the spdx mailing list by a number of different
 people.
 
 We now have over 60% of the kernel files covered with SPDX tags:
 	$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
 	Files checked:            64533
 	Files with SPDX:          40392
 	Files with errors:            0
 
 I think the majority of the "easy" fixups are now done, it's now the
 start of the longer-tail of crazy variants to wade through.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
 sxVEiFZo8ZU9v1IoRb1I
 =qU++
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull yet more SPDX updates from Greg KH:
 "Another round of SPDX header file fixes for 5.2-rc4

  These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
  added, based on the text in the files. We are slowly chipping away at
  the 700+ different ways people tried to write the license text. All of
  these were reviewed on the spdx mailing list by a number of different
  people.

  We now have over 60% of the kernel files covered with SPDX tags:
	$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
	Files checked:            64533
	Files with SPDX:          40392
	Files with errors:            0

  I think the majority of the "easy" fixups are now done, it's now the
  start of the longer-tail of crazy variants to wade through"

* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
  ...
2019-06-08 12:52:42 -07:00
Bob Peterson 638803d456 Revert "gfs2: Replace gl_revokes with a GLF flag"
Commit 73118ca8ba introduced a glock reference counting bug in
gfs2_trans_remove_revoke.  Given that, replacing gl_revokes with a GLF flag is
no longer useful, so revert that commit.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-06 16:29:26 +02:00
Thomas Gleixner 7336d0e654 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398
Based on 1 normalized pattern(s):

  this copyrighted material is made available to anyone wishing to use
  modify copy or redistribute it subject to the terms and conditions
  of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 44 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:12 +02:00
Abhi Das f4686c26ec gfs2: read journal in large chunks
Use bios to read in the journal into the address space of the journal inode
(jd_inode), sequentially and in large chunks.  This is faster for locating the
journal head that the previous binary search approach.  When performing
recovery, we keep the journal in the address space until recovery is done,
which further speeds up things.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:15 +02:00
Abhi Das 8f91821990 gfs2: fix race between gfs2_freeze_func and unmount
As part of the freeze operation, gfs2_freeze_func() is left blocking
on a request to hold the sd_freeze_gl in SH. This glock is held in EX
by the gfs2_freeze() code.

A subsequent call to gfs2_unfreeze() releases the EXclusively held
sd_freeze_gl, which allows gfs2_freeze_func() to acquire it in SH and
resume its operation.

gfs2_unfreeze(), however, doesn't wait for gfs2_freeze_func() to complete.
If a umount is issued right after unfreeze, it could result in an
inconsistent filesystem because some journal data (statfs update) isn't
written out.

Refer to commit 24972557b1 for a more detailed explanation of how
freeze/unfreeze work.

This patch causes gfs2_unfreeze() to wait for gfs2_freeze_func() to
complete before returning to the user.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Andreas Gruenbacher ce895cf15a gfs2: Remove misleading comments in gfs2_evict_inode
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Bob Peterson 73118ca8ba gfs2: Replace gl_revokes with a GLF flag
The gl_revokes value determines how many outstanding revokes a glock has
on the superblock revokes list; this is used to avoid unnecessary log
flushes.  However, gl_revokes is only ever tested for being zero, and it's
only decremented in revoke_lo_after_commit, which removes all revokes
from the list, so we know that the gl_revoke values of all the glocks on
the list will reach zero.  Therefore, we can replace gl_revokes with a
bit flag. This saves an atomic counter in struct gfs2_glock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-05-07 23:39:14 +02:00
Al Viro 784494e1d7 gfs2: switch to ->free_inode()
... and use GFS2_I() to get the containing gfs2_inode by inode;
yes, we can feed the address of the first member of structure
to kmem_cache_free(), but let's do it in an obviously safe way.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-01 22:43:24 -04:00
Bob Peterson 23e93c9b2c Revert "gfs2: read journal in large chunks to locate the head"
This reverts commit 2a5f14f279.

This patch causes xfstests generic/311 to fail. Reverting this for
now until we have a proper fix.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-14 09:52:51 -08:00
Abhi Das 2a5f14f279 gfs2: read journal in large chunks to locate the head
Use bio(s) to read in the journal sequentially in large chunks and
locate the head of the journal.

This version addresses the issues Christoph pointed out w.r.t error handling
and using deprecated API.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
2018-12-11 17:50:36 +01:00
Bob Peterson 8e31582a9a gfs2: Fix minor typo: couln't versus couldn't.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-10-19 11:34:04 -05:00
Tim Smith 1eb8d73879 GFS2: Flush the GFS2 delete workqueue before stopping the kernel threads
Flushing the workqueue can cause operations to happen which might
call gfs2_log_reserve(), or get stuck waiting for locks taken by such
operations.  gfs2_log_reserve() can io_schedule(). If this happens, it
will never wake because the only thing which can wake it is gfs2_logd()
which was already stopped.

This causes umount of a gfs2 filesystem to wedge permanently if, for
example, the umount immediately follows a large delete operation.

When this occured, the following stack trace was obtained from the
umount command

[<ffffffff81087968>] flush_workqueue+0x1c8/0x520
[<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2]
[<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2]
[<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100
[<ffffffff811b7ff7>] kill_block_super+0x27/0x70
[<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2]
[<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70
[<ffffffff811b79b9>] deactivate_super+0x59/0x60
[<ffffffff811d2998>] cleanup_mnt+0x58/0x80
[<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20
[<ffffffff8108c87d>] task_work_run+0x7d/0xa0
[<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98
[<ffffffff81003961>] syscall_return_slowpath+0x41/0x50
[<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Tim Smith <tim.smith@citrix.com>
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-10-09 07:05:36 -05:00
Andreas Gruenbacher a3479c7fc0 Merge branch 'iomap-write' into linux-gfs2/for-next
Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_block_map.  Implement iomap write support for buffered and
direct I/O.  Simplify some of the existing code and eliminate code that
is no longer used:

  gfs2: Remove gfs2_write_{begin,end}
  gfs2: iomap direct I/O support
  gfs2: gfs2_extent_length cleanup
  gfs2: iomap buffered write support
  gfs2: Further iomap cleanups

This is based on the following changes on the xfs 'iomap-4.19-merge'
branch:

  iomap: add private pointer to struct iomap
  iomap: add a page_done callback
  iomap: generic inline data handling
  iomap: complete partial direct I/O writes synchronously
  iomap: mark newly allocated buffer heads as new
  fs: factor out a __generic_write_end helper

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-07-24 20:02:40 +02:00
Andreas Gruenbacher b7eba890a2 gfs2: Eliminate redundant ip->i_rgd
GFS2 remembers the last rgrp used for allocations in ip->i_rgd.
However, block allocations are made by way of a reservations structure,
ip->i_res, which keeps the last rgrp in ip->i_res.rs_rgd, and ip->i_res
is kept in sync with ip->i_res.rs_rgd, so it's redundant.  Get rid of
ip->i_rgd and just use ip->i_res.rs_rgd in its place.

Based on patches by Robert Peterson.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-07-05 17:47:16 +02:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Christoph Hellwig 0e11f6443f fs: move I_DIRTY_INODE to fs.h
And use it in a few more places rather than opencoding the values.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-28 01:39:02 -04:00
Abhi Das 957a7acd46 gfs2: Remove inode from ordered write list in gfs2_write_inode()
The vfs clears the I_DIRTY inode flag before calling gfs2_write_inode()
having queued any data that needed to be written to disk.
This is a good time to remove such inodes from our ordered write list
so they don't hang around for long periods of time.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-30 10:00:27 -07:00
Bob Peterson 805c090750 GFS2: Log the reason for log flushes in every log header
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23 07:39:20 -07:00
Bob Peterson c1696fb85d GFS2: Introduce new gfs2_log_header_v2
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible).  Some of these are used for
debug purposes so we can backtrack when problems occur.  Others are
reserved for future expansion.

This patch is based on a prototype from Steve Whitehouse.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23 07:38:53 -07:00
Linus Torvalds 1751e8a6cb Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Bob Peterson adbc3ddf28 GFS2: flush the log and all pages for jdata as we do for WB_SYNC_ALL
In function gfs2_write_inode, starting with patch a9185b41a4, we
only flush the log and call filemap_fdatawait if we're passed in a
wbc sync_mode of WB_SYNC_ALL. We also need to do these things if
we're evicting a jdata inode, because we might have jdata pages
still attached to bufdata descriptors that need to be revoked, but
by the time it gets to evict() it's too late to start a new
transaction. This patch changes it to treat jdata inodes as if
WB_SYNC_ALL had been specified.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
2017-10-31 14:26:35 +01:00
Linus Torvalds 0f0d12728e Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount flag updates from Al Viro:
 "Another chunk of fmount preparations from dhowells; only trivial
  conflicts for that part. It separates MS_... bits (very grotty
  mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
  only a small subset of MS_... stuff).

  This does *not* convert the filesystems to new constants; only the
  infrastructure is done here. The next step in that series is where the
  conflicts would be; that's the conversion of filesystems. It's purely
  mechanical and it's better done after the merge, so if you could run
  something like

	list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')

	sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
	        -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
	        -e 's/\<MS_NODEV\>/SB_NODEV/g' \
	        -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
	        -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
	        -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
	        -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
	        -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
	        -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
	        -e 's/\<MS_SILENT\>/SB_SILENT/g' \
	        -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
	        -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
	        -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
	        -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
	        $list

  and commit it with something along the lines of 'convert filesystems
  away from use of MS_... constants' as commit message, it would save a
  quite a bit of headache next cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Differentiate mount flags (MS_*) from internal superblock flags
  VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
  vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14 18:54:01 -07:00
Bob Peterson 942b0cddfb GFS2: Withdraw for IO errors writing to the journal or statfs
Before this patch, if GFS2 encountered IO errors while writing to
the journal, it would not report the problem, so they would go
unnoticed, sometimes for many hours. Sometimes this would only be
noticed later, when recovery tried to do journal replay and failed
due to invalid metadata at the blocks that resulted in IO errors.

This patch makes GFS2's log daemon check for IO errors. If it
encounters one, it withdraws from the file system and reports
why in dmesg. A similar action is taken when IO errors occur when
writing to the system statfs file.

These errors are also reported back to any callers of fsync, since
that requires the journal to be flushed. Therefore, any IO errors
that would previously go unnoticed are now noticed and the file
system is withdrawn as early as possible, thus preventing further
file system damage.

Also note that this reintroduces superblock variable sd_log_error,
which Christoph removed with commit f729b66fca.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-25 10:59:09 -05:00
Andreas Gruenbacher 6a1c8f6dcf gfs2: Defer deleting inodes under memory pressure
When under memory pressure and an inode's link count has dropped to
zero, defer deleting the inode to the delete workqueue.  This avoids
calling into DLM under memory pressure, which can deadlock.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-10 10:49:13 -05:00
Andreas Gruenbacher 71c1b21368 gfs2: gfs2_evict_inode: Put glocks asynchronously
gfs2_evict_inode is called to free inodes under memory pressure.  The
function calls into DLM when an inode's last cluster-wide reference goes
away (remote unlink) and to release the glock and associated DLM lock
before finally destroying the inode.  However, if DLM is blocked on
memory to become available, calling into DLM again will deadlock.

Avoid that by decoupling releasing glocks from destroying inodes in that
case: with gfs2_glock_queue_put, glocks will be dequeued asynchronously
in work queue context, when the associated inodes have likely already
been destroyed.

With this change, inodes can end up being unlinked, remote-unlink can be
triggered, and then the inode can be reallocated before all
remote-unlink callbacks are processed.  To detect that, revalidate the
link count in gfs2_evict_inode to make sure we're not deleting an
allocated, referenced inode.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-10 10:45:21 -05:00
Andreas Gruenbacher 61b91cfdc6 gfs2: Fix trivial typos
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-09 09:36:39 -05:00
Bob Peterson b2fb7dab7f GFS2: Delete debugfs files only after we evict the glocks
This patch moves the call to gfs2_delete_debugfs_file so that it
comes after the glock hash table has been cleared. This way we
can query the debugfs files if umount hangs.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-09 09:36:39 -05:00
Bob Peterson 240c6235df GFS2: Clear gl_object when deleting an inode in gfs2_delete_inode
This patch adds some calls to clear gl_object in function
gfs2_delete_inode. Since we are deleting the inode, and the glock
typically outlives the inode in core, we must clear gl_object
so subsequent use of the glock (e.g. for a new inode in its place)
will not have the old pointer sitting there. In error cases we
need to tidy up after ourselves. In non-error cases, we need to
clear gl_object before we set the block free in the bitmap so
residules aren't left for potential inode creators.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2017-08-09 09:36:38 -05:00
Bob Peterson df3d87bde1 GFS2: Introduce helper for clearing gl_object
This patch introduces a new helper function in glock.h that
clears gl_object, with an added integrity check. An additional
integrity check has been added to glock_set_object, plus comments.
This is step 1 in a series to ensure gl_object integrity.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2017-07-21 08:20:05 -05:00