Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Greg Kroah-Hartman 6f52b16c5b License cleanup: add SPDX license identifier to uapi header files with no license
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:19:54 +01:00
Andrey Vagin 457c79e544 netlink/diag: report flags for netlink sockets
cb_running is reported in /proc/self/net/netlink and it is reported by
the ss tool, when it gets information from the proc files.

sock_diag is a new interface which is used instead of proc files, so it
looks reasonable that this interface has to report no less information
about sockets than proc files.

We use these flags to dump and restore netlink sockets.

Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 07:13:56 -07:00
Fabien Siron 5fb384b066 netlink: Add comment to warn about deprecated netlink rings attribute request
Signed-off-by: Fabien Siron <fabien.siron@epita.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16 14:00:50 -07:00
Florian Westphal d1b4c689d4 netlink: remove mmapped netlink support
mmapped netlink has a number of unresolved issues:

- TX zerocopy support had to be disabled more than a year ago via
  commit 4682a03586 ("netlink: Always copy on mmap TX.")
  because the content of the mmapped area can change after netlink
  attribute validation but before message processing.

- RX support was implemented mainly to speed up nfqueue dumping packet
  payload to userspace.  However, since commit ae08ce0021
  ("netfilter: nfnetlink_queue: zero copy support") we avoid one copy
  with the socket-based interface too (via the skb_zerocopy helper).

The other problem is that skbs attached to mmaped netlink socket
behave different from normal skbs:

- they don't have a shinfo area, so all functions that use skb_shinfo()
(e.g. skb_clone) cannot be used.

- reserving headroom prevents userspace from seeing the content as
it expects message to start at skb->head.
See for instance
commit aa3a022094 ("netlink: not trim skb for mmaped socket when dump").

- skbs handed e.g. to netlink_ack must have non-NULL skb->sk, else we
crash because it needs the sk to check if a tx ring is attached.

Also not obvious, leads to non-intuitive bug fixes such as 7c7bdf359
("netfilter: nfnetlink: use original skbuff when acking batches").

mmaped netlink also didn't play nicely with the skb_zerocopy helper
used by nfqueue and openvswitch.  Daniel Borkmann fixed this via
commit 6bb0fef489 ("netlink, mmap: fix edge-case leakages in nf queue
zero-copy")' but at the cost of also needing to provide remaining
length to the allocation function.

nfqueue also has problems when used with mmaped rx netlink:
- mmaped netlink doesn't allow use of nfqueue batch verdict messages.
  Problem is that in the mmap case, the allocation time also determines
  the ordering in which the frame will be seen by userspace (A
  allocating before B means that A is located in earlier ring slot,
  but this also means that B might get a lower sequence number then A
  since seqno is decided later.  To fix this we would need to extend the
  spinlocked region to also cover the allocation and message setup which
  isn't desirable.
- nfqueue can now be configured to queue large (GSO) skbs to userspace.
  Queing GSO packets is faster than having to force a software segmentation
  in the kernel, so this is a desirable option.  However, with a mmap based
  ring one has to use 64kb per ring slot element, else mmap has to fall back
  to the socket path (NL_MMAP_STATUS_COPY) for all large packets.

To use the mmap interface, userspace not only has to probe for mmap netlink
support, it also has to implement a recv/socket receive path in order to
handle messages that exceed the size of an rx ring element.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ken-ichirou MATSUZAWA <chamaken@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 11:42:18 -05:00
Nicolas Dichtel 31e20bad8d diag: warn about missing first netlink attribute
The first netlink attribute (value 0) must always be defined as none/unspec.
This is correctly done in inet_diag.h, but other diag interfaces are wrong.

Because we cannot change an existing API, I add a comment to point the mistake
and avoid to propagate it in a new diag API in the future.

CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-28 18:16:43 -05:00
Patrick McHardy 4ae9fbee16 netlink: add RX/TX-ring support to netlink diag
Based on AF_PACKET.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:57:58 -04:00
Andrey Vagin eaaa313926 netlink: Diag core and basic socket info dumping (v2)
The netlink_diag can be built as a module, just like it's done in
unix sockets.

The core dumping message carries the basic info about netlink sockets:
family, type and protocol, portis, dst_group, dst_portid, state.

Groups can be received as an optional parameter NETLINK_DIAG_GROUPS.

Netlink sockets cab be filtered by protocols.

The socket inode number and cookie is reserved for future per-socket info
retrieving. The per-protocol filtering is also reserved for future by
requiring the sdiag_protocol to be zero.

The file /proc/net/netlink doesn't provide enough information for
dumping netlink sockets. It doesn't provide dst_group, dst_portid,
groups above 32.

v2: fix NETLINK_DIAG_MAX. Now it's equal to the last constant.

Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 12:38:03 -04:00