Граф коммитов

340 Коммитов

Автор SHA1 Сообщение Дата
Justin Swartz cec9d101d7 clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.

Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.

Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.

Use the correct gate offset for aclk_gpu and aclk_gpu_noc.

Fixes: 307a2e9ac5 ("clk: rockchip: add clock controller for rk3228")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[double-checked against SoC manual and added fixes tag]
Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-04-13 09:35:24 +02:00
Jerome Brunet d894992502 clk: rockchip: fix mmc get phase
If the mmc clock has no rate, it can be assumed to be constant.
In such case, there is no measurable phase shift. Just return 0
in this case instead of returning an error.

Fixes: 2760878662 ("clk: Bail out when calculating phase fails during clk registration")
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20200303192956.64410-1-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-06 12:06:01 -08:00
Jerome Brunet 89d079dc17 clk: let init callback return an error code
If the init callback is allowed to request resources, it needs a return
value to report the outcome of such a request.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-3-jbrunet@baylibre.com
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-23 18:53:13 -08:00
Heiko Stuebner 3b0b4ebfd7 clk: rockchip: protect the pclk_usb_grf as critical on px30
Make this clock a real critical clock, so that writes to the usbphy grf
always succeed.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20190917081903.25139-5-heiko@sntech.de
2019-11-05 20:53:42 +01:00
Heiko Stuebner 8a88550fe7 clk: rockchip: add video-related niu clocks as critical on px30
Video-In and -Out interconnect clocks need to stay on all the
time for the peripheral to work and we do not model the actual
interconnect at this point. So mark them as critical for now.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20190917081903.25139-4-heiko@sntech.de
2019-11-05 20:53:39 +01:00
Heiko Stuebner 7990660f36 clk: rockchip: move px30 critical clocks to correct clock controller
The clocks in the px30 critical clock section are from the regular cru not
the pmucru, so move them to the correct place.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20190917081903.25139-3-heiko@sntech.de
2019-11-05 20:53:34 +01:00
Finley Xiao e40781098f clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc
Some IPs, such as NAND, EMMC, SDIO and SDMMC need clock of 50%  duty
cycle, divfree50 can generate clock of 50% duty cycle even in odd
value divisor.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20190917081903.25139-2-heiko@sntech.de
2019-11-05 20:53:30 +01:00
Ben Dooks (Codethink) bbbbd246ee clk: rockchip: make clk_half_divider_ops static
The clk_half_divider_ops is not used outside or declared
outside of drivers/clk/rockchip/clk-half-divider.c so make
it static to avoid the following warning:

drivers/clk/rockchip/clk-half-divider.c:142:22: warning: symbol 'clk_half_divider_ops' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20191017105348.8061-1-ben.dooks@codethink.co.uk
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-31 12:06:01 +01:00
Finley Xiao ac68dfd3c4 clk: rockchip: Add clock controller for the rk3308
Add the clock tree definition for the new RK3308 SoC.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-09-05 12:43:39 +02:00
Nathan Huckleberry 7114fbdaa2 clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver
Clang produces the following warning

drivers/clk/rockchip/clk-rv1108.c:125:7: warning: unused variable
'mux_pll_src_3plls_p' [-Wunused-const-variable]
PNAME(mux_pll_src_3plls_p)      = { "apll", "gpll", "dpll" };

Looks like this variable was never used. Deleting it to remove the
warning.

Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/524
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-07-25 21:00:52 +02:00
Linus Torvalds 916f562fb2 This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00
Heiko Stuebner 794e94ca83 clk: rockchip: export HDMIPHY clock on rk3228
Export the hdmiphy clock mux via the newly added clock-id.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>
2019-06-27 11:02:28 +02:00
Heiko Stuebner d59fca075c clk: rockchip: add watchdog pclk on rk3328
The watchdog pclk is controlled from the secure GRF but we still
want to mention it explicitly to not use arbitary parent clocks
in the devicetree wdt node, so add a SGRF_GATE for it.

Suggested-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27 11:02:17 +02:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Heiko Stuebner e4488e45e2 clk: rockchip: convert pclk_wdt boilerplat to new SGRF_GATE macro
Convert the boilerplate code for manual addition of the watchdog clock
to the new SGRF_GATE macro for all affected socs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-15 15:54:24 +02:00
Heiko Stuebner b3b723d8c4 clk: rockchip: add a type from SGRF-controlled gate clocks
Some clk gates on Rockchip SoCs are part of the SGRF (secure general
register files) and thus only controllable from secure mode, with the
most prominent example being the watchdog.

In most cases we still want to define this as a real clock though,
to have complete clock tree and not reference the generic base-clock
from the devicetree.

So far we've just defined this as factor-1-1 clocks in the clock init,
so define a special clock-type for it so that this definition can be
part of the general tree-definition and save some boilerplate code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-14 18:56:07 +02:00
Douglas Anderson 7d2129310b clk: rockchip: Remove 48 MHz PLL rate from rk3288
The 48 MHz PLL rate is not present in the downstream chromeos-3.14
tree.  Looking at history, it was originally removed in
<https://crrev.com/c/265810> ("CHROMIUM: clk: rockchip: expand more
clocks support") with no explanation.  Much of that patch was later
reverted in <https://crrev.com/c/284595> ("CHROMIUM: clk: rockchip:
Revert more questionable PLL rates"), but that patch left in the
removal of 48 MHz.  What I wrote in that patch:

> Note that the original change also removed the rate (48000000, 1,
> 64, 32) from the table.  I have no idea why that was squashed in
> there, but that rate was invalid anyway (it appears to have an out
> of bounds NO).  I'm not putting that rate in.

Reading the TRM I see that NO is defined as
- NO: 1, 2-16 (even only)
...and furthermore only 4 bits are assigned for NO-1, which means that
the highest NO we could even represent is 16.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-06 12:49:30 +02:00
Thomas Gleixner 9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Justin Swartz f14b3c91ec clk: rockchip: add 1.464GHz cpu-clock rate to rk3228
Add missing 1.464GHz clock rate to rk3228_cpuclk_rates[], which gets
referenced in the operating points but wasn't defined till now.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-05-20 01:00:53 +02:00
Douglas Anderson 1e2d08a837 clk: rockchip: Slightly more accurate math in rockchip_mmc_get_phase()
There's a bit of math in rockchip_mmc_get_phase() to calculate the
"fine delay".  This math boils down to:

 PSECS_PER_SEC = 1000000000000.
 ROCKCHIP_MMC_DELAY_ELEMENT_PSEC = 60
 card_clk * ROCKCHIP_MMC_DELAY_ELEMENT_PSEC * 360 * x / PSECS_PER_SEC

...but we do it in pieces to avoid overflowing 32-bits.  Right now we
overdo it a little bit, though, and end up getting less accurate math
than we could.  Right now we do:

 DIV_ROUND_CLOSEST((card_clk / 1000000) *
                   (ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10) *
                   (360 / 10) *
		   delay_num,
		   PSECS_PER_SEC / 1000000 / 10 / 10)

This is non-ideal because:
A) The pins on Rockchip SoCs are rated to go at most 150 MHz, so the
   max card clock is 150 MHz.  Even ignoring this the maximum SD card
   clock (for SDR104) would be 208 MHz.  This means you can decrease
   your division by 100x and still not overflow:
     hex(208000000 / 10000 * 6 * 36 * 0xff) == 0x44497200
B) On many Rockchip SoCs we end up with a card clock that is actually
   148500000 because we parent off the 297 MHz PLL.  That means the
   math we're actually doing today is less than ideal.  Specifically:
   148500000 / 1000000 = 148

Let's fix the math to be slightly more accurate.

NOTE: no known problems are fixed by this.  It was found simply by
code inspection.  If you want to see the difference between the old
and the new on a 148.5 MHz clock, this python can help:

  old = [x for x in
         (int(round(148 * 6 * 36 * x / 10000.)) for x in range(256))
	 if x < 90]
  new = [x for x in
         (int(round(1485 * 6 * 36 * x / 100000.)) for x in range(256))
	 if x < 90]

The only differences are:
  delay_num=17 54=>55
  delay_num=22 70=>71
  delay_num=27 86=>87

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-05-20 01:00:53 +02:00
Douglas Anderson 6943b83972 clk: rockchip: Don't yell about bad mmc phases when getting
At boot time, my rk3288-veyron devices yell with 8 lines that look
like this:
  [    0.000000] rockchip_mmc_get_phase: invalid clk rate

This is because the clock framework at clk_register() time tries to
get the phase but we don't have a parent yet.

While the errors appear to be harmless they are still ugly and, in
general, we don't want yells like this in the log unless they are
important.

There's no real reason to be yelling here.  We can still return
-EINVAL to indicate that the phase makes no sense without a parent.
If someone really tries to do tuning and the clock is reported as 0
then we'll see the yells in rockchip_mmc_set_phase().

Fixes: 4bf59902b5 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-05-20 01:00:52 +02:00
Douglas Anderson 527f54fddf clk: rockchip: Use clk_hw_get_rate() in MMC phase calculation
When calculating the MMC phase we can just use clk_hw_get_rate()
instead of clk_get_rate().  This avoids recalculating the rate.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-05-20 01:00:52 +02:00
Stephen Boyd 62e59c4e69 clk: Remove io.h from clk-provider.h
Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

  git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
  	xargs git grep -l \
	-e '\<__iowrite32_copy\>' --or \
	-e '\<__ioread32_copy\>' --or \
	-e '\<__iowrite64_copy\>' --or \
	-e '\<ioremap_page_range\>' --or \
	-e '\<ioremap_huge_init\>' --or \
	-e '\<arch_ioremap_pud_supported\>' --or \
	-e '\<arch_ioremap_pmd_supported\>' --or \
	-e '\<devm_ioport_map\>' --or \
	-e '\<devm_ioport_unmap\>' --or \
	-e '\<IOMEM_ERR_PTR\>' --or \
	-e '\<devm_ioremap\>' --or \
	-e '\<devm_ioremap_nocache\>' --or \
	-e '\<devm_ioremap_wc\>' --or \
	-e '\<devm_iounmap\>' --or \
	-e '\<devm_ioremap_release\>' --or \
	-e '\<devm_memremap\>' --or \
	-e '\<devm_memunmap\>' --or \
	-e '\<__devm_memremap_pages\>' --or \
	-e '\<pci_remap_cfgspace\>' --or \
	-e '\<arch_has_dev_port\>' --or \
	-e '\<arch_phys_wc_add\>' --or \
	-e '\<arch_phys_wc_del\>' --or \
	-e '\<memremap\>' --or \
	-e '\<memunmap\>' --or \
	-e '\<arch_io_reserve_memtype_wc\>' --or \
	-e '\<arch_io_free_memtype_wc\>' --or \
	-e '\<__io_aw\>' --or \
	-e '\<__io_pbw\>' --or \
	-e '\<__io_paw\>' --or \
	-e '\<__io_pbr\>' --or \
	-e '\<__io_par\>' --or \
	-e '\<__raw_readb\>' --or \
	-e '\<__raw_readw\>' --or \
	-e '\<__raw_readl\>' --or \
	-e '\<__raw_readq\>' --or \
	-e '\<__raw_writeb\>' --or \
	-e '\<__raw_writew\>' --or \
	-e '\<__raw_writel\>' --or \
	-e '\<__raw_writeq\>' --or \
	-e '\<readb\>' --or \
	-e '\<readw\>' --or \
	-e '\<readl\>' --or \
	-e '\<readq\>' --or \
	-e '\<writeb\>' --or \
	-e '\<writew\>' --or \
	-e '\<writel\>' --or \
	-e '\<writeq\>' --or \
	-e '\<readb_relaxed\>' --or \
	-e '\<readw_relaxed\>' --or \
	-e '\<readl_relaxed\>' --or \
	-e '\<readq_relaxed\>' --or \
	-e '\<writeb_relaxed\>' --or \
	-e '\<writew_relaxed\>' --or \
	-e '\<writel_relaxed\>' --or \
	-e '\<writeq_relaxed\>' --or \
	-e '\<readsb\>' --or \
	-e '\<readsw\>' --or \
	-e '\<readsl\>' --or \
	-e '\<readsq\>' --or \
	-e '\<writesb\>' --or \
	-e '\<writesw\>' --or \
	-e '\<writesl\>' --or \
	-e '\<writesq\>' --or \
	-e '\<inb\>' --or \
	-e '\<inw\>' --or \
	-e '\<inl\>' --or \
	-e '\<outb\>' --or \
	-e '\<outw\>' --or \
	-e '\<outl\>' --or \
	-e '\<inb_p\>' --or \
	-e '\<inw_p\>' --or \
	-e '\<inl_p\>' --or \
	-e '\<outb_p\>' --or \
	-e '\<outw_p\>' --or \
	-e '\<outl_p\>' --or \
	-e '\<insb\>' --or \
	-e '\<insw\>' --or \
	-e '\<insl\>' --or \
	-e '\<outsb\>' --or \
	-e '\<outsw\>' --or \
	-e '\<outsl\>' --or \
	-e '\<insb_p\>' --or \
	-e '\<insw_p\>' --or \
	-e '\<insl_p\>' --or \
	-e '\<outsb_p\>' --or \
	-e '\<outsw_p\>' --or \
	-e '\<outsl_p\>' --or \
	-e '\<ioread8\>' --or \
	-e '\<ioread16\>' --or \
	-e '\<ioread32\>' --or \
	-e '\<ioread64\>' --or \
	-e '\<iowrite8\>' --or \
	-e '\<iowrite16\>' --or \
	-e '\<iowrite32\>' --or \
	-e '\<iowrite64\>' --or \
	-e '\<ioread16be\>' --or \
	-e '\<ioread32be\>' --or \
	-e '\<ioread64be\>' --or \
	-e '\<iowrite16be\>' --or \
	-e '\<iowrite32be\>' --or \
	-e '\<iowrite64be\>' --or \
	-e '\<ioread8_rep\>' --or \
	-e '\<ioread16_rep\>' --or \
	-e '\<ioread32_rep\>' --or \
	-e '\<ioread64_rep\>' --or \
	-e '\<iowrite8_rep\>' --or \
	-e '\<iowrite16_rep\>' --or \
	-e '\<iowrite32_rep\>' --or \
	-e '\<iowrite64_rep\>' --or \
	-e '\<__io_virt\>' --or \
	-e '\<pci_iounmap\>' --or \
	-e '\<virt_to_phys\>' --or \
	-e '\<phys_to_virt\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<__ioremap\>' --or \
	-e '\<iounmap\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<ioremap_nocache\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wt\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<xlate_dev_kmem_ptr\>' --or \
	-e '\<xlate_dev_mem_ptr\>' --or \
	-e '\<unxlate_dev_mem_ptr\>' --or \
	-e '\<virt_to_bus\>' --or \
	-e '\<bus_to_virt\>' --or \
	-e '\<memset_io\>' --or \
	-e '\<memcpy_fromio\>' --or \
	-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-15 13:21:37 -07:00
Stephen Boyd 5816b74581 Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-next
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
 - Support for Cirrus Logic Lochnagar clks

* clk-hisi:
  clk: hi3660: Mark clk_gate_ufs_subsys as critical

* clk-lochnagar:
  clk: lochnagar: Add support for the Cirrus Logic Lochnagar
  clk: lochnagar: Add initial binding documentation

* clk-allwinner:
  clk: sunxi-ng: sun5i: Export the MBUS clock
  clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk
  clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate
  clk: sunxi-ng: h6: Preset hdmi-cec clock parent
  clk: sunxi: Add Kconfig options
  clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset
  clk: sunxi-ng: Allow DE clock to set parent rate

* clk-rockchip:
  clk: rockchip: undo several noc and special clocks as critical on rk3288
  clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type
  clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288
  clk: rockchip: Limit use of USB PHY clock to USB on rk3288
  clk: rockchip: Fix video codec clocks on rk3288
  clk: rockchip: Make rkpwm a critical clock on rk3288
  clk: rockchip: fix wrong clock definitions for rk3328

* clk-qoriq:
  clk: qoriq: increase array size of cmux_to_group
  dt-bindings: qoriq-clock: Add ls1028a chip compatible string
  clk: qoriq: Add ls1028a clock configuration
  clk: qoriq: add more PLL divider clocks support
  dt-bindings: qoriq-clock: add more PLL divider clocks support
2019-05-07 11:45:13 -07:00
Jonas Gorski 5834fd75e6 clk: core: replace clk_{readl,writel} with {readl,writel}
Now that clk_{readl,writel} is just an alias for {readl,writel}, we can
switch all users of clk_* to use the accessors directly and remove the
helpers.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[sboyd@kernel.org: Also convert renesas file so that this can be
compile independently]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-23 10:57:49 -07:00
Douglas Anderson f4033db5b8 clk: rockchip: undo several noc and special clocks as critical on rk3288
This is mostly a revert of commit 55bb6a633c ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail).  It appears
to save maybe 1-2mW.  ...but still it seems like we should turn the
clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:

> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to
the CPU.  CPU functions fine without it on.  Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with
JTAG.  It doesn't seem like it makes sense to waste power for every
rk3288 user.  In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers.  Since nothing in the upstream kernel does this we should
be able to leave them off safely.  Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise.  I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-23 12:17:11 +02:00
Finley Xiao 1f55660ff8 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type
The div offset of some clocks are different from their mux offset
and the COMPOSITE clock-type require that div and mux offset are
the same, so add a new COMPOSITE_DIV_OFFSET clock-type to handle that.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-12 22:34:18 +02:00
Douglas Anderson 57a20248ef clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288
Experimentally it can be seen that going into deep sleep (specifically
setting PMU_CLR_DMA and PMU_CLR_BUS in RK3288_PMU_PWRMODE_CON1)
appears to fail unless "aclk_dmac1" is on.  The failure is that the
system never signals that it made it into suspend on the GLOBAL_PWROFF
pin and it just hangs.

NOTE that it's confirmed that it's the actual suspend that fails, not
one of the earlier calls to read/write registers.  Specifically if you
comment out the "PMU_GLOBAL_INT_DISABLE" setting in
rk3288_slp_mode_set() and then comment out the "cpu_do_idle()" call in
rockchip_lpmode_enter() then you can exercise the whole suspend path
without any crashing.

This is currently not a problem with suspend upstream because there is
no current way to exercise the deep suspend code.  However, anyone
trying to make it work will run into this issue.

This was not a problem on shipping rk3288-based Chromebooks because
those devices all ran on an old kernel based on 3.14.  On that kernel
"aclk_dmac1" appears to be left on all the time.

There are several ways to skin this problem.

A) We could add "aclk_dmac1" to the list of critical clocks and that
apperas to work, but presumably that wastes power.

B) We could keep a list of "struct clk" objects to enable at suspend
time in clk-rk3288.c and use the standard clock APIs.

C) We could make the rk3288-pmu driver keep a list of clocks to enable
at suspend time.  Presumably this would require a dts and bindings
change.

D) We could just whack the clock on in the existing syscore suspend
function where we whack a bunch of other clocks.  This is particularly
easy because we know for sure that the clock's only parent
("aclk_cpu") is a critical clock so we don't need to do anything more
than ungate it.

In this case I have chosen D) because it seemed like the least work,
but any of the other options would presumably also work fine.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-12 22:34:09 +02:00
Matthias Kaehlcke bf297420cc clk: rockchip: Limit use of USB PHY clock to USB on rk3288
The USB PHY clock can be configured as (grand) parent of uart0_sclk and
sclk_gpu. It has been observed that UART0 doesn't work reliably in high
speed mode with the PHY clock as input when certain USB devices are
plugged to the USB HOST1 port (see https://crrev.com/c/320543).

Prefix the name of the PHY clock with a '.' in the non-USB muxes to
effectively remove the clock as input from these muxes.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-12 11:28:50 +02:00
Douglas Anderson 00c0cd9e59 clk: rockchip: Fix video codec clocks on rk3288
It appears that there is a typo in the rk3288 TRM.  For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu".  It's
the other way around.

How do I know?  Here's my evidence:

1. Prior to commit 4d3e84f996 ("clk: rockchip: describe aclk_vcodec
   using the new muxgrf type on rk3288") we always pretended that we
   were using "aclk_vdpu" and the comment in the code said that this
   matched the default setting in the system.  In fact the default
   setting is 0 according to the TRM and according to reading memory
   at bootup.  In addition rk3288-based Chromebooks ran like this and
   the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
   new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
   on the command line), you get errors like "failed to get ack on
   domain 'pd_video', val=0x80208".  After flipping vepu/vdpu things
   init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
   for RK3288_PD_VIDEO I can get past the power domain errors, but now
   I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
   and probes OK showing that somehow the "vdpu" was important to keep
   enabled.  This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
   "aclk_vepu" using assigned-clocks and the video codec still probes
   OK.
6. Rockchip has said so on the mailing list [1].

...so let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested
by Jonas Karlman.  Prior to the same commit you could do
clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu".
That's because "aclk_vcodec" was a simple gate clock (always gets
CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu".  After
that commit "aclk_vcodec_pre" gets in the way so we need to add
CLK_SET_RATE_PARENT to it too.

[1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com

Fixes: 4d3e84f996 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Suggested-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-12 11:27:46 +02:00
Douglas Anderson dfe7fb21cd clk: rockchip: Make rkpwm a critical clock on rk3288
Most rk3288-based boards are derived from the EVB and thus use a PWM
regulator for the logic rail.  However, most rk3288-based boards don't
specify the PWM regulator in their device tree.  We'll deal with that
by making it critical.

NOTE: it's important to make it critical and not just IGNORE_UNUSED
because all PWMs in the system share the same clock.  We don't want
another PWM user to turn the clock on and off and kill the logic rail.

This change is in preparation for actually having the PWMs in the
rk3288 device tree actually point to the proper PWM clock.  Up until
now they've all pointed to the clock for the old IP block and they've
all worked due to the fact that rkpwm was IGNORE_UNUSED and that the
clock rates for both clocks were the same.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11 21:25:43 +02:00
Jonas Karlman fb90339213 clk: rockchip: fix wrong clock definitions for rk3328
This patch fixes definition of several clock gate and select register
that is wrong for rk3328 referring to the TRM and vendor kernel.
Also use correct number of softrst registers.

Fix clock definition for:
- clk_crypto
- aclk_h265
- pclk_h265
- aclk_h264
- hclk_h264
- aclk_axisram
- aclk_gmac
- aclk_usb3otg

Fixes: fe3511ad8a ("clk: rockchip: add clock controller for rk3328")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-03-18 08:45:55 +01:00
Finley Xiao 491b00ff69 clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks
Add CLK_SET_RATE_PARENT for both rk3066 lcdc dclk.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-07 09:17:15 +01:00
Katsuhiro Suzuki a0e447b0c5 clk: rockchip: fix frac settings of GPLL clock for rk3328
This patch fixes settings of GPLL frequency in fractional mode for
rk3328. In this mode, FOUTVCO is calcurated by following formula:
  FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24)

The problem is in FREF * FRAC >> 24 term. This result always lacks
one from target value is specified by rate member. For example first
itme of rk3328_pll_frac_rate originally has
  - rate  : 1016064000
  - refdiv: 3
  - fbdiv : 127
  - frac  : 134217
  - FREF * FBDIV / REFDIV        = 1016000000
  - (FREF * FRAC / REFDIV) >> 24 = 63999
Thus calculated rate is 1016063999. It seems wrong.

If frac has 134218 (it is increased 1 from original value), second
term is 64000. All other items have same situation. So this patch
adds 1 to frac member in all items of rk3328_pll_frac_rate.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Acked-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-07 09:17:15 +01:00
Katsuhiro Suzuki d0618247a8 clk: rockchip: add clock-id to gate of ACODEC for rk3328
Add the newly added clock-id for PCLK_ACODECPHY to the gate-clock,
so that it gets usable from devicetree.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-26 14:22:12 +01:00
Katsuhiro Suzuki 5c73ac2f8b clk: rockchip: fix I2S1 clock gate register for rk3328
This patch fixes definition of I2S1 clock gate register for rk3328.
Current setting is not related I2S clocks.
  - bit6 of CRU_CLKGATE_CON0 means clk_ddrmon_en
  - bit6 of CRU_CLKGATE_CON1 means clk_i2s1_en

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-19 14:39:29 +01:00
Mark Yao 8989e9d2e6 clk: rockchip: make rk3188 hclk_vio_bus critical
Vop register access request hclk_vio_bus.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-15 15:14:12 +01:00
Heiko Stuebner ac8cb53829 clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering
Similar to commit a9f0c0e563 ("clk: rockchip: fix rk3188 sclk_smc
gate data") there is one other gate clock in the rk3188 clock driver
with a similar wrong ordering, the sclk_mac_lbtest. So fix it as well.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-15 12:19:09 +01:00
Finley Xiao a9f0c0e563 clk: rockchip: fix rk3188 sclk_smc gate data
Fix sclk_smc gate data.
Change variable order, flags come before the register address.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx9999@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-15 12:11:37 +01:00
Johan Jonker 8b19faf6fa clk: rockchip: fix typo in rk3188 spdif_frac parent
Fix typo in common_clk_branches.
Make spdif_pre parent of spdif_frac.

Fixes: 6674642089 ("clk: rockchip: include downstream muxes into fractional dividers")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Jonker <jbx9999@hotmail.com>
Acked-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-12 16:41:14 +01:00
Enric Balletbo i Serra 665636b294 clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent call
Fixes the signedness bug returning '(-22)' on the return type by removing the
sanity checker in rockchip_ddrclk_get_parent(). The function should return
and unsigned value only and it's safe to remove the sanity checker as the
core functions that call get_parent like clk_core_get_parent_by_index already
ensures the validity of the clk index returned (index >= core->num_parents).

Fixes: a4f182bf81 ("clk: rockchip: add new clock-type for the ddrclk")
Cc: stable@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-10-17 15:12:51 +02:00
Heiko Stuebner cca8196bdf clk: rockchip: use the newly added clock-id for hdmi on RK3066
Export the clock for devicetree usage via the newly added id.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-10-11 14:57:28 +02:00
Ziyuan Xu 82f4b67f01 clk: rockchip: fix wrong mmc sample phase shift for rk3328
mmc sample shift is 0 for RK3328 referring to the TRM.
So fix them.

Fixes: fe3511ad8a ("clk: rockchip: add clock controller for rk3328")
Cc: stable@vger.kernel.org
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-10-11 14:36:01 +02:00
Urja Rannikko c14d28e86d clk: rockchip: improve rk3288 pll rates for better hdmi output
Add and correct PLL rates for better hdmi output.

This includes minimizing jitter on 213 MHz for better 71 MHz,
250.5 MHz for better 83.5 MHz, 428 MHz for better 25.175 Mhz,
low jitter 273 MHz for better 68.25 mhz, 356 MHz for better 118.68 Mhz
and 300MHz.

Increase the used Fvco for 308, 324 MHz, 292.5 MHz, 273.6 MHz,
238 MHz and 216 MHz.

And add some additional rates allowing to reach better hdmi-related
rates in general.

These match the rates used by ChromeOS, so have been quite widely tested.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-31 09:43:35 +02:00
Levin Du 640332d1a0 clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in
RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave
from power on and the VDD_LOG is about 0.9V. When the kernel boots
normally into the system, the PWM2 keeps outputing PWM signal.

But the kernel hangs randomly after "Starting kernel ..." line on that
board. When it happens, PWM2 outputs high level which causes VDD_LOG
drops to 0.4V below the normal operating voltage.

By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array,
PWM clock is ensured to be prepared at startup and the PWM2 output is
normal. After repeated tests, the early boot hang is gone.

This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards.

Signed-off-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-08-06 23:46:52 +02:00
Alberto Panizzo a64ad00898 clk: rockchip: fix clk_i2sout parent selection bits on rk3399
Register, shift and mask were wrong according to datasheet.

Fixes: 115510053e ("clk: rockchip: add clock controller for the RK3399")
Cc: stable@vger.kernel.org
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-08 00:19:19 +02:00
Elaine Zhang 243229b111 clk: rockchip: add clock controller for px30
Add the clock tree definition for the new px30 SoC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-06 19:17:57 +02:00
Elaine Zhang 956060a527 clk: rockchip: add support for half divider
The new Rockchip socs have optional half divider:
The formula is shown as:
	freq_out = 2*freq_in / (2*div + 3)
Is this the same for all of new SoCs.

So we use "branch_half_divider" + "COMPOSITE_NOMUX_HALFDIV \
DIV_HALF \ COMPOSITE_HALFDIV \ CMPOSITE_NOGATE_HALFDIV"
to hook that special divider clock-type into our clock-tree.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-06 19:17:57 +02:00
Heiko Stuebner 1d646229f2 clk: rockchip: remove deprecated gate-clk code and dt-binding
Initially we tried modeling clocks via the devicetree before switching
to clocks declared in the clock drivers and only exporting specific
ids to the devicetree.

As the old code was in the kernel for 1-2 releases when the new mode
of operation was added we kept it for backwards compatibility.

That deprecation notice is in the binding since july 2014, so nearly
4 years now and I think it's time to drop the old cruft.

Especially as at the time using the mainline kernel on Rockchip devices
was not really possible, except for experiments on the really old socs of
the rk3066 + rk3188 line, so there shouldn't be any devicetrees still
around that rely on that code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
2018-05-23 13:19:06 +02:00