Граф коммитов

1390 Коммитов

Автор SHA1 Сообщение Дата
Linus Walleij 3244aae575 ARM: multi_v7: add HREFv60 to multi_v7 defconfig
This is just a standard board for the Ux500, include it in the
v7 multiplatform defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18 12:16:08 -07:00
Olof Johansson a0396b9bd5 ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT
Without this, legacy platforms that can boot with a multiplatform
kernel but that need the DTB to be appended, won't have a way to pass
firmware-set bootargs to the kernel.

This is needed to boot multi_v7_defconfig on snowball, for instance.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-17 09:08:14 -07:00
Linus Torvalds 6404141718 ARM: SoC late changes for v3.12
These are changes that arrived a little late before the merge window,
 or had dependencies on previous branches.
 
 Highlights:
 - ux500: misc. cleanup, fixup I2C devices
 - exynos: DT updates for RTC; PM updates
 - at91: DT updates for NAND; new platforms added to generic defconfig
 - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks
 - highbank: LPAE fixes, select necessary ARM errata
 - omap: PM fixes and improvements; OMAP5 mailbox support
 - omap: basic support for new DRA7xx SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLkf1AAoJEFk3GJrT+8ZlF7oP/AyxrdRFyC1YmuOqzFH0/JTQ
 EVBmMBiH+f1IKBT6YRkWCzX4JI5oOi+2DhrM6d/UPfbpr6pwd8dptuPiyLuBBUEm
 byNbiJEYHidm23oFpKM+89tTHXbBrrz8XQN2xLwYhNr24QkVAsLTxyOjVA7KJM59
 tk1tPQzO1ORyiFd485eQa3V4z98JgcE3QFNthbS7Y72wEXBzMZQDc9nFaoIJ5mHW
 nzJSZyV24ibeEJeM2nsc7a3OvCyUfAQaO5Cio2UvdkGzZcmtxjxc1LjHa4VjIL6h
 hwz+gqIOfl3hXotbjJxTp9+Ezt4TGU5bB3NUweE1btHE/KIEu0bx4hSsOz/kooA9
 2JL8BCCTx+KiGiNHmNCcT679n9q11iOwqOWvxxhcJFkiV/6+mkjwTD9TNwR1q+RG
 +LtOZr9tMcu2v/DbAivDYKiROmNCZhxpn35DoUKpBy73SOvJOiTLtSYitVN/tyM3
 nWLEP5aTf3NwrWr8nFFws6ycwhgTCX0ITbdFD/fMlLMamHYPkckJ/0NXXOxfGiLk
 kCMbdrCX4YTbCftmAQhrbdaPJVnE/SZI3CTJfutj8eX6NC2fm/U7Hcf5PI+W0Igd
 moN/PaUULpVZI5hUrADyU1HCQnA97pv0biYVwzW5pBIt2u9tzUritabuERxPt9fa
 SdHj0+u+xq9d3y35Oq46
 =NIZZ
 -----END PGP SIGNATURE-----

Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Kevin Hilman:
 "These are changes that arrived a little late before the merge window,
  or had dependencies on previous branches.

  Highlights:
   - ux500: misc.  cleanup, fixup I2C devices
   - exynos: DT updates for RTC; PM updates
   - at91: DT updates for NAND; new platforms added to generic defconfig
   - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks
   - highbank: LPAE fixes, select necessary ARM errata
   - omap: PM fixes and improvements; OMAP5 mailbox support
   - omap: basic support for new DRA7xx SoCs"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: dts: vexpress: Add CCI node to TC2 device-tree
  ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
  ARM: EXYNOS: always enable PM domains support for EXYNOS4X12
  ARM: highbank: clean-up some unused includes
  ARM: sun7i: Enable the A20 clocks in the DTSI
  ARM: sun6i: Enable clock support in the DTSI
  ARM: sun5i: dt: Use the A10s gates in the DTSI
  ARM: at91: at91_dt_defconfig: enable rm9200 support
  ARM: dts: add ADC device tree node for exynos5420/5250
  ARM: dts: Add RTC DT node to Exynos5420 SoC
  ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC
  ARM: dts: Fix the RTC DT node name for Exynos5250
  irqchip: mmp: avoid to include irqs head file
  ARM: mmp: avoid to include head file in mach-mmp
  irqchip: mmp: support irqchip
  irqchip: move mmp irq driver
  ARM: OMAP: AM33xx: clock: Add RNG clock data
  ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
  ARM: OMAP4: clock: Lock PLLs in the right sequence
  ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS
  ...
2013-09-09 16:35:29 -07:00
Linus Torvalds fa91515cbf ARM: Renesas SoC cleanup, refactoring and more SMP support
Lots of cleanup and refactoring and some SMP additions for Renesas
 platforms.  Due to some inter-dependencies with other arm-soc
 branches, this Renesas stuff was separated out for sending after the
 other branches were merged.
 
 Highlights:
 - remove unused board support and cleanup of unused headers
 - refactoring of init and device registration
 - simplify IRQ initialization
 
 Conflicts: Too many. Most of these are because Simon chose to send
 some board updates through the V4L tree that ends up colliding with
 the main platform changes. We'll work with him on sorting out his
 workflow:
 
 - arch/arm/boot/dts/r8a7740.dtsi:
   - Add/add conflict in a devicetree file (keep both)
 
 - arch/arm/mach-shmobile/Makefile:
   - Splitting out of clock files collides with intc move to DT.
     Keep HEAD version but remove intc-* files for R8A7740 and R8A7779.
 
 - arch/arm/mach-shmobile/board-bockw.c:
   - Keep HEAD but remove i2c, hspi and mmc device init calls
 
 - arch/arm/mach-shmobile/board-marzen.c
   - Remove mach/hardware.h include and r8a7779_add_usb_phy_device() call,
     everything else stays.
 
 - arch/arm/mach-shmobile/include/mach/r8a7778.h:
   - From HEAD, Keep camera-rcar.h include and r8a7778_add_vin_device()
   - From branch, keep everything
 
 - arch/arm/mach-shmobile/include/mach/r8a7779.h:
   - From HEAD, Keep only camera-rcar.h include and r8a7779_add_vin_device()
 
 - arch/arm/mach-shmobile/setup-r8a7778.c
   - Keep HEAD, but drop the MMC section (struct resource + add_mmc_device())
   - take the new function name from our side (r8a7778_add_dt_devices())
 
 - arch/arm/mach-shmobile/setup-r8a7779.c
   - Keep HEAD, but drop r8a7779_add_usb_phy_device()
 
 I've also pushed a test-merge2 branch where you can see how I resolved
 them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLkaWAAoJEFk3GJrT+8Zl5l8P/3oJ83VJHcjD2fMpAb8Dz5b6
 pdRLxFLJrLxN+WTC1LylPom3EsSAJuuaG3Z8Cr9Xa6yoWuUYLy/A6MwsyLXBOGLC
 3tVWa96xt1cHhd3p/NAOQwvRz/CFdMLM7MStd0mgSihj/pq3jtc2V697+dRtmJih
 J0mIc8+jnig+uwVl1DMCmBqdEmasccaDZeX30PcjaPL9ZDyZBeSXI8brdDx8A21e
 5RiAsqn9HCxrLZjedL9TWA23BJ7NccsI3aVGpQVtCa9N/MHKp8gZft3v8FrWzFjk
 cOeaZY55Xq8hbbbmkF1LoezLrlQDF5aJcj6tl85lyuSJfR5d5BXmLswI7bglw8Qy
 ZU7/aF28pbhUT3oozNuRx5yl8oqpxmUoCwfP5hfnFf590OJ3noIELbOoIZQkJQUy
 LsCf3GMUQaWzrvs0IenM1lMJmw5zfDXbrUWUti95OAd5bbTdBE30z7EouejoKRVh
 1/Wg4keBdtem4CpU+C4fUVtLL4XJhe/uadbjKteA7DRpTRMvrLYNutQgyOAuQjRM
 RiLvDPnsIZEGV+YMsj+IemN0hanae4kR3v8At+HwvVK1hROWEQWyL6cGxXH9n9jB
 VToxoYoyiAOk01X2BnPVMVTXEl5XMAVgZ1IgZNhnhaIUxi3HKrUfNG4oXE5Jx8Lw
 XruUAUKHknTUJ2Q/3y4D
 =Fagt
 -----END PGP SIGNATURE-----

Merge tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman:
 "Lots of cleanup and refactoring and some SMP additions for Renesas
  platforms.  Due to some inter-dependencies with other arm-soc
  branches, this Renesas stuff was separated out for sending after the
  other branches were merged.

  Highlights:
   - remove unused board support and cleanup of unused headers
   - refactoring of init and device registration
   - simplify IRQ initialization"

* tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs
  ARM: shmobile: Introduce per-CPU SMP boot / sleep code
  ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779
  ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0
  ARM: shmobile: Add shared SCU CPU Hotplug code
  ARM: shmobile: Use shared SCU SMP boot code on emev2
  ARM: shmobile: Use shared SCU SMP boot code on r8a7779
  ARM: shmobile: Use shared SCU SMP boot code on sh73a0
  ARM: shmobile: Introduce shared SCU SMP boot code
  ARM: shmobile: sh73a0: Remove global GPIO_NR definition
  ARM: shmobile: kzm9d: remove nfsroot settings from bootargs
  ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs
  ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup
  ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup
  ARM: shmobile: bockw: add missing __initdata
  ARM: shmobile: r8a7790: add missing __initdata
  ARM: shmobile: r8a7779: add missing __initdata
  ARM: shmobile: Remove unused shmobile_init_time()
  ARM: shmobile: Use clocksource_of_init() on r8a7790
  ARM: shmobile: Use default ->init_time() on KZM9G DT ref
  ...
2013-09-09 16:33:57 -07:00
Linus Torvalds 44598f98b9 ARM: SoC board updates for 3.12
Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches,
 but most of this is around legacy code and board support. We've found that
 platform maintainers have a hard time separating all of these out and might
 move towards fewer branches for next release.
 
 - Removal of a number of Marvell Kirkwood board files, since contents
   is now common and mostly configured via DT.
 - Device-tree updates for Marvell Dove, including irqchip and clocksource
   setup.
 - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager.
 - New backlight drivers for backlights used on Renesas shmobile platforms.
 - Removal of Renesas leds driver.
 - Shuffling of some of the new Broadcom platforms to give room for others in
   the same mach directory. More in 2.13.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhrfAAoJEIwa5zzehBx3OOAQAJCWhoYaHvWmyAf+xCOQNpX2
 YgAngENW04VpHFOyn6BtoGv6+5JypdB2TmK3GHHlVJd1Im5mD1wgm8hAfgyV8lQ4
 UeJULdA2HZAstKeTirO65BIyUb5QIrWakF24ccfIfg2xeScM8FV0m8cmzeo3fYAf
 DmmeoSCmvTdu/cDWBNlsQZ/as8qCQwyF+5kZg+SMl1btA1Publu2I5lDE02TH46d
 sc5mN+ihw0JG62EJV7pov6uVyeFLExoTbrNfQZ4rixmKkMDS/jq5ZbBS5c0i8ULF
 s1UMSZtYTcUO9rAPv3+MOIc7fq7nKo9lLuwMrA1HHUEDJ2BEi8DIp99F+ZYm/MSL
 WpVxYNwOobPcMJBYGR2fy4GgpIyWB285GgrBUxcq7t0Xi4uBbptwjLhDE4d7LREV
 8guW251R+OEVPYcwFctsubnox0MViyC3CQ1FaAAdtTjpSKomlhk/yaxaQ9nGrxls
 QCZgXHWm4Ir3QYv8XfOn0X9vdP81EnX11SiwtrRSJ71QMs814nB8NdPDqU4VHsw8
 exKmqjq/Lt+F9Kpxn/FevNNuYOdefZNQi00yl3ERchdIGdvRwE/0yA0D69mpwIVr
 E41UwvH3g43vazCo2PMdWPWuFlpGMR3iZ4pXnDLH/w33ppfJWfokYwKSRQ/mu/MN
 LMjkwoZn1X+fZzNSh9/G
 =EGua
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...
2013-09-06 13:34:43 -07:00
Linus Torvalds b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Linus Torvalds 8e73e367f7 ARM: SoC cleanups for 3.12
This branch contains code cleanups, moves and removals for 3.12.
 
 There's a large number of various cleanups, and a nice net removal of
 13500 lines of code.
 
 Highlights worth mentioning are:
 
 - A series of patches from Stephen Boyd removing the ARM local timer API.
 - Move of Qualcomm MSM IOMMU code to drivers/iommu.
 - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver
   and switching over to the drivers/pwm one.
 - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM).
 
 There's also a move of a header file out of include/linux/i2c/ to
 platform_data, where it really belongs. It touches mostly ARM platform
 code for include changes so we took it through our tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKg/NAAoJEIwa5zzehBx3vxIP/19ouV4WrzOeEMz2Id8bYT5/
 Tu9HRm+PJJ2O+4P+DYlycRAEHsbuDbwgdcqToH3quca1YnIcoJgY0FA6D0ihQ5uE
 EvTgFIpkNMLnR43GYDOE3a/rR3hYPg5oQabKFn7ZGLG2ND3D3d2N05WT8XNbTYDk
 nvCXvyRRT1ynCEzbxRBiE8x62ao4bqa5dZ1zrHHIEoakqciXEng8IU0nxx7SUarv
 61GBJHVoGFpwOWXdgt2uxyXFbn6nMrhf33ynB+RRAZhqlrC8FROj8Iz+3EoKSAHc
 fMJSw6jgdjMCfTDvi0j/eemoNC4fm0eP17Dz9WcwxtIrJPNFVrxZq+biDnpb49nM
 IHsbNrILosw9AbHr3C0kTU9tp+Jie2cE1RWHqTIN3S3zb4qN+fIJiU6o6LMhsNP5
 +ZxL4M5IYmvZYbU3a+A00TPwVRqBbsZB+et9RtYZsdpepovDiN4XcixEoT7ffqrt
 VLjJyoX7Aqmds46lMdsdD3bpPkREmMdf8aMm5fvdIqwbJi1pFMMGMdTgN2WLG5aM
 r0bj/DizxL7Brs8RHwOScUgXteZs3gg87v5Ns/3zAyJZvE4norPAiT+EJeXylpRO
 LDqqaypFs75nU+mWLNo8Fzck4Xue55SBqx5Bo3aD/Smk8B6r4KMqnMKVsV5RFHAU
 XfWb49HulUwHHdn5DAPx
 =1vE4
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This branch contains code cleanups, moves and removals for 3.12.

  There's a large number of various cleanups, and a nice net removal of
  13500 lines of code.

  Highlights worth mentioning are:

   - A series of patches from Stephen Boyd removing the ARM local timer
     API.
   - Move of Qualcomm MSM IOMMU code to drivers/iommu.
   - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM
     driver and switching over to the drivers/pwm one.
   - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM).

  There's also a move of a header file out of include/linux/i2c/ to
  platform_data, where it really belongs.  It touches mostly ARM
  platform code for include changes so we took it through our tree"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
  gpio: (gpio-pca953x) move header to linux/platform_data/
  arm: zynq: hotplug: Remove unreachable code
  ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*()
  tegra: simplify use of devm_ioremap_resource
  ARM: SAMSUNG: Remove plat/regs-timer.h header
  ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
  ARM: SAMSUNG: Remove pwm-clock infrastructure
  ARM: SAMSUNG: Remove old PWM timer platform devices
  pwm: Remove superseded pwm-samsung-legacy driver
  ARM: SAMSUNG: Modify board files to use new PWM platform device
  ARM: SAMSUNG: Rework private data handling in dev-backlight
  pwm: Add new pwm-samsung driver
  ARM: mach-mvebu: remove redundant DT parsing and validation
  ARM: msm: Only compile io.c on platforms that use it
  iommu/msm: Move mach includes to iommu directory
  ARM: msm: Remove devices-iommu.c
  ARM: msm: Move mach/board.h contents to common.h
  ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE
  ARM: msm: Remove TMR and TMR0 static mappings
  ...
2013-09-06 13:21:16 -07:00
Linus Torvalds 27c053aa8d Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "This series contains:
   - Exynos s5p-mfc driver got support for VP8 encoder
   - Some SoC drivers gained support for asynchronous registration
     (needed for DT)
   - The RC subsystem gained support for RC activity LED;
   - New drivers added: a video decoder(adv7842), a video encoder
     (adv7511), a new GSPCA driver (stk1135) and support for Renesas
     R-Car (vsp1)
   - the first SDR kernel driver: mirics msi3101.  Due to some troubles
     with the driver, and because the API is still under discussion, it
     will be merged at staging for 3.12.  Need to rework on it
   - usual new boards additions, fixes, cleanups and driver
     improvements"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits)
  [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0
  [media] exynos4-is: Fix entity unregistration on error path
  [media] exynos-gsc: Register v4l2 device
  [media] exynos4-is: Fix fimc-lite bayer formats
  [media] em28xx: fix assignment of the eeprom data
  [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
  [media] usbtv: Throw corrupted frames away
  [media] usbtv: Fix deinterlacing
  [media] v4l2: added missing mutex.h include to v4l2-ctrls.h
  [media] DocBook: upgrade media_api DocBook version to 4.2
  [media] ml86v7667: fix compile warning: 'ret' set but not used
  [media] s5p-g2d: Fix registration failure
  [media] media: coda: Fix DT driver data pointer for i.MX27
  [media] s5p-mfc: Fix input/output format reporting
  [media] v4l: vsp1: Fix mutex double lock at streamon time
  [media] v4l: vsp1: Add support for RT clock
  [media] v4l: vsp1: Initialize media device bus_info field
  [media] davinci: vpif_capture: fix error return code in vpif_probe()
  [media] davinci: vpif_display: fix error return code in vpif_probe()
  [media] MAINTAINERS: add entries for adv7511 and adv7842
  ...
2013-09-05 11:55:59 -07:00
Linus Torvalds eced5a0a5a OMAP specific fbdev changes for 3.12:
* Change the OMAP board files to use the new OMAP display drivers
 * Remove all the old drivers, and the related auxiliary code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKCBzAAoJEPo9qoy8lh71yy4QAIONKG1wqN93oGqhWlcSHWIe
 Lg9YIqYk7FDfroTVunGtm0nImJmJ9yEVkxAXBRJbVb5gwvlWhpUIrhc6OahksXP8
 rVxuwb+U9LdwWkskamv0UsstvIMMSPgtsuvAKeBaBz9jm0Yu+TbrZvnCv0AyKlKE
 IscOlDycG9ENbUrhIzu9utPNlvE03hqqgn8RVYvjoj4hQ8BmOBSOGGfuofbITJAS
 8wY4nAoRwU+rV3dWQgNAvFyQ/dvsnZ4nYNLJhnf6eaB9HzpfdtFUrOF/rAlJU8nG
 RrMt5oykQT9a6VKxNryoFqih2q+FPrXBARVDvGWxn6w+q2RHrw5eteGcemegzTga
 OSGyhLpGbT/5cvbQtfaHX/Rcrdy9CNj1FMy6Y/xMvkHeqiy+0Eo6l+Nh70cvHzrx
 b+vonkSornngymt6QSXyQwXkP1PbO9ZEsZbeK+wjrqrRKL5KRvQ/HGz3uYv7CiMX
 A6Q51RHDCDoelVAn9JORIEDQukh3R78XNwPbrjdRB1pNE3Z51rmSpolKsQbmPF9m
 073p4wQ91qOji4eIdxPhuN7NuAexs42iAIZNQnZ2gMFWWSwHLlNinaY2Uu+Fs2it
 wLyKabqvi1AeFHcARzYDuHzVPrRb+6exHokud6998M9zEvFAGCoKFcsxoEvvL5/u
 gwRjFHmMzz4caPVct0UU
 =Hj7U
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull OMAP specific fbdev changes from Tomi Valkeinen:
 "I've got this pull request separate from the main fbdev pull request,
  as this contains a bunch of OMAP board file changes and thus could
  possibly be rejected in case of bad conflicts.

  The removal of the old display drivers depend on the board file
  changes, so Tony Lindgren suggested taking them together via fbdev
  tree.  These are in linux-next, and also Tony didn't see any conflicts
  with any of the branches he had, so they should go in clean.

   - Change the OMAP board files to use the new OMAP display drivers

   - Remove all the old drivers, and the related auxiliary code"

* tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: rename omap_dss_device's 'device' field to 'dst'
  OMAPDSS: rename omap_dss_device's 'output' to 'src'
  OMAPDSS: DSS: remove legacy dss bus support
  OMAPDSS: RFBI: remove code related to old panel model
  OMAPDSS: VENC: remove code related to old panel model
  OMAPDSS: SDI: remove code related to old panel model
  OMAPDSS: DSI: remove code related to old panel model
  OMAPDSS: HDMI: remove code related to old panel model
  OMAPDSS: DPI: remove code related to old panel model
  OMAPDSS: remove all old panel drivers
  OMAPDSS: DPI: change regulator handling
  OMAPDSS: SDI: change regulator handling
  OMAPDSS: fix DPI and SDI device ids
  OMAPDSS: remove omap_dss_device->channel field
  OMAPDSS: RFBI: Mark RFBI as broken
  ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig
  ARM: OMAP: AM3517EVM: use new display drivers
  ARM: OMAP: Zoom: use new display drivers
  ARM: OMAP: Pandora: use new display drivers
  ARM: OMAP: OMAP3EVM: use new display drivers
  ...
2013-09-05 09:44:03 -07:00
Linus Torvalds ae7a835cc5 Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Gleb Natapov:
 "The highlights of the release are nested EPT and pv-ticketlocks
  support (hypervisor part, guest part, which is most of the code, goes
  through tip tree).  Apart of that there are many fixes for all arches"

Fix up semantic conflicts as discussed in the pull request thread..

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits)
  ARM: KVM: Add newlines to panic strings
  ARM: KVM: Work around older compiler bug
  ARM: KVM: Simplify tracepoint text
  ARM: KVM: Fix kvm_set_pte assignment
  ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256
  ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs
  ARM: KVM: vgic: fix GICD_ICFGRn access
  ARM: KVM: vgic: simplify vgic_get_target_reg
  KVM: MMU: remove unused parameter
  KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate()
  KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls
  KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX
  KVM: x86: update masterclock when kvmclock_offset is calculated (v2)
  KVM: PPC: Book3S: Fix compile error in XICS emulation
  KVM: PPC: Book3S PR: return appropriate error when allocation fails
  arch: powerpc: kvm: add signed type cast for comparation
  KVM: x86: add comments where MMIO does not return to the emulator
  KVM: vmx: count exits to userspace during invalid guest emulation
  KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp
  kvm: optimize away THP checks in kvm_is_mmio_pfn()
  ...
2013-09-04 18:15:06 -07:00
Olof Johansson d296ebe0e6 Add basic support for devices on dra7xx by adding the PRCM and hwmod
parts the same way as for other omaps. This is still needed in
 addition to device tree support for things like power management.
 
 Via Paul Walmsley <paul@pwsan.com>:
 
 This series adds basic TI DRA7xx PRCM and hwmod support.
 
 Basic test logs are available here:
 
 http://www.pwsan.com/omap/testlogs/dra7xx_prcm_devel_v3.12/20130823050445/
 
 Note that DRA7xx could not be tested locally, since I don't have a board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSGysnAAoJEBvUPslcq6VzP00QALzGla3/ZMwnE3RpIkU8f9Ju
 dQkgtV/71yM7RZE6AxW1BgrFV3EcIEn2aPTWTAPXih7mtQJ30BlshDPu0JKSPQp4
 jkbr/T7euMkmJ2g3nACTPLvcjdEwsBQXYfDb+qRHX6HV80Yg0qdXtLhfn4lEGFPw
 A+MYlFGli3aQYlnRFIDtSSBecOfLPQ94VYZtk2modz1k6aXMD6qrORLuu4jvuICS
 bcRnJAgjxYez7vvnJ0h+1uQsgni4lUqrUzjuNqMEmZRFyIjilt2kP9gRpSdKLu2p
 nwPSOLVpMy6D/LWJrhhRRVkyoOwAQk6T0nfmKkk+IEZTbeu3AYfo8yX35/O8Ziw7
 BA1P4G66A5Y2q/pWtfZB2XO1ifD5cmPHrI/Vzq3rVq6yEoWI3vCjiDnRYsxU2J6M
 lkXCQtXnCI/xdALSeDJ14m0d/IefANf0iS/DJp/+iHwGRgH1twas32Sk9V1ub4i6
 Oh2XUIoydZpv6eeJzQSTBxNYSDO0alN7hHBQKkwqOpi7sSCLg4kZW8GgF2Vm5YC4
 bQbH636o8Vd+E0yP2U0F9gZoNN7J1xFdzomU8sEyYLXBBXlzvIbrXH8t1qcK0Gg7
 4xE3hfoLuieiaX4uvgeW3yEvGaFkuK8MmnMdKxzZnKGhEtBj33+gGLaLJohhg0st
 AO4khUsBuZNmqcnKOCui
 =c+8k
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.12/dra7xx-prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/all

From Tony Lindgren:
Add basic support for devices on dra7xx by adding the PRCM and hwmod
parts the same way as for other omaps. This is still needed in
addition to device tree support for things like power management.

Via Paul Walmsley <paul@pwsan.com>:

This series adds basic TI DRA7xx PRCM and hwmod support.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/dra7xx_prcm_devel_v3.12/20130823050445/

Note that DRA7xx could not be tested locally, since I don't have a board.

* tag 'omap-for-v3.12/dra7xx-prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: DRA7: Enable PM framework initializations
  ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data
  ARM: OMAP: DRA7: Reuse the omap44xx_restart and fix the device instance
  ARM: OMAP: DRA7: powerdomain: Handle missing vc/vp
  ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header
  ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header
  ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
  ARM: OMAP: DRA7: CM: Add minimal regbit shifts
  ARM: OMAP: DRA7: CM: Add DRA7XX register defines
  ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions
  ARM: DRA7: Add the build support in omap2plus
  ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
  ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
  ARM: DRA7: board-generic: Add basic DT support
  ARM: DRA7: Resue the clocksource, clockevent support
  ARM: DRA7: Reuse io tables and add a new .init_early
  ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29 16:46:14 -07:00
Olof Johansson d5db40a775 Remove exynos4_defconfig because,
- No more used after disabling exynos non-DT
 - exynos_defconfig can support exynos SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSGoSmAAoJEA0Cl+kVi2xqf1kP/RsScHqoVAq5AHh23rTlLaGy
 kO+zQ61dqf1qtGTBsH2pevyNIe2/bcXEIHV+GHw1dmVXy9jJGBFRVaeFYlLjKfG3
 q4P25mZJ1FfClMd1Nud+J6GRnyKYFEZGcHTlSB1BTPEeMAKJH0Nv8KkHkkXb6Rda
 ifABNFxfXJGJ1PQ652Y/jijbgau2kyx+BpWR9cqKKdazFWoq4xelPKRVP7czc7jb
 +t15RazEPv2HFrvTLEIqDsNPKxOJoFNaQwdRuv4YjD5Z4kneqoUojpV3WZxyE6FE
 qQL9ulYd9e8aTU1DTq4VmYzekA96S/VPBJiP6jvSEkEV53XD74s9p/TPQHPdsvQe
 H5YazRU6EhLSiVQH2lZu/Iwz2BNfmj9mWVxl3N+LFUEWrtXe7plytMYiPxShG0JL
 KM6uCCy7ws8QKBcTulelnIdmWZFdFcVY8qN010rV73yVYuyw1eUzzMpysZt8Rb/c
 Lw4LQtVQyQe7dSrnS4perMyNK+RcFDB3Wt+4Fyq4fmibsvnUFPmeGxIJfMekMbyW
 yNMrmRXD4mlpkf2XiBDTANw0MleZ2JzHKMTl5GP8/6/rsFrvuUCpdYnksMj4jJwE
 Js73J7k/fa8wO0HydlkOLwBmkEpWOuzr5y9Bwh/yIICZEkAMthPmuoh3SZRDpbPY
 nz3q7xop0K+/NqgxQxgI
 =hgdN
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
Remove exynos4_defconfig because,
- No more used after disabling exynos non-DT
- exynos_defconfig can support exynos SoCs

* tag 'samsung-defconfig-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: exynos4_defconfig: remove obsolete exynos4_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29 13:23:09 -07:00
Olof Johansson 293d0e3bf0 Merge branch 'armsoc/for-3.12/soc' of git://github.com/broadcom/bcm11351 into next/boards
From Christian Daudt, SoC changes for Broadcom.

* 'armsoc/for-3.12/soc' of git://github.com/broadcom/bcm11351: (673 commits)
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  + Linux 3.11-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29 10:44:42 -07:00
Olof Johansson f0a108b722 Second round of Renesas ARM based SoC cleanups for v3.12
* Remove mach/hardware.h which has no useful contents
 * Remove ag5evm board support
 * Remove kota2 board support
 * Use pm-rmobile on sh7372 and r8a7740 SoCs only, it is otherwise unneeded
 * Remove use of INTC header on r8a7779 and r8a7740 SoCs
 * Cleanup registration of usb phy in r8a7779 SoC
 * Remove '0x's from R8A7779 DTS file for r8a7779 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR+hf1AAoJENfPZGlqN0+++0gP/2hSp6T9qQAmriOeOTE9NrOu
 fLx/d35Q70u5p14NfjKKs0vDIc/II8YqHizHlF5+mW1getnhBDNDS761f6nypmUw
 LE19YgBE/idDEyz4WBbr+YFrXVS1Mq494UzN4esePtTrG2joQIv6krE6SX1shsLz
 yCmUk+zPXEvhv/oVJLahm0pe+UjJHqWbST6gbscL5WTNnfQM3JhQQIJwGruge2Ui
 c0ja+irLphCVgFgVvn1YwgtuvDaoL/qSxqGgESISL2awPEUoF/nQExTQ3U/DjBZN
 VWAYpy6DFyYl5B8ZZh5UUowA7ed/trVVbblsrbu9Z93GxRRgNal/rU1pCS/uPoyw
 Giw3f51VGWrvw5Vrb/Fpl8OsMRn7rpcnWROsR0glkn/DHlNJkw5b60g2lLtYaL4m
 33rNH18l2B+rmzbhsF+kwDR2JxYXyaE+iyfMXGBkhLsRfhCCiUq4iP3+u0hpsnPw
 FB0+ngnlsjypYVLgkkYSUOzvnDHmB3uz+bH+5psDD6+L5+mp7H4KhhTrQXCBqdVZ
 Up2qKT7lJz+T0nnzJQZtXS+n+I4O06ewtghwG3MxtQ/NbwS6mUrqE18YMRj/21Af
 d91bhBnMpWX251T5LRqUlqHQCmVn9F8EuO7VK1qEX0GavxT+71ChlBDSXlGK/uqY
 wZbyX/n24e9B50AeyNVv
 =ujiw
 -----END PGP SIGNATURE-----

Merge tag 'renesas-cleanup2-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/renesas

From Simon Horman:
Second round of Renesas ARM based SoC cleanups for v3.12

* Remove mach/hardware.h which has no useful contents
* Remove ag5evm board support
* Remove kota2 board support
* Use pm-rmobile on sh7372 and r8a7740 SoCs only, it is otherwise unneeded
* Remove use of INTC header on r8a7779 and r8a7740 SoCs
* Cleanup registration of usb phy in r8a7779 SoC
* Remove '0x's from R8A7779 DTS file for r8a7779 SoC

* tag 'renesas-cleanup2-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (74 commits)
  ARM: shmobile: r8a7779: Remove '0x's from R8A7779 DTS file
  ARM: shmobile: r8a7779: cleanup registration of usb phy
  ARM: shmobile: No need to use INTC header on r8a7779
  ARM: shmobile: No need to use INTC demux on r8a7740
  ARM: shmobile: Use pm-rmobile on sh7372 and r8a7740 only
  ARM: shmobile: r8a73a4: Remove ->init_machine() special case
  ARM: shmobile: Remove include <mach/hardware.h>
  ARM: shmobile: Remove Marzen use of <mach/hardware.h>
  ARM: shmobile: Remove r8a7779 use of <mach/hardware.h>
  ARM: shmobile: Remove EMEV2 use of <mach/hardware.h>
  ARM: shmobile: Remove sh7372 use of <mach/hardware.h>
  ARM: shmobile: Remove sh73a0 use of <mach/hardware.h>
  ARCH: ARM: shmobile: Remove ag5evm board support
  ARCH: ARM: shmobile: Remove kota2 board support
  leds: Remove leds-renesas-tpu driver
  ARM: shmobile: sh73a0: Remove all GPIOs
  ARM: shmobile: kota2: Use leds-pwm + pwm-rmob
  ARM: shmobile: armadillo800eva: Add backlight support
  ARM: shmobile: Setup r8a7790 arch timer based on MD pins
  ARM: shmobile: Introduce r8a7790_read_mode_pins()
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-28 09:56:49 -07:00
Tomi Valkeinen 5c61a05dac ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig
The old display drivers are no longer used, and will be phased out. So
remove them from the omap2plus_defconfig.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28 10:23:22 +03:00
Tomi Valkeinen 488e352b2b ARM: OMAP2+: Add selected display drivers to omap2plus_defconfig
Add some of the most common new display drivers to omap2plus_defconfig
to be built as modules.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28 10:23:19 +03:00
Jean-Christophe PLAGNIOL-VILLARD 746831d5a1 ARM: at91: at91_dt_defconfig: enable rm9200 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-26 09:58:29 +02:00
Vladimir Barinov e0c332c671 [media] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig
Add the VIN and ADV7180 drivers to 'marzen_defconfig'.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-25 07:34:52 -03:00
Vladimir Barinov a3fbba0e39 [media] ARM: shmobile: BOCK-W: enable VIN and ML86V7667 in defconfig
Add the VIN and ML86V7667 drivers to 'bockw_defconfig'.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24 04:58:39 -03:00
Kevin Hilman d519049cb1 It contains mxs soc changes for 3.12.
- Run savedefconfig on mxs_defconfig to clean it up
 - Fix on mxs_restart() routine for interrupt context calling
 - A few other random updates and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJSEIhdAAoJEFBXWFqHsHzObxIH/01oTAU3W66NS6sS587KFlqD
 x9SBjFuPqskU41+JumSHD/bi+N969jO4sEBSDg0VG5yM5GM7r0QAlsucNsyrSMqb
 k+Kt2K/dGAVTmvUuHZoT+dgwzPdwRD1Vr1ROpxHFEt9JKhZ6wUR3tTuLEYMmIf9a
 hGweLqQO3Xtv1jCuFvaqsGsxbnkE9fP9LLreaMnd4/bDnsIYgCgKt1hd5hOFawzx
 zvjXC3c0HqSAuB6fISRVPMII640MgNFp3s+UWB8ImMtiL7sdGTwIPq+/viSlgG5C
 iWuaYRgbqqbUZyOn6epEZI304pYy0d7eo6J7wcnnNhGwdrUqyaCV7hLMrs7v9S0=
 =JFhU
 -----END PGP SIGNATURE-----

Merge tag 'mxs-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:

It contains mxs soc changes for 3.12.

- Run savedefconfig on mxs_defconfig to clean it up
- Fix on mxs_restart() routine for interrupt context calling
- A few other random updates and cleanups

* tag 'mxs-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: pm: Include "pm.h"
  ARM: mxs: Simplify detection of CrystalFontz boards
  ARM: mach-mxs: Remove "TO" string from revision field
  ARM: mxs: Fix BUG() when invoking mxs_restart() from interrupt context
  ARM: mxs: Allow DT clock providers
  ARM: mxs_defconfig: Cleanup mxs_defconfig
2013-08-23 12:06:16 -07:00
Kevin Hilman 579673ee1a It contains a bunch of imx soc updates for 3.12.
- Add more ethernet phy fixups for imx6 boards
 - Add some missing imx6q clocks into clock driver
 - Add new clock types fixup mux and div to work around some ugly
   hardware defect
 - Consolidate L2 cache initialization function, so that it can be used
   on more i.MX SoCs
 - Replace magic numbers in mach-imx6q.c with well defined macros
 - Small fixes for imx6q and pllv3 clock drivers
 - Some random updates on imx defconfig files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJSFi1LAAoJEFBXWFqHsHzOpdgIAKegIwrpKKLnTQI7AunLSi5N
 gOhaR4gu0BcsPejFeqCUh5Hs1zun8+MLoc/ZUtg8CQ7PkpkWSHYFOwfefldG0fLC
 9Xt4SsiVNiOEsYRwtoDdEw5JGykSO0htoPOKJ0q+kIuko8mBeAm8r3J2PldF8XxX
 FnHPndXnt6XYuDTOIjyfMtqDfZYAzT1ClZE1dgm7xnsXexT6fT9hdNyrqZidf4Fq
 sWGxgFc3vQVUCJoO8kGQrlFcrH1BbHH0QtrzvMOvdqBmQw2HFdGS52RC83mymeyi
 gcF3edsYF/fxWUoL1omV7K93TakBA5LWDHmCvDUn626fnbinYr+EIhRPomBEC1Y=
 =wgVh
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:

It contains a bunch of imx soc updates for 3.12.

- Add more ethernet phy fixups for imx6 boards
- Add some missing imx6q clocks into clock driver
- Add new clock types fixup mux and div to work around some ugly
  hardware defect
- Consolidate L2 cache initialization function, so that it can be used
  on more i.MX SoCs
- Replace magic numbers in mach-imx6q.c with well defined macros
- Small fixes for imx6q and pllv3 clock drivers
- Some random updates on imx defconfig files

* tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (33 commits)
  phy: micrel: Add definitions for common Micrel PHY registers
  ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option
  ARM: imx: Move anatop related from board file to anatop driver
  ARM: imx_v6_v7_defconfig: Enable wireless support
  ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
  ARM: imx_v6_v7_defconfig: Add SATA support
  ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig
  ARM: mx53: Allow suspend/resume
  ARM: mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level
  ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX
  ARM: imx6q: add vdoa gate clock
  ARM: imx6q: add the missing cko output selection
  ARM: imx6q: add cko2 clocks
  ARM: imx6q: add spdif gate clock
  ARM: imx: clk-pllv3: improve the timeout waiting method
  ARM: imx6: change some clocks to fixup clocks
  ARM: imx: add common clock support for fixup mux
  ARM: imx: add common clock support for fixup div
  ARM: imx: Select MIGHT_HAVE_CACHE_L2X0
  ARM: imx: fix imx_init_l2cache storage class
  ...
2013-08-23 11:38:51 -07:00
Fabio Estevam 7e463b7c1b ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option
Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of
CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which
caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups.

The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783:
Make SND_SOC_IMX_MC13783 visible again), so it is possible to select
CONFIG_SND_SOC_IMX_MC13783 again as originally done.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:53 +08:00
Fabio Estevam 692c89add5 ARM: imx_v6_v7_defconfig: Enable wireless support
Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless
related options.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:50 +08:00
Fabio Estevam 47c484d059 ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
Generate imx_v4_v5_defconfig by doing:

make imx_v4_v5_defconfig
make savedefconfig
cp defconfig arch/arm/configs/imx_v4_v5_defconfig

No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to
make easier and cleaner the addition of new entries.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:49 +08:00
Fabio Estevam bc3059e083 ARM: imx_v6_v7_defconfig: Add SATA support
Let SATA support be built by default.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:47 +08:00
Fabio Estevam 077cfef91b ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig
Generate imx_v6_v7_defconfig by doing:

make savedefconfig

cp defconfig arch/arm/configs/imx_v6_v7_defconfig

No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to
make easier and cleaner the addition of new entries.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:46 +08:00
Fabio Estevam df33e91c32 ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX
egalax touchscren controller is present on mx6 sabresd/sabrelite, so let's
enable it by default.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:20:42 +08:00
Kevin Hilman a9b1ae088d ARM: tegra: defconfig update for 3.12
This defconfig change enables:
 * SYSVIPC (needed for some apps, e.g. fakeroot).
 * Elantech touchpad (touchpad on AC100).
 * SCSI_MULTI_LUN (needed for some USB SD card readers).
 * PCI, MSI, and Tegra's PCIe driver.
 * USB XHCI; useful for testing PCIe.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDl2wAAoJEMzrak5tbycxP68P/0kwdQeEFgqK2Z9ulbz8c7Yo
 FntaP8bXR4/MX/xTTSl50q4I7sbV3V9uYROZHIaXK/t3Q0qsBPVvGavW1DrdKpUG
 mL882e/U6JmG8rxrBH9qm6Iz0PYuTfFW0Hw1Vnm9IRGDmT/STBW7Xy1L00QJckCP
 W+sxxLt7+JE70mVoif5D2XkgntEx+3x0HOe3N281766l76T6DHAm+BrlmCnRDePx
 u8Uxd8IY/EPEvncd06it9IxrqvckkWheg6vpXSSsGZDcBIKrTu80D1oO6jRNaUll
 1IXRB5f3sq20lWSF2+JW8arT6imOM0IMPIkFtKIk0lVWQ2yv+kVa2PfPDRAttbRs
 Y1kaMv3Z9SwT0qlyAw+nakWm0VcbXnKdqtCo1VZ5pJejWcU1Mysgujr1pCf5zf0Q
 oyGnxEooxD+mtY5xtXqhX89US19nCfr6XrvkatOOOMUw4yNaGPEVom8+L5lX3IYt
 XGoVcJivlPheF5uu9PR749X5KgvIYDdedwancT54uoxzf8wVLl9F9gYQC4YdlNQ3
 Ej5ilpH+SWHnstTFxMUISAex/Nh6FKEBu5Hl4vhdaUxqhytW/arKtLEdw4nIsxwi
 wmo8J88/bYBvW/D9dUjs1QLTprgBQT9ZwKO7PxxoOPBIl4oQqZI+IsopqFc+47yk
 8rrp0ZGdgQxS7ThvGUGj
 =nUr/
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/boards

From: Stephen Warren:
ARM: tegra: defconfig update for 3.12

This defconfig change enables:
* SYSVIPC (needed for some apps, e.g. fakeroot).
* Elantech touchpad (touchpad on AC100).
* SCSI_MULTI_LUN (needed for some USB SD card readers).
* PCI, MSI, and Tegra's PCIe driver.
* USB XHCI; useful for testing PCIe.

* tag 'tegra-for-3.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: defconfig updates
2013-08-20 16:26:09 -07:00
Fabio Estevam ac33aa2dd4 ARM: mxs_defconfig: Cleanup mxs_defconfig
Generate mxs_defconfig by doing:

make mxs_defconfig
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig

No functional change. The goal here is to cleanup mxs_defconfig file to
make easier and cleaner the addition of new entries.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 15:46:10 +08:00
Olof Johansson 88ab316f34 mvebu defconfig changes for v3.12
- kirkwood: add i2c devices, ext4, r8169
  - mvebu: gpio-keys, input event
  - dove: SI5351, PCI, xHCI
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQEcBAABAgAGBQJSC+YZAAoJEAi3KVZQDZAeURwH/1aGV9dd1PoEnSeQDVJqAPec
 5B8MZfx94Lgb0xFps1TL2ffKYFEwU6ZdC+ekKRvgIg9cUysXimSVj94LDRS7a8eP
 XgPk74N0RwT9DTaPRf619sjTwM+1tcq6szlluIYkh345mgQ3ggdD/8SXIxofKLxw
 gkm4sVpEz3+bjfR+54m+ZIZcLwT1Rdy9DaXpnK4Tq1GuLu/0XPAx+ssA4InT323W
 synMKVxs1+rUFvVkWJ6ESm8Q6T5I100B4J2MOCp1QsVZQ4IL1jOAEQertdYuMLD5
 a6GYjiG8FKO3VacQfyzcfFoTR1cEvDpA5qgbvuv5AK3GyKUgtSbqGK9qGnadyYo=
 =eADW
 -----END PGP SIGNATURE-----

Merge tag 'defconfig-3.12' of git://git.infradead.org/linux-mvebu into next/boards

From Jason Cooper, mvebu defconfig changes for v3.12:

 - kirkwood: add i2c devices, ext4, r8169
 - mvebu: gpio-keys, input event
 - dove: SI5351, PCI, xHCI

* tag 'defconfig-3.12' of git://git.infradead.org/linux-mvebu:
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  ARM: mvebu: add gpio-keys and input event support in defconfig
  ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-15 23:38:27 -07:00
Olof Johansson 5ddc9d6023 mvebu boards changes for v3.12
- kirkwood
     - convert Dockstar, Guruplug, mv88f6281gtw_ge to DT
     - remove legacy boards (which have DT support) sheevaplug, lacie boards
     - ARRAY_AND_SIZE() cleanup
 
  - dove
     - some DT node updates (depends on irqchip/clocksource DT changes earlier)
     - add the D2Plug board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQEcBAABAgAGBQJSC9u1AAoJEAi3KVZQDZAeakMH/31M/fzEIhREgJyS1paFx9Ed
 8q9ZHQSc2RK4s7mdHCRlvxFbtN3Jas3B+iLGz6iFKsxg+5VNo5aeLPRpjB6dHBek
 /WzvXn+PvGEWGmESk1ZBDmifGfu8y+0cvIiFa93diam4DNCWckD5JtZwl2BXjTDl
 ueCzKohhuTl5pv88tmAR8TWwCYQGM5u0Lqbchxo5AQ51DSqE+U3/agc3p1JVhokF
 Spsh8qGv3VLh15b1r1ZoLMbmnduXthoDbyXy2yq0/JQejx0UMOIoz9WEHA34aFG5
 r6lkb34EfXqPBWwyyTaCvM/1qVKXVuN99nIsM1HQjzjBXYZGNOb9gsnjWVjLQbg=
 =T4jJ
 -----END PGP SIGNATURE-----

Merge tag 'boards-3.12-2' of git://git.infradead.org/linux-mvebu into next/boards

From Jason Cooper, mvebu boards changes for v3.12:

 - kirkwood
    - convert Dockstar, Guruplug, mv88f6281gtw_ge to DT
    - remove legacy boards (which have DT support) sheevaplug, lacie boards
    - ARRAY_AND_SIZE() cleanup

 - dove
    - some DT node updates (depends on irqchip/clocksource DT changes earlier)
    - add the D2Plug board

* tag 'boards-3.12-2' of git://git.infradead.org/linux-mvebu:
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge
  ARM: kirkwood: convert the mv88f6281gtw_ge board to DT
  ARM: kirkwood: remove LaCie boards that are supported through DT
  ARM: kirkwood: remove support for legacy booting of Sheevaplug
  ARM: kirkwood: remove support for legacy booting of Guruplug
  ARM: kirkwood: remove support for legacy booting of Dockstar

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-15 23:29:38 -07:00
Huang Shijie 3da66bfb74 ARM: imx_v6_v7_defconfig: enable WEIM driver
enable the weim driver.
Since the NOR is connected to the WEIM for imx6q{dl}-sabreauto,
we also enable the MTD_PHYSMAP_OF module.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:23 +08:00
Fabio Estevam 8bba8303b0 ARM: imx_v4_v5_defconfig: Select CONFIG_MACH_IMX25_DT
Allow booting a mx25 dt kernel by default.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:22 +08:00
Fabio Estevam c61665982d ARM: imx_v6_v7_defconfig: Enable VPU driver
Let VPU driver be selected by default.

VPU driver requires a SRAM pool, so select CONFIG_SRAM as well.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:22 +08:00
Fabio Estevam 9fe595be2c ARM: imx_v6_v7_defconfig: Enable LVDS Display Bridge
Let IMX_LDB driver be built by default.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:21 +08:00
Fabio Estevam b59aae39cc ARM: imx_v6_v7_defconfig: Enable FSL_LPUART support
Enable the FSL_LPUART driver as it is used by the VF610 family.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:21 +08:00
Fabio Estevam 17c4b89df5 ARM: imx_v6_v7_defconfig: Select CONFIG_NOP_USB_XCEIV by default
In order to get USB functionality on mx5 boards, we need to select
CONFIG_NOP_USB_XCEIV option, so let's enable it by default.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 13:11:20 +08:00
Olof Johansson 6b08e4370c Renesas ARM based SoC defconfig updates for v3.12
* Enable GPIO LEDs and keys for ape6evm board
 * Enable ARM_APPENDED_DTB for marzen board
 * Add lager defconfig board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSAbA2AAoJENfPZGlqN0++ZTcP/3kNOc/gcGXxwn+PpbZBaBdV
 ZaJGGdOmfOBm6FVJrRi30gLZBe7Bi7PJrCNeNt1d53DVR48i2pHjlIcJX0gQ0/rj
 eAJkWIDT43wTU+huu4UMLZhC5PZ12vJ0nHc8SqBBhYJdwvOfEW6BHFvs1meEVdXD
 Bz58ijwHQJ1oOYkFejLQFU52lyU/uCSrErMwqS0CjnUdEW50aKPGYoF/53Vg5Ofl
 mTLbcw0JKUFOqliHI5HClygRPMDST9nRiyJLvJ0LjyrQvSmtACO8oZHYqblzucC9
 SepDTk2qRsC5TbvIj0J78GWiIfXpyDLEYowfc+8u9U3uVutwFnqWzuFEff/oa3DY
 KNBeuAblDTUiNwXJkh+HE3+XVp0/GGXlQrzCXh/UNJiHw/LN4y3y4bTTPh9ri6kP
 t2wyS3Uv+2c/oMeH1coVHyXNiJQ2ZLkhXlbLnCRnvIRXIyQDG072FXE3uCKl9bXk
 jvBYxj6VyDMTmq1IlkXxvIpwl2zOx+K5Y73vjO5jrMHvLdSSCqtq+SL8YhxjIV6R
 CxF+Rs/Oz188JresAM9rAYLaqCKnAZLka06pfzyvwqzX6MsG2TdaJRyskMRigWYG
 e3ZY+rCkt9Sf2CVud1LDTYk6TkS2aINAH9pbEbLomEIhkZrgqdZJgL6M/c+agVE3
 9NzOrU13cHdl4mcS/hby
 =N9gZ
 -----END PGP SIGNATURE-----

Merge tag 'renesas-defconfig-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM based SoC defconfig updates for v3.12

* Enable GPIO LEDs and keys for ape6evm board
* Enable ARM_APPENDED_DTB for marzen board
* Add lager defconfig board

* tag 'renesas-defconfig-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: ape6evm: Enable gpio-leds in defconfig
  ARM: shmobile: ape6evm: Enable gpio-keys in defconfig
  ARM: shmobile: Add lager defconfig
  ARM: shmobile: marzen: Enable ARM_APPENDED_DTB in defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-14 01:02:48 -07:00
R Sricharan 8dd21c9319 ARM: DRA7: Add the build support in omap2plus
Now that all the needed pieces for DRA7 based SoCs' is present, enable
the build support in omap2plus_defconfig

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
2013-08-13 16:58:16 +05:30
Stephen Warren 25819408cd ARM: tegra: defconfig updates
Enable:
* SYSVIPC (needed for some apps, e.g. fakeroot).
* Elantech touchpad (touchpad on AC100).
* SCSI_MULTI_LUN (needed for some USB SD card readers).
* PCI, MSI, and Tegra's PCIe driver.
* USB XHCI; useful for testing PCIe.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 15:14:44 -06:00
Sebastian Hesselbarth 697004aebf ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
This adds SI5351 clock driver found on the SolidRun CuBox, PCI driver
and USB 3.0 xHCI driver found on the Globalscale D3Plug to dove_defconfig.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12 19:57:38 +00:00
Jason Cooper d04d97c264 ARM: kirkwood: fix DT building and update defconfig
commit

  844703c ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code

removed the last kirkwood DT/platform board in kirkwood_defconfig, this
triggered a rescan of the config symbols, the result of which breaks the
build because KIRKWOOD_DT does not select OF_IRQ.

This commit fixes the regression and updates the defconfig to
explicitly enable SERIAL_OF_PLATFORM and KIRWOOD_DT.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12 18:44:28 +00:00
Jamie Lentin 844703c1ad ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
No platform code left now, so remove all references to it.

The reset gpio code didn't work to begin with, it will be replaced with
a DT node at a future date. -jc

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12 18:43:35 +00:00
Matt Porter be13c36adb ARM: configs: disable DEBUG_LL in bcm_defconfig
DEBUG_LL is not supported yet on bcm281xx and causes a temporary
hang due to timeout at boot.

Signed-off-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Christian Daudt <csd@broadcom.com>
2013-08-08 15:19:20 -07:00
Markus Mayer 6dea0df2e7 ARM bcm281xx: Turn on socket & network support.
We need this so an actual disk-based root file system will work.

Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Acked-by: Christian Daudt <csd@broadcom.com>
2013-08-06 15:35:47 -07:00
Simon Horman 461cd47a65 ARM: shmobile: ape6evm: Enable gpio-leds in defconfig
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06 10:14:09 +09:00
Simon Horman ab4d2cd1c9 ARM: shmobile: ape6evm: Enable gpio-keys in defconfig
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06 10:14:06 +09:00
Thomas Petazzoni 7567facba5 ARM: mvebu: add gpio-keys and input event support in defconfig
Some Armada 370/XP boards have GPIO buttons, so it makes sense to
enable gpio-keys and the input event interface in mvebu_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-03 18:12:17 +00:00
Simon Horman 7c7d3d596c ARM: shmobile: Add lager defconfig
This is intended to be used until multi-arch is able to be
used for the lager board at which time a more generic configuration
will be used in place of this one.

Acked-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-01 16:30:15 +09:00
Simon Horman 8c167a825d ARM: shmobile: marzen: Enable ARM_APPENDED_DTB in defconfig
"ARM: shmobile: marzen: Switch to DT_MACHINE_START" moves marzen
over to use DT_MACHINE_START, however, the prevalent boot loader
does not support booting with a separate dtb. Thus, it makes
sense to use ARM_APPENDED_DTB by default.

This is consistent with other shmobile defconfigs.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30 13:28:55 +09:00