Граф коммитов

661 Коммитов

Автор SHA1 Сообщение Дата
Mattias Wallin 92d50a4132 mfd: ab8500-core chip version cut 2.0 support
This patch adds support for chip version 2.0 or cut 2.0.
One new interrupt latch register - latch 12 - is introduced.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:18 +01:00
Mark Brown 180e4f5f20 mfd: Flag WM831x /IRQ as a wake source
The WM831x can generate wake events, some unconditionally, so flag
the primary IRQ as a wake source in order to help the CPU treat the
/IRQ signal appropriately.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:17 +01:00
Mark Brown c538ddbe4f mfd: Convert WM831x away from legacy I2C PM operations
Since the legacy bus PM operations are deprecated move the suspend
method over to dev_pm_ops.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:17 +01:00
MyungJoo Ham 337ce5d1c5 mfd: Support LP3974 RTC
The first releases of LP3974 have a large delay in RTC registers,
which requires 2 seconds of delay after writing to a rtc register
(recommended by National Semiconductor's engineers)
before reading it.

If "rtc_delay" field of the platform data is true, the rtc driver
assumes that such delays are required. Although we have not seen
LP3974s without requiring such delays, we assume that such LP3974s
will be released soon (or they have done so already) and they are
supported by "lp3974" without setting "rtc_delay" at the platform
data.

This patch adds delays with msleep when writing values to RTC registers
if the platform data has rtc_delay set.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:16 +01:00
MyungJoo Ham cdd137c9c8 mfd: MAX8998/LP3974 hibernation support
This patch makes the driver to save and restore register values
for hibernation.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:14 +01:00
Sundar Iyer 6680d940b8 mfd/ab8500: remove spi support
Since the Ab8500 v1.0, the SPI support is deprecated on the HW.

Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:14 +01:00
Mark Brown 1d83864cab mfd: Remove ARCH_U8500 dependency from AB8500
While it is vanishingly unlikely that the device will be deployed on other
architectures removing the dependency facilitates build testing when doing
generic work on both the MFD core for the device and the subsystem drivers.

There appears to be no actual code dependency.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:13 +01:00
Axel Lin 3ec33012dc mfd: Add __devexit annotation for vx855_remove
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:12 +01:00
Lennert Buytenhek c45c685c1a mfd: twl6030 irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:11 +01:00
Mark Brown 25a947f805 mfd: Convert Wolfson MFD drivers to use irq_data accessor function
Actually makes the code larger rathe rthan smaller but does provide some
isolation against core API changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:10 +01:00
Mark Brown 845aeab5f1 mfd: Convert TWL4030 to new irq_ APIs
The genirq core is being updated to pass struct irq_data to irq_chip
operations. Update the TWL4030 driver to the new APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:09 +01:00
Mark Brown 96e824bdf3 mfd: Convert tps6586x driver to new irq_ API
The genirq core is being updated to supply struct irq_data to irq_chip
operations rather than an irq number. Update the tps6586x driver to the
new APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:08 +01:00
Mark Brown 01af22eb15 mfd: Convert tc6393xb driver to new irq_ APIs
The genirq core is being update to pass struct irq_data to irq_chip rather
than an irq number to operations. Update tc6393 to the new API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:03 +01:00
Mark Brown a4e7feadcc mfd: Convert t7166xb driver to new irq_ API
The genirq core is being updated to pass struct irq_data rather than an
irq number to irq_chip operations. Update the t7166xb driver to the new
APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:02 +01:00
Mark Brown 43b8c08402 mfd: Convert SMTPE driver to new irq_ APIs
The genirq core is being updated to supply struct irq_data to irq_chip
operations rather than an irq number. Update the SMTPE driver to the new
APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:02 +01:00
Mark Brown 2898577e16 mfd: Convert MAX8998 driver to irq_ API
The genirq core is being updated to pass struct irq_data to interrupt
operations, update the MAX8998 driver to the new API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:01 +01:00
Mark Brown 98d9bc13cd mfd: Convert max8925 to new irq_ API
The genirq infrastructure is being converted to pass struct irq_data rather
than an irq number to irq_chip operations, update max8925 to the new APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:01 +01:00
Mark Brown 5af3bde8b2 mfd: Convert jz4740-adc to new irq_ methods
Convert the jz4740-adc driver to use the recently introduced IRQ API
variants which are passed struct irq_data rather than an IRQ number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:00 +01:00
Mark Brown e6a4c4a48a mfd: Convert HTC I2C CPLD driver to irq_ API
The genirq core is being converted to pass a struct irq_data to interrupt
operations rather than an IRQ number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:55 +01:00
Mark Brown 949b9decae mfd: Convert HTC EGPIO driver to irq_ API
The genirq core is being converted to pass a struct irq_data to interrupt
operations rather than an IRQ number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:54 +01:00
Lennert Buytenhek c232f22fc6 mfd: Convert ezx-pcap to new irq_ methods
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:53 +01:00
Mark Brown 9505a0a0ac mfd: Convert AB8500 to new irq_ methods
The genirq core is being converted to supply struct irq_data to chips
rather than the interrupt number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:53 +01:00
Mark Brown c91ad349d0 mfd: Convert AB3500 to new irq_ APIs
The genirq core is being updated to pass struct irq_data rather than irq
numbers into chip drivers. As part of the update assignments to NULL for
unused operations are removed, these are not needed and the genirq docs
should be good enough.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:52 +01:00
Mark Brown 0f76aaebe8 mfd: Convert ASIC3 to new irq_ APIs
The interrupt controller APIs are being updated to pass a struct irq_data
rather than the interrupt number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:52 +01:00
Mark Brown 49f89d9acb mfd: Convert 88PM860x driver to new irq_ APIs
The interrupt controller APIs are being updated to pass a struct irq_data
rather than the interrupt number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:51 +01:00
Mark Brown 8d2d3a3a32 mfd: Staticise internal functions in HTC I2CCPLD driver
Most of these are GPIO operations, though a couple are just internal only
functions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:51 +01:00
Mark Brown 87fff232cb mfd: Use NULL to initialise NULL pointers in ab8500-debugfs
Partly for coding style reasons, but mostly because sparse warns on it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:50 +01:00
Mark Brown fe421425d7 mfd: Correct ASIC3 IRQ_OWM resource setup
We should specify both a start and an end for the IRQ range rather than
initialise the start twice.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:50 +01:00
Mark Brown 59f2ad2e0e mfd: Staticise unexported symbols in ASIC3
There's no use of either of these outside of the driver so they can be
declared static.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:49 +01:00
Stephen Warren 4d1cdbf696 mfd: Remove tps6586x device ID check
... and convert it to a dev_info print at probe time.

There are many variants of this chip with different values of VERSIONCRC.
The set of values is large, and not useful to enumerate. All are SW
compatible. The difference lies in default settings of the various power
rails, and other similar differences. The driver, or clients of the
driver, shouldn't be affected by this, since all rails should be
programmed into the desired state in all cases for correct operation.

Derived-from-code-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:48 +01:00
Bryan Wu 5b9cecd68f mfd: Fix twl_probe section mismatch warning in mfd/twl-core.c
Fix the following section mismatch warning when building
omap2plus_defconfig:

WARNING: vmlinux.o(.data+0x47d7c): Section mismatch in reference
from the variable twl_driver to the function .init.text:twl_probe()

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:48 +01:00
Mattias Wallin e098aded79 mfd: ab8500-core ioresources irq for subdrivers added
This patch adds the ioresources used by subdrivers to
retrieve their interrupt.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:47 +01:00
Mattias Wallin 4f079985b2 mfd: ab8500-core wake up from suspend
This patch makes the system wake up from suspend when an
ab8500 interrupt occur. This can for example be USB cable
insert or an RTC alarm.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:47 +01:00
Mattias Wallin cca69b67b3 mfd: Export ab8500 chip id to sysfs
This patch adds a file into sysfs for reading out chip id.
It has been requested for modem silent reboot.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Ludovic Barre <ludovic.barre@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:46 +01:00
Mattias Wallin 6bce7bf1a1 mfd: ab8500-core improved error handling in get_chip_id
We check for dev before dereferencing it.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:46 +01:00
Andres Salomon 816b4580ce mfd: Fix cs5535 warning on x86-64
ARRAY_SIZE() returns size_t; use %zu instead of %d so that we don't
get warnings on x86-64.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:43 +01:00
Mark Brown d450f19eea mfd: Implement runtime PM for WM8994 core driver
Allow the WM8994 to completely power off, including disabling the LDOs
if they are software controlled, when it goes idle. The CODEC subdevice
controls activity for the MFD as a whole.

If the GPIOs need to be used while the device is active runtime PM
should be disabled for the device by machine specific code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:43 +01:00
Mark Brown 4c90aa94f6 mfd: Provide pm_runtime_no_callbacks flag in cell data
Allow MFD cells to have pm_runtime_no_callbacks() called on them during
registration. This causes the runtime PM framework to ignore them,
allowing use of runtime PM to suspend the device as a whole even if
not all drivers for the MFD can usefully implement runtime PM. For
example, RTCs are likely to run continuously regardless of the power
state of the system.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:42 +01:00
Mattias Wallin d7b9f3220f mfd: Fix ab8500-debug indentation errors
Replace spaces with proper tabs.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:42 +01:00
Mark Brown baa3f63b88 mfd: Convert WM8994 to new irq_ interrupt methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:41 +01:00
Mark Brown fdcc475b96 mfd: Convert WM835x to new irq_ interrupt methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:40 +01:00
Mark Brown ba81cd3933 mfd: Convert WM831x to new irq_ interrupt methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:40 +01:00
Mark Brown 412dc11d3f mfd: Add WM8326 support
The WM8326 is a high performance variant of the WM832x series with
no software visible differences.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:39 +01:00
Mark Brown 798e6e321f mfd: Simplify WM832x subdevice instantiation
All the current WM832x devices have the same set of subdevices so can
just use multiple case statements with a single body.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:39 +01:00
Joe Perches 3f3d4310bd mfd: Use printf extension %pR for struct resource
Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:38 +01:00
Andres Salomon f71e1afdd5 mfd: Add cs5535-mfd driver for AMD Geode's CS5535/CS5536 support
Add an MFD driver to handle the ISA device on CS5535 and CS5536
southbridges. This ISA bridge is actually multiple devices: GPIOs,
MFGPTs, etc.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:38 +01:00
Uwe Kleine-König e1b88eb0e0 mfd: Don't open-code mc13xxx_unlock
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:37 +01:00
Axel Lin 77b22897da mfd: Include <linux/gpio.h> instead of <asm/gpio.h>
As warned by checkpatch.pl, use #include <linux/gpio.h> instead
of <asm/gpio.h>.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:36 +01:00
Axel Lin f77401d4da mfd: Include <linux/io.h> instead of <asm/io.h>
As warned by checkpatch.pl, use #include <linux/io.h> instead of <asm/io.h>

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:36 +01:00
Joe Perches e0084aa9e0 mfd: Update WARN uses
Remove KERN_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:30 +01:00