This reverts commit 963285b0b4 ("um: support some of
ARCH_HAS_SET_MEMORY"), as it turns out that it's not only not
working (due to um never using the protection bits in the
page tables) but also corrupts the page tables if used on a
non-vmalloc page, since um never allocates proper page tables
for the 'physmem' in the first place.
Fixing all this will take more effort, so for now revert it.
Reported-by: Benjamin Berg <benjamin@sipsolutions.net>
Fixes: 963285b0b4 ("um: support some of ARCH_HAS_SET_MEMORY")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
- IRQ handling cleanups
- Support for suspend
- Various fixes for UML specific drivers: ubd, vector, xterm
-----BEGIN PGP SIGNATURE-----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=t1mQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- IRQ handling cleanups
- Support for suspend
- Various fixes for UML specific drivers: ubd, vector, xterm
* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits)
um: Fix build w/o CONFIG_PM_SLEEP
um: time-travel: Correct time event IRQ delivery
um: irq/sigio: Support suspend/resume handling of workaround IRQs
um: time-travel: Actually apply "free-until" optimisation
um: chan_xterm: Fix fd leak
um: tty: Fix handling of close in tty lines
um: Monitor error events in IRQ controller
um: allocate a guard page to helper threads
um: support some of ARCH_HAS_SET_MEMORY
um: time-travel: avoid multiple identical propagations
um: Fetch registers only for signals which need them
um: Support suspend to RAM
um: Allow PM with suspend-to-idle
um: time: Fix read_persistent_clock64() in time-travel
um: Simplify os_idle_sleep() and sleep longer
um: Simplify IRQ handling code
um: Remove IRQ_NONE type
um: irq: Reduce irq_reg allocation
um: irq: Clean up and rename struct irq_fd
um: Clean up alarm IRQ chip name
...
For now, only support set_memory_ro()/rw() which we need for
the stack protection in the next patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In order to be able to experiment with suspend in UML, add the
minimal work to be able to suspend (s2idle) an instance of UML,
and be able to wake it back up from that state with the USR1
signal sent to the main UML process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
- Improve support for non-glibc systems
- Vector: Add support for scripting and dynamic tap devices
- Various fixes for the vector networking driver
- Various fixes for time travel mode
-----BEGIN PGP SIGNATURE-----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=OzDf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Improve support for non-glibc systems
- Vector: Add support for scripting and dynamic tap devices
- Various fixes for the vector networking driver
- Various fixes for time travel mode
* tag 'for-linus-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: vector: Add dynamic tap interfaces and scripting
um: Clean up stacktrace dump
um: Fix incorrect assumptions about max pid length
um: Remove dead usage of TIF_IA32
um: Remove redundant NULL check
um: change sigio_spinlock to a mutex
um: time-travel: Return the sequence number in ACK messages
um: time-travel: Fix IRQ handling in time_travel_handle_message()
um: Allow static linking for non-glibc implementations
um: Some fixes to build UML with musl
um: vector: Use GFP_ATOMIC under spin lock
um: Fix null pointer dereference in vector_user_bpf
It is possible to produce a statically linked UML binary with UML_NET_VECTOR,
UML_NET_VDE and UML_NET_PCAP options enabled using alternative libc
implementations, which do not rely on NSS, such as musl.
Allow static linking in this case.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In order to make adding configurable features into seccomp easier,
it's better to have the options at one single location, considering
especially that the bulk of seccomp code is arch-independent. An quick
look also show that many SECCOMP descriptions are outdated; they talk
about /proc rather than prctl.
As a result of moving the config option and keeping it default on,
architectures arm, arm64, csky, riscv, sh, and xtensa did not have SECCOMP
on by default prior to this and SECCOMP will be default in this change.
Architectures microblaze, mips, powerpc, s390, sh, and sparc have an
outdated depend on PROC_FS and this dependency is removed in this change.
Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/lkml/CAG48ez1YWz9cnp08UZgeieYRhHdqh-ch7aNwc4JRBnGyrmgfMg@mail.gmail.com/
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
[kees: added HAVE_ARCH_SECCOMP help text, tweaked wording]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/9ede6ef35c847e58d61e476c6a39540520066613.1600951211.git.yifeifz2@illinois.edu
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
changes to arch/sh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJfODUiAAoJELcQ+SIFb8Hau0wH/iPeZyv0EhIwL41OPrWhm5wb
26MNWPvPjYIpKVpr0HMXiffILv595ntvrH0Ujnh1+e8J2kRj0eT+T91UkoyGSfav
oWmjgcG3NRK6p9882Oo8Xavjr1cTTclOmmDInR4lpAcfIBXkeq2eX0R1h2IuGdNM
idGlXhJMkgV+xTlgZy7pYmw5pvFMqL5j7fAUQxm0UoY9kbu8Ac4bOR5WrqtFpkjt
xTh9141YvSSfpRx9uMzrQLuUYGzGePhnjUGSUf/b1deYG/33lNtzhHr+QMK6BpXr
zdhFalJP40+m+2tG0nCBpAIZcWiOLGb23in5n/trFx3BGZfUf5EKnhZEGUYeE7Q=
=XWDn
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, CONFIG_STATIC_LINK can be enabled with options which cannot
be statically linked, namely UML_NET_VECTOR, UML_NET_VDE, and
UML_NET_PCAP; this is because glibc tries to load NSS which does not
support being statically linked. So make CONFIG_STATIC_LINK depend on
!UML_NET_VECTOR && !UML_NET_VDE && !UML_NET_PCAP.
Link: https://lore.kernel.org/lkml/f658f317-be54-ed75-8296-c373c2dcc697@cambridgegreys.com/#t
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Instead of tracking all the various timer configurations,
modify the time-travel mode to have an event scheduler and
use a timer event on the scheduler to handle the different
timer configurations.
This doesn't change the function right now, but it prepares
the code for having different kinds of events in the future
(i.e. interrupts coming from other devices that are part of
co-simulation.)
While at it, also move time_travel_sleep() to time.c to
reduce the externally visible API surface.
Also, we really should mark time-travel as incompatible with
SMP, even if UML doesn't support SMP yet.
Finally, I noticed a bug while developing this - if we move
time forward due to consuming time while reading the clock,
we might move across the next event and that would cause us
to go backward in time when we then handle that event. Fix
that by invoking the whole event machine in this case, but
in order to simplify this, make reading the clock only cost
something when interrupts are not disabled. Otherwise, we'd
have to hook into the interrupt delivery machinery etc. and
that's somewhat intrusive.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Today, I erroneously built a time-travel configuration with btrfs
enabled, and noticed it cannot boot in time-travel=inf-cpu mode,
both xor and raid6 speed measurement gets stuck.
For xor, work around it by picking the first algorithm if inf-cpu
mode is enabled.
For raid6, I didn't find such a workaround, so disallow enabling
time-travel mode if RAID6_PQ_BENCHMARK is enabled.
With this, and RAID6_PQ_BENCHMARK disabled, I can boot a kernel
that has btrfs enabled in time-travel=inf-cpu mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Sometimes it can be useful to run with "time travel" inside the
UML instance, for example for testing. For example, some tests
for the wireless subsystem and userspace are based on hwsim, a
virtual wireless adapter. Some tests can take a long time to
run because they e.g. wait for 120 seconds to elapse for some
regulatory checks. This obviously goes faster if it need not
actually wait that long, but time inside the test environment
just "bumps up" when there's nothing to do.
Add CONFIG_UML_TIME_TRAVEL_SUPPORT to enable code to support
such modes at runtime, selected on the command line:
* just "time-travel", in which time inside the UML instance
can move faster than real time, if there's nothing to do
* "time-travel=inf-cpu" in which time also moves slower and
any CPU processing takes no time at all, which allows to
implement consistent behaviour regardless of host CPU load
(or speed) or debug overhead.
An additional "time-travel-start=<seconds>" parameter is also
supported in this case to start the wall clock at this time
(in unix epoch).
With this enabled, the test mentioned above goes from a runtime
of about 140 seconds (with startup overhead and all) to being
CPU bound and finishing in 15 seconds (on my slow laptop).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reverts commit b6024b21fe and
adjusts default stack sizing to cope with larger size of
floating point save registers on the newer Intel CPUs.
b6024b21fe replaced storing the
register state on the stack with kmalloc-ed storage. That has
a number of issues and a panic if that fails.
1. kmalloc/ATOMIC can fail. There was a latent hard crash
in all interrupt and fault handling as a result.
2. kmalloc in the interrupt path introduces a considerable
performance penalty for networking ~ 14% on iperf.
This commit restores uml to a stable state until a better
solution is found.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull UML updates from Richard Weinberger:
- DISCARD support for our block device driver
- Many TLB flush optimizations
- Various smaller fixes
- And most important, Anton agreed to help me maintaining UML
* 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove obsolete reenable_XX calls
um: writev needs <sys/uio.h>
Add Anton Ivanov to UML maintainers
um: remove redundant generic-y
um: Optimize Flush TLB for force/fork case
um: Avoid marking pages with "changed protection"
um: Skip TLB flushing where not needed
um: Optimize TLB operations v2
um: Remove unnecessary faulted check in uaccess.c
um: Add support for DISCARD in the UBD Driver
um: Remove unsafe printks from the io thread
um: Clean-up command processing in UML UBD driver
um: Switch to block-mq constants in the UML UBD driver
um: Make GCOV depend on !KCOV
um: Include sys/uio.h to have writev()
um: Add HAVE_DEBUG_BUGVERBOSE
um: Update maintainers file entry
This option restores the DEBUG_BUGVERBOSE functionality as it was
previous to commit 9a93848fe7 ("x86/debug: Implement __WARN() using
UD0").
Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
Now that all architectures include drivers/pcmcia/Kconfig where
the PCMCIA config is defined, the PCMCIA config entries in per-arch
Kconfig files are redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
All architecures use memblock for early memory management. There is no need
for the CONFIG_HAVE_MEMBLOCK configuration option.
[rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs]
Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx
[rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal]
Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx
[rppt@linux.vnet.ibm.com: remove stale #else and the code it protects]
Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any
kernel configuration and therefore it can be removed.
[alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init]
Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace bootmem initialization with memblock_add and memblock_reserve calls
and explicit initialization of {min,max}_low_pfn.
Link: http://lkml.kernel.org/r/1533326330-31677-7-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig. For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.
Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.
Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Merge arch/um/Kconfig.char and arch/um/Kconfig.net into a new
arch/um/drivers/Kconfig. This fits the way Kconfig files are placed
elsewhere in the kernel tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We can handle all not architecture specific UM configuration directly in
the newly added arch/um/Kconfig. Do so by merging the Kconfig.common,
Kconfig.rest and Kconfig.um files into arch/um/Kconfig, and move the main
UML menu as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Instead create a arch/um/Kconfig file that just includes the actual
per-arch Kconfig file. Note that we use HEADER_ARCH to find the
per-arch Kconfig file as that variable already includes the
normalization from i386 or x86_64 to x86.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile
is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>.
Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter
would be top-level one (and include the pieces of the former).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This patch implements a new freezer subsystem in the control groups
framework. It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.
The freezer subsystem in the container filesystem defines a file named
freezer.state. Writing "FROZEN" to the state file will freeze all tasks
in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup. Reading will return the current state.
* Examples of usage :
# mkdir /containers/freezer
# mount -t cgroup -ofreezer freezer /containers
# mkdir /containers/0
# echo $some_pid > /containers/0/tasks
to get status of the freezer subsystem :
# cat /containers/0/freezer.state
RUNNING
to freeze all tasks in the container :
# echo FROZEN > /containers/0/freezer.state
# cat /containers/0/freezer.state
FREEZING
# cat /containers/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
# echo RUNNING > /containers/0/freezer.state
# cat /containers/0/freezer.state
RUNNING
This is the basic mechanism which should do the right thing for user space
task in a simple scenario.
It's important to note that freezing can be incomplete. In that case we
return EBUSY. This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time. After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read. The state will remain
"FREEZING" until one of these things happens:
1) Userspace cancels the freezing operation by writing "RUNNING" to
the freezer.state file
2) Userspace retries the freezing operation by writing "FROZEN" to
the freezer.state file (writing "FREEZING" is not legal
and returns EIO)
3) The tasks that blocked the cgroup from entering the "FROZEN"
state disappear from the cgroup's set of tasks.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calculate TASK_SIZE at run-time by figuring out the host's VMSPLIT - this is
needed on i386 if UML is to run on hosts with varying VMSPLITs without
recompilation.
TASK_SIZE is now defined in terms of a variable, task_size. This gets rid of
an include of pgtable.h from processor.h, which can cause include loops.
On i386, task_size is calculated early in boot by probing the address space in
a binary search to figure out where the boundary between usable and non-usable
memory is. This tries to make sure that a page that is considered to be in
userspace is, or can be made, read-write. I'm concerned about a system-global
VDSO page in kernel memory being hit and considered to be a userspace page.
On x86_64, task_size is just the old value of CONFIG_TOP_ADDR.
A bunch of config variable are gone now. CONFIG_TOP_ADDR is directly replaced
by TASK_SIZE. NEST_LEVEL is gone since the relocation of the stubs makes it
irrelevant. All the HOST_VMSPLIT stuff is gone. All references to these in
arch/um/Makefile are also gone.
I noticed and fixed a missing extern in os.h when adding os_get_task_size.
Note: This has been revised to fix the 32-bit UML on 64-bit host bug that
Miklos ran into.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
avoid-overflows-in-kernel-timec.patch makes CONFIG_HZ necessary for a
successful build. UML lacks a definition, so this patch adds one. It also
changes the hard-wired definition of HZ to CONFIG_HZ.
Note: this patch is a good idea even in the absence of hpa's time fixes.
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the repetition of the NET symbol. It was once in UML specific options and
once in networking. I removed the first occurrence, as it makes more sense to
me to keep it only in networking.
It also removes a mostly empty file which is not used anymore and some
unused variables.
Signed-off-by: Karol Swietlicki <magotari@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SMP still needs to depend on BROKEN for now.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch updates links which broke during the transition to the new UML
website.
Signed-off-by: Karol Swietlicki <magotari@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.
Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Quoting Randy:
"It seems sad that this patch sources Kconfig.marker, a 7-line file,
20-something times. Yes, you (we) don't want to put those 7 lines into
20-something different files, so sourcing is the right thing.
However, what you did for avr32 seems more on the right track to me: make
_one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES,
and MARKERS and then use (source) that in all of the arches."
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable tickless support.
CONFIG_TICK_ONESHOT and CONFIG_NO_HZ are enabled.
itimer_clockevent gets CLOCK_EVT_FEAT_ONESHOT and an implementation of
.set_next_event.
CONFIG_UML_REAL_TIME_CLOCK goes away because it only makes sense when there is
a clock ticking away all the time. timer_handler now just calls do_IRQ once
without trying to figure out how many ticks to emulate.
The idle loop now needs to turn ticking on and off.
Userspace ticks keep happening as usual. However, the userspace loop keep
track of when the next wakeup should happen and suppresses process ticks until
that happens.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable CONFIG_GENERIC_CLOCKEVENTS.
timer_irq gets its name changed to timer_handler, and becomes the recipient of
timer signals.
The clock_event_device is set up to imitate the current ticking clock, i.e.
CLOCK_EVT_FEAT_ONESHOT is not enabled yet.
disable_timer now doesn't ignore SIGALRM and SIGVTALRM because that breaks
delay calibration.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Berg
Linus Torvalds
Arnd Bergmann
Ignat Korchagin
YiFei Zhu
Christoph Hellwig
Christian Brauner
Masahiro Yamada
Brendan Higgins
Amanieu d'Antras
Krzysztof Kozlowski
Masahiro Yamada
Enrico Weigelt, metux IT consult
Anton Ivanov
Hernán Gonzalez
Mike Rapoport
Al Viro
Matt Helsley
Al Viro
Jeff Dike
Karol Swietlicki
Mathieu Desnoyers
Matt LaPlante