Граф коммитов

4488 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds eab3540562 ARM: SoC-related driver updates
Various driver updates for platforms:
 
  - Nvidia: Fuse support for Tegra194, continued memory controller pieces
    for Tegra30
 
  - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
 
  - NXP/FSL: i.MX8MP SoC driver pieces
 
  - TI Keystone: ring accelerator driver
 
  - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
 
  - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
    communication for power management
 
  - Overall support patch set for cpuidle on more complex hierarchies
    (PSCI-based)
 
 + Misc cleanups, refactorings of Marvell, TI, other platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4+lTYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3nQcQAJm91+6hZbmMjlBySGS7ISjYvOcrI/hMgiOl
 uhhEP0Dcylvf9A9x3wcIbLwixe+2pvie9DQh2u5F80ShYimidtFi/2xCfuTb9fKu
 sxxKjrXWyVKhkpW0z+tedY08ftVhkwwcyD4m2C7uVl6AwTP7c367vFeU7XjF2APn
 drfgmgbjm8U3XbSyAqv+k6z6tyqaCnFM7vbPupSKHgHJ3mfByxOa+XyBN2RdgBbs
 0KrVfbXGv80zFIFrMPwaWG7G52bu7K68nVdgy44MpKdRZ6QTjhnR+kerFxHsYgV4
 bM55Fya52nTCSTGdKaQakDtKwbAUdCDTSkxgOHGcQoyFi0R/VaEUJtcysnvLbI6c
 +n/yFIzGyEdXcvIzfv2SoDYhogw19I6RR/M9K5Ni29eazkDVYx2z3rI+2QYeqCiF
 u7cq52gW6JLP0SI/9kuUrRFiR8v19Ixap7qokAxgqQwYB3NzT8a7WsYPkzdpDZGQ
 ETSDFMyBWT6UvBe/HWkQluBabbet53rG8BF0OHFrQuMK0u/ieKgSGuTB9XN2djEW
 PHMOMz2vhi+8XTfpkskhF2tTxlA/k4R6QwCdIMpIkMRVnVQCh1XdPr3Fi2NrgB+S
 kIXHD4vV6zLYh04zHyKewSPHAXWgraFpg2qKnvL5+KWMTnW6QH+RNjOt9xKDNXOd
 +iDXpOad
 =ONtb
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - Nvidia: Fuse support for Tegra194, continued memory controller
     pieces for Tegra30

   - NXP/FSL: Refactorings of QuickEngine drivers to support
     ARM/ARM64/PPC

   - NXP/FSL: i.MX8MP SoC driver pieces

   - TI Keystone: ring accelerator driver

   - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.

   - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
     communication for power management

   - Overall support patch set for cpuidle on more complex hierarchies
     (PSCI-based)

  and misc cleanups, refactorings of Marvell, TI, other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
  drivers: soc: xilinx: Use mailbox IPI callback
  dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
  drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
  MAINTAINERS: Add brcmstb PCIe controller entry
  soc/tegra: fuse: Unmap registers once they are not needed anymore
  soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
  soc/tegra: fuse: Warn if straps are not ready
  soc/tegra: fuse: Cache values of straps and Chip ID registers
  memory: tegra30-emc: Correct error message for timed out auto calibration
  memory: tegra30-emc: Firm up hardware programming sequence
  memory: tegra30-emc: Firm up suspend/resume sequence
  soc/tegra: regulators: Do nothing if voltage is unchanged
  memory: tegra: Correct reset value of xusb_hostr
  soc/tegra: fuse: Add APB DMA dependency for Tegra20
  bus: tegra-aconnect: Remove PM_CLK dependency
  dt-bindings: mediatek: add MT6765 power dt-bindings
  soc: mediatek: cmdq: delete not used define
  memory: tegra: Add support for the Tegra194 memory controller
  memory: tegra: Only include support for enabled SoCs
  memory: tegra: Support DVFS on Tegra186 and later
  ...
2020-02-08 14:04:19 -08:00
Linus Torvalds c9d35ee049 Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
 "Saner fs_parser.c guts and data structures. The system-wide registry
  of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
  the horror switch() in fs_parse() that would have to grow another case
  every time something got added to that system-wide registry.

  New syntax types can be added by filesystems easily now, and their
  namespace is that of functions - not of system-wide enum members. IOW,
  they can be shared or kept private and if some turn out to be widely
  useful, we can make them common library helpers, etc., without having
  to do anything whatsoever to fs_parse() itself.

  And we already get that kind of requests - the thing that finally
  pushed me into doing that was "oh, and let's add one for timeouts -
  things like 15s or 2h". If some filesystem really wants that, let them
  do it. Without somebody having to play gatekeeper for the variants
  blessed by direct support in fs_parse(), TYVM.

  Quite a bit of boilerplate is gone. And IMO the data structures make a
  lot more sense now. -200LoC, while we are at it"

* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
  tmpfs: switch to use of invalfc()
  cgroup1: switch to use of errorfc() et.al.
  procfs: switch to use of invalfc()
  hugetlbfs: switch to use of invalfc()
  cramfs: switch to use of errofc() et.al.
  gfs2: switch to use of errorfc() et.al.
  fuse: switch to use errorfc() et.al.
  ceph: use errorfc() and friends instead of spelling the prefix out
  prefix-handling analogues of errorf() and friends
  turn fs_param_is_... into functions
  fs_parse: handle optional arguments sanely
  fs_parse: fold fs_parameter_desc/fs_parameter_spec
  fs_parser: remove fs_parameter_description name field
  add prefix to fs_context->log
  ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
  new primitive: __fs_parse()
  switch rbd and libceph to p_log-based primitives
  struct p_log, variants of warnf() et.al. taking that one instead
  teach logfc() to handle prefices, give it saner calling conventions
  get rid of cg_invalf()
  ...
2020-02-08 13:26:41 -08:00
Al Viro d7167b1499 fs_parse: fold fs_parameter_desc/fs_parameter_spec
The former contains nothing but a pointer to an array of the latter...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:37 -05:00
David Hildenbrand 9291799884 mm/memory_hotplug: drop valid_start/valid_end from test_pages_in_a_zone()
The callers are only interested in the actual zone, they don't care about
boundaries.  Return the zone instead to simplify.

Link: http://lkml.kernel.org/r/20200110183308.11849-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:23 +00:00
Linus Torvalds cf3c8f84d1 More power manadement updates for 5.6-rc1
Prevent cpufreq from creating excessively large stack frames and fix
 the handling of devices deleted during system-wide resume in the PM
 core (Rafael Wysocki), revert a problematic commit affecting the
 cpupower utility and correct its man page (Thomas Renninger,
 Brahadambal Srinivasan), and improve the intel_pstate_tracer
 utility (Doug Smythies).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4z9xsSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxRDYQAJKGKxja7SWIeEMNAVb7ji9VM9qLFmDc
 sqDqUbqjB3Po2t/1RVN/7W1GUxA5cmvbd2gW3dNLddDd1HgM5LH+fzQSRCtxI10x
 Hw3sk1IoKBcH/wCJdBm8JJLDu5A8nU+bTWX1rLjz/qRu2AomLxlNzNQ0ocPfIHKX
 5ZQbtJRqMHan6tx9SAbrE5BA4WP6UrZ2lzQmKLFk7pBynV4wTAaUmixxc8FqA0Lv
 Dm+IIubi0X31CtcrcO8/jgsduLYJpRqJ0P/xievlph38I6nUZ0KrI/gGcHYRg/3y
 1jOtwvpQ+YZ15jXgBCjjB/w5acIzo5apcyOmsn5+wi/sGD5q5vjJs9+sQp98sjdC
 IdRLO8ooIGPptbS/juGZMcaF8YsqCMVlPcE0ybSAqyV82v6ozlFo2NgXXkIGrXiq
 682mx84jpWtpoFR4roDkGGS1/kZvH0cuKu0K48F//h+Sh+GLmsS0JUFdjEAfBGnh
 OEGsZmcuYf+VKGqQuXbWHe/xS4TbRAJ/SnEOX0Tqu4SPsIn2X7DvHfhOSzs5izrI
 euhjSNkRWgkABOIFvAtf0G8UFdRxNAU9+mBTjto3kPjaRwy+yGbVuhJPn0elng2h
 y4impgtyQ9dWPpSfnAX84F4qH2q3MLpskDTEbxovS7mCMsVxR6pvApzKLIfGhdfD
 cuk/ooyTuQG/
 =ctQq
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power manadement updates from Rafael Wysocki:
 "Prevent cpufreq from creating excessively large stack frames and fix
  the handling of devices deleted during system-wide resume in the PM
  core (Rafael Wysocki), revert a problematic commit affecting the
  cpupower utility and correct its man page (Thomas Renninger,
  Brahadambal Srinivasan), and improve the intel_pstate_tracer utility
  (Doug Smythies)"

* tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis
  tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility
  Correction to manpage of cpupower
  cpufreq: Avoid creating excessively large stack frames
  PM: core: Fix handling of devices deleted during system-wide resume
  cpupower: Revert library ABI changes from commit ae2917093f
2020-01-31 14:36:35 -08:00
David Hildenbrand bd5c2344f9 mm/memory_hotplug: pass in nid to online_pages()
Patch series "mm/memory_hotplug: pass in nid to online_pages()".

Simplify onlining code and get rid of find_memory_block().  Pass in the
nid from the memory block we are trying to online directly, instead of
manually looking it up.

This patch (of 2):

No need to lookup the memory block, we can directly pass in the nid.

Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:39 -08:00
David Hildenbrand 3f9903b9ca mm: remove the memory isolate notifier
Luckily, we have no users left, so we can get rid of it.  Cleanup
set_migratetype_isolate() a little bit.

Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qian Cai <cai@lca.pw>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:38 -08:00
Rafael J. Wysocki 82b2c6ffd3 Merge branches 'pm-cpufreq' and 'pm-core'
* pm-cpufreq:
  cpufreq: Avoid creating excessively large stack frames

* pm-core:
  PM: core: Fix handling of devices deleted during system-wide resume
2020-01-31 10:28:23 +01:00
Linus Torvalds 33c84e89ab SCSI misc on 20200129
This series is slightly unusual because it includes Arnd's compat
 ioctl tree here:
 
 1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
 
 Excluding Arnd's changes, this is mostly an update of the usual
 drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.  There
 are a couple of core and base updates around error propagation and
 atomicity in the attribute container base we use for the SCSI
 transport classes.  The rest is minor changes and updates.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
 iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
 01XYTd3p1VHuegIBHlk=
 =Cn52
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series is slightly unusual because it includes Arnd's compat
  ioctl tree here:

    1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue

  Excluding Arnd's changes, this is mostly an update of the usual
  drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.

  There are a couple of core and base updates around error propagation
  and atomicity in the attribute container base we use for the SCSI
  transport classes.

  The rest is minor changes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
  scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
  scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
  scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
  scsi: hisi_sas: Replace magic number when handle channel interrupt
  scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
  scsi: hisi_sas: use threaded irq to process CQ interrupts
  scsi: ufs: Use UFS device indicated maximum LU number
  scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  scsi: ufs: Inline two functions into their callers
  scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
  scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  scsi: ufs: Delete struct ufs_dev_desc
  scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  scsi: ufs-mediatek: enable low-power mode for hibern8 state
  scsi: ufs: export some functions for vendor usage
  scsi: ufs-mediatek: add dbg_register_dump implementation
  scsi: qla2xxx: Fix a NULL pointer dereference in an error path
  scsi: qla1280: Make checking for 64bit support consistent
  scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
  ...
2020-01-29 18:16:16 -08:00
Linus Torvalds 08a3ef8f6b linux-kselftest-5.6-rc1-kunit
This kunit update for Linux 5.6-rc1 consists of:
 
 -- Support for building kunit as a module from Alan Maguire
 -- AppArmor KUnit tests for policy unpack from Mike Salvatore
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl4xz/wACgkQCwJExA0N
 Qxyg2A//X0bnhN82oCchkTRW3GyGi5wTR2wGhoNzMZD0XUtCvn+4BlCSP20ttYdT
 beiLCiewcuEdvXRyEV9Kikvet/67ovbjA/ce6ZrR7TlIHo8esKcy19/nu1OTvtI1
 8eji1q7NSEV9iswz1ZoBAw+MTDHZfOI9qYY2UPcwjy7xWN84z2X1w+8UQ3EamOKd
 6BfbohsYuuTTHhA2k1aUzvQcHqNz0YdH4yvNQpdunJXLUI04TeGZA6Ug66u6kWEd
 1f5SSAu6r1vnU7DADrb1QwEDuIwL4KBuaMg2Rj5GLxTNp3wxmW9M2Dit+iN7+vNH
 TS31kZW6KgxC5XuGVPENJaWlDX5Hm+5W8uiRZLNXsxDy927u53RzwrSZw/FbdbB1
 HuPZZCzE1soWHdPIQz44HCCAg9XddypYlC1o4IYL1JkJknqG12ky4xgM8GRNCZAB
 oUW3Ax3Lcr0EJALO/kFd/uEbl79PdmDk8uPMU1jtLyx5cs70yC3fsT2GB+DbP802
 i/FxTtrOMGjU2OWcYfQcXapvZdgImf9nPsSZe3FJXjHfytNRbVZOZ2rHAMh03Keu
 EBthDs6ejm6OUSGUXjngE9NaQKXsNSQ1Qor+6FrGnT4IxUMzWenudqHH7/dgF7Fr
 fHlZGBilKMc/EYKb/6hj4kvEChrSIXj6TFknmI28I/epPiOr2gU=
 =AFO4
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest kunit updates from Shuah Khan:
 "This kunit update consists of:

   - Support for building kunit as a module from Alan Maguire

   - AppArmor KUnit tests for policy unpack from Mike Salvatore"

* tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: building kunit as a module breaks allmodconfig
  kunit: update documentation to describe module-based build
  kunit: allow kunit to be loaded as a module
  kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds
  kunit: allow kunit tests to be loaded as a module
  kunit: hide unexported try-catch interface in try-catch-impl.h
  kunit: move string-stream.h to lib/kunit
  apparmor: add AppArmor KUnit tests for policy unpack
2020-01-29 15:25:34 -08:00
Linus Torvalds 975f9ce9a0 Driver core changes for 5.6-rc1
Here is a small set of changes for 5.6-rc1 for the driver core and some
 firmware subsystem changes.
 
 Included in here are:
 	- device.h splitup like you asked for months ago
 	- devtmpfs minor cleanups
 	- firmware core minor changes
 	- debugfs fix for lockdown mode
 	- kernfs cleanup fix
 	- cpu topology minor fix
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFL1g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymzfwCgpHAaFeiF1u2XS1pvfySssOUeQ8sAoMXWWgr4
 BHms+ey3TaUnzm38dxk8
 =Xv9r
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small set of changes for 5.6-rc1 for the driver core and
  some firmware subsystem changes.

  Included in here are:
   - device.h splitup like you asked for months ago
   - devtmpfs minor cleanups
   - firmware core minor changes
   - debugfs fix for lockdown mode
   - kernfs cleanup fix
   - cpu topology minor fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (22 commits)
  firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
  devtmpfs: factor out common tail of devtmpfs_{create,delete}_node
  devtmpfs: initify a bit
  devtmpfs: simplify initialization of mount_dev
  devtmpfs: factor out setup part of devtmpfsd()
  devtmpfs: fix theoretical stale pointer deref in devtmpfsd()
  driver core: platform: fix u32 greater or equal to zero comparison
  cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree
  debugfs: Return -EPERM when locked down
  driver core: Print device when resources present in really_probe()
  driver core: Fix test_async_driver_probe if NUMA is disabled
  driver core: platform: Prevent resouce overflow from causing infinite loops
  fs/kernfs/dir.c: Clean code by removing always true condition
  component: do not dereference opaque pointer in debugfs
  drivers/component: remove modular code
  debugfs: Fix warnings when building documentation
  device.h: move 'struct driver' stuff out to device/driver.h
  device.h: move 'struct class' stuff out to device/class.h
  device.h: move 'struct bus' stuff out to device/bus.h
  device.h: move dev_printk()-like functions to dev_printk.h
  ...
2020-01-29 10:18:20 -08:00
Linus Torvalds 85c009e8e5 Device properties framework updates for 5.6-rc1
Add support for reference properties in sofrware nodes (Dmitry
 Torokhov) and a basic test for property entries along with fixes
 on top of it (Dmitry Torokhov, Qian Cai, Alan Maguire).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u21kSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxpFQP/j/TYgzdC3PVWDTzbjOC2W8UStAfjG9M
 DMdCM6vnAmtS+npuO1/4hx4SM8OXVrJSbccpUik1LatfWhKftpAznNssDnnqV475
 ldUdObEHf7g/K6rGkbzELU5SknqHSGs+Gk9PfgV6ahjKy9jgq3jSaSkazVho2OwS
 nIWWnRXeyvJ8TZr+0WjhZGgrLxl1XvDJfqrcckbjluiCx0sxIDfMdq3xgavvvt4J
 qbm/8LFr46WR2fb+78EjaCwfLKZ3i8vLJDLDEf5A6UW3o9h9Xyk0avXB5ECqElrf
 AYqH5GkWThePwHZsezCVyh0MTu6C4TlEOaLFLVuAh3lLEZZ6dmHwpLeqotVhIIQG
 nERXyJNvAJ2PShJQExX67XMhaCvzX8897vMsMQgWTzBztt5aLx4JiMu+pKoxt+I8
 FvyHOhiwFP4pEp6OuJX9oxV8fVTPKU3jaLprZfce41+33yQP+jHg5zeLgpsgvvKY
 SmnxuG3I8R9yXN/AETikerddQwQxw/cc4B9va17XsaEtf6SBEzJPIqbo9cAT6AZs
 +vSr4uEHBB0Wlyrlo75XEKRfCs2f67r1IWr7pfACrHadiSowNNGEFan+tPIIelLU
 n8wgKfIEYyrjyLppZsMWGQLOkzshNZHqdPQUWpb6ywJ1qUWriZXSlh2jviex9G2m
 3wrYBGL5M+o6
 =wnoj
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "Add support for reference properties in sofrware nodes (Dmitry
  Torokhov) and a basic test for property entries along with fixes on
  top of it (Dmitry Torokhov, Qian Cai, Alan Maguire)"

* tag 'devprop-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: introduce CONFIG_KUNIT_DRIVER_PE_TEST
  usb: dwc3: use proper initializers for property entries
  drivers/base/test: fix global-out-of-bounds error
  software node: add basic tests for property entries
  software node: remove separate handling of references
  platform/x86: intel_cht_int33fe: use inline reference properties
  software node: implement reference properties
  software node: allow embedding of small arrays into property_entry
  software node: replace is_array with is_inline
2020-01-27 11:57:40 -08:00
Linus Torvalds 6d277aca48 Power management updates for 5.6-rc1
- Update the ACPI processor driver in order to export
    acpi_processor_evaluate_cst() to the code outside of it, add
    ACPI support to the intel_idle driver based on that and clean
    up that driver somewhat (Rafael Wysocki).
 
  - Add an admin guide document for the intel_idle driver (Rafael
    Wysocki).
 
  - Clean up cpuidle core and drivers, enable compilation testing
    for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
    Wysocki, Yangtao Li).
 
  - Fix reference counting of OPP (operating performance points) table
    structures (Viresh Kumar).
 
  - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
    Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
    YueHaibing).
 
  - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
    power capping driver (Zhang Rui).
 
  - Update cpufreq drivers:
 
    * Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
 
    * Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
 
    * Fix cpufreq policy reference counting issues in s3c and
      brcmstb-avs (chenqiwu).
 
    * Fix ACPI table reference counting issue and HiSilicon quirk
      handling in the CPPC driver (Hanjun Guo).
 
    * Clean up spelling mistake in intel_pstate (Harry Pan).
 
    * Convert the kirkwood and tegra186 drivers to using
      devm_platform_ioremap_resource() (Yangtao Li).
 
  - Update devfreq core:
 
    * Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
 
    * Clean up the handing of transition statistics and allow them
      to be reset by writing 0 to the 'trans_stat' devfreq device
      attribute in sysfs (Kamil Konieczny).
 
    * Add 'devfreq_summary' to debugfs (Chanwoo Choi).
 
    * Clean up kerneldoc comments and Kconfig indentation (Krzysztof
      Kozlowski, Randy Dunlap).
 
  - Update devfreq drivers:
 
    * Add dynamic scaling for the imx8m DDR controller and clean up
      imx8m-ddrc (Leonard Crestez, YueHaibing).
 
    * Fix DT node reference counting and nitialization error code path
      in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
      for it (Chanwoo Choi, Yangtao Li).
 
    * Fix DT node reference counting in rockchip-dfi and make it use
      devm_platform_ioremap_resource() (Yangtao Li).
 
    * Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
 
    * Fix initialization error code paths in exynos-bus (Yangtao Li).
 
    * Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
      Kozlowski).
 
  - Add tracepoints for tracking usage_count updates unrelated to
    status changes in PM-runtime (Michał Mirosław).
 
  - Add sysfs attribute to control the "sync on suspend" behavior
    during system-wide suspend (Jonas Meurer).
 
  - Switch system-wide suspend tests over to 64-bit time (Alexandre
    Belloni).
 
  - Make wakeup sources statistics in debugfs cover deleted ones which
    used to be the case some time ago (zhuguangqing).
 
  - Clean up computations carried out during hibernation, update
    messages related to hibernation and fix a spelling mistake in one
    of them (Wen Yang, Luigi Semenzato, Colin Ian King).
 
  - Add mailmap entry for maintainer e-mail address that has not been
    functional for several years (Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl4u2fESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxvlkP/j5vDzyNUNJjnD6+897c8W+z5dwdiQfU
 QNtoopFXgw/fpOhGXRdj2mA4e6RtpU9aCCiHR6/qdh3/1qSnR5Y9R/51/gmdkwhY
 YakSxmgpgGrOJru94ApI1o/35eWwN/GxjajbfNY5ScrPQl/L0DF3iJWRsAOR5534
 p9e2gQqKecoE+MEn5JcGAXApA5xBLXuUmtWPUn5UGyhaz+jdmsf1zkDEOEvxREay
 hLGH1y6BY8HS/jytyNzISs9iDeBvg2fHmG8SskDiXVMke5sHBTU9MilgpnCFfQ0l
 OF/eNnTXTU7mAJhlnjBUt2rIe5peGSuhgg+Ur7s86xYqbj2SfsVM4UHjU0A6t9Jm
 sauWQh/Nbzw6XaCNzYKxP+dREAg0g/aq7xFqQi3bWx7YvzLk/hvNWi2+bv3adzx7
 Z3fvOki4xMXzLLrh0f1ipC8BKTsdioDZPAy06B80a0luv6ROdr6bPL7did14mWt2
 eCuPuZyXKhdV+PkjZHF+c4XT7N9NfGtE0WUQf54Q4VT00hDagGDliwXpm4ht1pjJ
 iO7uUJevXKSxMaV2xPZ+nWZaOeCVrMMTA1Ec1ELgC1n8WROZJ+SfhehgMQGp7BHS
 Hz4QO1HjTsCDnT+OU7JFeCRrkyXIlh75MOndWOOH6eTEXCAI9PihstB+UGXeNsK0
 BesNQz1sYY1O
 =g48u
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add ACPI support to the intel_idle driver along with an admin
  guide document for it, add support for CPR (Core Power Reduction) to
  the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support
  in a few places, add some new sysfs attributes, debugfs files and
  tracepoints, fix bugs and clean up a bunch of things all over.

  Specifics:

   - Update the ACPI processor driver in order to export
     acpi_processor_evaluate_cst() to the code outside of it, add ACPI
     support to the intel_idle driver based on that and clean up that
     driver somewhat (Rafael Wysocki).

   - Add an admin guide document for the intel_idle driver (Rafael
     Wysocki).

   - Clean up cpuidle core and drivers, enable compilation testing for
     some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
     Wysocki, Yangtao Li).

   - Fix reference counting of OPP (operating performance points) table
     structures (Viresh Kumar).

   - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
     Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
     YueHaibing).

   - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
     power capping driver (Zhang Rui).

   - Update cpufreq drivers:
      - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
      - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
      - Fix cpufreq policy reference counting issues in s3c and
        brcmstb-avs (chenqiwu).
      - Fix ACPI table reference counting issue and HiSilicon quirk
        handling in the CPPC driver (Hanjun Guo).
      - Clean up spelling mistake in intel_pstate (Harry Pan).
      - Convert the kirkwood and tegra186 drivers to using
        devm_platform_ioremap_resource() (Yangtao Li).

   - Update devfreq core:
      - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
      - Clean up the handing of transition statistics and allow them to
        be reset by writing 0 to the 'trans_stat' devfreq device
        attribute in sysfs (Kamil Konieczny).
      - Add 'devfreq_summary' to debugfs (Chanwoo Choi).
      - Clean up kerneldoc comments and Kconfig indentation (Krzysztof
        Kozlowski, Randy Dunlap).

   - Update devfreq drivers:
      - Add dynamic scaling for the imx8m DDR controller and clean up
        imx8m-ddrc (Leonard Crestez, YueHaibing).
      - Fix DT node reference counting and nitialization error code path
        in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
        for it (Chanwoo Choi, Yangtao Li).
      - Fix DT node reference counting in rockchip-dfi and make it use
        devm_platform_ioremap_resource() (Yangtao Li).
      - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
      - Fix initialization error code paths in exynos-bus (Yangtao Li).
      - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
        Kozlowski).

   - Add tracepoints for tracking usage_count updates unrelated to
     status changes in PM-runtime (Michał Mirosław).

   - Add sysfs attribute to control the "sync on suspend" behavior
     during system-wide suspend (Jonas Meurer).

   - Switch system-wide suspend tests over to 64-bit time (Alexandre
     Belloni).

   - Make wakeup sources statistics in debugfs cover deleted ones which
     used to be the case some time ago (zhuguangqing).

   - Clean up computations carried out during hibernation, update
     messages related to hibernation and fix a spelling mistake in one
     of them (Wen Yang, Luigi Semenzato, Colin Ian King).

   - Add mailmap entry for maintainer e-mail address that has not been
     functional for several years (Rafael Wysocki)"

* tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM / devfreq: Add debugfs support with devfreq_summary file
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  PM-runtime: add tracepoints for usage_count changes
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  ...
2020-01-27 11:23:54 -08:00
Rafael J. Wysocki c95d9c140c Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc'
* pm-core:
  PM-runtime: add tracepoints for usage_count changes

* powercap:
  powercap/intel_rapl: add support for JasperLake
  x86/cpu: Add Jasper Lake to Intel family
  powercap/intel_rapl: add support for TigerLake Mobile

* pm-opp:
  opp: Replace list_kref with a local counter
  opp: Free static OPPs on errors while adding them

* pm-avs:
  power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c
  power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call
  power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static
  power: avs: qcom-cpr: remove set but unused variable
  power: avs: qcom-cpr: make sure that regmap is available
  power: avs: qcom-cpr: fix unsigned expression compared with zero
  power: avs: qcom-cpr: fix invalid printk specifier in debug print
  power: avs: Add support for CPR (Core Power Reduction)
  dt-bindings: power: avs: Add support for CPR (Core Power Reduction)

* pm-misc:
  mailmap: Add entry for <rjw@sisk.pl>
2020-01-27 11:30:13 +01:00
Rafael J. Wysocki 245224d1cb Merge branches 'pm-cpufreq' and 'pm-sleep'
* pm-cpufreq:
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  cpufreq: s3c: fix unbalances of cpufreq policy refcount
  cpufreq: imx-cpufreq-dt: Add i.MX8MP support
  cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
  cpufreq: tegra186: convert to devm_platform_ioremap_resource
  cpufreq: kirkwood: convert to devm_platform_ioremap_resource
  cpufreq: CPPC: put ACPI table after using it
  cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched

* pm-sleep:
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  PM: hibernate: Add more logging on hibernation failure
  PM: hibernate: improve arithmetic division in preallocate_highmem_fraction()
  PM: wakeup: Show statistics for deleted wakeup sources again
  PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()
2020-01-27 11:29:09 +01:00
Rafael J. Wysocki 0552e05fdf PM: core: Fix handling of devices deleted during system-wide resume
If a device is deleted by one of its system-wide resume callbacks
(for example, because it does not appear to be present or accessible
any more) along with its children, the resume of the children may
continue leading to use-after-free errors and other issues
(potentially).

Namely, if the device's children are resumed asynchronously, their
resume may have been scheduled already before the device's callback
runs and so the device may be deleted while dpm_wait_for_superior()
is being executed for them.  The memory taken up by the parent device
object may be freed then while dpm_wait() is waiting for the parent's
resume callback to complete, which leads to a use-after-free.
Moreover, the resume of the children is really not expected to
continue after they have been unregistered, so it must be terminated
right away in that case.

To address this problem, modify dpm_wait_for_superior() to check
if the target device is still there in the system-wide PM list of
devices and if so, to increment its parent's reference counter, both
under dpm_list_mtx which prevents device_del() running for the child
from dropping the parent's reference counter prematurely.

If the device is not present in the system-wide PM list of devices
any more, the resume of it cannot continue, so check that again after
dpm_wait() returns, which means that the parent's callback has been
completed, and pass the result of that check to the caller of
dpm_wait_for_superior() to allow it to abort the device's resume
if it is not there any more.

Link: https://lore.kernel.org/linux-pm/1579568452-27253-1-git-send-email-chanho.min@lge.com
Reported-by: Chanho Min <chanho.min@lge.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-24 14:27:05 +01:00
Hans de Goede 85db1cde82 firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
This is a preparation patch for adding a new platform fallback mechanism,
which will have its own enable/disable FW_OPT_xxx option.

Note this also fixes a typo in one of the re-wordwrapped comments:
enfoce -> enforce.

Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-24 09:56:58 +01:00
Rasmus Villemoes 72a9cc952f devtmpfs: factor out common tail of devtmpfs_{create,delete}_node
There's some common boilerplate in devtmpfs_{create,delete}_node, put
that in a little helper.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20200115184154.3492-6-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22 15:28:15 +01:00
Rasmus Villemoes fad1db8a35 devtmpfs: initify a bit
devtmpfs_mount() is only called from prepare_namespace() in
init/do_mounts.c, which is an __init function, so devtmpfs_mount() can
also be moved to .init.text.

Then the mount_dev static variable is only referenced from __init
functions (devtmpfs_mount and its initializer function mount_param).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20200115184154.3492-5-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22 15:28:15 +01:00
Rasmus Villemoes 21766d11d1 devtmpfs: simplify initialization of mount_dev
Avoid a bit of ifdeffery by using the IS_ENABLED() helper.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20200115184154.3492-4-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22 15:28:15 +01:00
Rasmus Villemoes 0ff0e95e99 devtmpfs: factor out setup part of devtmpfsd()
Factor out the setup part of devtmpfsd() to make it a bit easier to
see that we always call setup_done() exactly once (provided of course
the kthread is succesfully created).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20200115184154.3492-3-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22 15:28:14 +01:00
Rasmus Villemoes c9d6b287d7 devtmpfs: fix theoretical stale pointer deref in devtmpfsd()
After complete(&setup_done), devtmpfs_init proceeds and may actually
return, invalidating the *err pointer, before devtmpfsd() proceeds to
reading back *err.

This is of course completely theoretical since the error conditions
never trigger in practice, and even if they did, nobody cares about
the exit value from a kernel thread, so it doesn't matter if we happen
to read back some garbage from some other stack frame. Still, this
isn't a pattern that should be copy-pasted, so fix it.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20200115184154.3492-2-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22 15:28:14 +01:00
Colin Ian King 0707cfa5c3 driver core: platform: fix u32 greater or equal to zero comparison
Currently the check that a u32 variable i is >= 0 is always true because
the unsigned variable will never be negative, causing the loop to run
forever.  Fix this by changing the pre-decrement check to a zero check on
i followed by a decrement of i.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 39cc539f90 ("driver core: platform: Prevent resouce overflow from causing infinite loops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200116175758.88396-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-22 15:27:11 +01:00
Mark Brown ea87683909
Merge branch 'regmap-5.6' into regmap-next 2020-01-21 17:29:48 +00:00
Ben Whitten 2e31aab08b
regmap: fix writes to non incrementing registers
When checking if a register block is writable we must ensure that the
block does not start with or contain a non incrementing register.

Fixes: 8b9f9d4dc5 ("regmap: verify if register is writeable before writing operations")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-21 17:16:26 +00:00
Zeng Tao f3c1948182 cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree
When the kernel is configured with CONFIG_NR_CPUS smaller than the
number of CPU nodes in the device tree(DT), all the CPU nodes parsing
done to fetch topology information will fail. This is not reasonable
as it is legal to have all the physical CPUs in the system in the DT.

Let us just skip such CPU DT nodes that are not used in the kernel
rather than returning an error.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1579225973-32423-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17 15:21:49 +01:00
Alan Maguire aa811e3cec software node: introduce CONFIG_KUNIT_DRIVER_PE_TEST
Currently the property entry kunit tests are built if CONFIG_KUNIT=y.
This will cause warnings when merged with the kunit tree that now
supports tristate CONFIG_KUNIT.  While the tests appear to compile
as a module, we get a warning about missing module license.

It's better to have a per-test suite CONFIG variable so that
we can do selective building of kunit-based suites, and can
also avoid merge issues like this.

Fixes: c032ace71c ("software node: add basic tests for property entries")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-17 00:23:37 +01:00
Gabriel Krisman Bertazi cd7ea70bb0 scsi: drivers: base: Propagate errors through the transport component
The transport registration may fail.  Make sure the errors are propagated
to the callers.

Link: https://lore.kernel.org/r/20200106185817.640331-3-krisman@collabora.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15 22:55:37 -05:00
Gabriel Krisman Bertazi 7c1ef33870 scsi: drivers: base: Support atomic version of attribute_container_device_trigger
attribute_container_device_trigger invokes callbacks that may fail for one
or more classdevs, for instance, the transport_add_class_device callback,
called during transport creation, does memory allocation.  This
information, though, is not propagated to upper layers, and any driver
using the attribute_container_device_trigger API will not know whether any,
some, or all callbacks succeeded.

This patch implements a safe version of this dispatcher, to either succeed
all the callbacks or revert to the original state.

Link: https://lore.kernel.org/r/20200106185817.640331-2-krisman@collabora.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15 22:55:36 -05:00
Jari Ruusu f5ae2ea634 Fix built-in early-load Intel microcode alignment
Intel Software Developer's Manual, volume 3, chapter 9.11.6 says:

 "Note that the microcode update must be aligned on a 16-byte boundary
  and the size of the microcode update must be 1-KByte granular"

When early-load Intel microcode is loaded from initramfs, userspace tool
'iucode_tool' has already 16-byte aligned those microcode bits in that
initramfs image.  Image that was created something like this:

 iucode_tool --write-earlyfw=FOO.cpio microcode-files...

However, when early-load Intel microcode is loaded from built-in
firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that
16-byte alignment is not guaranteed.

Fix this by forcing all built-in firmware BLOBs to 16-byte alignment.

[ If we end up having other firmware with much bigger alignment
  requirements, we might need to introduce some method for the firmware
  to specify it, this is the minimal "just increase the alignment a bit
  to account for this one special case" patch    - Linus ]

Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-15 11:50:37 -08:00
Geert Uytterhoeven 7c35e699c8 driver core: Print device when resources present in really_probe()
If a device already has devres items attached before probing, a warning
backtrace is printed.  However, this backtrace does not reveal the
offending device, leaving the user uninformed.  Furthermore, using
WARN_ON() causes systems with panic-on-warn to reboot.

Fix this by replacing the WARN_ON() by a dev_crit() message.
Abort probing the device, to prevent doing more damage to the device's
resources.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 16:14:48 +01:00
Guenter Roeck 264d25275a driver core: Fix test_async_driver_probe if NUMA is disabled
Since commit 57ea974fb8 ("driver core: Rewrite test_async_driver_probe
to cover serialization and NUMA affinity"), running the test with NUMA
disabled results in warning messages similar to the following.

test_async_driver test_async_driver.12: NUMA node mismatch -1 != 0

If CONFIG_NUMA=n, dev_to_node(dev) returns -1, and numa_node_id()
returns 0. Both are widely used, so it appears risky to change return
values. Augment the check with IS_ENABLED(CONFIG_NUMA) instead
to fix the problem.

Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20191127202453.28087-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 16:14:47 +01:00
Simon Schwartz 39cc539f90 driver core: platform: Prevent resouce overflow from causing infinite loops
num_resources in the platform_device struct is declared as a u32.  The
for loops that iterate over num_resources use an int as the counter,
which can cause infinite loops on architectures with smaller ints.
Change the loop counters to u32.

Signed-off-by: Simon Schwartz <kern.simon@theschwartz.xyz>
Link: https://lore.kernel.org/r/2201ce63a2a171ffd2ed14e867875316efcf71db.camel@theschwartz.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 16:14:47 +01:00
Lubomir Rintel ef9ffc1e5f component: do not dereference opaque pointer in debugfs
The match data does not have to be a struct device pointer, and indeed
very often is not. Attempt to treat it as such easily results in a
crash.

For the components that are not registered, we don't know which device
is missing. Once it it is there, we can use the struct component to get
the device and whether it's bound or not.

Fixes: 59e73854b5 ('component: add debugfs support')
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@vger.kernel.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20191118115431.63626-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 16:10:14 +01:00
Masahiro Yamada e2f3733207 drivers/component: remove modular code
drivers/base/Makefile always adds component.o to obj-y, like this:

  obj-y                   := component.o core.o bus.o dd.o syscore.o \

Hence it is never compiled as a module. Remove useless modular code.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20191218144307.19243-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 16:10:14 +01:00
Michał Mirosław d229290689 PM-runtime: add tracepoints for usage_count changes
Add tracepoints to remaining places where device's power.usage_count
is changed.

This helps debugging where and why autosuspend is prevented.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13 12:28:29 +01:00
Alan Maguire 35c57fc3f8 kunit: building kunit as a module breaks allmodconfig
kunit tests that do not support module build should depend
on KUNIT=y rather than just KUNIT in Kconfig, otherwise
they will trigger compilation errors for "make allmodconfig"
builds.

Fixes: 9fe124bf1b ("kunit: allow kunit to be loaded as a module")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-10 14:36:37 -07:00
Alan Maguire c475c77d5b kunit: allow kunit tests to be loaded as a module
As tests are added to kunit, it will become less feasible to execute
all built tests together.  By supporting modular tests we provide
a simple way to do selective execution on a running system; specifying

CONFIG_KUNIT=y
CONFIG_KUNIT_EXAMPLE_TEST=m

...means we can simply "insmod example-test.ko" to run the tests.

To achieve this we need to do the following:

o export the required symbols in kunit
o string-stream tests utilize non-exported symbols so for now we skip
  building them when CONFIG_KUNIT_TEST=m.
o drivers/base/power/qos-test.c contains a few unexported interface
  references, namely freq_qos_read_value() and freq_constraints_init().
  Both of these could be potentially defined as static inline functions
  in include/linux/pm_qos.h, but for now we simply avoid supporting
  module build for that test suite.
o support a new way of declaring test suites.  Because a module cannot
  do multiple late_initcall()s, we provide a kunit_test_suites() macro
  to declare multiple suites within the same module at once.
o some test module names would have been too general ("test-test"
  and "example-test" for kunit tests, "inode-test" for ext4 tests);
  rename these as appropriate ("kunit-test", "kunit-example-test"
  and "ext4-inode-test" respectively).

Also define kunit_test_suite() via kunit_test_suites()
as callers in other trees may need the old definition.

Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 bits
Acked-by: David Gow <davidgow@google.com> # For list-test
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-09 16:42:29 -07:00
Qian Cai eabd5e7d8b drivers/base/test: fix global-out-of-bounds error
Commit c032ace71c ("software node: add basic tests for property
entries") introduced a global-out-of-bounds error because it forgot to
add a terminator of "nodes "for software_node_register_nodes() to
process.

 	# Subtest: property-entry
 	1..7
 	ok 1 - pe_test_uints
 	ok 2 - pe_test_uint_arrays
 	ok 3 - pe_test_strings
 	ok 4 - pe_test_bool
 	ok 5 - pe_test_move_inline_u8
 	ok 6 - pe_test_move_inline_str
 ==================================================================
 BUG: KASAN: global-out-of-bounds in
 software_node_register_nodes+0x41/0x80
 Read of size 8 at addr ffffffff989ef250 by task kunit_try_catch/316

 CPU: 17 PID: 316 Comm: kunit_try_catch Not tainted
 5.5.0-rc4-next-20200106+ #1
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40
 03/09/2018
 Call Trace:
  dump_stack+0xa0/0xea
  print_address_description.constprop.5.cold.7+0x64/0x384
  __kasan_report.cold.8+0x7a/0xc0
  kasan_report+0x12/0x20
  __asan_load8+0x71/0xa0
  software_node_register_nodes+0x41/0x80
  pe_test_reference+0x1eb/0x1200
  kunit_try_run_case+0x6b/0xd1
  kunit_generic_run_threadfn_adapter+0x29/0x50
  kthread+0x1e6/0x210
  ret_from_fork+0x27/0x50

 The buggy address belongs to the variable:
  nodes.21544+0x30/0x920

 Memory state around the buggy address:
  ffffffff989ef100: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 00 00
  ffffffff989ef180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffffffff989ef200: fa fa fa fa 00 00 00 00 00 00 fa fa fa fa fa fa
                                                  ^
  ffffffff989ef280: 00 06 fa fa fa fa fa fa 00 00 04 fa fa fa fa fa
  ffffffff989ef300: 00 00 fa fa fa fa fa fa 00 05 fa fa fa fa fa fa
 ==================================================================
 Disabling lock debugging due to kernel taint
 	ok 7 - pe_test_reference
 ok 8 - property-entry

Fixes: c032ace71c ("software node: add basic tests for property entries")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-07 11:41:04 +01:00
Michał Mirosław 14e01b5f33
regmap-i2c: constify regmap_bus structures
regmap_bus structures are not changed anywhere. Mark them const.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/85e4141348db00ecf1f2bc5c2ff6ba3de75e8ff4.1578134920.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-06 20:46:44 +00:00
Ulf Hansson dedd14925e PM / Domains: Introduce a genpd OF helper that removes a subdomain
We already have the of_genpd_add_subdomain() helper, but no corresponding
of_genpd_remove_subdomain(), so let's add it. Subsequent changes starts to
make use of it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02 16:52:40 +01:00
zhuguangqing e976eb4b91 PM: wakeup: Show statistics for deleted wakeup sources again
After commit 00ee22c289 (PM / wakeup: Use seq_open() to show wakeup
stats), print_wakeup_source_stats(m, &deleted_ws) is not called from
wakeup_sources_stats_seq_show() any more.

Because deleted_ws is one of the wakeup sources, it should be shown
too, so add it to the end of all other wakeup sources.

Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20 10:02:38 +01:00
Dmitry Torokhov c032ace71c software node: add basic tests for property entries
This adds tests for creating software nodes with properties supplied by
PROPERTY_ENTRY_XXX() macros and fetching and validating data from said
nodes/properties.

We are using KUnit framework for the tests.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-19 18:14:34 +01:00
Greg Kroah-Hartman 4c002c978b device.h: move 'struct driver' stuff out to device/driver.h
device.h has everything and the kitchen sink when it comes to struct
device things, so split out the struct driver things things to a
separate .h file to make things easier to maintain and manage over time.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191209193303.1694546-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-16 10:11:16 +01:00
Greg Kroah-Hartman a8ae608529 device.h: move 'struct class' stuff out to device/class.h
device.h has everything and the kitchen sink when it comes to struct
device things, so split out the struct class things things to a separate
.h file to make things easier to maintain and manage over time.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191209193303.1694546-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-16 10:11:14 +01:00
Greg Kroah-Hartman 5aee2bf262 device.h: move 'struct bus' stuff out to device/bus.h
device.h has everything and the kitchen sink when it comes to struct
device things, so split out the struct bus things things to a separate
.h file to make things easier to maintain and manage over time.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191209193303.1694546-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-16 10:11:12 +01:00
Greg Kroah-Hartman cf901a1c5d device.h: move devtmpfs prototypes out of the file
The devtmpfs functions do not need to be in device.h as only the driver
core uses them, so move them to the private .h file for the driver core.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191209193303.1694546-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-16 10:10:18 +01:00
Greg Kroah-Hartman 94e14da890 Merge 5.5-rc2 into driver-core-next
We need the driver core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-16 09:08:51 +01:00
Linus Torvalds 2e6d304515 Merge branch 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
 "This small series replaces all in-kernel calls to the
  userspace-focused ksys_mount() and ksys_dup() with calls to
  kernel-centric functions:

  For each replacement of ksys_mount() with do_mount(), one needs to
  verify that the first and third parameter (char *dev_name, char *type)
  are strings allocated in kernelspace and that the fifth parameter
  (void *data) is either NULL or refers to a full page (only occurence
  in init/do_mounts.c::do_mount_root()). The second and fourth
  parameters (char *dir_name, unsigned long flags) are passed by
  ksys_mount() to do_mount() unchanged, and therefore do not require
  particular care.

  Moreover, instead of pretending to be userspace, the opening of
  /dev/console as stdin/stdout/stderr can be implemented using in-kernel
  functions as well. Thereby, ksys_dup() can be removed for good"

[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
  case, but it at least removes _some_ of the users of "treat kernel
  pointers as user pointers for our magical init sequence".

  One day we'll hopefully be rid of it all, and can initialize our
  init_thread addr_limit to USER_DS.    - Linus ]

* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  fs: remove ksys_dup()
  init: unify opening /dev/console as stdin/stdout/stderr
  init: use do_mount() instead of ksys_mount()
  initrd: use do_mount() instead of ksys_mount()
  devtmpfs: use do_mount() instead of ksys_mount()
2019-12-15 11:36:12 -08:00
Dominik Brodowski 5e787dbf65 devtmpfs: use do_mount() instead of ksys_mount()
In devtmpfs, do_mount() can be called directly instead of complex wrapping
by ksys_mount():
- the first and third arguments are const strings in the kernel,
  and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be
  copied over from userspace;
- the second and fourth argument are passed through anyway.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12 14:49:57 +01:00