The move of TIF_SYSCALL_EMU to SYSCALL_WORK_SYSCALL_EMU broke single step
reporting. The original code reported the single step when TIF_SINGLESTEP
was set and TIF_SYSCALL_EMU was not set. The SYSCALL_WORK conversion got
the logic wrong and now the reporting only happens when both bits are set.
Restore the original behaviour.
[ tglx: Massaged changelog and dropped the pointless double negation ]
Fixes: 64eb35f701 ("ptrace: Migrate TIF_SYSCALL_EMU to use SYSCALL_WORK flag")
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/877do3gaq9.fsf@m5Zedd9JOGzJrf0
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
+x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
+jlfoJhMbtx5Gg==
=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
This is the same as syscall_exit_to_user_mode() but without calling
exit_to_user_mode(). This can be used if there is an architectural reason
to avoid the combo function, e.g. restarting a syscall without returning to
userspace. Before returning to user space the caller has to invoke
exit_to_user_mode().
[ tglx: Amended comments ]
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-6-svens@linux.ibm.com
Called from architecture specific code when syscall_exit_to_user_mode() is
not suitable. It simply calls __exit_to_user_mode().
This way __exit_to_user_mode() can still be inlined because it is declared
static __always_inline.
[ tglx: Amended comments and moved it to a different place in the header ]
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-5-svens@linux.ibm.com
To be called from architecture specific code if the combo interfaces are
not suitable. It simply calls __enter_from_user_mode(). This way
__enter_from_user_mode will still be inlined because it is declared static
__always_inline.
[ tglx: Amend comments and move it to a different location in the header ]
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-4-svens@linux.ibm.com
In order to make this function publicly available rename it so it can still
be inlined. An additional exit_to_user_mode() function will be added with
a later commit.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-3-svens@linux.ibm.com
In order to make this function publicly available rename it so it can still
be inlined. An additional enter_from_user_mode() function will be added with
a later commit.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201201142755.31931-2-svens@linux.ibm.com
Syscall User Dispatch (SUD) must take precedence over seccomp and
ptrace, since the use case is emulation (it can be invoked with a
different ABI) such that seccomp filtering by syscall number doesn't
make sense in the first place. In addition, either the syscall is
dispatched back to userspace, in which case there is no resource for to
trace, or the syscall will be executed, and seccomp/ptrace will execute
next.
Since SUD runs before tracepoints, it needs to be a SYSCALL_WORK_EXIT as
well, just to prevent a trace exit event when dispatch was triggered.
For that, the on_syscall_dispatch() examines context to skip the
tracepoint, audit and other work.
[ tglx: Add a comment on the exit side ]
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201127193238.821364-5-krisman@collabora.com
Instead of storing the map per CPU provide and use per task storage. That
prepares for local kmaps which are preemptible.
The context switch code is preparatory and not yet in use because
kmap_atomic() runs with preemption disabled. Will be made usable in the
next step.
The context switch logic is safe even when an interrupt happens after
clearing or before restoring the kmaps. The kmap index in task struct is
not modified so any nesting kmap in an interrupt will use unused indices
and on return the counter is the same as before.
Also add an assert into the return to user space code. Going back to user
space with an active kmap local is a nono.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201118204007.372935758@linutronix.de
Now that the flags migration in the common syscall entry code is complete
and the code relies exclusively on thread_info::syscall_work, clean up the
accesses to TI flags in that path.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-10-krisman@collabora.com
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_EMU, use it in the generic entry code and
convert the code which uses the TIF specific helper functions to use the
new *_syscall_work() helpers which either resolve to the new mode for users
of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-8-krisman@collabora.com
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_TRACE, use it in the generic entry code and
convert the code which uses the TIF specific helper functions to use the
new *_syscall_work() helpers which either resolve to the new mode for users
of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-7-krisman@collabora.com
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_TRACEPOINT, use it in the generic entry code
and convert the code which uses the TIF specific helper functions to use
the new *_syscall_work() helpers which either resolve to the new mode for
users of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-6-krisman@collabora.com
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert
the code which uses the TIF specific helper functions to use the new
*_syscall_work() helpers which either resolve to the new mode for users of
the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com
Prepare the common entry code to use the SYSCALL_WORK flags. They will
be defined in subsequent patches for each type of syscall
work. SYSCALL_WORK_ENTRY/EXIT are defined for the transition, as they
will replace the TIF_ equivalent defines.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-4-krisman@collabora.com
Lockdep state handling on NMI enter and exit is nothing specific to X86. It's
not any different on other architectures. Also the extra state type is not
necessary, irqentry_state_t can carry the necessary information as well.
Move it to common code and extend irqentry_state_t to carry lockdep state.
[ Ira: Make exit_rcu and lockdep a union as they are mutually exclusive
between the IRQ and NMI exceptions, and add kernel documentation for
struct irqentry_state_t ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201102205320.1458656-7-ira.weiny@intel.com
When an exception/interrupt hits kernel space and the kernel is not
currently in the idle task then RCU must be watching.
irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in
turn invokes lockdep when taking a lock. But at that point lockdep does not
yet know about the fact that interrupts have been disabled by the CPU,
which triggers a lockdep splat complaining about inconsistent state.
Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the
point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU.
So use the same sequence as for the idle case and tell lockdep about the
irq state change first, invoke the RCU check and then do the lockdep and
tracer update.
Fixes: a5497bab5f ("entry: Provide generic interrupt entry/exit code")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de
irq_enter_from_user_mode() was changed to irqentry_enter_from_user_mode().
Update the comment within irqentry_enter() to reflect this change.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201028163632.965518-1-ira.weiny@intel.com
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.
In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.
For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
All the callers currently do this, clean it up and move the clearing
into tracehook_notify_resume() instead.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=NYxb
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"Misc minor cleanups"
* tag 'x86_cleanups_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix typo in comments for syscall_enter_from_user_mode()
x86/resctrl: Fix spelling in user-visible warning messages
x86/entry/64: Do not include inst.h in calling.h
x86/mpparse: Remove duplicate io_apic.h include
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just to help myself and others with finding the correct function names,
fix a typo for "usermode" vs "user_mode".
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200919080936.259819-1-keescook@chromium.org
On v5.8 when doing seccomp syscall rewrites (e.g. getpid into getppid
as seen in the seccomp selftests), trace (and audit) correctly see the
rewritten syscall on entry and exit:
seccomp_bpf-1307 [000] .... 22974.874393: sys_enter: NR 110 (...
seccomp_bpf-1307 [000] .N.. 22974.874401: sys_exit: NR 110 = 1304
With mainline we see a mismatched enter and exit (the original syscall
is incorrectly visible on entry):
seccomp_bpf-1030 [000] .... 21.806766: sys_enter: NR 39 (...
seccomp_bpf-1030 [000] .... 21.806767: sys_exit: NR 110 = 1027
When ptrace or seccomp change the syscall, this needs to be visible to
trace and audit at that time as well. Update the syscall earlier so they
see the correct value.
Fixes: d88d59b64c ("core/entry: Respect syscall number rewrites")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200912005826.586171-1-keescook@chromium.org
Andy reported that the syscall treacing for 32bit fast syscall fails:
# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...
Unbreak it by providing a split up version of syscall_enter_from_user_mode().
- syscall_enter_from_user_mode_prepare() establishes state and enables
interrupts
- syscall_enter_from_user_mode_work() runs the entry work
Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.
Fixes: 27d6b4d14f ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
The x86/entry work removed all uses of __rcu_is_watching(), therefore
this commit removes it entirely.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.
Reload the syscall number to fix that.
Fixes: 142781e108 ("entry: Provide generic syscall entry functionality")
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87blj6ifo8.fsf@nanos.tec.linutronix.de
The noinstr attribute is to be specified before the return type in the
same way 'inline' is used.
Similar cases were recently fixed for x86 in commit 7f6fa101df ("x86:
Correct noinstr qualifiers"), but the generic entry code was based on the
the original version and did not carry the fix over.
Fixes: a5497bab5f ("entry: Provide generic interrupt entry/exit code")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200725091951.744848-3-mingo@kernel.org
Like the syscall entry/exit code interrupt/exception entry after the real
low level ASM bits should not be different accross architectures.
Provide a generic version based on the x86 code.
irqentry_enter() is called after the low level entry code and
irqentry_exit() must be invoked right before returning to the low level
code which just contains the actual return logic. The code before
irqentry_enter() and irqentry_exit() must not be instrumented. Code after
irqentry_enter() and before irqentry_exit() can be instrumented.
irqentry_enter() invokes irqentry_enter_from_user_mode() if the
interrupt/exception came from user mode. If if entered from kernel mode it
handles the kernel mode variant of establishing state for lockdep, RCU and
tracing depending on the kernel context it interrupted (idle, non-idle).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220519.723703209@linutronix.de
Like syscall entry all architectures have similar and pointlessly different
code to handle pending work before returning from a syscall to user space.
1) One-time syscall exit work:
- rseq syscall exit
- audit
- syscall tracing
- tracehook (single stepping)
2) Preparatory work
- Exit to user mode loop (common TIF handling).
- Architecture specific one time work arch_exit_to_user_mode_prepare()
- Address limit and lockdep checks
3) Final transition (lockdep, tracing, context tracking, RCU). Invokes
arch_exit_to_user_mode() to handle e.g. speculation mitigations
Provide a generic version based on the x86 code which has all the RCU and
instrumentation protections right.
Provide a variant for interrupt return to user mode as well which shares
the above #2 and #3 work items.
After syscall_exit_to_user_mode() and irqentry_exit_to_user_mode() the
architecture code just has to return to user space. The code after
returning from these functions must not be instrumented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220519.613977173@linutronix.de
On syscall entry certain work needs to be done:
- Establish state (lockdep, context tracking, tracing)
- Conditional work (ptrace, seccomp, audit...)
This code is needlessly duplicated and different in all
architectures.
Provide a generic version based on the x86 implementation which has all the
RCU and instrumentation bits right.
As interrupt/exception entry from user space needs parts of the same
functionality, provide a function for this as well.
syscall_enter_from_user_mode() and irqentry_enter_from_user_mode() must be
called right after the low level ASM entry. The calling code must be
non-instrumentable. After the functions returns state is correct and the
subsequent functions can be instrumented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200722220519.513463269@linutronix.de
Yuxuan Shui
Linus Torvalds
Sven Schnelle
Gabriel Krisman Bertazi
Thomas Gleixner
Ira Weiny
Jens Axboe
Ingo Molnar
Kees Cook
Paul E. McKenney