- Thermal framework cleanups (self-encapsulation, pointless stubs,
private structures) (Daniel Lezcano)
- Use the PM QoS frequency changes for the devfreq cooling device (Matthias
Kaehlcke)
- Remove duplicate error messages from platform_get_irq() error handling
(Markus Elfring)
- Add support for the bandgap sensors (Keerthy)
- Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
- Add Renesas R-Car maintainer entry (Niklas Söderlund)
- Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC
thermal (Sudip Mukherjee)
- Add latency constraint for the idle injection, the DT binding and the change
the registering function (Daniel Lezcano)
- Convert the thermal framework binding to the Yaml schema (Amit Kucheria)
- Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva)
- Thermal framework cleanups (alphabetic order for heads, replace module.h by
export.h, make file naming consistent) (Amit Kucheria)
- Merge tsens-common into the tsens driver (Amit Kucheria)
- Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
- Clean up the rcar_thermal_update_temp() function in the rcar thermal driver
(Niklas Söderlund)
- Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang)
- Export GDDV, OEM vendor variables, and don't require IDSP for the int340x
thermal driver - trivial conflicts fixed (Matthew Garrett)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl7jra8ACgkQqDIjiipP
6E+ugAgApBF6FsHoonWIvoSrzBrrbU2oqhEJA42Mx+iY/UnXi01I79vZ/8WpZt7M
D1J01Kf0PUhRbywoKaoCX3Oh9ZO9PKq4N9ZC8yqdoD6GLl+rC9Wmr7Ui+c80klcv
M9rYhpPYfNXTFj0saSbbFWNNhP4TvhzGsNj8foYVQDKyhjbSmNE5ipZlbmP23jlr
O53SmJAwS5zxLOd8QA5nfSWP9FYYMuCR2AHj8BUCmxiAjXZLPNB/Hz2RRBr7q0MF
zRo/4HJ04mSQYp0kluP/EBhz9g2wM/htIPyWRveB/ByKEYt3UNKjB++PJmPbu5UG
dS3aXZhRfaPqpdsWrMB9fY7ll+oyfw==
=T+RI
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
private structures) (Daniel Lezcano)
- Use the PM QoS frequency changes for the devfreq cooling device
(Matthias Kaehlcke)
- Remove duplicate error messages from platform_get_irq() error
handling (Markus Elfring)
- Add support for the bandgap sensors (Keerthy)
- Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
- Add Renesas R-Car maintainer entry (Niklas Söderlund)
- Fix error checking after calling ti_bandgap_get_sensor_data() for the
TI SoC thermal (Sudip Mukherjee)
- Add latency constraint for the idle injection, the DT binding and the
change the registering function (Daniel Lezcano)
- Convert the thermal framework binding to the Yaml schema (Amit
Kucheria)
- Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
R. Silva)
- Thermal framework cleanups (alphabetic order for heads, replace
module.h by export.h, make file naming consistent) (Amit Kucheria)
- Merge tsens-common into the tsens driver (Amit Kucheria)
- Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
- Clean up the rcar_thermal_update_temp() function in the rcar thermal
driver (Niklas Söderlund)
- Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
Tang)
- Export GDDV, OEM vendor variables, and don't require IDSP for the
int340x thermal driver - trivial conflicts fixed (Matthew Garrett)
* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
thermal/int340x_thermal: Don't require IDSP to exist
thermal/int340x_thermal: Export OEM vendor variables
thermal/int340x_thermal: Export GDDV
thermal: qoriq: Update the settings for TMUv2
thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
thermal: qoriq: Add platform dependencies
drivers: thermal: tsens: Merge tsens-common.c into tsens.c
thermal/of: Rename of-thermal.c
thermal/governors: Prefix all source files with gov_
thermal/drivers/user_space: Sort headers alphabetically
thermal/drivers/of-thermal: Sort headers alphabetically
thermal/drivers/cpufreq_cooling: Replace module.h with export.h
thermal/drivers/cpufreq_cooling: Sort headers alphabetically
thermal/drivers/clock_cooling: Include export.h
thermal/drivers/clock_cooling: Sort headers alphabetically
thermal/drivers/thermal_hwmon: Include export.h
thermal/drivers/thermal_hwmon: Sort headers alphabetically
thermal/drivers/thermal_helpers: Include export.h
thermal/drivers/thermal_helpers: Sort headers alphabetically
thermal/core: Replace module.h with export.h
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75
GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I
v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS
kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF
yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6
2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ
CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F
rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw
FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1
65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b
rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM
G3PXIBOI0jRgRw==
=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Previous commit "b8eb718348b8" fixed a similar problem.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.
Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:
- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).
- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.
The device tree binding is the same, so the driver stays
compatible with all old device trees.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the cpuidle governor can be switched via sysfs in default,
remove sysfs_switch and cpuidle_switch_attrs.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For now cpuidle governor can be switched via sysfs only when the
boot option "cpuidle_sysfs_switch" is passed, but it's important
to switch the governor to adapt to different workloads, especially
after TEO and haltpoll governor were introduced.
Add available_governors and current_governor into the default
attributes, but reserve the current_governor_ro for compatiblity.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CPUIDLE_NAME_LEN is 16, so it's possible to accept governor name
with 15 characters, but now store_current_governor() rejects
governor name with 15 characters as it returns -EINVAL if count
equals CPUIDLE_NAME_LEN.
Refactor the code to accept such case and simplify the code.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When showing the available governors, it's "%s " in scnprintf(),
not "%s", so if the governor name has 15 characters, it will
overlap with the later one, fix it by adding one more for the
size.
While we are at it, fix the minor coding style issue and remove
the "/sizeof(char)" since sizeof(char) always equals 1.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpuidle driver can be used as a cooling device by injecting idle
cycles.
When the property is set, register the cpuidle driver with the idle
state node pointer as a cooling device. The thermal framework will do
the association automatically with the thermal zone via the
cooling-device defined in the device tree cooling-maps section.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200429103644.5492-4-daniel.lezcano@linaro.org
Moving forward, platforms are going to need to execute specific "last-man"
operations before a domain idle state can be entered. In one way or the
other, these operations needs to be triggered while walking the
hierarchical topology via runtime PM and genpd, as it's at that point the
last-man becomes known.
Moreover, executing last-man operations needs to be done after the CPU PM
notifications are sent through cpu_pm_enter(), as otherwise it's likely
that some notifications would fail. Therefore, let's re-order the sequence
in psci_enter_domain_idle_state(), so cpu_pm_enter() gets called prior
pm_runtime_put_sync().
Fixes: ce85aef570 ("cpuidle: psci: Manage runtime PM in the idle path")
Reported-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new Tegra CPU Idle driver now has a unified code path for the coupled
CC6 (LP2) state, this allows to enable the deepest idling state on Tegra30
SoC where the whole CPU cluster is power-gated.
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently when CPU goes idle, we take a snapshot of PURR via
pseries_idle_prolog() which is used at the CPU idle exit to compute
the idle PURR cycles via the function pseries_idle_epilog(). Thus,
the value of idle PURR cycle thus read before pseries_idle_prolog() and
after pseries_idle_epilog() is always correct.
However, if we were to read the idle PURR cycles from an interrupt
context between pseries_idle_prolog() and pseries_idle_epilog() (this
will be done in a future patch), then, the value of the idle PURR thus
read will not include the cycles spent in the most recent idle period.
Thus, in that interrupt context, we will need access to the snapshot
of the PURR before going idle, in order to compute the idle PURR
cycles for the latest idle duration.
In this patch, we save the snapshot of PURR in pseries_idle_prolog()
in a per-cpu variable, instead of on the stack, so that it can be
accessed from an interrupt context.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-3-git-send-email-ego@linux.vnet.ibm.com
Currently prior to entering an idle state on a Linux Guest, the
pseries cpuidle driver implement an idle_loop_prolog() and
idle_loop_epilog() functions which ensure that idle_purr is correctly
computed, and the hypervisor is informed that the CPU cycles have been
donated.
These prolog and epilog functions are also required in the default
idle call, i.e pseries_lpar_idle(). Hence move these accessor
functions to a common header file and call them from
pseries_lpar_idle(). Since the existing header files such as
asm/processor.h have enough clutter, create a new header file
asm/idle.h. Finally rename idle_loop_prolog() and idle_loop_epilog()
to pseries_idle_prolog() and pseries_idle_epilog() as they are only
relavent for on pseries guests.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1586249263-14048-2-git-send-email-ego@linux.vnet.ibm.com
The define_one_ro and define_one_rw macros are not used,
remove it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including
cpuidle, pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=UTk1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
* pm-cpuidle:
cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint
intel_idle: Update copyright notice, known limitations and version
intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16)
intel_idle: Clean up kerneldoc comments for multiple functions
intel_idle: Reorder declarations of static variables
intel_idle: Annotate init time data structures
intel_idle: Add __initdata annotations to init time variables
intel_idle: Relocate definitions of cpuidle callbacks
intel_idle: Clean up definitions of cpuidle callbacks
intel_idle: Simplify LAPIC timer reliability checks
To make the code a bit more readable, let's move the OSI specific
initialization out of the psci_dt_cpu_init_idle() and into a separate
function.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Before commit 1328edca4a ("cpuidle-haltpoll: Enable kvm guest polling
when dedicated physical CPUs are available") the cpuidle-haltpoll driver
could also be used in scenarios when the host does not advertise the
KVM_HINTS_REALTIME hint.
While the behavior introduced by the aforementioned commit makes sense as
the default there are cases where the old behavior is desired, for example,
when other kernel changes triggered by presence by this hint are unwanted,
for some workloads where the latency benefit from polling overweights the
loss from idle CPU capacity that otherwise would be available, or just when
running under older Qemu versions that lack this hint.
Let's provide a typical "force" module parameter that allows restoring the
old behavior.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
LP2 suspending could be unavailable, for example if it is disabled in a
device-tree. CC6 cpuidle state won't work in that case.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra20/30/114/124 SoCs have common idling states, thus there is no much
point in having separate drivers for a similar hardware. This patch moves
Tegra114/124 arch/ drivers into the common driver without any functional
changes. The CC6 state is kept disabled on Tegra114/124 because the core
Tegra PM code needs some more work in order to support that state.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra20 and Terga30 SoCs have common C1 and CC6 idling states and thus
share the same code paths, there is no point in having separate drivers
for a similar hardware. This patch merely moves functionality of the old
driver into the new, although the CC6 state is kept disabled for now since
old driver had a rudimentary support for this state (allowing to enter
into CC6 only when secondary CPUs are put offline), while new driver can
provide a full-featured support. The new feature will be enabled by
another patch.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later on. The
current functionality is equal to the old Tegra20 driver, only the
code's structure changed a tad. This is also a proper platform driver
now.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Call cpu_latency_qos_limit() instead of pm_qos_request(), because the
latter is going to be dropped.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Notice that pm_qos_remove_notifier() is not used at all and the only
caller of pm_qos_add_notifier() is the cpuidle core, which only needs
the PM_QOS_CPU_DMA_LATENCY notifier to invoke wake_up_all_idle_cpus()
upon changes of the PM_QOS_CPU_DMA_LATENCY target value.
First, to ensure that wake_up_all_idle_cpus() will be called
whenever the PM_QOS_CPU_DMA_LATENCY target value changes, modify the
pm_qos_add/update/remove_request() family of functions to check if
the effective constraint for the PM_QOS_CPU_DMA_LATENCY has changed
and call wake_up_all_idle_cpus() directly in that case.
Next, drop the PM_QOS_CPU_DMA_LATENCY notifier from cpuidle as it is
not necessary any more.
Finally, drop both pm_qos_add_notifier() and pm_qos_remove_notifier(),
as they have no callers now, along with cpu_dma_lat_notifier which is
only used by them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller pieces
for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
+ Misc cleanups, refactorings of Marvell, TI, other platforms.
-----BEGIN PGP SIGNATURE-----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=ONtb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.
* intel_idle+acpi:
Documentation: admin-guide: PM: Add intel_idle document
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
ACPI: processor: Export acpi_processor_evaluate_cst()
ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
ACPI: processor: Clean up acpi_processor_evaluate_cst()
ACPI: processor: Introduce acpi_processor_evaluate_cst()
ACPI: processor: Export function to claim _CST control
Fix cpuidle_find_deepest_state() kernel documentation to avoid
warnings when compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix kernel documentation comments to remove warnings when
compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix warnings that show up when compiling with W=1
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of cpuidle drivers for ARMv7 can be compile tested on this
architecture because they do not depend on mach-specific bits. Enable
compile testing for big.LITTLE, Kirkwood, Zynq, AT91, Exynos and mvebu
cpuidle drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a simple bug in rotating array index.
Fixes: b26bf6ab71 ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpuidle_driver_ref() and cpuidle_driver_unref() functions are not
used and the refcnt field in struct cpuidle_driver operated by them
is not updated anywhere else (so it is permanently equal to 0), so
drop both of them along with refcnt.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
When the hierarchical CPU topology is used and when a CPU is put offline,
that CPU prevents its PM domain from being powered off, which is because
genpd observes the corresponding attached device as being active from a
runtime PM point of view. Furthermore, any potential master PM domains are
also prevented from being powered off.
To address this limitation, let's add add a new CPU hotplug state
(CPUHP_AP_CPU_PM_STARTING) and register up/down callbacks for it, which
allows us to deal with runtime PM accordingly.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
In case we have succeeded to attach a CPU to its PM domain, let's deploy
runtime PM support for the corresponding attached device, to allow the CPU
to be powered-managed accordingly.
The triggering point for when runtime PM reference counting should be done,
has been selected to the deepest idle state for the CPU. However, from the
hierarchical point view, there may be good reasons to do runtime PM
reference counting even on shallower idle states, but at this point this
isn't supported, mainly due to limitations set by the generic PM domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
The per CPU variable psci_power_state, contains an array of fixed values,
which reflects the corresponding arm,psci-suspend-param parsed from DT, for
each of the available CPU idle states.
This isn't sufficient when using the hierarchical CPU topology in DT, in
combination with having PSCI OS initiated (OSI) mode enabled. More
precisely, in OSI mode, Linux is responsible of telling the PSCI FW what
idle state the cluster (a group of CPUs) should enter, while in PSCI
Platform Coordinated (PC) mode, each CPU independently votes for an idle
state of the cluster.
For this reason, introduce a per CPU variable called domain_state and
implement two helper functions to read/write its value. Then let the
domain_state take precedence over the regular selected state, when entering
and idle state.
To avoid executing the above OSI specific code in the ->enter() callback,
while operating in the default PSCI Platform Coordinated mode, let's also
add a new enter-function and use it for OSI.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
In order to enable a CPU to be power managed through its PM domain, let's
try to attach it by calling psci_dt_attach_cpu() during the cpuidle
initialization.
psci_dt_attach_cpu() returns a pointer to the attached struct device, which
later should be used for runtime PM, hence we need to store it somewhere.
Rather than adding yet another per CPU variable, let's create a per CPU
struct to collect the relevant per CPU variables.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a
CPU number as an in-parameter and tries to attach the CPU's struct device
to its corresponding PM domain.
Let's makes use of dev_pm_domain_attach_by_name(), as it allows us to
specify "psci" as the "name" of the PM domain to attach to. Additionally,
let's also prepare the attached device to be power managed via runtime PM.
Note that, the implementation of the new helper function is in a new
separate c-file, which may seems a bit too much at this point. However,
subsequent changes that implements the remaining part of the PM domain
support for cpuidle-psci, helps to justify this split.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Currently CPU's idle states are represented using the flattened model.
Let's add support for the hierarchical layout, via converting to use
of_get_cpu_state_node().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Iterating through the idle state nodes in DT, to find out the number of
states that needs to be allocated is unnecessary, as it has already been
done from dt_init_idle_driver(). Therefore, drop the iteration and use the
number we already have at hand.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Currently CPU's idle states are represented using the flattened model.
Let's add support for the hierarchical layout, via converting to use
of_get_cpu_state_node().
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Instead of allocating 'n-1' states in psci_power_state to manage 'n'
idle states which include "ARM WFI" state, it would be simpler to have
1:1 mapping between psci_power_state and cpuidle driver states.
ARM WFI state(i.e. idx == 0) is handled specially in the generic macro
CPU_PM_CPU_IDLE_ENTER_PARAM and hence state[-1] is not possible. However
for sake of code readability, it is better to have 1:1 mapping and not
use [idx - 1] to access psci_power_state corresponding to driver cpuidle
state for idx.
psci_power_state[0] is default initialised to 0 and is never accessed
while entering WFI state.
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
In certain situations it may be useful to prevent some idle states
from being used by default while allowing user space to enable them
later on.
For this purpose, introduce a new state flag, CPUIDLE_FLAG_OFF, to
mark idle states that should be disabled by default, make the core
set CPUIDLE_STATE_DISABLED_BY_USER for those states at the
initialization time and add a new state attribute in sysfs,
"default_status", to inform user space of the initial status of
the given idle state ("disabled" if CPUIDLE_FLAG_OFF is set for it,
"enabled" otherwise).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds
Qiushi Wu
Stephan Gerhold
Hanjun Guo
Daniel Lezcano
Ulf Hansson
Dmitry Osipenko
Gautham R. Shenoy
Rafael J. Wysocki
Yihao Wu
Maciej S. Szmigiero
Benjamin Gaignard
Krzysztof Kozlowski
Ikjoon Jang
Lina Iyer
Sudeep Holla
Yangtao Li