Markus reported that there's a weird behavior on perf top --hierarchy
regarding the column length.
Looking at the code, I found a dubious code which affects the symptoms.
When --hierarchy option is used, the last column length might be
inaccurate since it skips to update the length on leaf entries.
I cannot remember why it did and looks like a leftover from previous
version during the development.
Anyway, updating the column length often is not harmful. So let's move
the code out.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 1a3906a7e6 ("perf hists: Resort hist entries with hierarchy")
Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When horizontall scrolling is used in hierarchy mode, the the right most
column has unnecessary indentation. Actually it's needed only if some
of left (overhead) columns were shown.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When horizontal scrolling is used in hierarchy mode, the folded signed
disappears at the right most column.
Committer note:
To test it, run 'perf top --hierarchy, see the '+' symbol at the first
column, then press the right arrow key, the '+' symbol will disappear,
this patch fixes that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org
[ Move 'width -= 2' invariant to right after the if/else ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should indent 2 spaces for folded sign and a whitespace.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.
But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.
In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building on Ubuntu 16.04, I get the following error:
Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop.
The problem is that update-java-alternatives has multiple spaces between
fields, and cut treats each space as a new delimiter:
java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el
Fix this by using awk, which handles this fine.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476325243-15788-1-git-send-email-anton@ozlabs.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch helps with Sukadev's vendor event tree where such events can happen.
>From Andi Kleen:
Any event including a .c/.o/.bpf currently triggers BPF compilation or loading
and then an error. This can happen for some Intel vendor events, which cannot
be used.
This patch fixes this problem by forbidding BPF file patch containing '{', '}'
and ',', make sure flex consumes the leading '{', instead of matching it using
a BPF file path.
Tested result:
$ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000
invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}'
Run 'perf list' for a list of valid events
(as expected, interperted as event)
$ perf stat -e 'aaa.c' -a -I 1000
ERROR: problems with path aaa.c: No such file or directory
(as expected, interpreted as BPF source)
$ perf stat -e 'aaa.ccc' -a -I 1000
invalid or unsupported event: 'aaa.ccc'
(as expected, interpreted as event)
$ perf stat -e '{aaa.c}' -a -I 1000
ERROR: problems with path aaa.c: No such file or directory
event syntax error: '{aaa.c}'
<SKIP>
(as expected, interpreted as BPF source)
$ perf stat -e '{cycles,aaa.c}' -a -I 1000
ERROR: problems with path aaa.c: No such file or directory
event syntax error: '{cycles,aaa.c}'
(as expected, interpreted as BPF source)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev reported segfault on releasing perf env's numa data. It's due
to nr_numa_nodes being set no matter if the numa data gets parsed
properly. The perf_env__exit crash the on releasing non existed data.
Setting nr_numa_nodes only when data are parsed out properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dt9c0zgkt4hybn2cr4xiawta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported that 'perf top --hierarchy' cannot scroll down after
refresh. This was because the number of entries are not updated when
hierarchy is enabled.
Unlike normal report view, hierarchy mode needs to keep its own entry
count since it can have non-leaf entries which can expand/collapse.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f5b763feeb ("perf hists browser: Count number of hierarchy entries")
Link: http://lkml.kernel.org/r/20161007050412.3000-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add two tips that describe --list option of config sub-command and
explain how to choose particular config file location.
Signed-off-by: Nambong Ha <over3025@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <taeung@kosslab.kr>
Link: http://lkml.kernel.org/r/1475191562-3240-1-git-send-email-over3025@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Donghyun Kim <dongdong9335@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <taeung@kosslab.kr>
Link: http://lkml.kernel.org/r/1475187357-21882-1-git-send-email-dongdong9335@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a existing tip as below.
If you have debuginfo enabled, try: perf report -s sym,srcline
However this tip only describe a condition to use --sort sym,scrline
options. So there is lack of explanation in the tip. I think that it
would be better to add a tip that exactly explains the feature of --sort
srcline.
Signed-off-by: Seonyoung Kim <adamas0414@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <taeung@kosslab.kr>
Link: http://lkml.kernel.org/r/1475194602-5596-1-git-send-email-adamas0414@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel fixed counters are special cases in the JSON conversion process
because their decoding differs between perf and the event files. Add
some missing entries in the conversion table.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1475696832-9188-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The MTC packet provides a 8-bit slice of CTC which is related to TSC by
the TMA packet, however the TMA packet only provides the lower 16 bits
of CTC. If mtc_shift > 8 then some of the MTC bits are not in the CTC
provided by the TMA packet. Fix-up the last_mtc calculated from the TMA
packet by copying the missing bits from the current MTC assuming the
least difference between the two, and that the current MTC comes after
last_mtc.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1475062896-22274-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In cycle-accurate mode, timestamps can be calculated from CYC packets.
The decoder also estimates timestamps based on the number of
instructions since the last timestamp. For that to work in
cycle-accurate mode, the instruction count needs to be reset to zero
when a timestamp is calculated from a CYC packet, but that wasn't
happening, so fix it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1475062896-22274-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf uretprobe probes on GEP(Global Entry Point) which fails to record
all function calls via LEP(Local Entry Point). Fix that by probing on LEP.
Objdump:
00000000100005f0 <doit>:
100005f0: 02 10 40 3c lis r2,4098
100005f4: 00 7f 42 38 addi r2,r2,32512
100005f8: a6 02 08 7c mflr r0
100005fc: 10 00 01 f8 std r0,16(r1)
10000600: f8 ff e1 fb std r31,-8(r1)
Before applying patch:
$ cat /sys/kernel/debug/tracing/uprobe_events
r:probe_uprobe_test/doit /home/ravi/uprobe_test:0x00000000000005f0
After applying patch:
$ cat /sys/kernel/debug/tracing/uprobe_events
r:probe_uprobe_test/doit /home/ravi/uprobe_test:0x00000000000005f8
This is not the case with kretprobes because the kernel itself finds LEP
and probes on it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1475576865-6562-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The JSON event lists use a different encoding for fixed counters than
perf for instructions and cycles (ref-cycles is ok)
This lead to some common events like inst_retired.any or
cpu_clk_unhalted.thread not counting, when specified with their JSON
name.
Special case these events in the jevents conversion process. I prefer
to not touch the JSON files for this, as it's intended that standard
JSON files can be just dropped into the perf build without changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[Fix minor compile error]
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-18-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make alias matching the events parser case-insensitive. This is useful
with the JSON events. perf uses lower case events, but the CPU manuals
generally use upper case event names. The JSON files use lower case by
default too. But if we search case insensitively then users can
cut-n-paste the upper case event names.
So the following works:
% perf stat -e BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL true
Performance counter stats for 'true':
305 BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL
0.000492799 seconds time elapsed
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-17-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This avoids the JSON PMU events parser having to know whether its
aliases are for perf stat or perf record.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-20-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to group the output of perf list by the Topic field in the
JSON file.
Example output:
% perf list
...
Cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.pending
[L1D miss oustandings duration in cycles]
l1d_pend_miss.pending_cycles
[Cycles with L1D load Misses outstanding]
l2_l1d_wb_rqsts.all
[Not rejected writebacks from L1D to L2 cache lines in any state]
l2_l1d_wb_rqsts.hit_e
[Not rejected writebacks from L1D to L2 cache lines in E state]
l2_l1d_wb_rqsts.hit_m
[Not rejected writebacks from L1D to L2 cache lines in M state]
...
Pipeline:
arith.fpu_div
[Divide operations executed]
arith.fpu_div_active
[Cycles when divider is busy executing divide operations]
baclears.any
[Counts the total number when the front end is resteered, mainly
when the BPU cannot provide a correct prediction and this is
corrected by other branch handling mechanisms at the front end]
br_inst_exec.all_branches
[Speculative and retired branches]
br_inst_exec.all_conditional
[Speculative and retired macro-conditional branches]
br_inst_exec.all_direct_jmp
[Speculative and retired macro-unconditional branches excluding
calls and indirects]
br_inst_exec.all_direct_near_call
[Speculative and retired direct near calls]
br_inst_exec.all_indirect_jump_non_call_ret
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-14-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.
Old perf list:
baclears:
baclears.all
[Counts the number of baclears]
vs new:
perf list -v:
...
baclears:
baclears.all
[The BACLEARS event counts the number of times the front end is
resteered, mainly when the Branch Prediction Unit cannot provide
a correct prediction and this is corrected by the Branch Address
Calculator at the front end. The BACLEARS.ANY event counts the
number of baclears for any type of branch]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement support in jevents to parse long descriptions for events that
may have them in the JSON files. A follow on patch will make this long
description available to user through the 'perf list' command.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-11-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a PERF_CPUID variable to override the CPUID of the current CPU
(within the current architecture). This is useful for testing, so that
all event lists can be tested on a single system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-10-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.
It's still default to print descriptions as that is the more useful
default for most users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Automatically adapt the now wider and word wrapped perf list output to
wider terminals. This requires querying the terminal before the auto
pager takes over, and exporting this information from the pager
subsystem.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-8-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to print alias descriptions in perf list, which are taken
from the generated event files.
The sorting code is changed to put the events with descriptions at the
end. The descriptions are printed as possibly multiple word wrapped
lines.
Example output:
% perf list
...
arith.fpu_div
[Divide operations executed]
arith.fpu_div_active
[Cycles when divider is busy executing divide operations]
Committer notes:
Further testing on a Broadwell machine (ThinkPad t450s), using these
files:
$ find tools/perf/pmu-events/arch/x86/
tools/perf/pmu-events/arch/x86/
tools/perf/pmu-events/arch/x86/Broadwell
tools/perf/pmu-events/arch/x86/Broadwell/Cache.json
tools/perf/pmu-events/arch/x86/Broadwell/Other.json
tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json
tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json
tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json
tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json
tools/perf/pmu-events/arch/x86/Broadwell/Memory.json
tools/perf/pmu-events/arch/x86/mapfile.csv
$
Taken from:
https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/
to get this machinery to actually parse JSON files, generate
$(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that
will then use the table it contains, these files will be submitted right
after this patchkit.
[acme@jouet linux]$ perf list page_walker
List of pre-defined events (to be used in -e):
page_walker_loads.dtlb_l1
[Number of DTLB page walker hits in the L1+FB]
page_walker_loads.dtlb_l2
[Number of DTLB page walker hits in the L2]
page_walker_loads.dtlb_l3
[Number of DTLB page walker hits in the L3 + XSNP]
page_walker_loads.dtlb_memory
[Number of DTLB page walker hits in Memory]
page_walker_loads.itlb_l1
[Number of ITLB page walker hits in the L1+FB]
page_walker_loads.itlb_l2
[Number of ITLB page walker hits in the L2]
page_walker_loads.itlb_l3
[Number of ITLB page walker hits in the L3 + XSNP]
[acme@jouet linux]$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-7-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To work with existing mapfiles, assume that the first line in
'mapfile.csv' is a header line and skip over it.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-15-git-send-email-sukadev@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement the code to match CPU types to mapfile types for x86 based on
CPUID. This extends an existing similar function, but changes it to use
the x86 mapfile cpu description. This allows to resolve event lists
generated by jevents.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-6-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement code that returns the generic CPU ID string for Powerpc. This
will be used to identify the specific table of PMU events to
parse/compare user specified events against.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-5-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At run time (when 'perf' is starting up), locate the specific table of
PMU events that corresponds to the current CPU. Using that table, create
aliases for the each of the PMU events in the CPU. The use these aliases
to parse the user specified perf event.
In short this would allow the user to specify events using their aliases
rather than raw event codes.
Based on input and some earlier patches from Andi Kleen, Jiri Olsa.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-4-git-send-email-sukadev@linux.vnet.ibm.com
[ Make pmu_add_cpu_aliases() return void, since it was returning just '0' and
furthermore, even that was being discarded via an explicit (void) cast ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a modified version of an earlier patch by Andi Kleen.
We expect architectures to create JSON files describing the performance
monitoring (PMU) events that each CPU model/family of the architecture
supports.
Following is an example of the JSON file entry for an x86 event:
[
...
{
"EventCode": "0x00",
"UMask": "0x01",
"EventName": "INST_RETIRED.ANY",
"BriefDescription": "Instructions retired from execution.",
"PublicDescription": "Instructions retired from execution.",
"Counter": "Fixed counter 1",
"CounterHTOff": "Fixed counter 1",
"SampleAfterValue": "2000003",
"SampleAfterValue": "2000003",
"MSRIndex": "0",
"MSRValue": "0",
"TakenAlone": "0",
"CounterMask": "0",
"Invert": "0",
"AnyThread": "0",
"EdgeDetect": "0",
"PEBS": "0",
"PRECISE_STORE": "0",
"Errata": "null",
"Offcore": "0"
},
...
]
All the PMU events supported by a CPU model/family must be grouped into
"topics" such as "Pipelining", "Floating-point", "Virtual-memory" etc.
All events belonging to a topic must be placed in a separate JSON file
(eg: "Pipelining.json") and all the topic JSON files for a CPU model must
be in a separate directory.
Eg: for the CPU model "Silvermont_core":
$ ls tools/perf/pmu-events/arch/x86/Silvermont_core
Floating-point.json
Memory.json
Other.json
Pipelining.json
Virtualmemory.json
Finally, to allow multiple CPU models to share a single set of JSON files,
architectures must provide a mapping between a model and its set of events:
$ grep Silvermont tools/perf/pmu-events/arch/x86/mapfile.csv
GenuineIntel-6-4D,V13,Silvermont_core,core
GenuineIntel-6-4C,V13,Silvermont_core,core
which maps each CPU, identified by [vendor, family, model, version, type]
to a directory of JSON files. Thus two (or more) CPU models support the
set of PMU events listed in the directory.
tools/perf/pmu-events/arch/x86/Silvermont_core/
Given this organization of files, the program, jevents:
- locates all JSON files for each CPU-model of the architecture,
- parses all JSON files for the CPU-model and generates a C-style
"PMU-events table" (pmu-events.c) for the model
- locates a mapfile for the architecture
- builds a global table, mapping each model of CPU to the corresponding
PMU-events table.
The 'pmu-events.c' is generated when building perf and added to libperf.a.
The global table pmu_events_map[] table in this pmu-events.c will be used
in perf in a follow-on patch.
If the architecture does not have any JSON files or there is an error in
processing them, an empty mapping file is created. This would allow the
build of perf to proceed even if we are not able to provide aliases for
events.
The parser for JSON files allows parsing Intel style JSON event files. This
allows to use an Intel event list directly with perf. The Intel event lists
can be quite large and are too big to store in unswappable kernel memory.
The conversion from JSON to C-style is straight forward. The parser knows
(very little) Intel specific information, and can be easily extended to
handle fields for other CPUs.
The parser code is partially shared with an independent parsing library,
which is 2-clause BSD licensed. To avoid any conflicts I marked those
files as BSD licensed too. As part of perf they become GPLv2.
Committer notes:
Fixes:
1) Limit maxfds to 512 to avoid nftd() segfaulting on alloca() with a
big rlim_max, as in docker containers - acme
2) Make jevents a hostprog, supporting cross compilation - jolsa
3) Use HOSTCC for jevents final step - acme
4) Define _GNU_SOURCE for asprintf, as we can't use CC's EXTRA_CFLAGS,
that has to have --sysroot on the Android NDK 24 - acme
5) Removed $(srctree)/tools/perf/pmu-events/pmu-events.c from the
'clean' target, it is generated on $(OUTPUT)pmu-events/pmu-events.c,
which is already taken care of in the original patch - acme
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-3-git-send-email-sukadev@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20160927141846.GA6589@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I need a JSON parser. This adds the simplest JSON parser I could find --
Serge Zaitsev's jsmn `jasmine' -- to the perf library. I merely
converted it to (mostly) Linux style and added support for non 0
terminated input.
The parser is quite straight forward and does not copy any data, just
returns tokens with offsets into the input buffer. So it's relatively
efficient and simple to use.
The code is not fully checkpatch clean, but I didn't want to completely
fork the upstream code.
Original source: http://zserge.bitbucket.org/jsmn.html
In addition I added a simple wrapper that mmaps a json file and provides
some straight forward access functions.
Used in follow-on patches to parse event files.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-2-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[ Use fcntl.h instead of sys/fcntl.h to fix the build on Alpine Linux 3.4/musl libc,
use stdbool.h to avoid clashing with 'bool' typedef there ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Experimenting a bit using cppcheck[1], a static checker brought to my
attention by Colin, reducing the scope of some variables, reducing the
line of source code lines in the process:
$ cppcheck --enable=style tools/perf/util/thread.c
Checking tools/perf/util/thread.c...
[tools/perf/util/thread.c:17]: (style) The scope of the variable 'leader' can be reduced.
[tools/perf/util/thread.c:133]: (style) The scope of the variable 'err' can be reduced.
[tools/perf/util/thread.c:273]: (style) The scope of the variable 'err' can be reduced.
Will continue later, but these are already useful, keep them.
1: https://sourceforge.net/p/cppcheck/wiki/Home/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ixws7lbycihhpmq9cc949ti6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Static anaylsis with cppcheck[1] detected an incorrect comparison:
[tools/perf/util/probe-event.c:216]: (warning) Char literal compared
with pointer 'ptr2'. Did you intend to dereference it?
Dereference ptr2 for the comparison to fix this.
1: https://sourceforge.net/p/cppcheck/wiki/Home/
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 35726d3a4c ("perf probe: Fix to cut off incompatible chars from group name")
Link: http://lkml.kernel.org/r/20161003103431.18534-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The user stack dump feature was recently added for powerpc. But there
was no test case available to test it.
This test works same as on other architectures by preparing a stack
frame on the perf test thread and comparing each frame by unwinding it.
$ ./perf test 50
50: Test dwarf unwind : Ok
User stack dump for powerpc: https://lkml.org/lkml/2016/4/28/482
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1474267100-31079-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Match linkage name with mangled name if exists. The linkage_name is used
for storing mangled name of the object.
Thus, this allows 'perf probe' to find appropriate probe point from
mangled symbol as below.
E.g. without this fix:
----
$ perf probe -x /usr/lib64/libstdc++.so.6 \
-D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
Probe point '_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv'
not found.
Error: Failed to add events.
----
With this fix, perf probe can find the correct one.
----
$ perf probe -x /usr/lib64/libstdc++.so.6 \
-D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
p:probe_libstdc/_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
/usr/lib64/libstdc++.so.6.0.22:0x8ca60
----
Committer notes:
After the fix, setting it for real (no -D/--definition, that amounts to
a --dry-run):
# perf probe -x /usr/lib64/libstdc++.so.6 _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
Added new event:
probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv in /usr/lib64/libstdc++.so.6.0.22)
You can now use it in all perf tools, such as:
perf record -e probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv -aR sleep 1
# perf probe -l probe_libstdc:*
probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
#
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/147464493162.29804.16715053505069382443.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cut off the characters which can not use for group name of uprobes
when making it based on executable filename.
For example, if the exec name is libstdc++.so, without this fix
perf probe generates "probe_libstdc++" as the group name, but
it is failed to set because '+' can not be used for group name.
With this fix perf accepts only alphabet, number or '_' for group
name, thus perf generates "probe_libstdc" as the group name.
E.g. with this fix, you can see the event name has no "+".
----
$ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open
p:probe_libstdc/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
p:probe_libstdc/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
p:probe_libstdc/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
p:probe_libstdc/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
p:probe_libstdc/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
----
Committer note:
Before this fix:
# perf probe -x /usr/lib64/libstdc++.so.6 is_open
Failed to write event: Invalid argument
Error: Failed to add events.
#
After the fix:
# perf probe -x /usr/lib64/libstdc++.so.6 is_open
Added new events:
probe_libstdc:is_open (on is_open in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_1 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_2 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_3 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_4 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
You can now use it in all perf tools, such as:
perf record -e probe_libstdc:is_open_4 -aR sleep 1
# perf probe -l probe_libstdc:*
probe_libstdc:is_open (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_1 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_2 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_3 (on is_open@src/c++98/basic_file.cc in /usr/lib64/libstdc++.so.6.0.22)
probe_libstdc:is_open_4 (on stdio_filebuf:5@include/ext/stdio_filebuf.h in /usr/lib64/libstdc++.so.6.0.22)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464491667.29804.9553638175441827970.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skip probes if the entry address of the target function is 0. This can
happen when we're handling C++ debuginfo files.
E.g. without this fix, below case still fail.
----
$ ./perf probe -x /usr/lib64/libstdc++.so.6 -vD is_open
probe-definition(0): is_open
symbol:is_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null)
Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug
Try to find probe point from debuginfo.
Matched function: is_open [295df]
found inline addr: 0x8ca80
Probe point found: is_open+0
found inline addr: 0x8ca70
Probe point found: is_open+0
found inline addr: 0x8ca60
Probe point found: is_open+0
Matched function: is_open [6527f]
Matched function: is_open [9fe8a]
Probe point found: is_open+0
Matched function: is_open [19710b]
found inline addr: 0xecca9
Probe point found: stdio_filebuf+57
found inline addr: 0x0
Probe point found: swap+0
Matched function: is_open [19fc9d]
Probe point found: is_open+0
Found 7 probe_trace_events.
p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
Failed to synthesize probe trace event.
Error: Failed to add events. Reason: Invalid argument (Code: -22)
----
This is because some instances have entry_pc == 0 (see 19710b and
19fc9d). With this fix, those are skipped.
----
$ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open
p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464490707.29804.14277897643725143867.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ignore the error when the perf probe failed to find inline function
instances. This can happen when we search a method in C++ debuginfo. If
there is completely no instance in target, perf probe can return an
error.
E.g. without this fix:
----
$ perf probe -x /usr/lib64/libstdc++.so.6 -vD showmanyc
probe-definition(0): showmanyc
symbol:showmanyc file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null)
symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null)
Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug
Try to find probe point from debuginfo.
Matched function: showmanyc
An error occurred in debuginfo analysis (-2).
Trying to use symbols.
Failed to find symbol showmanyc in /usr/lib64/libstdc++.so.6.0.22
Error: Failed to add events. Reason: No such file or directory (Code: -2)
----
This is because one of showmanyc is defined as inline but no instance
found. With this fix, it is succeeded to show as below.
----
$ perf probe -x /usr/lib64/libstdc++.so.6 -D showmanyc
p:probe_libstdc++/showmanyc /usr/lib64/libstdc++.so.6.0.22:0xb0e50
p:probe_libstdc++/showmanyc_1 /usr/lib64/libstdc++.so.6.0.22:0xc7c40
p:probe_libstdc++/showmanyc_2 /usr/lib64/libstdc++.so.6.0.22:0xecfa0
p:probe_libstdc++/showmanyc_3 /usr/lib64/libstdc++.so.6.0.22:0x115fc0
p:probe_libstdc++/showmanyc_4 /usr/lib64/libstdc++.so.6.0.22:0x121a90
----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464489775.29804.3190419491209875936.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload",
the Intel PT decoder needs to match address filters against TIP.PGD
packets. Parse the address filters and implement the decoder's
'pgd_ip()' callback to match the IP against the filter regions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When address filters are used, the decoder must detect the end of a
filter region (or a branch into a tracestop region) by matching Packet
Generation Disabled (TIP.PGD) packets against the object code using the
IP given in the packet. However, due to errata SKL014 "Intel PT TIP.PGD
May Not Have Target IP Payload", that IP may not be present.
Enable the decoder to handle that by adding a new callback function
'pgd_ip()' which indicates whether the IP is not traced, in which case
that is the point where the trace was disabled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Read the address filter from the AUXTRACE_INFO event in preparation for
using it to assist in decoding.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The address filter is needed to help decode the trace, so store it in
the AUXTRACE_INFO event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a helper function 'intel_pt_has()' to make it easier to determine
which members the AUXTRACE_INFO event contains.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix 2 places where the err variable was not being set.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously the maximum non-turbo ratio was calculated from TSC assuming
a 100 MHz multiplier which is correct for current hardware supporting
Intel PT. However more recent kernels also now export the value, so use
that in preference to the calculated value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix occasional decoder errors decoding trace data collected in snapshot
mode.
Snapshot mode can take successive snapshots of trace which might overlap.
The decoder checks whether there is an overlap but only looks at the
current and previous buffer. However buffers that do not contain
synchronization (i.e. PSB) packets cannot be decoded or used for overlap
checking. That means the decoder actually needs to check overlaps between
the current buffer and the previous buffer that contained usable data.
Make that change.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1474641528-18776-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two SDT debug messages can occur for every DSO which is too noisy.
Consequently, increase debug level of SDT messages.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim
Anton Blanchard
Wang Nan
Jiri Olsa
Nambong Ha
Donghyun Kim
Kim SeonYoung
Andi Kleen
Adrian Hunter
Ravi Bangoria
Sukadev Bhattiprolu
Arnaldo Carvalho de Melo
Colin Ian King
Masami Hiramatsu