The streaming field in struct vb2_queue is meant to be private and should
not be used by drivers directly, instead the vb2_is_streaming() function
should be used to check the videobuf2 queue streaming status.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The V4L2 documentation says that applications must call the VIDIOC_REQBUFS
ioctl to determine if a memory mapped, user pointer or DMABUF based I/O is
supported by the driver.
For example GStreamer does this by first calling VIDIOC_REQBUFS with count
zero for all the possible streaming I/O methods and then finally doing the
real VIDIOC_REQBUFS with count N using a known to be supported memory type.
But the driver prints an error on VIDIOC_REQBUFS if the memory type is not
supported which leads to the following errors that can confuse the users:
[ 178.704390] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported
[ 178.704666] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported
[ 178.714956] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported
[ 178.715229] vidioc_reqbufs:575: Only V4L2_MEMORY_MMAP is supported
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The function comment has an obvious typo error, so fix it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch fixes the error path in the driver probe, so in case of
any failure, the resources are not leaked.
Reported-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix Decoder and encoder video device double release in probe error path.
video_device_release(dev->vfd_dec) get called twice if decoder register
fails. Also, video_device_release(dev->vfd_enc) get called twice if encoder
register fails.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The VPU driver for hw video codec embedded in Mediatek's MT8173 SOCs.
It is able to handle video decoding/encoding of in a range of formats.
The driver provides with VPU firmware download, memory management and
the communication interface between CPU and VPU.
For VPU initialization, it will create virtual memory for CPU access and
IOMMU address for vcodec hw device access. When a decode/encode instance
opens a device node, vpu driver will download vpu firmware to the device.
A decode/encode instant will decode/encode a frame using VPU
interface to interrupt vpu to handle decoding/encoding jobs.
Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
[hans.verkuil@cisco.com: drop unnecessary ARM || ARM64 dependency]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Vertical flipping is available on both Gen2 and Gen3, while horizontal
flipping is only available on Gen3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Allow reconfiguration of the alpha value at runtime.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We don't need to walk the pipeline when propagating the alpha value as
all the information needed for propagation is already available from the
pipeline structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Allow reconfiguration of the look-up table and processing mode at
runtime.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Controls are applied to the hardware in the configure operation of the
VSP entities, which is only called when starting the video stream. To
enable runtime modification of controls we need to call the configure
operations for every frame. Doing so is currently not safe, as most
parameters shouldn't be modified during streaming. Furthermore the
configure operation can sleep, preventing it from being called from the
frame completion interrupt handler for the next frame.
Fix this by adding an argument to the configure operation to tell
entities whether to perform a full configuration (as done now) or a
partial runtime configuration. In the latter case the operation will
only configure the subset of parameters related to runtime-configurable
controls, and won't be allowed to sleep when doing so.
Because partial reconfiguration can depend on parameters computed when
performing a full configuration, the core guarantees that the configure
operation will always be called with full and partial modes in that
order at stream start. Entities thus don't have to duplicate
configuration steps in the full and partial code paths.
This change affects the VSP driver core only, all entities return
immediately from the configure operation when called for a partial
runtime configuration. Entities will be modified one by one in further
commits.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CLU processing block is a 2D/3D lookup table that converts the input
three color component data into desired three color components using a
lookup table.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Replace the custom ioctl with a V4L2 control in order to standardize the
API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The LUT mutex isn't initialized when creating the LUT, fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Freeing a fragment requires freeing DMA coherent memory, which can be
performed with interrupts disabled as per the DMA mapping API contract.
The fragments can't thus be freed synchronously when a display list is
recycled. Instead, move the fragments to a garbage list and use a work
queue to run the garbage collection.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Initialize the function field of all subdev entities instantiated by the
driver. This gets rids of multiple warnings printed by the media
controller core.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The LIF is only used when feeding the VSP output to the DU. The only way
to do so is by controlling the VSP directly from the DU driver and
disabling the VSP userspace API. There is thus no need to create a LIF
entity when the userspace API is enabled, as it can't be used in that
case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The media device doesn't need to be exposed to userspace when the VSP is
fully controlled by the DU driver. Don't register it in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check the entity pointer instead of the feature flag to see if the
entity is available before creating related links. The two methods are
currently equivalent, but will differ in the future as we implement
support for ignoring some of the entities present in the hardware.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The intensity control reused the V4L2_CID_CONTRAST control ID by
mistake. Fix it by using an ID from the device-specific IDs range.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The device is stopped when STREAMOFF is called on the last video node in
the pipeline. This results in possible memory corruption and/or crashes,
as userspace could free buffers while the hardware is still writing to
them, and the frame completion interrupt handler could try to access
buffers that don't exist anymore.
Fix this by stopping the pipeline upon the first STREAMOFF call, not the
last.
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The structures are never modified, make them const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The vsp1_pipeline wq field is a wait queue, not a work queue. Fix the
comment accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The vsp1_pipeline_reset() function loops over pipeline inputs and output
and resets them. When doing so it assumes both that the pipeline has
been correctly configured with an output, and that inputs are are stored
in the pipe inputs array at positions 0 to num_inputs-1.
Both the assumptions are incorrect. The pipeline might need to be reset
after a failed attempts to configure it, without any output specified.
Furthermore, inputs are stored in a positiong equal to their RPF index,
possibly creating holes in the inputs array if the RPFs are not used in
sequence.
Fix both issues by looping over the whole inputs array and skipping
unused entries, and ignoring the output when not set.
Fixes: ff7e97c94d ("[media] v4l: vsp1: Store pipeline pointer in rwpf")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The number of UDS and WPF are set to incorrect values, fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As the CEC core is currently at staging, it doesn't make any sense
to put a dependent driver outside staging. So, move it also to
staging.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The vivid driver has been extended to provide CEC adapters for the HDMI
input and HDMI outputs in order to test CEC applications.
This CEC emulation is faithful to the CEC timings (i.e., it all at a
snail's pace).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add CEC interface driver present in the Samsung Exynos range of
SoCs.
The following files were based on work by SangPil Moon:
- exynos_hdmi_cec.h
- exynos_hdmi_cecctl.c
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix rcar_vin_try_fmt's use of an inappropriate pad number when calling
the subdev set_fmt function - for the ADV7612, IDs should be non-zero.
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Reviewed-by: Rob Taylor <rob.taylor@codethink.co.uk>
[ulrich.hecht+renesas@gmail.com: adapted to rcar-vin rewrite]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add detection of source pad number for drivers aware of the media controller
API, so that rcar-vin can create device nodes to support modern drivers such
as adv7604.c (for HDMI on Lager) and the converted adv7180.c (for composite)
underneath.
Building rcar_vin gains a dependency on CONFIG_MEDIA_CONTROLLER, in
line with requirements for building the drivers associated with it.
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
[ulrich.hecht+renesas@gmail.com: adapted to rcar-vin rewrite]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Those structs are used only at bdisp-hw, so they shouldn't be
there in a header file that it is used elsewhere.
This fixes the following Gcc 6.1 warnings:
In file included from drivers/media/platform/sti/bdisp/bdisp-debug.c:11:0:
drivers/media/platform/sti/bdisp/bdisp-filter.h:207:65: warning: ‘bdisp_v_spec’ defined but not used [-Wunused-const-variable=]
static const struct __maybe_unused bdisp_filter_v_spec bdisp_v_spec[] = {
^~~~~~~~~
In file included from drivers/media/platform/sti/bdisp/bdisp-debug.c:11:0:
drivers/media/platform/sti/bdisp/bdisp-filter.h:23:65: warning: ‘bdisp_h_spec’ defined but not used [-Wunused-const-variable=]
static const struct __maybe_unused bdisp_filter_h_spec bdisp_h_spec[] = {
^~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Gcc 6.1 warns about some unused vars. Remove them:
drivers/media/platform/vivid/vivid-vid-cap.c:40:2: warning: 'tpf_default' defined but not used [-Wunused-const-variable=]
tpf_default = {.numerator = 1, .denominator = 30};
^~~~~~~~~~~
drivers/media/platform/vivid/vivid-sdr-cap.c:54:27: warning: 'NUM_FORMATS' defined but not used [-Wunused-const-variable=]
static const unsigned int NUM_FORMATS = ARRAY_SIZE(formats);
^~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Gcc 6.1 warns about some unused vars and functions. Remove them:
drivers/media/platform/exynos4-is/mipi-csis.c:665:46: warning: 's5pcsis_sd_internal_ops' defined but not used [-Wunused-const-variable=]
static const struct v4l2_subdev_internal_ops s5pcsis_sd_internal_ops = {
^~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/exynos4-is/mipi-csis.c:652:12: warning: 's5pcsis_open' defined but not used [-Wunused-function]
static int s5pcsis_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
^~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The DRM driver has switched to the new API, remove the deprecated macros
and inline wrapper.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The vsp1_du_atomic_update_ext() function takes 7 RPF configuration
parameters, and more will likely be added later. This makes the code
difficult to read and error-prone as multiple parameters have the same
type.
Make the API safer and easier to extend in the future by grouping all
parameters in a structure. Use macro magic to ease the transition to the
new function by allowing the old and new functions to be called using
the same name. The macros and static inline wrapper will be removed as
soon as the caller is updated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The frame sequence number is global to the pipeline, there's no need to
store copies in each video node.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Turn the helper into a function that can retrieve crop and compose
selection rectangles.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add a macro to cast from a struct media_entity to a struct vsp1_entity
to replace the manual implementations.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The output node value indicates the value to be used in a sampling point
register to use the node as the source of histogram data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On some platforms the VSP performs memory accesses through an FCP. When
that's the case get a reference to the FCP from the VSP DT node and
enable/disable it at runtime as needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The power domain performs functional clock handling when using runtime
PM, there's no need to enable and disable the clock manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The FCP is a companion module of video processing modules in the
Renesas R-Car Gen3 SoCs. It provides data compression and decompression,
data caching, and conversion of AXI transactions in order to reduce the
memory bandwidth.
The driver is not meant to be used standalone but provides an API to the
video processing modules to control the FCP.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/platform/rcar-vin/rcar-core.c: In function 'rvin_graph_notify_complete':
drivers/media/platform/rcar-vin/rcar-core.c:65:22: warning: variable 'sd' set but not used [-Wunused-but-set-variable]
struct v4l2_subdev *sd;
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A V4L2 driver for Renesas R-Car VIN driver that do not depend on
soc_camera. The driver is heavily based on its predecessor and aims to
replace it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We don't need to request the sizeimage or num_planes
in try_fmt.
Signed-off-by: ayaka <ayaka@soulik.info>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The encoder forget the work to call hardware to release its buffers.
This patch came from chromium project. I just change its code
style and make the API match with new kernel.
Signed-off-by: ayaka <ayaka@soulik.info>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
User-space applications can use the VIDIOC_REQBUFS ioctl to determine if a
memory mapped, user pointer or DMABUF based I/O is supported by the driver.
So a set of VIDIOC_REQBUFS ioctl calls will be made with count 0 and then
the real VIDIOC_REQBUFS call with count == n. But for count 0, the driver
not only frees the buffer but also closes the MFC instance and s5p_mfc_ctx
state is set to MFCINST_FREE.
The VIDIOC_REQBUFS handler for the output device checks if the s5p_mfc_ctx
state is set to MFCINST_INIT (which happens on an VIDIOC_S_FMT) and fails
otherwise. So after a VIDIOC_REQBUFS(n), future VIDIOC_REQBUFS(n) calls
will fails unless a VIDIOC_S_FMT ioctl calls happens before the reqbufs.
But applications may first set the format and then attempt to determine
the I/O methods supported by the driver (for example Gstramer does it) so
the state won't be set to MFCINST_INIT again and VIDIOC_REQBUFS will fail.
To avoid this issue, only free the buffers on VIDIOC_REQBUFS(0) but don't
close the MFC instance to allow future VIDIOC_REQBUFS(n) calls to succeed.
[javier: Rewrote changelog to explain the problem more detailed]
Signed-off-by: ayaka <ayaka@soulik.info>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Nicolas Dufresne <nicolas@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Failing to get the struct s5p_mfc_pm .clock is a non-fatal error so the
clock field can have a errno pointer value. But s5p_mfc_final_pm() only
checks if .clock is not NULL before attempting to unprepare and put it.
This leads to the following warning in clk_put() due s5p_mfc_final_pm():
WARNING: CPU: 3 PID: 1023 at drivers/clk/clk.c:2814 s5p_mfc_final_pm+0x48/0x74 [s5p_mfc]
CPU: 3 PID: 1023 Comm: rmmod Tainted: G W 4.6.0-rc6-next-20160502-00005-g5a15a49106bc #9
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c010e1bc>] (unwind_backtrace) from [<c010af28>] (show_stack+0x10/0x14)
[<c010af28>] (show_stack) from [<c032485c>] (dump_stack+0x88/0x9c)
[<c032485c>] (dump_stack) from [<c011b8e8>] (__warn+0xe8/0x100)
[<c011b8e8>] (__warn) from [<c011b9b0>] (warn_slowpath_null+0x20/0x28)
[<c011b9b0>] (warn_slowpath_null) from [<bf16004c>] (s5p_mfc_final_pm+0x48/0x74 [s5p_mfc])
[<bf16004c>] (s5p_mfc_final_pm [s5p_mfc]) from [<bf157414>] (s5p_mfc_remove+0x8c/0x94 [s5p_mfc])
[<bf157414>] (s5p_mfc_remove [s5p_mfc]) from [<c03fe1f8>] (platform_drv_remove+0x24/0x3c)
[<c03fe1f8>] (platform_drv_remove) from [<c03fcc70>] (__device_release_driver+0x84/0x110)
[<c03fcc70>] (__device_release_driver) from [<c03fcdd8>] (driver_detach+0xac/0xb0)
[<c03fcdd8>] (driver_detach) from [<c03fbff8>] (bus_remove_driver+0x4c/0xa0)
[<c03fbff8>] (bus_remove_driver) from [<c01886a8>] (SyS_delete_module+0x174/0x1b8)
[<c01886a8>] (SyS_delete_module) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c)
Assign the pointer to NULL in case of a lookup failure to fix the issue.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch fixes build break caused by lack of dma-iommu API on ARM64
(this API is specific to ARM 32bit architecture).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
This patch adds support for IOMMU to s5p-mfc device driver. MFC firmware
is limited and it cannot use the default configuration. If IOMMU is
available, the patch disables the default DMA address space
configuration and creates a new address space of size limited to 256M
and base address set to 0x20000000.
For now the same address space is shared by both 'left' and 'right'
memory channels, because the DMA/IOMMU frameworks do not support
configuring them separately. This is not optimal, but besides limiting
total address space available has no other drawbacks (MFC firmware
supports 256M of address space per each channel).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This patch removes custom code for initialization and handling of
reserved memory regions in s5p-mfc driver and replaces it with generic
reserved memory regions api.
s5p-mfc driver now handles two reserved memory regions defined by
generic reserved memory bindings. Support for non-dt platform has been
removed, because all supported platforms have been already converted to
device tree.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
All multimedia devices found on Exynos SoCs support only contiguous
buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory
allocator to correctly create contiguous memory mappings.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The s5p_mfc_probe() function registers the video devices before all the
resources needed by s5p_mfc_open() are correctly initalized.
So if s5p_mfc_open() function is called before s5p_mfc_probe() finishes
(since the video dev is already registered), a NULL pointer dereference
will happen due s5p_mfc_open() accessing uninitialized vars such as the
struct s5p_mfc_dev .watchdog_timer and .mfc_ops fields.
An example is following BUG caused by add_timer() getting a NULL pointer:
[ 45.765374] kernel BUG at kernel/time/timer.c:790!
[ 45.765381] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
[ 45.766149] [<c016fdf4>] (mod_timer) from [<bf181d18>] (s5p_mfc_open+0x274/0x4d4 [s5p_mfc])
[ 45.766416] [<bf181d18>] (s5p_mfc_open [s5p_mfc]) from [<bf0214a0>] (v4l2_open+0x9c/0x100 [videodev])
[ 45.766547] [<bf0214a0>] (v4l2_open [videodev]) from [<c01e355c>] (chrdev_open+0x9c/0x178)
[ 45.766575] [<c01e355c>] (chrdev_open) from [<c01dceb4>] (do_dentry_open+0x1e0/0x300)
[ 45.766595] [<c01dceb4>] (do_dentry_open) from [<c01ec2f0>] (path_openat+0x800/0x10d4)
[ 45.766610] [<c01ec2f0>] (path_openat) from [<c01ed8b8>] (do_filp_open+0x5c/0xc0)
[ 45.766624] [<c01ed8b8>] (do_filp_open) from [<c01de218>] (do_sys_open+0x10c/0x1bc)
[ 45.766642] [<c01de218>] (do_sys_open) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c)
[ 45.766655] Code: eaffffe3 e3a00001 e28dd008 e8bd81f0 (e7f001f2)
Fix it by registering the video devs as the last step in s5p_mfc_probe().
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
When s5p_mfc_remove() calls put_device() for the reserved memory region
devs, the driver core warns that the dev doesn't have a release callback:
WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90
Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed.
Also, the declared DMA memory using dma_declare_coherent_memory() isn't
relased so add a dev .release that calls dma_release_declared_memory().
Cc: <stable@vger.kernel.org>
Fixes: 6e83e6e25e ("[media] s5p-mfc: Fix kernel warning on memory init")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The devices don't have a name set, so makes dev_name() returns NULL which
makes harder to identify the devices that are causing issues, for example:
WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90
Device '(null)' does not have a release() function, it is broken and must be fixed.
And after setting the device name:
WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90
Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed.
Cc: <stable@vger.kernel.org>
Fixes: 6e83e6e25e ("[media] s5p-mfc: Fix kernel warning on memory init")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.
However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.
Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.
This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.
Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.
I was using this definition for testing:
#define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))
which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.
I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.
[ Updated the 9p parts as per Al Viro - Linus ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building the exynos-gsc driver with CONFIG_OF disabled, we get
a warning about an out-of-bounds access:
drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_probe':
drivers/media/platform/exynos-gsc/gsc-core.c:1078:34: error: array subscript is above array bounds [-Werror=array-bounds]
This is harmless because the driver will never be used without CONFIG_OF,
but it's better to avoid the warning anyway. Checking the return value
of of_alias_get_id() for an error condition is probably a good idea
anyway, and it makes sure the compiler can verify that we don't get
into that situation.
Fixes: 26a7ed9c18 ("[media] exynos-gsc: remove an always false condition")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
c8sectpfe driver relied on CONFIG_FW_LOADER_USER_HELPER_FALLBACK option
for loading its xp70 firmware. A previous commit removed this Kconfig
option, as it is apparently harmful, but did not update the driver
code which relied on it.
This patch reworks the firmware loading into the start_feed callback.
At this point we can be sure the rootfs is present, thereby removing
the depedency on CONFIG_FW_LOADER_USER_HELPER_FALLBACK.
Fixes: 79f5b6ae96 ('[media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK')
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
During the review process, a regression was intoduced in the
circular buffer write pointer management. This means that wp
doesn't get managed properly once the buffer becomes full.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXL7HfAAoJEHm+PkMAQRiGYe8IAJBGaPUq38EJh2YOV+AQf9v6
t/alhwB3DUE1E0zjLy7I7JJ+xDXtKjZh9fS6OFuIS8Q3RIrBteIJ/oH8TPpt7yZ/
SnP6rYPvYD6CImTyrh7+ORL/udEwJX8+YqFYAgUAq167gvpDjYj8r26VzdIaIN4/
oBbL8NrQNWfODieywYyhUoitVhwMz09zmBfLtGVks4vd2jUJk2Fdd9cOtGV5tRfk
DPndPgyQtbr8W0mKovV8sT9WkQeV5TsUr4MLgf7hjnAGYQ8+0KamkzzVVLBeBiiw
uazyrOCFkddZp+N7KbmbOmazV/yULRuLGgDjVKazoCsOaKOvoGCzrCk7daOPy6Q=
=CegX
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rc7' into patchwork
Linux 4.6-rc7
* tag 'v4.6-rc7': (185 commits)
Linux 4.6-rc7
parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls
x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
mailmap: add John Paul Adrian Glaubitz
byteswap: try to avoid __builtin_constant_p gcc bug
lib/stackdepot: avoid to return 0 handle
mm: fix kcompactd hang during memory offlining
modpost: fix module autoloading for OF devices with generic compatible property
proc: prevent accessing /proc/<PID>/environ until it's ready
mm/zswap: provide unique zpool name
mm: thp: kvm: fix memory corruption in KVM with THP enabled
MAINTAINERS: fix Rajendra Nayak's address
mm, cma: prevent nr_isolated_* counters from going negative
mm: update min_free_kbytes from khugepaged after core initialization
huge pagecache: mmap_sem is unlocked when truncation splits pmd
rapidio/mport_cdev: fix uapi type definitions
mm: memcontrol: let v2 cgroups follow changes in system swappiness
mm: thp: correct split_huge_pages file permission
maintainers: update rmk's email address(es)
writeback: Fix performance regression in wb_over_bg_thresh()
...
of_graph_get_next_endpoint(node, ep) decrements refcount on
ep. When next==NULL we break and refcount on ep is decremented
again.
Signed-off-by: Franck Jullien <franck.jullien@odyssee-systemes.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 0c426c472b ("[media] media: Always
keep a graph walk large enough around") changed
media_device_register_entity() function to take mdev->graph_mutex. This
causes deadlock in driver probe, which calls (indirectly) this function
with ->graph_mutex taken. This patch removes taking ->graph_mutex in
driver probe to avoid deadlock. Other drivers don't take ->graph_mutex
for entity registration, so this change should be safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 0c426c472b ("[media] media: Always
keep a graph walk large enough around") changed
media_device_register_entity() function to take mdev->graph_mutex. This
causes deadlock in driver probe, which calls (indirectly) this function
with ->graph_mutex taken. This patch removes taking ->graph_mutex in
driver probe to avoid deadlock. Other drivers don't take ->graph_mutex
for entity registration, so this change should be safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The test pattern generator will be used by other drivers as the virtual
media controller (vimc)
Signed-off-by: Helen Mae Koike Fornazier <helen.koike@collabora.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The v4l2_rect helper functions have been moved to
include/media/v4l2-rect.h. Use this new header, dropping the functions
from vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The maximum image size supported by the WPF is 2048x2048 on Gen2 and
8190x8190 on Gen3. Update the code accordingly, and fix the maximum LIF
size for both Gen2 and Gen3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The format is erroneously defined with an alpha channel. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make the global alpha multiplier of DRM planes configurable. All the
necessary infrastructure is there, we just need to store the alpha value
passed through the DRM API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Make the Z-order of planes configurable by assigning RPFs to BRU inputs
dynamically based on the Z-order position.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The Gen3 RPF includes an alpha multiplier that can both multiply the
alpha channel by a fixed global alpha value, and multiply the pixel
components to convert the input to premultiplied alpha.
As alpha premultiplication is available in the BRU for both Gen2 and
Gen3 we handle it there and use the Gen3 alpha multiplier for global
alpha multiplication only. This prevents conversion to premultiplied
alpha if no BRU is present in the pipeline, that use case will be
implemented later if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Synchronize the userspace LUT setup with the pipeline operation by using
a display list fragment to store LUT data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Display lists support up to 8 bodies but we currently use a single one.
To support preparing display lists for large look-up tables, add support
for multi-body display lists.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vsp1_dl_list_put() function expects to be called with the display
list manager lock held. This assumption is correct for calls from within
the vsp1_dl.c file, but not for the external calls. Fix it by taking the
lock inside the function and providing an unlocked version for the
internal callers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The field takes positive values only, make it unsigned.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The LUT set format handler overrides the requested format by mistake.
Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Most of the entities can't perform scaling and implement the same frame
size enumeration function. Factorize the code into a single
implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Most of the entities can't perform format conversion and implement the
same media bus enumeration function. Factorize the code into a single
implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
All entities implement the same get pad format handler, factorize it
into a common function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The RPF entities are located at the very beginning of pipelines, they
can't be target nodes in the Data Path Router matrix. Remove their input
ID from the routing table.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of embedding pipelines in the vsp1_video objects allocate them
on demand when they are needed. This fixes the streamon race condition
where pipelines objects from different video nodes could be used for the
same pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Move the pipeline initialization and cleanup functions to prepare for
the next commit. No functional code change is performed here.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This prepares for dynamic pipeline allocation by providing a field that
can be used to store the pipeline pointer atomically under driver
control.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pass the pipe explicitly instead of retrieving it through media
entities. This decouples device state stored in the pipeline from the
active state stored in entities, preparing for dynamic pipeline
creation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The primary purpose of those functions is to build the pipeline, rename
them to make this clearer.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Modules write register values to the active display list pointed to by
the pipeline. In order to support preparing display lists ahead of time,
pass them explicitly to all configuration functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reuse the runtime logic to initialize the default format instead of
open-coding it. This ensures coherency between intialization and
runtime.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas
Marek Szyprowski
Shuah Khan
Tiffany Lin
Andrew-CT Chen
Laurent Pinchart
Mauro Carvalho Chehab
Hans Verkuil
Kamil Debski
Ulrich Hecht
Niklas Söderlund
ayaka
Peter Ujfalusi
Arnd Bergmann
Peter Griffin
Mauro Carvalho Chehab
Franck Jullien
Helen Mae Koike Fornazier
Simon Horman