Граф коммитов

63 Коммитов

Автор SHA1 Сообщение Дата
Will Deacon a3287c41ff drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPU
Since the PMU register interface is banked per CPU, CPU PMU interrrupts
cannot be handled by a CPU other than the one with the PMU asserting the
interrupt. This means that migrating PMU SPIs, as we do during a CPU
hotplug operation doesn't make any sense and can lead to the IRQ being
disabled entirely if we route a spurious IRQ to the new affinity target.

This has been observed in practice on AMD Seattle, where CPUs on the
non-boot cluster appear to take a spurious PMU IRQ when coming online,
which is routed to CPU0 where it cannot be handled.

This patch passes IRQF_PERCPU for PMU SPIs and forcefully sets their
affinity prior to requesting them, ensuring that they cannot
be migrated during hotplug events. This interacts badly with the DB8500
erratum workaround that ping-pongs the interrupt affinity from the handler,
so we avoid passing IRQF_PERCPU in that case by allowing the IRQ flags
to be overridden in the platdata.

Fixes: 3cf7ee98b8 ("drivers/perf: arm_pmu: move irq request/free into probe")
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-27 13:43:22 +01:00
Neil Leeder 6c17c1c309 perf: qcom_l2: fix column exclusion check
The check for column exclusion did not verify that the event being
checked was an L2 event, and not a software event.
Software events should not be checked for column exclusion.
This resulted in a group with both software and L2 events sometimes
incorrectly rejecting the L2 event for column exclusion and
not counting it.

Add a check for PMU type before applying column exclusion logic.

Fixes: 21bdbb7102 ("perf: add qcom l2 cache perf events driver")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-26 09:27:43 +01:00
Rob Herring 5f4216f49b perf: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-20 10:28:41 +01:00
Will Deacon 3edb1dd13c Merge branch 'aarch64/for-next/ras-apei' into aarch64/for-next/core
Merge in arm64 ACPI RAS support (APEI/GHES) from Tyler Baicar.
2017-06-26 10:54:27 +01:00
Hoan Tran c0f7f7acde perf: xgene: Add support for SoC PMU version 3
This patch adds support for SoC-wide (AKA uncore) Performance Monitoring
Unit version 3.

It can support up to
 - 2 IOB PMU instances
 - 8 L3C PMU instances
 - 2 MCB PMU instances
 - 8 MCU PMU instances
and these PMUs support 64 bit counter

Signed-off-by: Hoan Tran <hotran@apm.com>
[Mark: stop counters in _xgene_pmu_isr()]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: make xgene_pmu_v3_ops static]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-22 20:16:34 +01:00
Hoan Tran e35e0a04a9 perf: xgene: Move PMU leaf functions into function pointer structure
This patch moves PMU leaf functions into a function pointer structure.
It helps code maintain and expasion easier.

Signed-off-by: Hoan Tran <hotran@apm.com>
[Mark: remove redundant cast]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: make xgene_pmu_ops static]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-22 20:16:18 +01:00
Hoan Tran 838955e2a3 perf: xgene: Parse PMU subnode from the match table
This patch parses PMU Subnode from a match table.

Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-22 19:30:09 +01:00
Mark Rutland bddb9b68d3 drivers/perf: commonise PERF_EVENTS dependency
All PMU drivers are going to depend on PERF_EVENTS, so let's make this
dependency common and simplify the individual Kconfig entries.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-15 11:10:33 +01:00
Wei Huang 477c50e8dc drivers/perf: arm_pmu_acpi: avoid perf IRQ init when guest PMU is off
We saw perf IRQ init failures when running Linux kernel in an ACPI
guest without PMU (i.e. pmu=off). This is because perf IRQ is not
present when pmu=off, but arm_pmu_acpi still tries to register
or unregister GSI. This patch addresses the problem by checking
gicc->performance_interrupt. If it is 0, which is the value set
by qemu when pmu=off, we skip the IRQ register/unregister process.

[    4.069470] bc00: 0000000000040b00 ffff0000089db190
[    4.070267] [<ffff000008134f80>] enable_percpu_irq+0xdc/0xe4
[    4.071192] [<ffff000008667cc4>] arm_perf_starting_cpu+0x108/0x10c
[    4.072200] [<ffff0000080cbdd4>] cpuhp_invoke_callback+0x14c/0x4ac
[    4.073210] [<ffff0000080ccd3c>] cpuhp_thread_fun+0xd4/0x11c
[    4.074132] [<ffff0000080f1394>] smpboot_thread_fn+0x1b4/0x1c4
[    4.075081] [<ffff0000080ec90c>] kthread+0x10c/0x138
[    4.075921] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
[    4.076947] genirq: Setting trigger mode 4 for irq 43 failed
(gic_set_type+0x0/0x74)

Signed-off-by: Wei Huang <wei@redhat.com>
[will: add comment justifying deviation from ACPI spec, removed redundant hunk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-30 12:40:03 +01:00
Mark Rutland 45736a72fb drivers/perf: arm_pmu: add ACPI framework
This patch adds framework code to handle parsing PMU data out of the
MADT, sanity checking this, and managing the association of CPUs (and
their interrupts) with appropriate logical PMUs.

For the time being, we expect that only one PMU driver (PMUv3) will make
use of this, and we simply pass in a single probe function.

This is based on an earlier patch from Jeremy Linton.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:54 +01:00
Mark Rutland 18bfcfe51b drivers/perf: arm_pmu: split out platform device probe logic
Now that we've split the pdev and DT probing logic from the runtime
management, let's move the former into its own file. We gain a few lines
due to the copyright header and includes, but this should keep the logic
clearly separated, and paves the way for adding ACPI support in a
similar fashion.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
[will: rename nr_irqs to avoid conflict with global variable]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:54 +01:00
Mark Rutland 3cf7ee98b8 drivers/perf: arm_pmu: move irq request/free into probe
Currently we request (and potentially free) all IRQs for a given PMU in
cpu_pmu_init(). This works for platform/DT probing today, but it doesn't
fit ACPI well as we don't have all our affinity data up-front.

In preparation for ACPI support, fold the IRQ request/free into
arm_pmu_device_probe(), which will remain specific to platform/DT
probing.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 0e2663d921 drivers/perf: arm_pmu: split cpu-local irq request/free
Currently we have functions to request/free all IRQs for a given PMU.
While this works today, this won't work for ACPI, where we don't know
the full set of IRQs up front, and need to request them separately.

To enable supporting ACPI, this patch splits out the cpu-local
request/free into new functions, allowing us to request/free individual
IRQs.

As this makes it possible/necessary to request a PPI once per cpu, an
additional check is added to detect mismatched PPIs. This shouldn't
matter for the DT / platform case, as we check this when parsing.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 3cf6111025 drivers/perf: arm_pmu: rename irq request/free functions
For historical reasons, portions of the arm_pmu code use a cpu_pmu_
prefix rather than an armpmu_ prefix. While a minor annoyance, this
hasn't been a problem thusfar.

However, to enable ACPI support, we'll need to expose a few things in
header files, and we should aim to keep those consistently namespaced.
In preparation for exporting our IRQ request/free functions, rename
these to have an armpmu_ prefix. For consistency, the 'cpu_pmu'
parameter is also renamed to 'armpmu'.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 7654137071 drivers/perf: arm_pmu: handle no platform_device
In armpmu_dispatch_irq() we look at arm_pmu::plat_device to acquire
platdata, so that we can defer to platform-specific IRQ handling,
required on some 32-bit parts. With the advent of ACPI we won't always
have a platform_device, and so we must avoid trying to dereference
fields from it.

This patch fixes up armpmu_dispatch_irq() to avoid doing so, introducing
a new armpmu_get_platdata() helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 3a5a89d30e drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs()
The ARM PMU framework code always uses armpmu_dispatch_irq as its common
IRQ handler. Passing this down from cpu_pmu_init() is somewhat
pointless, and gets in the way of refactoring.

This patch makes cpu_pmu_request_irqs() always use armpmu_dispatch_irq
as the handler when requesting IRQs, and removes the handler parameter
from its prototype.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 74a2b3ea2d drivers/perf: arm_pmu: factor out pmu registration
Currently arm_pmu_device_probe contains probing logic specific to the
platform_device infrastructure, and some logic required to safely
register the PMU with various systems.

This patch factors out the logic relating to the registration of the
PMU. This makes arm_pmu_device_probe a little easier to read, and will
make it easier to reuse the logic for an ACPI-specific probing
mechanism.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 70cd908a18 drivers/perf: arm_pmu: fold init into alloc
Given we always want to initialise common fields on an allocated PMU,
this patch folds this common initialisation into armpmu_alloc(). This
will make it simpler to reuse this code for an ACPI-specific probe path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland 083c52144a drivers/perf: arm_pmu: define armpmu_init_fn
We expect an ARM PMU's init function to have a particular prototype,
which we open-code in a few places. This is less than ideal, considering
that we cast a void value to this type in one location, and a mismatch
could easily be missed.

Add a typedef so that we can ensure this is consistent.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Mark Rutland a9e469d1c8 drivers/perf: arm_pmu: remove pointless PMU disabling
We currently disable the PMU temporarily in armpmu_add(). We may have
required this historically, but the perf core always disables an event's
PMU when calling event::pmu::add(), so this is not necessary.

We don't do similarly in armpmu_del(), or elsewhere, so this is
unnecessary and inconsistent, and only serves to confuse the reader.

Remove the pointless disable, simplifying armpmu_add() in the process.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 16:29:53 +01:00
Agustin Vega-Frias 3071f13d75 perf: qcom: Add L3 cache PMU driver
This adds a new dynamic PMU to the Perf Events framework to program
and control the L3 cache PMUs in some Qualcomm Technologies SOCs.

The driver supports a distributed cache architecture where the overall
cache for a socket is comprised of multiple slices each with its own PMU.
Access to each individual PMU is provided even though all CPUs share all
the slices. User space needs to aggregate to individual counts to provide
a global picture.

The driver exports formatting and event information to sysfs so it can
be used by the perf user space tools with the syntaxes:
   perf stat -a -e l3cache_0_0/read-miss/
   perf stat -a -e l3cache_0_0/event=0x21/

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
[will: fixed sparse issues]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-03 18:53:50 +01:00
Mark Rutland c09adab01e drivers/perf: arm_pmu: split irq request from enable
For historical reasons, we lazily request and free interrupts in the
arm pmu driver. This requires us to refcount use of the pmu (by way of
counting the active events) in order to request/free interrupts at the
correct times, which complicates the driver somewhat.

The existing logic is flawed, as it only considers currently online CPUs
when requesting, freeing, or managing the affinity of interrupts.
Intervening hotplug events can result in erroneous IRQ affinity, online
CPUs for which interrupts have not been requested, or offline CPUs whose
interrupts are still requested.

To fix this, this patch splits the requesting of interrupts from any
per-cpu management (i.e. per-cpu enable/disable, and configuration of
cpu affinity). We now request all interrupts up-front at probe time (and
never free them, since we never unregister PMUs).

The management of affinity, and per-cpu enable/disable now happens in
our cpu hotplug callback, ensuring it occurs consistently. This means
that we must now invoke the CPU hotplug callback at boot time in order
to configure IRQs, and since the callback also resets the PMU hardware,
we can remove the duplicate reset in the probe path.

This rework renders our event refcounting unnecessary, so this is
removed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: make armpmu_get_cpu_irq static]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-31 18:20:29 +01:00
Mark Rutland 7ed98e0168 drivers/perf: arm_pmu: manage interrupts per-cpu
When requesting or freeing interrupts, we use platform_get_irq() to find
relevant irqs, backing this up with additional information in an
optional irq_affinity table.

This means that our irq request and free paths are tied to a
platform_device, and our request path must jump through a number of
hoops in order to determine the required affinity of each interrupt.

Given that the affinity must be static, we can compute the affinity once
up-front at probe time, simplifying the irq request and free paths. By
recording interrupts in a per-cpu data structure, we simplify a few
paths, and permit a subsequent rework of the request and free paths.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: rename local nr_irqs variable to avoid conflict with global]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-31 18:20:02 +01:00
Mark Rutland 2681f01842 drivers/perf: arm_pmu: rework per-cpu allocation
For historical reasons, we allocate per-cpu data associated with a PMU
rather late, in cpu_pmu_init, after we've parsed whatever hardware
information we were provided with.

In order to allow use to store some per-cpu data early in the probe
path, we need to allocate (and initialise) the per-cpu data earlier.
This patch reworks the way we allocate the pmu and associated per-cpu
data in order to make that possible.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: make armpmu_{alloc,free} static
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-31 18:19:45 +01:00
Ingo Molnar e601757102 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/clock.h>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.

Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:27 +01:00
Neil Leeder 21bdbb7102 perf: add qcom l2 cache perf events driver
Adds perf events support for L2 cache PMU.

The L2 cache PMU driver is named 'l2cache_0' and can be used
with perf events to profile L2 events such as cache hits
and misses on Qualcomm Technologies processors.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
[will: minimise nesting in l2_cache_associate_cpu_with_cluster]
[will: use kstrtoul for unsigned long, remove redunant .owner setting]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-08 19:32:24 +00:00
Stephen Boyd c0bfc549e9 perf: xgene: Include module.h
I ran into a build error when I disabled CONFIG_ACPI and tried to
compile this driver:

drivers/perf/xgene_pmu.c:1242:1: warning: data definition has no type or storage class
 MODULE_DEVICE_TABLE(of, xgene_pmu_of_match);
 ^
drivers/perf/xgene_pmu.c:1242:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int]

Include module.h for the MODULE_DEVICE_TABLE macro that's
implicitly included through ACPI.

Tested-by: Tai Nguyen <ttnguyen@apm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-03 18:46:47 +00:00
Thomas Gleixner 73c1b41e63 cpu/hotplug: Cleanup state names
When the state names got added a script was used to add the extra argument
to the calls. The script basically converted the state constant to a
string, but the cleanup to convert these strings into meaningful ones did
not happen.

Replace all the useless strings with 'subsys/xxx/yyy:state' strings which
are used in all the other places already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25 10:47:44 +01:00
Tai Nguyen 9a1a1f404b perf: xgene: Remove bogus IS_ERR() check
In acpi_get_pmu_hw_inf we pass the address of a local variable to IS_ERR(),
which doesn't make sense, as the pointer must be a real, valid pointer.
This doesn't cause a functional problem, as IS_ERR() will evaluate as
false, but the check is bogus and causes static checkers to complain.

Remove the bogus check.

The bug is reported by Dan Carpenter <dan.carpenter@oracle.com> in [1]

[1] https://www.spinics.net/lists/arm-kernel/msg535957.html

Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-17 15:50:07 +01:00
Linus Torvalds 6afd563d4b ARM: SoC driver updates for v4.9
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - The Qualcomm external bus interface 2 (EBI2), used in some of their
   mobile phone chips for connecting flash memory, LCD displays or
   other peripherals
 
 - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
   EFUSE based on that firmware interface.
 
 - Perf support for the AppliedMicro X-Gene performance monitor unit
 
 - Reset driver for STMicroelectronics STM32
 
 - Reset driver for SocioNext UniPhier SoCs
 
 Aside from these, there are minor updates to SoC-specific bus,
 clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
 UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
 oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
 KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
 WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
 ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
 K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
 uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
 iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
 g1+5av0vFXg=
 =GvTq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...
2016-10-07 21:23:40 -07:00
Linus Torvalds 597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Linus Torvalds 7af8a0f808 arm64 updates for 4.9:
- Support for execute-only page permissions
 - Support for hibernate and DEBUG_PAGEALLOC
 - Support for heterogeneous systems with mismatches cache line sizes
 - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
 - arm64 PMU perf updates, including cpumasks for heterogeneous systems
 - Set UTS_MACHINE for building rpm packages
 - Yet another head.S tidy-up
 - Some cleanups and refactoring, particularly in the NUMA code
 - Lots of random, non-critical fixes across the board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJX7k31AAoJELescNyEwWM0XX0H/iOaWCfKlWOhvBsStGUCsLrK
 XryTzQT2KjdnLKf3jwP+1ateCuBR5ROurYxoDCX5/7mD63c5KiI338Vbv61a1lE1
 AAwjt1stmQVUg/j+kqnuQwB/0DYg+2C8se3D3q5Iyn7zc19cDZJEGcBHNrvLMufc
 XgHrgHgl/rzBDDlHJXleknDFge/MfhU5/Q1vJMRRb4JYrpAtmIokzCO75CYMRcCT
 ND2QbmppKtsyuFPGUTVbAFzJlP6dGKb3eruYta7/ct5d0pJQxav3u98D2yWGfjdM
 YaYq1EmX5Pol7rWumqLtk0+mA9yCFcKLLc+PrJu20Vx0UkvOq8G8Xt70sHNvZU8=
 =gdPM
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "It's a bit all over the place this time with no "killer feature" to
  speak of.  Support for mismatched cache line sizes should help people
  seeing whacky JIT failures on some SoCs, and the big.LITTLE perf
  updates have been a long time coming, but a lot of the changes here
  are cleanups.

  We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer
  workaround is acked by Russell, the DT/OF bits are acked by Rob, the
  arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and
  jump_label by Peter (all CC'd).

  Summary:

   - Support for execute-only page permissions
   - Support for hibernate and DEBUG_PAGEALLOC
   - Support for heterogeneous systems with mismatches cache line sizes
   - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
   - arm64 PMU perf updates, including cpumasks for heterogeneous systems
   - Set UTS_MACHINE for building rpm packages
   - Yet another head.S tidy-up
   - Some cleanups and refactoring, particularly in the NUMA code
   - Lots of random, non-critical fixes across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits)
  arm64: tlbflush.h: add __tlbi() macro
  arm64: Kconfig: remove SMP dependence for NUMA
  arm64: Kconfig: select OF/ACPI_NUMA under NUMA config
  arm64: fix dump_backtrace/unwind_frame with NULL tsk
  arm/arm64: arch_timer: Use archdata to indicate vdso suitability
  arm64: arch_timer: Work around QorIQ Erratum A-008585
  arm64: arch_timer: Add device tree binding for A-008585 erratum
  arm64: Correctly bounds check virt_addr_valid
  arm64: migrate exception table users off module.h and onto extable.h
  arm64: pmu: Hoist pmu platform device name
  arm64: pmu: Probe default hw/cache counters
  arm64: pmu: add fallback probe table
  MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry
  arm64: Improve kprobes test for atomic sequence
  arm64/kvm: use alternative auto-nop
  arm64: use alternative auto-nop
  arm64: alternative: add auto-nop infrastructure
  arm64: lse: convert lse alternatives NOP padding to use __nops
  arm64: barriers: introduce nops and __nops macros for NOP sequences
  arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s
  ...
2016-10-03 08:58:35 -07:00
Arnd Bergmann c55b2d989a X-Gene driver changes queued for v4.9
This patch set includes:
 + X-Gene SoC Performance Monitoring Unit (PMU) driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX24bQAAoJEB11UG/BVQ/gMZEP/3408fNJfE0LiUdcT+pq/4Iq
 udqJwGXAp3yIKUy1Ewl82N9HlyhWI5AFD7lsLbyeKghPDB33atva4h+ywg4h9bDK
 /Iug+E635JLj64w54qLCcenTCzKQQGVMcHNO7QZsKhHyvJbjKjFT1ZhlQiON8DxU
 uovSRergt8MVNwKbPaoE8kWsKIP/WEJWnxu9F4diWo0/W7a3rEta2urqvB2xwaot
 ZaPfm9/DY2rew6rXiUpAEyFCq72zOTHFzMLsU5HRafdANcdYBbF6XwflyaNqgysK
 KcXMNEDtCq6MQYj+B5fcKUrOY0TQLdajNQg/yaOqHwWlIdpFSFzU3ROGgLffPHiX
 t0b6w0dZJOQ2oZ6MwZNLqLDFloSn7uIovDrSQYrWn5AXcB+IU692AoBX2vKCUp95
 0P8EUuISrdgcX1IHGbHySK/zP0Y2s3skXn3+RHbNBvuTCljpa6Qo/5iytrIDW1N7
 8FjtqmqiIVUFrEjZwOxNj5LQMB3B5kQm7EBKtDN+ML3cKE1Bn/RTS8+wpDqoo0Xg
 NVNMSo7BIKDlkJStG1DWy2FlLReO1O1p1DbanSQsWywC9j357W5VuU8X+NjRgBHR
 NJBvpZpJewbOKItnoK4SQa2YrwOrSSPy1JlTWBQICnRvgHH17WXmtkhkjSfWAIFD
 e4ctgF/vMDaH26oKcW6z
 =OqRW
 -----END PGP SIGNATURE-----

Merge tag 'xgene-drivers-for-4.9' of https://github.com/AppliedMicro/xgene-next into next/drivers

Pull "X-Gene driver changes queued for v4.9" from Duc Dang:

This patch set includes:
+ X-Gene SoC Performance Monitoring Unit (PMU) driver

* tag 'xgene-drivers-for-4.9' of https://github.com/AppliedMicro/xgene-next:
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
2016-09-19 17:05:14 +02:00
Mark Salter dbee3a74ef arm64: pmu: add fallback probe table
In preparation for ACPI support, add a pmu_probe_info table to
the arm_pmu_device_probe() call. This table gets used when
probing in the absence of a devicetree node for PMU.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-16 17:11:33 +01:00
Tai Nguyen 832c927d11 perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
This patch adds a driver for the SoC-wide (AKA uncore) PMU hardware
found in APM X-Gene SoCs.

Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
2016-09-15 11:20:55 -07:00
Mark Rutland 48538b5863 drivers/perf: arm_pmu: expose a cpumask in sysfs
In systems with heterogeneous CPUs, there are multiple logical CPU PMUs,
each of which covers a subset of CPUs in the system. In some cases
userspace needs to know which CPUs a given logical PMU covers, so we'd
like to expose a cpumask under sysfs, similar to what is done for uncore
PMUs.

Unfortunately, prior to commit 00e727bb38 ("perf stat: Balance
opening and reading events"), perf stat only correctly handled a cpumask
holding a single CPU, and only when profiling in system-wide mode. In
other cases, the presence of a cpumask file could cause perf stat to
behave erratically.

Thus, exposing a cpumask file would break older perf binaries in cases
where they would otherwise work.

To avoid this issue while still providing userspace with the information
it needs, this patch exposes a differently-named file (cpus) under
sysfs. New tools can look for this and operate correctly, while older
tools will not be adversely affected by its presence.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:51:51 +01:00
Mark Rutland 1589680da6 drivers/perf: arm_pmu: only use common attr_groups
Now that the 32-bit and 64-bit perf backends use the common groups
directly, remove the fallback and no longer allow the groups array to be
overridden.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:51:51 +01:00
Mark Rutland 86cdd72af9 drivers/perf: arm_pmu: add common attr group fields
In preparation for adding common attribute groups, add an array of
attribute group pointers to arm_pmu, which will be used if the
backend hasn't already set pmu::attr_groups.

Subsequent patches will move backends over to using these, before adding
common fields.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09 14:51:51 +01:00
Marc Zyngier 282b879635 drivers/perf: arm_pmu: Always consider IRQ0 as an error
As declared by the chief penguin, and enforced by the NO_IRQ brigade,
IRQ0 doesn't exist, and is considered as an error (no irq).

Unfortunately, the arm_pmu driver still considers it as valid in
a large number of cases. Let's fix this.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-06 18:26:33 +01:00
Sebastian Andrzej Siewior 6e103c0cfe arm/perf: Use multi instance instead of custom list
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160817171420.sdwk2qivxunzryz4@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-02 20:05:06 +02:00
Stefan Wahren 63fb0a9516 drivers/perf: arm_pmu: Fix NULL pointer dereference during probe
Patch 7f1d642fbb ("drivers/perf: arm-pmu: Fix handling of SPI lacking
interrupt-affinity property") unintended also fixes perf_event support
for bcm2835 which doesn't have PMU interrupts. Unfortunately this change
introduce a NULL pointer dereference on bcm2835, because irq_is_percpu
always expected to be called with a valid IRQ. So fix this regression
by validating the IRQ before.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 7f1d642fbb ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02 17:17:52 +01:00
Stefan Wahren 753246840d drivers/perf: arm_pmu: Fix leak in error path
In case of a IRQ type mismatch in of_pmu_irq_cfg() the
device node for interrupt affinity isn't freed. So fix this
issue by calling of_node_put().

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: fa8ad7889d ("arm: perf: factor arm_pmu core out to drivers")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02 17:17:52 +01:00
Marc Zyngier 7f1d642fbb drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property
Patch 19a469a587 ("drivers/perf: arm-pmu: Handle per-interrupt
affinity mask") added support for partitionned PPI setups, but
inadvertently broke setups using SPIs without the "interrupt-affinity"
property (which is the case for UP platforms).

This patch restore the broken functionnality by testing whether the
interrupt is percpu or not instead of relying on the using_spi flag
that really means "SPI *and* interrupt-affinity property".

Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 19a469a587 ("drivers/perf: arm-pmu: Handle per-interrupt affinity mask")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-09 17:57:39 +01:00
Sudeep Holla a026bb12cc drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock
arm_pmu_mutex is never held long and we don't want to sleep while the
lock is being held as it's executed in the context of hotplug notifiers.
So it can be converted to a simple spinlock instead.

Without this patch we get the following warning:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/2
no locks held by swapper/2/0.
irq event stamp: 381314
hardirqs last  enabled at (381313): _raw_spin_unlock_irqrestore+0x7c/0x88
hardirqs last disabled at (381314): cpu_die+0x28/0x48
softirqs last  enabled at (381294): _local_bh_enable+0x28/0x50
softirqs last disabled at (381293): irq_enter+0x58/0x78
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.7.0 #12
Call trace:
 dump_backtrace+0x0/0x220
 show_stack+0x24/0x30
 dump_stack+0xb4/0xf0
 ___might_sleep+0x1d8/0x1f0
 __might_sleep+0x5c/0x98
 mutex_lock_nested+0x54/0x400
 arm_perf_starting_cpu+0x34/0xb0
 cpuhp_invoke_callback+0x88/0x3d8
 notify_cpu_starting+0x78/0x98
 secondary_start_kernel+0x108/0x1a8

This patch converts the mutex to spinlock to eliminate the above
warnings. This constraints pmu->reset to be non-blocking call which is
the case with all the ARM PMU backends.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Fixes: 37b502f121 ("arm/perf: Fix hotplug state machine conversion")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-09 17:33:38 +01:00
Linus Torvalds a6408f6cb6 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp hotplug updates from Thomas Gleixner:
 "This is the next part of the hotplug rework.

   - Convert all notifiers with a priority assigned

   - Convert all CPU_STARTING/DYING notifiers

     The final removal of the STARTING/DYING infrastructure will happen
     when the merge window closes.

  Another 700 hundred line of unpenetrable maze gone :)"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  timers/core: Correct callback order during CPU hot plug
  leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
  powerpc/numa: Convert to hotplug state machine
  arm/perf: Fix hotplug state machine conversion
  irqchip/armada: Avoid unused function warnings
  ARC/time: Convert to hotplug state machine
  clocksource/atlas7: Convert to hotplug state machine
  clocksource/armada-370-xp: Convert to hotplug state machine
  clocksource/exynos_mct: Convert to hotplug state machine
  clocksource/arm_global_timer: Convert to hotplug state machine
  rcu: Convert rcutree to hotplug state machine
  KVM/arm/arm64/vgic-new: Convert to hotplug state machine
  smp/cfd: Convert core to hotplug state machine
  x86/x2apic: Convert to CPU hotplug state machine
  profile: Convert to hotplug state machine
  timers/core: Convert to hotplug state machine
  hrtimer: Convert to hotplug state machine
  x86/tboot: Convert to hotplug state machine
  arm64/armv8 deprecated: Convert to hotplug state machine
  hwtracing/coresight-etm4x: Convert to hotplug state machine
  ...
2016-07-29 13:55:30 -07:00
Sebastian Andrzej Siewior 37b502f121 arm/perf: Fix hotplug state machine conversion
Mark Rutland pointed out that this commit is incomplete:

  7d88eb695a ("arm/perf: Convert to hotplug state machine")

The problem is that:

 > We may have multiple PMUs (e.g. two in big.LITTLE systems), and
 > __oprofile_cpu_pmu only contains one of these. So this conversion is not
 > correct.
 >
 > We were relying on the notifier list implicitly containing a list of
 > those PMUs. It seems like we need an explicit list here.
 >
 > We keep __oprofile_cpu_pmu around for legacy 32-bit users of OProfile
 > (on non-hetereogeneous systems), and that's all that the variable should
 > be used for.

Introduce arm_pmu_list to correctly handle multiple PMUs in the system.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-tip-commits@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160719111733.GA22911@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-20 09:57:34 +02:00
Thomas Gleixner 7d88eb695a arm/perf: Convert to hotplug state machine
Straight forward conversion w/o bells and whistles.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153335.794097159@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 10:40:23 +02:00
Marc Zyngier 19a469a587 drivers/perf: arm-pmu: Handle per-interrupt affinity mask
On a big-little system, PMUs can be wired to CPUs using per CPU
interrups (PPI). In this case, it is important to make sure that
the enable/disable do happen on the right set of CPUs.

So instead of relying on the interrupt-affinity property, we can
use the actual percpu affinity that DT exposes as part of the
interrupt specifier. The DT binding is also updated to reflect
the fact that the interrupt-affinity property shouldn't be used
in that case.

Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-08 17:39:55 +01:00
Mark Salter f7a6c1492a arm: pmu: Fix non-devicetree probing
There is a problem in the non-devicetree PMU probing where some
probe functions may get the number of supported events through
smp_call_function_any() using the arm_pmu supported_cpus mask.
But at the time the probe function is called, the supported_cpus
mask is empty so the call fails. This patch makes sure the mask
is set before calling the init function rather than after.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-15 09:51:35 +01:00
Julien Grall 5988a363ed drivers/perf: arm_pmu: Avoid leaking pmu->irq_affinity on error
pmu->irq_affinity will not be freed if an error occurred within
arm_pmu_device_probe after of_pmu_irq_cfg has been called.

Note that in the case of_pmu_irq_cfg is returning an error,
pmu->irq_affinity will not be set, but it should be NULL as pmu was
kzalloc'd. Therefore the result kfree(NULL) is benign.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-03 10:16:21 +01:00