Граф коммитов

1059 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds aace99e57c Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab.

Trivial conflict due to new USB HID ID's being added next to each other
(Baanto vs Axentia).

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits)
  [media] smia: Fix compile failures
  [media]  Fix VIDIOC_DQEVENT docbook entry
  [media] s5p-fimc: Fix control creation function
  [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
  [media] s5p-mfc: Fix setting controls
  [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
  [media] v4l/s5p-mfc: corrected encoder v4l control definitions
  [media] v4l: mem2mem_testdev: Fix race conditions in driver
  [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
  [media] cxd2820r: Fix an incorrect modulation type bitmask
  [media] em28xx: Show a warning if the board does not support remote controls
  [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
  [media] USB: Staging: media: lirc: initialize spinlocks before usage
  [media] Revert "[media] media: mx2_camera: Fix mbus format handling"
  [media] bw-qcam: driver and pixfmt documentation fixes
  [media] cx88: fix firmware load on big-endian systems
  [media] cx18: support big-endian systems
  [media] ivtv: fix support for big-endian systems
  [media] tuner-core: return the frequency range of the correct tuner
  [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
  ...
2012-06-25 14:53:09 -07:00
Hans de Goede 5daf53a6eb [media] snd_tea575x: Make the module using snd_tea575x the fops owner
Before this patch the owner field of the /dev/radio# device fops was set to
the snd-tea575x-tuner module itself. Meaning that the module which was using
it could be rmmod-ed while the device is open, and then BAD things happen.

I know, as I found out the hard way :)

Note that there is no need to also somehow increase the refcount of the
snd-tea575x-tuner module itself, since any drivers using it will have
symbolic references to it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:02:54 -03:00
Takashi Iwai 85e184e4c3 ASoC: Last minute updates
These are all new code, they've been in -next already so should be OK
 for merge this time round.  I'd been planning to send a pull request
 today after they'd had a bit of exposure there to make sure breakage
 didn't propagate into your tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuldTAAoJEBus8iNuMP3d+AgP/jqsjHm4DRXw48OMO3gX45yN
 Y9JsvMQRYtiUY/zmfHKm8J2BoH3N1SdQjFXzp7qpAJ1RIz5aEKQu41ji/xDOSiu7
 X/SxPxeMumZp50HjQS3VHyrwtkd+bwprbG0/Hk2TPnZ2aY6WQ6pfC3smHQYKQ75m
 saXrpmTv7s4zgAN2KXw35m304WvifuQ/KvUs/PU5LFVdy38YXacA0SMusTV6H2VG
 DN5ENxT2e9NYU5zTCTEVmK7vwoApsX7PmnDor6KygGUceGijHHmDtDqRWBxelVJv
 MS+LQsM3xdqRkX4gETtzg4EN7taRLRJQAFFImM32+M3u4g2Q2fYSpIEPYrf5SatP
 GxpcZogDtjs6e+SqtWQb8vFmVCEq/6icMpOzmUQZhoKjF4D5QO7gGN8LLPiahons
 Cc1C3L2JQO1tZ9vryt6aEub2vUNm7KO22ODqYo6xVYBaYYl8vv9WXvLv7TgTSocF
 YwsxaRfFTy8jlP1OFVsywQa5k1yPb/twD9HFNpwTUtMrMP4QPdp7wvJaDJrBBXxi
 U8uD/JSub/0CDjlYgvB/f6LRTZdjeVeirR9AyAyiLKnj9YxdrmY0v6n40voDFwMg
 wLGECAdksuDSfnnN7+k+LM7bRDycQhO/QMV7t6ZdtMl5KdQZ69KoK4qdyoLq4BUi
 c3LRJaPlV6tmI54YrhRN
 =5L34
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Last minute updates

These are all new code, they've been in -next already so should be OK
for merge this time round.  I'd been planning to send a pull request
today after they'd had a bit of exposure there to make sure breakage
didn't propagate into your tree.
2012-05-22 02:58:55 +02:00
Takashi Iwai 382e6a859e Merge branch 'topic/misc' into for-linus 2012-05-21 12:51:35 +02:00
Kuninori Morimoto 766812e6d5 ASoC: sh: fsi: enable chip specific data transfer mode
SupherH FSI2 can use special data transfer,
but it depends on CPU-FSI2 connection style.

We can use 16bit data stream mode if it was valid connection,
and it is required for 16bit data DMA transfer / SPDIF sound output.
We can use 24bit data transfer if it was invalid connection.

We can select connection type if CPU is SH7372,
and it is always valid connection if latest SuperH.

This patch adds new bus_option and fsi_bus_setup()
for supporting these feature.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19 19:41:45 +01:00
Mark Brown a91b778219 ASoC: max98095: Single bit bitfields should be unsigned
There's no space for the sign bit.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 23:33:53 +01:00
Mark Brown 623682941a ASoC: core: Allow DAIs to specify a base address
Devices with many DAIs are becoming more and more common, and generally
the more modern devices have consistent register layouts between DAIs.
Rather than have drivers open code lookups based on the DAI ID or cause
uglification in UI by having register addresses for IDs provide a base
address field they can use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-05-02 15:42:27 +01:00
Brian Austin dfe0f98b8d ASoC: Add support for CS42L52 Codec
This patch adds support for Cirrus Logic CS42L52 Low Power Stereo Codec

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Georgi Vlaev <joe@nucleusys.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-30 23:36:20 +01:00
Liam Girdwood 07bf84aaf7 ASoC: dpcm: Add bespoke trigger()
Some on SoC DSP HW is very tightly coupled with DMA and DAI drivers. It's
necessary to allow some flexability wrt to PCM operations here so that we
can define a bespoke DPCM trigger() PCM operation for such HW.

A bespoke DPCM trigger() allows exact ordering and timing of component
triggering by allowing a component driver to manage the final enable
and disable configurations without adding extra complexity to other
component drivers. e.g. The McPDM DAI and ABE are tightly coupled on
OMAP4 so we have a bespoke trigger to manage the trigger to improve
performance and reduce complexity when triggering new McPDM BEs.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 17:48:42 +01:00
Liam Girdwood 47c88ffff7 ASoC: dpcm: Add API for DAI link substream and runtime lookup
Some component drivers will need to be able to look up their
DAI link substream and RTD data. Provide a mechanism for this.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 17:48:19 +01:00
Liam Girdwood 618dae11f8 ASoC: dpcm: Add runtime dynamic route update
This patch allows DPCM to dynamically alter the FE to BE PCM links
at runtime based on mixer setting updates. DAPM is looked up after
every mixer update and we perform a DPCM runtime update if the
mixer has a change of value.

This patchs adds/changes the following :-

 o Adds DPCM runtime update core.
 o Changes soc_dapm_mixer_update_power() and soc_dapm_mux_update_power()
   to return if a change has occured rather than 0. No other users check
   atm.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 17:48:19 +01:00
Liam Girdwood f86dcef87b ASoC: dpcm: Add debugFS support for DPCM
Add debugFS files for DPCM link management information.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 17:48:19 +01:00
Liam Girdwood 01d7584cd2 ASoC: dpcm: Add Dynamic PCM core operations.
The Dynamic PCM core allows digital audio data to be dynamically
routed between different ALSA PCMs and DAI links on SoC CPUs with
on chip DSP devices. e.g. audio data could be played on pcm:0,0 and
routed to any (or all) SoC DAI links.

Dynamic PCM introduces the concept of Front End (FE) PCMs and Back
End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that
they can dynamically route digital audio data to any supported BE
PCM. A BE PCM has no ALSA device, but represents a DAI link and it's
substream and audio HW parameters.

e.g. pcm:0,0 routing digital data to 2 external codecs.

FE pcm:0,0  ----> BE (McBSP.0) ----> CODEC 0
             +--> BE (McPDM.0) ----> CODEC 1

e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec.

FE pcm:0,0 ---
             +--> BE (McBSP.0) ----> CODEC
FE pcm:0,1 ---

The digital audio routing is controlled by the usual ALSA method
of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the
routing based upon the mixer settings and configures the BE PCMs
based on routing and the FE HW params.

DPCM is designed so that most ASoC component drivers will need no
modification at all. It's intended that existing CODEC, DAI and
platform drivers can be used in DPCM based audio devices without
any changes. However, there will be some cases where minor changes
are required (e.g. for very tightly coupled HW) and there are
helpers to support this too.

Somethimes the HW params of a FE and BE do not match or are
incompatible, so in these cases the machine driver can reconfigure
any hw_params and make any DSP perform sample rate / format conversion.

This patch adds the core DPCM code and contains :-

 o The FE and BE PCM operations.
 o FE and BE DAI link support.
 o FE and BE PCM creation.
 o BE support API.
 o BE and FE link management.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26 17:48:19 +01:00
Kristoffer KARLSSON dd7b10b30c ASoC: core: Add strobe control
Added support for a control that strobes a bit in
a register to high then back to low (or the inverse).

This is typically useful for hardware that requires
strobing a singe bit to trigger some functionality
and where exposing the bit in a normal single control
would require the user to first manually set then
again unset the bit again for the strobe to trigger.

Added convenience macro.

SOC_SINGLE_STROBE

Added accessor implementations.

snd_soc_get_strobe
snd_soc_put_strobe

Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23 20:05:06 +01:00
Kristoffer KARLSSON 4183eed288 ASoC: core: Add signed multi register control
Added control type that can span multiple consecutive codec registers
forming a single signed value in a MSB/LSB manner.
The control dynamically adjusts to the register word size configured
in driver.

Added convenience macro.

SOC_SINGLE_XR_SX

Added accessor implementations.

snd_soc_info_xr_sx
snd_soc_get_xr_sx
snd_soc_put_xr_sx

Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23 20:05:06 +01:00
Liam Girdwood ec2e3031b6 ASoC: dapm: Add API call to query valid DAPM paths
In preparation for ASoC DSP support.

Add a DAPM API call to determine whether a DAPM audio path is valid between
source and sink widgets. This also takes into account all kcontrol mux and mixer
settings in between the source and sink widgets to validate the audio path.

This will be used by the DSP core to determine the runtime DAI mappings
between FE and BE DAIs in order to run PCM operations.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18 18:23:00 +01:00
Ricardo Neri 7ba1c40b53 ALSA: Add definitions for CEA-861 Audio InfoFrames
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames
are used in HDMI and DisplayPort to describe the parameters of the audio
stream. Hence, drivers for such devices may use these definitions to, for
instance, fill a CEA-861 data structure and pass it to a display driver
to configure an IP.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-18 08:00:36 +02:00
Mark Brown d5efccd5b6 Linux 3.4-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEbBAABAgAGBQJPi3XOAAoJEHm+PkMAQRiGnsUH9RjHwH4YFVyuP/DKtKa6zs74
 wqkpT15yITQ5WWMog4JaJFFg5rJCUd8QZr7AS/HSn0ijDyZX5VU7Rcs9cMudDzNR
 H/5K/AscS4fjb0HwWVqoltTWHRb9QGSwVN3+E3VCDLt9P89YJ0o3QztkkuEX5dkZ
 jc7reVXTfRnCcILEa9jleOzrn+OLM3j/jAjQ2hGunl8EDLzD4b17HHPoli4jEZ/5
 5ibpSVsPD+AqzN+glbXvYjVItl12D0IQos/JdOwfuZriCVWLxysSSwHZTbPCyvBZ
 LHH4HR5T+XLSXbjJeNkUFHLzqU+d5gVRadIoWtJCxqxFjKbOs2YtzJ5Ai0nDiw==
 =kTkC
 -----END PGP SIGNATURE-----

ASoC: Merge tag 'v3.4-rc3' into for-3.5

Linux 3.4-rc3 contains a bunch of Tegra changes which are conflicting
annoyingly with the new development that's going on for Tegra so merge
it up to resolve those conflicts.

Conflicts:
	sound/soc/soc-core.c
	sound/soc/tegra/tegra_i2s.c
	sound/soc/tegra/tegra_spdif.c
2012-04-16 19:40:27 +01:00
Mark Brown c74184ed30 ASoC: core: Support transparent CODEC<->CODEC DAI links
Rather than having the user half start a stream but avoid any DMA to
trigger data flow on links which don't pass through the CPU create a
DAPM route between the two DAI widgets using a hw_params configuration
provided by the machine driver with the new 'params' member of the
dai_link struct.  If no configuration is provided in the dai_link then
use the old style even for CODEC<->CODEC links to avoid breaking
systems.

This greatly simplifies the userspace usage of such links, making them
as simple as analogue connections with the stream configuration being
completely transparent to them.

This is achieved by defining a new dai_link widget type which is created
when CODECs are linked and triggering the configuration of the link via
the normal PCM operations from there.  It is expected that the bias
level callbacks will be used for clock configuration.

Currently only the DAI format, rate and channel count can be configured
and currently the only DAI operations which can be called are hw_params
and digital_mute().  This corresponds well to the majority of CODEC
drivers which only use other callbacks for constraint setting but there
is obviously much room for extension here.  We can't simply call
hw_params() on startup as things like the system clocking configuration
may change at runtime and in future it will be desirable to offer some
configurability of the link parameters.

At present we are also restricted to a single DAPM link for the entire
DAI.  Once we have better support for channel mapping it would also be
desirable to extend this feature so that we can propagate per-channel
power state over the link.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-16 19:36:29 +01:00
Kuninori Morimoto af8a2fe12f ASoC: sh: fsi: use simple-card instead of fsi-ak4642
This patch uses simple-card driver instead of fsi-ak4642 on each board.
To select AK4642 driver, each boards select it on Kconfig.

This patch removes fsi-ak4642 driver which is no longer needed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:26 +01:00
Kuninori Morimoto f2390880ec ASoC: add generic simple-card support
Current ASoC requires card.c file to each platforms in order to
specifies its CPU and Codecs pair.
But the differences between these were only value/strings of setting.
In order to reduce duplicate driver, this patch adds generic/simple-card.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:25 +01:00
Fengguang Wu fae3d88a5c ALSA: hda - hide HDMI/ELD printks unless snd.debug=2
Also remove two warnings when CONFIG_SND_DEBUG is not set:

sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable]
sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable]

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-10 14:53:55 +02:00
Mark Brown 41b5b3bd5b ASoC: dapm: Allow DAPM registers to be 31 bit
Supports larger register maps, not using unsigned ints for the full 32
bit as we rely on checking for negative registers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-04 12:35:20 +01:00
Brian Austin 1d99f2436d ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV
Some codecs namely Cirrus Logic Codecs have a way of wrapping the dB scale around 0dB without 0dB being in the middle.

Rework of SOC_DOUBLE_R_SX_TLV to be more consistent with other asoc tlv macros.
Add single register macro : SOC_SINGLE_SX_TLV.
Use snd_soc_info_volsw for .info
Use snd_soc_get_volsw_sx, snd_soc_put_volsw_sx for single and double.

kcontrols for CS42L51 and CS42L73 are adjusted to these new TLV Macros.

The max value is determined by: (number of steps) +1 for 0dB +max from codec datasheet.

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-03 11:43:23 +01:00
Mark Brown eb794077b8 ASoC: dapm: Remove SND_SOC_DAPM_MICBIAS_E()
There are no users any more and new drivers should be using supply widgets
which fully replace it anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
2012-04-01 11:28:30 +01:00
Rhyland Klein 9dd90c5db0 ASoC: max98095: add jack detection
This change adds the logic to support using the jack detect mechanism built
in to the codec to detect both when a jack was inserted and what type of
jack is present.

This change also supports the use of an external mechanism for headphone
detection. If this mechanism exists, when the max98095_jack_detect function
is called, the hp_jack is simply passed NULL.

This change supports both simple headphones, powered headphones, microphones
and headsets with both headphones and a mic.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:24 +01:00
Mark Brown b19e6e7b76 ASoC: core: Use driver core probe deferral
In version 3.4 the driver core acquired probe deferral which is a core way
of doing essentially the same thing as ASoC has been doing since forever
to make sure that all the devices needed to make up the card are present
without needing open coding in the subsystem.

Make basic use of this probe deferral mechanism for the cards, removing the
need to handle partially instantiated cards. We should be able to remove
even more code than this, though some of the checks we're currently doing
should stay since they're about things like suppressing unneeded DAPM runs
rather than deferring probes.

In order to avoid robustness issues with our teardown paths (which do need
quite a bit of TLC) add a check for aux_devs prior to attempting to set
things up, this means that we've got a reasonable idea that everything will
be there before we start. As with the removal of partial instantiation
support more work will be needed to make this work neatly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-01 11:28:23 +01:00
Mark Brown 2667b4b8be ASoC: jack: Push locking for jacks down to the jack
Currently operations on jack reporting take the CODEC mutex both to protect
the current jack status and also to protect the DAPM run which is triggered
on status updates. Since the addition of a DAPM-specific lock we no longer
need to worry about locking DAPM as it has its own finer grained lock so
create a per jack lock to take care of the jack status.

This is both cleaner where the jack isn't specifically associated with a
CODEC and clearer as it's much more obvious what the lock is protecting.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:23 +01:00
Liam Girdwood a3cc056b64 ASoC: dapm: Add regulator member to struct dapm_widget
Currently DAPM widgets use the private data for their regulator.
Add a regulator * for widgets to use instead of private data.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:22 +01:00
Liam Girdwood 3cd043436c ASoC: dapm: Rename dapm mutex subclass to better match usage
Rename SND_SOC_DAPM_CLASS_PCM to SND_SOC_DAPM_CLASS_RUNTIME to
better match the usage and align with card mutex too.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:22 +01:00
Liam Girdwood 6874a918de ASoC: core: Rename card mutex subclass to better align with usage
Change SND_SOC_CARD_CLASS_PCM to SND_SOC_CARD_CLASS_RUNTIME to better
describe all uses for this mutex subclass and align with DAPM too.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:22 +01:00
Liam Girdwood d9b0951b96 ASoC: dapm: Add platform stream event support
Currently stream events are only perfomed on codec stream widgets only.
There is now a need to be able to perform stream events on platform
widgets too.

e.g. we have the ABE platform driver with several DAI links
to dummy codecs. We need to be able to perform stream events on any
of the dummy codec DAI links.

This patch also removes the snd_soc_dai * parameter since it's already
contained within the rtd * parameter.

Finally makle stream event return void since no one checks it anyway.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:22 +01:00
Liam Girdwood be09ad90e1 ASoC: core: Add platform DAI widget mapping
Add platform driver support for CPU DAI DAPM widgets.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:21 +01:00
Liam Girdwood a73fb2df01 ASoC: dapm: Use DAPM mutex for DAPM ops instead of codec mutex
It has now become necessary to use a DAPM mutex instead of the codec
mutex to lock the DAPM operations. This is due to the recent multi
component support and forth coming Dynamic PCM updates.

Currently we lock DAPM operations with the codec mutex of the calling
RTD context. However, DAPM operations can span the whole card context
and all components.

This patch updates the DAPM operations that use the codec mutex to
now use the DAPM mutex PCM subclass for all DAPM ops.

We also add a mutex subclass for DAPM init and PCM operations.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:21 +01:00
Liam Girdwood 01b9d99a1f ASoC: core: Add card mutex locking subclasses
This is the first part of a change that is intended to improve
ASoC locking protection for DAPM and PCM operations.

This part of the series adds a mutex class for the soc_card mutex. The
SND_SOC_CARD_CLASS_INIT class is used for card initialisation only whilst the
SND_SOC_CARD_CLASS_PCM class is used for the forth coming Dynamic
PCM operations. The new mutex classes are required otherwise we will see a false
positive mutex deadlock warning between the card initialisation and the PCM
operations (something that would never deadlock in real life).

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:21 +01:00
Linus Torvalds 250f6715a4 The following text was taken from the original review request:
"[RFC PATCH 0/2] audit of linux/device.h users in include/*"
 		https://lkml.org/lkml/2012/3/4/159
 --
 
 Nearly every subsystem has some kind of header with a proto like:
 
 	void foo(struct device *dev);
 
 and yet there is no reason for most of these guys to care about the
 sub fields within the device struct.  This allows us to significantly
 reduce the scope of headers including headers.  For this instance, a
 reduction of about 40% is achieved by replacing the include with the
 simple fact that the device is some kind of a struct.
 
 Unlike the much larger module.h cleanup, this one is simply two
 commits.  One to fix the implicit <linux/device.h> users, and then
 one to delete the device.h includes from the linux/include/ dir
 wherever possible.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPbNxLAAoJEOvOhAQsB9HWR6QQAMRUZ94O2069/nW9h4TO/xTr
 Hq/80lo/TBBiRmob3iWBP76lzgeeMPPVEX1I6N7YYlhL3IL7HsaJH1DvpIPPHXQP
 GFKcBsZ5ZLV8c4CBDSr+/HFNdhXc0bw0awBjBvR7gAsWuZpNFn4WbhizJi4vWAoE
 4ydhPu55G1G8TkBtYLJQ8xavxsmiNBSDhd2i+0vn6EVpgmXynjOMG8qXyaS97Jvg
 pZLwnN5Wu21coj6+xH3QUKCl1mJ+KGyamWX5gFBVIfsDB3k5H4neijVm7t1en4b0
 cWxmXeR/JE3VLEl/17yN2dodD8qw1QzmTWzz1vmwJl2zK+rRRAByBrL0DP7QCwCZ
 ppeJbdhkMBwqjtknwrmMwsuAzUdJd79GXA+6Vm+xSEkr6FEPK1M0kGbvaqV9Usgd
 ohMewewbO6ddgR9eF7Kw2FAwo0hwkPNEplXIym9rZzFG1h+T0STGSHvkn7LV765E
 ul1FapSV3GCxEVRwWTwD28FLU2+0zlkOZ5sxXwNPTT96cNmW+R7TGuslZKNaMNjX
 q7eBZxo8DtVt/jqJTntR8bs8052c8g1Ac1IKmlW8VSmFwT1M6VBGRn1/JWAhuUgv
 dBK/FF+I1GJTAJWIhaFcKXLHvmV9uhS6JaIhLMDOetoOkpqSptJ42hDG+89WkFRk
 o55GQ5TFdoOpqxVzGbvE
 =3j4+
 -----END PGP SIGNATURE-----

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull <linux/device.h> avoidance patches from Paul Gortmaker:
 "Nearly every subsystem has some kind of header with a proto like:

	void foo(struct device *dev);

  and yet there is no reason for most of these guys to care about the
  sub fields within the device struct.  This allows us to significantly
  reduce the scope of headers including headers.  For this instance, a
  reduction of about 40% is achieved by replacing the include with the
  simple fact that the device is some kind of a struct.

  Unlike the much larger module.h cleanup, this one is simply two
  commits.  One to fix the implicit <linux/device.h> users, and then one
  to delete the device.h includes from the linux/include/ dir wherever
  possible."

* tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  device.h: audit and cleanup users in main include dir
  device.h: cleanup users outside of linux/include (C files)
2012-03-24 10:41:37 -07:00
Linus Torvalds 8e3ade251b Merge branch 'akpm' (Andrew's patch-bomb)
Merge second batch of patches from Andrew Morton:
 - various misc things
 - core kernel changes to prctl, exit, exec, init, etc.
 - kernel/watchdog.c updates
 - get_maintainer
 - MAINTAINERS
 - the backlight driver queue
 - core bitops code cleanups
 - the led driver queue
 - some core prio_tree work
 - checkpatch udpates
 - largeish crc32 update
 - a new poll() feature for the v4l guys
 - the rtc driver queue
 - fatfs
 - ptrace
 - signals
 - kmod/usermodehelper updates
 - coredump
 - procfs updates

* emailed from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
  seq_file: add seq_set_overflow(), seq_overflow()
  proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate().
  procfs: speed up /proc/pid/stat, statm
  procfs: add num_to_str() to speed up /proc/stat
  proc: speed up /proc/stat handling
  fs/proc/kcore.c: make get_sparsemem_vmemmap_info() static
  coredump: add VM_NODUMP, MADV_NODUMP, MADV_CLEAR_NODUMP
  coredump: remove VM_ALWAYSDUMP flag
  kmod: make __request_module() killable
  kmod: introduce call_modprobe() helper
  usermodehelper: ____call_usermodehelper() doesn't need do_exit()
  usermodehelper: kill umh_wait, renumber UMH_* constants
  usermodehelper: implement UMH_KILLABLE
  usermodehelper: introduce umh_complete(sub_info)
  usermodehelper: use UMH_WAIT_PROC consistently
  signal: zap_pid_ns_processes: s/SEND_SIG_NOINFO/SEND_SIG_FORCED/
  signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig()
  signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths
  signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE
  Hexagon: use set_current_blocked() and block_sigmask()
  ...
2012-03-23 16:59:10 -07:00
Bobby Powers 10db4e1e4e headers: include linux/types.h where appropriate
This addresses some header check warnings.  DRM headers which include
"drm.h" have been excluded, as they indirectly include types.h.

Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:31 -07:00
Linus Torvalds e317234975 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...
2012-03-23 14:39:09 -07:00
Mauro Carvalho Chehab 9ce28d827f Merge tag 'v3.3' into staging/for_v3.4
* tag 'v3.3': (1646 commits)
  Linux 3.3
  Don't limit non-nested epoll paths
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]
  afs: Remote abort can cause BUG in rxrpc code
  afs: Read of file returns EBADMSG
  C6X: remove dead code from entry.S
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()
  MAINTAINERS: Add Serge as maintainer of capabilities
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  ...
2012-03-19 13:41:24 -03:00
Hans Verkuil d4ecc83b79 [media] tea575x-tuner: update to latest V4L2 framework requirements
The tea575x-tuner module has been updated to use the latest V4L2 framework
functionality. This also required changes in the drivers that rely on it.

The tea575x changes are:

- The drivers must provide a v4l2_device struct to the tea module.
- The radio_nr module parameter must be part of the actual radio driver,
  and not of the tea module.
- Changed the frequency range to the normal 76-108 MHz range instead of
  50-150.
- Add hardware frequency seek support.
- Fix broken rxsubchans/audmode handling.
- The application can now select between stereo and mono.
- Support polling for control events.
- Add V4L2 priority handling.

And radio-sf16fmr2.c now uses the isa bus kernel framework.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 11:27:21 -03:00
Takashi Iwai ca3e9297e2 Merge branch 'topic/jack' into for-linus 2012-03-18 18:22:50 +01:00
Takashi Iwai cb3f2adc03 Merge branch 'topic/asoc' into for-linus 2012-03-18 18:22:37 +01:00
Takashi Iwai 44c76a960a Merge branch 'topic/misc' into for-linus 2012-03-18 18:22:33 +01:00
Paul Gortmaker 313162d0b8 device.h: audit and cleanup users in main include dir
The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.

Clean up the users as follows:

1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.

2) For headers not really using anything from device.h, simply
delete the include altogether.

3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h

4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).

Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.

Total removals from #1 and #2: 51.  Total additions coming
from #3: 9.  Total other implicit dependencies from #4: 7.

As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-16 10:38:24 -04:00
Mark Brown 4af87a939e ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list
Allows the constraint lists to be declared const by drivers which seems
reasonable; there's plenty of other constification we could do if we were
being complete but this was easy and quick.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-15 07:35:17 +01:00
Takashi Iwai 28aa165cc5 ALSA: ymfpci - Fix legacy registers on S3/S4 resume
We need to resume two legacy registers to recover MIDI/FM functionality
on S3/S4 resume, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13 08:12:33 +01:00
Takashi Iwai 2ad787e9aa ALSA: Add a hook capability to vmaster controls
This patch adds a hook to vmaster control to be called at each time
when the master value is changed.  It'd be handy for an additional
mute LED control following the Master switch, for example.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12 13:58:54 +01:00
Liam Girdwood cc22d37e7f ASoC: core: Add platform component mutex
Add mutex support for platform IO operations. e.g. can be used
for platform DAPM widget IO ops.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06 20:07:00 +00:00
Mark Brown 2466ab9709 ASoC: core: Split the union for CODEC/platform in the DAI
There's now core code which falls back to global CODEC operations for
DAI calls that needs to be able to tell if it's dealing with a CPU or
CODEC DAI and given the small number of DAIs in a typical system and
overall memory usage pattern saving a pointer per DAI is really not
worth the effort.

Reported-by: Ian Lartey <ian@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-04 13:44:01 +00:00