Граф коммитов

282 Коммитов

Автор SHA1 Сообщение Дата
Miklos Szeredi 7c6893e3c9 ovl: don't allow writing ioctl on lower layer
Problem with ioctl() is that it's a file operation, yet often used as an
inode operation (i.e. modify the inode despite the file being opened for
read-only).

mnt_want_write_file() is used by filesystems in such cases to get write
access on an arbitrary open file.

Since overlayfs lets filesystems do all file operations, including ioctl,
this can lead to mnt_want_write_file() returning OK for a lower file and
modification of that lower file.

This patch prevents modification by checking if the file is from an
overlayfs lower layer and returning EPERM in that case.

Need to introduce a mnt_want_write_file_path() variant that still does the
old thing for inode operations that can do the copy up + modification
correctly in such cases (fchown, fsetxattr, fremovexattr).

This does not address the correctness of such ioctls on overlayfs (the
correct way would be to copy up and attempt to perform ioctl on upper
file).

In theory this could be a regression.  We very much hope that nobody is
relying on such a hack in any sane setup.

While this patch meddles in VFS code, it has no effect on non-overlayfs
filesystems.

Reported-by: "zhangyi (F)" <yi.zhang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-05 12:53:12 +02:00
Miklos Szeredi 495e642939 vfs: add flags to d_real()
Add a separate flags argument (in addition to the open flags) to control
the behavior of d_real().

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-04 21:42:22 +02:00
Linus Torvalds 088737f44b Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXhmCAAoJEAAOaEEZVoIVpRkP/1qlYn3pq6d5Kuz84pejOmlL
 5jbkS/cOmeTxeUU4+B1xG8Lx7bAk8PfSXQOADbSJGiZd0ug95tJxplFYIGJzR/tG
 aNMHeu/BVKKhUKORGuKR9rJKtwC839L/qao+yPBo5U3mU4L73rFWX8fxFuhSJ8HR
 hvkgBu3Hx6GY59CzxJ8iJzj+B+uPSFrNweAk0+0UeWkBgTzEdiGqaXBX4cHIkq/5
 hMoCG+xnmwHKbCBsQ5js+YJT+HedZ4lvfjOqGxgElUyjJ7Bkt/IFYOp8TUiu193T
 tA4UinDjN8A7FImmIBIftrECmrAC9HIGhGZroYkMKbb8ReDR2ikE5FhKEpuAGU3a
 BXBgX2mPQuArvZWM7qeJCkxV9QJ0u/8Ykbyzo30iPrICyrzbEvIubeB/mDA034+Z
 Z0/z8C3v7826F3zP/NyaQEojUgRq30McMOIS8GMnx15HJwRsRKlzjfy9Wm4tWhl0
 t3nH1jMqAZ7068s6rfh/oCwdgGOwr5o4hW/bnlITzxbjWQUOnZIe7KBxIezZJ2rv
 OcIwd5qE8PNtpagGj5oUbnjGOTkERAgsMfvPk5tjUNt28/qUlVs2V0aeo47dlcsh
 oYr8WMOIzw98Rl7Bo70mplLrqLD6nGl0LfXOyUlT4STgLWW4ksmLVuJjWIUxcO/0
 yKWjj9wfYRQ0vSUqhsI5
 =3Z93
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull Writeback error handling updates from Jeff Layton:
 "This pile represents the bulk of the writeback error handling fixes
  that I have for this cycle. Some of the earlier patches in this pile
  may look trivial but they are prerequisites for later patches in the
  series.

  The aim of this set is to improve how we track and report writeback
  errors to userland. Most applications that care about data integrity
  will periodically call fsync/fdatasync/msync to ensure that their
  writes have made it to the backing store.

  For a very long time, we have tracked writeback errors using two flags
  in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
  writeback error occurs (via mapping_set_error) and are cleared as a
  side-effect of filemap_check_errors (as you noted yesterday). This
  model really sucks for userland.

  Only the first task to call fsync (or msync or fdatasync) will see the
  error. Any subsequent task calling fsync on a file will get back 0
  (unless another writeback error occurs in the interim). If I have
  several tasks writing to a file and calling fsync to ensure that their
  writes got stored, then I need to have them coordinate with one
  another. That's difficult enough, but in a world of containerized
  setups that coordination may even not be possible.

  But wait...it gets worse!

  The calls to filemap_check_errors can be buried pretty far down in the
  call stack, and there are internal callers of filemap_write_and_wait
  and the like that also end up clearing those errors. Many of those
  callers ignore the error return from that function or return it to
  userland at nonsensical times (e.g. truncate() or stat()). If I get
  back -EIO on a truncate, there is no reason to think that it was
  because some previous writeback failed, and a subsequent fsync() will
  (incorrectly) return 0.

  This pile aims to do three things:

   1) ensure that when a writeback error occurs that that error will be
      reported to userland on a subsequent fsync/fdatasync/msync call,
      regardless of what internal callers are doing

   2) report writeback errors on all file descriptions that were open at
      the time that the error occurred. This is a user-visible change,
      but I think most applications are written to assume this behavior
      anyway. Those that aren't are unlikely to be hurt by it.

   3) document what filesystems should do when there is a writeback
      error. Today, there is very little consistency between them, and a
      lot of cargo-cult copying. We need to make it very clear what
      filesystems should do in this situation.

  To achieve this, the set adds a new data type (errseq_t) and then
  builds new writeback error tracking infrastructure around that. Once
  all of that is in place, we change the filesystems to use the new
  infrastructure for reporting wb errors to userland.

  Note that this is just the initial foray into cleaning up this mess.
  There is a lot of work remaining here:

   1) convert the rest of the filesystems in a similar fashion. Once the
      initial set is in, then I think most other fs' will be fairly
      simple to convert. Hopefully most of those can in via individual
      filesystem trees.

   2) convert internal waiters on writeback to use errseq_t for
      detecting errors instead of relying on the AS_* flags. I have some
      draft patches for this for ext4, but they are not quite ready for
      prime time yet.

  This was a discussion topic this year at LSF/MM too. If you're
  interested in the gory details, LWN has some good articles about this:

      https://lwn.net/Articles/718734/
      https://lwn.net/Articles/724307/"

* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  btrfs: minimal conversion to errseq_t writeback error reporting on fsync
  xfs: minimal conversion to errseq_t writeback error reporting
  ext4: use errseq_t based error handling for reporting data writeback errors
  fs: convert __generic_file_fsync to use errseq_t based reporting
  block: convert to errseq_t based writeback error tracking
  dax: set errors in mapping when writeback fails
  Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
  mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
  fs: new infrastructure for writeback error handling and reporting
  lib: add errseq_t type and infrastructure for handling it
  mm: don't TestClearPageError in __filemap_fdatawait_range
  mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
  jbd2: don't clear and reset errors after waiting on writeback
  buffer: set errors in mapping at the time that the error occurs
  fs: check for writeback errors after syncing out buffers in generic_file_fsync
  buffer: use mapping_set_error instead of setting the flag
  mm: fix mapping_set_error call in me_pagecache_dirty
2017-07-07 19:38:17 -07:00
Jeff Layton 5660e13d2f fs: new infrastructure for writeback error handling and reporting
Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.

The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.

If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.

This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.

In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.

One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.

This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.

This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).

Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.

The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 07:02:25 -04:00
Jens Axboe c75b1d9421 fs: add fcntl() interface for setting/getting write life time hints
Define a set of write life time hints:

RWH_WRITE_LIFE_NOT_SET	No hint information set
RWH_WRITE_LIFE_NONE	No hints about write life time
RWH_WRITE_LIFE_SHORT	Data written has a short life time
RWH_WRITE_LIFE_MEDIUM	Data written has a medium life time
RWH_WRITE_LIFE_LONG	Data written has a long life time
RWH_WRITE_LIFE_EXTREME	Data written has an extremely long life time

The intent is for these values to be relative to each other, no
absolute meaning should be attached to these flag names.

Add an fcntl interface for querying these flags, and also for
setting them as well:

F_GET_RW_HINT		Returns the read/write hint set on the
			underlying inode.

F_SET_RW_HINT		Set one of the above write hints on the
			underlying inode.

F_GET_FILE_RW_HINT	Returns the read/write hint set on the
			file descriptor.

F_SET_FILE_RW_HINT	Set one of the above write hints on the
			file descriptor.

The user passes in a 64-bit pointer to get/set these values, and
the interface returns 0/-1 on success/error.

Sample program testing/implementing basic setting/getting of write
hints is below.

Add support for storing the write life time hint in the inode flags
and in struct file as well, and pass them to the kiocb flags. If
both a file and its corresponding inode has a write hint, then we
use the one in the file, if available. The file hint can be used
for sync/direct IO, for buffered writeback only the inode hint
is available.

This is in preparation for utilizing these hints in the block layer,
to guide on-media data placement.

/*
 * writehint.c: get or set an inode write hint
 */
 #include <stdio.h>
 #include <fcntl.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <stdbool.h>
 #include <inttypes.h>

 #ifndef F_GET_RW_HINT
 #define F_LINUX_SPECIFIC_BASE	1024
 #define F_GET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 11)
 #define F_SET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 12)
 #endif

static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE",
			"RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM",
			"RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" };

int main(int argc, char *argv[])
{
	uint64_t hint;
	int fd, ret;

	if (argc < 2) {
		fprintf(stderr, "%s: file <hint>\n", argv[0]);
		return 1;
	}

	fd = open(argv[1], O_RDONLY);
	if (fd < 0) {
		perror("open");
		return 2;
	}

	if (argc > 2) {
		hint = atoi(argv[2]);
		ret = fcntl(fd, F_SET_RW_HINT, &hint);
		if (ret < 0) {
			perror("fcntl: F_SET_RW_HINT");
			return 4;
		}
	}

	ret = fcntl(fd, F_GET_RW_HINT, &hint);
	if (ret < 0) {
		perror("fcntl: F_GET_RW_HINT");
		return 3;
	}

	printf("%s: hint %s\n", argv[1], str[hint]);
	close(fd);
	return 0;
}

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 12:05:22 -06:00
Linus Torvalds 050453295f Merge branch 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Making sure that something like a referral point won't end up as pwd
  or root.

  The main part is the last commit (fixing mntns_install()); that one
  fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
  bit more robust - it should be impossible to get opened files (even
  O_PATH ones) for referral points in the first place, so the existing
  checks are OK, but checking the same thing as in chdir(2) is just as
  cheap.

  The path_init() commit removes a redundant check that shouldn't have
  been there in the first place"

* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make sure that mntns_install() doesn't end up with referral for root
  path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
  make sure that fchdir() won't accept referral points, etc.
2017-05-12 11:39:59 -07:00
Linus Torvalds b948abf53a Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
 "The biggest part of this is making st_dev/st_ino on the overlay behave
  like a normal filesystem (i.e. st_ino doesn't change on copy up,
  st_dev is the same for all files and directories). Currently this only
  works if all layers are on the same filesystem, but future work will
  move the general case towards more sane behavior.

  There are also miscellaneous fixes, including fixes to handling
  append-only files. There's a small change in the VFS, but that only
  has an effect on overlayfs, since otherwise file->f_path.dentry->inode
  and file_inode(file) are always the same"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: update documentation w.r.t. constant inode numbers
  ovl: persistent inode numbers for upper hardlinks
  ovl: merge getattr for dir and nondir
  ovl: constant st_ino/st_dev across copy up
  ovl: persistent inode number for directories
  ovl: set the ORIGIN type flag
  ovl: lookup non-dir copy-up-origin by file handle
  ovl: use an auxiliary var for overlay root entry
  ovl: store file handle of lower inode on copy up
  ovl: check if all layers are on the same fs
  ovl: do not set overlay.opaque on non-dir create
  ovl: check IS_APPEND() on real upper inode
  vfs: ftruncate check IS_APPEND() on real upper inode
  ovl: Use designated initializers
  ovl: lockdep annotate of nested stacked overlayfs inode lock
2017-05-10 09:03:48 -07:00
Linus Torvalds 11fbf53d66 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Assorted bits and pieces from various people. No common topic in this
  pile, sorry"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/affs: add rename exchange
  fs/affs: add rename2 to prepare multiple methods
  Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()
  fs: don't set *REFERENCED on single use objects
  fs: compat: Remove warning from COMPATIBLE_IOCTL
  remove pointless extern of atime_need_update_rcu()
  fs: completely ignore unknown open flags
  fs: add a VALID_OPEN_FLAGS
  fs: remove _submit_bh()
  fs: constify tree_descr arrays passed to simple_fill_super()
  fs: drop duplicate header percpu-rwsem.h
  fs/affs: bugfix: Write files greater than page size on OFS
  fs/affs: bugfix: enable writes on OFS disks
  fs/affs: remove node generation check
  fs/affs: import amigaffs.h
  fs/affs: bugfix: make symbolic links work again
2017-05-09 09:12:53 -07:00
Christoph Hellwig 629e014bb8 fs: completely ignore unknown open flags
Currently we just stash anything we got into file->f_flags, and the
report it in fcntl(F_GETFD).  This patch just clears out all unknown
flags so that we don't pass them to the fs or report them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-27 05:13:04 -04:00
Al Viro 159b095628 make sure that fchdir() won't accept referral points, etc.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-21 14:05:35 -04:00
Amir Goldstein 78757af651 vfs: ftruncate check IS_APPEND() on real upper inode
ftruncate an overlayfs inode was checking IS_APPEND() on
overlay inode, but overlay inode does not have the S_APPEND flag.

Check IS_APPEND() on real upper inode instead.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-20 16:37:26 +02:00
Al Viro e35d49f637 open: move compat syscalls from compat.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-17 12:52:25 -04:00
Amir Goldstein bfe219d373 vfs: wrap write f_ops with file_{start,end}_write()
Before calling write f_ops, call file_start_write() instead
of sb_start_write().

Replace {sb,file}_start_write() for {copy,clone}_file_range() and
for fallocate().

Beyond correct semantics, this avoids freeze protection to sb when
operating on special inodes, such as fallocate() on a blockdev.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-02-07 15:05:04 +01:00
Amir Goldstein 9e79b13263 vfs: deny fallocate() on directory
There was an obscure use case of fallocate of directory inode
in the vfs helper with the comment:
"Let individual file system decide if it supports preallocation
 for directories or not."

But there is no in-tree file system that implements fallocate
for directory operations.

Deny an attempt to fallocate a directory with EISDIR error.

This change is needed prior to converting sb_start_write()
to  file_start_write(), so freeze protection is correctly
handled for cases of fallocate file and blockdev.

Cc: linux-api@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-02-07 15:05:04 +01:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Linus Torvalds 35a891be96 xfs: reflink update for 4.9-rc1
< XFS has gained super CoW powers! >
  ----------------------------------
         \   ^__^
          \  (oo)\_______
             (__)\       )\/\
                 ||----w |
                 ||     ||
 
 Included in this update:
 - unshare range (FALLOC_FL_UNSHARE) support for fallocate
 - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr interface
 - shared extent support for XFS
 - copy-on-write support for shared extents
 - copy_file_range support
 - clone_file_range support (implements reflink)
 - dedupe_file_range support
 - defrag support for reverse mapping enabled filesystems
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/hrZAAoJEK3oKUf0dfodpwcQAKkTerNPhhDcthqWUJ2+jC7w
 JIuhKUg2GYojJhIJ4+Ue1knmuBeIusda+PzGls+6gdy7GDGdux/esRIJSe1W7A5G
 RNeumiSKVX5iYsZNUEX35O2a/SwUM1Sm5mcIFs4CxUwIRwE/cayNby6vrlVExvz7
 Ns6YYOI2bldUHLsxedg8MLG0it1JGTADB9gwGgb98bxQ3bD/UBn3TF9xTlj+ZH22
 ebnWsogSJOnUigOOSGeaQsmy1pJAhRIhvt+f481KuZak1pdQcK2feL4RcKw0NpNt
 15LCYRqX6RexC684VYgJZxXB4EKyfS2Bma71q41A7dz1x36kw7+wG18xasBqU++p
 GZwwL6si02rIGPMz1oD8xxZ0F97ADCGRmkgUHsCJKbP5UmGiP08K6GEN3osr5hAN
 xAmn9AxcprXVnV3WmnFxpBeWY/qCEsvSQqJuKSThYqAilqUc8wN2u5g/eEpE6mmg
 KEEhzaq5P4ovS/HOIQJWdBu1j5E9Mg2o/ncy87Q6uE+9Fa5AAP6GBWOtGcMwdFSU
 adbN7dqjgoHMyNHFrmePqyJYtOZ2hZovDlVndxnYysl5ZBfiBEEDISmr+x6KcSlo
 3kyOltYQLjEVu1sLOT3COCddn0jt5Lr1QhGeVepnrMlU2E1h4461viCNMDinJRIp
 OYoMOS+J83G2FEFwgXYM
 =Sa+Y
 -----END PGP SIGNATURE-----

Merge tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

    < XFS has gained super CoW powers! >
     ----------------------------------
            \   ^__^
             \  (oo)\_______
                (__)\       )\/\
                    ||----w |
                    ||     ||

Pull XFS support for shared data extents from Dave Chinner:
 "This is the second part of the XFS updates for this merge cycle.  This
  pullreq contains the new shared data extents feature for XFS.

  Given the complexity and size of this change I am expecting - like the
  addition of reverse mapping last cycle - that there will be some
  follow-up bug fixes and cleanups around the -rc3 stage for issues that
  I'm sure will show up once the code hits a wider userbase.

  What it is:

  At the most basic level we are simply adding shared data extents to
  XFS - i.e. a single extent on disk can now have multiple owners. To do
  this we have to add new on-disk features to both track the shared
  extents and the number of times they've been shared. This is done by
  the new "refcount" btree that sits in every allocation group. When we
  share or unshare an extent, this tree gets updated.

  Along with this new tree, the reverse mapping tree needs to be updated
  to track each owner or a shared extent. This also needs to be updated
  ever share/unshare operation. These interactions at extent allocation
  and freeing time have complex ordering and recovery constraints, so
  there's a significant amount of new intent-based transaction code to
  ensure that operations are performed atomically from both the runtime
  and integrity/crash recovery perspectives.

  We also need to break sharing when writes hit a shared extent - this
  is where the new copy-on-write implementation comes in. We allocate
  new storage and copy the original data along with the overwrite data
  into the new location. We only do this for data as we don't share
  metadata at all - each inode has it's own metadata that tracks the
  shared data extents, the extents undergoing CoW and it's own private
  extents.

  Of course, being XFS, nothing is simple - we use delayed allocation
  for CoW similar to how we use it for normal writes. ENOSPC is a
  significant issue here - we build on the reservation code added in
  4.8-rc1 with the reverse mapping feature to ensure we don't get
  spurious ENOSPC issues part way through a CoW operation. These
  mechanisms also help minimise fragmentation due to repeated CoW
  operations. To further reduce fragmentation overhead, we've also
  introduced a CoW extent size hint, which indicates how large a region
  we should allocate when we execute a CoW operation.

  With all this functionality in place, we can hook up .copy_file_range,
  .clone_file_range and .dedupe_file_range and we gain all the
  capabilities of reflink and other vfs provided functionality that
  enable manipulation to shared extents. We also added a fallocate mode
  that explicitly unshares a range of a file, which we implemented as an
  explicit CoW of all the shared extents in a file.

  As such, it's a huge chunk of new functionality with new on-disk
  format features and internal infrastructure. It warns at mount time as
  an experimental feature and that it may eat data (as we do with all
  new on-disk features until they stabilise). We have not released
  userspace suport for it yet - userspace support currently requires
  download from Darrick's xfsprogs repo and build from source, so the
  access to this feature is really developer/tester only at this point.
  Initial userspace support will be released at the same time the kernel
  with this code in it is released.

  The new code causes 5-6 new failures with xfstests - these aren't
  serious functional failures but things the output of tests changing
  slightly due to perturbations in layouts, space usage, etc. OTOH,
  we've added 150+ new tests to xfstests that specifically exercise this
  new functionality so it's got far better test coverage than any
  functionality we've previously added to XFS.

  Darrick has done a pretty amazing job getting us to this stage, and
  special mention also needs to go to Christoph (review, testing,
  improvements and bug fixes) and Brian (caught several intricate bugs
  during review) for the effort they've also put in.

  Summary:

   - unshare range (FALLOC_FL_UNSHARE) support for fallocate

   - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr
     interface

   - shared extent support for XFS

   - copy-on-write support for shared extents

   - copy_file_range support

   - clone_file_range support (implements reflink)

   - dedupe_file_range support

   - defrag support for reverse mapping enabled filesystems"

* tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (71 commits)
  xfs: convert COW blocks to real blocks before unwritten extent conversion
  xfs: rework refcount cow recovery error handling
  xfs: clear reflink flag if setting realtime flag
  xfs: fix error initialization
  xfs: fix label inaccuracies
  xfs: remove isize check from unshare operation
  xfs: reduce stack usage of _reflink_clear_inode_flag
  xfs: check inode reflink flag before calling reflink functions
  xfs: implement swapext for rmap filesystems
  xfs: refactor swapext code
  xfs: various swapext cleanups
  xfs: recognize the reflink feature bit
  xfs: simulate per-AG reservations being critically low
  xfs: don't mix reflink and DAX mode for now
  xfs: check for invalid inode reflink flags
  xfs: set a default CoW extent size of 32 blocks
  xfs: convert unwritten status of reverse mappings for shared files
  xfs: use interval query for rmap alloc operations on shared files
  xfs: add shared rmap map/unmap/convert log item types
  xfs: increase log reservations for reflink
  ...
2016-10-13 20:28:22 -07:00
Darrick J. Wong 25f4c41415 block: implement (some of) fallocate for block devices
After much discussion, it seems that the fallocate feature flag
FALLOC_FL_ZERO_RANGE maps nicely to SCSI WRITE SAME; and the feature
FALLOC_FL_PUNCH_HOLE maps nicely to the devices that have been whitelisted
for zeroing SCSI UNMAP.  Punch still requires that FALLOC_FL_KEEP_SIZE is
set.  A length that goes past the end of the device will be clamped to the
device size if KEEP_SIZE is set; or will return -EINVAL if not.  Both
start and length must be aligned to the device's logical block size.

Since the semantics of fallocate are fairly well established already, wire
up the two pieces.  The other fallocate variants (collapse range, insert
range, and allocate blocks) are not supported.

Link: http://lkml.kernel.org/r/147518379992.22791.8849838163218235007.stgit@birch.djwong.org
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header
Cc: Brian Foster <bfoster@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:30 -07:00
Darrick J. Wong 71be6b4942 vfs: add a FALLOC_FL_UNSHARE mode to fallocate to unshare a range of blocks
Add a new fallocate mode flag that explicitly unshares blocks on
filesystems that support such features.  The new flag can only
be used with an allocate-mode fallocate call.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2016-10-03 09:11:14 -07:00
Miklos Szeredi 4d0c5ba2ff vfs: do get_write_access() on upper layer of overlayfs
The problem with writecount is: we want consistent handling of it for
underlying filesystems as well as overlayfs.  Making sure i_writecount is
correct on all layers is difficult.  Instead this patch makes sure that
when write access is acquired, it's always done on the underlying writable
layer (called the upper layer).  We must also make sure to look at the
writecount on this layer when checking for conflicting leases.

Open for write already updates the upper layer's writecount.  Leaving only
truncate.

For truncate copy up must happen before get_write_access() so that the
writecount is updated on the upper layer.  Problem with this is if
something fails after that, then copy-up was done needlessly.  E.g. if
break_lease() was interrupted.  Probably not a big deal in practice.

Another interesting case is if there's a denywrite on a lower file that is
then opened for write or truncated.  With this patch these will succeed,
which is somewhat counterintuitive.  But I think it's still acceptable,
considering that the copy-up does actually create a different file, so the
old, denywrite mapping won't be touched.

On non-overlayfs d_real() is an identity function and d_real_inode() is
equivalent to d_inode() so this patch doesn't change behavior in that case.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
2016-09-16 12:44:21 +02:00
Miklos Szeredi c568d68341 locks: fix file locking on overlayfs
This patch allows flock, posix locks, ofd locks and leases to work
correctly on overlayfs.

Instead of using the underlying inode for storing lock context use the
overlay inode.  This allows locks to be persistent across copy-up.

This is done by introducing locks_inode() helper and using it instead of
file_inode() to get the inode in locking code.  For non-overlayfs the two
are equivalent, except for an extra pointer dereference in locks_inode().

Since lock operations are in "struct file_operations" we must also make
sure not to call underlying filesystem's lock operations.  Introcude a
super block flag MS_NOREMOTELOCK to this effect.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
2016-09-16 12:44:20 +02:00
Linus Torvalds e9d488c311 binfmt_misc for-linus on 20160727
First off, the intention of this pull is to declare that I'll be the
 binfmt_misc maintainer (mainly on the grounds of you touched it last,
 it's yours).  There's no MAINTAINERS entry, but get_maintainers.pl
 will now finger me.
 
 The update itself is to allow architecture emulation containers to
 function such that the emulation binary can be housed outside the
 container itself.  The container and fs parts both have acks from
 relevant experts.
 
 The change is user visible. To use the new feature you have to add an
 F option to your binfmt_misc configuration.  However, the existing
 tools, like systemd-binfmt work with this without modification.
 
 Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJXmW5WAAoJEAVr7HOZEZN4K1QQAKgx5MPkoTU3QKKgzaMBBnWH
 pSMdoN8BhVSwENE/YJGMEyLaRa0zmrHVtFcnH2CHQE/GoXNnaej9l3LtBIwJ9K2P
 nrv4Rlhla5BxjhDkg8IWf3iG7iKDDHGZoyuVPx4dwxHFK1yCNH4SDeHaJCKK5qsC
 aLltMJMRnjsgJvBUC01dCUlp8srkWywHcyk9M9ic/Fr5vJ6JzdUr6/Md29eHmAXe
 NgCGwkVgSDiKfnTGZjIMsAtpwPsJ6RqBWQTcTdM/mkIpqwrMiVuaVOHqu2cmMU2i
 j4cQE6rQpy3sedDKZbHBQMOfYJNT4QYgYGuvyIWce9EPkIpOWHzQ7kYPJ/A/jZCE
 lN37TeyodbUDCnyuKk1YOrTBjJ0qdtc4FXJ1aq5s92GkgDs+LtxMdGzKDf3yUGiU
 W0TsE/wVy4rmEaeiyut33661ud4vivP4WklWK1Y+bklQcIcKQKKWnOCnDFDR5vuz
 CbL5ykVcJb3F28YhGYHvGLeXl0YcR3SwngWnnPCDPtBCeSirohuKb1SEe21C/RaB
 rm9S27d+LcKCXJyCqKh8BGsqroZ0iSZQI0Lbdqt+BCuuBw2rQhGStDeccDDUp9jg
 MOwpQwabjEseK0n75+hZ2SFS5Q+TQ6pccMlUJIDiBKWmRly8NpKlSKKWvBX8obIe
 0Gq6hgX1IwQnXI1O8QMC
 =6OjN
 -----END PGP SIGNATURE-----

Merge tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc

Pull binfmt_misc update from James Bottomley:
 "This update is to allow architecture emulation containers to function
  such that the emulation binary can be housed outside the container
  itself.  The container and fs parts both have acks from relevant
  experts.

  To use the new feature you have to add an F option to your binfmt_misc
  configuration"

From the docs:
 "The usual behaviour of binfmt_misc is to spawn the binary lazily when
  the misc format file is invoked.  However, this doesn't work very well
  in the face of mount namespaces and changeroots, so the F mode opens
  the binary as soon as the emulation is installed and uses the opened
  image to spawn the emulator, meaning it is always available once
  installed, regardless of how the environment changes"

* tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc:
  binfmt_misc: add F option description to documentation
  binfmt_misc: add persistent opened binary handler for containers
  fs: add filp_clone_open API
2016-08-07 10:13:14 -04:00
Miklos Szeredi 2d902671ce vfs: merge .d_select_inode() into .d_real()
The two methods essentially do the same: find the real dentry/inode
belonging to an overlay dentry.  The difference is in the usage:

vfs_open() uses ->d_select_inode() and expects the function to perform
copy-up if necessary based on the open flags argument.

file_dentry() uses ->d_real() passing in the overlay dentry as well as the
underlying inode.

vfs_rename() uses ->d_select_inode() but passes zero flags.  ->d_real()
with a zero inode would have worked just as well here.

This patch merges the functionality of ->d_select_inode() into ->d_real()
by adding an 'open_flags' argument to the latter.

[Al Viro] Make the signature of d_real() match that of ->d_real() again.
And constify the inode argument, while we are at it.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-30 08:53:27 +02:00
Linus Torvalds c52b76185b Merge branch 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct path' constification update from Al Viro:
 "'struct path' is passed by reference to a bunch of Linux security
  methods; in theory, there's nothing to stop them from modifying the
  damn thing and LSM community being what it is, sooner or later some
  enterprising soul is going to decide that it's a good idea.

  Let's remove the temptation and constify all of those..."

* 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify ima_d_path()
  constify security_sb_pivotroot()
  constify security_path_chroot()
  constify security_path_{link,rename}
  apparmor: remove useless checks for NULL ->mnt
  constify security_path_{mkdir,mknod,symlink}
  constify security_path_{unlink,rmdir}
  apparmor: constify common_perm_...()
  apparmor: constify aa_path_link()
  apparmor: new helper - common_path_perm()
  constify chmod_common/security_path_chmod
  constify security_sb_mount()
  constify chown_common/security_path_chown
  tomoyo: constify assorted struct path *
  apparmor_path_truncate(): path->mnt is never NULL
  constify vfs_truncate()
  constify security_path_truncate()
  [apparmor] constify struct path * in a bunch of helpers
2016-05-17 14:41:03 -07:00
Al Viro 0e0162bb8c Merge branch 'ovl-fixes' into for-linus
Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
2016-05-17 02:17:59 -04:00
Miklos Szeredi 54d5ca871e vfs: add vfs_select_inode() helper
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.2+
2016-05-10 23:55:01 -04:00
Al Viro 63b6df1413 give readdir(2)/getdents(2)/etc. uniform exclusion with lseek()
same as read() on regular files has, and for the same reason.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-02 19:49:28 -04:00
James Bottomley 9a08c352d0 fs: add filp_clone_open API
I need an API that allows me to obtain a clone of the current file
pointer to pass in to an exec handler.  I've labelled this as an
internal API because I can't see how it would be useful outside of the
fs subsystem.  The use case will be a persistent binfmt_misc handler.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.cz>
2016-03-30 14:12:22 -07:00
Al Viro be01f9f28e constify chmod_common/security_path_chmod
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:25 -04:00
Al Viro 7fd25dac9a constify chown_common/security_path_chown
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:24 -04:00
Al Viro 7df818b237 constify vfs_truncate()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:22 -04:00
Jann Horn 378c6520e7 fs/coredump: prevent fsuid=0 dumps into user-controlled directories
This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:

 - The fs.suid_dumpable sysctl is set to 2.
 - The kernel.core_pattern sysctl's value starts with "/". (Systems
   where kernel.core_pattern starts with "|/" are not affected.)
 - Unprivileged user namespace creation is permitted. (This is
   true on Linux >=3.8, but some distributions disallow it by
   default using a distro patch.)

Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.

To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.

Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Al Viro 62fb4a155f don't carry MAY_OPEN in op->acc_mode
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:28:40 -05:00
Eric W. Biederman 90f8572b0f vfs: Commit to never having exectuables on proc and sysfs.
Today proc and sysfs do not contain any executable files.  Several
applications today mount proc or sysfs without noexec and nosuid and
then depend on there being no exectuables files on proc or sysfs.
Having any executable files show on proc or sysfs would cause
a user space visible regression, and most likely security problems.

Therefore commit to never allowing executables on proc and sysfs by
adding a new flag to mark them as filesystems without executables and
enforce that flag.

Test the flag where MNT_NOEXEC is tested today, so that the only user
visible effect will be that exectuables will be treated as if the
execute bit is cleared.

The filesystems proc and sysfs do not currently incoporate any
executable files so this does not result in any user visible effects.

This makes it unnecessary to vet changes to proc and sysfs tightly for
adding exectuable files or changes to chattr that would modify
existing files, as no matter what the individual file say they will
not be treated as exectuable files by the vfs.

Not having to vet changes to closely is important as without this we
are only one proc_create call (or another goof up in the
implementation of notify_change) from having problematic executables
on proc.  Those mistakes are all too easy to make and would create
a situation where there are security issues or the assumptions of
some program having to be broken (and cause userspace regressions).

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-10 10:39:25 -05:00
Jan Kara 45f147a1bc fs: Call security_ops->inode_killpriv on truncate
Comment in include/linux/security.h says that ->inode_killpriv() should
be called when setuid bit is being removed and that similar security
labels (in fact this applies only to file capabilities) should be
removed at this time as well. However we don't call ->inode_killpriv()
when we remove suid bit on truncate.

We fix the problem by calling ->inode_need_killpriv() and subsequently
->inode_killpriv() on truncate the same way as we do it on file write.

After this patch there's only one user of should_remove_suid() - ocfs2 -
and indeed it's buggy because it doesn't call ->inode_killpriv() on
write. However fixing it is difficult because of special locking
constraints.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-23 18:01:09 -04:00
Miklos Szeredi 9bf39ab2ad vfs: add file_path() helper
Turn
	d_path(&file->f_path, ...);
into
	file_path(file, ...);

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-23 18:00:05 -04:00
David Howells 4bacc9c923 overlayfs: Make f_path always point to the overlay and f_inode to the underlay
Make file->f_path always point to the overlay dentry so that the path in
/proc/pid/fd is correct and to ensure that label-based LSMs have access to the
overlay as well as the underlay (path-based LSMs probably don't need it).

Using my union testsuite to set things up, before the patch I see:

	[root@andromeda union-testsuite]# bash 5</mnt/a/foo107
	[root@andromeda union-testsuite]# ls -l /proc/$$/fd/
	...
	lr-x------. 1 root root 64 Jun  5 14:38 5 -> /a/foo107
	[root@andromeda union-testsuite]# stat /mnt/a/foo107
	...
	Device: 23h/35d Inode: 13381       Links: 1
	...
	[root@andromeda union-testsuite]# stat -L /proc/$$/fd/5
	...
	Device: 23h/35d Inode: 13381       Links: 1
	...

After the patch:

	[root@andromeda union-testsuite]# bash 5</mnt/a/foo107
	[root@andromeda union-testsuite]# ls -l /proc/$$/fd/
	...
	lr-x------. 1 root root 64 Jun  5 14:22 5 -> /mnt/a/foo107
	[root@andromeda union-testsuite]# stat /mnt/a/foo107
	...
	Device: 23h/35d Inode: 40346       Links: 1
	...
	[root@andromeda union-testsuite]# stat -L /proc/$$/fd/5
	...
	Device: 23h/35d Inode: 40346       Links: 1
	...

Note the change in where /proc/$$/fd/5 points to in the ls command.  It was
pointing to /a/foo107 (which doesn't exist) and now points to /mnt/a/foo107
(which is correct).

The inode accessed, however, is the lower layer.  The union layer is on device
25h/37d and the upper layer on 24h/36d.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-19 03:19:32 -04:00
David Howells 63afdfc781 VFS: Handle lower layer dentry/inode in pathwalk
Make use of d_backing_inode() in pathwalk to gain access to an
inode or dentry that's on a lower layer.

Signed-off-by: David Howells <dhowells@redhat.com>
2015-05-11 08:13:10 -04:00
Linus Torvalds 1aef882f02 xfs: update for 4.1-rc1
This update contains:
 o RENAME_WHITEOUT support
 o conversion of per-cpu superblock accounting to use generic counters
 o new inode mmap lock so that we can lock page faults out of truncate, hole
   punch and other direct extent manipulation functions to avoid racing mmap
   writes from causing data corruption
 o rework of direct IO submission and completion to solve data corruption issue
   when running concurrent extending DIO writes. Also solves problem of running
   IO completion transactions in interrupt context during size extending AIO
   writes.
 o FALLOC_FL_INSERT_RANGE support for inserting holes into a file via direct
   extent manipulation to avoid needing to copy data within the file
 o attribute block header field overflow fix for 64k block size filesystems
 o Lots of changes to log messaging to be more informative and concise when
   errors occur. Also prevent a lot of unnecessary log spamming due to cascading
   failures in error conditions.
 o lots of cleanups and bug fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJVOE8oAAoJEK3oKUf0dfodx1kQAIIH8CwqcBrIslOntfHlFPHz
 P9aQl5uiI6JcnFqMiHG6mfnjWGpn+Z6XMDGIBwrSTzHj8IEnHTeXqYiS6SDPAnrH
 +VmlJEvW01ucAv7vcXKPrfutcc8dxLpy4fs63HOWmXh4rmrTcpel5S+0JSQxyGd6
 OriLg1nfD4Sid7R9CFEXAKLghJFK+gbao2CmT0wo6ZrTwiZl2p62Y187ou+d+u3k
 BRol99pI/Sp9bKpWZpUv3q2RnfD1v/k4oDP/JG4Ohdt2dx+nDqCjLvL8B5hJu74B
 ZI+R+N28sAkMmbtR61kk06F7MS9RZqzBNIZalugaSuspKoenDZzmURZX+i77ogPQ
 Ii3XLUMUzdwmi55/tBhpI7VkpFxahaEbWzTT1sMBh/Ka3GXO56BMIYTPvntjoN4w
 ElcbFAMAZl8O56ruGBnc/k72CfFbq8qp93KkOfBGIKwwiPN+eCK8bQYL4G3sIZzx
 f6k/WLbbShyViX9qoWLiX7qUfvh0NU/EcmGcJBsTmn0NFNOP4WmuojAq6SrvTgEz
 No6zYJtnJvEPDa/v5A0dZyYfLqz2cTkEyTM9uwSixcCa1qAS+8IBcCGgTKfQOYkV
 hCUWugiHwj4OQ/6WgP6oYLtIYdw6gqXgUKZy1Iy+ThDRwLbg9emYWixQTi4GAuRO
 2SEBbFGSk7KIpoPENDUC
 =WE6f
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs update from Dave Chinner:
 "This update contains:

   - RENAME_WHITEOUT support

   - conversion of per-cpu superblock accounting to use generic counters

   - new inode mmap lock so that we can lock page faults out of
     truncate, hole punch and other direct extent manipulation functions
     to avoid racing mmap writes from causing data corruption

   - rework of direct IO submission and completion to solve data
     corruption issue when running concurrent extending DIO writes.
     Also solves problem of running IO completion transactions in
     interrupt context during size extending AIO writes.

   - FALLOC_FL_INSERT_RANGE support for inserting holes into a file via
     direct extent manipulation to avoid needing to copy data within the
     file

   - attribute block header field overflow fix for 64k block size
     filesystems

   - Lots of changes to log messaging to be more informative and concise
     when errors occur.  Also prevent a lot of unnecessary log spamming
     due to cascading failures in error conditions.

   - lots of cleanups and bug fixes

  One thing of note is the direct IO fixes that we merged last week
  after the window opened.  Even though a little late, they fix a user
  reported data corruption and have been pretty well tested.  I figured
  there was not much point waiting another 2 weeks for -rc1 to be
  released just so I could send them to you..."

* tag 'xfs-for-linus-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
  xfs: using generic_file_direct_write() is unnecessary
  xfs: direct IO EOF zeroing needs to drain AIO
  xfs: DIO write completion size updates race
  xfs: DIO writes within EOF don't need an ioend
  xfs: handle DIO overwrite EOF update completion correctly
  xfs: DIO needs an ioend for writes
  xfs: move DIO mapping size calculation
  xfs: factor DIO write mapping from get_blocks
  xfs: unlock i_mutex in xfs_break_layouts
  xfs: kill unnecessary firstused overflow check on attr3 leaf removal
  xfs: use larger in-core attr firstused field and detect overflow
  xfs: pass attr geometry to attr leaf header conversion functions
  xfs: disallow ro->rw remount on norecovery mount
  xfs: xfs_shift_file_space can be static
  xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate
  fs: Add support FALLOC_FL_INSERT_RANGE for fallocate
  xfs: Fix incorrect positive ENOMEM return
  xfs: xfs_mru_cache_insert() should use GFP_NOFS
  xfs: %pF is only for function pointers
  xfs: fix shadow warning in xfs_da3_root_split()
  ...
2015-04-24 07:08:41 -07:00
Al Viro 8436318205 ->aio_read and ->aio_write removed
no remaining users

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:43 -04:00
Andrew Elble c1b8940b42 NFS: fix BUG() crash in notify_change() with patch to chown_common()
We have observed a BUG() crash in fs/attr.c:notify_change(). The crash
occurs during an rsync into a filesystem that is exported via NFS.

1.) fs/attr.c:notify_change() modifies the caller's version of attr.
2.) 6de0ec00ba ("VFS: make notify_change pass ATTR_KILL_S*ID to
    setattr operations") introduced a BUG() restriction such that "no
    function will ever call notify_change() with both ATTR_MODE and
    ATTR_KILL_S*ID set". Under some circumstances though, it will have
    assisted in setting the caller's version of attr to this very
    combination.
3.) 27ac0ffeac ("locks: break delegations on any attribute
    modification") introduced code to handle breaking
    delegations. This can result in notify_change() being re-called. attr
    _must_ be explicitly reset to avoid triggering the BUG() established
    in #2.
4.) The path that that triggers this is via fs/open.c:chmod_common().
    The combination of attr flags set here and in the first call to
    notify_change() along with a later failed break_deleg_wait()
    results in notify_change() being called again via retry_deleg
    without resetting attr.

Solution is to move retry_deleg in chmod_common() a bit further up to
ensure attr is completely reset.

There are other places where this seemingly could occur, such as
fs/utimes.c:utimes_common(), but the attr flags are not initially
set in such a way to trigger this.

Fixes: 27ac0ffeac ("locks: break delegations on any attribute modification")
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:24:34 -04:00
Al Viro e5b811e38a drop bogus check in file_open_root()
For one thing, LOOKUP_DIRECTORY will be dealt with in do_last().
For another, name can be an empty string, but not NULL - no callers
pass that and it would oops immediately if they would.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:24:32 -04:00
Namjae Jeon dd46c78778 fs: Add support FALLOC_FL_INSERT_RANGE for fallocate
FALLOC_FL_INSERT_RANGE command is the opposite command of
FALLOC_FL_COLLAPSE_RANGE that is needed for someone who wants to add
some data in the middle of file.

FALLOC_FL_INSERT_RANGE will create space for writing new data within
a file after shifting extents to right as given length. This command
also has same limitations as FALLOC_FL_COLLAPSE_RANGE in that
operations need to be filesystem block boundary aligned and cannot
cross the current EOF.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-03-25 15:07:05 +11:00
Linus Torvalds 05016b0f0a Merge branch 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull getname/putname updates from Al Viro:
 "Rework of getname/getname_kernel/etc., mostly from Paul Moore.  Gets
  rid of quite a pile of kludges between namei and audit..."

* 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  audit: replace getname()/putname() hacks with reference counters
  audit: fix filename matching in __audit_inode() and __audit_inode_child()
  audit: enable filename recording via getname_kernel()
  simpler calling conventions for filename_mountpoint()
  fs: create proper filename objects using getname_kernel()
  fs: rework getname_kernel to handle up to PATH_MAX sized filenames
  cut down the number of do_path_lookup() callers
2015-02-17 15:27:47 -08:00
Matthew Wilcox e748dcd095 vfs: remove get_xip_mem
All callers of get_xip_mem() are now gone.  Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
 Also remove mm/filemap_xip.c as it is now empty.  Also remove
documentation of the long-gone get_xip_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16 17:56:03 -08:00
Paul Moore 5168910413 fs: create proper filename objects using getname_kernel()
There are several areas in the kernel that create temporary filename
objects using the following pattern:

	int func(const char *name)
	{
		struct filename *file = { .name = name };
		...
		return 0;
	}

... which for the most part works okay, but it causes havoc within the
audit subsystem as the filename object does not persist beyond the
lifetime of the function.  This patch converts all of these temporary
filename objects into proper filename objects using getname_kernel()
and putname() which ensure that the filename object persists until the
audit subsystem is finished with it.

Also, a special thanks to Al Viro, Guenter Roeck, and Sabrina Dubroca
for helping resolve a difficult kernel panic on boot related to a
use-after-free problem in kern_path_create(); the thread can be seen
at the link below:

 * https://lkml.org/lkml/2015/1/20/710

This patch includes code that was either based on, or directly written
by Al in the above thread.

CC: viro@zeniv.linux.org.uk
CC: linux@roeck-us.net
CC: sd@queasysnail.net
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-23 00:22:20 -05:00
Linus Torvalds 0b233b7c79 Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "A comparatively quieter cycle for nfsd this time, but still with two
  larger changes:

   - RPC server scalability improvements from Jeff Layton (using RCU
     instead of a spinlock to find idle threads).

   - server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
     Schumaker, enabling fallocate on new clients"

* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd4: fix xdr4 count of server in fs_location4
  nfsd4: fix xdr4 inclusion of escaped char
  sunrpc/cache: convert to use string_escape_str()
  sunrpc: only call test_bit once in svc_xprt_received
  fs: nfsd: Fix signedness bug in compare_blob
  sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
  sunrpc: convert to lockless lookup of queued server threads
  sunrpc: fix potential races in pool_stats collection
  sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
  sunrpc: require svc_create callers to pass in meaningful shutdown routine
  sunrpc: have svc_wake_up only deal with pool 0
  sunrpc: convert sp_task_pending flag to use atomic bitops
  sunrpc: move rq_cachetype field to better optimize space
  sunrpc: move rq_splice_ok flag into rq_flags
  sunrpc: move rq_dropme flag into rq_flags
  sunrpc: move rq_usedeferral flag to rq_flags
  sunrpc: move rq_local field to rq_flags
  sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
  nfsd: minor off by one checks in __write_versions()
  sunrpc: release svc_pool_map reference when serv allocation fails
  ...
2014-12-16 15:25:31 -08:00
Heinrich Schuchardt 820c12d5d6 fallocate: create FAN_MODIFY and IN_MODIFY events
The fanotify and the inotify API can be used to monitor changes of the
file system.  System call fallocate() modifies files.  Hence it should
trigger the corresponding fanotify (FAN_MODIFY) and inotify (IN_MODIFY)
events.  The most interesting case is FALLOC_FL_COLLAPSE_RANGE because
this value allows to create arbitrary file content from random data.

This patch adds the missing call to fsnotify_modify().

The FAN_MODIFY and IN_MODIFY event will be created when fallocate()
succeeds.  It will even be created if the file length remains unchanged,
e.g.  when calling fanotify with flag FALLOC_FL_KEEP_SIZE.

This logic was primarily chosen to keep the coding simple.

It resembles the logic of the write() system call.

When we call write() we always create a FAN_MODIFY event, even in the case
of overwriting with identical data.

Events FAN_MODIFY and IN_MODIFY do not provide any guarantee that data was
actually changed.

Furthermore even if if the filesize remains unchanged, fallocate() may
influence whether a subsequent write() will succeed and hence the
fallocate() call may be considered a modification.

The fallocate(2) man page teaches: After a successful call, subsequent
writes into the range specified by offset and len are guaranteed not to
fail because of lack of disk space.

So calling fallocate(fd, FALLOC_FL_KEEP_SIZE, offset, len) may result in
different outcomes of a subsequent write depending on the values of offset
and len.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@parisplace.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:53 -08:00
Al Viro 9f45f5bf30 new helper: audit_file()
... for situations when we don't have any candidate in pathnames - basically,
in descriptor-based syscalls.

[Folded the build fix for !CONFIG_AUDITSYSCALL configs from Chen Gang]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:26 -05:00
J. Bruce Fields 56429e9b3b merge nfs bugfixes into nfsd for-3.19 branch
In addition to nfsd bugfixes, there are some fixes in -rc5 for client
bugs that can interfere with my testing.
2014-11-19 12:06:30 -05:00